Samsung | DSB-4700F | 4. Software Upgrade and Installation

4. Software Upgrade and Installation
4. Software Upgrade and Installation
4-1 Main software install process
COM
PC
110V AC
DSB-4700F
Fig. 4-1
1) Prepare PC and DSB-4700F as above Fig. 4-1
2) Open STB, TRM file while executing hyper terminal of PC
PORT
: Select to COM1 port currently used.
Baudrate : 115200
3) Run hyperterminal and turn (power) on DSB-4700F
After hyperterminal monitor display some message, press ‘d’ key
-DSB-4700F : Samsung brand FTA model loader version x . x
4) Send a file at downlode ROM image. (protocor : 1K xmodem)
5) Select main program (C : main DSB-4700F_final.bin) by each kinds as selecting the file send of transfer or
hypertermianl.
6) Check if the normal message appears.
Samsung Electronics
4-1
Software Upgrade and Installation
MEMO
4-2
Samsung Electronics
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising