A L A R M C A R B O N CO5120BN

A L A R M C A R B O N CO5120BN
CARBON
MONOXIDE
ALARM
CAT.
CO5120BN
CO
ELECTROCHEMICAL
CO SENSOR
Most accurate technology available for
detecting carbon monoxide as compared to
other sensing technologies.
LATCHING ALARM
INDICATOR
Remembers which unit initiated an alarm.
INTELLIGENT SENSING
TECHNOLOGY
Microprocessor controlled to reduce
the number nuisance alarms.
END OF LIFE SIGNAL
Provides audible notice when alarm
needs to be replaced.
TWO LOCKING
FEATURES
Pins lock battery drawer and/or alarm to
base. Perfect for apartment, dormitory or
hotel applications.
7
120V AC, 60Hz Wire-in
with 9V Battery Backup
Description:
The BRK Brands, Inc. Cat. No CO5120BN is a wire-in, 120 VAC 60Hz single and /
or multiple station carbon monoxide alarm specifically designed for residential
and institutional applications including sleeping rooms of hospitals, hotels,
motels, dormitories and other multi-family dwellings as defined in standard NFPA
101. Model CO5120BN complies with UL2034, NFPA 720, HUD, FHA and other
agencies that model their codes after the above agencies. They meet building
codes where AC/DC carbon monoxide alarms are required either separately or in
combination. The alarms are interconnectable up to 18 devices, of which 12 can
be smoke alarms.
The BRK CO5120BN features an electrochemical carbon monoxide sensor, an
85dB horn, 9V battery back-up, an End of Life and a silence feature. “Intelligent
Sensing Technology” is designed to reduce nuisance alarms. “Latching Alarm
Indicator” remembers which unit initiated an alarm. When interconnected in a
series, the unit that triggered the alarm will store in memory or “latch” the
information and begin to flash the LED indicator 2 seconds on, 2 seconds off. A
single button test/silence button eliminates confusion. Battery installation and
removal can occur while the unit is mounted to the ceiling or wall via the side
load battery compartment. Other Contractor Preferred features include a dust
cover to keep alarm clean during construction, keyhole slots in the mounting
bracket eliminate the need to remove the electrical box screws for installation.
Two locking features are provided to prevent battery theft and/or theft of the unit.
Connection toAC power is made with a“Quick-Connect” wiring harness.
Installation is quick, easy and cost
effective.
CAT.
CO5120BN
TECHNICAL SPECS
CO
TOP VIEW
SIDE VIEW
MOUNTING
BRACKET
5.4"
1.9"
Alarm Dimensions:
Weight:
Operating Voltage:
Operating Current:
Temperature Range:
Humidity Range:
Audio Alarm:
Test/Silence:
5.4” dia x 1.9”H
6.4 oz
120V AC 60Hz w/ 9V battery backup
.09 amps (standby/alarm)
40°F (4°C) to 100°F (38°C)
10% to 95% relative humidity (RH)
85dB at 10 feet
Electronically simulates carbon
monoxide condition, causing the unit to alarm
Press and hold test/silence button
Alarm Reset:
Automatic when CO clears
Interconnections:
Up to 18 units of First Alert or BRK Smoke, CO and
Heat Alarms. Maximum of 12 smoke alarms. See
user’s manual for details.
Electrochemical
ARCHITECTURAL AND ENGINEERING SPEC
The carbon monoxide alarm shall be a BRK Model CO5120BN and shall provide at a
minimum the following features and functions:
1. An electrochemical CO sensor.
2. Powered by 120V AC, 60Hz and have a monitored 9V battery backup and a solid
state piezo horn rated at 85dB at 10 ft. and shall be capable of self restoring.
3. The unit shall perform self diagnostic tests and issue a malfunction warning
audibly (three chirps) if the unit malfunctions.
4. The unit shall have an "End of Life" signal. This signal should be capable of
temporarily being silenced for up to 2 days. After about 2 days, the signal will
resume. After about 2-3 weeks the signal cannot be silenced.
5. A visual LED power-on indicator to confirm unit is receiving power or to confirm
unit has switched to battery backup mode.
6. The CO sensor is adjusted not to detect CO levels below 30 PPM and will not
alarm when exposed to constant levels of 30 PPM for 30 days. It will alarm
at the following levels: 400 PPM CO between 4 and 15 minutes, 150 PPM CO
between 10 and 50 minutes and 70 PPM CO between 60 and 240 minutes.
7. A test/silence button to check all alarm functions and to silence any nuisance
alarms. In addition, the unit shall have a low battery silence feature to quiet the
low battery chirp for up to eight hours.
8. A “Smart Interconnect” feature allows the unit to be interconnected to BRK
smoke alarms. During a smoke event, the CO5120BN horn pattern shall emit
the smoke alarm horn pattern (3 beeps, pause, 3 beeps pause). During a CO event,
the interconnected CO alarms sound their normal horn pattern.
9. The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and
relative humidity between 10% and 95%.
10. The unit shall at a minimum meet the requirements of UL2034, NFPA 720 and ICC.
INSTALLATION OF ALARM
1
3
2
2
3
6
4
7
1.
2.
3.
4.
5.
6.
7.
8.
9.
5
Mounting bracket
Mounting Slots
Locking Pins
Hot (Black) AC Wire
Nuetral (White) AC Wire
Interconnect (Orange) Wire
Battery Drawer Latch
Battery Drawer - Install
9V battery here
Quick-Connect Plug
9
1.
2.
3.
4.
Listed to UL2034 Standard
SHIPPING SPECS:
Individual Carton Dimensions
Weight
Cube
UPC
5.54"L x 2.10"W x 5.72"H
0.61 lbs.
0.038 ft3
0 29054 85617 3
Master Carton Dimensions
Master Pack
Weight
Cube:
I2of5:
13.13"L x 5.81"W x 12.13"H
12
9.2 lbs.
0.54 ft3
300 29054 85617 4
Pallet Information
Cases per Layer
Number of Layers:
Cases per Pallet:
Units per pallet:
Cube:
Weight:
25
3
75
900
47.3 ft3
758 lbs.
678
BATTERY DRAWER LOCK
Remove Pin
54 3
A
8
Listing:
}
B
}
Installation of this carbon monoxide alarm must conform to all
local electrical codes and Article 760 of the National Electrical
Code (NFPA 70) and NFPA 720. Interconnected units must meet
the following requirements: Total length of wire interconnecting
units should be less than 1000 feet, be #18 gauge or larger and
be rated at least 300V. It is recommended that all units be on the
same fuse or circuit breaker. If local codes do not permit, be sure
the neutral wire is common to both phases.
THE PARTS OF THIS CO ALARM
CO Sensor:
Indicator Lights/Sounds:
AC Power:
Constant Green LED
DC Power:
Intermittent Green LED
Local Alarm:
Red LED flashes rapidly
Remote Alarm:
Red LED out.
Latching Alarm:
Red LED flashes every 5 seconds after local alarm stops
Push locking pin through
hole near battery drawer
on the back of the alarm.
1
54 3 2 1
A. Unswitched 120VAC 60 Hz source
B. To additional units; Maximum = 18 total
(Maximum 12 Smoke Alarms)
CO Alarm
5. Junction Box
Ceiling or Wall
6. Neutral Wire (White)
Power Connector
7. Interconnect Wire (Orange)
Wire Nut
8. Hot Wire (Black)
©2010 BRK Brands, Inc. a Jarden Corporation
Company (NYSE: JAH)
brkelectronics.com
3901 Liberty Street Road
Aurora, IL 60504-8122
All rights reserved
First Alert is a registered trademark of the First Alert Trust
BRK is a registered trademark of BRK Brands, Inc.
CM3075
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement