Configure Eudora 5.1 for Windows (using the Wizard)

Configure Eudora 5.1 for Windows (using the Wizard)
Configure Eudora 5.1 for Windows (using the Wizard)
If you were using an
you do NOT need
earlier version of Eudora and have just upgraded to
to follow these steps. Your settings will be converted
Eudora 5.1,
If you have never used
any version of Eudora before on the computer you are
using, or
if you have deleted Eudora from your computer
and then reinstalled it, follow these steps to
set up
Eudora to access your SCRTC e-mail.
1. Start Eudora 5.1
and enter your username and password if requested.
The New
Account Wizard window will open
2. The first screen
welcomes you to the Wizard. Click Next.
3. Click the radio
button labeled "Create a brand new email account."
Click Next.
4. Type in your full
name as you want it to appear in outgoing messages.
You may
use both upper- and lowercase. Click
5. Type in your
e-mail address. This is your username followed by ""
(for example:
[email protected]
). Click
6. Type in your
7. Your Incoming
username where it asks for your Login Name. Click Next.
E-Mail Server is . Type your
information in and click
8. Outgoing E-Mail
Server will default from what you entered in the
Change this to Click Next.
9. The final step
congratulates you on your success. Click Finish.
If you need to change
from the
your settings later, reopen the same dialog box by
previous step. choosing Opt
Changing Settings in
1. Open Eudora and on the menu bar click on "Tools".
2. Click on "Options"
3. On the left hand side, select "Checking Mail".
4. Verify that the Mail Server is set to
5. On the left hand side, select "Sending Mail".
6. Verify that the SMTP Server is set to
7. Click on "OK" at the bottom of the window.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF