CDN Easy Access and Stools Price Guide

CDN Easy Access and Stools Price Guide
HEALTHCARE
Effective June 1, 2015
Price and Specification Guide
CANADA
HEALTHCARE SOLUTIONS
TABLE OF CONTENTS
GENERAL INFORMATION
2
4
5
6
6
7
8
8
9
10
General Information
Finishes & Laminates
Laminate Technical Specifications
High-Pressure Laminate Technical
Specifications
Solid Surface Technical Specifications
Upholstery Fabrics & Leather
Luxe Faux Leather
Graded-In Upholstery Programs
Customer’s Own Material - C.O.M.
KrugExpress Program
PRICING & SPECIFICATIONS
Benches
201
202
208
218
221
Tate
Zola
Jordan
Carlyle
223
224
230
238
241
Jordan Active Patient
Jordan
Jordan Bariatric
Jordan Sleep Recliner
245
246
Jordan
250
251
258
241
Amelio
Jordan Lounge Sleeper
Jordan Sleep Recliner
269
270
286
14
Solis
Zola
Karma
293
294
300
307
309
313
317
Karma
Cressida
Leyton
Jordan
Solis
Zola
Recliners
Gliders
12
20
24
25
28
30
33
36
Guest & Multi-Purpose Seating
Karma
Cressida
Cressida Bariatric
Solis
Solis Bariatric
Jordan
Jordan Bariatric
Corfu
42
43
44
46
47
49
50
Patient Seating
Cressida
Cressida Bariatric
Solis
Solis Bariatric
Jordan
Jordan Bariatric
53
54
70
84
Multiple Seating
Cressida
Solis
Jordan
322
323
Infusion Bays
Tranquility
100
Easy Access and Stools
101
70
84
Karma
Solis
Jordan
340
341
365
Juno
Trevisa
109
110
121
131
141
150
194
199
Lounge Seating
Leyton (Bariatric Rated)
Cressida
Zola
Zola Bariatric
Zola Privacy
Jordan
Carlyle
11
Sleepers
Behavioral Health
Occasional Tables
Casegoods
HEALTHCARE | CANADA | 1
GENERAL INFORMATION
Terms and Conditions
Net 30 days on approved credit. A late payment charge of 1% per
month will be applied on overdue invoices. This charge will be
pro-rated to the number of days past 30 days that the invoice is
overdue. All applicable sales taxes are extra. Distribution of this price
list does not in itself constitute an offer to sell. Orders can be
received only from authorized Krug dealers. Acceptance of any order
and terms of sale may be established at the discretion of Krug.
Deposits are required on orders received from new accounts as well
as on large or special orders. Krug reserves the right to
discontinue designs, or to change designs, construction, prices, or
materials without notice.
Customer Service Hours
Please note customer service hours are:
8:30 am to 5:00 pm est
1.888.578.KRUG
1.519.748.5177 fax
Order Acknowledgements
Each order will be acknowledged via e-mail or fax. This acknowledgement
is the final agreement between Krug and the customer, superseding
all previous communications regarding the purchase order. Where
there is a discrepancy on a purchase order between a product code
and a description, Krug will make every effort to resolve the discrepancy,
but will be ruled by the product code ordered. Please check all
acknowledgements for accuracy, and advise Krug of any
discrepancies with a purchase order.
Cancellation
A cancellation can be made only by expressed agreement with Krug.
A cancellation fee may be incurred for restocking.
Dimensions
Dimensions are in inches and approximate, and subject to change
without notice. Contact Customer Service if dimensions are critical.
Blanket Wrapping
Krug will blanket wrap larger seating orders at customer’s request.
Please indicate on your purchase order and contact Customer
Service.
Storage Charges
Krug reserves the right to assess a nominal storage charge if a
customer does not accept shipment of an order within a week of the
ship date.
Contact Information
Phone: 1.888.578.KRUG (5784)
Fax: 1.519.748.5177
Purchase Order Fax: 1.888.236.4783
Purchase Order E-mail: [email protected]
Web: www.krug.ca
E-mail: [email protected]
Installation Support
For assistance please contact Technical Support at 1-888-578-5784 x216
or e-mail [email protected] and you will be directed to the
appropriate installation support person.
Pricing
Krug endeavors to ensure that all prices in this price list reflect
accurately our current prices. However, errors do occur and will be
rectified through notices to the field. Krug’s website will always have
the current list price. Krug reserves the right to acknowledge pricing
that may be different from the price list.
2 | CANADA | HEALTHCARE
Warranty
Krug warrants it’s products to be free from defects in materials and
workmanship for the lifetime of their use. This warranty is
applicable to products in use by their original purchaser. This
warranty does not apply to components and materials not
manufactured by Krug: these are subject to the specific warranties
of their manufacturers (if any). Repairs or replacement of any defect
covered under this warranty by Krug will be made, at our option and
method, at no charge to the original purchaser. Krug’s judgement is
final and binding with respect to the nature or cause of defects or
damage, and the necessity or manner of repair or replacement.
This warranty does not apply to defects or damage resulting from:
• normal wear and tear occurring with the use of the product
• negligence, misuse, excessive use, alteration, improper cleaning
or repair
• substitution or use of incorrect or unauthorized components or
material
• handling or installation that is incorrect, or that causes damage or
defect
• damage incurred by a freight carrier other than Krug
• wearing of finishes and fabrics, and normal variations in materials
(including dye lot variations)
• properties of natural materials, including wood and leather
• exposure to environments with uncontrolled temperature and
humidity (products must be transported, stored and used in climatecontrolled conditions)
Export Packaging
Krug is pleased to provide the option for export packaging on all our
products, to provide additional protection from damage.
Export packaging is provided at an upcharge of 5% of the net
selling price per item.
Export Packaging is STRONGLY RECOMMENDED for:
(A) all shipments outside of the lower 48 states and Canada.
(B) all shipments that will be held in storage for an extended period
prior to installation.
Important: Please note that Krug will not be responsible for damage
claims on product shipped or stored in the above conditions but
where export packaging has not been utilized.
Please contact Customer Service for specifications or any other
assistance regarding export packaging.
Freight Terms and Conditions
1. All product is shipped FOB the Krug factory. Freight is either
pre-paid to the destination (dealer’s dock or territorial warehouse,
where available) or not pre-paid, depending on established
customer specific freight terms.
2. Docks at the selected delivery location must be equipped to handle
a 53’ trailer. If a dock is inadequate for delivery by Krug, Krug will
re-deliver to another local location and any additional costs will be
charged to the customer.
3. When a Krug territorial warehouse (where available) is selected as
the default delivery location, it is understood that Krug pays freight
cost to the territorial warehouse only, and no further. The
Customer is responsible for all charges from this point.
4. For all deliveries, it is understood that Krug or its agent is making a
dock delivery only (equipped to handle a 53’ trailer), and any further
work of truck unloading, delivery beyond the dock, installation, and
removal of packaging is not authorized or paid for by Krug.
GENERAL INFORMATION
Freight Terms and Conditions, con’t.
5. Drop shipments to the installation site, and timed deliveries, are
available on larger shipments (full truckloads or slightly less) at no
additional charge. Drop shipments or timed deliveries for smaller
shipments may not be available, or if available will require a
surcharge. Deliveries on an after hours basis, or on weekends, or
any other special requirements, may be subject to a surcharge.
Location and contact information, and the requested time of
delivery, is required at least one week prior to the acknowledged
shipment date. If this information is not provided one week in
advance, or if the location or time of the drop shipment is
changed less than one week in advance, a surcharge may be
applied, and/or the drop shipment may not be scheduled. For
deliveries requested Monday to Thursday after 5:00 pm, please
apply a surcharge of $250/shipment. For deliveries requested
Monday to Friday before 7:00 am, please apply a surcharge of
$250/shipment. For deliveries requested Friday (after 3:00 pm) or
weekends, please apply a surcharge of $500/shipment. (local times).
6. For all deliveries - whether to the Customer location or drop
shipment - any circumstances that result in the delay of our
carrier (including unsuitable receiving facilities, or facilities not
open or available), service charges will be applied at the rate of
$75/hour. Where re-delivery is necessary because of these
circumstances, the full cost of re-delivery will be charged. If Less
Than Truck Load is delivering, one hour is allocated to unload.
Any additional time required to unload after the first hour is
$75/hour. If a Truck Load is delivering the order, three hours is
allocated to unload. Any additional time required to unload is
$75/hour. Direct deliveries to site for large orders are possible,
(must exceed $60,000 net), and accommodate 48 - 53’ trailers.
Krug is responsible for delivery to the approved delivery address.
If an address change is required, this must be authorized by Krug
5 business days prior to ship date. Any additional delivery costs
incurred after this time will be charged to the customer. If a
problem arises with a Krug product after the expiration of the
limited warranty period, Krug will exercise its best efforts to
achieve the satisfaction of the customer in a manner that is fair
to all concerned.
Product Strength and Durability Testing
All Cressida products have been thoroughly tested, and exceed the
testing requirements of ANSI/BIFMA X5.1 2002.
Specific test results and documentation are available on request.
Customer Satisfaction
It is the primary goal of Krug and our staff to ensure the complete
satisfaction of our customers with our products and performance.
If a problem arises with a Krug product after the expiration of the
limited warranty period, Krug will exercise its best efforts to achieve
the satisfaction of the customer in a manner that is fair to all
concerned.
Damaged Shipments
All Krug product is well engineered, carefully inspected, and expertly
loaded onto our trucks at our Distribution Center. If you receive any
damaged freight, we ask that you do not refuse the shipment. Krug
is not responsible for damage to goods that occurs in transit or
storage. It is the purchaser and/or receiver’s responsibility to examine
the goods upon receipt and to notify Krug of any damages, overages
or shortages. Any discrepancies should be noted on the Bill of Lading.
The delivering carrier will not accept responsibility for shortages or
damages if signed ‘‘clear’’. Notification of concealed damage claims
must be made to Krug Distribution within 5 days of delivery, along
with digital pictures if available. All product and packaging must be
available for inspection. Krug liability ceases after 5 business days
and Krug will not be responsible for concealed damages if
shipments are left unopened. Krug is not responsible for the condition
of product that is stored or installed in an environment where
temperature and humidity are not controlled.
Field Product Report Authorization
Krug's written authorization, in the form of an FPR number, must be
obtained prior to incurring charges of any kind if Krug is expected to
pay these charges. This includes authorization for field repairs and
replacements, installation and delivery charges. Krug reserves the
right to have its representative inspect product related to any
request for such authorizations, prior to that authorization being
provided. Deductions from invoices paid for any charges to Krug,
without prior written authorization in the form of an FPR, will not be
accepted. Digital photographs may be required to complete the FPR
process.
Returns
No merchandise may be returned without Krug’s prior written
consent. In the event of an authorized return, a Field Product Report
(FPR) number will be issued, and a restocking charge will apply.
Return transportation charges must be prepaid. Unauthorized
returns will not be accepted and will be returned freight collect. All
merchandise being returned must be properly packaged in its
original or comparable replacement packaging to ensure protection
of the product during handling and transportation. Returns on orders
duplicated by the customer must be received in their original
packaging to be accepted. Product being returned where Krug has
authorized its liability for replacement or repair will be thoroughly
inspected on its return, and the results compared to the reason for
the return stated on the FPR. Any discrepancies, such as additional
damage, signs of usage, missing parts, etc., will result in an adjustment
to the amount of credit issued.
Custom Capabilities
Over 15% of our orders involve some type of custom work, and we
invite our customers to make use of our extensive capabilities.
These include:
1) Dimensional customization of standard size products
2) Custom finishes
3) For larger orders, completely custom-designed products, as well
as non-standard wood species can be specified.
Custom orders may require additional production lead times. Contact
Engineering at the e-mail address [email protected]
Care and Maintenance Leather
Leather is a natural product and requires very little care during use.
Most stains can be removed with a clean dry cloth. For stubborn
spots and stains, use a mild non-detergent cleaner, rinse well and let
air dry naturally. Do not use saddle soap, cleaning solvents,
furniture polish, oils, varnish, abrasive cleaners, soaps or ammonia
waters.
Fabric Upholstery
Professional upholstery cleaning is recommended.
Flammability Standards for Krug Textiles - Upholstery Program
• Passes State of California Technical
Bulletin CAL 117-2013
HEALTHCARE | CANADA | 3
FINISHES & LAMINATES
Wood Finishes for Seating &
Occasional Tables
Natural Characteristics of Wood
Standard wood finishes are:
Wood is a natural product with inherent color variations that will never be fully
mitigated by the finishing process. Please anticipate variation in colors within a single unit,
from piece to piece, and from Krug wood finish samples. If a very close match is required,
a sample must be provided with the order and an upcharge will apply. Exact color matches
are not possible.
Finishes on Beech
Appalachian Cherry
American Cherry
Imperial Cherry
Light Cherry
Medium Cherry
Natural Cherry
Sable Cherry
Standard Cherry
Light Oak
Harvest Oak
Mahogany
Mellow Oak
Espresso
Cordovan Walnut
Natural Walnut
Regular Walnut
Dark Walnut
Clear Beech
Medium Anigre
Custom Wood Finishes
Add 10% list to your order for special finishes a minimum upcharge is $500 list per finish
per order. (For example, on all orders up to $5000 list an upcharge of $500 will apply, on
orders $5000 and up add 10% list to order.)
Special finish upcharges on seating products are calculated on a grade 1 value. For orders
with special finishes, a sample that is a minimum 3” by 3” must be received with the order.
Special finishes may add additional lead time to production schedules. Since wood is a
natural product, some variations in grain, color and stain acceptance will occur. In our
finishing processes, we try to minimize variations, but some variation between samples
and finished goods should be anticipated.
Dual Finishes
Add 10% list per item if specifying dual finish.
Standard Wood Finishes
No upcharge will be applied when specifying a finish available as standard on one species
onto maple seating and occasional tables. Clear finishes are not available on other species
since they are a clear finish on top of the natural veneer color.
Finishes on Maple
Clear Maple
Honey Maple
Wheat Maple
METAL FINISHES
Silver Metallic Standard - No Upcharge
Solis silver metallic frames are available with an anti-microbial finish for an upcharge of $44 list per chair or table.
Additional Solis Frame Finishes are available for an upcharge of $44 list per seat/ table.
Available colors are:
• White • Parchment • Sand • Taupe • Warm Grey • Cool Grey • Black
For all metal finishes other than Silver Metallic, there is a minimum order quantity of 30 units per color. The anti-microbial finish is included in
the additional finish up-charge. Upcharges for order quantities less than 30 units per color or custom metal finishes, please contact Customer
Service to obtain a quote.
IN-STOCK LAMINATES
Krug’s in-stock laminates are available in 16 laminate selections. There are 8 wood grain laminates, 4 solid color laminates in a selection of
popular shades and 4 Exotic laminates offering a distinguished appearance. Exotic laminates are subject to minimum order quantities and
extended lead times. Polymer edges will automatically match the laminate selected.
Wood Grain
Name & Number
Supplier
Polymer Edge Names
Corretto Cherry HP-288-N
Sugarloaf Maple T630
Mocha Cherry HP-341-N
Monticello Maple 7925
Nightfall WX421-N
Samba Cherry T460
Shiraz Cherry T472
Pionite
Arborite
Pionite
Wilsonart
Pionite
Arborite
Arborite
Corretto Cherry
Sugarloaf Maple
Mocha Cherry
Monticello Maple
Nightfall
Samba Cherry
Shiraz Cherry
Exotic Laminate
Name & Number
Supplier
Polymer Edge Names
Backwoods Sycamore HP689-N
Edgewood Sycamore HP690-N
Gunstock Walnut WW971-N
Thunderstorm HP-359-N
Pionite
Pionite
Pionite
Pionite
Backwoods Sycamore
Edgewood Sycamore
Gunstock Walnut
Thunderstorm
Solid Laminates
Name & Number
Supplier
Polymer
Edge Names
Almond T445
Black T203
Shadows T201
White D354-60
Pionite
Arborite
Arborite
Wilsonart
Almond
Black
Fog
White
Non-Stocked Laminates
For specific lead time and application questions, please contact Krug Customer Service for your requirement. Upcharges will be applicable
for non-stocked laminates, depending on their cost. Non-stocked laminates may be subject to minimum orders sizes.
HEALTHCARE LAMINATES
• Hardrock Maple • Candlelight • Mocha Cherry • Antique White • Samba Cherry • Shiraz Cherry
4 | CANADA | HEALTHCARE
LAMINATE - TECHNICAL SPECIFICATIONS
(All references to “Laminate” in this price list mean thermofused melamine. This material is also known as low-pressure laminate or LPL)
NEMA STANDARDS *
(LD 3-2005)
KRUG’S
PROGRAM
Measure of the ability of the surface to keep its design
or color under abrasive wear
400 cycles
400 cycles - Solid Colors
125 cycles - Prints
Appearance
Presence of visual defects on decorative surface
No surface defects
No surface defects
Scratch Resistance
Measure of the ability of decorative surface to scratch
by diamond tip tool
n/a
3.4 N
Stain Resistance
Measure of the ability of the decorative surface to resist
to stain when exposed to 15 household products
(see list below of products tested)
1 to 10 no effect
11 to 15 moderate (difficult
to perceive the stain)
1 to 10 no effect
11 to 15 moderate
Cleanability
Measure of the ability of a decorative surface to be
cleaned when exposed to 15 soiling agents (See list below)
Maximum 20
Maximum 20
Light Resistance
Measure of the ability of a decorative surface to retain
its color when exposed to a light source close to sunlight
Slight
Slight
High Temperature
Resistance
Measure of the ability of a decorative surface to maintain
its color and aspect when exposed to high temperature
Slight
Slight
Radiant Heat
Resistance
Measure of the ability of a decorative surface to resist
any damage when exposed to a radiant heat source
No effect after
60 seconds
No effect after
60 seconds
Boiling Water
Resistance
Measure of the ability of a decorative surface to resist
any damage when exposed to boiling water for 20
minutes
No effect
No effect
Impact Resistance
Measure of the maximal falling height of a steel ball
that does not cause fracture to the decorative surface
381 mm/n
15 in
381 mm/n
15 in
Fire Resistance
Measure of flame spread rating under controlled
conditions
n/a
Class III
Warping
Measure of the maximal departure of the surface
from flatness
n/a
3 mm/m
PROPERTIES
DESCRIPTION
Wear Resistance
STAIN RESISTANCE (see above)
products tested:
STAIN
PREPARATION NOTES
APPLICATION
1. Distilled Water
As received
Apply 2 drops (6 mm spot) cover with watch glass
2. Ethyl Alcohol Solution
A solution of 50% ethyl alcohol and 50%
distilled water as received
As above
3. Acetone
As received
As above
4. Household Ammonia
As received (non-sudsing type)
As above
5. 10% Citric Acid
A solution of 10% citric acid in distilled water
As above
6. Vegetable Oil
As received
As above
7. Fresh Coffee
1 teaspoon instant coffee per 180 ml
of distilled water
As above
8. Fresh Tea
Brew 1 tea bag per 120 ml distilled
boiling water for 2 minutes
As above
9. Ketchup
As received
As above
10. Yellow Mustard
As received
As above
11. 10% Povidone Iodine
As received
As above
12. Black Permanent Marker
As received
Mark spot (6 mm spot), do not cover
13. #2 Pencil
As received
As above
14. Wax Crayon
As received
As above
15. Black Paste Shoe Polish
As received
Apply (6 mm spot) do not cover
HEALTHCARE | CANADA | 5
HIGH-PRESSURE LAMINATE - TECHNICAL SPECIFICATIONS
(Specifications refer to Krug’s standard high pressure laminates)
PHYSICAL PROPERTIES
NEMA LD3-2005
STANDARD HPLs
Appearance
3.1
No ABC Defects
Light Resistance
3.3
Slight
Cleanability
3.4
20 (maximum)
Stain Resistance (see Products Tested on previous page)
Reagents 1-10
Reagents 11-15
3.4
Boiling Water Resistance
3.5
Slight
High Temperature Resistance
3.6
Slight
Ball Impact Resistance - mm
- in
3.8
762 (minimum)
30 (minimum)
Radiant Heat Resistance - sec
3.10
100 (minimum)
Dimensional Change
Machine Direction - %
Cross Direction - %
3.11
Wear Resistance - cycles
3.13
No Effect
Moderate
1.1 (maximum)
1.4 (maximum)
400 (minimum)
SOLID SURFACE - TECHNICAL SPECIFICATIONS
(Specifications of Solid Surface Materials vary slightly by brand. The following is a typical set of technical specifications.)
PROPERTIES
UNIT
Specific Gravity
g/cm
Tensile Strength
psi
3
RESULT
TEST STANDARD
1.8
5,400
ASTM D 638
psi
1.4x10ASTM D 638
0.42
ASTM D 790
psi
9,200 ASTM D 790
1.38x105
ASTM D 785
92
ASTM D 785
3.04x105
ASTM D785
Gloss (60 Gardner)
5 - 20
ANSI Z124
Color Stability
No Change
NEMA LD3
Wear & Cleanability
Passes
ANSI Z124
Boiling Water Surface Resistance
No Change
NEMA LD3
High Temperature Resistance
No Change
NEMA LD3
Stain Resistance
Passes
Nema LD3
Impact Resistance
No Fracture
Nema LD3
Tensile Modulus
Elongation
% min
Flexural Strength
Flexural Modulus
psi
Hardness (Rockwell)
Thermal Expansion
mm/mc
O
IZOD Impact Strength
ft.lbs/in
0.28
ASTM D256
Water Absorption Weight
%max
0.03
ASTM D 570
Fungi & Bacteria
No Attack
ANSI Z124
Weatherability
No Change
ASTM D 1499
All Colors
NSF
NSF 51
6 | CANADA | HEALTHCARE
Listed
KRUG TEXTILES - UPHOLSTERY FABRICS | LEATHER
Krug Textiles - Fabric Program
Krug Grade 1, 2 and 3 fabrics are also available on a cut yardage basis.
Grade 1
Perk
Vox
Fuse
Expo
Auburn
Cabana
Cedar
Crimson
Dijon
Ebony
Flint
Patriot
Pewter
Regal
Sesame
Walnut
Bark
Black
Cocoa
Downpour
Eco
Frothe
Goldenrod
Honest
Hot
Limelight
Morel
Mystic
Navy
Oat
Par
Ruby
Snap
Turquoise
Azurean
Carmine
Cress
Ginger
Iris
Lunar
Malted
Morel
Pepper
Pimento
Pristine
Saffron
Walnut
Festive
Fog
Latte
Leaf
Lemon
Oasis
Raspberry
Sky
Spirit
Sprout
Tuxedo
Viola
Zest
Epic
Knack
Bangle
Lineup
Azure
Capri
Espresso
Flare
Granite
Jute
Kiwi
Limestone
Pearl
Porcini
Regal
Slice
Steel
Berry
Brisk
Carbon
Dark Roast
Filament
Fresco
Glaze
Reed
Sax
Teak
Wave
Zest
Zing
Baltic
Cork
Granite
Orchid
Sable
Suede
Teak
Baltic
Fern
Pewter
Sandstone
Shadow
Spice
Tranquil
Solace
Current
Clang
Kinney
Almond
Azul
Blaze
Carmine
Celadon
Cinder
Earth
Ebony
Fossil
Gilded
Indigo
Ivory
Mineral
Pear
Peony
Birch
Cadet
Eclipse
Espresso
Moss
Pecan
Plum
Amber
Claret
Clove
Cress
Flint
Malt
Raven
Coffee
Frappe
Glacier
Mineral
Nectar
Steel
Valentine
Grade 2
Grade 3
Krug Textiles - Leather Program
Grade 8
Black
Stone
Sand
K13.1000
K13.3000
K13.5000
Graphite
Espresso
White
K13.4000
K13.8000
K13.9000
Please contact Customer Service for specific information on leathers, available colors and lead times.
HEALTHCARE | CANADA | 7
KRUG TEXTILES | LUXE | FAUX LEATHER
Krug Textiles - Faux Leather Program
Grade 2
White
Cream
Parchment
Sandstone
Vanilla
Taupe
Mocha
Tan
Chestnut
Bisque
Chocolate
Black
Earth
Brick
Wine
Garnet
Rust
Citron
Sprig
Chinchilla
Steel
Grey
Lagoon
Pacific Blue
Navy
Plum
GRADED-IN UPHOLSTERY PROGRAMS
Krug has partnered with several textile brands to grade in their
offerings, designed to provide a wide range of upholstery selections
for our seating products.
Upholstery Samples
If you require additional samples or memos for presentation, please
contact fabric supplier directly.
Upholstery pricing and availability is subject to change without notice.
We grade this upholstery according to the pricing of the fabric
suppliers - when their pricing changes, the Krug grade may change.
Flammability Standards
• Tunnel Test Surface Ratings Class A rating
• Class 1 UFAC
• Passes State of California Technical Bulletin
117-Section E
When placing an order, a Krug customer must specify the complete
upholstery number, along with the appropriate Krug model number and
finish. Krug will supply the complete product at the prices listed.
Orders specifying graded-in upholstery cannot be cancelled once the
upholstery has been ordered.
Upholstery Grades
To determine the price of a product for graded-in upholstery, use the
reference lists located on Krug’s website under - Products - Textiles,
to view the upholstery grade (1-9). Krug is not responsible for the
discontinuation of this upholstery. Please contact Customer Service
for information on upholstery not listed.
Please contact fabric supplier directly for further flammability
information pertaining to specific upholstery.
Special Conditions
Acknowledgements will give the estimated delivery date of the
finished product. Some upholstery is imported, and availability may
affect estimated delivery time. For large projects, please contact
fabric supplier directly for availability of yardage.
When two upholstery selections are specified for use on seating, the
higher grade upholstery price will apply to the order.
High Performance upholstery; Polyurethane, Vinyl or Crypton, is
particularly suitable for healthcare and other intensive-use
environments.
CUSTOMER’S OWN MATERIAL - C.O.M.
Upholstery Cover Yardage Calculation
To calculate yardage required for COM and
other non-standard upholstery cover orders,
please contact Krug Customer Service at
1.888.578.5784.
Unless otherwise stated, upholstery cover
rolls are assumed to be a minimum 54” wide.
Please use the guide below to calculate the
percentage of extra upholstery cover required
to cover large repeats.
2”-14”
15”-19”
20”-27”
28”-36”
FABRIC
Plain
Repeat
Repeat
Repeat
Repeat
54
0%
10%
15%
20%
25%
53-50
16%
20%
25%
30%
35%
48
16%
25%
30%
35%
40%
45
40%
50%
55%
60%
65%
36
50%
60%
65%
70%
75%
8 | CANADA | HEALTHCARE
The repeat is calculated by adding both the
vertical and horizontal measurements together
and then referring to the chart below for
extra yardage required.
CUSTOMER’S OWN MATERIAL - C.O.M.
Customer’s Own Material (COM/COL)
COM/COL must be received three weeks prior to the acknowledged
ship date. Orders with COM/COL not received by the required deadline
will be delayed.
A description of the upholstery cover, including supplier name,
pattern name, upholstery cover name and color number must be
included with the purchase order.
COM/COL testing requires 3 business days and samples are to be
directed to Customer Service. The customer has the option of
providing the sample COM/COL before, at time of order, or once the
sample COM/COL is received. If the customer does not send a sample
for approval in advance of sending actual material, Krug will not be
responsible for the cost of any upholstery cover or other
material that it determines to be unsuitable for the product or our
process.
When the COM/COL upholstery cover is received at Krug, it must
be clearly identified with the upholstery cover name and color, and
tagged with name of the Krug customer and purchase order number.
Krug will inspect all COM/COL upholstery covers when received to
determine if it will be suitable for upholstery. Where Krug feels that
the upholstery cover or leather specified will compromise the quality
or integrity of our products, customers will be contacted to direct
these concerns. Further, Krug reserves the right to refuse to accept
and use any COM upholstery covers or leathers that will compromise
our products in any way that is unacceptable to Krug. Krug cannot
assume responsibility for the durability or tailoring quality of
customer’s own material.
Yardage specified in this price guide is approximate. In the case of
multiple product orders, multiply the number of items by the COM
yardage specified to determine upholstery cover required, unless
otherwise indicated. Additional yardage may be needed if the
material is less than 54” wide, or patterned or striped and requires
matching. All COMs are cut “up the roll” unless otherwise stated by
the customer. All striped upholstery covers will be applied vertically
unless otherwise stated by the customer and after approval by Krug.
Krug will not be responsible for directional or positional
problems with its application of COM material, unless it has been
provided with explicit instructions by the customer. Special instructions
should be sent to Krug Customer Service, including a sample
(or photocopy) of the upholstery cover. Krug is not responsible for
instructions sent with the upholstery cover rolls, or for the method
of upholstery if no instructions have been provided.
Price increases and freight charges to COM/COL acquired on the
customer’s behalf will be passed onto the customer.
Application of Directional Upholstery cover
Some COM upholstery covers will be considered directional by Krug
even though they are not considered directional by the supplier. All
COMs are automatically cut “up the roll” unless otherwise stated
by the customer (please see below).
Standard-Cut
“up the roll”
Non-Standard-Cut
across the roll “railroad”
COM/COL orders cannot be scheduled into production until the
upholstery cover has arrived and inspection is complete.
All packages must be clearly marked ‘‘For Customs Clearance by
Russell A. Farrow Custom Brokers’’.
According to the North American Free Trade Agreement (NAFTA),
goods shipped between the United States and Canada can qualify
for exemption from all duties, or for a reduction in duties, if the goods
can be proven to originate in either the United States, Canada or
Mexico.
Canada Customs requires that a NAFTA Certificate of Origin and a
Commercial Invoice be completed and sent with the upholstery
cover shipment. The Commercial Invoice must clearly state the
description of the upholstery cover, the selling price, the make-up
or content, and the purchaser. The absence of these two documents
will delay the shipments at the U.S./Canada border, thereby potentially
delaying the customer order. If the total value of the shipment is less
than $1200 U.S., Customs will accept a Low Value Statement of
Origin in place of the NAFTA Certificate of Origin. The Low Value
Statement must be signed by a representative of the exporting
company. This statement may either be included on the commercial
invoice or attached to the invoice.
Krug is happy to answer any questions or concerns about
COM/COL shipping procedures and the required documents. Please
contact our Customs Specialist at 1.888.578.5784.
CAL 133 & Moisture Barrier
California Technical Bulletin 133 is a flammability test for seating.
Krug offers a compliance method which, in combination with
non-flammable upholstery covers, may enable the products to meet
certification requirements for this test. This process at the same time
also provides the products with a Moisture Barrier - a treatment that
helps to prevent the passage of liquids and moisture to inside of
upholstered components - thereby conferring sanitary and anti-infection
benefits. So when CAL 133 is specified, the product also automatically
has a Moisture Barrier, and when a Moisture Barrier is specified, the
product also features the compliance method and low flammability
features of CAL 133.
The application of this upcharge and the compliance method does
not mean that the specific configuration of product and upholstery
cover are tested and officially certified as being CAL 133 compliant.
If official certification is required, Krug will provide this (through an
independent certified testing laboratory) at a charge of $700 per
item, plus the cost of the product to be tested. Lead time for
certification testing is typically 4-8 weeks. Krug assumes no responsibility
for the testing of our products in combination with upholstery covers,
or for the results of any testing conducted. Some specific configurations
of product and upholstery have already been tested. Please contact
Customer Service for additional information.
C.O.L. Yardage
To calculate C.O.L. yardage required, please use the following
conversions based on COM yardage: Leather must be ordered in
square footage.
- 17 square feet in a yard
- Approx. 3 yards in a hide
- Approx. 51 square feet in a hide
- Please use grade 3 pricing for COL
COM/COL Shipping Procedures
For seating COM/COL upholstery covers, please send upholstery
covers to:
Krug Inc.
111 Ahrens Street
Kitchener, Ontario
Canada N2H 4C2
Attention: RECEIVER
HEALTHCARE | CANADA | 9
KRUGEXPRESS PROGRAM
PROGRAM DETAILS
KrugExpress orders are ready to ship by the date acknowledged. Delivery and shipping schedules may result in actual shipping of orders at
a later date. Statutory holidays and scheduled factory vacations may add to acknowledged lead times of KrugExpress orders. Unless
otherwise specified on the order, the customer’s standard method of shipping Krug products will be utilized.
Available factory capacity for KrugExpress is filled by orders received on a ‘‘first come, first serve’’ basis. If the normal KrugExpress lead
time is not available for your order because available capacity has been filled, you will be immediately advised of the earliest available
ready-to-ship date. Please consult your Customer Service representative in advance if you wish to confirm the specific lead time availability
for a KrugExpress order.
Orders must be received by midnight of a given day for that day to be considered the official day the order is received. Order lead times are
acknowledged from the date the order is received, but not including the date the order is received.
KrugExpress orders must be ‘‘clean’’ when received in order to be considered officially received on a given day, and lead times will be
acknowledged from the date orders are determined to be ‘‘clean’’. Changes to KrugExpress orders are not allowed under any circumstances.
Orders for product on KrugExpress must clearly state: ‘‘KrugExpress’’.
COM and graded-in upholstery is available on Krug Express. Orders are scheduled on Krug Express, and given the best available date,
when the upholstery is received at Krug. Some conditions apply.
SEATING PROGRAM
Orders for seating products on the KrugExpress program may be subject to quantity maximums. Please contact Krug Customer
Service for more information.
Quantity maximums are dependent upon available capacity, in order to insure that we ship all orders on time.
Please note that the CAL 133 option is not available on KrugExpress.
10 | CANADA | HEALTHCARE
EASY ACCESS & STOOLS
101
102
103
104
105
105
106
107
108
KARMA
Karma LEED Credit Summary
Karma Easy Access
Karma Counter Stool
SOLIS
Solis LEED Credit Summary
Solis Dimensions & COM
Requirements | Easy Access Chair
Solis Easy Access Chair
JORDAN
Jordan LEED Credit Summary
Jordan Dimensions & COM
Requirements | Easy Access Chair
Jordan Easy Access Chair
100 | CANADA | HEALTHCARE
KARMA | LEED CI CREDIT SUMMARY
KARMA
MATERIAL CONTENT:
16% Plastic
16% Cardboard
4% Fabric
18% Plywood
4% Urethane Foam
41% Steel
PRE-CONSUMER
RECYCLED CONTENT = 5.51%
POST-CONSUMER
RECYCLED CONTENT = 24.98%
Up to 73.47% of this Karma product is
recyclable at the end of its useful life.
CONTRIBUTES TO
CREDIT
2.1 - 2.2
Construction Waste Management
1-2 point(s)
CREDIT
3.3
Resource Reuse
1 point
CREDIT
4.1
Recycled Content
1 point
CREDIT
4.2
Recycled Content
1 point
CREDIT
4.5
Low Emitting Materials,
Systems & Seating
1 point
CREDIT
5.1
Regional Materials*
1 point
CREDIT
7
Certified Wood
(MUST BE REQUESTED)
1 point(s)
*This credit is only applicable if in total 20% of the combined value of the procurement of construction materials and in the furniture are
manufactured within a radius of 500 miles. This credit will apply if the installation of the finished product occurs within 500 miles of Kitchener, Ontario.
®
®
level CERTIFICATION, AIR EMISSIONS AND FSC CERTIFICATION
level® CERTIFICATION
BIFMA’s e3 Furniture Sustainability Standard is a voluntary, multi-attribute standard that measures the degree
of sustainability of furniture. This standard evaluates product and company environmental attributes and
compliance systems in a wide range of elements which include Materials, Energy & Atmosphere, Human &
Ecosystem Health and Social Responsibility. Karma products have earned level®, BIFMA‘s sustainability
certification program for furniture, certification through third-party verification against the e3 standard.
AIR-EMISSIONS
All Karma products are supplied with air-emissions certified materials. Contact customer service for
information.
FSC®
In 2005, Krug received Forest Stewardship Council® (FSC®) Chain-of-Custody certification for our manufacturing
facilities. The FSC® Chain-of-Custody tracks certified wood from seedling to final sale. It signifies that the
growth, harvesting and production of goods are entirely achieved through responsible forestry, which guarantees
a healthy supply of forest resources for generations to come. Karma and other Krug products can be specified
with one of two types of FSC® Certification:
(a) FSC®-certified (which includes FSC®-certified lumber, veneer and substrate material)
(b) FSC®-mix certified (which includes substrate material only, and is a lower cost option certification)
Contact customer service for further information, pricing and leadtimes.
Architects, designers, and building professionals can specify FSC®-certified products in order to achieve a
point from the US. Green Building Council's Leadership in Energy and Environmental Design (LEED) Rating
System.
HEALTHCARE | CANADA | 101
KARMA | EASY ACCESS CHAIR & COUNTER STOOL
Description
Model
COM
1
Species
2
COL
3
FABRIC GRADES
4
5
6
7
LEATHER
8
9
18.5” Leg Frame, Matte Black or Silver Metallic - Fully Upholstered, with Arm and Standard Dust Cover
KAR218.5E
600
617
635
660
687
712
740
776
811
18.5” Leg Frame, Polished Chrome - Fully Upholstered, with Arm and Standard Dust Cover
KAR218.5EC
640
657
675
700
727
752
780
850
815
18.5” Leg Frame, Matte Black or Silver Metallic- Upholstered Seat & Wood back, with Arm and Standard Dust Cover
KAR218.5E
616
626
634
647
616
673
687
705
723
18.5” Leg Frame, Polished Chrome - Upholstered Seat & Wood back, with Arm and Standard Dust Cover
KAR218.5EC
656
666
674
686
701
713
727
745
763
ORDERING NOTES: When selecting Frame Color and Arm Style please see Product Code Key below.
Karma chairs all include the Standard Dust Cover (select “D” below), for optional Polymer Shroud change “D” to
“S” and add upcharge listed below. See page 15 for dimensions and COM requirements.
Karma Option Upcharges
$ List
CAL 133 & Moisture Barrier (per yard)
Removable Seat Covers
Removable Back Covers
Polymer Underseat Shroud 18.5”
Polymer Underseat Shroud 22”
Polymer Underseat Shroud 26”
Sled Base Matte Black or Silver Metallic
(Tamper Resistant Glides)
Sled Base Polished Chrome (Tamper Resistant Glides)
$ List
44
50
50
32
43
55
89
Tamper Resistant Hardware (no shroud, fully uph)
Tamper Resistant Hardware (with shroud, fully uph)
Tamper Resistant Hardware (no shroud, wood back)
Tamper Resistant Hardware (with shroud, wood back)
Tamper Resistant Arms (per chair)
Tamper Resistant Glides (4 legged chairs)
Non Accessible Staples
Added Weight (to 45lbs total chair weight)
25
60
60
110
25
25
60
350
151
PRODUCT CODE KEY
Line
Series
Frame Size
KAR
2
18.5L
B
U
AB
S
Karma
Stacking Chair
18.5”
22L
Matte Black
Fully Upholstered
Black
S
W
AG
Polymer Shroud
D
22”
Silver Metallic
Wood Back
Grey
26L
C
AT
26”
Polished Chrome
Taupe
Style
Arm Style
18.5S
NB
18.5” Sled Base
No Arm (Matte Black)
22S
NS
22” Sled Base
No Arm (Silver Metallic)
26S
NC
26” Sled Base
No Arm (Polished Chrome)
18.5E
18.5” Easy Access Chair
18.5C
18.5” Counter Height Stool
102 | CANADA | HEALTHCARE
Frame Color
Underseat Shroud
Standard
Dust Cover
KARMA | COUNTER STOOL
Description
Model
Species
COM
1
2
COL
3
FABRIC GRADES
4
5
6
7
LEATHER
8
9
18.5” Leg Frame, Matte Black or Silver Metallic - Fully Upholstered, No Arm, with Standard Dust Cover
KAR218.5C
447
465
482
506
535
559
587
622
657
18.5” Leg Frame, Polished Chrome - Fully Upholstered, No Arm, with Standard Dust Cover
KAR218.5CC
481
499
516
541
569
594
621
691
656
18.5” Leg Frame, Matte Black or Silver Metallic- Upholstered Seat & Wood back, No Arm, with Standard Dust
Cover
KAR218.5C
469
479
487
500
514
526
541
559
577
18.5” Leg Frame, Polished Chrome - Upholstered Seat & Wood back, No Arm, with Standard Dust Cover
KAR218.5CC
504
513
522
534
548
560
575
593
611
18.5” Leg Frame, Matte Black or Silver Metallic - Fully Upholstered, Taupe Arm, with Standard Dust Cover
KAR218.5C
472
486
507
532
559
584
613
648
683
18.5” Leg Frame, Polished Chrome - Fully Upholstered, Taupe Arm, with Standard Dust Cover
KAR218.5CC
506
523
541
566
594
618
647
682
717
18.5” Leg Frame, Matte Black or Silver Metallic- Upholstered Seat & Wood back, with Arm, with Standard Dust Cover
KAR218.5C
488
498
506
519
533
545
559
577
595
18.5” Leg Frame, Polished Chrome - Upholstered Seat & Wood back, with Arm, with Standard Dust Cover
KAR218.5CC
523
532
541
553
567
579
594
612
630
ORDERING NOTES: When selecting Frame Color and Arm Style please see Product Code Key below.
Karma chairs all include the Standard Dust Cover (select “D” below), for optional Polymer Shroud change “D” to
“S” and add upcharge listed below. See page 15 for dimensions and COM requirements.
PRODUCT CODE KEY
Line
Series
Frame Size
Frame Color
Style
Arm Style
KAR
2
18.5L
B
U
AB
S
Karma
Stacking Chair
18.5”
22L
Matte Black
Fully Upholstered
Black
S
W
AG
Polymer Shroud
D
22”
Silver Metallic
Wood Back
Grey
26L
C
AT
26”
Polished Chrome
Taupe
18.5S
NB
18.5” Sled Base
No Arm (Matte Black)
22S
NS
22” Sled Base
No Arm (Silver Metallic)
26S
NC
26” Sled Base
No Arm (Polished Chrome)
Underseat Shroud
Standard
Dust Cover
18.5E
18.5” Easy Access Chair
18.5C
18.5” Counter Height Stool
HEALTHCARE | CANADA | 103
SOLIS | LEED CI CREDIT SUMMARY
SOLIS
MATERIAL CONTENT:
MATERIAL
CONTENT:
PRE-CONSUMER
RECYCLED CONTENT = 15.28%
3% Fabric
3% Plywood
10% Cardboad
1% Rubber
1% Plastic
22% Urethane Foam
59% Steel
PRE-CONSUMER
POST-CONSUMER
RECYCLED CONTENT = 15.28%
RECYCLE CONTENT = 21.71%
POST-CONSUMER
RECYCLED
21.71%
Up
to 45.78CONTENT
% of Pan= Am
product is recyclable at
the
end
of
its
useful
life.
Up to 45.76% of this Solis product is
recyclable at the end of its useful life.
CONTRIBUTES TO
CREDIT
2.1 - 2.2
Construction Waste Management
CREDIT
3.3
ResourceCREDIT
Reuse 2.1
CREDIT
4.1
Recycled Content
3.3
4.1
RecycledCREDIT
Content
4.2
CREDIT
4.5
Low Emitting Materials,
CREDIT
CREDIT
CREDIT
4.2
CREDIT
4.5
Systems & Seating
CREDIT
CREDIT
- 2.2
5.1
RegionalCREDIT
Materials*
7
5.1
CONTRIBUTES TO
1 point
Construction Waste Management
1-2 point(s)
Resource Reuse
1 point
1 point
Recycled Content
1 point
1
point
Recycled Content
1 point
Low Emitting Materials, (MUST BE REQUESTED)
Systems Furniture & Seating
1 point
1 point
Regional Materials*
1 point
1
point
Certified Wood
1 point
(AVAILABLE ON SOME PRODUCTS - MUST BE REQUESTED
)
1 point(s)
Certified Wood
(MUST BE REQUESTED)
* This credit is only applicable if in total 20% of the combined value of the procurement of construction materials
*This credit is only applicable if in total 20% of the combined value of the procurement of construction materials and in the furniture are
and in the furniture are manufactured within a radius of 500 miles. This credit will apply if the installation of the
manufactured within a radius of 500 miles. This credit will apply if the installation of the finished product occurs within 500 miles of Kitchener, Ontario.
finished product occurs within 500 miles of Kitchener, Ontario.
CREDIT
7
1-2 point(s)
®
®
level CERTIFICATION, AIR EMISSIONS AND FSC CERTIFICATION
level® CERTIFICATION
BIFMA’s e3 Furniture Sustainability Standard is a voluntary, multi-attribute standard that measures the degree
[email protected]
| www.krug.ca
| 1.888.578.KRUG
of sustainability of furniture. This standard evaluates
product and
company environmental
attributes and
compliance systems in a wide range of elements which include Materials, Energy & Atmosphere, Human &
Ecosystem Health and Social Responsibility. Solis products have earned level®, BIFMA‘s sustainability
certification program for furniture, certification through third-party verification against the e3 standard.
AIR-EMISSIONS
All Solis products are supplied air-emissions certified. Contact customer service for information.
FSC®
In 2005, Krug received Forest Stewardship Council® (FSC®) Chain-of-Custody certification for our manufacturing
facilities. The FSC® Chain-of-Custody tracks certified wood from seedling to final sale. It signifies that the
growth, harvesting and production of goods are entirely achieved through responsible forestry, which guarantees
a healthy supply of forest resources for generations to come. Karma and other Krug products can be specified
with one of two types of FSC® Certification:
(a) FSC®-certified (which includes FSC®-certified lumber, veneer and substrate material)
(b) FSC®-mix certified (which includes substrate material only, and is a lower cost option certification)
Contact customer service for further information, pricing and leadtimes.
Architects, designers, and building professionals can specify FSC®-certified products in order to achieve a
point from the US. Green Building Council's Leadership in Energy and Environmental Design (LEED) Rating
System.
104 | CANADA | HEALTHCARE
SOLIS | EASY ACCESS CHAIR
DIMENSIONS & COM. REQUIREMENTS
Overall
Height
Seat
Height
Height of
Arms from
Floor
Width
Seat
Between Depth
Arms
Shipping Cube
Weight
COM
Yardage
Seat &
Back
COM
Yardage
Seat
COM
Yardage
Back
UPHOLSTERED GUEST BACK
25
30.75
21” Seat
24” Seat
28
30.75
40.5
40.5
24.5
24.5
32
32
20
23
20
20
51
55
16
18
1.6
1.6
0.9
0.9
1.6
1.6
MESH GUEST BACK
25
21” Seat
28
24” Seat
40.5
40.5
24.5
24.5
32
32
20
23
20
20
49
52
16
18
-
0.9
0.9
-
49.75
49.75
24.5
24.5
32
32
20
23
20
20
54
58
21
23
2.1
2.1
0.9
0.9
2.0
2.0
Overall
Width
Overall
Depth
30.75
30.75
UPHOLSTERED PATIENT BACK
21" Seat
25
30.75
28
30.75
24" Seat
MESH PATIENT BACK
25
30.75
49.75
24.5
32
20
20
50
21
0.9
21" Seat
24" Seat
28
30.75
49.75
24.5
32
23
20
53
23
0.9
Footrest height (All Models) 7.25”
When ordering more than one Easy Access chair, for yardage requirements please refer to page 28 for Guest backs and page 47 for Patient backs.
COM.
1
2
1018
1106
1041
1129
1064
1152
1110
1198
21” Guest, Open Arm, Upholstered Back
SOL2-HGU21OPU
Urethane
1072
Beech
1160
SOL2-HGU21OPW
1110
1198
1149
1237
24” Guest, Open Arm, Mesh Back
SOL2-HGM24OPU
Urethane
SOL2-HGM24OPW Beech
1039
1127
1062
1150
24” Guest, Open Arm, Upholstered Back
SOL2-HGU24OPU
Urethane
1094
SOL2-HGU24OPW
Beech
1182
21” Patient, Open Arm, Mesh Back
SOL2-HPM21OPU
Urethane
SOL2-HPM21OPW
Beech
DESCRIPTION/MODEL
Arm Type
COL
3
FABRIC GRADES
5
LEATHER
8
6
7
1157
1245
1203
1291
1249
1337
1295
1384
1367
1455
1226
1314
1302
1390
1379
1467
1456
1545
1532
1621
1687
1775
1085
1173
1131
1219
1177
1266
1224
1312
1270
1358
1316
1405
1388
1476
1133
1222
1172
1260
1250
1338
1330
1418
1408
1496
1485
1573
1563
1652
1721
1809
1095
1183
1118
1206
1141
1229
1187
1276
1234
1322
1280
1368
1326
1415
1373
1461
1444
1532
21” Patient, Open Arm, Upholstered Back
SOL2-HPU21OPU
Urethane
1152
SOL2-HPU21OPW
Beech
1240
1204
1292
1255
1343
1358
1446
1460
1548
1563
1652
1666
1754
1771
1859
1976
2064
24” Patient, Open Arm, Mesh Back
SOL2-HPM24OPU
Urethane
SOL2-HPM24OPW
Beech
1127
1215
1150
1238
1173
1261
1219
1308
1266
1354
1312
1400
1358
1446
1405
1493
1476
1564
24” Patient, Open Arm, Upholstered Back
SOL2-HPU24OPU
Urethane
1186
SOL2-HPU24OPW
Beech
1274
1239
1327
1292
1380
1398
1486
1504
1592
1610
1698
1715
1804
1822
1911
2034
2122
21” Guest, Open Arm, Mesh Back
SOL2-HGM21OPU
Urethane
SOL2-HGM21OPW Beech
4
9
ORDERING NOTES:
Combination upholstery (more than one upholstery cover within the same unit) is an option on all Solis upholstered products. When combination upholstery is
with upholstery of the same grade or COM, an upcharge for dual fabrics is $22 list per unit and $44 list per unit for three fabrics. When graded in combination
upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified and a description
of where each fabric is to be applied on the product in order to obtain a quote.
Solis Easy Access chairs are available with Removable Seat Covers for an upcharge of $61 list per chair. Solis Easy Access chairs are available with
Removable Back Covers (upholstered backs only) for an upcharge of $39 list per chair. Complete mesh backs (21”& 24”) can be ordered and field replaced.
21” & 24” Easy Access Chairs are available with a Cleanable Under-Seat Splashguard for an upcharge of $28 list per chair.
CAL 133 and Moisture Barriers are available for an upcharge of $44 list per yard.
Maple Arms are available for an upcharge on beech pricing of $55 list per arm.
Wood Side Rails are available for an upcharge of $88 list per chair in Beech or $110 list in Maple.
The standard Solis Frame Color is Silver Metallic. Silver metallic frames are available with an anti-microbial finish for an upcharge of $44 list per chair or table.
Additional frame colors are available for an upcharge of $44 list per seat, please see page 4 for color selection and ordering quantities.
PRODUCT CODE KEY
Line
Series
Chair Type
SOL
2
H
Solis
Chair
Easy Access
Style
G
Guest
P
Patient
Back Type
U
Size
21
Upholstered Back
M
Mesh
Arm Type
OPW
Open Arm - Wood Cap
24
OPU
Open Arm
Urethane Arm Cap
HEALTHCARE | CANADA | 105
JORDAN | LEED CI CREDIT SUMMARY
JORDAN
MATERIAL CONTENT:
MATERIAL
CONTENT:
PRE-CONSUMER
RECYCLED CONTENT = 6%
2% Steel Seat Springs
6% Fabric
9% Cardboard
PRE-CONSUMER
POST-CONSUMER
RECYCLED CONTENT = 6%
RECYCLE CONTENT = 13%
19% Steel
29% Hardwood
1% Aluminum
17% Plywood
18% Purethane Foam
POST-CONSUMER
RECYCLED
CONTENT
= 13%
Up to 28.7%
of Jordan
Easy Access product is
recyclable at the end of its useful life.
Up to 28.7% of this Jordan product is
recyclable at the end of its useful life.
CONTRIBUTES TO
CREDIT
2.1 - 2.2
2.1 - 2.2
Resource Reuse
CREDIT 3.3
4.1
RecycledCREDIT
Content
CREDIT 4.5
CREDIT
CREDIT
3.3
CREDIT
4.1
CREDIT
4.2
CREDIT
CREDIT
CREDIT
CONTRIBUTES TO
1-2 point(s)
Construction Waste Management
Recycled Content
CREDIT
5.1
Low Emitting
Materials,
CREDIT 7
4.5
Construction Waste Management
Resource Reuse
Recycled Content
Low Emitting Materials,
Systems & Seating
Regional Materials*
Certified Wood (MUST BE REQUESTED)
1-2 point(s)
1 point
1 point
1 point
1 point
1 point
1 point
1 point
1 point
Systems & Seating
1 point
5.1
Regional Materials*
1 point
7
* This credit is only applicable if in total 20% of the combined value of the procurement of construction materials
Certified and
Wood
in the furniture are manufactured within a radius of 500 miles. This credit will apply1ifpoint(s)
the installation of the
(MUST BE REQUESTED
)
finished product
occurs within 500 miles of Kitchener, Ontario.
*This credit is only applicable if in total 20% of the combined value of the procurement of construction materials and in the furniture are
manufactured within a radius of 500 miles. This credit will apply if the installation of the finished product occurs within 500 miles of Kitchener, Ontario.
®
®
level CERTIFICATION, AIR EMISSIONS AND FSC CERTIFICATION
[email protected] | www.krug.ca | 1.888.578.KRUG
level® CERTIFICATION
BIFMA’s e3 Furniture Sustainability Standard is a voluntary, multi-attribute standard that measures the degree
of sustainability of furniture. This standard evaluates product and company environmental attributes and
compliance systems in a wide range of elements which include Materials, Energy & Atmosphere, Human &
Ecosystem Health and Social Responsibility. Jordan products have earned level®, BIFMA‘s sustainability
certification program for furniture, certification through third-party verification against the e3 standard.
AIR-EMISSIONS
All Jordan products are supplied with air-emissions certified materials. Contact customer service for
information.
FSC®
In 2005, Krug received Forest Stewardship Council® (FSC®) Chain-of-Custody certification for our manufacturing
facilities. The FSC® Chain-of-Custody tracks certified wood from seedling to final sale. It signifies that the
growth, harvesting and production of goods are entirely achieved through responsible forestry, which guarantees
a healthy supply of forest resources for generations to come.
Architects, designers, and building professionals can specify FSC®-certified products in order to achieve a
point from the US. Green Building Council's Leadership in Energy and Environmental Design (LEED) Rating
System.
106 | CANADA | HEALTHCARE
JORDAN | EASY ACCESS CHAIR
DIMENSIONS
Overall
Width
Overall
Depth
Overall
Height
Seat
Height
Height of
Arms from
Floor
Footrest
Height
Width
Between
Arms
Seat
Depth
Shipping
Weight
Cubes
25
28
28.25
28.25
40
40
24
24
32
32
6.75
6.75
20.5
23.5
19
19
49
53
21
21
21” Patient 25
24” Patient 28
28.25
28.25
49.25
49.25
24
24
32
32
6.75
6.75
20.5
23.5
19
19
54
58
26
26
21” Guest
24” Guest
COM YARDAGES - Guest Easy Access Chair
COM Yardage
Seat Only
COM Yardage
Back Only
COM Yardage
Seat & Back
21” & 24” Guest - One Chair
0.9
1.4
1.6
21” & 24” Guest - Two Chairs
1.3
2.8
3.2
21” & 24” Guest - Three Chairs
2.2
4.2
4.8
21” & 24” Guest - Four Chairs
2.6
5.6
6.4
COM YARDAGES - Patient Guest Easy Access Chair
COM Yardage
Seat Only
COM Yardage
Back Only
COM Yardage
Seat & Back
21” & 24” Patient - One Chair
0.9
1.9
2.2
21” & 24” Patient - Two Chairs
1.3
3.8
4.2
21” & 24” Patient - Three Chairs
2.2
5.7
6.3
21” & 24” Patient - Four Chairs
2.6
7.6
8.4
JORDAN | EASY ACCESS CHAIR
21” Guest
21” Patient
ORDERING NOTES:
Combination upholstery (more than one upholstery cover within the same unit) is an option on all Jordan upholstered products. When combination upholstery
is with upholstery of the same grade or COM, an upcharge for dual fabrics is $22 list per unit and $44 list per unit for three fabrics. When graded in
combination upholstery is selected, use the highest grade upholstery selected or contact Customer Service for a quote -please provide the fabrics specified
and a description of where each fabric is to be applied on the product in order to obtain a quote.
Jordan Patient Option Upcharges
CAL 133 & Moisture Barrier (per yard)
Patient chair - Removable Seat Covers
21” & 24” - Removeable Back Covers
30” - Removable Back Covers
Kinetic Back option
$ List
44
61
61
99
83
$ List
21” & 24” Cleanable Under-seat Splashguard
30” Cleanable Under-seat Splashguard
Designer White -D354SL Solid Surface Arm Cap
28
33
165
WEIGHT CAPACITIES
Jordan weight capacities are as follows:
Easy Access Chairs (21” & 24”) - 350 lbs
Jordan replacement parts can be viewed on-line at www.krug.ca
FEATURES:
For a complete list of features see page 31.
HEALTHCARE | CANADA | 107
JORDAN | EASY ACCESS CHAIR
COM
1
2
COL
3
4
21” Guest, Open Arm
JOR2-HG21OPS Beech
JOR2-HG21OPS Maple
1169
1246
1202
1279
1235
1312
1306
1384
24” Guest, Open Arm
JOR2-HG24OPS Beech
JOR2-HG24OPS Maple
1207
1279
1240
1312
1273
1345
21” Patient, Open Arm
JOR2-HP21OPS Beech
1257
1317
Maple
1317
1378
24” Patient, Open Arm
JOR2-HP24OPS Beech
JOR2-HP24OPS Maple
1290
1345
1351
1406
DESCRIPTION/MODEL
Species
JOR2-HP21OPS
DESCRIPTION/MODEL
Metal Footrest Cap
JOR2-RHFRC
FABRIC GRADES
5
6
7
LEATHER
8
9
1378
1455
1450
1527
1521
1599
1593
1670
1692
1770
1345
1417
1417
1488
1488
1560
1560
1632
1632
1703
1731
1803
1378
1499
1621
1742
1863
1985
2161
1439
1560
1681
1803
1924
2045
2222
1411
1466
1532
1588
1654
1709
1775
1830
1896
1951
2018
2073
2194
2249
Price
55
ORDERING NOTES:
For Urethane Arm Caps, Please change the “S” in the model number to a “U” an add an upcharge of $94 list per chair.
Please see page 107 for Ordering Notes and Yardage requirements.
PRODUCT CODE KEY
Line
Series
JOR
Jordan
Chair Type
Size
2
HG
21
Chair
Easy Access Guest Chair
HP
Easy Access Patient Chair
108 | CANADA | HEALTHCARE
Arm Type
OPS
Open Arm
24
OPU
Open Arm Urethane
Arm Cap
Ver. 1
2015
PCHEALTHCDN2015
Printed in Canada
All products are air emissions certified and are available as FSC® certified
[email protected] | www.krug.ca | 1.888.578.KRUG
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement