- No category
advertisement
240W Single Output Switching Power Supply
F 110
H L G - 2 4 0 H s e r i e s
¡½
¡E
¡E
Features :
Universal AC input / Full range (up to 305VAC)
Built-in active PFC function
¡E
¡E
Protections: Short circuit / Over current / Over voltage / Over temperature
Cooling by free air convection
¡E
¡E
OCP point adjustable through output cable or internal potentiometer
¡E
IP67 / IP65 design for indoor or outdoor installations
Three in one dimming function (1~10Vdc or PWM signal or resistance)
¡E
Suitable for LED lighting and street lighting applications
¡E
Compliance to worldwide safety regulations for lighting
¡E
¡E
Suitable for dry / damp / wet locations
5 years warranty (Note.10)
SELV
IP65 IP67
..
HLG-240H-12 A Blank : IP67 rated. Cable for I/O connection.
A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer.
B : IP67 rated. Constant current level adjustable through output cable with 1~10Vdc or 10V PWM signal or resistance.
C : Terminal block for I/O connection. Output voltage and constant current level can be adjusted through internal potentiometer.
D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details.
SPECIFICATION
MODEL
OUTPUT
INPUT
HLG-240H-12 HLG-240H-15 HLG-240H-20 HLG-240H-24 HLG-240H-30 HLG-240H-36 HLG-240H-42
DC VOLTAGE
CONSTANT CURRENT REGION
Note.4
RATED CURRENT
RATED POWER
12V
6 ~12V
16A
192W
RIPPLE & NOISE (max.) Note.2
150mVp-p
VOLTAGE ADJ. RANGE Note.6
11.2 ~ 12.8V
15V
7.5 ~ 15V
15A
225W
150mVp-p
14 ~ 16V
20V
10 ~ 20V
12A
240W
150mVp-p
18.6 ~ 21.4V
24V
12 ~ 24V
10A
240W
150mVp-p
22.4 ~ 25.6V
VOLTAGE TOLERANCE Note.3
Can be adjusted by internal potentiometer A type only
CURRENT ADJ. RANGE
LINE REGULATION
LOAD REGULATION Note.8
SETUP, RISE TIME Note.9
8 ~ 16A
¡Ó2.5%
¡Ó0.5%
¡Ó2.0%
7.5 ~ 15A
¡Ó2.0%
¡Ó0.5%
¡Ó1.5%
6 ~ 12A
¡Ó1.0%
¡Ó0.5%
¡Ó1.0%
2500ms, 80ms at full load 230VAC /115VAC
5 ~ 10A
¡Ó1.0%
¡Ó0.5%
¡Ó0.5%
HOLD UP TIME (Typ.) 15ms at full load 230VAC /115VAC
30V
15 ~ 30V
8A
240W
200mVp-p
28 ~ 32V
4 ~ 8A
¡Ó1.0%
¡Ó0.5%
¡Ó0.5%
36V
18 ~ 36V
6.7A
241.2W
250mVp-p
33.5 ~ 38.5V
3.3 ~ 6.7A
¡Ó1.0%
¡Ó0.5%
¡Ó0.5%
42V
21 ~ 42V
5.72A
240.24W
250mVp-p
39 ~ 45V
2.86 ~ 5.72A
¡Ó1.0%
¡Ó0.5%
¡Ó0.5%
VOLTAGE RANGE
FREQUENCY RANGE
POWER FACTOR (Typ.)
EFFICIENCY (Typ.)
Note.5
AC CURRENT (Typ.)
INRUSH CURRENT (
LEAKAGE CURRENT
Typ .)
90 ~ 305VAC
47 ~ 63Hz
127 ~ 431VDC
PF>0.98/115VAC, PF>0.95/230VAC at full load (Please refer to "Power Factor Characteristic" curve)
90% 90% 92% 93% 93% 93% 93%
4A / 115VAC 2A / 230VAC
COLD START 75A/230VAC
1.2A / 277VAC
<0.75mA / 277VAC
HLG-240H-48
48V
24 ~ 48V
5A
240W
250mVp-p
44.8 ~ 51.2V
2.5 ~ 5A
¡Ó1.0%
¡Ó0.5%
¡Ó0.5%
93.5%
HLG-240H-54
54V
27 ~ 54V
4.45A
240.3W
350mVp-p
50 ~ 57V
2.23 ~ 4.45A
¡Ó1.0%
¡Ó0.5%
¡Ó0.5%
94%
PROTECTION
ENVIRONMENT
SAFETY &
EMC
OTHERS
NOTE
OVER CURRENT
SHORT CIRCUIT
OVER VOLTAGE
OVER TEMPERATURE
WORKING TEMP.
WORKING HUMIDITY
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
Note.4
95 ~ 108%
Protection type : Constant current limiting, recovers automatically after fault condition is removed
Hiccup mode, recovers automatically after fault condition is removed
13.5 ~ 18V 17.5 ~ 21.5V 23.5 ~ 27.5V 27 ~ 34V 33 ~ 39V 43 ~ 49V 48 ~ 54V
Protection type : Shut down and latch off o/p voltage, re-power on to recover
105 5 (TSW1) 95 5 (TSW1)
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
-40 ~ +70
¢J
(Refer to "Derating Curve")
20 ~ 95% RH non-condensing
-40 ~ +80 ¢J , 10 ~ 95% RH
¡Ó 0.03%/ ¢J (0 ~ 50 ¢J )
10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes
55 ~ 63V 60 ~ 67V
SAFETY STANDARDS Note.7
UL1012, CAN/CSA-C22.2 No. 107.1-01, UL8750, CSA C22.2 No. 250.0-08, TUV EN61347-1, EN61347-2-13 independent
(except for HLG-240H C type), UL60950-1, UL8750, TUV EN60950-1, IP65 or IP67, J61347-1, J61347-2-13 approved
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
EMC EMISSION
I/P-O/P:3.75KVAC
I/P-FG:1.88KVAC
O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 ¢J / 70% RH
Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C (
¡Ù
50% load) ; EN61000-3-3
EMC IMMUNITY
MTBF
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria A
207.9K hrs min.
MIL-HDBK-217F (25 ¢J )
244.2*68*38.8mm (L*W*H)(HLG-240H-Blank/A/B) 251*68*38.8mm (L*W*H)(HLG-240H-C) DIMENSION
PACKING 1.3Kg; 12pcs/16.6Kg/0.84CUFT(HLG-240-Blank/A/B) 1.23Kg; 12pcs/15.8Kg/1.16CUFT(HLG-240-C)
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25
¢J of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Constant current operation region is within 50% ~100% rated output voltage. This is the suitable operation region for LED related applications, but please reconfirm special electrical requirements for some specific system design.
5. Derating may be needed under low input voltages. Please check the static characteristics for more details.
6. Type A and type C only.
7. Safety and EMC design refer to EN60598-1, subject 8750(UL), CNS15233, GB7000.1, FCC part18.
8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time.
9. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
10. Refer to warranty statement.
240W Single Output Switching Power Supply
Mechanical Specification
Blank:(HLG-240H)
244.2
220.2
12
9.6
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
T case
110.1
¡° T case: Max. Case Temperature.
H L G - 2 4 0 H s e r i e s
Case No.994C
Unit:mm
-V(Black)
+V(Red)
¡°IP67 rated. Cable for I/O connection.
A Type:(HLG-240H-_A)
12
9.6
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
244.2
220.2
T case
¡° T case: Max. Case Temperature.
110.1
Vo
ADJ.
Io
ADJ.
¡° IP65 rated. Output voltage and constant current level can be adjusted through internal
(Can access by removing the rubber stopper on the case.) potentiometer.
B Type:(HLG-240H-_B)
12
9.6
244.2
220.2
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
T case
110.1
¡° T case: Max. Case Temperature.
-V(Black)
+V(Red)
-V(Black)
+V(Red)
DIM+(Blue)
DIM-(White)
File Name:HLG-240H-SPEC 2012-09-11
240W Single Output Switching Power Supply
C Type:(HLG-240-_C)
15.4
8
251
220.2
I/P
1
2
3
T case
110.1
Vo
ADJ.
H L G - 2 4 0 H s e r i e s
Io
ADJ.
1
2
O/P
¡° T case: Max. Case Temperature.
¡° Output voltage and constant current level can be adjusted through internal
(Can access by removing the rubber stopper on the case.) potentiometer.
AC Input Terminal Pin No. Assignment
Pin No.
1
2
3
Assignment
FG
AC/L
AC/N
DC Output Terminal Pin No. Assignment
Pin No.
1
2
Assignment
-V
+V
D Type(option):(HLG-240H-_D)
12
9.6
244.2
220.2
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
T case
110.1
¡° T case: Max. Case Temperature.
-V(Black)
+V(Red)
¡° IP67 rated. Timer dimming function, contact MEAN WELL for details.
Block Diagram
I/P
EMI FILTER
&
RECTIFIERS
PFC
CIRCUIT
POWER
SWITCHING
FG
O.L.P.
PFC
CONTROL
PWM & PFC
CONTROL
RECTIFIERS
&
FILTER
O.L.P.
DETECTION
CIRCUIT
O.V.P.
Fosc : 100KHz
+V
-V
DIM+
DIM-
(B Type)
File Name:HLG-240H-SPEC 2012-09-11
240W Single Output Switching Power Supply
H L G - 2 4 0 H s e r i e s
Derating Curve Static Characteristics
100VAC
230VAC
60
40
20
100
80
-40 -25 -10 0 15 30 50
AMBIENT TEMPERATURE ( ¢J )
60 70 (HORIZONTAL)
60
50
40
100
90
80
70
90 100 125 135 145 155 165 175 180 200 230 305
INPUT VOLTAGE (V) 60Hz
Power Factor Characteristic
Constant Current Mode
1 .0 0
0 .9 8
0 .9 6
0 .9 4
0 .9 2
0 .9 0
0 .8 8
0 .8 6
0 .8 4
0 .8 2
0 .8 0
0 .7 8
5 0 % 6 0 % 7 0 %
LOAD
8 0 % 9 0 % 1 0 0 %
(240W)
2 7 7 V a c
2 3 0 V a c
1 1 5 V a c
HLG-240H series possess superior working efficiency that up to 93.5% can be reached in field applications.
96
92
88
84
277Vac
230Vac
115Vac 80
76
72
10% 20% 30% 40% 50% 60% 70% 80% 90% 100%
LOAD
File Name:HLG-240H-SPEC 2012-09-11
240W Single Output Switching Power Supply
H L G - 2 4 0 H s e r i e s
DRIVING METHODS OF LED MODULE
There are two major kinds of LED drive method "direct drive" and "with LED driver".
A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs.
Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B).
100
(B)
Constant
Current area
(A) Constant
Voltage area
50
(max.)
(C)
Hiccup
Protection
50 95
Typical LED power supply I-V curve
DIMMING OPERATION (for B-type only)
Io (%)
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
HLG-240H
-V(Black)
+V(Red)
DIM+(Blue)
DIM-(White)
¡° Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or
1 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-.
¡° Please DO NOT connect "DIM-" to "-V".
¡° Reference resistance value for output current adjustment (Typical)
40K
£[
50K
£[
Resistance value
Single driver
Multiple drivers
(N=driver quantity for synchronized dimming operation)
10K
£[
20K
£[
30K
£[
10K /N £[ 30K /N
Percentage of rated current 10% 20% 30% 40% 50%
60K
£[
60%
70K
£[
70%
80K
£[
80%
90K
£[ 100K£[
90% 100%
OPEN
-----
95%~108%
¡° 1 ~ 10V dimming function for output current adjustment (Typical)
Dimming value 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V OPEN
80% 90% 100% 95%~108% Percentage of rated current
Percentage of rated current
10%
10%
20%
20%
30%
30%
40%
40%
50%
50%
60% 70%
¡° 10V PWM signal for output current adjustment (Typical): Frequency range :100Hz ~ 3KHz
Duty value 10% 20% 30% 40% 50% 60% 70%
60% 70%
80%
80%
90%
90%
100%
100%
OPEN
95%~108%
¡°Using the built-in dimming function on B-type model can't turn the lighting fixture totally dark. Please refer to the connection method below to achieve 0% brightness of the lighting fixture connecting to the LED power supply unit.
¡°Direct connecting to LEDs is suggested, but is not suitable for using additional drivers.
Dimming connection diagram for turning the lighting fixture ON/OFF :
N FG L
Relay Switch Adjuster
0~100K Ohms resistance
1~10V DC Voltage
10V PWM Signal
Green/
Yellow
Brown
Blue
AC/L
AC/N
HLG-240H
B Type
DIM+
DIM-
V(-)
V(+)
Blue
White
Black
Red LED Lighting Fixture
Using a switch and relay can turn ON/OFF the lighting fixture.
1.Output constant current level can be adjusted through output cable by connecting a resistance or 1~10Vdc or 10V PWM signal between DIM+ and DIM-.
2.The LED lighting fixture can be turned ON/OFF by the switch.
File Name:HLG-240H-SPEC 2012-09-11
240W Single Output Switching Power Supply
H L G - 2 4 0 H s e r i e s
WATERPROOF CONNECTION
¡· Waterproof connector
Waterproof connector can be assembled on the output cable of HLG-240H to operate in dry/wet/damp or outdoor environment.
AC source
HLG-240H
I/P O/P
Size Pin Configuration (Female)
M12
Order No.
Suitable Current
¡· Cable Joiner
66
26 20
4-PIN
5A/PIN
M12-04
10A max.
5-PIN
5A/PIN
M12-05
10A max.
Size
M15
Order No.
Suitable Current
Pin Configuration (Female)
2-PIN
12A/PIN
M15-02
12A max.
CJ04-1 suitable for 14AWG~16AWG
CJ04-2 suitable for 18AWG~22AWG
LED Lamp
Up to four wires can be connected through this cable joiner by soldering or clamping by tools.
LED Lamp
HLG-240H
O/P Wires
¡°CJ04 cable joiner can be purchased independently for user's own assembly.
MEAN WELL order No. : CJ04-1, CJ04-2.
¡· Junction Box(Option )
220.2
382.2
FG (Green/Yellow)
AC/L(Brown)
AC/N(Blue)
3- PF 1/2"
76 10
5
2-
£r
5
-V(Black)
+V(Red)
3- PF 1/2"
¡°Optional junction box available for A / Blank - type , please contact MEAW WELL for details.
86
File Name:HLG-240H-SPEC 2012-09-11
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project