at88ck201stk quick start guide

at88ck201stk quick start guide
Dear ATMEL AT88CK201STK customer,
Thank you for selecting the AT88CK201STK evaluation kit. We hope this kit will be a useful
platform as you explore the full potential of the CryptoRF Reader chip, AT88RF1354, and the
CryptoRF memory products.
The AT88CK201STK is designed to be used with Atmel’s JTAGICE mkII debugger, AVR Studio
developer’s suite and the ATMEL Crypto Evaluation Studio (ACES). This seamless toolchain
provides a convenient and powerful environment for generating, debugging and testing your
embedded software. For more information on these and other CryptoRF development tools,
visit www.atmel.com/cryptokits.
IMPORTANT MESSAGE!
Atmel posts frequent updates to the AT88CK201STK software and documentation on our website. You may download the latest version for free from www.atmel.com/cryptokits.
Should you experience problems with this kit, please ensure that you have downloaded and
installed the latest software version before contacting an Atmel sales representative.
Thank you for your interest in ATMEL CryptoRF product.
AT88CK201STK Getting Started Guide
Features
 Installing ACES (ATMEL CRYPTO EVALUATION STUDIO)
 Configuring the board for SPI mode
 Powering the board
 Reading a tag
CryptoRF™
AT88RF1354
Reader Board
1 Introduction
AT88CK201STK Getting
Started Guide
AT88CK201STK is a CryptoRF reader Starter Kit, which can be used as a
reference design and development system for the AT88RF1354 RF reader
IC.
Contents:






AT88CK201BK modular CryptoRF reader board
AT88Microbase for demos and development
Common 10-PIN header for any Atmel STK and EVK
CryptoRF development library
JTAG, LED, and buzzer for debug and feedback
CryptoRF tag assortment and USB cable
Figure 1-1 AT88CK201 Starter Kit
1.
Installing ACES
Go to www.atmel.com/cryptokits to download and install the latest ACES.
2.
Configuring the board for SPI mode
Ensure K1 is in SPI mode.
K1
TWI Position
3.
K1
SPI Position
TWI
TWI
SPI
SPI
Powering up the board
The AT88CK201STK is a USB powered device. The AT88Microbase can be directly inserted into
the USB port or be used with the 6” USB cable provided.
Power LED
2
Quick Start Guide
CryptoRF Design
Upon receiving power, the blue power LED “LEDP” will light.
4.
Reading a tag


Insert the AT88CK201STK into a USB port (Section 2)
Launch ACES

ACES will acknowledge the kit by displaying the kit name.
Kit Name

Place a tag on the antenna portion of the AT88CK201STK.
The “CRF detected” row will now indicate the device number.
3
8667A–Crypto–5/09
5.

Congratulation, your AT88CK201STK is up and running

See ACES online Help for additional information
References and further information
A complete reference design including schematics, Gerber files, BOM, Hardware User Guide,
development and demonstration software is conveniently downloadable from the internet at
www.atmel.com/cryptokits.
6.
EVALUATION BOARD/KIT IMPORTANT NOTICE
4
Quick Start Guide
CryptoRF Design
This evaluation board/kit is intended for use for FURTHER ENGINEERING,
DEVELOPMENT, DEMONSTRATION, OR EVAL PURPOSE ONLY. It is not a finished
product and may not (yet) comply with some or any technical or legal requirements that
are applicable to finished products, including, without limitations, directives regarding
electromagnetic regarding electromagnetic compatibility, recycling (WEEE), FCC, CE or
UL (except as may be otherwise noted on the board/kit). Atmel supplied this board/kit “AS
IS,” without any warranties, with all faults, at the buyer’s and further users’ sole risk. The
user assumes all responsibly and liability for proper and safe handling of goods. Further,
the user indemnifies Atmel from claims arising from the handling or use of goods. Due to
open construction of the product, it is the user’s responsibility to take any and all
appropriate precautions with regard to electrostatic discharge and any other technical or
legal concerns.
EXCEPT TO THE EXTENT OF INDEMNITY SET FORTH ABOVE, NEITHER USER NOR
ATMEL SAHLL BE LIABLE TO EACH OTHER FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
No license is granted under any patent right or other intellectual property right of Atmel covering or
relating to any machine, process, or combination in which such Atmel product or services might be
or are used.
Mailing Address:
Atmel Corporation, 2325 Orchard Parkway, San Jose, Ca 95131
5
8667A–Crypto–5/09
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement