2 03-15
02 03-15
1
02 03-15
SUBJECT
DATE
Oil Filter Stand Pipe
February 2015
Additions, Revisions, or Updates
Publication Number / Title
Platform
DDC-SVC-MAN-0081
DD Platform
DDC-SVC-MAN-0181
EuroIV DD
Platform
Section Title
Change
Oil Filter Stand Pipe
This is a new section.
All information subject to change without notice.
02 03-15 Copyright © 2015 DETROIT DIESEL CORPORATION
3
2 Oil Filter Stand Pipe Inspection
2
Oil Filter Stand Pipe Inspection
Inspect as follows:
1. Inspect the oil filter stand pipe for cracks or damage.
2. Ensure the oil bypass valve (1) is not broken or missing.
NOTE: If the stand pipe or bypass valve are broken, all parts must be recovered. If they are not found with the
filter removed, follow the instructions below.
3.
4.
5.
6.
7.
8.
9.
4
Remove the oil pan drain plug and drain the engine oil. Discard oil drain plug O-ring.
Remove the oil filter stand pipe. Refer to section "Removal of the Oil Filter Stand Pipe".
Remove the oil coolant module. Refer to section "Removal of the Oil Coolant Module".
Thoroughly flush the oil coolant module to ensure no plastic debris is present.
Reinstall the oil coolant module. Refer to section "Installation of the Oil Coolant Module".
Install the new oil filter stand pipe. Refer to section "Installation of the Oil Filter Stand Pipe".
Refill the engine with new oil. Refer to section "How to Replace the Lubricating Oil and Oil Filter".
All information subject to change without notice.
Copyright © 2015 DETROIT DIESEL CORPORATION 02 03-15
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement