advertisement
Using
FleetBroadband
LaunchPad
on the JUE-250 and JUE-500
Version 2.0
17 June 2009
inmarsat.com/fleetbroadband
Whilst the information has been prepared by Inmarsat in good faith, and all reasonable efforts have been made to ensure its accuracy, Inmarsat makes no warranty or representation as to the accuracy, completeness or fitness for purpose or use of the information. Inmarsat shall not be liable for any loss or damage of any kind, including indirect or consequential loss, arising from use of the information and all warranties and conditions, whether express or implied by statute, common law or otherwise, are hereby excluded to the extent permitted by English law. INMARSAT is a trademark of the International Mobile
Satellite Organisation, Inmarsat LOGO is a trademark of Inmarsat (IP) Company Limited. Both trademarks are licensed to Inmarsat Global Limited. © Inmarsat Global Limited 2008. All rights reserved.
Welcome…
.
to FleetBroadband LaunchPad
Contents
Introduction
1 Introducing FleetBroadband LaunchPad
About FleetBroadband LaunchPad
Data connections
3 Opening and closing data connections
Opening a standard IP data connection
Opening a streaming IP data connection
Setting the standard IP data connection to open automatically
Setting the default connection
Activating/deactivating TCP Accelerator
Viewing data connection details
Changing the icon order, hiding an connection or deleting a connection
Text messaging
6 Sending and receiving text messages
Writing and sending a text message
Receiving and replying to or forwarding a message
Setting up service centre options
Setting default message options
5
1
13
Managing contacts
8 Adding, editing or deleting contacts
9 Exporting and importing contacts
Managing the terminal connections
10 Changing the terminal and interface
Changing the terminal and interface
Changing the interface connection details
Changing the SIM PIN and Facility Password
Updating software
13 Checking for software updates
Support services
16 Viewing diagnostics and log file information
17 Accessing service provider support
Using Tools
Advanced features
18 Creating a dedicated IP data connection
Opening a dedicated streaming IP data connection
Troubleshooting
20 Can’t open a data connection?
21 Slow throughput on data connection?
34
36
31
41
22
18
29
Introduction
1 Introducing FleetBroadband LaunchPad
1.1
Purpose of this manual
This document describes the main functions of FleetBroadband LaunchPad on the JUE-250 and
JUE-500 terminals, and explains how to use each of the available menu options.
It is intended for first time end-users, Distribution Partners, Service Providers and anyone who wants to use a FleetBroadband terminal to connect to the FleetBroadband network and manage network services using LaunchPad. A previous knowledge of satellite communications is useful, but not essential.
1.2
Scope
This document gives detailed instructions on every function or menu option available in LaunchPad.
It does not describe how to use specific applications over the FleetBroadband network. For this information refer to the FleetBroadband solutions guides, available for download from
www.inmarsat.com/support
1.3
Assumptions
• You have installed your FleetBroadband terminal, and are registered with the network.
• You have a connection already setup between the terminal and your computer.
1.4
Useful references
• Other documentation on FleetBroadband and LaunchPad is available for download from the
FleetBroadband web site at www.inmarsat.com/support
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 1
This section explains some of the options available to you through LaunchPad, and how to open
LaunchPad.
2.1
About FleetBroadband LaunchPad
FleetBroadband LaunchPad is free software that enables you to manage the FleetBroadband terminal from any connected computer. Using LaunchPad, you can:
• Open and close data connections using a simple point and click interface.
• Turn on TCP Accelerator, which improves the performance of TCP applications over
FleetBroadband.
• Send and receive text messages (SMS).
• Manage your contacts list.
• Check for and download software updates.
• Monitor usage of phone services, access diagnostic reports and log files, and view service provider support information.
• Perform management functions such as setting up new data connections and managing the interface between LaunchPad and the terminal.
Note: Some FleetBroadband terminals give you information on usage of data services, and on call history. The JU-250 and JUE-500 do not provide this information, therefore Usage shows only telephony usage, and Call Log does not show any information.
2.2
Getting started
After your terminal has registered with the network, do the following: a. Open LaunchPad by double-clicking on the desktop icon:
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 2
The following screen displays as LaunchPad searches for the terminal: b . If this is the first time you have connected to the terminal, the following screen displays:
Note: If you subsequently connect from LaunchPad to the same terminal over the same interface, you do not have to complete this screen. d. When FB LaunchPad finds the terminal, the followin g screen displays:
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 3
2.3
Menu options
The following ta ble shows the available menu options, and where in this guide to look for information on the options.
Menu > Sub menu
File > LaunchPad network activity log
“
Refer to
Viewing log file information ” on page 32.
File > LaunchPad error reporting log
“ Viewing log file information ” on page 32.
File > Terminal log “ Viewing log file information ” on page 32.
Terminal > Current PC/Terminal
Interface
“ Changing the terminal and interface ” on page 22.
Terminal > IP Configuration
Terminal > Automatic
Connection Mode
Terminal > Change PINs
Terminal > Require PINs
“
“
“
Defining DNS settings ” on page 40
“Error! Reference source not found.” on page Error!
Bookmark not defined..
Changing the SIM PIN and Facility Password
Enabling a PIN
” on page 27
LaunchPad Services > TCP
Accelerator
LaunchPad Services > Text
Settings
“
“ Using TCP Accelerator
Configuring text options
” on page 8.
” on page 16.
LaunchPad Services > Close all data connections
“ Closing an IP data connection ” on page 8.
LaunchPad Services > Data
Connection Options
LaunchPad Services > APN
Options
LaunchPad Services >
Automatic Connection
Updates > Check for updates
Updates > Versions and
Availability
Help > Diagnostic Report “
“
“ Monitoring data connections ” on page 10.
“ Creating a dedicated IP data connection ” on page 36.
“ Setting up APN options
“ Can’t open a data connection?
” on page 41.
“ Setting the standard IP data connection to open automatically
“ Checking for software updates ” on page 29.
Updating software ” on page 30.
Viewing diagnostics ” on page 32.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 4
Data connections
3 Opening and closing data connections
This section explains how to use LaunchPad to open and close an IP data connection. It also explains how to use streaming IP connections.
3.1
Opening a standard IP data connection
The standard IP data connection is the connection that is best suited to most of your basic data requirements, for example web browsing, and sending and receiving emails. Standard IP is charged by the amount of data sent and received, and is a best effort connection, which means that the quality of service and priority given to data is not guaranteed, and is dependent on the current network traffic load. Note that the standard connection is shared between all users connected to the terminal.
By default, LaunchPad does not automatically open a standard IP data connection. Therefore, you must manually open a connection before you can use data services. To do this: e. Click on the Connect icon in LaunchPad: f. You are now ready to open a web browser, check and send emails and perform other basic data functions.
3.2
Opening a streaming IP data connection
Streaming IP data connections are optimised for use with time-critical applications such as audio and video. There are a number of pre-configured streaming IP data connections supplied with
LaunchPad, which you can open as an alternative to the standard IP data connection.
A message displays informing you that LaunchPad is opening a data connection, then the following screen displays:
Note that the Connect icon has changed to Disconnect, and the Status message reads
“Standard Data connection open. Ready for Phone, Text and Data.”
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 5
Streaming connections are available at one of the following guaranteed data rates:
• 32 kbps (shown as Connect 32 Streaming in LaunchPad).
• 64 kbps (shown as Connect 64 Streaming)
• 128 kbps (shown as Connect 128 Streaming).
• 256 kbps (shown as Connect 256 Streaming) – JUE-500 only.
To open a streaming connection: g. Click on the symbol next to the Connect icon:
The Connection control window opens, as shown below: h. Simply click on the required streaming IP data connection to close the standard IP data connection, and open your chosen streaming IP data connection. A message displays, informing you that the connection will be charged by time rather than volume. Click on OK.
Note: The streaming IP data connections are normally charged by the length of time they are open rather than the amount of data transferred. Therefore only use this connection type when needed for audio or video data transfer.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 6
About dedicated streaming IP data connections
Note that a pre-configured streaming IP data connection is shared between all terminal users. To maximise the performance of your audio and video applications, Inmarsat recommends that you configure your own streaming IP data connections, each one dedicated to a specific application.
You can open these dedicated connections in addition to the standard IP data connection.
Refer to “ Creating a dedicated IP data connection
3.3
Setting the standard IP data connection to open automatically
You can configure LaunchPad to automatically open a data connection each time you make a connection with the terminal. To do this: a. From the LaunchPad main menu, select LaunchPad Services > Automatic Connection. The
LaunchPad automatic connection dialog box displays: b. Check the Automatically open a standard Data connection after network registration check box to enable automatic connection (or uncheck the check box to enable automatic connection). c. Click on OK to save the settings, or Cancel to exit without saving.
The next time you open LaunchPad, the standard IP connection opens automatically, without you needing to click on Connect.
Note: There may be a minimum charge when an IP data connection is open, and data may be transferred across the connection even if you are not actively using an application (for example, your computer may be receiving automatic updates). If you do not want to incur these charges, Inmarsat recommends that you do not switch on automatic connection using
LaunchPad, or that you close the data connection when you are not using it.
3.4
Setting the default connection
By default, the standard IP data connection opens when you request data services. If you want to select one of the other data connections to open by default, do the following: a. In the Connection control window, right-click on the icon that you want to select as the default connection:
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 7
b. Select default from the sub-menu. The selected connection will now open by default when you select data services.
If you want to check which connection is the default, right-click on each connection in turn. The default connection has the sub-menu option default greyed out.
3.5
Closing an IP data connection
To close an individual connection, click on the symbol next to the Disconnect icon, and then click on the individual data icon that you want to close.
There are a number of ways to close all open IP data connections. The simplest is to click on the
Disconnect icon on the launch bar.
4 Using TCP Accelerator
4.1
About TCP Accelerator
TCP Accelerator (also known as TCP PEP) enhances the performance of TCP over a satellite network such as the FleetBroadband network by providing:
• Fast start - useful for transferring small amounts of data, since traditional TCP is often slow with smaller data transfers.
• Increased window size - improves TCP performance in larger bandwidth applications.
• Delay based congestion control - ensures high transfer rates and less delay.
The TCP accelerator will enhance the performance of FleetBroadband when your computer is sending data from TCP applications ONLY. Typical TCP applications include:
• Email.
• Webmail.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 8
• VPN with Checkpoint, Nortel, Cisco and Netscreen. Other VPN applications may work but they have not been tested by Inmarsat.
TCP Accelerator will not enhance performance when you are using any streaming based application including video streaming and audio streaming, because these are UDP based applications.
4.2
Installing TCP Accelerator
TCP Accelerator is free software that is supplied on your product CD, and can also be downloaded using the Update option in LaunchPad, or downloaded from the Inmarsat web site at
www.inmarsat.com/support
Follow the on-screen instructions to install TCP Accelerator.
4.3
Activating/deactivating TCP Accelerator
You can use FleetBroadband LaunchPad to deactivate the TCP Accelerator (or activate it again).
After initial installation, TCP Accelerator is switched on. You can only switch TCP Accelerator off after the terminal is registered with the network. After you have registered: a. Select LaunchPad Services > TCP Accelerator from the LaunchPad main menu. The following screen displays: b. Select OFF from the drop down list to disable TCP Accelerator, then click Apply. The following screen will display if the settings have been successfully changed.
To turn TCP Accelerator on, repeat step a., and set the TCP PEP State to ON.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 9
5 Monitoring data connections
5.1
Viewing data connection details
You can view information on currently open data connections from the Data Connections tab. To do this: a. Click on the symbol next to the Connect icon:
The following screen displays: b. Click on View Connection details of terminal. Details of the currently open connections display beneath the connection icons, as shown below:
The displayed details include the Name of the connection, the Owner, the connection Service type, the APN, the IP address, the length of time the connection has been open and the data sent and received. c. To disconnect a data connection, click on Disconnect.
To return to viewing the data connection icons only, click on Back to icon view.
To refresh the displayed information, click on Update connection list.
To access the management functions for data connections, click on Advanced.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 10
5.2
Changing the icon order, hiding an connection or deleting a connection
The available data connections display in the Connection control window. You can change the sequence in which the icons display, remove a connection from the display, or delete a connection.
To make any of these changes: a. Click on the symbol next to the Connect icon:
The Connection control screen displays: b. Click on Advanced. The ConnectionsTab screen displays, as shown below: c. Do any of the following
• To move an icon so that it displays in a different position in the connection control window, select the icon you want to move, and use the Move left and Move right buttons to move the icon to its new position in the sequence.
Note: If you want to move an icon more then one place to the right or left, you must select the icon each time before using the arrow keys.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 11
• To remove an icon from the display list without deleting it, select the icon and click on Hide.
The icon appears greyed out in the Connections Tab Screen, and does not display at all in the Connection Control window.
• To delete an icon, select the icon and select Remove. Click on Yes to confirm the deletion.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 12
Text messaging
6 Sending and receiving text messages
You can use LaunchPad to write and send text messages, and receive and reply to text messages.
You can send text messages from a FleetBroadband terminal to another FleetBroadband terminal and from a FleetBroadband terminal to a mobile phone. You can also send a text messages from a mobile phone to a FleetBroadband terminal, but only on those networks with which Inmarsat has an agreement.
Note: You do not have to have a data connection open to use text messaging.
6.1
Writing and sending a text message
To write and send a text message: a. Click on the Text icon on the launch bar: b. The following screen displays:
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 13
In the Compose new message panel, complete the To field with the contact number of the recipient. You can do this either:
• By typing in the number in full, or
• By clicking on the symbol to display your list of contacts. Then select the recipient from the list. c. Write the message in the text area below the To field. d. Click Send to send the message.
Alternatively, you can click on Save to save the message in the draft folder to send later, or click on New to start again.
6.2
Receiving and replying to or forwarding a message
To check for new text messages: a. Click on the Text icon on the launch bar:
The following screen displays: b. In the Inbox, double click on the text message you want to read. New messages display in Bold.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 14
c. You can do any of the following:
• To reply to the message, click on Reply. The sender’s name displays in the To field of the
Compose new message panel. Write the text of your reply below, and click on Send.
• To forward the message, click on Forward. The text of the message displays in the Compose new message panel. Select the recipient(s) of the message in the To field, and click on Send.
• To delete the message, click on Delete.
• To add the contact to your contacts list, click on Add Contact.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 15
7 Configuring text options
You can configure the settings of the Text feature. To do this, in the LaunchPad main menu click on
LaunchPad services > Text Settings (or click on Advanced in the Text window). The Configure
Text screen displays:
You can do the following from this window:
• Set up the Service Centres – the service centre is stored on your SIM and is used to forward your outgoing text messages. If you are unable to send text messages, check the service centre.
• Set up the Default Message Options – these include the Validity and Class of the message.
7.1
Setting up service centre options
The service centre is the network device that distributes text messages. You can select the number of the currently active device in the Current service centre drop-down list, and can set up the available devices using the Manage service centre address button.
To select the currently active service centre: a. Click on the Current service centre drop-down list. b. Click on the required service centre.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 16
a. Click on Manage service centre address. The Service Centre Address dialog box displays, as shown below: b. Click on one of the following, as required. operator name, and click on Add.
• Select an address from the list and click on Edit to edit a service centre address. Click on
Change to save the new address.
• Select an address from the list and click on Delete to delete an address. You will be prompted to confirm the deletion.
7.2
Setting default message options
The default message options enable you to manage how your Text messages are displayed and stored.
To set the default message options: a. Select a message validity period from the Validity drop down box. If the Text message has not been delivered within the set time, the message is deleted. The available options are: 1 hour, 6 hours, 1 day, 1 week, or maximum. b. Select a message class from the Class drop-down box. This controls how the message is displayed. The available options are: No class, On recipient phone screen, In recipient phone memory, In recipient SIM memory, or Use default mode. c. Check any or all of the following check boxes, as required:
• Use same centre for reply – check this box to ensure that the service centre displayed in the
Current service centre drop-down list is used for the reply to a message.
• Request status report – check this box to display a status report when the Text message is delivered.
• Send unicode message – check this box to enable the use of unicode characters in a message.
• Add signature – check the Add Signature option if you want to add a signature to your Text messages. Type the text of the signature in the Specify signature text box.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 17
Managing contacts
8 Adding, editing or deleting contacts
The Contacts window enables you to manage your list of contacts. You can add a new contact, or edit or delete an existing contact.
To open the Contacts window, click on the Contacts icon:
The following screen displays:
8.1
Adding a contact
To add a contact to an address book:
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 18
a. Click on New in the Contacts window. The following screen displays: b. Enter the Name and the contact Number, and click on Save.
8.2
Editing a contact
To edit an existing contact: a. Select the contact to be edited and click on Edit. b. Edit the Name and/or Number of the contact as required, and click on Save.
8.3
Deleting a contact
To delete an existing contact, simply select the contact and click on Delete. You are prompted to confirm the deletion.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 19
9 Exporting and importing contacts
This section explains how to export a contact to a file on your computer. You can also import an address book from a file on your computer.
9.1
Exporting a Contact
You can export a contact or contacts to a file on your computer. To do this: a. Select the contact to be exported and click on Export. The Choose Export Type dialog box displays, as shown below: b. Check the File check box to export the contact to a file on your computer, then click on
Continue. The Open dialog box displays. c. Navigate through your computer’s file structure using this window, and click Open to save the contact details.
The file is saved as an Excel document, in the following format.
Note that if you want to import a current contact list into LaunchPad, you must store the contact names and details in this format and import them as described in “ Importing a Contact
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 20
9.2
Importing a Contact
You can import a contact into an address book from a file on your computer. For details on the format of the file to be imported, refer to “ Exporting a Contact
To import a contact or list of contacts,: a. Click on Import. The Open dialog box displays. b. Navigate through your computer’s file structure using this window, and click Open to select the contact details you want to import. The Select Address Book dialog box displays, as shown below: c. Click on OK to import.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 21
Managing the terminal connections
10 Changing the terminal and interface
You can display the current terminal and interface details from FleetBroadband LaunchPad, and do the following:
• Change the terminal and interface.
• Change the interface connection details, for example the IP address.
10.1
Changing the terminal and interface
To change the terminal and Interface details: a. From the FB LaunchPad main menu, select Terminal > Current PC/Terminal Interface. The
Current PC-Terminal Interface dialog box displays, as shown below:
The current terminal and interface details are displayed. b. If you want to connect to a different terminal and interface, choose the required terminal and interface from the drop-down list, and click on Search. FB LaunchPad searches for the required terminal and interface, and, if found, connects your computer.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 22
10.2
Changing the interface connection details
To manually change the interface connection details: a. From the FB LaunchPad main menu, select Terminal > Current PC/Terminal Interface. The
Current PC/Terminal Interface dialog box displays, as shown below:
The current terminal and interface details are displayed. b. Click on Connect manually. The Manual Connection dialog box displays, as shown below. c. Enter the required IP address and port number in the Enter IP address and Port Address text boxes, d. Click OK to save the displayed information, or click Cancel to exit without saving.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 23
11 Setting up APN options
An Access Point Name (APN) identifies the external network that is accessible from a terminal. By default, the SIM card in your terminal is configured with the APN of your Service Provider, and the terminal reads this information from the SIM card. The APN of each data connection must be the same as the default APN, otherwise you cannot open the data connection. To check that the default
APN and the APN assigned to a particular data connection are the same, do the following: a. In the LaunchPad menu, select LaunchPad services, then from the drop down menu select
APN options. The following screen displays:
This screen shows the default APN in the Select APN drop-down list. The default APN is the
APN stored on the SIM card. Make a note of this APN, then click on Cancel.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 24
b. To check that a data connection is set to the default APN, Click on the icon next to Connect or Disconnect to open the Connection control panel. c. Make sure that the data connection you want to check is not active, then right-click on the icon of the data connection you want to check. A sub-menu displays.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 25
d. Click on edit. The data connection configuration window displays (the following is the configuration window for the standard IP data connection): e. Check the APN listed in the Select APN drop-down list. If it is not the same as the APN you noted in step a. select the correct APN. You can now open the data connection.
Note: You may have to repeat steps b to e for each data connection you want to check.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 26
12 Security
Using FB LaunchPad, you can change the SIM PIN and facility password, and enable a PIN to give a high level of management control over security.
The Security and Control options are as follows:
• Changing the SIM PIN and Facility Password.
• Enabling a PIN.
12.1
Changing the SIM PIN and Facility Password
To change the SIM PIN or the Facility Password: a. From the LaunchPad main menu, select Terminal > Change PINs. The following screen displays: b. Select either Change SIM PIN or Change Facility Password. c. Enter the Existing PIN or Password. d. Enter the New PIN or Password. e. Re-enter the new PIN or Password in the Confirm PIN/Password text area. f. Click on OK to save the changes.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 27
12.2
Enabling a PIN
Using FB LaunchPad you can enable or disable a configured PIN.
To enable a PIN: a. From Launch Pad main menu, select Terminal > Require PINs. The Require PIN dialog box displays: b. From the Select PIN drop-down list, select the facility for which you want to enable or disable the
PIN. c. Click on the Enable radio button to enable the PIN, or click on the Disable radio button to disable the PIN. Before you can disable the PIN, you must enter the current PIN in the Enable
PIN text box. d. Click on OK to save the changes and exit, or click on Cancel to exit without saving the changes.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 28
Updating software
You can use LaunchPad to check for the availability of software updates, and choose which software updates you want to install. Software updates available from FleetBroadband LaunchPad include: a. LaunchPad software. b. Terminal software. c. TCP Accelerator software.
13 Checking for software updates
You can set the types of upgrade you want FB LaunchPad to check for, and how you want to check. To do this: a. From LaunchPad main menu, select Update > Check for Updates. The Check for Updates screen displays: b. From this screen you can select the types of software you want to check for, by selecting the check box next to the software type, and then click on Check for updates now. c. Click on OK to save the settings.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 29
To update to a new version of software using LaunchPad: a. From the LaunchPad main menu select Update > Versions and Availability. The Version and
Availability of Software screen displays:
This screen shows the product type, current version, whether an update is currently available and, if it is, the available version. To update to the listed version, click on Install now alongside the update version you want to install.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 30
Support services
There are a number of LaunchPad features that can help you monitor terminal usage and performance, and provide information that may be useful if you need support.
You can view the usage of data (by byets) and telephony and ISDN (by time) by clicking on the
Usage icon on launch bar. The usage panel displays information for this terminal session, and also shows the cumulative total.
To view the data and telephony usage information a. Click on the Usage icon on the launch bar:
The following screen displays:
The Data and Telephony and ISDN usage is displayed. The Usage this session is displayed in the left panel, the Total usage since last reset is shown in the right panel. The units of measure adjust depending on the accumulated total: for example, telephony and ISDN units are first measured in seconds, then minutes and so on.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 31
Note: This information is provided for guidance information only, and may differ from that used by your Service Provider for billing purposes.
16 Viewing diagnostics and log file information
You may need to refer to LaunchPad’s diagnostics and log file information if requested by support personnel. This information is available as follows:
16.1
Viewing diagnostics
For diagnostics, click on the Help menu in LaunchPad, then click on Diagnostic report. A screen similar to the following displays:
This screen gives you the following options:
• Email the report, for example to support personnel.
• Print the report.
• Save the report in a file on your computer.
16.2
Viewing log file information
For log files, click on the File menu in LaunchPad, then click on one of:
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 32
• LaunchPad error reporting log - reports details of all command and responses exchanged between the LaunchPad and the terminal.
• LaunchPad network activity log - reports network activity-related information, such as network usage, QoS information, and unsolicited alerts reported by the network.
• LaunchPad terminal log - generated by the terminal, and can be accessed from LaunchPad.
A screen similar to the following displays (Error Reporting Log is shown as an example):
From here, you can do any of the following: from the drop-down list, then click on Display. The details display in the following format: list and click on Delete.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 33
log file from the drop-down list, click on Save, then navigate to the save location.
Print. Select a printer from the displayed print dialog box. from the drop-down list, and click on Email. Complete the email details in the email template displayed.
17 Accessing service provider support
You can access your service provider’s support information simply by clicking the Support icon on the launch bar (the support icon you see may be different, depending on your service provider).
A screen similar to the following displays, listing support information for your service provider:
If you have an Internet connection, your service provider’s web site displays in the blank screen area shown above.
Using Tools
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 34
Software tools are provided with LaunchPad to help you maximise your use of the FleetBroadband service. To access these tools, simply click on the Tools icon on the launch bar:
A screen similar to the following screen displays, depending on the available tools:
Click on the required tool to launch the application.
At the time of publication, eFax is the only tool supplied by default with LaunchPad. For details on using eFax, refer to the document “Using eFax over FleetBroadband”, available for download from the Inmarsat web site at www.inmarsat.com/support, click on FleetBroadband, then click on
User guides.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 35
Advanced features
18 Creating a dedicated IP data connection
If required, you can set up one or more dedicated streaming IP data connections for applications such as Streambox, Win Media and Quick Time Media. A dedicated IP data connection ensures that a selected application does not have to share the connection with any other traffic. In addition, you can open more than one dedicated streaming IP connection at a time, if required. The standard
IP connection or one of the pre-configured streaming IP connections must be open before you can open a dedicated streaming IP connection; this is because the dedicated streaming IP connection shares the APN and routing information of the open standard IP or streaming IP connection.
FB LaunchPad displays an information note if you are about to open a dedicated streaming IP connection.
To create a dedicated IP data connection: a. Click on LaunchPad services > Data Connection Options (or click on Advanced in the
Connection control window). The following screen displays:
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 36
b. Click on Add new connection. The following screen displays: c. Select Create new Dedicated Streaming IP Data connection, and click on OK. The following screen displays:
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 37
d. Click on the icon you want to use for this application. The icon displays in the box next to the
Icon label text box. e. Type in a name for the connection in the Icon label text box. The name and icon that you select here will display when you open the Data tab in FleetBroadband LaunchPad. f. Select the application you want to associate with this icon and icon label from the Application
Traffic Flow Template check box. The traffic flow template ensures that only traffic associated with the application can use this dedicated connection.
Note: LaunchPad supports a number of pre-configured TFTs, any one of which can be selected when you configure a dedicated streaming connection to ensure that the defined traffic has its own dedicated connection.
If you want to define your own TFT for another application, contact your Service Provider for assistance. g. Select the Desired Rate from the drop-down list. This is the Quality of Service (QoS) that you want to use for this connection. h. Select the Minimum Rate from the drop-down list. This is the minimum QoS that you will accept for this connection. Inmarsat recommends that you set the Minimum Rate to the same as the
Desired Rate, to ensure that you are allocated the data rate that you require. off by default because TCP applications have re-transmission built-in, and UDP applications do not require re-transmission.
OK to save the displayed configuration and exit the configuration screens, or click on Cancel to edit without saving.
Repeat steps d. to j. to add further dedicated IP data connections. You can configure as many dedicated IP data connections as you require.
18.1
Opening a dedicated streaming IP data connection
To open a dedicated streaming IP data connection: a. Click on the symbol next to the Connect icon:
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 38
The Connection control window opens, as shown below: b. Make sure that the standard IP data connection is open. The standard IP data connection must be open before you can open a dedicated IP data connection. c. Click on the required dedicated streaming IP data. The following screen displays: d. Click on OK.
Only the application associated with the dedicated IP data connection uses this connection. All other traffic uses the standard IP data connection.
Note: Dedicated streaming IP data connections are normally charged by the length of time they are open rather than the amount of data transferred. Therefore only use this connection type when needed for audio or video data transfer.
Note: If required, you can open more than one dedicated streaming IP data connection at the same time.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 39
19 Defining DNS settings
If your Distribution Partner or Service Provider has supplied you with DNS server settings, you can enter these into FB LaunchPad. To do this: a. From the LaunchPad main menu, select Terminal > IP Configuration. The Configure Local
LAN dialog box displays, as shown below: b. Type in a Primary Address for the DNS Server, as supplied by your Distribution Partner or
Service Provider. The DNS Server matches a Web site address (such as www.inmarsat.com) with its corresponding IP address, so that you do not have to enter an IP address to access Web data.
Note: The DNS server address for the default Inmarsat APN is 172.30.66.7. c. If required, type in a Secondary Address for another DNS Server. This gives you the option of using a backup server. d. Click Apply, then OK to save the changes, or Cancel to exit without saving.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 40
Troubleshooting
This section provides some basic troubleshooting information. For more detailed troubleshooting, refer to the Troubleshooting solutions guide, available for download from
www.inmarsat.com/support
20 Can’t open a data connection?
If you can’t open a data connection, check the Access Point Name (APN) settings. An Access Point
Name (APN) identifies the external network that is accessible from a terminal. By default, the SIM card in your terminal is configured with the APN of your Service Provider, and the terminal reads this information from the SIM card. The data connection must be set to the same APN as the SIM card. To check this: e. In the LaunchPad menu, select LaunchPad services, then from the drop down menu select
APN options. The following screen displays:
This screen shows the APN stored on the SIM in the Select APN drop-down list. Make a note of this APN, then click on Cancel.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 41
f. Click on the icon next to Connect or Disconnect to open the Connection control panel.
Make sure that the data connection you want to check is not active, then right-click on the icon of the data connection you are trying to open. A sub-menu displays. g. Click on edit. The data connection configuration window displays (the following is the configuration window for the standard IP data connection): h. Check the APN listed in the Select APN drop-down list. If it is not the same as the APN you noted in step a. select the correct APN and try to open the data connection.
Note: You may have to repeat steps b to e for each data connection you want to open.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 42
21 Slow throughput on data connection?
If your data connection is running slower than expected, try using TCP Accelerator. TCP
Accelerator is a free software download that enhances the performance of TCP over the
FleetBroadband network by ensuring high transfer rates and less delay. Either install TCP
Accelerator from CD supplied with your terminal, or download it from the Inmarsat Web site at
www.inmarsat.com/support
Once you have downloaded TCP Accelerator, make sure it is switched on in FB LaunchPad. To do this, select LaunchPad services from the LaunchPad main menu, then select TCP Accelerator.
Make sure that the TCP PEP state drop-down list is set to ON.
Note: TCP Accelerator currently works in the send direction only.
Using FleetBroadband LaunchPad on the JUE-250 and JUE-500 Page 43
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement