MAN0447-01
GMR 16-Point
H Base
Product Specifications
And Installation Data
1
INTRODUCTION
The GMR 16-Point H Base (IC660RGS164) is provided for use with IC660EBD020/21 modules.
Note: Modules are purchased separately.
004RGS001-R0
Figure 1 – RGS164 Base (Shown with 4 Modules Plugged In)
2
SPECIFICATIONS
Table 2 – RGS164 Specifications
DC in l = 24V±10%
DC in 2 = 24V±10%
Input
Outputs (Fused)
24Volt GMR-H
Output Current
(Maximum)
2A each point. Limited to 15A Total Base
Dimensions
Protection
14 March 2001
W
X L 18.31” ( 465mm) X H 1.06” (26.92mm)
12.88” ( 327.0mm)
Note: With Modules inserted: H 4.2” (106.68mm)
Self-indicating (Bussman GMT-2A)
MAN0447-01
3
INSTALLATION
Mounting holes are drilled for M6 or 1/4" hardware.
Modules are plugged into the RGS164.
(Modules are not supplied with the base (RGS164).
MONITOR
4X
12.88
[327.0]
COM.
LAN
PWR
CONN.
2A FUSES
16 POINT I/0
18.31 [465.0]
004RGS002-R0
Figure 2 – Mounting Dimensions
4
TECHNICAL SUPPORT
For assistance, contact Technical Support at the following locations:
North America:
(317) 916-4274 or visit our website at www.heapg.com.
Europe:
(+) 353-21-4321-266
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement