Real-Fyre 24 CHRRSO-24, 30 CHRRSO-30, 18/20 CHRRSO-18/20 Charred Rugged Split Oak Log Placement Instructions

Charred Rugged Split Oak Log Placement Instructions (18/20" model)
CHRRSO-18/20
PARTS LIST
6
CHRRSOL-13T
5
7
CHRRSOL-8T
4
1
2
CAUTION: Burn hazard! Logs will remain hot
for some time after use.
CHRRSOL-11T
This charred log set includes an ember screen
and glowing embers. For G4 & G45 Series Burner
Systems; refer to the main owner’s manual for screen
and embers installation. For G46 & “P” Series Burner
Systems; DISCARD the screen and embers as they are
not applicable.
CHRRSOL-12T
CHRRSOL-15BR
I
CHRRSOL-18BFL
3
1
CHRRSOL-18BFR
200948
EM-1
III
II
4
5
3
2
Final Log Placement
IV
REV 1 - 1201241306
6
7
1
L-A2-317
Charred Rugged Split Oak Log Placement Instructions (24" model)
This charred log set includes an ember screen and glowing embers. For G4 & G45 Series Burner Systems; refer to
the main owner’s manual for screen and embers installation. For G46 & “P” Series Burner Systems; DISCARD the
screen and embers as they are not applicable.
CHRRSO-24
CAUTION: Burn hazard! Logs will remain hot
for some time after use.
PARTS LIST
7
8
CHRRSOL-10T
5
6
CHRRSOL-13T
CHRRSOL-8T
CHRRSOL-14T
4
CHRRSOL-12T
I
1
CHRRSOL-20BR
1
2
CHRRSOL-24BFL
3
CHRRSOL-24BFR
203329
EM-1
III
II
5
4
2
3
IV
V
Final Log Placement
7
6
8
REV 1 - 1201241306
2
L-A2-317
Charred Rugged Split Oak Log Placement Instructions (30" model)
This charred log set includes an ember screen and glowing embers. For G4 & G45 Series Burner Systems; refer to
the main owner’s manual for screen and embers installation. For G46 & “P” Series Burner Systems; DISCARD the
screen and embers as they are not applicable.
CHRRSO-30
CAUTION: Burn hazard! Logs will remain hot
for some time after use.
PARTS LIST
CHRRSOL-10T
7
6
CHRRSOL-8T
8
CHRRSOL-13T
5
4
CHRRSOL-14T
CHRRSOL-15T
2
1
I
CHRRSOL-24BR
1
CHRRSOL-30BFL
3
CHRRSOL-30BFR
203329
EM-1
III
II
4
5
2
IV
3
V
7
6
Final Log Placement
8
REV
EV 1 - 1201241306
3
L-A2-317
L
A2 317
LOG SET IMPORTANT INFORMATION
This instruction contains suggested log placement for your Real-Fyre log set. The suggested log placement
will allow for superior flame pattern, appearance, and adequate ventilation. Adequate ventilation is
absolutely necessary! Provided significant, noticeable sooting does not occur, some flexibility is possible
in log placement to suit your individual preference (see Important below). If you experience a continued
accumulation of carbon (soot) on your logs, move the effected log(s) so as to minimize the flame contact
on the effected log(s). Please read these instructions completely and carefully.
Important:
WARNING: Use ONLY burners and other parts
specifically approved for use with this
Real-Fyre gas log set. Failure to do
so may result in property damage or
personal injury, and will void listings,
certifications, and negate claims made
to RHP. Contact your local Real-Fyre
dealer if you need more information.
Adequate ventilation is absolutely
necessary. Although there is some
flexibility with the log placement,
adequate spacing between the
logs is NECESSARY and MUST be
maintained. Some carbon build up
(sooting) may occur where the flames
strike the logs. If the carbon build up
(sooting) continues, rearrange the
top logs to allow more opening(s) for
the flame(s) before sooting becomes
worse. If any sooting occurs outside
of the firebox (i.e. on the walls), turn
off the unit immediately and contact
a qualified professional service
technician.
CAUTION: Burn hazard! Logs will remain hot
for some time after use. If you need to
reposition any log to maintain the proper
layout, use heat resistant gloves or allow
logs adequate time to cool before handling.
For warranty information refer to the warranty that
came with your vented burner system. This product
is only warranted when used as part of a Robert
H. Peterson Co. vented burner system.
ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746
4