comarkcat2011
Foodservice and
Food Processing
Your Total Temperature Solution.
Designed for today’s busy restaurant
kitchens, food processing facilities
and storage areas, Comark’s line of
thermometers and related temperature
and humidity instruments lead the
industry. Whether it’s a waterproof
C28 thermocouple, PDT300 pocket
digital thermometer, or a FoodPro Plus
infrared with probe, Comark has a
solution to fit your budget.
2
Quick - Reliable - Accurate
C28 Temperature Kit
FPP FoodPro Plus
Time and Temperature in One Unit
Infared Thermometer
with Flip down
Penetration Probe
±1°F Accuracy, Waterproof, Long Battery Life,
Wide Variety of Probes
PDT300
Waterproof, Field Calibratable, and a Thin 1.5mm Tip
The most popular thermometer for measuring thin foods.
Accuracy: ±2°F (±1°C)
PDQ400
Prevent the outbreak and spread of foodborne
illness. Our range of monitoring and recording
instruments – N5001USB HACCP Auditor,
Diligence and EVt loggers, and the new RF500A
wireless system – offer accurate and tamperproof 24/7 recording of key parameters to
augment your HACCP and food safety program.
Waterproof, Field Calibratable,
with a Thin 1.5mm Tip
3
Designed especially for the food industry
Comark instruments meet a number of key
international standards:
• All of our key products are NSF certified so 300B
you can trust that they meet their published accuracy and specifications. Every component is food grade and manufactured in a sanitary facility.
• IP ratings tell the user immediately how
effectively the electrical instrument case
protects against the ingress of dust and water.
• The CE mark certifies that the product meets European health and safety regulations.
With our wide range of products, a knowledgable
staff and a commitment to your satisfaction, you
can count on Comark for answers to all your
temperature measurement needs.
New thin tip and field calibratable with
an accuracy of ±2°F (1°C)
UTL80
DT400
Refrigerated Drawer
Stick-on Thermometer
Waterproof, Field Calibratable,
Max Hold, Dishwasher Safe
Double stick tape for securing
to a refrigerated drawer
For more information: 1-800-555-6658
www.comarkUSA.com
Many Comark products are molded with
BioCote®, a patented silver-based antimicrobial
agent. BioCote® effectively inhibits the function,
growth, and reproduction of a wide range of
micro-organisms. Its protection is increasingly
accepted as part of HACCP, due diligence and
health and safety procedures. BioCote®
protection lasts for the life of the instrument
because the agent is present throughout the
case plastic and cannot rub off or leach out. The
active ingredients are registered with the EPA.
Ruggedized and Water Resistant
K-type Thermocouples
K-type probes
WB2/US
KM28 Temperature Kit
K-Type Thermocouple with Sub-miniature Connector
• Accuracy: ±2°F (±1°C)
• Range: -40° to 1,000°F (-40° to 500°C)
• Large LCD and auto switch-off to save battery life
• Water resistant and easy to clean
Wall Bracket
for KM28
membrane keypads
• Includes CRS/5 protective rubber boot
• Accepts a wide range of K-Type probes
(see page 5)
KM28/P5 includes:
• KM28
• PK19M reduced tip penetration probe
• CRS/5 protective rubber boot
• 9V battery
• AC315 carrying case
ATT29
PK24M/US
4’ Oven/Air Probe with Clip
Food/Frozen Penetration Probe (3.3mm)
Temperature range: -58° to +482°F (-50° to +250°C)
ATT50
Penetration Probe, 8” stem
SK25
Heavy Duty Surface Probe
Temperature range: -58˚ to 1200˚F (-50˚ to 650˚ C)
KM28Kit includes:
• KM28
• PK19M reduced tip penetration probe
• CRS/5 protective rubber boot
• 9V battery
KM28P5
ATT65
Needle Probe, 3.75” stem
4
5
SK42M
KM28Kit
Grill Surface Probe
Temperature range: -58° to +482°F (-50° to +250°C)
PK15M
Micro-Tip Penetration Probe (1.1mm)
Temperature range: -58° to +482°F (-50° to +250°C)
PK23M
Oven/Meat Probe
Temperature range: -58° to +482°F (-50° to +250°C)
C28 Temperature Kit
Designed for heavy use in today’s busy kitchens.
• Waterproof and Rugged
• High Accuracy – better than ±1°F
• Built-in Clock and Countdown Timer
• 7,000 hour battery life
• Range: -328° to 1112°F (-200° to 600°C)
• Data Hold and Auto Switch Off
• BioCote® Antimicrobial Protection
• Settable alarms
• 2 Year Warranty
• See probes on page 5
• Battery: 2 x AA Alkaline
(see Probes on page 5)
PK19M
Penetration Probe with Reduced Tip (1.5mm)
Temperature range: -58° to +482°F (-50° to +250°C)
SK40M
C28 Kit includes:
• C28 and PK19M penetration probe
Weighted Griddle Probe
Temperature range: +500°F (+260°C)
for up to 5 minutes
C20WB
Probe Caddy and Wall Bracket
C28Kit
PW70T
PW200T
Antibacterial Probe
Wipes
Tub of 70
Antibacterial Probe
Wipes
Tub of 200
For more information: 1-800-555-6658
www.comarkUSA.com
For more information: 1-800-555-6658
www.comarkUSA.com
K-Type Thermocouple with Sub-miniature Connector
T-TYPE THERMOCOUPLES and probes
economy TESTERS
N9094
P125F / P250F Pocketherm
T-Type thermocouple with extra tough waterproof case for food processing environments!
Thermistor and Thermocouple
• Waterproof and dust proof to IP68 standard
• Range: -328° to 752°F (-200° to 400°C)
• Accuracy at 73°F (+23°C): ±0.9°F (±0.5°C)
• Clock, countdown timer, data hold
• 10 year battery life
• 2 year warranty
• T-Type thermocouple standard or thermistor optional
• Optional CRS/6 protective rubber boot
• Probes must be purchased separately
N9094
N9094 Kit includes:
• N9094
• CRS/6 protective rubber boot
• PT24LC/US penetration probe
• MC28 case
Pocketherm is fast and accurate. Set different probe
angles for taking different temperatures. Audible alarm
plus flashing LEDs instantly indicate critical HACCP
zones. Choose the P125F for greater accuracy or the
P250F for higher range. Also available in °C.
Switches on when probe swings out!
LED indicators for quick recognition of HACCP temperature zones
NEAT:
Probe angles to fit the measurement
FAST:
Tapered probe for quicker response
COMPACT:
Fits easily in pockets or cases.
Yellow:
Green:
Red:
Cold Hold
Hot Hold
Ground Beef
Below 40°F
140°F to 180°F
Above +158°F
Specifications: P250F (thermocouple) P125F (thermistor)
Range:
Resolution:
Accuracy:
Battery:
Auto Off:
-58°F to +482°F
0.1°
±2°F, up to +257°F
9V
After 1 hour
-40°F to +257°F
0.1°
±0.9° from -4°F to +158°F
9V
After 1 hour
C22Kit
6
7
ST22L/W
Surface Probe with Heat Resistant Lead
Temperature range:
-148˚ to 482˚ F (-100˚ to 250˚ C)
C22
T-Type Thermocouple with locking probe connector
PT19L
Penetration Probe with Reduced Tip (1.5mm)
Temperature range:
-148° to +482°F (-100° to +250°C)
PT24LC/US
Food/Frozen Penetration Probe (3.3mm)
Temperature range:
-148° to +482°F (-100° to +250°C)
TX27L
Thermometer Test Cap
The TX27L simulates a temperature of 32°F (0°C) when attached to a thermometer. Compare this point to the reading on the thermometer to ensure
calibration.
• Calibrated at +32°F in a UKAS (NIST) laboratory with a 1 Year Certificate
• Check the accuracy of any Comark thermistor thermometer with a
Lumberg type probe connector. C22, N9094, N2012
PT23L/INT
Needle Probe, 4” Stem
Temperature range:
-148° to +482°F (-100° to +250°C)
DT15 / DT20
DT33/P1
DT33/P3
Economical Thermistor Thermometer
Combination Probe Kit
Food Test / Convenience Kit
These water-resistant, handheld units offer speed and
accuracy with interchangeable probes and a large easyto-read display. Use to test yeast temperatures in baking
and brewing, cooked meat temperatures, or the farthest
reaches of a walk-in cooler. Includes ATT55 probe, AC22
case, and AA battery.
Check everything in the kitchen
with one kit. Includes:
• DT33
• ATT19 oven probe
• ATT39 handle
• ATT40 surface probe
• ATT41 liquid immersion probe
• ATT42 air probe
• Carrying case
This kit includes:
• DT33 temperature tester
• Soft pouch with belt loop
• ATT54A food probe
• Hard case
• Battery
• Instructions.
Specifications
DT15
DT20
Accuracy:
Range
Data hold
°C/°F
Min/Max
1 Year Warranty
Accessories:
±1°F from 32° to 160°F
±2°F outside that range
-40° to 300°F
No
No
No
±2°F (±1°C)
ATT55
ATT56
ATT57
ATT58
Liquid probe
Air probe
Surface probe
Extension probe
-40° to 300°F
Yes
Yes
Yes
Specifications DT33
Thermocouple J-Type
Accuracy
±0.1%, ±1.3°F
Resolution
1.0°
Range (°F)
-125° to 500°
Battery
9V
1 Year Warranty Yes
For more information: 1-800-555-6658
www.comarkUSA.com
For more information: 1-800-555-6658
www.comarkUSA.com
For complete assurance that the unit and probe “system” accuracy is
better than 1°F, the C22 with a Comark locking probe connector is your
best answer. The C22 comes in the same waterproof and rugged case
as the C28 and also includes the Clock, Countdown Timer, DataHold and
Auto Switch Off features.
• System Accuracy (Type-T Thermocouple): ±0.9°F (0.5°C)
• System Accuracy (PST Thermistor): ±0.6°F (0.3°C)
• Range: -328° to 752°F (–200° to 400°C)
infrared THERMOMETERS
8
9
Safer
Microorganism
growth inhibited
41°F
(5°C)
Ripening
Fermenting
Warming-Cooling
Heavy growth of
Microorganisms
41°F to 135˚ F
(5°C to 57˚C)
Safer
Pasteurization
Sterilization
Conservation
Warm Holding
Microorganism
growth inhibited
or destroyed
135°F
(57°C)
FP FoodPro
KM842
RAYMTFSU
Infrared thermometer with an added
flip-down RTD sensor probe and integral
countdown timer.
• Probe Range: -40° to 400°F
(-40° to 200°C)
• Probe Accuracy: ±1°F from +23
to 150°F
• Probe is replaceable in the field:
FP-Probe
• Infrared Range: -30° to 525°F
(-35° to 275°C)
• Distance to Spot Size Resolution
(D:S) 2.5:1
• Battery: 9V Alkaline
Quickly scan food surface temperatures
using unique target illumination beam.
• “HACCP Check” feature graphically displays critical temperature zones.
• Range: -20° to 400°F (-30° to 200°C)
• ±2°F Accuracy from +32° to 150°F or 1.5% of reading
• Emissivity: pre-set at 0.97
• Distance to Spot Size Resolution (D:S) 2.5:1
• Battery: AA Alkaline
Rugged IR Thermometer
Economy Infrared Thermometer
for Food Service Applications
Specifications
Sighting Case
Measurement Range
Accuracy
Ratio of Distance Spot to Size
Response Time
Ambient Operating Range
Emissivity (pre-set)
Backlight
Battery
Warranty
FPP
LED
Belt Pouch included
-30° to 525°F (-35° to 275°C)
73°F and up, ±1% or ±2°F,
whichever is greater
2.5:1
500m second
32° to 122°F
10 to 95% RH
0.95
Yes
9V Alkaline
2 years
When surface temperature measurements
need to be fast and accurate, the KM842
is hard to beat.
• Perform HACCP temperature
measurements at receiving
• Monitor surface temperatures during
cooking
• Check hot holding and serving
temperatures
• Ensure uniform storage temperatures
FP
LED
n/a
-20° to 400°F (-30° to 200°C) 73°F and up, ±1% or ±2°F,
whichever is greater
2.5:1
500m second
32° to 122°F
10 to 95% RH
0.95
Yes
AA Alkaline 2 years
Precisely locate target measurement
point through laser sighting. For HACCP
temperature measurements at receiving,
during cooking, holding and serving.
• Switchable ˚F/˚C with backlight
• Auto switch off
• Single degree resolution
• Emissivity pre-set to 0.95
• 7 second display hold
• 4:1 distance to spot size (D:S)
• Optional soft pouch (AC814T)
• ±2˚F accuracy in critical food zone,
32˚ to 150˚
KM842
Single point
Hard case
-25° to 750°F (-32° to 400°C)
73°F and up, ±1% or ±2°F,
whichever is greater
12:1 500m second
32° to 122°F
10 to 95% RH
0.95
Yes
9V Alkaline
1 year
RAYMTFSU
Single point
Optional soft pouch (MTAPK)
-25° to 400°F (-30° to 200°C)
73°F and up, ±1% or ±2°F,
whichever is greater
4:1
500m second
32° to 122°F
10 to 95% RH
0.95
Yes
9V Alkaline
1 year
For more information: 1-800-555-6658
www.comarkUSA.com
For more information: 1-800-555-6658
www.comarkUSA.com
Chilled and
Frozen Storage
Risk Zone
FPP FoodPro Plus
pocket digital THERMOMETERS
PDQ400
Waterproof, Field Calibratable,
and a Thin 1.5mm Tip
High Accuracy Pocket Digital Thermometer
Waterproof and field calibratable
Max temperature hold for use in commercial
dishwashers
Range: -4° to 400°F (-20° to 200°C)
Accuracy: ±1°F (0.5°C)
300
Simple, Compact Styling and a
Great Price for Excellent Value!
Now field calibratable with a thin
1.5mm tip!
Range: -40° to 300°F (-40° to 150°C)
Accuracy: ±2°F (1°C)
Data Hold
Auto Power Off
300B
Ruggedized and Water Resistant
For added protection, the model 300 is
packaged with the ARB300A protective rubber
boot on a single slide card.
10
11
PDT300
Waterproof, Field Calibratable, and a Thin 1.5mm Tip
DT400
Waterproof, Field Calibratable,
Max Hold, Dishwasher Safe
A new extended range to cover
all kitchen needs including fryer
temperatures and dishwasher cycles.
The 1.5mm tip means fast response
and easy measurement of thin foods.
Range: -4° to 400°F (-20° to 200°C)
Accuracy: ±1°F (0.5°C)
314
The most popular thermometer for measuring thin foods.
Range: -58° to 300°F (-50° to 150°C)
Accuracy: ±2°F (±1°C)
Waterproof Thermometer
Features a 5-inch stem and easy to clean
membrane keypad.
Range: -58° to 300°F (–50° to 150°C)
Accuracy: ±2°F (±1°C)
Field calibratable
550B
Range: -40° to 550°F
Accuracy: ±2°F to 392°F, 1.5% otherwise
Field calibratable
KM14
Check Dishwasher Cycles
Check dishwasher rinse temperatures
with this new waterproof pocket digital
thermometer.
Range: -4° to 400°F (-20° to 200°C)
Accuracy: ±2°F (1°C)
Maximum temperature hold
Field calibratable
Stem diameter of 3.3mm
DT300
Rugged and Dependable
Range: -58° to 300°F
Accuracy: ±2°F
Field calibratable
Data Hold
Auto Off
The sensor in all Comark pocket digital
thermometers is positioned directly at the
tip of the stem. So you are always ensured
of a quick, accurate and reliable measurement.
For the fastest readings, select a model with
a thin 1.5mm stem.
For more information: 1-800-555-6658
www.comarkUSA.com
For more information: 1-800-555-6658
www.comarkUSA.com
High Temperature Range with Water
Resistant ARB300 Boot.
calibration INSTRUMENTS
timers and alarms
Temperature and measurement instrument
performance is vital in almost every application,
especially throughout the food industry.
Performance can be affected by many factors including
use and abuse and the age of the instrument.
Regular, professional calibration checks are recommended,
with certification as required, especially for companies
with HACCP procedures and other quality systems.
In the meantime, calibration can be monitored with
Comark simulators, reference thermometers and
C9040K/US
validation equipment.
Temperature Simulator
Checks calibration of most K-Type
thermocouples (C28, KM28)
• Supplied with UKAS (NIST) Certificate of Calibration
• Ideal for companies with HACCP programs
• T-Type version available as C9040TL
Simulated Temperature Points
UTL264
UTL882
Count Up, Count Down Timer
Digital Timer with Clock
Extra large digits make the UTL264 easy to
read. The audible buzzer clearly announces
when countdown has been reached. Timing capacity of 99 minutes 59 seconds and repeatable
memory make this timer a value-added tool.
Features easel stand and magnetic clip back.
Battery included (AAA).
The UTL882 with magnet, pocket clip and
stand has a count-down capacity of 24 hours.
The “Memory” timer allows you to store a
preset time. Count-up in one second
resolution up to 24 hours. All three functions,
clock, timer and count down, can operate
simultaneously. Battery included (AB13).
+14°F, +32°F, +122°F, +212°F,+ 932°F
(-20°C, 0°C, +50°C, +100°C, +500°C)
12
UTL884
Mechanical Timer
This easy-to-use 60 minute
timer has a long-ring bell alarm.
13
KM820/VAL
Validator
Use this heavy duty aluminum cup (shown above) to
check the calibration of infrared or contact thermometers.
• Also available in a calibration check kit with the
KM20REF reference thermometer and carrying case.
206 Timer
4-Channel Pocket Timer
Pocket timer with clock and count-up offers
excellent versatility. Four independently
programmable channels operate simultaneously, each with unique alarms. Pocket clip, stand,
and AB13 battery included.
C22REF Kit
Use this high-accuracy reference thermometer for checking the calibration of all types of thermometer and probe
combinations.
• PT100 sensor and permanently attached probe for
highest system accuracy
• Complete with 5-Point UKAS Certificate of Calibration
• Auto switch off
• Supplied with hard carrying case
• Can be used with the KM820/VAL Validator
Reference Thermometer Kit
Kit includes:
• C22 Thermometer
• PX22L Thermistor Probe
• TX27L +32°F Temperature Test Cap with UKAS
(NIST) certificate
• MC28 Hard Carrying Case
SWT2
Stopwatch Timer
Stopwatch and countdown timer in one unit
with memory, 18” cord and AB13 battery.
High-Low Cooking or
Cooling Alarm
For economic HACCP compliance
in cooking and cooling, just set
the alarm. It will sound when the
desired temperature is reached.
It’s the first thermometer to do
this in one simple unit. Alarm can
be set for temperature or time.
Switchable from °F to °C. Comes
with adjustable back, magnet and
AAA battery. You can close the
oven or refrigerator door on the
36” stainless steel, heat-resistant
probe.
Range: 14° to 400°F (-10° to 200°C)
Accuracy: ±3.5°F
Replacement probe: ATT865
For more information: 1-800-555-6658
www.comarkUSA.com
For more information: 1-800-555-6658
www.comarkUSA.com
KM20REF Kit
HLA1
pocket dial THERMOMETERS
refrigerator and freezer
EFG120C
Tough, durable, accurate
Economy
Comark’s dial thermometers can’t be beat. All models feature
stainless steel construction and a plastic watertight lens.
• ±1 division accuracy
• Magnifying dial cover
• Recalibration nut
• 1 Year Limited Warranty
FG80AK
With Comark’s patented calibration nut, you can easily calibrate
your bi-metal thermometer in seconds with only a twist of your
fingers. Once it is set, the nut stays tight and firmly in place.
T220A Display Box
This thermometer hangs or stands,
has easy-to-read bold numbers, and
a dual scale. Non-toxic, spirit filled.
Ranges: -40° to 80°F (-40° to 27°C)
Accuracy: ±1 division, 2° div. °F (1° div. °C)
T220A
This non-toxic spirit filled
economy thermometer has
protective end caps, bold
numbers for easy reading,
and can hang or be
mounted.
Ranges: -40° to 120°F,
(-40° to 50°C)
Accuracy: ±1 division,
2° div. °F (1° div. °C)
Calibratable Dial Thermometer
1” dial, 5” stem
T220A: Display box of 12
Stock No.
Dial
Stem Div.
NSF
T125
1”
5”
2°
Yes
T160A, T160AK 1”
5”
2°
Yes
T220A, T220AK 1”
5”
2°
Yes
T550AK
1”
5”
5°
Yes
T200L
1”
5”
2°
No
T160/3 1-3/4” 5”
2°
Yes
T220/3 1-3/4” 5”
2°
Yes
T220/38A 1-3/4” 8”
2°
Yes
T550/38A 1-3/4” 8”
5°
Yes
TC100A
1”
5”
1°
Yes
TCF220/3 1-3/4” 5”
2°/1°
Yes
“K” indicates slide card.
T220/38A
T550/38A
T200L
Large Face, 8” Stem, and Clip
0º to 220ºF
Large Face, 8” Stem, and Clip
50º to 550ºF
Latte Thermometer
Make steam table measurements with these large-face, easy-to-read
thermometers. You can also use the T220A/38A for lattes.
Check milk temperatures in lattes, espresso
drinks and hot cocoa. The sturdy clip attaches
securely to cups or pitchers.
15
RFT2AK
ERF1K
UTL140
UTL80
This thermometer hangs or stands
with easy-to-read bold numbers.
Blue and green zones indicate safe
temperatures while red indicates
possible spoilage.
Specify boxed or carded (K).
Range: -20° to 80°F
Accuracy: ±1 div., 2° div. °F
(1° div. °C)
Economy
Indoor/Outdoor
Stick-on Thermometer.
Refrigerated Drawer
Stick-on Thermometer
Includes both adhesive
and magnetic mount.
Range:- 40° to 120°F,
(-40° to 50°C)
A modified RFT2A
features double stick
tape for securing inside
a refrigerated drawer.
Range: -20° to 80°F
(-30° to 25°C)
Accuracy: ±2°F
This dual-scale economy thermometer hangs or stands and
has easy-to-read bold numbers.
Made of stainless steel.
Ranges: -20° to 86°F
(-30° to 30°C)
Accuracy: ±1 division,
2° div. °F/°C
WT4
CWT
FWT
Cooler Wall Thermometer
Freezer Wall Thermometer
Wall Thermometer
6” diameter face features brightly
colored HACCP danger zones.
Comes on display card with mounting
bracket and screws, included.
Range: +10° to 80°F
6” diameter face features brightly
colored HACCP danger zones.
Comes on display card with mounting
bracket and screws, included.
Range: -10° to 80°F
Spirit filled, 9-inch length,
plastic construction.
Range: -20°F to +120°F
(-10°C to +50°C)
For more information: 1-800-555-6658
www.comarkUSA.com
For more information: 1-800-555-6658
www.comarkUSA.com
14
Ranges
25° to 125°F
-40° to 160°F
0° to 220°F
50° to 550°F
100° to 200°F
-40° to 160°F
0° to 220°F
0° to 220°F
50° to 550°F
-10° to 100°C
0° to 220°F
(-10° to 100°C)
oven • MEAT
candy • GRILL • HUMIDITY
CD550
DHH
DOT2AK
Meat Thermometer
Dial Hot Holding Thermometer
Oven Thermometer
This dishwasher safe thermometer
has an adjustable temperature
indicator and dual range readings.
Range: 120° to 200°F (60° to 85°C)
Accuracy: ±1 division, 2° div
Quickly see if hot food is staying hot!
HACCP zone at 140°F+
Range: 100° to 180°F (38° to 80°C)
Easy-to-read bold numbers are
displayed in colored zones for
quick reference. Hangs or stands.
Specify boxed or carded (K).
Range: 200° to 550°F (100° to 280°C)
Accuracy: ±1 division, 25° div.
MT200K
16
CD400K
CF400K
Candy Thermometer
Candy Thermometer
Candy Thermometer
Dishwasher safe, clip included,
adjustable temperature indicator,
2 ¼” dial face, 12” stem.
Range: 50° to 550°F
Accuracy: ±1 division, 5° div.
Dishwasher safe, stainless steel
construction, adjustable temperature
indicator, 2 ¼” dial face, 4 ½” stem,
and dual scale reading.
Range: 100° to 400°F
(40° to 200°C)
Accuracy: ±1 division, 5° div.
This spirit glass thermometer,
constructed of stainless steel,
has dual range and a clip on
the back.
Range: 100° to 400°F
(40° to 200°C)
Accuracy: ±1 division, 2° div.
17
RH60 • RF60A
Vapor Tension Thermometers
These thermometers have a 2” dial, a 48”
nickel-plated capillary for easy measurement, and
easy-to-read, color-coded scales. A recalibration
pointer makes calibration easy. RH60 features
a hanger strap and bottom connection. RF60A
has front flange mount and back connection.
Range: -40° to 60°F (-40° to 15°C)
Accuracy: ±1 division, 2° div.
DTH880
GT500K
EMT2K
EOT1K
OT600K
Economy Meat Thermometer
Economy Oven Thermometer
Oven Thermometer
Grill Thermometer
Stainless steel body, bold numbers for easy
reading and dual scale measurement.
Range: 140° to 190°F (60° to 87°C)
Accuracy: ±1 division, 10° div.
This economy stainless steel
thermometer measures in dual scale.
It hangs or stands and bold numbers
for easy reading.
Range: 100° to 600°F (50° to 300°C)
Accuracy: ±1 division, 25° div.
This glass and mercury thermometer
hangs or stands and its stainless
steel frame folds shut for protection.
Range: 100° to 600°F
Accuracy: ±1 division, 10° div.
Measure grill surface temperature with
easy-to-read dial.
Range: 0° to 500°F
Accuracy: ±1 division, 5° div.
This unit can be wall mounted or used with a
handy built-in tilt stand. It measures humidity
from 25 to 95% RH and temperature from 32°
to 122°F (0° to 50°C). Features include comfort
zone indication and min/max readings. Uses a
“AAA” battery and comes with a 1 Year Limited
Warranty.
Accuracy: ±2°F (1°C), 32° to 104°F (0° to 40°C)
Humidity: ±5% RH, 40% to 80%, ±7% below
40% or over 80%
For more information: 1-800-555-6658
www.comarkUSA.com
For more information: 1-800-555-6658
www.comarkUSA.com
Compact Temperature and Humidity Tester
temperature and humidity monitoring
Comark Diligence EV Data Loggers measure both humidity and temperature when
monitoring food in storage, transit or processing as well as pharmaceutical and general industrial
applications. Models with thermistor sensors offer highest accuracy. K or T-Type thermocouples provide a wide
measurement range. With the addition of the N2000Box, the N2012 can measure up to five separate
channels with a single logger using four external probes and one internal sensor. With the N2000ADP/K, the
N2014 can measure up to four channels using three external thermocouple probes and one internal sensor.
N2011
N2012
N2013
N2014
N2000Box
18
19
Diligence EV Product Line
•
•
•
•
•
N2011
N2012
N2013
N2014
N2000CRUSB
N2000BOX
N2000ADP/K
EVSW
EVSWPRO
PX31L
PK31L
ADP55
•
•
•
•
•
For more information: 1-800-555-6658
www.comarkUSA.com
•
Tough, molded cases, dust and waterproof to IP67 standards
Large memory capacity of up to 16,000 readings
Instrument accuracy of 0.9°F, +0.3% of reading at +68°F
Ability to log over multiple periods
Windows™ based Evolution software for fast data download
and analysis
LED indication of active logging and temperature or humidity
alarm conditions
LCD displays on selected models for instant checks on current
readings and alarms
Additional beeper warning of temperature and humidity
alarm conditions
Single-button control of main functions
Ability to scroll LCD display between readings from all sensors
in use on
Wide range of Comark temperature probes available
32K Memory Specifications:
1 channel
2 channels
3 channels
4 channels
5 channels
16,000 samples
8,000 samples
5,300 samples
4,000 samples
3,200 samples
Communications
Download Time
Logging Frequency
Battery LIfe
LED Indication
Via infra-red interface
3 minutes for 10,000 readings (typical)
Programmable between 1 second
and 99 hours
Up to 5 years
Red = Alarm, Green = Logger active
Measurement Range
N2011
Temperature
-40° to +158°F (-40° to +70°C)
N2012
Internal Sensor
External Sensor
-40° to 158°F (-40° to 70°C)
-40° to +302°F (-40° to 150°C)
N2013
Temperature
Humidity
-4° to +140°F (-20° to +60°C)
0 to 97% RH, non-condensing
N2014
K-Type
T-Type
-328° to +2,500°F (-200° to +1,372°C)
-328° to +750°F (-200° to +400°C)
Internal Temperature Sensor with LCD
Internal Temperature Sensor and up to 4 external sensors with N2000 Box with LCD
Single Temperature and Humidity Alarm,
with LCD
Thermocouple Logger with range of –328°F to +2500°F with N2000ADP/K
and appropriate probes with LCD
Communications Interface with USB connection.
Multi-link Box to connect up to 4 probes
to N2002 or N2012.
Adaptor to connect up to 3 thermocouple
probes to N2004 or N2014
Standard Software
Software for use with 21CFR Part II
Penetration Probe, 3 ft long with 3” stem
for N2002 and N2012.
Penetration Probe, 3 ft long with stem for
N2014.
USB to Serial Port Adapter
For more information: 1-800-555-6658
www.comarkUSA.com
Features:
LOGGERS - EVt2 and N3014
HACCP AUDITING
EVt2 Temperature Logger
N5001USB HACCP Auditor
Multi-Use Logger makes it easy to comply with USDA and HACCP
requirements by monitoring the temperatures of meat, seafood and
produce shipments 24/7.
• Review maximum, minimum and average trip temperatures plus
total time in alarm, right on the screen. Accept or reject a shipment
in seconds.
• Download data to a PC for permanent HACCP records
• Single button starts/stops logging
• Up to 3,000 readings with 1 sec to 99 hour intervals
• Special software for 21 CFR Part 11 compliance
• BioCote® Antimicrobial Protection
• Waterproof and rugged IP67 case
Maintain all your Food Safety and HACCP
records in one convenient database.
Eliminate clipboards and manual
record-keeping.
EVt Line
EVt2
EVSW
EVSWPRO
EVTCRUSB The N5001USB is a unique data management
tool for all aspects of a food service or food
processing operation. You can record
temperatures at receiving, storage, prep, hot
holding or cold holding plus incorporate the
many other checklists you’ve been filling
out by hand. All this with a simple series
of screens that are unique to your
operation. Design them yourself with
our free-form software.
Transport Logger, multi-use
Software, standard
Software for use with 21CFR Part 11
PC Interface for programming and downloading
data with USB connector
• Corrective Action selections ensure that failures are corrected immediately
• Filter data to quickly find or analyze
non-conformances
• Auditor data is in real time and is
tamper-proof
• Export to Excel or Access for reporting to
upper management
• Simulation sequence allows you to fine-tune any changes before you finalize a program
• Instruction screens can be included to aid
in employee training
• Programming offered via special quotation
• T Type thermocouple probes with 6 pin
socket for secure attachment
• Range: -328° to 752°F (-200° to 400°C)
• Accuracy with probe: ±2°F (1°C)
• Large, backlit graphic display
• BioCote® antimicrobial protection
• Waterproof and rugged IP67 case
• Battery: 2 x AA Alkaline
20
21
Typical screens
N3014/US
Monitor 8 temperature channels continuously from your office.
• Large memory capacity of 64k
• Audible and visual alarm indication
• RS232 port for data communications, programming and serial
printing
• Accepts industry-standard sub-min thermocouple connections
• Range: -325° to 3200°F
• Accuracy for K-Type thermocouple: ± 0.1 % of reading, ± 0.4 °F
• Rechargeable battery or main power connected
N3014/US Product Line
N3014/US
EVSW
ADP46
ADP53
ADP54/US
LC30
AK31M
AK36M
Graphic Display Monitor
Software
Printer Connector Cable
RS232 Cable
Power Supply for US only
Hard Carrying Case
Flexible Thermocouple with 10 meter lead, Type K
Flexible Thermocouple with 50 meter lead, Type K
See our web site for additional probes.
N5001USB Auditor Product Line
N5001USB Auditor
CRS/6 Protective Rubber Boot
SWAUDITOR Software
MC28 Hard Carrying Case
PT19L Penetration Probe with
1.5mm tip
PT24LC/US Penetration Probe with
3.3mm tip
For more information: 1-800-555-6658
www.comarkUSA.com
For more information: 1-800-555-6658
www.comarkUSA.com
Logging Monitor with Graphic Display
WIRELESS MONITORING
Mesh Networking
Specifications:
Signal via route B-D is blocked by open chill room door.
System automatically re-routes signal via B-F or B-C.
RF500A Gateway
Channels Transmitters Storage Capacity RF Frequency Battery Life Power Sources Clock Accuracy Dimensions Weight A
B
C
E
D
F
G
22
MAIN LAB
OFFICES
10” Double
Glazing
RF500
Wireless Monitoring System
This system provides effortless 24/7 monitoring of
temperature, humidityand door events. Low power
RF technology with built-in mesh networking, and
transmitters with bi-directional communications offer:
Instant alarm notification is sent via screens, SMS,
voice or email to your PC, PDA, mobile or pager.
• Accurate, tamper-proof records
• Secure multi-user access to data via the internet at any time
• Alarm notification via email, phone or pager
• Transmitters that are waterproof and accurate with long
battery life
• Compliance with legislative and regulatory requirements
• Plus, it’s easy to install, use and maintain
Manual checks on temperature and
humidity are a thing of the past.
Advanced features include:
ADR – Automatic Data Retrieval.
Waterproof Transmitters
with LCD
The RF500A employs a system of remote
sensors and probes to automatically
collect and transmit data to a Gateway
unit which manages the system and
stores the data.
The RF500A Gateway requires no
specialized PC software. It connects
directly to the local area network
permitting 24/7 single or multi-user
access via the internet at any time.
The system provides a full audit trail,
electronic signatures and data
protection to meet the requirements
of 21 CFR Part 11.
In the event of readings falling
outside pre-set limits, alarm notification
via screens, SMS, email or voice
contact you immediately, so immediate
corrective action can be taken.
In the event of a power failure, data is
stored in the RF500A transmitter then
automatically transmitted to the
Gateway as soon as the network is
restored, so no data is lost.
Transmitters are fully waterproof and
include an LCD for instant data display
and an LED for local alarm indication.
Low battery indicator on each unit is
viewable via the web. Choose either a
model with a 3 year battery life or AC
power transformer.
• RF512 has an integral temperature
sensor plus connectors for two
external thermistor probes and an
external door sensor.
• RF513 has integral temperature and
humidity sensors and a connector for
an external door sensor.
• RF516 is a precision temperature
transmitter with an internal
temperature sensor plus connectors for one external PT100 probe and an
external door sensor.
Mesh Network – established through
powered transmitters.
This enables the system to automatically
adjust to any changes in the environment, rerouting signals as required to
ensure that the data is always returned
to the Gateway.
Transmitters – RF512, RF513, RF516
Temperature Measurement Range:
Internal Thermistor Sensor
-22° to 158°F (-30° to 70°C)
RF512, RF516 Integral Thermistor Sensor
-22° to 158°F (-30° to 70°C)
RF513 External Thermistor Sensor -40° to 257°F (-40° to 125°C)
External Pt100 Sensor
-328 to 750˚F (-2 00˚ to 400˚C)
Humidity Measurement Range 10 to 90% RH
System Accuracy with Standard Sensors:
Temperature
External Thermistor: -4° to 158°F ±0.9°F (0.5°C)
External Thermistor: full range ±2°F (1°C)
Internal Thermistor : -4° to 158°F ±1°F (0.5°C)
Humidity 10 to 90% RH ±3%
Logging Memory 32,000 records
Logging Frequency Programmable between 1 and 60 minutes
Monitoring Frequency 1 minute
Replaceable Lithium ‘C’ Cell (Part No RFBATT)
Battery Type Battery Life Up to 3 years
(when used at 73°F room temperature)
Dimensions L 170mm x W 83mm x H 34mm
Weight 200g (0.5 lb)
23
See our separate brochure on the RF500A system for more details
or visit our website.
• Large LCD allows local view of temperature, RH (RF513),
and door opening information plus alarms and RF status
• LEDs for active/alarm indication
• High gain antenna
• Selectable scales ˚F or ˚C, %RH or DP (RF513)
• Compact, waterproof case with BioCote antimicrobial
surface protection
• Door event sensor
• AC/Main power connector
• Secure Lumberg connector for probes
For more information: 1-800-555-6658
www.comarkUSA.com
For more information: 1-800-555-6658
www.comarkUSA.com
Signal via route B-D blocked
by open chill room door.
System automatically re-routes
signal via B-F or B-C.
Up to 512
Up to 128
Up to 10 years of storage
2.4 GHz using IEEE 802.15.4
4 hours (rechargeable)
110V adaptor, rechargeable Ni-Mh battery
4ppm (2 minutes per year)
L 259mm x W 189mm x H 92mm
3.7kg (8 lb)
What is BioCote®?
BioCote® is a silver based anti-microbial agent that is impregnated into the
instrument case during molding. BioCote® effectively inhibits the function,
growth and reproduction of a wide range of micro-organisms and its protection
is increasingly accepted as part of HACCP, due diligence and health and safety
procedures. BioCote® protection lasts for the life of the instrument because the
agent is present throughout the case plastic and cannot rub off or be leached
out. BioCote® active ingredients are registered with the EPA. Although BioCote®
inhibits the growth of micro-organisms on the instrument case, it does not
protect an individual against such harmful organisms or remove the need to
practice the highest standards of personal and product hygiene and cleanliness. BioCote® is currently found in the following Comark products: C22, C28,
EVt2, 300, 300B, DT400, KM14, PDQ400, PDT300, N5001USB, N9094, P125, P250
WARRANTY
All Comark instruments have a
minimum One Year Warranty unless
otherwise stated. The warranty for
temperature probes is six months
and all other probes and electrodes
are unwarranted because the
conditions of use are beyond our
control. The Comark Warranty
covers manufacturing defects and
component failure and applies
worldwide. In line with our policy
of continuous development, we
reserve the right to alter any
product specifications without
notice. Comark has an accredited
UKAS (NIST equivalent) calibration
laboratory for temperature and
humidity measurement and offers
full service and recalibration facilities.
Comark Instruments is committed
to providing quality and affordable
products to the food service industry.
Our thermometers and humidity
testers bring speed, accuracy and
reliability to the transport, testing
and storing of food under FDA Food
Code and HACCP guidelines. A large
variety of products, a well-trained
staff, and a commitment to customer
satisfaction mean you can come to
us for answers to all your temperature
measurement needs!
Comark Instruments
P.O. Box 500
Beaverton, OR 97077
DT400 Digital
Thermometer
PDQ400 Pocket
Digital Thermometer
Waterproof, Field Calibratable,
Dishwasher Safe with Max Hold
Feature.
Waterproof, Field Calibratable,
with a Thin 1.5mm Tip
Email: [email protected]
For more information:
1-800-555-6658
www.comarkUSA.com
©2011 Comark Instruments
Specifications subject to change without notice.
Printed in U.S.A. 07/2011 3331099 B-EN-P Rev B
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement