Mitsubishi Programmable Controllers MELSEC-AnS/QnAS (Small Type) Series Transition Guide From MELSEC-AnS/QnAS (Small Type) Series to MELSEC-Q Series Comprehensive, risk-free upgrade solutions Feb. 2013 Edition From MELSEC-AnS/QnAS Series MELSEC-Q Series Complete Support for AnS/QnAS Series Upgrades Mitsubishi Electric offers a carefully engineered combination of hardware, software, and support designed to allow you to upgrade legacy MELSEC-AnS/QnAS Series controller systems to the current MELSEC-Q Series with minimum disruption to your plant operations. 1 Upgrade Options P.3 Related information AnS/QnAS→Q Technical bulletins Replacement handbooks Convert existing AnS/QnAS Series programs A/QnA -> Q Conversion Support Tool AnS/QnAS→Q P.5 MELSOFT P.9 Replace to Q Series module reusing existing wiring AnS/QnAS→Q QA extension base unit Q series large type base unit (AnS Series size) Upgrade tool/FA goods (manufactured by Mitsubishi Electric Engineering Co., Ltd.) P.14 Replace MELSECNET/MINI-S3 with CC-Link CC-Link A2C shape CC-Link remote I/O module MELSECNET/MINI-S3 I/O module wiring conversion adapter Use modules that have a high rated input current and are compatible with proximity sensor inputs 24 V DC input modules with a rated input current of 6 mA P.16 AnS/QnAS→Q Replace Temperature control modules without changing of the connected existing temperature sensor Temperature contorol modules P.16 AnS/QnAS→Q Replace high-speed counter modules without restrains from specifications of the connected external devices High-speed counter modules P.16 AnS/QnAS→Q Replace the positioning module while keeping the existing external devices Positioning module Use existing network cables to construct MELSECNET/H network systems MELSECNET/H network module (twisted bus type) MELSECNET/H network module (optical loop type, coaxial bus type) MELSECNET/10 network module (Production continues) Step-by-step replacement from MELSECNET(2), /B to MELSECNET/10 MELSECNET(@)-MELSECNET/10 gateway set Add Q Series module to existing MELSECNET(2) or MELSECNET/B system MELSECNET(@), MELSECNET/B local station data link modules Product list List of products used for upgrade, Models in continuous production, Discontinued products, Service availability period Support capabilities Global FA centers P.16 AnS/QnAS→Q P.17 Network P.19 Network P.20 Network P.21 Support P.26 Support 2 At-a-glance technical overviews Technical Bulletins Production discontinuation of MELSEC-AnS/QnAS (small type) series and MELSEC-I/OLINK FA-A-0142 Precautions for replacing QnUD(E)(H)CPU with QnUDVCPU FA-A-0147 In-depth technical documentation resources Replacement Handbooks Transition from MELSEC-AnS/QnAS (Small Type) Series to Q Series Handbook L(NA)08219ENG • Fundamentals L(NA)08220ENG • Intelligent function modules Transition from MELSEC-A/QnA (Large Type), AnS/QnAS (Small type) Series to Q Series Handbook L(NA)08048ENG • Network Modules L(NA)08050ENG • Communications Transition from MELSECNET/MINI-S3, A2C (I/O) to CC-Link Handbook L(NA)08061ENG Transition from MELSEC-I/OLINK to AnyWire DB A20 Handbook*1 L(NA)08249ENG Transition from MELSEC-I/OLINK to CC-Link/LT Handbook L(NA)08062ENG *1: AnyWire products are not available in some countries. Please consult your local Mitsubishi Electric Corporation representative for details. • For the products shown in handbooks for transition, catalogues, and transition examples, refer to the manuals for the relevant products and check the detailed specifications, precautions for use, and restrictions before replacement. For the products manufactured by Mitsubishi Electric Engineering Co., Ltd., and other companies, refer to the catalogue for each product and check the detailed specifications, precautions for use, and restrictions before use. The manuals and catalogues for our products, products manufactured by Mitsubishi Electric Engineering Co., Ltd., are shown in Appendix of each handbook for transition. • Products shown in these handbooks are subject to change without notice. 3 MEMO 4 Automatic Program Conversion: GX Developer & A/QnA -> Q Conversion Support Tool Minimize program conversion eﬀorts by the GX Developer's PLC Type Change function and A/QnA -> Q Conversion Support Tool. ■Q Conversion Support Tool boosts productivity by avoiding time spent consulting manuals for guidance on ﬁnishing program conversions. Change to Q beforehand Convert AnS/QnAS programs to Q programs with the GX Developer's PLC Type Change function. AnS/QnAS program Original project PLC Type Change Q program GX Developer Converted project (after PLC type change) Enter the conﬁguration information on the existing AnS/QnAS special function modules. Point 1 ●Specifying a module helps to replace the X/Y device and No. of buﬀer memory with the compatible one. A/QnA -> Q Conversion Support Tool Output Diﬀerences between two programs Diﬀerences between the two programs and guidance on how to complete the conversion are displayed. guidance ﬁle <See on p. 6.> Point 2 5 ●No need to manually compare the existing program with the converted program! HTML conversion <See on p. 7-8.> Point 3 ●A list of unconverted instructions and devices is displayed. ●Information on recommended products for unconvertible special function modules is displayed. Note 1: This support tool applies to ladder programs only. Note 2: A/QnA -> Q Conversion Support Tool Version.1.08 or later is required with the replacement to Universal model QCPU. Note 3: GX Developer cannot support the PLC type change to High-speed Universal model QCPU. Please change the PLC type by the following application and method. ①GX Developer: Convert PLC type to Universal model QCPU then save the project data. ②A/QnA -> Q Conversion Support Tool: Output "Diﬀerences between two programs" and "HTML conversion guidance ﬁle". ③GX Developer: Correct "Diﬀerences between two programs" referring to "HTML conversion guidance ﬁle". ④GX Works2: Open "Diﬀerences between two programs"(Project - Open "Other data" - Open "Other project") and change the PLC type to High-speed Universal model QCPU. Note 4: For the acquisition of A/QnA -> Q Conversion Support Tool, please contact your local Mitsubishi Electric Corporation representative. Diﬀerences between the two programs ■Can be modiﬁed directly. Prevents mistakes and improves eﬃciency. 〈Image of diﬀerences between the two programs〉 Statement of unconverted devices̶＃ The original device and the converted device are displayed as shown below. The devices contained in the circuit block are displayed one line at a time. #00001 BCDP D9001 → SD1255 (#00001 is a search keyword from the guidance ﬁle.) [Example] Statement of unconverted instructions̶% The original instruction and the converted instruction are displayed as shown below. The instructions contained in the circuit block are displayed one line at a time. ％00000 ASC ABCDEFG D100 → OUT SM1255 (%00000 is a search keyword from the guidance ﬁle.) [Example] Statement of special function module processes̶! For the special function module instructions (FROM, DFRO, TO, DTO and instructions using X/Y devices), a message requesting review is displayed. !00001 SpecialFunctionModuleProcess! Refer to ReviewInformation (!00001 is a search keyword from the guidance ﬁle.) [Example]] 6 Automatic Program Conversion: GX Developer & A/QnA -> Q Conversion Support Tool HTML conversion guidance ﬁle ■Easy comparison of performance speciﬁcations before and after replacement. Detailed information is displayed hierarchically in your web browser. Information on the diﬀerences between the two programs and the conversion guidance ﬁle are linked together. [Example] Special function module processes which need to be reviewed Click "By special function module name" in the "Programs for special function modules necessary in review" row. Display modules' performance comparison 7 Click the recommended module name next to "The recommended modules that can be replaced." ■Details of unconverted special relays and registers can be displayed, improving conversion eﬃciency. [Example] Special relays and registers which are not converted in the Q program Click "Device no. order" in the "Special relay/special register not been converted in PLC type changing" row. Conﬁrm modiﬁed contents 8 For AnS/QnAS Series QA Extension Base Unit ( ) QA1S65B QA1S68B QA1S51B Use existing AnS/QnAS Series modules when upgrading to QCPU. ■Gradual transition from Ans/QnAS Series to Q Series (Q mode). ●Construct a system that is controlled by the new Q Series CPU (Q mode) while keeping the existing AnS/QnAS Series modules mounted to a QA1S□B extension base unit. The AnS/QnAS Series modules can gradually be replaced to fully establish a Q Series system. Existing AnS/QnAS Series Step 1 Q Series QA Extension Base Unit QA1S65B QA1S68B QA1S51B Q Series extension cable Existing AnS/QnAS Series power supply modules, I/O modules, and other modules can be utilized; wiring is left as it is. Step 2 Q Series Entire replacement to Q Series ●Remove the AnS/QnA extension base unit (QA1S□B) when all modules have been replaced with Q Series equivalents. ●The QA1S□B extension base units are compatible with High Performance Model QCPUs and Universal Model QCPUs whose ﬁrst ﬁve-digit serial number is 13102 or later. Basic Model QCPUs, Process CPUs, Redundant CPUs, Safety CPUs and Remote I/O Stations are not compatible. ●Some modules cannot be mounted on the QA1S□B extension base units. For details, see the "QCPU User's Manual (Hardware Design, Maintenance and Inspection) (SH(NA)-080473ENG)". ●No further extensions can be made to QA1S51B as it has not got an Extension Cable Connector. This unit cannot be used in conjunction with QA6□B and QA6ADP with A5□B nor can QA6ADP be used in conjunction with A6□B. 9 ■Reduce conversion eﬀort by using the same I/O addressing. A1SY41P A1SJ61BT11 A1SJ71LP21 A1SX41 3 4 QY41P 4 2 QX41 3 1 QX41 2 0 QJ71LP21-25 1 Q00UCPU 0 A1SX41 A1SHCPU Q35B QJ61BT11N When reusing existing modules with a Q Series CPU, it is not required to change the I/O number of the existing modules. For new module(s) on the main base unit, assign a number after the existing modules in the I/O assignment settings. This can greatly reduce the program modiﬁcation time. Newly added Replaced modules modules (AnS/QnAS to Q Series) 8 9 A1SX41 7 Empty 6 Empty A1SX41 5 A1SY41P QA1S□B extension base unit Replace modules which cannot be mounted with Q Series modules. Note: Assign the I/O numbers in the following order: Q Series to AnS/QnAS Series or AnS/QnAS Series to Q Series. When the order is mixed (i.e., Q Series → AnS/QnAS Series → Q Series), an error will occur in the CPU. Main base unit Model Type Point Address Intelli. 32 100 1 QJ71LP21-25 Intelli. 32 120 0 QJ61BT11N 2 QX41 Input 32 140 3 QX41 Input 32 160 4 QY41P Output 32 180 Extension base unit ■Example of I/O assignment Model Type Point Address 5 A1SX41 Input 32 00 6 A1SY41P Output 32 20 7 Empty 32 40 8 Empty 32 60 9 A1SX41 Input 32 80 10 Q Series Large Type Base Unit (AnS Series size) New Replace to Q Series module reusing existing wiring. ■Q Series large type base unit (AnS Series size) Q Series large type base unit is used to replace AnS series module with Q series, using the existing installation site and cables are utilized. ●Reusing a 16 point terminal block from the existing AnS/QnAS Series module reduces the rewiring work. ●When replacing AnS/QnAS Series module with Q Series using Conversion Adapter(Upgrade tool by Mitsubishi Electric Engineering Co., Ltd.) and the existing AnS/QnAS Series terminal block without rewiring, the width of I/O slot of this base unit is just the same as existing wide-sized AnS/QnAS Series, then the space reduces noise interference from nearby modules.*1 ●The installation position is just the same as AnS/QnAS Series’ s, the installation screw holes can be used to mount Q Series large type base unit. ●Panel mounting type or DIN rail mounting type is available, select the type for your need. *1: To mount the Q Series module on the I/O slot of the Q series large type base unit, always attach the Q series large type blank cover QG69LS (selling separately). [Example] Replacing AnS/QnAS Series module with Q Series module using Conversion adapters and Q Series large type base unit ①Remove the AnS/QnAS Series module along with the base unit, install the Q Series large type base unit in the same position, and mount the Q Series module. (New installation holes are unnecessary when mounting the Q Series large type base unit.) ②Attach the Q Series large type blank cover (AnS Series size) to the Q Series module and mount the Q Series module to the Q Series large type base unit. ③Attach Conversion Adapter(Upgrade tool) to the Q Series module with the Q Series large type base unit. ④Remove the terminal blocks from the existing AnS/QnAS Series module and mount it on the Conversion adapter. (The existing wiring can be used without modiﬁcation.*2) Q Series large type base unit (AnS Series size)*3 New ① Conversion unit or terminal unit of FA goods is also useful to replace AnS/QnAS Series I/O module with Q Series's. QX40 QX40 QX40 QX40 U Q12HCP E MOD RUN . ERR R USE BAT. T BOO ER POW Q62P - - + C 24VD 4mA - + C PULL 24VD 4mA - + USB C 24VD 4mA PULL 2 RS-23 FA goods ② MELSEC-Q Series module ③ New Q Series large type blank cover (AnS series size) QG69LS Y0∼YF Terminal unit - + C 24VD 4mA ＋ − *2: Partial change in wiring for the power supply and common terminals is required. *3: Supplies screw holes for mounting Conversion Adapter with Fixture. Base Adapter(Upgrade tool) by Mitsubishi Electric Engineering Co., Ltd. ＋ DC AC − AC indicator DC indicator ④ Attach directly ■Q Series large type base unit (AnS Series size) list New The products are used to replace with Q Series module using the installation holes of AnS/QnAS Series module. DIN rail mounting type is also available, the width of I/O slot of this base unit is just the same as existing wide-sized AnS/QnAS Series, then the space reduces noise interference from nearby modules.*4 Installation type Panel mounting type 11 Main base unit Q35BLS Q38BLS Extension unit Q65BLS Q68BLS Q55BLS Installation type DIN rail mounting type Main base unit Q35BLS-D Q38BLS-D Extension unit Q65BLS-D Q68BLS-D Q55BLS-D *4: To mount the Q Series module on the I/O slot of the Q series large type base unit, always attach the Q series large type blank cover QG69LS(selling separately). Upgrade Tool/FA Goods （manufactured by Mitsubishi Electric Engineering Co., Ltd.） Replace AnS/QnAS Series module with Q Series without extensive I/O rewiring. ■Upgrade tool The upgrade tool consists of two parts: Conversion Adapter to modify the existing wiring of AnS/QnAS Series input/output/analog/high-speed counter/temperature input modules to the wiring of Q Series modules; and Q Series base adapter mountable through the installation hole of the AnS/QnAS Series base unit. ● FA goods are useful instead if Q Series input/output modules are not available for replacing from AnS/QnAS Series. ■FA goods FA goods are useful for system conﬁguration with the Q Series module. These goods consist Conversion Adapter, interface terminal block, positioning module cable, etc. Module replacement using FA goods instead is executed when the replacement is not available by reasons of the module's speciﬁcation, etc. ■Conversion Adapter list For Input/output module*1(One slot type) Input ／ Output AnS/QnAS Series model Q Series model A1SX10 A1SX10EU A1SY10 Output A1SY10EU A1SX40 A1SX40-S2 A1SX40-S1 Input A1SX80 A1SX80-S1 A1SX80-S2 A1SY22 A1SY40（P） Output A1SY50 A1SY80 Input For Analog module(One slot type) Conversion Adapter model QX10 ERNT-ASQTXY10 QY10 QX40 ERNT-ASQTX40 QX40-S1 QX80 ERNT-ASQTX80 QY22 QY40P QY50 QY80 ERNT-ASQTY22 ERNT-ASQTY40 ERNT-ASQTY50 ERNT-ASQTY80 For Input/output module (Two slots type) New *1 Input ／ Output AnS/QnAS Series model Q Series model A1SX20 Input A1SX20EU A1SY60 Output A1SY60E Input ／ Output ERNT-ASQTX20 QY68A ×2 ERNT-ASQTY60 ERNT-ASQTY60E *1: Partial change in wiring for the power supply and common terminals is required. *2: Conversion Adapter Fixture is attached. This Fixture is for ﬁxing Conversion Adapter to Base Adapter or Conversion Adapter DIN rail mounting bracket. Q Series model A1S64AD Input A1S68AD (Voltage input) A1S68AD (Current input) A1S68AD A1S62DA Output A1S68DAV A1S68DAI I/O A1S63ADA Q64AD Q68ADV Q68ADI Q68AD-G Q62DAN Q68DAVN Q68DAIN Q64AD2DA Conversion Adapter model ERNT-ASQT64AD ERNT-ASQT68AD ERNT-ASQT68AD-G※2 ERNT-ASQT62DA New ERNT-ASQT68DA ERNT-ASQT63ADA New For High-speed counter module(One slot type) New Input ／ Output AnS/QnAS Series model A1SD61 Input Conversion Adapter model QX28 ×2 AnS/QnAS Series model A1SD62 A1SD62E A1SD62D Q Series model QD62 QD62-H01 QD62-H02 QD62 QD62E QD62D Conversion Adapter model ERNT-ASQTD61※2 ERNT-ASQTD62※2 ERNT-ASQTD62D※2 For Temperature input module(One slot type) New Input ／ Output Input AnS/QnAS Series model A1S68TD A1S62RD3(N) A1S62RD4(N) Q Series model Conversion Adapter model Q68TD-G-H01 Q68TD-G-H02 ERNT-ASQT68TD-H01※2 ERNT-ASQT68TD-H02※2 Q64RD ERNT-ASQT62RD ■Base Adapter list New The products are used to mount Q Series base unit using the existing AnS/QnAS Series installation screw holes. For main base units*1 AnS/QnAS Series model A1S38B/A1S38HB A1S35B A1S33B A1SJCPU A1SJCPU-S3 A1SJHCPU Q Series model Base Adapter model Q38B Q35B Q33B ERNT-ASQB38N ERNT-ASQB35N ERNT-ASQB33N Q00JCPU Q00UJCPU ERNT-ASQB00JN Installation with Base Adapter MELSEC-Q Series MELSEC-Q Series module base unit Base Adapter*4 For extension base units*3 AnS/QnAS Series model A1S68B A1S65B A1S55B Q Series model Q68B Q65B Q55B Base Adapter model ERNT-ASQB68N ERNT-ASQB65N ERNT-ASQB55N *3:The conventional Base Adapters are available when not using Conversion Adapter with Fixture. Fixture *4: Supplies the installation screw hole to mount Fixture. Conversion Adapter (with Fixture) 12 Upgrade Tool/FA Goods （manufactured by Mitsubishi Electric Engineering Co., Ltd.） ■Conversion Adapter DIN rail mounting bracket list New Mounting Brackets for Conversion Adapter with Fixture while mounting the MELSEC-Q Series base unit to DIN rail. Main base / Extension AnS/QnAS Series model Q Series model Main base Extension Main base Extension A1S38B/A1S38HB A1S68B A1S35B A1S65B A1SJCPU A1SJCPU-S3 Main base A1SJHCPU A1S33B Extension A1S55B Q38B Q68B Q35B Q65B Q00JCPU Q00UJCPU Q33B Q55B Mounting Bracket model Installation with DIN rail MELSEC-Q Series Base Unit ERNT-ASQDIN3868 MELSEC-Q Series module DIN rail ERNT-ASQDIN356500J Conversion Adapter DIN rail mounting bracket*1 ERNT-ASQDIN3355 Note: A Q6DIN1, Q6DIN2 or Q6DIN3 Adapter for the DIN rail installation (manufactured by Mitsubishi Electric Corporation) is also required while mounting MELSEC-Q Series base unit with Conversion Adapter DIN rail mounting bracket to DIN rail. Fixture *1: provides the installation screw hole for mounting Fixture. Conversion Adapter (with Fixture) ■Instructions ●Check mounting conditions before using the upgrade tool, as the module width (34.5mm→27.4mm) and wiring space is decreased. AnS/QnAS Series module Q Series module ●If the cables still interfere, leave an empty slot between modules to secure wiring space. (Ex.) For Q38B 0 POWER MODE RUN ERR. USER BAT. BOOT OUT PULL PULL USB RS-232 1 2 3 4 5 6 7 0 0 0 0 1 1 1 1 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 6 6 6 6 7 7 7 7 8 8 8 8 9 9 9 A A A B B B C C C C D D D D E E E E F F F F 9 A B 27.4 34.5 ●If cables interfere with the module, lift up the cables to the front to avoid interference. Lift up the cables to the front to avoid interference. Front Existing cables of AnS/QnAS Series AnS/QnAS Series terminal block Conversion adapter CPU module Power supply module Back Input/output/analog high-speed counter/ temperature module If slots are insuﬃcient, add an extension base unit. ●Replace a terminal block cover with the one included with a conversion adapter. For detailed speciﬁcations, precautions, and restrictions of the upgrade tool, please refer to the brochure (NA C088E-116 published by Mitsubishi Electric Engineering Co., Ltd.) and user's manual. For the upgrade tool, please contact your local Mitsubishi sales oﬃce or representative. 13 A2C Shape CC-Link Remote I/O Module Replace A2CCPU and NET/MINI-S3 I/O modules with CC-Link using existing NET/MINI-S3 wiring. ■The simple replacement process helps minimize the upgrade time. The installation size is the same as that of A2C I/O modules; existing terminal block can be mounted directly. After replacing the module, mount the wired terminal block.*1 Remove the wired terminal block from the existing I/O module. *1：The communication cables and power cables need to be rewired. ■Model list Discontinued model Alternative model Model AX41C AX81C AJ65DBTB1-32D AY51C AJ65DBTB1-32T1 AX40Y50C AJ65DBTB1-32DT1 AY13C AJ65DBTB1-32R AX40Y10C AX80Y10C AJ65DBTB1-32DR Outline Terminal block type, 24 V DC input, 32 points, positive/negative common shared Terminal block type, 0.5 A transistor output, 32 points, sink Terminal block type, 24 V DC input, 16 points; 0.5 A transistor output, 16 points, I/O composite module Terminal block type, relay output, 32 points Terminal block type, 24 V DC input, 16 points; relay output, 16 points, I/O composite module 14 12 MELSECNET/MINI-S3 I/O Module Wiring Conversion Adapter Replace NET/MINI-S3 systems with CC-Link while reusing existing NET/MINI-S3 wiring. ■Wiring adapter terminal blocks eliminate the need to rewire. (Example) Replacing AJ35TB2-16D with AJ65BTB2-16D using a wiring conversion adapter A6ADP-2MC16D 【Before replacement】 【After replacement】 MELSECNET/MINI-S3 input modules (AJ35TB2-16D) Replace with the CC-Link I/O module (AJ65BTB2-16D) Wiring conversion adapter Remove the terminal block of the CC-Link I/O module, and then install the conversion adapter. Rewire the CC-Link cables and power cables only. No modiﬁcation is necessary for I/O wiring since the existing terminal block of the MELSECNET/MINI-S3 I/O module can be used. ■Model list Alternative model Discontinued model Product name Model Model Alternative module AJ35TB1-16D AJ65BTB1-16D Wiring conversion adapter for 26-point terminal block*1 A6ADP-1MC16D AJ35TB2-16D AJ65BTB2-16D Wiring conversion adapter for 34-point terminal block*1 A6ADP-2MC16D Output module AJ35TB1-16T AJ65BTB1-16T Wiring conversion adapter for 26-point terminal block*1, *2 A6ADP-1MC16T Input module 15 Conversion adapter Remarks (restrictions) *1: The overall size is increased due to addition of the adapter to the alternative module. *2: Additional wiring to CTL+ (External power supply for output) is required. Modules for Easy Replacement A variety of modules are available to facilitate replacement. ■DC input modules compatible with 6mA rated input current (ＱＸ４１-Ｓ２, ＱＸ８１-Ｓ２) Use modules that have a high rated input current and are compatible with proximity sensor inputs. Common type AnS/QnAS Series Q Series A1SX41*1 Positive common A1SX41-S2 A1SX42*2，*3 QX41-S2 A1SX42-S2*3 Negative common A1SX81*1 A1SX81-S2 QX81-S2 *1：Use QX71 when 12VDC is selected. *2：Use QX72 when 12VDC is selected. *3：Use two QX41-S2s when using more than 32 points. ■Temperature control module (Q64TCTTN, Q64TCRTN, Q64TCTTBWN, Q64TCRTBWN) Temperature control module can be replaced without changing the existing temperature sensor. Temperature sensor AnS/QnAS Series Q Series A1S64TCTT-S1 Thermocouple A1S62TCTT-S2 Q64TCTTN A1S64TCTRT A1S64TCRT-S1 Platinum resistance thermometers A1S62TCRT-S2 Q64TCRTN A1S64TCTRT Thermocouple (Heater disconnection detection function) Platinum resistance thermometers (Heater disconnection detection function) A1S64TCTTBW-S1 A1S62TCTTBW-S2 Q64TCTTBWN A1S64TCTRTBW A1S64TCRTBW-S1 A1S62TCRTBW-S2 Q64TCRTBWN A1S64TCTRTBW ■High-speed counter modules (ＱＤ６２-Ｈ０１, ＱＤ６２-Ｈ０２) Modules can be replaced with no spec restrictions of the existing pulse generators (e.g. encoders etc.). Counting speed AnS/QnAS Series Q Series 50KPPS 10KPPS A1SD61 QD62-H01 QD62-H02 * QD62-H01/H02 have 16 occupied I/O points. To utilize the programs before module replacement, set the same start numbers of I/O signal to the modules mounted to the right of the replaced high-speed counter module. * The“limit switch output function”of A1SD61 can be substituted for the“coincidence output function”of QD62-H01/H02. ■Positioning module(QD73A1) The positioning module realizes servomotor control with a high-resolution encoder, and is compatible with a 1 Mpps maximum input pulse (x10 conventional module). Replace the positioning module while maintaining existing external devices such as the servo ampliﬁers. Positioning mode Position control mode Velocity/position control switchover mode AnS/QnAS Series Q Series A1SD70 QD73A1 16 MELSECNET/H Network Module Utilize the existing network cables to build MELSECNET/H network systems. ■MELSECNET/H Network Module (twisted bus type) Existing MELSECNET/B twisted pair cables are used to build the MELSECNET/H network system when replacing AnS/QnAS A Series modules (MELSECNET/B) with Q Series modules. Modules are replaced without modifying the previously laid network cables. A high-speed and large-volume network system can also be built using CC-Link cables. Control station Normal station Terminating resistor Normal station Normal station Normal station Normal station Terminating resistor Utilize existing MELSECNET/B twisted pair cables ●Model list Model Outline QJ71NT11B MELSECNET/H Network Module (twisted bus type) ■MELSECNET/H Network Module (optical loop type, coaxial bus type) Step-by-step transition from the existing AnS/QnAS modules with MELSECNET/10 network system to Q Series with MELSECNET/H(10) network system. The transition for both of PLC to PLC network system and Remote I/O network system is completely executed with the step-by-step replacement from AnS/QnAS Series modules to Q Series modules. A1 A2 A1 MELSECNET /10 A3 A5 Q2 A4 MELSECNET /10 Q3 【Before transition】 Q1 Q2 A4 MELSECNET /H（10） Q3 【Transitional step】 Step-by-step replacement from AnS/QnAS modules to Q Series An AnS/QnAS Series ●Model list (for Remote I/O network) AnS/QnAS Series models AnS/QnAS Series models Q Series replacement model A1SJ71LP21 A1SJ71QLP21 QJ71LP21-25 A1SJ71QLP21S QJ71LP21S QJ71BR11 ※2 ※2 ※2 Q5 Q4 【Transition completed】 ●Model list (for PLC to PLC network, Remote I/O network) A1SJ71BR11 A1SJ71QBR11 A1SJ71LR21 ※1 A1SJ71QLR21 ※1 17 A5 Qn Q Series Q Series replacement model A1SJ72QLP25 QJ72LP25-25 A1SJ72QBR15 QJ72BR15 A1SJ72QLR25 ※1 ※3 ※3 QJ72BR15 *1: The collective replacement from coaxial loop type of MELSECNET/H network system to coaxial bus type. This module isn't compatible with MELSECNET/H coaxial bus type system, therefore the step-by-step replacement is not available. *2: All remote I/O stations should be replaced to Q Series modules when replacing remote I/O network system. Q Series master station and AnS/QnAS Series remote I/O stations cannot be mixed on the same remote I/O network system. *3: AnS/QnAS Series and Q Series modules can be mixed on the same network, please use this product whose ﬁrst 5-digit serial number is 15012 or later. New MELSECNET/10 Network Modules (Production continues) Replace MELSECNET(II) systems to Q Series MELSECNET/H(10) systems useing existing wiring. ■Step-by-step transition from AnS/QnAS and Q Series combined system to Q Series system. Further network upgrade options are available because of the continued production of MELSECNET/10 modules. A complete MELSECNET(Ⅱ) system can be replaced with MELSECNET/10 while reusing the existing cable installations. Following the network replacement, the AnS/QnAS Series stations can be replaced with Q Series stations as needed in a step-by-step manner. However, the step-by-step transition is not possible if the network includes of a combination of AnS/QnAS Series and Q Series stations, because AnS/QnAS Series does not support MELSECNET/H twisted bus system. A1 A2 A1 MELSECNET （Ⅱ） A3 A5 A2 【Before transition】 MELSECNET /10 A3 A4 Q1 A5 A2 A4 【Transitional step 1】 Replace MELSECNET(Ⅱ) data link modules at all stations with MELSECNET/10 network modules, and then switch the network system over to MELSECNET/10. ・Change the MELSECNET(Ⅱ) master station to the MELSECNET/10 control station. Note: For CPU modules (AnSCPU) that cannot be set as the MELSECNET/10 control stations, please consider changing to the Q Series. ・Set the MELSECNET(Ⅱ) local stations to the MELSECNET/10 normal stations. MELSECNET /10 Q3 (One or more AnASCPU or QnASCPU modules are required as a control station.) Q1 A5 Q2 A4 MELSECNET /H(10) Q3 【Transitional step 2】 Q5 Q4 【Transition completed】 An AnS/QnAS Series Qn Q Series For stations that are to be changed from AnS/QnAS Series systems to Q Series systems, replace the programmable controllers to Q Series, and set them as MELSECNET/10 normal stations. By gradually transferring the AnS/QnAS Series systems to the Q Series systems, you will be able to complete the transition to the Q Series system. ■Network module options Product name MELSECNET/10 network module Model Control/normal station A1SJ71LP21 A1SJ71BR11 A1SJ71QLP21 A1SJ71QBR11 Remote I/O station − 18 MELSECNET(Ⅱ)-MELSECNET/10 Gateway Set (Q6KT-NETGW-□□) Implement gradual migration from MELSECNET(Ⅱ) to MELSECNET/10. ■Use a Q2AS based MELSECNET(Ⅱ)/10 gateway to gradually convert MELSECNET(Ⅱ) stations to MELSECNET/10. MELSECNET/10 is backwards compatible with Q Series via MELSECNET/H. [Example] Partial replacement of MELSECNET(Ⅱ), from AnS/QnAS Series network modules to Q Series network modules Gateway set Q Series 0 1 2 3 4 5 6 7 8 9 A B C D E F NET(Ⅱ) NET/10 Local Control station station 0 1 2 3 4 5 6 7 8 9 A B C D E F 0 1 2 3 4 5 6 7 8 9 A B C D E F NET/10 Normal station MELSECNET/10 MELSECNET(Ⅱ) Step-by-step replacement with Q Series A1 A2 A1 MELSECNET (Ⅱ) A3 A5 A4 【Before transition】 A2 Use a gateway to incorporate the Q Series system into the existing system. Q1 Q5 Q2 MELSEC MELSEC NET Gateway NET (Ⅱ) /10 A3 Please check the cautions and restrictions for the gateway station network parameters etc. in the related manuals. Q3 Q4 【Transitional step】 MELSECNET /H(10) Q5 Q4 Step-by-step replacement for the 【Transition completed】 entire system conversion to Q Series. An AnS/QnAS Series Qn Q Series ■Gateway set options Set model name Main part MELSECNET(Ⅱ)/B part MELSECNET/10 part A1SJ71AP21 A1SJ71QLP21 Q6KT-NETGW-SS Q6KT-NETGW-RS Q6KT-NETGW-RB A1S35B A1S61PN Q2ASCPU Q6KT-NETGW-TS A1SJ71AT21B Q6KT-NETGW-TB Reading the model name 19 Q6KT-NETGW-□□ Gateway set A1SJ71AR21 Network type：MELSECNET（Ⅱ） Ｓ：SI optical ﬁber cable (double loop) Ｒ：Coaxial cable (double loop) Ｔ ：Twisted pair cable (bus) A1SJ71QLP21 A1SJ71QBR11 A1SJ71QLP21 A1SJ71QBR11 Network type：MELSECNET/10 Ｓ：SI optical ﬁber cable (double loop) Ｂ：Coaxial cable (bus) MELSECNET(Ⅱ), MELSECNET/B Local Station Data Link Module （ A1SJ71AP23Q A1SJ71AR23Q A1SJ71AT23BQ ） Upgraded AnS local station data link modules permit a direct Q Series connection to existing networks as local stations. ■Replace AnS/QnAS Series MELSECNET(Ⅱ), MELSECNET/B stations with Q Series systems. The MELSECNET(Ⅱ)/B local station data link modules allow a Q Series system to directly connect to existing NET(Ⅱ)/NET/B data link system via a QA1S□B extension base unit. [Example] MELSECNET(Ⅱ) conﬁguration incorporating Q Series High performance model QCPU 0 1 2 3 4 5 6 7 8 9 A B C D E F 0 1 2 3 4 5 6 7 8 9 A B C D E F 0 1 2 3 4 5 6 7 8 9 A B C D E F Master station 0 1 2 3 4 5 6 7 8 9 A B C D E F MELSECNET(Ⅱ) Extension base unit with 1 slot (power supply module not required) Local station Local station QA1S51B *1 QA1S65B QA1S68B MELSECNET(Ⅱ) Local station data link module *1: No further extensions can be made to QA1S51B as it has not got an Extension Cable Connector. This unit cannot be used in conjunction with QA6□B and QA6ADP with A5□B nor can QA6ADP be used in conjunction with A6□B. ■Local station data link module options Model Outline A1SJ71AP23Q MELSECNET(Ⅱ) local station data link module for SI optical ﬁber cable A1SJ71AR23Q MELSECNET(Ⅱ) local station data link module for coaxial cable A1SJ71AT23BQ MELSECNET/B local station data link module for shielded twisted pair cable ●Speciﬁcations Supported CPUs High Performance Model QCPUs [Q02(H), Q06H, Q12H, and Q25HCPU] and Universal Model QCPUs whose ﬁrst ﬁve digits of the serial number are 13102 or later. Compatible extension base units QA1S□B or QA□B with A-A1S module conversion adapter (A1ADP-SP) Number of modules per CPU Send point range can be further increased by mounting up to 6 modules per CPU. Network parameters Minimal setup required, as network parameters settings are automatically detected by the module. Link refresh setting Link refresh setting is not automatically detected. Hence, FROM/TO instructions within sequence program to enable send/receive cyclic data are required. Sample programs for link refresh are provided in "A/QnA -> Q Conversion Support Tool". The sample program can be used to create a QCPU program which may reduce development time. For details, please contact your local Mitsubishi sales oﬃce or representative. 20 Product List List of products used for upgrade Extension base unit Product name QA(QnA Series) extension base unit Outline Model QA1S65B 5 slots, for AnS Series modules QA1S68B 8 slots, for AnS Series modules QA1S51B 1 slot, for AnS Series modules (power supply module not required) Q Series large type base unit (AnS Series size) Product name Main base unit Extension base unit New Outline Model Q35BLS 5 slots, for mounting Q Series module, panel mounting type Q38BLS 8 slots, for mounting Q Series module, panel mounting type Q35BLS-D 5 slots, for mounting Q Series module, DIN rail mounting type Q38BLS-D 8 slots, for mounting Q Series module, DIN rail mounting type Q65BLS 5 slots, for mounting Q Series module, panel mounting type Q68BLS 8 slots, for mounting Q Series module, panel mounting type Q65BLS-D 5 slots, for mounting Q Series module, DIN rail mounting type Q68BLS-D 8 slots, for mounting Q Series module, DIN rail mounting type Q55BLS 5 slots, for mounting Q Series module, panel mounting type, non-requires power supply module Q55BLS-D 5 slots, for mounting Q Series module, DIN rail mounting type, non-requires power supply module Q series large type blank QG69LS cover (AnS series size) Blank cover for the Q Series module on the Q Series large type base unit (AnS Series size) A2C shape CC-Link remote I/O module Product name CC-Link remote I/O module (Screw/2-piece terminal block, dustproof type) Model Outline AJ65DBTB1-32D Input: 32 points, 24 V DC (positive/negative common [sink/source]), terminal block 1-wire type, response time: 10 ms AJ65DBTB1-32T1 Output: 32 points, 12/24 V DC, 0.5 A transistor output (sink), terminal block 1-wire type (low leakage current type) AJ65DBTB1-32R Output: 32 points, 24 V DC/240 V AC, 2 A relay output, terminal block 1-wire type AJ65DBTB1-32DT1 Input: 16 points, 24 V DC (positive common [sink]), 1-wire type, response time: 10 ms Output: 16 points, 24 V DC, 0.5 A transistor output (sink), terminal block 1-wire type (low leakage current type) AJ65DBTB1-32DR Input: 16 points, 24 V DC (positive/negative common [sink/source]), response time: 10 ms Output: 16 points, 24 V DC/240 V AC, 2 A relay output, terminal block 1-wire type MELSECNET/MINI-S3-CC-Link wiring conversion adapter Product name MELSECNET/ MINI-S3-CC-Link wiring conversion adapter 21 Model Outline A6ADP-1MC16D 26-point wiring conversion adaptor, 1-wire type 16-point input Wire conversion adaptor for mounting CC-Link module A6ADP-2MC16D 34-point wiring conversion adaptor, 2-wire type 16-point input Wire conversion adaptor for mounting CC-Link module A6ADP-1MC16T 26-point wiring conversion adaptor, 1-wire type 16-point output (with CTL+terminal) Wire conversion adaptor for mounting CC-Link module DC input module Product name Model Outline QX41-S2 32 points, 24 V DC, rated input current: approximately 6 mA, positive common type, 32 points/common, response time: 1 ms/5 ms/10 ms/20 ms/70 ms or less (Set by the CPU parameter at the initial setting of 10 ms for both ON to OFF and OFF to ON) QX81-S2 32 points, 24 V DC, rated input current: approximately 6 mA, negative common type, 32 points/common, response time: 1 ms/5 ms/10 ms/20 ms/70 ms or less (Set by the CPU parameter at the initial setting of 10 ms for both ON to OFF and OFF to ON) DC input module Temperature control module Product name Model Outline Q64TCRTN 4 channels, platinum resistance thermometers (Pt100, JPt100) No heater disconnection detection function Sampling cycle: 0.5s/4CH, 18-point terminal block Q64TCRTBWN 4 channels, platinum resistance thermometers (Pt100, JPt100) Heater disconnection detection function Sampling cycle: 0.5s/4CH, 18-point terminal block × 2 Q64TCTTN 4 channels, thermocouple (K, J, T, B, S, E, R, N, U, L, PL2, W5Re/W26Re) No heater disconnection detection function Sampling cycle: 0.5s/4CH, 18-point terminal block Q64TCTTBWN 4 channels, thermocouple (K, J, T, B, S, E, R, N, U, L, PL2, W5Re/W26Re) Heater disconnection detection function Sampling cycle: 0.5s/4CH, 18-point terminal block × 2 Temperature control module High-speed counter module Product name High-speed counter module Model Outline QD62-H01 Replacement module with the same input filtering system and counting speed as A1SD61 (50KPPS) QD62-H02 Replacement module with the same input filtering system and counting speed as A1SD61 (10KPPS). Positioning module Product name Positioning module Model QD73A1 Outline 1-axis analog output type Position control mode (positioning control, two-phase trapezoidal positioning control) Speed/position control switchover mode MELSECNET/H twisted bus type network module Product name Model MELSECNET/H twisted bus type network module QJ71NT11B Outline MELSECNET/H twisted pair cable, single bus, for control/normal station 22 Product List MELSECNET(Ⅱ), MELSECNET/B local station data link module Product name MELSECNET(Ⅱ) local station data link module MELSECNET/B local station data link module Model Outline A1SJ71AP23Q MELSECNET （Ⅱ）local station data link module for SI optical fiber cable A1SJ71AR23Q MELSECNET （Ⅱ）local station data link module for coaxial cable A1SJ71AT23BQ MELSECNET/B local station data link module for shielded twisted pair cable MELSECNET(Ⅱ)-MELSECNET/10 gataway set Product name 23 Model Outline MELSECNET(Ⅱ)MELSECNET/10 gateway set Q6KT-NETGW-SS A set of A1S35B, A1S61PN, Q2ASCPU, A1SJ71AP21, and A1SJ71QLP21 Q6KT-NETGW-RS A set of A1S35B, A1S61PN, Q2ASCPU, A1SJ71AR21, and A1SJ71QLP21 Q6KT-NETGW-RB A set of A1S35B, A1S61PN, Q2ASCPU, A1SJ71AR21, and A1SJ71QBR11 MELSECNET/BMELSECNET/10 gateway set Q6KT-NETGW-TS A set of A1S35B, A1S61PN, Q2ASCPU, A1SJ71AT21B, and A1SJ71QLP21 Q6KT-NETGW-TB A set of A1S35B, A1S61PN, Q2ASCPU, A1SJ71AT21B, and A1SJ71QBR11 Models in continuous production Power supply module Product name Power supply module Battery Product name Model A6BAT A8BAT A10BAT Battery Memory card Model A1S61PN A1S63P Product name Memory card Model Q1MEM-64S Q1MEM-128S Q1MEM-256S Q1MEM-512S Q1MEM-1MS Q1MEM-2MS Q1MEM-64SE Q1MEM-128SE Q1MEM-256SE Q1MEM-512SE Q1MEM-1MSE MELSECNET/10 network module Product name Model A1SJ71LP21 A1SJ71BR11 A1SJ71QLP21 A1SJ71QBR11 MELSECNET/10 network module CC-Link master/local module Product name Model A1SJ61BT11 A1SJ61QBT11 CC-Link master/local module A-A1S module conversion adapter Product name A-A1S module conversion adapter Model A1ADP-XY A1ADP-SP 24 Product List Discontinued products Discontinued products Date of discontinuation Small type AnS Series Small type QnAS Series ●CPU module ●Power supply module(several modules) ●Base unit ●I/O module ●Special function module ●Network module ●Other related products(made-to-order based on AnS/QnAS Series to be discontinued) End of Sep. 2014 I/OLINK ●Master module ●Remote I/O module End of Sep. 2014 Service availability period 2013 Schedule for products discontinued 2014 2015 2016 2017 2018 2019 2020 2021 2022 Service availability period (7 years) Production discontinued (Sep. 2014) End of service (Sep. 2021) For the details of models in continuous production and the service availability period of discontinued products, refer to the Technical bulletin (FA-A-0142). 25 2023 2024 Responding to the amenable running of FA systems through an enhanced support system Global FA Centers "Mitsubishi Electric Global FA centers" have been established in various countries around the world to cover the Americas, Europe, and Asia. FA centers help to ensure compliance with the certifications and regulations of different regions, initiate product development in response to local demands, and provide full-time, professional customer service. North American FA Center Russian FA Center Taiwan FA Center （Taipei） Brazil FA Center Korean FA Center Taiwan FA Center （Taichung） European FA Center Shanghai FA Center ASEAN FA Center German FA Center Tianjin FA Center India FA Center UK FA Center Beijing FA Center Thailand FA Center Czech republic FA Center Guangzhou FA Center Mitsubishi Electric Automation, Inc. 500 Corporate Woods Parkway, Vernon Hills, IL 60061, USA Tel: +1-847-478-2100 / Fax: +1-847-478-2253 Area covered: North America, Mexico, Chile, Brazil MELCO-TEC Representacao Comercial e Assessoria Tecnica Ltda. Rua Jussara, 1750 - Bloco B- Sala 01 Jardim Santa Cecília- CEP 06465-070, Barueri, São Paulo, Brazil Tel: +55-11-4689-3000 / Fax: +55-11-4689-3016 Area covered: Brazil Mitsubishi Electric Europe B.V. Polish Branch 32-083 Balice ul. Krakowska 50, Poland Tel: +48-12-630-47-00 / Fax: +48-12-630-47-01 Area covered: Central and Eastern Europe Mitsubishi Electric Europe B.V. German Branch Gothaer Strasse 8, D-40880 Ratingen, Germany Tel: +49-2102-486-0 / Fax: +49-2102-486-1120 Area covered: Mainly Western Europe Mitsubishi Electric Europe B.V. UK Branch Travellers Lane, Hatfield, Hertfordshire, AL10 8XB, UK. Tel: +44-1707-28-8780 / Fax: +44-1707-27-8695 Area covered: UK, Ireland Mitsubishi Electric Europe B.V. Czech Branch Avenir Business Park, Radicka 751/113e, 158 00 Praha5, Czech Republic Tel: +420-251-551-470 / Fax: +420-251-551-471 Area covered: Czech,Slovakia Mitsubishi Electric Europe B.V. Russian Branch St.Petersburg office Piskarevsky pr. 2, bld 2, lit "Sch", BC "Benua", office 720; 195027, St. Petersburg, Russia Tel: +7-812-633-3497 / Fax: +7-812-633-3499 Area covered: Russia Mitsubishi Electric Automation Korea Co., Ltd. 3F, 1480-6, Gayang-Dong, Gangseo-Gu, Seoul, 157-200, Korea Tel: +82-2-3660-9530 / Fax: +82-2-3664-8372 Area covered: Korea Mitsubishi Electric Automaiton (China) Ltd. 10F, Mitsubishi Electric Automation Center, No.1386 Hongqiao Road, Changning District, Shanghai, China Tel: 86-21-2322-3030 / Fax: 86-21-2322-3000 Area covered: China Mitsubishi Electric Automation (CHINA) Ltd. Tianjin Office Unit 2003, Tianjin City Tower, No.35, You Yi Road, Hexi District, Tianjin, China Tel: +86-22-2813-1015 / Fax: +86-22-2813-1017 Area covered: China Mitsubishi Electric Automation (CHINA) Ltd. Beijing Office Unit 908, Office Tower 1, Henderson Centre, 18 Jianguomennei Avenue, Dongcheng District, Beijing, China Tel: +86-10-6518-8830 / Fax: +86-10-6518-3907 Area covered: China Setsuyo Enterprise Co., Ltd. 6F., No.105, Wugong 3rd Road, Wugu District, New Taipei City 24889, Taiwan, R.O.C. Tel: +886-2-2299-2499 / Fax: +886-2-2299-2509 Area covered: Taiwan Mitsubishi Electric Taiwan Co., Ltd. No.8-1.Industrial 16th Road,Taichung Industrial Park, Taichung, Taiwan 407, R.O.C. Tel: +886-(0)4-2359-0688 / Fax: +886-(0)4-2359-0689 Area covered: Taiwan Mitsubishi Electric Asia Pte. Ltd. ASEAN Factory Automation Centre 307 Alexandra Road #05-01/02, Mitsubishi Electric Bulding, Singapore Tel: +65-6470-2480 / Fax: +65-6476-7439 Area covered: Southeast Asia, India Mitsubishi Electric India Pvt. Ltd. India Factory Automation Centre Emerald House, EL-3, J Block, M.I.D.C., Bhosari, Pune, 411026, Maharastra State, India Tel: +91-20-2710-2000 / Fax: +91-20-2710-2100 Area covered: India Mitsubishi Electric Automation (Thailand) Co., Ltd. Bang-Chan Industrial Estate No.111 Soi Serithai 54, T.Kannayao, A.Kannayao, Bangkok 10230 Thailand Tel: +66-2906-3238 / Fax: +66-2906-3239 Area covered: Thailand Mitsubishi Electric Automation (CHINA) Ltd. Guangzhou Office Rm.1609, North Tower, The Hub Center, No.1068, Xin Gang East Road, Haizhu District, Guangzhou, China Tel: +86-20-8923-6730 / Fax: +86-20-8923-6715 Area covered: China 26 Mitsubishi Programmable Controllers MELSEC-AnS/QnAS (Small Type) Series Transition Guide Precautions before use This publication explains the typical features and functions of the products herein and does not provide restrictions and other information related to usage and module combinations. Before using the products, always read the product user manuals. Mitsubishi Electric will not be held liable for damage caused by factors found not to be the cause of Mitsubishi Electric; opportunity loss or lost profits caused by faults in Mitsubishi Electric products; damage, secondary damage, or accident compensation, whether foreseeable or not, caused by special factors; damage to products other than Mitsubishi Electric products; and to other duties. To use the products given in this publication properly, always read the relevant manuals before use. The products have been manufactured as general-purpose parts for general industries, and have not been designed or manufactured to be incorporated in a device or system used in purposes related to human life. Before using the products for special purposes such as nuclear power, electric power, aerospace, medicine or passenger movement vehicles, consult with Mitsubishi. The products have been manufactured under strict quality control. However, when installing the products where major accidents or losses could occur if the products fail, install appropriate backup or fail-safe functions in the system. Country/Region Sales office Tel/Fax USA Mitsubishi Electric Automation lnc. 500 Corporate Woods Parkway, Vernon Hills, IL 60061, USA Tel : +1-847-478-2100 Fax : +1-847-478-2253 Brazil Mitsubishi Electric Do Brasil Comercio E Servicos Ltda. Rua Jussara, 1750 - Bloco B- Sala 01 Jardim Santa Cecília- CEP 06465-070, Barueri, São Paulo, Brazil Tel : +55-11-4689-3000 Fax : +55-11-4689-3016 Germany Mitsubishi Electric Europe B.V. German Branch Gothaer Strasse 8, D-40880 Ratingen, Germany Tel : +49-2102-486-0 Fax : +49-2102-486-1120 UK Mitsubishi Electric Europe B.V. UK Branch Travellers Lane, Hatfield, Hertfordshire, AL10 8XB, UK. Tel : +44-1707-28-8780 Fax : +44-1707-27-8695 Italy Mitsubishi Electric Europe B.V. Italian Branch Viale Colleoni 7-20864 Agrate Brianza (Milano), Italy Tel : +39-039-60531 Fax : +39-039-6053-312 Spain Mitsubishi Electric Europe B.V. Spanish Branch Carretera de Rubi 76-80.AC.420, E-08190 Sant Cugat del Valles (Barcelona), Spain Tel : +34-93-565-3131 Fax : +34-93-589-1579 France Mitsubishi Electric Europe B.V. French Branch 25, Boulevard des Bouvets, F-92741 Nanterre Cedex, France Tel : +33-1-5568-5568 Fax : +33-1-5568-5757 Czech Republic Mitsubishi Electric Europe B.V. Czech Branch Avenir Business Park, Radicka 751/113e, 158 00 Praha5, Czech Republic Tel : +420-251-551-470 Fax : +420-251-551-471 Poland Mitsubishi Electric Europe B.V. Polish Branch 32-083 Balice ul. Krakowska 50, Poland Tel : +48-12-630-47-00 Fax : +48-12-630-47-01 Russia Mitsubishi Electric Europe B.V. Russian Branch St.Petersburg office Piskarevsky pr. 2, bld 2, lit "Sch", BC "Benua", office 720; 195027, St. Petersburg, Russia Tel : +7-812-633-3497 Fax : +7-812-633-3499 South Africa CBI-Electric. Private Bag 2016, ZA-1600 Isando, South Africa Tel : +27-11-977-0770 Fax : +27-11-977-0761 China Mitsubishi Electric Automaiton (China) Ltd. 10F, Mitsubishi Electric Automation Center, No.1386 Hongqiao Road, Changning District, Shanghai, China Tel : +86-21-2322-3030 Fax : +86-21-2322-3000 Taiwan Setsuyo Enterprise Co., Ltd. Tel : +886-2-2299-2499 6F., No.105, Wugong 3rd Road, Wugu District, New Taipei City 24889, Taiwan, R.O.C. Fax : +886-2-2299-2509 Korea Mitsubishi Electric Automation Korea Co., Ltd. 3F, 1480-6, Gayang-Dong, Gangseo-Gu, Seoul, 157-200, Korea Tel : +82-2-3660-9530 Fax : +82-2-3664-8372 Singapore Mitsubishi Electric Asia Pte, Ltd. Industrial Division 307, Alexandra Road, Mitsubishi Electric Building, Singapore, 159943 Tel : +65-6470-2308 Fax : +65-6476-7439 Thailand Mitsubishi Electric Automation (Thailand) Co., Ltd. Bang-Chan Industrial Estate No.111 Soi Serithai 54, T.Kannayao, A.Kannayao, Bangkok 10230 Thailand Tel : +66-2906-3238 Fax : +66-2906-3239 Indonesia P.T. Autoteknindo Sumber Makmur Tel : +62-21-663-0833 Muara Karang Selatan, Block A/Utara No.1 Kav. Fax : +62-21-663-0832 No.11, Kawasan Industri Pergudangan, Jakarta-Utara 14440, P.O, Box 5045, Indonesia India Mitsubishi Electric India Pvt. Ltd. Emerald House, EL-3, J Block, M.I.D.C., Bhosari, Pune, 411026, Maharastra State, India Tel : +91-20-2710-2000 Fax : +91-20-2710-2100 Australia Mitsubishi Electric Australia Pty.Ltd. 348 Victoria Road PO BOX11, Rydalmere, N.S.W 2116, Australia Tel : +61-2-9684-7777 Fax : +61-2-9684-7245 HEAD OFFICE: TOKYO BUILDING, 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN NAGOYA WORKS: 1-14, YADA-MINAMI 5, HIGASHI-KU, NAGOYA, JAPAN L(NA)08236E-C 1302(MDOC) New publication, effective Feb. 2013. Specifications are subject to change without notice.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project