EZ SureCall EZ 4G 4G Voice and Data Home Cellular Signal Booster

EZ SureCall EZ 4G 4G Voice and Data Home Cellular Signal Booster
Voice and Data Home Cellular Signal Booster
SureCall EZ 4G
Voice and Data Home Cellular Signal Booster
The EZ 4G is an ideal solution for homes where reception is weak due to distance from
cell towers, topography or building materials. This plug and play solution can be
installed in minutes, no outdoor antenna required. It’s 5-band solution, providing PCS,
Cellular, LTE and 4G AWS frequencies for use with all major U.S. carriers. You can rest
assured that you’ve made the right choice with our three-year warranty.
Unique Features
• First wide-band signal booster that doesn't require an outdoor antenna
• All carrier frequencies are independently controlled
• All-in-one, low cost solution
• Offers the industry’s best three-year warranty
• Built in safeguard completely eliminates interference to cell tower
• FCC approved for use with all major U.S. carriers
• Simple, Plug and Play operation
The SureCall EZ 4G kit with desktop antennas
Key Features:
Five Embedded CPU for smarter technology
Booster Kit Includes:
Stealth technology incorporated – uplink becomes
dormant when not in use, providing green, power
saving operation
The standard EZ 4G Kit (SC-PolyEZH-72-DT-Kit) includes: the EZ booster with built-in
antenna, SureCall's low dB loss SC-240 coax cable and an indoor desktop antenna
FCC certified for new regulations and technical
Additional kits
(SC-PolyEZH-72-P-Kit) includes: the EZ booster with built-in antenna, SC240 cable
and indoor panel antenna
Auto Gain Control (AGC) and pre-warning
Automatic shut down
Independently reconfigurable for each band
Supports all 2G and 3G voice and 4G data standards
Quality metal construction, durable and resilient
Lowest Out of Band Emissions (OOBE)to date
Patent # US 8,867,572 B1
EZ 4G | 04-29-15 v1.1
SureCall | 48346 Milmont Drive, Fremont CA 94538 | 1-888-365-6283 | [email protected]
》See page 2 for specifications and installation diagram
Voice and Data Home Cellular Signal Booster
Model No.
Uplink Frequency Range (MHz):
698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 ( G-Block Included )
Downlink Frequency Range (MHz):
728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 ( G-Block Included )
Supported Standards:
CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards
Input/Output Impedance:
50 ohm
Maximum Gain:
Cellular - 65dB / PCS - 72dB / LTE(A) - 63.5dB / LTE(V) - 64dB / AWS - 71dB
Noise Figure:
AC Power Transmitter:
Input AC 110-240V, 50/60 Hz
Maximum Output Power:
1Watt EIRP
SC-240-50NN (50 feet)
RF Connectors:
N male on both ends
Power Consumption:
10-3/4” X 11-1/4” X 3-1/4”
4 lbs 8 oz
Specifications are subject to change. Specifications contained within apply only to products meeting the latest FCC Certification Guidelines of 2/20/2013.
Installation Example
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider and have your provider’s consent. Most wireless providers consent to the use of signal boosters. Some providers
may not consent to the use of this device on their network. If you are unsure, contact your provider.You MUST operate this device with approved antennas and cables as specified by the manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.You MUST cease operating this device immediately if requested by the FCC or a licensed wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls served by using this device.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF