Sensaphone FGD0013 Water Sensor

Sensaphone FGD0013 Water Sensor
SENSAPHONE
Monitoring Sensor
General Accessories
Spot Water Detector
Description
The water detection sensor can be used
with all Sensaphone models to detect
the presence of water on a horizontal
surface. Independently powered by
internal lithium batteries. The batteries
should last for approximately 3-5
years. When the batteries start to run
down, the sensor will automatically
cause an alarm dial out when no water
is present. Multiple sensors can be
wired in series to a single input.
Package Contents
(1) Spot Water Detector
(1) Installation Instructions
(1) 8’ Wire
Specifications
Normality:
Normally closed
Housing:
Black Plastic
Number per input:
Multiple, wired in series
Compatibility:
All Sensaphone models
Dimensions:
2 1⁄4” x 1 1⁄8” x 3 5⁄8”
*Specifications subject to change without notice
Spot Water Detector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FGD-0013
Sensaphone • 901 Tryens Road • Aston, PA 19014 • 877-373–2700 • www.sensaphone.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement