Adams Rite 4600 W/ 2190 Door Lock Installation Instructions

The Adams Rite 4600 W/ 2190 Door Lock is a versatile and secure door lock that can be used in a variety of applications. It features a variety of options, such as a monitor switch, a holdback feature, and adjustable backset. The lock can be installed on both wood and metal doors.

PDF Download
Document
Adams Rite 4600 W/ 2190 Installation Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Monitor switch
  • Holdback feature
  • Adjustable backset
  • Installation on wood and metal doors
  • Multiple installation options
  • Interconnect cam

Frequently asked questions

To change the handing of the lock, you will need to remove the cover and flip the direction rack. Make sure the drive gear stays in the same position. You will also need to re-orient the inter-connect cam.

To install a monitor switch, you will need to install the switch as shown in Detail-A with two M1.6x.35mm pan head screw.

To adjust the backset, you will need to loosen the two #4-40 flat head screw securing the adjustable cover on the back of the trim cartridge. You can then slide the adjustable cover under the screw head and push it toward the nose edge of the door until it stops. You can then re-tighten the two #4-40 flat head screws.

To install a dummy handle, you will need to insert a 3/16"x9/16" dowel pin into the hole as shown.

To release the holdback feature, you will need to turn the key 315° to retract the latchbolt. You can then push up the holdback button to release the latchbolt.
Preparing document for printing…
0%