Catalogue Sheet: EP Series

Catalogue Sheet: EP Series
Project/Location:
EP Series
Contractor:
Date:
All-Plastic Pictogram Exit Sign
Commercial-grade, universal-mount
and snap-fit
FEATURES
Prepared by:
TYPICAL SPECIFICATIONS
The Emergi-Lite® EP Series is a compact pictogram Exit Sign with
an all-in-one, snap-fit design. Easy to install and affordable, the
EP Series Exit Sign is ideally suited for commercial applications,
especially those in which large numbers of Exit Signs are required.
Supply and install the Emergi-Lite® EP pictogram Exit Sign. The
equipment shall operate with universal 2-wire AC input voltage
of 120 to 347VAC at less than 2.5W and universal 2-wire DC input
voltage from 6 to 24VDC at 1W consumption for single and double
face signs. The sign shall come standard with a canopy and shall be
suitable for wall, end, or ceiling mounting. The frame, faceplates,
back plate and canopy shall each be constructed of a one-piece
UV-stabilized thermoplastic material colored factory white. The
light source shall be white light-emitting diodes (LED) and shall
provide even illumination in normal and emergency operation.
The equipment in a Self-Powered configuration shall use a sealed
Nickel-Cadmium battery of 2.4V nominal voltage. The equipment
shall recharge the battery in 24 hours and stay illuminated at least
two hours upon AC failure.
• Durable, factory white, thermoplastic housing
• Universal mounting: wall-, end-, or ceiling-mount
• Long-life white LED light source
• Certified CSA 22.2 No.141-10 for pictogram safety signs
• Two-wire universal AC input: 120 to 347VAC; two-wire standard
DC input: 6 to 24VDC
• Energy efficient – consumes less than 2.5W in AC mode and only
1W in DC-remote
The pictogram Exit Sign shall be listed to the CSA 22.2 No.141-10
standard.
• Self-Powered model delivers standard two hours of back-up
lighting
The equipment shall be Emergi-Lite® Model: _________________ .
• Optional vandal-proof shield and tamper-proof screws
DIMENSIONS
Dimensions are approximate and subject to change.
8” [20.3 cm]
61/8” [15.6 cm]
87/8” [22.5cm]
41/2” [11.4 cm]
21/4” [5.7 cm]
121/8” [30.7 cm]
13” [33.0 cm]
POWER CONSUMPTION AND UNIT RATING
MODEL
AC only
AC/DC standard
AC/Special DC
AC SPECS
DC SPECS
120 to 347VAC
120 to 347VAC
120 to 347VAC
Less than 2.5W
Less than 2.5W
Less than 2.5W
6 to 24VDC
36, 48, 120VDC
Less than 1.5W
Less than 2.5W
Two-wire 120V AC/DC
120VAC
Self-Powered
120 to 347VAC
Less than 2.5W
120VDC
Less than 2.5W
Less than 3W
Nickel-Cadmium Battery
Min. 2 hours
ORDERING INFORMATION
SERIES
EP= plastic sign
FACES/MOUNTING
1= single face, universal
mounting
2= double face, universal
mounting
3= universal face, universal
mounting
ENCLOSURE COLOUR
B= black
W= factory white
VOLTAGE
I= 120 to 347VAC; selfpowered
U= u
niversal 120 to 347VAC; 6
to 24VDC
U00= 120 to 347VAC only
U36= 120 to 347VAC; 36VDC
U48= 120 to 347VAC; 48VDC
U120= 347VAC; 120VDC
24= 2-wire 6 to 24VDC
2120= 2-wire 120VAC/VDC
OPTIONS
TP= tamper-proof screws*
VR= vandal resistant shield
with tamper-proof
screws*
* Option VR not available with
universal face.
* 990.0119-E= tamper-proof bit
(sold separately)
EXAMPLE: EP1WUVR
Unlike EXIT signs, the pictogram sign is not available in double arrow configurations.
54
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement