GoPro Hero 3+ Black Edition User manual

U s e r
M a n u a l
1
Join the GoPro party at facebook.com/gopro to see
what other GoPro owners are capturing and sharing.
Share your footage and join the GoPro movement!
2
table of contents
Accessories
4
Mounts + Accessories
5
HERO3 Features
6
Camera LCD Status Screen
8
Camera User Interface Flow Chart
9
Software Updates
10
Basics
10
Camera Modes
13
Camera Settings
21
Delete
29
Capture Settings
31
Set Up
38
Wireless Controls
46
Storage/SD Cards
48
System Requirements
49
Transferring Files
50
Playback
51
Battery Life
53
Important Warning Messages
55
Camera Assembly
56
Customer Support
62
3
wear it. mount it. love it.
Premium ACcessories
hero3 ACcessories
Wrist Housing
LCD Touch BacPac™
Replacement Housing
Rechargeable Li-Ion Battery
Battery BacPac™
Lens Replacement Kit
Caps + Doors
Wi-Fi Remote
32GB/16GB microSD™
The Frame Mount
(HERO3 accessory)
4
More HERO3 accessories available at gopro.com.
see more at gopro.com
Mounts + ACcessories
Helmet Front
Mount
Chest Mount
Harness
Handlebar/Seatpost/
Pole Mount
Surfboard Mounts
Floaty Backdoor
Head Strap
Suction Cup Mount
Vented Helmet
Strap
Roll Bar Mount
Tripod Mount
Anti-Fog Inserts
Grab Bag of
Mounts
Curved + Flat
Adhesive Mounts
Side Mount
Camera Tethers
Wi-Fi Remote
Mounting Kit
5
HERO3 FeaTures
1. Status Indicator Lights (Red)
2. SHUTTER/SELECT Button
3. LCD Status Screen
4. Wi-Fi Indicator Light (Blue )
5. POWER/MODE Button
6
6. Micro HDMI Port
(Cable not included)
7. microSDTM Card Slot
(SD card not included)
8. mini-USB Port
(Supports Composite A/V
cable/3.5mm stereo mic adapter,
not included)
HERO3 Features
9. HERO Port
10. Battery Door
11. Wi-Fi ON/OFF Button
12. Audio Alert
7
camera lcd status screen
The LCD screen displays the following information about HERO3 modes and settings:
1. Camera Modes/FOV (Field of View)
2. Capture Setting Modes (not shown)
3. Resolution/FPS (Frames Per Second)
4. Time Interval Settings: (not shown)
5. Counter
6. Time/Storage/Files
7. Battery Life
Note: T he icons displayed above will vary depending on what mode your camera is in.
8
camera user interface flow chart
MODES
CAMERA SETTINGS
CAPTURE SETTINGS
WI-FI
SET UP
*Note: White Balance and Playback only appear in your camera display if
Protune™ mode is turned ON or Playback is activated.
9
software UPDATES
G
oPro adds new product updates through software updates.
Check to see if any updates are available for your camera or other
GoPro products. Visit: gopro.com/update.
USING YOUR HERO3: BASICS
GETTING STARTED
Before using your HERO3 for the first time:
1. Insert a microSD, microSDHC™ or microSDXC™ card into the card slot
with label facing forward, narrowest part of the card first. Speed Class
4 or higher cards are recommended. When using 0.5 second Time Lapse or
recording video in Protune mode, a Speed Class Rating 10 is required.
2. Place battery into the camera.
3. Charge battery. The included lithium-ion battery comes partially charged. To
charge, connect the included USB cable to camera and connect the other end
of the cable to a power source such as a computer, GoPro Wall Charger or
GoPro Auto Charger. No damage will occur to the camera or battery if used
prior to a full charge.
PRO
TIP:
Status Indicator Lights when camera is OFF and
charging, show:
• Status Indicator Lights are ON when charging.
• Status Indicator Lights are OFF when charging is complete.
▶See BATTERY LIFE for more information.
▶See PROTUNE for more information.
10
USING YOUR HERO3: basics
CAMERA Default SETTINGS
The HERO3 Silver Edition camera powers up with the following default settings:
PRO
TIP:
Video Resolution
1080p30fps
Photo Resolution
11 Megapixels (MP)
Photo Burst
10 photos in 1 second
Time Lapse
0.5 seconds
Wi-Fi
OFF
Want to change your VIDEO and PHOTO settings?
▶See SETTINGS menu to make changes.
11
USING YOUR HERO3: Basics
POWERING ON AND OFF
To power ON:
Press and release
. The red Status Indicator Lights flash three times and
the Sound Indicator emits three beeps.
To power OFF:
Press
for two seconds, then release. The red Status Indicator Lights flash
several times and the Sound Indicator emits seven beeps.
PRO
TIP:
Want to turn your HERO3 into a “one-button” camera that
automatically starts recording PHOTOS or VIDEOS once it
turns ON? Set the camera to ONE BUTTON mode.
▶See ONE BUTTON mode for more information.
12
USING YOUR HERO3: camera modes
Overview
The HERO3 features several camera modes. To cycle through the modes, press
The modes will appear in the following order:
PRO
TIP:
.
video
Record Video
photo
Capture single Photo
Photo burst
Capture Burst photos
time lapse
Capture Time Lapse photos
PLAYBACK
Appears only if the camera is plugged into a TV/HDTV.
Playback allows you to play Photos and Videos on
a TV/HDTV (via optional Micro HDMI cable or A/V
composite cable).
Use PHOTO BURST to capture fast moving subjects.
▶See PLAYBACK for more information.
13
USING YOUR HERO3: camera modes
Video
To record Video, verify the camera is in Video mode. If the Video
icon on
your camera’s LCD screen is not showing, press
repeatedly until it appears.
To start recording:
Press and release
. The camera will emit one beep and the red Status
Indicator Lights will flash while recording.
To stop recording:
Press and release
. The red Status Indicator Lights flash three times and the
camera emits three beeps to indicate recording has stopped.
The HERO3 automatically stops recording when the memory card is full or the
battery is out of power. Your video will be saved before the camera powers OFF.
▶See VIDEO mode for instructions on how to change resolution settings.
14
USING YOUR HERO3: camera modes
PHOTO
To capture a Photo, verify the camera is in Photo mode. If the Photo
icon on
your camera’s LCD is not showing, press
repeatedly until it appears.
To take a photo:
Press and release
. The camera beeps two times and the red Status
Indicator Lights flash.
▶See PHOTO modes for instructions on how to change resolution settings and
other PHOTO features.
15
USING YOUR HERO3: CAMERA MODES
photo burst
In Photo Burst mode your camera takes multiple photos in short time intervals—
3 photos/1 sec, 5 photos/1 sec, 10 photos/1 sec or 10 photos/2 seconds.
To capture a Photo Burst series, verify the camera is in Photo Burst mode. If the
Photo Burst
icon on your camera’s LCD screen is not showing, press
repeatedly until it appears.
To take a Photo Burst series:
. The red Status Indicator Lights flash and the camera
Press and release
beeps multiple times.
PRO
TIP:
Sometimes 30 photos/1 second is too fast. Try a slower
PHOTO BURST setting to better match the action.
▶See PHOTO BURST for instructions on how to change the interval settings.
16
USING YOUR HERO3: camera modes
time lapse
Time Lapse mode captures a series of photos at 0.5, 1, 2, 5, 10, 30 or 60 second
intervals. When using the 0.5 seconds setting, an SD card with a Speed Class 10
Rating is required.
To capture a Time Lapse series, verify the camera is in Time Lapse mode. If the
Time Lapse
icon is not showing on your camera’s LCD screen, press
repeatedly until it appears.
To take Time Lapse:
Press and release
. The camera initiates countdown and the red Status Indicator
Lights flash each time a Photo is taken.
To stop Time Lapse:
Press and release
. The red Status Indicator Lights flash three times and the
camera emits three beeps to indicate that Time Lapse has stopped.
▶See TIME LAPSE for instructions on how to change the interval settings.
17
USING YOUR HERO3: CAMERA MODES
Settings
The Settings menu allows you to adjust a variety of camera settings including:
Video Resolution
Photo Resolution
Time Lapse
Photo Burst
• and more
▶See SETTINGS menu to make changes, learn how to navigate menu options
and read more details on each setting.
18
USING YOUR HERO3: CAMERA MODES
playback
You can playback your GoPro Photos and Videos on a TV/HDTV or with the LCD
Touch BacPac (optional accessory). Playback appears as a camera mode when
camera is powered ON and plugged into a TV/HDTV.
▶See PLAYBACK for more information on viewing your VIDEOS and PHOTOS.
19
CAMERA settings
Settings
To enter the Settings menu:
1. Verify the camera is in the Settings menu. If the Setting
icon on your
camera’s LCD screen is not showing, press
repeatedly until it appears.
2. Press
3. Use
4. Press
to enter
to select desired option.
5. To exit, hold down
PRO
TIP:
20
menu.
to cycle through the various Settings options.
for two seconds or cycle through to
and press
.
If at any time you wish to exit from the SETTINGS menu, press
and hold
for two seconds.
camera settings
Video Resolution/FPS/FOV Modes
You can change Resolution, FPS and View Angle (FOV) for your HERO3
camera when using Video mode. This mode contains sub-level menu options.
Once in the Settings menu:
1. Press
2. Use
3. Press
4. Use
to enter
.
to cycle through options.
to enter desired menu.
to cycle through each sub-menu option and
to select.
5. To change additional options, repeat step 4.
6. T o exit, hold down
press
.
for two seconds or cycle through to
and
21
camera settings
The HERO3 Silver Edition offers the following Video Capture modes:
Video
Resolution
NTSC
fps
PAL
fps
Protune
Field of View
(FOV)
Screen Resolution
1080p
30fps
25fps
Yes
Ultra Wide,
Medium,
Narrow
1920x1080
16:9
1080p
24fps
24fps
Yes
Ultra Wide,
Medium,
Narrow
1920x1080
16:9
960p
48fps
50fps
Yes
Ultra Wide
1280x960
4:3
960p
30fps
25fps
Yes
Ultra Wide
1280x960
4:3
720p
60fps
50fps
Yes
Ultra Wide
1280x720
16:9
720p
30fps
25fps
No
Ultra Wide
1280x720
16:9
WVGA
120fps
100fps
No
Ultra Wide
800x480
16:9
22
camera settings
Video
Resolution
Best Use
1080p
Use this mode when camera is mounted on a vehicle tripod or other
stable object.
1080p
Good for television and productions.
960p
Use for body-mounted shots and when slow motion is desired.
Provides the largest viewing area and smoothest results for high
action capture.
960p
High-quality 4:3 video. Good when shooting in low light
conditions. Use for body-mounted shots.
720p
Best resolution frame rate for handheld shots and when slow
motion is desired.
720p
Best resolution for handheld shots and low light conditions. Choose
this mode when camera is mounted on vehichle, tripod or other
stable object.
WVGA
For smaller data files, this is standard definition resolution. Also
good when super slow motion is desired.
PRO
TIP:
Setting the PROTUNE mode to ON allows for high-quality capture,
neutral color and 24fps video for professional video production.
▶See PROTUNE for more information.
23
Camera SETTINGS
PHOTO resolution modes
The HERO3 can capture photos at 11MP, 8MP and 5MP resolutions. Any change
to photo resolution also affects photos captured in Photo, Photo Burst and
Time Lapse modes.
Photo
Resolution
Field of View
(FOV)
11MP
Wide (Default)
8MP
Wide
5MP
Wide
5MP
Medium
24
camera settings
PHOTO BURST options
Photo Burst mode captures series of Photos when
can be captured in the following rates:
is pressed. Photos
3 photos in 1 second
5 photos in 1 second
10 photos in 1 second (Default)
10 photos in 2 seconds
TIME LAPSE
Several time interval options are available for Time Lapse mode, including
0.5, 1, 2, 5, 10, 30 and 60 seconds.
25
camera settings
CAPTURE SETTINGS MENU
Capture Settings allows you to adjust the following advanced camera settings:
Camera Orientation
Spot Meter
Looping Video
Protune
White Balancece
▶See CAPTURE SETTINGS section for a complete list of capture options.
26
camera settings
SET UP MENU
The Set Up menu allows you to adjust the following camera settings:
Default mode at Power Up
One Button Mode
NTSC/PAL
On Screen Display
Status Indicator Lights
Sound Indicator
Month/Day/Year/Time
▶See SET UP menu section for a complete list of set up options.
27
camera settings
wireless controls
The HERO3 camera’s built-in Wi-Fi allows you to connect to the Wi-Fi Remote
or smartphone/tablet via the GoPro App. When Wi-Fi is ON, your Wi-Fi
Status Indicator Light will blink blue.
To turn Wi-Fi ON/OFF:
to turn Wi-Fi ON/OFF. The most recently used Wi-Fi mode will be
Press
active when Wi-Fi is ON.
▶See WIRELESS CONTROLS section for a complete list of wireless functions.
28
Camera SETTINGS
delete
Delete the last file or all files and format the memory card. During delete LAST or
ALL, the Status Indicator Lights blink until operation is complete.
cancel (Default)
last
all
To delete LAST or ALL:
icon on your
1. V
erify the camera is in Settings mode. If the Settings
camera’s LCD screen is not showing, press
repeatedly until it appears.
2. Press
3. Use
4. Press
5. Use
to enter Settings menu.
to cycle through Settings to locate
to cycle through options.
6. Select highlighted option by pressing
7. To exit, hold down
PRO
TIP:
.
to enter Delete.
.
for two seconds or cycle through to
and press
.
Use caution — by selecting ALL, the memory card will be
formatted, deleting every file on your SD card.
29
camera settings
EXIT
From the
PRO
TIP:
30
screen, press
to exit the Settings menu.
If at any time you wish to exit from the SETTINGS menu, press
and hold
for two seconds.
Capture Settings
CApture Settings
To enter the Capture Settings menu:
1. Verify the camera is in Settings mode. If the Settings
icon on your
camera’s LCD screen is not showing, press
repeatedly until it appears.
2. Press
3. Use
4. Press
5. Use
6. Press
to enter
.
to cycle through Settings to locate
to locate the desired option to change.
to select the desired option.
7. S
ome options have a sub-menu. Use
8. Press
.
to enter Capture Settings.
to cycle through the sub-menus.
to select a highlighted option.
9. To exit, hold down
press
.
for two seconds or cycle through to
and
31
capture settings
You can customize the way your HERO3 camera captures Video and Photos in the
Capture Settings menus, such as Upside Down, Looping Video and White Balance.
upside down
Mounting your HERO3 Upside Down but wish the files to appear upright when
viewing or editing? This setting eliminates the need to flip your Video or Photos
after recording.
Camera right side up (Default)
Camera upside down
Spot Meter
Turn on Spot Meter when filming from within a dark space pointing the
camera into a brighter setting, such as filming the outdoors from within a car.
When Spot Meter is set to ON,
appears in the LCD window.
OFF
ON
32
(Default)
capture settings
Looping Video
Looping Video mode allows you to record a continuously looping video that
button to stop it. Looping Video is
overwrites itself until you press the
not available if Protune mode is turned ON.
Looping Video options inlcude:
OFF
(Default)
Max video
Camera records until memory card is full, then overwrites with a
new video.
5 min video
Camera records for 5 minutes, then begins a new video,
progressively overwriting the previous 5 minute video.
20 min video
Camera records for 20 minutes, then begins a new video,
progressively overwriting the previous 20 minute video.
60 min video
Camera records for 60 minutes, then begins a new video,
progressively overwriting the previous 60 minute video.
120 min video
Camera records for 120 minutes, then begins a new video,
progressively overwriting the previous 120 minute video.
PRO
TIP:
Multiple chapter files are written to your memory card. This
allows for small segments of content to be overwritten during
loop recording. When viewing on a computer screen you will see
separate files for each time segment. Use video editing software if
you wish to combine files into a longer video.
Note: Looping Video is not enabled when in Protune mode.
33
capture settings
PROTUNE
The HERO3 camera can record video in Protune mode. Protune is a video mode
that unlocks the camera’s full potential, yielding stunning image quality and
cinema-caliber video for professional productions. Content creators now have far
more flexibility and workflow efficiency than ever before.
PROTUNE KEY BENEFITS INCLUDE:
High-Quality Image Capture
Protune’s high data rate captures images with less compression, giving content
creators higher quality for professional productions.
Neutral Color
Protune’s neutral color profile offers more flexibility during post-production color
correction. Protune’s log curve captures more detail in shadows and highlights.
Film/TV Frame Rate Standard
Record video in cinema-quality 24fps and easily intercut GoPro content with other
source media without the need to perform fps conversion.
Turning Protune ON affects several settings and features, such as Video
Resolution, fps, and FOV.
OFF
ON
34
(Default)
capture settings
PROTUNE RESOLUTIONS (continued):
Protune is available in the following HERO3 Silver Edition resolutions:
RESOLUTION
FPS
1080p
30, 25, 24
960p
50, 48, 30, 25
720p
60, 50
COMPATIBILITY: Protune is compatible with professional color correction tools,
editing programs and GoPro CineForm Studio.
35
capture settings
White balance
White Balance adjusts the overall color tone of videos recorded in Protune
mode. White Balance will only be available if Protune is turned ON. The
default White Balance setting is AUTO. When capturing in any White
Balance setting other than AUTO, you may need to color correct your video
with an editing program to achieve your desired color. Only use a non-AUTO
White Balance setting if your are an advanced user.
Consider manually setting WHITE BALANCE to the following settings
when operating in the following conditions:
PRO
TIP:
Incandescent or sunrise/sunset lighting
3000K
Daylight or sunlit shooting
5500K
Cool white fluorescent skylight lighting
6500K
Optimized color files
Cam RAW
Cam RAW
The HERO3 camera can record Video in Protune mode in Cam RAW. GoPro
Cam RAW mode yields a minimally processed data file direct from the image
sensor that allows for more precise adjustments to be made in post-process.
Working in this mode takes full advantage of the image sensor’s capabilities.
PRO
TIP:
36
PROTUNE uses AUTO WHITE BALANCE and will override
any AUTO WHITE BALANCE setting.
capture settings
EXIT
From the EXIT screen press
PRO
TIP:
to exit the Capture Settings menu.
If at any time you wish to exit from the CAPTURE SETTINGS
menu, press and hold
for two seconds.
37
Set up
Set up
To enter the Set Up menu:
1. Verify the camera is in Settings mode. If the Settings
icon on your
camera’s LCD screen is not showing, press
repeatedly until it appears.
2. Press
3. Use
4. Press
5. Use
6. Press
to enter
.
to enter Set Up.
to locate the desired option to change.
to select the desired option.
7. To exit, hold down
.
press
38
.
to cycle through Settings to locate
for two seconds or cycle through to
and
set up
default mode at power up
You can set the camera’s Default mode of power up to any of the following modes:
(factory default)
39
set up
One Button
With One Button mode selected, the camera automatically begins recording when
powering the camera ON. One Button mode can be configured to start in Video
or Time Lapse.
OFF
(Default)
ON
To turn One Button mode ON:
icon on your
1. Verify the camera is in Settings mode. If the Settings
camera’s LCD screen is not showing, press
repeatedly until it appears.
2. Press
3. Use
4. Press
5. Use
6. Press
7. Use
8. Press
to enter
menu.
to cycle through Settings to locate
.
to enter Set Up.
to cycle through to locate
.
to enter One Button menu.
to cycle through options.
to select a highlighted option.
9. To exit, hold down
for two seconds or cycle through to
and press
ext time you power your camera ON, it will begin recording in its Default
N
Power Up Mode. To stop recording, push and hold
for two seconds.
40
.
set up
ONE BUTTON MODE (continued)
To exit One Button mode:
1. Power camera ON.
2. Press and hold
3. Press
4. Use
5. Press
shows in the LCD window.
to highlight OFF.
to select.
6. To exit, hold down
press
.
PRO
TIP:
until
to enter.
for two seconds or cycle through to
and
To stop the capture process (VIDEO or TIME LAPSE) when in
ONE BUTTON, press and hold
for two seconds. You will
return to the ONE BUTTON menu where you can turn
ONE BUTTON mode OFF.
Note: One Button mode is disabled when connected to Wi-Fi Remote or GoPro App.
41
set up
ntsc / pal
The NTSC and PAL settings govern Video recording frame rate and playback
when viewing Video on a TV/HDTV. Select NTSC when viewing a TV/HDTV in
North America. Select PAL if viewing on a PAL TV/HDTV (most televisions
outside of North America) or if viewing on a PAL TV/HDTV in any region.
NTSC (Default)
PAL
1080p/30fps
1080p/25fps
1080p/24fps
1080p/24fps
960p/48fps
960p/50fps
960p/30fps
960p/25fps
720p/60fps
720p/50fps
720p/30fps
720p/25fps
WVGA/120fps
WVGA/120fps
ONSCREEN DISPLAY
To display or hide the recording icons and file information on Video or the
viewing screen during playback, turn Onscreen Display (OSD) OFF or ON.
OFF
ON
42
(Default)
set up
Status Indicator Lights
Keep all four Status Indicator Lights active, only two active (front and back)
or turn OFF all lights.
4
(Default)
2
OFF
Sound Indicator
You can adjust volume or turn OFF the Sound Indicator.
100%
(Default)
70%
OFF
Manual Power Off
The HERO3 can be configured to automatically power OFF after a specific
period of inactivity (when no Videos or Photos are being taken and no
buttons have been pressed).
MANUAL
(Default)
60 sec
120sec
300 sec
43
set up
Month / DaY / YEAR / Time
Set the HERO3 clock to ensure Video and Photo files are saved with the
correct date and time.
To change Month/Day/Year/Time:
icon on your
1. Verify the camera is in Settings mode. If the Settings
camera’s LCD screen is not showing, press
repeatedly until it appears.
2. Press
3. Use
4. Press
5. Use
to enter
menu.
to cycle through Settings to locate
.
to enter Set Up.
to locate
.
6. Press
to enter Month/Day/Year/Time sub-menu; Month (MM) will
be highlighted.
7. Press
8. Use
9. Press
to access the list of months (1 to 12).
to cycle through list until desired selection is highlighted.
to select.
10. To advance to the next option, press
.
11. R
epeat steps 7, 8 and 9 to make selections for day (DD), year (YY), hour
(HH) and minutes (MM).
12. T o exit, hold down
press
.
for two seconds or cycle through to
Note: If the battery is removed from the camera for an extended period of time
Month/Day/Year/Time will need to be set again.
44
and
set up
EXIT
From the EXIT screen, press
PRO
TIP:
to exit the Set Up menu.
If at any time you wish to exit from the SET UP menu, press
and hold
for two seconds.
45
wiRELESS CONTROLS
wireless controls
The built-in Wi-Fi allows your HERO3 camera to connect to the Wi-Fi Remote
and smartphone/tablet via the GoPro App.
To turn Wi-Fi ON/OFF via the Wi-Fi button:
until blue lights flash. When turning Wi-Fi ON the Wi-Fi
Press and hold
mode will be set to the most recently used mode.
USING HERO3 WITH THE WI-FI REMOTE (OPTIONAL ACCESSORY)
Connect your HERO3 with the Wi-Fi Remote to control your camera remotely.
The Wi-Fi Remote can control up to 50 cameras at a time at distances of up to
600’/180m in optimal conditions.
1. Power ON the HERO3 and turn Wi-Fi ON.
2. Press
3. Press
4. Use
5. Press
to cycle through to the Settings menu.
to enter
8. Use
.
again to enter the sub-menu.
to select Wi-Fi RC.
9. Press
to select it.
10. Use
to select CURRENT or NEW.
11. Press
46
.
to enter Wireless Controls.
6. You will see
7. Press
.
to cycle through to locate
to select desired option.
WIRELESS CONTROLS
WIRELESS CONTROLS (Continued)
On your Wi-Fi Remote:
1. Press
to turn ON the GoPro Wi-Fi Remote.
2. While holding
3. O
nce you see
, press and release
.
, you can release
.
will appear once the Wi-Fi Remote and camera have
4. A check
successfully paired.
The Wi-Fi Remote’s LCD screen will now mirror the HERO3 LCD screen.
USING THE HERO3 WITH THE GOPRO APP
The GoPro App lets you control your camera remotely using a smartphone or
tablet. Features include full camera control of all settings, live video preview to
your smartphone or tablet for easy shot framing and more.
The GoPro App is available for free at the Apple App Store and is coming soon
to Google Play.
PRO
TIP:
, see what your HERO3 camera sees by
Before you hit
viewing it on your smartphone or tablet’s screen.
▶See gopro.com for more information.
47
storage/microsd cards
The HERO3 camera is compatible with 2GB, 4GB, 8GB, 16GB, 32GB and 64GB
capacity microSD, microSDHC and microSDXC memory cards. While all speed class
ratings are compatible, GoPro requires using an SD card with Speed Class Rating
10 or higher speed when recording in Protune mode, or when using the 0.5 Time
Lapse setting. GoPro recommends using brand name memory cards for maximum
reliability in high-vibration activities.
To insert SD card:
To remove SD card:
1. Slide memory card into card slot
with label facing front of camera.
1. Place fingernail against edge of
memory card and lightly press
further into camera.
2. The card will click into place when
fully inserted.
PRO
TIP:
Use care when handling memory cards. Avoid liquids, dust and
debris. As a precaution, turn off the camera before inserting or
removing the card. Check manufacturer guidelines regarding use
in acceptable temperature ranges.
▶See PROTUNE for more information.
48
2. Card will spring out far enough to
be removed.
system requirements
The HERO3 camera is compatible with Microsoft® XP (Service Pack 2 or later)
and Mac OS X 10.4.11 or later.
Windows
Mac
Windows XP (Service Pack 2 or later)
or Vista
Mac OS® X 10.4.11 or later
3.2GHz Pentium 4 or faster
2.0GHz Intel Core Duo or faster
DirectX 9.0c or later
Minimum 1GB of system RAM
Minimum 1GB of system RAM
Video card with minimum 256MB
of RAM
Video card with minimum 128MB
of RAM
PRO
TIP:
Want to see your footage and stills on the big screen? Plug
your HERO3 directly into a TV/HDTV with GoPro’s Micro HDMI
cable or USB cable (optional accessories).
49
Transferring files
TO TRANSFER VIDEO AND PHOTO FILES TO A COMPUTER
On a PC:
1. Connect the camera to the computer using included USB cable.
2. Press
to turn ON the camera.
3. Double click “My Computer” and locate “Removable Disk”.
4. If “Removable Disk” is not showing, close “My Computer” folder and
reopen it. The “Removable Disk” icon should appear.
5. Double click “Removable Disk” icon.
6. Double click “DCIM” folder icon.
7. Double click “100GOPRO” icon to view all Photo or Video files.
8. Copy/move files to the computer or external hard drive.
On a Mac:
1. Connect the camera to Mac using included USB cable.
2. Press
to turn ON the camera.
3. The Mac recognizes the camera as an external hard drive. Double click
icon for external drive to access files.
4. Copy/move files to computer or external hard drive.
IMPORTANT TIP FOR MAC USERS: When deleting files from the memory card,
empty the trash before removing the memory card or unplugging the camera.
50
playback
To VIEW VIDEOS AND PHOTOS
Videos and Photos can be viewed on a TV/HDTV or the LCD Touch BacPac
(optional accessory).
PLAYBACK ON TV/HDTV
To browse Videos and Photos:
1. Plug the camera into a TV/HDTV with a Micro HDMI or a mini-USB to a
Composite Cable (optional accessories).
2. Turn camera ON.
3. On your camera press
to cycle to
. Press
.
4. H
ERO3 displays thumbnail previews of all Videos and Photos on the
SD card. Photo sets taken in Photo Burst and Time Lapse display the
first Photo in a series.
5. While in thumbnail preview use
to view.
to cycle through thumbnails. Press
and
to navigate backward and forward to see more media
6. Use
files on your memory card.
7. Highlight desired file to view and press
.
8. D
epending on whether you are viewing Videos and Photos, different
control options will appear. Use the
and
buttons to navigate.
Note: P
hoto Burst and Time Lapse files will display the first Photo in the series.
To view all Photos in a series, use
to select VIEW and press
.
51
playback
PLAYBACK ON LCD TOUCH BACPAC
Playback using the LCD Touch BacPac follows a similar process/procedure as
described with a few slight variations.
▶See the LCD Touch BacPac User Manual for more information.
52
Battery life
CHARGING BATTERY
The battery icon displayed in the camera’s LCD will blink when the battery drops below
10%. If recording is occurring when battery reaches 0%, the camera will save the file
and power OFF.
To charge the battery:
1. Connect the camera to a
computer or USB power supply
(such as the GoPro Wall Charger
or GoPro Auto Charger).
2. The red Status Indicator Light
remains ON while the battery
is charging.
3. The red Status Indicator Light
will turn OFF when the battery is
fully charged.
The battery will charge to 80% in one hour and 100% in two hours when using
GoPro’s 1000mAh USB-compatible Wall or Auto Charger. Other chargers may
charge at only half this rate.
No damage will occur to the camera or the battery if used together prior to full charge.
Spare batteries and additional charging accessories are available at gopro.com.
53
battery life
Using the Camera While Charging
You can charge the camera’s battery while recording Video or taking Photos. Simply
plug the camera into a GoPro-specific auto, wall or phone charger to charge the
HERO3 camera while recording Video or Photos. It is best to use GoPro’s 1AMP
(1000mAh) Wall or Auto Charger for maximum charging performance while the
camera is in use. Performance of non-GoPro chargers cannot be guaranteed.
Removing the Battery From the Camera
The HERO3 battery is designed to have a tight fit to maximize reliability in highvibration activities.
To remove the battery:
1. Remove the battery door by placing your thumb in the indentation in the
battery door (on the back of the camera) and sliding it to the left.
2. Allow the door to pop out. Grasp the battery pull-tab and remove from the camera.
54
important warning messages
MicroSD Card Messages
NO SD
No card present. The camera requires a microSD, microSDHC
or microSDXC card to record Video or take Photos.
SD FULL
Card is full. Delete files or swap card.
SD ERROR
Camera unable to access card.
File Repair Icon on the LCD
If you see the File Repair icon on the LCD screen, your Video file
was corrupted during recording. Press any button and the camera
will repair the file.
Temperature Warning Icon on the LCD
The Temperature Warning icon will appear on the LCD when the
camera has become too hot and needs to cool down. Simply let it sit
and cool before attempting to use it again. Your camera will not allow
itself to overheat­­—do not worry, no damage has occurred.
55
camera assembly
ASSEMBLING THE CAMERA
The HERO3 camera housing is waterproof to 197’/60m and is constructed of polycarbonate
and stainless steel for ultimate durability. The HERO3 has a new improved latch closure
that offers one hand open-and-close functionality and locking.
To place the HERO3 camera into the housing:
1. Place camera in housing.
2. Position the backdoor into place.
3. L
ift the latch arm into upright position allowing the hinged arm to hang
downward.
4. Hook grooved portion of hinged arm to grooved top of the backdoor.
5. Use one finger to push down the latch arm to snap into place.
To remove the HERO3 camera from the housing:
1. Grip the housing with left hand.
2. Using right hand, place thumb to left side of arrow and index finger just
below latch arm.
3. Pinch fingers together, sliding arrow to the right.
4. Use fingertips to pull upward, allowing latch arm to swing to fully upright
position.
5. Lift hinged arm over the housing and remove the HERO3.
To close properly, be sure grooved sections of the latch arm and the backdoor are hooked.
56
camera assembly
The HERO3 housing comes with two types of backdoors—Skeleton and Standard.
Skeleton Backdoor
The Skeleton Backdoor (non-waterproof)
provides better sound quality by allowing
more sound to reach the camera’s
microphone. It also reduces wind noise
at speeds up to 100mph when mounted
on helmets, motorcycles, bikes and other
fast-moving vehicles. Use this backdoor
only when sand, excessive dirt/dust
and water damage is not a risk. This
backdoor is also recommended for use
inside vehicles.
PRO
TIP:
Standard Backdoor
The Standard Backdoor makes the
housing waterproof to 197’/60m.
Use this door when you need to
protect the camera from water and
other environmental hazards.
Apply RAIN-X or a similar anti-beading solution to the housing lens
to prevent waterspots from forming when using your camera in rain
or water. When RAIN-X is not available, periodically licking your
lens is a good backup solution. Trust us, this works.
57
camera assembly
Swapping housing doors
Your HERO3 camera housing comes with two types of backdoors—Standard and
Skeleton (non-waterproof).
To change backdoor:
1. Open the backdoor of the housing so that it is hanging downwards.
2. Pull downwards on the backdoor until it snaps free from the hinge.
3. Line up replacement backdoor into the hinge opening.
4. Push upwards on the backdoor until it clicks into place.
58
camera assembly
Preventing Water Damage to Your Camera
The rubber seal that lines the camera housing forms a waterproof barrier that
protects your HERO3 in wet and underwater conditions. Keep the camera housing’s
rubber seal clean; a single hair or grain of sand can cause a leak.
After every use in salt water you will need to rinse the outside of the housing
with non-salt water and dry. Not doing this can eventually cause corrosion of the
hinge pin and salt buildup in the seal, which can cause failure.
To clean the seal, rinse in fresh water and shake dry (drying with a cloth may
cause lint to compromise the seal). Re-install the seal into the grooves in the
backdoor of the housing.
WARNING: Failure to follow these steps each time you use your HERO3 can
result in leaks that may damage or destroy your camera. Your warranty does not
cover water damage resulting from user error.
59
camera assembly
Attaching your camera to Mounts
To attach your HERO3 camera to a mount, you will need an attachment buckle,
thumb screw or hardware depending on the mount you are using. For more
information on mounts, visit gopro.com/support.
Attachment
Buckle
Thumb Screw
Waterhousing
Complete Unit
Using Curved or Flat Adhesive Mounts
The curved and flat adhesive mounts make it easy to attach the camera to curved
and flat surfaces of helmets, vehicles and gear. With the attachment buckle the
assembled camera housing can be clicked ON/OFF the secured adhesive mounts.
Flat Adhesive Mount
60
Curved Adhesive Mount
camera assembly
ATTACHING ADHESIVE MOUNTS
Apply to clean surface only. Wax, oil, dirt or other debris will
reduce adhesion, which can result in a weak bond and risk of
losing camera should connection fail.
PRO
TIPS:
Attach mount in room temperature conditions. Mount’s
adhesive will not bond properly if applied in cold or damp
environments to cold or damp surfaces, or if the surface is not
room temperature.
Adhesive mounts should only be mounted to smooth surfaces;
porous or textured surfaces will not enable a proper bond.
When applying mount, firmly press into place and ensure full
contact over entire surface.
For best results, attach the mount a minimum of 24 hours
prior to use.
▶See gopro.com/support for more information on mounts.
Locking Plug
Using the HERO3 in high impact sports such as surfing or skiing
where significant impact may occur? Use the special locking
plug which securely locks the attachment buckle fingers into
place--helping prevent accidental housing release from the mount.
The circular ring fits over the thumbscrew and acts as a leash to
prevent dropping or losing the locking plug.
61
customer support
GoPro is dedicated to providing the best possible
service. To reach the GoPro Customer Support Team,
visit gopro.com/support.
62