Catalogue Sheet: RS Series

Catalogue Sheet: RS Series
Type:
new product
Project/Location:
Contractor:
Prepared By:
Date:
Model No.:
Made in Canada
TYPICAL SPECIFICATIONS
• Metal construction using Canadian
cold-rolled steel
• Based on a modular design, this
product comes pre-assembled for
quick, easy installation
• Long-life white LED light source
• Meets or exceeds CSA 22.2 No.14110 standard for pictogram exit signs
• Two-wire universal AC input: 120 to
347VAC; two-wire standard DC input:
6 to 24VDC
• Energy efficient – consumes less than
2.5W in AC mode and only 1W in
DC-remote
• Self-powered model delivers standard
two hours of back-up lighting
• Universal mounting – end, wall
or ceiling
• Easy access to wiring entry for all
mounting options
• Canopy mounting system designed
specifically for ease of installation
• Also available with power pack;
see RSC catalogue sheet
DIMENSIONS
Dimensions are approximate and subject to change.
< PICTOGRAM
LEFT FROM HERE
PICTOGRAM
STRAIGHT FROM HERE
PICTOGRAM >
RIGHT FROM HERE
45/8” [11.7 cm]
87/8” [22.4 cm]
FEATURES
75/8” [19.2 cm]
All Metal Pictogram Exit Sign
73/8” [18.7 cm]
RS SERIES
Supply and install the Ready-Lite® RS Series pictogram Exit Signs. The equipment shall operate with
universal 2-wire AC input voltage of 120 to 347VAC at less than 2.5W and universal 2-wire DC input
voltage from 6 to 24VDC at 1W consumption for single and double face signs. The sign shall be suitable
for wall, end, or ceiling mount. The frame and back plate shall each be of one-piece steel construction.
The faceplate(s) shall be constructed of robust clear polycarbonate panels with a border coloured factorywhite. The light source shall be white light-emitting diodes (LED) and shall provide even illumination in
normal and emergency operation. The pictogram Exit Sign in a Self-powered configuration shall use a sealed
Nickel-Cadmium battery of 2.4V nominal voltage and shall stay illuminated during emergency operation for
at least two hours upon AC failure.
The Exit Sign shall be listed CSA 22.2 No.141-10.
The equipment shall be Ready-Lite® Model:
.
121/8” [30.7 cm]
133/8” [33.9 cm]
21/8” [5.3 cm]
WIRE GUARDS
460.0079-RL
wall mount
460.0027-RL
End mount
460.0028-RL
ceiling mount
POWER CONSUMPTION
MODEL
AC SPECS
DC SPECS
AC-only
120 to 347VAC
less than 2.5W
-
-
AC/DC standard
120 to 347VAC
less than 2.5W
6 to 24VDC
less than 1W
AC/Special DC
120 to 347VAC
less than 2.5W
36, 48, 120VDC
less than 2.5W
Two-wire 120V AC/DC
120VAC
less than 2.5W
120VDC
less than 2.5W
self-powered
120 to 347VAC
less than 2.5W
nickel-cadmium battery
min. 2 hours
ORDERING INFORMATION
SERIES
RS= steel pictogram exit sign
FACES / MOUNTING
1= s ingle face
universal mounting
2= d
ouble face
universal mounting
3= u
niversal face,
universal mounting
COLOUR
W= factory white
B= black
G= grey
VOLTAGE
U= 120 to 347VAC; 6 to 24VDC
SP= self-powered, 120 to 347VAC
U00= 120 to 347VAC only
U36= 120 to 347VAC; 36VDC
U48= 120 to 347VAC; 48VDC
U120= 120 to 347VAC; 120VDC
2120= 2-wires 120VAC/VDC
OPTIONS
TP= tamper-proof screws*
VR= v andal-resistant shield and
tamper-proof screws*
* Price per face. Option VR not available on
universal face
*990.0119-RL= T
amper-proof bit (sold separately)
Other colours available
EXAMPLE: RS1WUTP
42
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement