5856_MF

5856_MF
Item _____________________________________
Quantity _________________________________
MF
CSI Section 11400
Approved ________________________________
Built-In Remote Milk Or Beverage Dispensers
Date _____________________________________
Models
•
MF-2821
Remote built-in dispenser with capacity for 126 half pint cartons
•
MF-31
Remote built-in dispenser with capacity for 252 half pint cartons
•
MF-44
Remote built-in dispenser with capacity for 378 half pint cartons
•
MF-57
Remote built-in dispenser with capacity for 504 half pint cartons
Standard Features
• Exterior body and frame to be galvanized
steel
• Units insulated with foamed in place
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane
• 1” IPS drain
• Opening throat liner to be high impact plastic
• Self-leveling mechanisms shall be adjustable
by adding and removing stainless steel
extension springs located inside the elevator
housing
• (6) Anodized aluminum divider trays per
opening
• Dispenser platform carrier shall be stainless
steel and removable for cleaning
• Insulated folding lid, stainless steel and high
impact plastic
• An expansion valve and copper tubing
connection to remote refrigeration system
is provided
• One year parts and 90 day labor standard
warranty
MF-31
Options &
Accessories
•
•
•
•
Lid locking device
Wire baskets
Lexan® covers
Special refrigerants (contact factory)*
* Inclusion of this option will alter electrical
specifications of the unit
Specifications
The exterior bottom, sides and top edge shall be galvanized
steel.
NOTE: Temperature and pressure controls are not provided on
remote models.
Inner liner shall be water tight and constructed of stainless
steel with a 1.25” (3cm) I.P.S. drain. Opening(s) shall have throat
liners constructed of high impact plastic. Unit to be insulated
with foamed-in-place environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion Potential), Non GWP
(Global Warming Potential) polyurethane insulation with a
non-conductive breaker strip.
The following applies to models MF-2821, MF-31, MF-44
and MF-57 only. (6) anodized aluminum divider trays will
be supplied per opening. See chart on back for milk storage
capacity.
Each opening shall have an insulated, stainless steel folding lid
with high impact plastic liner, molded rubber edge and black
plastic handles.
Each self-leveling mechanism shall be field adjustable by
adding or removing stainless steel extension springs in the
elevator housing inside the unit. The elevators shall be
connected by removable platform carriers constructed of
stainless steel.
Refrigeration system (to provided by others) shall use HFC-134a
refrigerant. An expansion valve and copper tubing connection
to the remote refrigeration system shall be provided.
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
MF: Built-In Remote Milk Or Beverage Dispensers
Project ___________________________________
26.25”
67cm
26.25”
67cm
28.00”
71cm
14.50”
37cm
Plan View
MF-31
Plan View
MF-2821
28.25”
72cm
28.25”
72cm
Elevation View
MF-2821
Elevation View
MF-31
26.25”
67cm
26.25”
67cm
55.00”
140cm
41.50”
105cm
MF
Built-In Remote Milk Or Beverage Dispensers
Plan View
MF-44
28.25”
72cm
Plan View
MF-57
28.25”
72cm
Elevation View
MF-44
Elevation View
MF-57
End View
MF-2821, MF-31,
MF-44 & MF-57
Specifications
Cutout Dimension
(Length X Depth)
Half Pint Carton
Capacity
Recommended
H.P.
BTU Load
Evap
Temp
Ship Weight
MF-2821
(1) 10.75 x 21.00”
(1) 27cm x 53cm
126
1/4
260
30˚F
-1˚C
197lbs
89kg
MF-31
(2) 10.75 x 21.00”*
(2) 27cm x 53cm*
252
1/4
300
30˚F
-1˚C
238lbs
108kg
MF-44
(3) 10.75 x 21.00”*
(3) 27cm x 53cm
378
1/4
410
30˚F
-1˚C
312lbs
142kg
MF-57
(4) 10.75 x 21.00”*
(4) 27cm x 53cm*
504
1/4
520
29˚F
-2˚C
335lbs
152kg
Model
*Requires 2.75” (7cm) between each cutout
Delfield reserves the right to make changes to the design or specifications without prior notice.
980 S. Isabella Rd.
Mt. Pleasant, Michigan 48858
Phone: 800-733-8948 or 989-773-7981
Fax: 800-669-0619
www.delfield.com
Printed in the U.S.A.
5856_MF
04/15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement