SFA130 SFPA130 operating and installation instructions

SFA130 SFPA130 operating and installation instructions
SFA130
SFPA130
operating and installation instructions
SFA130-SFPA130
1 Instructions
1.1
1.2
1.3
1.4
1.5
1.6
1.7
General safety instructions
Manufacturer liability
Appliance purpose
Disposal
Identification plate
This user manual
How to read the user manual
2 Description
2.1
2.2
2.3
2.4
General Description
Control panel
Other parts
Available accessories
3 Use
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4
EN
Contents
4
5
5
5
6
6
6
7
7
8
8
9
11
Instructions
First use
Using the accessories
Using the oven
Cooking advice
Special functions
Preset recipes
Personal recipes
Settings
4 Cleaning and maintenance
4.1 Instructions
4.2 Cleaning the surfaces
4.3 Ordinary daily cleaning
4.4 Food stains or residues
4.5 Removing the door
4.6 Cleaning the door glazing
4.7 Removing the internal glass panels
4.8 Cleaning the inside of the oven
4.9 Vapor Clean: assisted oven cleaning (on some models only)
4.10 Pyrolytic: automatic oven cleaning
4.11 Extraordinary maintenance
5 Installation
5.1 Electrical connection
5.2 Cable replacement
5.3 Positioning
11
11
12
15
19
24
27
33
36
38
38
38
38
38
38
39
39
40
42
45
48
50
50
50
51
We advise you to read this manual carefully, which contains all the instructions for
maintaining the appliance's aesthetic and functional qualities.
For further information on the product: www.smeg.com
3
Instructions
1 Instructions
1.1 General safety instructions
Risk of personal injury
• During use the appliance and its
accessible parts become very hot.
• Never touch the heating elements
during use.
• Keep children under eight years
of age at a safe distance if they
are not constantly supervised.
• Children must never play with the
appliance.
• Never rest metallic objects such
as knives, forks, spoons and lids
on the appliance during use.
• Switch the appliance off
immediately after use.
• Never try to put out a fire or
flames with water: turn off the
appliance and smother the flames
with a fire blanket or other
appropriate cover.
• The appliance must never be
cleaned by unsupervised children.
• Have qualified personnel carry
out installation and assistance
interventions according to the
standards in force.
• Do not modify this appliance.
• Do not insert pointed metal
objects (cutlery or utensils) into the
slots in the appliance.
4
• Do not try to repair the appliance
yourself or without the intervention
of a qualified technician.
• If the power supply cable is
damaged, contact technical
support immediately and they will
replace it.
Risk of damaging the appliance
• Do not use abrasive or corrosive
detergents on glass parts (e.g.
powder products, stain removers
and metallic sponges).
• Use wooden or plastic utensils.
• Do not seat on the appliance.
• Do not use steam jets for cleaning
the appliance.
• Do not obstruct ventilation
openings and heat dispersal slots.
• Never leave the appliance
unattended during cooking
operations where fats or oils
could be released.
• Never leave objects on the
cooking surface.
• Do not use the appliance to heat
rooms for any reason.
For this appliance
1.4 Disposal
• Ensure that the appliance is switched off
before replacing the bulb.
• Do not rest any weight or sit on the open
door of the appliance.
• Take care that no objects are stuck in the
doors.
This appliance must be disposed of
separately from other waste
(Directives 2002/95/EC, 2002/
96/EC, 2003/108/EC). The appliance
does not contain substances in quantities
sufficient to be considered hazardous to
health and the environment, in accordance
with current European directives.
To dispose of the appliance:
• Cut the power supply cable and remove
it along with the plug.
1.2 Manufacturer liability
The manufacturer declines all liability for
damage to persons or property caused by:
• use of the appliance other than the one
envisaged;
• non-observance of the user manual
provisions;
• tampering with any part of the
appliance;
• use of non-original spare parts.
1.3 Appliance purpose
• This appliance is intended for cooking
food in the home environment. Every
other use is considered improper.
• This appliance may be used by children
aged at least 8 and by people of
reduced physical and mental capacity,
or lacking in experience in the use of
electrical appliances, as long they are
supervised or instructed by adults who
are responsible for their safety.
• The appliance is not designed to
operate with external timers or with
remote-control systems.
Power voltage
Danger of electrocution
• Disconnect the main power supply.
• Disconnect the power cable from the
electrical system.
• Consign the appliance to the
appropriate selective collection centres
for electrical and electronic equipment
waste, or deliver it back to the retailer
when purchasing an equivalent product,
on a one for one basis.
5
EN
Instructions
Instructions
Our appliances are packed in nonpolluting and recyclable materials.
• Consign the packing materials to the
appropriate selective collection centres.
Plastic packaging
Danger of suffocation
• Do not leave the packaging or any part
of it unattended.
• Do not let children play with the
packaging plastic bags.
1.5 Identification plate
The identification plate bears the technical
data, serial number and brand name of the
appliance. Do not remove the identification
plate for any reason.
1.6 This user manual
This user manual is an integral part of the
appliance and must therefore be kept in its
entirety and in an accessible place for the
whole working life of the appliance.
Read this user manual carefully before using
the appliance.
1.7 How to read the user manual
This user manual uses the following reading
conventions:
Instructions
General information on this user
manual, on safety and final
disposal.
Description
Description of the appliance and its
accessories.
Use
Information on the use of the
appliance and its accessories,
cooking advice.
Cleaning and maintenance
Information for proper cleaning and
maintenance of the appliance.
Installation
Information for the qualified
technician: installation, operation
and inspection.
Safety instructions
Information
Advice
1. Use instruction sequence.
• Single use instruction.
6
Description
EN
2 Description
2.1 General Description
1 Control panel
2 Oven light
3 Seal
4 Door
5 Fan
6 Rack/tray support frames
7 Pizza plate
Frame shelf
7
Description
2.2 Control panel
Return knob (1)
2.3 Other parts
Using this knob you can return to the
appliance's previous menu item. It also lets
you manually turn the oven light on and off.
Shelves
Display (2)
Displays the current time, the cooking
parameters, and all the appliance's
functions.
Control knob (3)
This knob allows you to turn the appliance
on and off and select the various available
functions.
Turn the knob right or left to change/select
the required item. Press to confirm.
Keep the knob pressed in for at
least 5 seconds to immediately
complete any cooking program.
8
The appliance features shelves for
positioning trays and racks at different
heights. The insertion heights are indicated
from the bottom upwards (see 2.1 General
Description).
Cooling fan
The fan cools the oven and comes into
operation during cooking.
The fan causes a steady outflow of air from
above the door which may continue even
after the appliance has been turned off.
Interior lighting
The oven light comes on when the door is
opened or any function is selected, except
for
,
and
.
Turn the return knob briefly to the right or left
to activate or deactivate internal lighting.
Description
Oven tray
EN
2.4 Available accessories
Some models are not provided
with all accessories.
Rack
Useful for collecting fat from foods placed
on the rack above.
Deep tray
Useful for collecting fat from foods placed
on the rack.
Useful for supporting containers with food
during cooking.
Pizza plate
Tray rack
To be placed over the top of the oven tray;
for cooking foods which may drip.
9
Description
Specially designed for cooking pizza and
similar dishes.
Pizza plate cover
The pizza plate must only be used
for cooking pizza and similar
dishes. When cooking other
dishes, the pizza plate must be
removed from its compartment and
replaced with the special pizza
plate cover.
Pizza spatula
To replace the pizza plate when it is not in
use.
The oven accessories intended to
come into contact with food are
made of materials that comply with
the provisions of current legislation.
For easily placing the pizza on the pizza
plate.
10
Original supplied and optional
accessories can be requested to
Authorised Assistance Centres.
Use only original accessories
supplied by the manufacturer.
Use
3.1 Instructions
High temperature inside the oven
during use
Danger of burns
• Keep the oven door closed during
cooking.
• Protect your hands wearing heat
resistant gloves when moving food
inside the oven.
• Do not touch the heating elements inside
the oven.
• Do not pour water directly onto very hot
trays.
• Do not allow children to get near the
oven when it is in operation.
High temperature inside the oven
during use
Danger of fire or explosion
• Do not spray any spray products near
the oven.
• Do not use or leave flammable materials
near the oven.
• Do not use plastic kitchenware or
containers when cooking food.
• Do not put sealed tins or containers in
the oven.
• Do not leave the oven unattended
during cooking operations where fats or
oils could be released.
• Remove all trays and racks which are
not required during cooking.
Improper use
Risk of damage to enamelled
surfaces
EN
3 Use
• Do not cover the bottom of the oven
cavity with aluminium or tin foil sheets.
• If you wish to use greaseproof paper,
place it so that it will not interfere with the
hot air circulation inside the oven.
• Do not place pans or trays directly on
the bottom of the oven cavity.
• Do not pour water directly onto very hot
trays.
3.2 First use
1. Remove any protective film from the
outside or inside of the appliance,
including accessories.
2. Remove any labels (apart from the
technical data plate) from the
accessories and from the oven cavity.
3. Remove and wash all the appliance
accessories (see 4 Cleaning and
maintenance).
4. Heat the empty oven at the maximum
temperature to burn off any residues left
by the manufacturing process.
11
Use
3.3 Using the accessories
Tray rack
Racks and trays
The tray rack has to be inserted into the tray.
In this way fat can be collected separately
from the food which is being cooked.
Racks and trays have to be inserted into the
side guides until they come to a complete
stop.
• The mechanical safety locks that prevent
the rack from being taken out
accidentally have to face downwards
and towards the oven back.
Gently insert racks and trays into
the oven until they come to a stop.
Clean the trays before using them
for the first time to remove any
residues left by the manufacturing
process.
12
Cover and pizza plate (on some models
only)
Improper use
Risk of damage to surfaces
• Do not use the pizza plate other than as
described, for example do not use it on
gas or glass ceramic hobs or in ovens
which are not designed for this purpose.
• If you like oil on your pizza, it is best to
add it after removal from the oven since
oil stains on the pizza plate are unsightly
and may reduce its efficiency.
• If the pizza plate is not in use, cover the
bottom of the oven with the cover
provided.
Pizza spatula (on some models only)
Always hold the pizza spatula by the
handle to put food in and take it out of the
oven. You are advised to dust the steel
surface lightly with flour to make it easier to
slide fresh products on and off, as they
could stick to the steel due to their moisture
content.
With the oven cold, remove the cover from
the bottom and insert the pizza plate. Make
sure that the plate is inserted correctly in the
recess provided.
Use the specially stored programs for
cooking, see “Preset recipes”.
13
EN
Use
Use
3.4 Using the oven
Favourites
First use
Press the return knob from the clock screen
to display the last programs or personal
recipes used.
On the first use, or after a power failure,
will be flashing on the appliance's
display. In order to be able to start any
cooking program, the current time must be
set (if the oven is being turned on for the first
time, it is also recommended you set the
required language).
Press the control knob to enter the settings
menu, see “3.9 Settings”.
Cooking functions
1. Select “cooking functions” from the menu
by pressing the control knob.
The appliance language is set to
“English” by default.
When first connecting or after the
power has been cut for a time it
will be necessary to wait a few
seconds before you can interact
with the appliance.
14
2. Turn the control knob to select the
required function. Press the knob to
confirm the selection.
3. The appliance will begin the automatic
pre-heat phase. The display will show
the chosen function, the pre-set
temperature, the current time and the
progress bar of the temperature reached
(preheating).
Turn the control knob to change
the preset temperature at any time.
Press to confirm or wait 5 seconds.
Interrupting a function
Press the return knob to interrupt a cooking
function. Select the required option and
confirm it using the return knob.
Keep the control knob pressed in
for at least 5 seconds to
immediately interrupt cooking at
any time and return to the main
menu.
It is not recommended to place the
dish in the oven during the
automatic pre-heat stage.
4. When the preheating stage is over a
buzzer will sound to indicate that the
food can be placed inside the oven.
15
EN
Use
Use
Functions list
Certain functions are not available
on all models.
Eco
The combination of the fan and the
circulaire heating element, in ECO
mode, is particularly indicated for
cooking on a single shelf, with
reduced power consumption.
Static
As the heat comes from above and
below at the same time, this system
is particularly suitable for certain
types of food. Traditional cooking,
also known as static cooking, is
suitable for cooking just one dish at
a time. Perfect for all types of roasts,
bread and cakes and in any case
particularly suitable for fatty meats
such as goose and duck.
Grill
The heat coming from the grill
element gives perfect grilling results
above all for thin and medium
thickness meat and in combination
with the rotisserie (where fitted)
gives the food an even browning at
the end of cooking. Perfect for
sausages, spare ribs and bacon.
This function enables large
quantities of food, particularly meat,
to be grilled evenly.
16
Lower element
The heat coming just from the
bottom allows you to complete the
cooking of foods that require a
higher bottom temperature, without
affecting their browning. Perfect for
cakes, pies, tarts and pizzas.
Fan assisted
The operation of the fan, combined
with traditional cooking, ensures
consistent cooking even with
complex recipes. Perfect for biscuits
and cakes, even when
simultaneously cooked on several
levels. (For multiple-level cooking,
we recommend using the 1st and 4th
shelves).
Turbo
The combination of fan assisted
cooking and traditional cooking
allows different foods to be cooked
on several levels extremely quickly
and efficiently, without odours and
flavours mingling. Perfect for large
volumes that call for intense
cooking. (For multiple-level cooking,
we recommend using the 1st and 4th
shelves).
Fan with grill
The air produced by the fan softens
the strong heatwave generated by
the grill, grilling perfectly even very
thick foods. Perfect for large cuts of
meat (e.g. shin of pork).
Fan + bottom
The combination of the fan with just
the lower heating element allows
cooking to be completed more
rapidly. This system is
recommended for sterilising or for
finishing off the cooking of foods
which are already well-cooked on
the surface, but not inside, which
therefore need a little more heat.
Perfect for any type of food.
Circulaire + fan with grill
The combination of fan assisted
cooking and traditional cooking
allows you to cook different foods
on several levels extremely quickly
and efficiently, without odours and
flavours mingling. Perfect for large
volumes that call for intense
cooking.
Circulaire
The combination of the fan and the
circulaire heating element
(incorporated in the rear of the
oven) allows you to cook different
foods on several levels, as long as
they need the same temperatures
and type of cooking. Hot air
circulation ensures instant and even
distribution of heat. It will be
possible, for instance, to cook fish,
vegetables and biscuits
simultaneously (on different levels)
without mixing odours and flavours.
17
EN
Use
Use
3.5 Cooking advice
General advice
• Use a fan assisted function to achieve
consistent cooking at several levels.
• It is not possible to shorten cooking times
by increasing the temperature (the food
could be overcooked on the outside and
undercooked on the inside).
• To prevent condensation from forming on
the glass, hot food should not be left
inside the oven for too long after
cooking.
Advice for cooking meat
• Cooking times vary according to the
thickness and quality of the food and to
consumer taste.
• Use a meat thermometer when roasting
meat, or simply press on the roast with a
spoon. If it is hard, it is ready; if not, it
needs another few minutes cooking.
Advice for cooking with the Grill and the
Fan with grill
• Meat can be grilled even when it is put
into the cold oven or into the preheated
oven if you wish to change the effect of
the cooking.
• With the Fan with grill function, we
recommend that you preheat the oven
before grilling.
• We recommend placing the food at the
centre of the rack.
18
Advice for cooking desserts/pastries and
biscuits
• Use dark metal moulds: they help to
absorb the heat better.
• The temperature and the cooking time
depend on the quality and consistency
of the dough.
• To check whether the dessert is cooked
right through: at the end of the cooking
time, put a toothpick into the highest point
of the dessert. If the dough does not stick
to the toothpick, the dessert is cooked.
• If the dessert collapses when it comes
out of the oven, on the next occasion
reduce the set temperature by about
10°C, selecting a longer cooking time if
necessary.
Advice for defrost and proving
• Place frozen foods without their
packaging in a lidless container on the
first shelf of the oven.
• Avoid overlapping the food.
• To defrost meat, use the rack placed on
the second level and a tray on the first
level. In this way, the liquid from the
defrosting food drains away from the
food.
• The most delicate parts can be covered
with aluminium foil.
• For successful proving, a container of
water should be placed in the bottom of
the oven.
To save energy
• Stop cooking a few minutes before the
time normally used. Cooking will
continue for the remaining minutes with
the heat which has accumulated inside
the oven.
• Reduce any opening of the door to a
minimum to avoid heat dispersal.
• Keep the inside of the appliance clean
at all times.
• (Where fitted) When it is not being used,
remove the pizza plate and put the
cover back in its slot.
Minute minder during function
This function only activates the
buzzer, without stopping cooking.
1. Press the control knob during a cooking
function.
2. Turn the control knob right or left to set
the duration (from 1 minute to 4 hours).
After a few seconds, the
symbol
stops flashing and the countdown starts.
3. Wait for the buzzer to indicate that the
time has finished. The
symbol flashes.
Turn the knob right or left to select
another minute minder timer or
press the control knob to
deactivate the buzzer.
19
EN
Use
Use
Timed cooking
Timed cooking is the function
which allows a cooking operation
to be started and then ended after
a specific length of time set by the
user.
4. At the end of the cooking time “cooking
completed” appears on the display and
a buzzer will sound that can be
deactivated by pressing the control
knob.
Activation of timed cooking
cancels any minute minder timer
which may previously have been
set.
1. After selecting a cooking function and
temperature, press the control knob
twice.
2. Turn the knob right or left to set the
minutes of cooking from 00:01 to 12:59.
Keep the knob turned to produce a
faster increase or decrease.
3. A few seconds after the required
duration is set, the
symbol stops
flashing and timed cooking starts.
Turn the control knob to add some
minutes of cooking time.
To extend the cooking time
manually, press the control knob
again. The appliance will resume
its normal operation with the
previously selected cooking
settings.
To turn off the appliance see
“ Interrupting a function”.
Modifying the data set during timed
cooking
During operation, it is possible to modify
timed cooking duration:
1. When the
symbol is lit steadily and
the appliance is in the cooking stage,
press the control knob.
will start
flashing.
2. Turn the control knob right or left to alter
the preset cooking time.
20
Use
Programmed cooking is the
function which allows a cooking
operation to be stopped at an
established time depending on the
time set by the user, after which the
oven will switch off automatically.
1. After selecting a function and a cooking
temperature, press the control knob to set
the cooking time.
4. After a few seconds the
and
symbols stop flashing. The appliance
waits for the set start time.
EN
Programmed cooking
5. At the end of the cooking time “cooking
completed” appears on the display and
a buzzer will sound that can be
deactivated by pressing the control
knob.
2. Press the control knob before the
symbol stops flashing to set the end of
cooking time.
3. The
symbol flashes. Turn the knob
right or left to set the end of cooking time.
To extend the cooking time
manually, press the control knob
again. The appliance will resume
its normal operation with the
previously selected cooking
settings.
For safety reasons, it is not possible
to set the end of cooking time by
itself without setting the cooking
duration.
21
Use
Modifying the data set during
programmed cooking
oven off, cooking functions, keep warm or
cleaning functions (certain models only).
After modifying the cooking time,
the end of cooking time must be reset.
During operation, it is possible to modify
programmed cooking duration:
1. When the
and
symbols are lit
steadily and the appliance is waiting for
cooking to start, press the temperature
knob twice.
will start flashing.
2. Turn the control knob to alter the
previously set cooking time.
3. Press the control knob again. The
symbol switches off and
starts
flashing. The display shows the end of
cooking time.
4. Turn the control knob to delay the end of
cooking time.
5. After a few seconds the
and
symbols stop flashing and programmed
cooking restarts its operation with the
new settings.
3.6 Special functions
The special functions menu contains some
functions like the minute minder with the
Certain functions are not available
on all models.
List of special functions
Minute minder
This function sounds a buzzer when
the time set has elapsed.
Proving
Leavening helped by heat from
above allows any type of dough to
prove, ensuring optimal results in a
short time.
Defrost
Rapid defrost is assisted by
switching on the fan and the upper
heating element, ensuring even
distribution of low-temperature air
inside the oven.
Food warming
To heat food or keep it hot.
22
Use
Vapor Clean
This function makes cleaning easier
using the steam produced by a little
quantity of water poured onto the
appropriate drawing placed on the
bottom.
Pyrolytic
Setting this function, the oven
reaches temperatures up to 500°C,
destroying all the grease which
forms on the internal walls.
Minute minder
EN
Keep warm
Useful to keep already cooked
food warm without altering the taste
and smell obtained during cooking.
1. Select minute minder from the special
functions menu.
2. Turn the control knob right or left to set
the duration (from 1 minute to 4 hours).
After a few seconds, the
symbol
stops flashing and the countdown starts.
Eco pyrolytic
When this function is set, the oven
executes a pyrolytic cycle at
500°C for a pre-set time. For use in
the case of ovens which are not too
dirty.
The more complex special
functions are illustrated below. For
functions such as Vapor Clean,
Pyrolytic and Eco Pyrolytic, see “4
Cleaning and maintenance”.
23
Use
3. If you leave the minute minder setting
symbol will be displayed
screen, the
at the top left, indicating that a minute
minder timer is active.
You must return the counter to zero
to remove the special minute
minder.
Food warming
1. Position the tray on the first shelf and
place the plates to be warmed in its
centre.
2. Select “food warming” from the special
functions menu.
If a function is activated after
setting a minute minder time, this
time will be automatically used as
a minute minder for the function.
This function only activates the
buzzer, without stopping cooking.
3. Press the control knob to activate the
function, or turn it to adjust the preset
temperature.
Do not stack plates too high. Stack
plates a maximum of 5/6 high.
24
3.7 Preset recipes
This mode allows you to select a pre-set
food cooking program.
The appliance will automatically calculate
the optimum cooking parameters based on
the weight entered.
4. Select the weight of the food to cook by
turning the control knob.
Starting a program
1. Select the required program with the
control knob.
5. At this point it is possible to start the
selected program, permanently modify
the settings or delay the cooking.
2. Select the sub-category of dish to cook.
6. If you choose the “Start” option, cooking
will start with the program's predefined
settings and the display will show all the
parameters set.
3. Select the type of cooking (where
possible, based on the dish chosen)
The time shown does not include
the time to reach temperature.
Once the set temperature has
been reached, the cooking
program will have the duration
shown.
25
EN
Use
Use
The predefined cooking
parameters can be changed at
any time, even after cooking has
started.
7. A message will indicate when to place
the food in the oven and enable the start
of cooking.
It is not recommended to place the
dish in the oven during the
automatic pre-heat stage. Wait for
the specific message.
3. Press the return knob to exit and finish the
program.
Permanently changing a program
1. Select the program to change and the
change option.
Program end
1. When the program has finished, the
appliance will warn the user with
buzzers and the flashing
symbol.
2. Select the function to associate with the
program using the control knob.
2. Press the control knob to perform
cooking with the same parameters
currently set (press the knob twice if the
buzzer is active). The appliance will
automatically restart cooking if it is at the
correct temperature; otherwise it will also
resume preheating.
Cooking in sequence is useful to
cook multiple dishes of the same
type. For example, it can be used
to cook several pizzas in a row.
26
3. Select the weight
Use
5. Select the temperature to be associated
with the program.
confirm the changes which have just
been made.
EN
4. Select the cooking time
If the changes are not confirmed,
the program will remain
unchanged.
8. If the changes are confirmed the display
will show confirmation of this.
6. Select the shelf
7. Pressing the control knob again will
return to point 2 of the change sequence.
You must press the return knob to save
the program. The appliance will ask to
27
Use
Predefined program table
BREAD
Subcategory
Focaccia
Leavened bread
Cooking
-
Weight
(Kg)
Function
Level
Temp. (°C)
Time
(minutes)
1
1
Turbo
Circulaire
2
2
180
200
25
30
Function
Level
Temp. (°C)
Turbo
Fan assisted
Fan assisted
Circulaire
Turbo
Circulaire
Turbo
Circulaire
Static
Static
2
2
2
2
2
2
2
2
2
2
160
180
160
160
120
160
180
160
170
170
Function
Level
Temp. (°C)
Fan assisted
Circulaire
Circulaire
Circulaire
Circulaire
Circulaire
2
2
2
2
2
160
160
160
160
180
160
DESSERTS/PASTRIES
Subcategory
Biscuits
Brioche bread
Bundt cake
Croissants
Meringues
Muffins
Profiteroles
Sponge cake
Strudel
Tart
Cooking
-
Weight
(Kg)
0.6
1
1
0.6
0.3
0.5
0.5
1
1
0.8
Time
(minutes)
18
40
60
30
90
18
70
60
40
40
FISH
Subcategory
Fresh fish
Frozen fish
Monkfish
Sea bass
Snapper
Flounder
28
Cooking
-
Weight
(Kg)
0.5
0.5
0.8
1
1
1
2
Time
(minutes)
35
45
60
45
30
35
MEATS
Subcategory
Cooking
Bacon
Chicken
roasted
medium
well done
roasted
rare
medium
well done
roasted
-
Lamb
Pork chops
Pork loin
Pork sausages
Pork spare ribs
Rabbit
Roast beef
Turkey
Veal
Weight
(Kg)
0.5
0.5
1.5
1.5
1
1
1
1
1.5
1
1
1
3
1.2
Time
(minutes)
7
40
100
110
15
75
12
16
Function
Level
Temp. (°C)
Fan with grill
Turbo
Turbo
Turbo
Fan with grill
Turbo
Fan with grill
Fan with grill
Circulaire
Circulaire
Circulaire
Circulaire
Fan assisted
Fan assisted
4
2
2
2
4
2
4
4
2
250
190
190
190
280
190
280
250
190
200
200
200
1
2
190
190
110
70
Function
Level
Temp. (°C)
Time
(minutes)
Static
Fan assisted
Static
Static
1
2
1
1
230
190
220
200
Function
Level
Temp. (°C)
Circulaire
2
180
Function
Level
Temp. (°C)
Fan assisted
Fan assisted
Fan assisted
1
1
1
280
280
230
2
2
2
80
35
40
45
PASTA/RICE
Subcategory
Lasagne
Paella
Pasta bake
Quiche
Cooking
-
Weight
(Kg)
2
0.5
2
0.5
35
25
40
30
PIES/FLANS
Subcategory
Soufflé
Cooking
-
Weight
(Kg)
0.5
Time
(minutes)
25
PIZZA
Subcategory
Pan baked pizza
Stone baked pizza
Cooking
fresh
frozen
Weight
(Kg)
1
0.5
0.3
Time
(minutes)
7
4
6
29
EN
Use
Use
SLOW COOKING
Subcategory
Cooking
rare
medium
well done
-
Beef
Lamb
Pork
Veal
Weight
(Kg)
1
1
1
1
1
1
Function
Level
Temp. (°C)
Static
Static
Static
Turbo
Turbo
Turbo
2
2
2
2
2
2
90
90
90
90
90
90
Function
Level
Temp. (°C)
Grill
Circulaire
Fan assisted
Turbo
4
2
2
2
250
170
220
200
Time
(minutes)
105
300
380
360
330
360
VEGETABLES
Subcategory
Mixed vegetables
Potatoes
Cooking
grilled
roasted
frozen
roasted
Weight
(Kg)
0.5
1
0.5
1
The cooking times in the table refer
to the food indicated in the recipe
and are a guide only; they may
vary depending on personal taste.
The tables give the factory-set
data. To reset a predefined
program with the original settings
after it has been modified, just
enter the data given in the table
above.
If ECO logic mode (see 3.8
Personal recipes) has been
activated, cooking times or
preheating times may vary.
30
Time
(minutes)
25
45
13
40
Use
3. Select the weight
EN
3.8 Personal recipes
This menu allows you to enter a personal
recipe with the parameters you wish to use.
On first use, the appliance will only offer to
let you add a new recipe. After storing your
recipes, these will then be available in the
relative menu.
Up to 10 personal recipes can be
stored.
4. Select the cooking time
Adding a recipe
1. Select “add” from the personal recipes
menu.
5. Select the temperature
2. Select the function the recipe is to use by
turning the control knob.
6. Select the shelf
31
Use
7. You must press the return knob to save
the recipe. Pressing the control knob will
return to point 2 of the change sequence.
8. Set the name of the recipe: you can
choose characters by pressing the
control knob. The
character deletes
the previous letter. Press to confirm the
displayed character.
10. If the changes are confirmed the
display will show confirmation of this.
Starting a personal recipe
1. Select a previously saved personal
recipe with the control knob (in the
example, a recipe for “duck” has been
saved).
The recipe name can contain
maximum 10 characters, including
spaces.
In order to be able to save the
recipe, the name must contain at
least one character.
2. Select the “start” option from the
submenu.
9. After entering the name of your recipe,
press the return knob to confirm or cancel
the information you have entered. Select
“YES” if you wish to store the recipe.
3. Cooking will start with the parameters
previously set for the recipe.
If you select “NO”, you will lose all
changes made.
32
During cooking it is always
possible to modify the temperature
and cooking time, but this will not
be saved to the recipe for future
use.
Changing a personal recipe
1. Select a previously saved personal
recipe with the control knob (in the
example, a recipe for “duck” has been
saved).
Delay cooking
1. Select a personal recipe.
2. Select the “Delay cooking” option from
the submenu.
3. Select the end of cooking time with the
control knob. The
symbol flashes.
2. Select the change option from the
submenu.
Deleting a personal recipe
1. Select a personal recipe.
2. Select the “Delete” option from the
submenu.
3. Confirm the deletion. Select YES to
permanently delete the recipe.
3. Repeat the steps given in the “ Adding a
recipe” chapter, starting from point 2.
33
EN
Use
Use
3.9 Settings
The product is set using this menu.
Control lock
Allows the appliance to automatically lock
the controls after one minute of normal
operation without any intervention from the
user.
To temporarily release the lock during
cooking, hold the return knob down for 3
seconds. One minute after the last setting
the lock will become active again.
Language
Sets the interface language from those
available.
Touching or varying the position of
the control and return knobs, the
display will show a warning for
two seconds.
Clock
Sets the time displayed.
1. Turn the control knob right or left to set the
hour.
2. Press the control knob to move to setting
the minute.
3. Turn the control knob right or left to set the
minute.
4. Press the return knob to confirm.
34
Demo mode
This mode allows the appliance to
deactivate all heating elements, while
keeping the control panel active.
Sound
Whenever one of the knobs is pressed, the
appliance beeps. This setting disables these
sounds.
If the mode is active, “demo
mode” will be shown on the
display.
To use the appliance normally, set
this mode to OFF.
Eco-Logic
This mode allows the appliance to limit the
power used. The
symbol will appear
on the display if this option is enabled.
Activating eco-logic mode means
that preheating and cooking times
may be extended.
35
EN
Use
Use
4 Cleaning and maintenance
4.1 Instructions
Improper use
Risk of damage to surfaces
• Do not use steam jets for cleaning the
appliance.
• Do not use cleaning products containing
chlorine, ammonia or bleach on steel
parts or parts with metallic finishes on the
surface (e.g. anodizing, nickel- or
chromium-plating).
• Do not use abrasive or corrosive
detergents on glass parts (e.g. powder
products, stain removers and metallic
sponges).
• Do not use rough or abrasive materials
or sharp metal scrapers.
4.4 Food stains or residues
Do not use metallic sponges or sharp
scrapers as they will damage the surfaces.
Use ordinary non-abrasive products with
the aid of wooden or plastic utensils if
necessary. Rinse thoroughly and dry with a
soft cloth or a microfibre cloth.
Do not allow residues of sugary foods (such
as jam) to set inside the oven. If left to set for
too long, they might damage the enamel
lining of the oven.
4.5 Removing the door
For easier cleaning, the door can be
removed and placed on a canvas.
To remove the door proceed as follows:
1. Open the door completely and insert two
pins into the holes on the hinges
indicated in the figure.
4.2 Cleaning the surfaces
To keep the surfaces in good condition,
they should be cleaned regularly after use.
Let them cool first.
4.3 Ordinary daily cleaning
Always use only specific products that do
not contain abrasives or chlorine-based
acids.
Pour the product onto a damp cloth and
wipe the surface, rinse thoroughly and dry
with a soft cloth or a microfibre cloth.
36
2. Grasp the door on both sides with both
hands, lift it forming an angle of around
30° and remove it.
Use
3. To reassemble the door, put the hinges in
the relevant slots in the oven, making sure
that grooved sections A are resting
completely in the slots. Lower the door
and once it is in place remove the pins
from the holes in the hinges.
EN
4.7 Removing the internal glass
panels
For easier cleaning the door internal glass
panels can be disassembled.
1. Remove the internal glass panel by
pulling the rear part gently upwards,
following the movement indicated by the
arrows (1).
2. Then, pull the front part upwards (2). In
this way, the 4 pins attached to the glass
detach from their housings in the oven
door.
3. Some models have an intermediate glass
panel. Remove the intermediate glass
panel by lifting it upwards.
4.6 Cleaning the door glazing
The glass in the door should always be kept
thoroughly clean. Use absorbent kitchen
roll. In case of stubborn dirt, wash with a
damp sponge and an ordinary detergent.
We recommend the use of
cleaning products distributed by
the manufacturer.
37
Cleaning and maintenance
4. Clean the external glass panel and the
panels previously removed. Use
absorbent kitchen roll. In case of
stubborn dirt, wash with a damp sponge
and neutral detergent.
5. Refit the panels in the reverse order in
which they were removed.
6. Reposition the internal glass panel. Take
care to centre and insert the 4 pins into
their housings in the oven door by
applying slight pressure.
4.8 Cleaning the inside of the oven
For the best oven upkeep, clean it regularly
after having allowed it to cool.
Take out all removable parts.
Clean the oven racks with warm water and
non-abrasive detergent. Carefully rinse and
dry damp parts.
The oven should be operated at
the maximum temperature for
about 15-20 minutes after the use
of specific products, to burn off the
residues left inside the oven.
For easier cleaning, remove the
door.
38
Removing racks/trays support frames
On pizza models only:
Removing the guide frames enables the
sides to be cleaned more easily. This
operation should be performed each time
the automatic cleaning cycle is used (on
some models only).
To remove the guide frames: Pull the frame
towards the inside of the oven to unhook it
from its groove A, then slide it out of the
seats B at the back.
When cleaning is complete, repeat the
above procedures to put the guide frames
back in.
Remove in sequence the pizza plate cover
(1) and the base (2) on which it is placed.
The base has to be lifted a few millimetres,
then pulled outwards.
Lift the end of the lower heating element (3)
a few centimetres and clean the oven base.
Put the pizza plate base back in place,
pushing it in until it hits the back of the oven,
and push it down so that the heating
element plate is embedded into the base
itself.
39
EN
Cleaning and maintenance
Cleaning and maintenance
4.9 Vapor Clean: assisted oven
cleaning (on some models only)
Vapor Clean is an assisted
cleaning procedure which
facilitates the removal of dirt.
Thanks to this process, it is possible
to clean the inside of the oven very
easily. The dirt residues are
softened by the heat and water
vapour for easier removal
afterwards.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
• Carry out assisted oven cleaning
operations only when the oven is cold.
• For pizza models: Place a tray on the
bottom of the oven.
• Pour approximately 40 cl of water into
the tray. Make sure it does not overflow
out of the cavity.
Preliminary operations
Before starting the Vapor Clean function:
• Completely remove all accessories from
inside the oven. The upper guard can be
left inside the oven.
• For multifunction models: Pour approx.
40 cl of water onto the floor of the oven.
Make sure it does not overflow out of the
cavity.
40
• Spray a water and washing up liquid
solution inside the oven using a spray
nozzle. Direct the spray against the side
walls, upwards, downwards and
Cleaning and maintenance
2. The duration and temperature of the
cleaning cycle will appear on the
display.
EN
towards the deflector.
3. Press the control knob to start the cycle.
• Close the door.
We recommend spraying approx.
20 times at the most.
Vapor Clean setting
If the internal temperature is
greater than that required for the
Vapor clean function, the cycle will
be stopped immediately and
“Internal temperature unsafe,
please wait until the oven is cool”
will appear on the display. Leave
the appliance to cool down before
activating the assisted cleaning
cycle.
4. A buzzer will indicate the end of the
Vapor Clean cycle.
The temperature and time
parameters cannot be modified by
the user.
1. Select the Vaporclean cleaning function
from the special functions menu.
41
Cleaning and maintenance
End of the Vapor Clean cycle
5. Open the door and wipe away the less
stubborn dirt with a microfibre cloth.
6. Use an anti-scratch sponge with brass
filaments on tougher encrustations.
7. In case of grease residues use specific
oven cleaning products.
8. Remove the water left inside the oven.
For improved hygiene and to avoid food
being affected by any unpleasant odours,
we recommend that the oven is dried using
a fan assisted function at 160°C for
approximately 10 minutes.
We recommend wearing rubber
gloves for these operations.
For easier manual cleaning of the
parts difficult to reach, we
recommend removing the door.
42
4.10 Pyrolytic: automatic oven
cleaning
Pyrolytic is an automatic hightemperature cleaning procedure
which causes dirt to dissolve.
Thanks to this process, it is possible
to clean the inside of the oven very
easily.
Pyrolytic function setting
1. Select the pyrolytic or eco pyrolytic
option from the special functions menu.
Improper use
Risk of damage to surfaces
• Remove any food residues or large spills
from previous cooking operations from
the inside of the oven.
• Switch off the burners or electric hot
plates of the hob installed above the
oven.
Preliminary operations
Before starting the pyrolytic cycle:
• Clean the internal glass panel following
the usual cleaning instructions.
• For very stubborn encrustations spray an
oven cleaning product onto the glass
(read the warnings on the product);
leave for 60 minutes, then rinse and dry
the glass using kitchen roll or a microfibre
cloth.
• Completely remove all accessories from
inside the oven.
• Remove the racks/trays support frames.
• Remove the upper guard (where
present).
• Close the door.
2. Turn the control knob to set the cleaning
cycle duration from a minimum of 2 hours
to a maximum of 3 hours (except for the
function whose duration is 120
minutes).
3. Press the control knob to start the
pyrolytic cycle. The
symbol will now
be lit solidly.
Recommended pyrolytic cycle
duration:
• Light dirt: 2 hours.
• Medium dirt: 2 ½ hours.
• Heavy dirt: 3 hours.
43
EN
Cleaning and maintenance
Cleaning and maintenance
Pyrolytic
4. The display shows “cleaning in progress”
and the remaining time to indicate that
the appliance is carrying out the
automatic cleaning cycle. Two minutes
after the pyrolytic cycle has started the
door is locked (the door lock indicator
light
comes on) by a device that
prevents the door from being opened.
It is not possible to select any
function once the door lock device
has been activated.
5. At the end of the pyrolytic cycle, the door
remains locked as long as the
temperature inside the oven returns to
safety levels. Wait for the oven to cool
down and collect the residues deposited
inside with a damp microfibre cloth.
During the first pyrolytic cycle,
unpleasant odours may occur due
to the normal evaporation of oily
manufacturing substances. This is
an absolutely normal phenomenon
which disappears after the first
pyrolytic cycle.
During the pyrolytic cycle the fans
produce a more intense level of
noise due to a greater rotation
speed. This is an absolutely normal
operation, intended to provide
more effective heat dispersal. At
the end of the pyrolytic cycle, the
fans will continue to operate for
long enough to avoid overheating
the walls of adjacent units and the
front of the oven.
If the pyrolytic cycle gives
unsatisfactory results at minimum
duration, it is recommended to set
a longer time for successive
cleaning cycles.
44
Cleaning and maintenance
EN
Setting of programmed pyrolytic cycle
It is possible to program the pyrolytic cycle
start time like all other cooking functions.
6. After selecting the pyrolytic cycle
duration, press the control knob. The
display shows the current time and the
symbol comes on.
7. Turn the control knob to set the time you
wish the pyrolytic cycle to finish.
8. After a few seconds, the
and
indicator lights remain lit steadily and the
appliance waits for the set start time to
start the cleaning cycle.
It is not possible to select any
function once the door lock device
has been activated. It remains
possible, however, to switch off the
appliance using the specific
controls.
45
Cleaning and maintenance
4.11 Extraordinary maintenance
Live parts
Danger of electrocution
• Disconnect the oven power supply.
Replacing the internal light bulb
1. Completely remove all accessories from
inside the oven.
2. Remove the racks/trays support frames.
3. Remove the bulb cover using a tool (e.g.
a screwdriver).
4. Slide out and remove the lamp.
Do not touch the halogen lamp
directly with your fingers, but wrap
it in an insulating material.
46
5. Replace the lamp with one of the same
type (40W).
6. Refit the cover correctly, so that the
moulded part of the glass is facing the
door.
7. Press the cover completely down so that
it attaches perfectly to the bulb support.
What to do if...
The display is completely off:
• Check the mains power supply.
• Check whether an omnipolar switch
upstream of the appliance supply line is
in the “ON” position.
The appliance does not heat up:
• Check whether it has been set in
“showroom” mode (for further details see
“Settings”).
The controls do not respond:
• Check whether it has been set to “control
lock” mode (for further details see
“Settings”).
The cooking times are longer than those
indicated in the table:
• Check whether it has been set to “ecologic” mode (for further details see
“Settings”).
After the automatic cleaning cycle
(pyrolytic) it is not possible to select a
function:
• Verify whether the door lock has
deactivated. If it has not, the oven has a
safety device that does not allow
functions to be selected while the door
lock is active. This is because the
temperature inside the oven is still too
high to permit any type of cooking.
The display shows “Error 4”:
• The door lock has not properly attached
to the door. This might be because the
door was accidentally opened during
the door lock activation. Switch the oven
off and on again, waiting a few minutes
before selecting a new cleaning cycle.
If the door is opened during a fan assisted
function, the fan stops:
• This is not a fault. It is a normal operation
of the appliance, useful when cooking
foods in order to avoid excessive heat
escaping. When the door is closed, the
oven will return to normal operation.
If the problem has not been
resolved or in the case of other
types of fault, contact your local
technical support centre.
If other Error XX error messages
are indicated:
note down the error message,
function and set temperature and
contact your local technical
support centre.
47
EN
Cleaning and maintenance
Installation
5 Installation
5.1 Electrical connection
Power voltage
Danger of electrocution
• Have the electrical connection
performed by authorised technical
personnel.
• The appliance must be connected to
earth in compliance with electrical
system safety standards.
• Disconnect the main power supply.
General information
Check the grid characteristics against the
data indicated on the plate.
The identification plate bearing the
technical data, serial number and brand
name is visibly positioned on the appliance.
Do not remove this plate for any reason.
The appliance works at 220-240 V~.
Use a H05V2V2-F type three-core cable (3
x 1.5 mm2 cable, referring to the cross
section of the internal conductor).
Perform the ground connection using a wire
that is 20 mm longer than the other wires.
Fixed connection
Fit the power line with an omnipolar circuit
breaker in compliance with installation
regulations.
The circuit breaker should be located near
the appliance and in an easily reachable
position.
Connection with plug and socket
Make sure that the plug and socket are of
the same type.
Avoid using adapters and shunts as these
could cause overheating and a risk of
burns.
5.2 Cable replacement
Power voltage
Danger of electrocution
• Disconnect the main power supply.
1. Unscrew the rear casing screws and
remove the casing to access the terminal
board.
2. Replace the cable.
3. Make sure that the cables (for the oven
or any hob) follow the best route in order
to avoid any contact with the appliance.
48
Installation
Heavy appliance
Danger of crush injuries
Secure the appliance to the piece of
furniture using screws.
EN
5.3 Positioning
• Place the appliance into the piece of
furniture with the aid of a second person.
Pressure on the open door
Risk of damages to the appliance
• Never use the oven door to lever the
appliance into place when fitting.
• Avoid exerting too much pressure on the
oven door when open.
Cover the bushings with the covers
removed previously.
Heat production during appliance
operation
Risk of fire
• Check that the piece of furniture material
is heat resistant.
• Check that the piece of furniture has the
required slots.
Appliance overall dimensions (mm)
Fastening bushings
Remove the bushing covers inserted on the
oven front.
Mount the appliance into the recess.
49
Installation
Mounting under worktops (mm)
Make sure that the piece of
furniture rear/bottom part has an
opening of approx. 60 mm.
50
Mounting into a column (mm)
Make sure that the piece of
furniture top/rear part has an
opening approx. 35-40 mm deep.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement