Canon RE350 Document Camera Quick Reference Guide

Canon RE350 Document Camera
Quick Reference Guide
1.
Not applicable to the Videolinq Network
2.
Press to switch between Document Camera and Scan Converter (if scan
converter is connected)
3.
Press to provide a view of the document – object - image you are showing as
a negative image (similar to a photo negative)
4.
Press to over-ride any manual white balance setting (do this with no
document - object – image on the document camera)
5.
Turn this dial to ‘soften’ a white object or white piece of paper
6.
Press to provide an image with the colour removed
7.
Turn this dial to sharpen the focus on lower of upper parts of a 3D object
8.
Turn this dial to brighten a dull document – object - image or darken a bright
document – object - image
9.
Press to auto focus on a document – object – image if required
10. Press to manually focus on a close up of a document – object – image if
required
11. Press to manually focus on a wide view of a document – object – image if
required
12. Press to zoom out
13. Press to zoom in
14. Press to switch the overhead lights on or off
15. Press to switch the backlight on or off (the overhead lights will be switched off
when you activate the backlight)

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project