Digitizers PCI/PXI-9820 2-CH 14-Bit 65 MS/s PCI/PXI Digitizers with SDRAM Introduction ADLINK’s PCI/PXI-9820 is a 65 MS/s, high-resolution PXI digitizer with deep SODIMM SDRAM memory. The device features flexible input configurations, including programmable input ranges and user-configurable input impedance. With the deep onboard acquisition memory, the PCI-9820/PXI-9820 is not limited by the 132 MB/s bandwidth of PCI bus and can record the waveform for a long period of time. The PCI-9820/PXI-9820 is ideal for high-speed waveform capturing, such as radar and ultrasound applications, as well as software radio applications, or those signal digitizing applications which need deep memory for data storage. PCI-9820 Specifications Analog Input Number of channels: 2 simultaneous-sampled single-ended Resolution: 14 bits Maximum sampling rate · 65 MS/s for 2 inputs · 130 MS/s for Ping-Pong mode using external timebase Onboard sample memory · 512 MB Bandwidth (-3 dB): 30 MHz minimum Input signal ranges: (software programmable) ±5 V, ±1 V Input Coupling: DC Overvoltage protection PXI-9820 Features Supports a 32-bit 3.3 V or 5 V PCI bus PXI specifications Rev.2.2 compliant (PXI-9820) 14-bit A/D resolution Up to 60 MS/s (with internal timebase) & 65 MS/s (with external timebase) sampling rate per channel Up to 130 MS/s sampling rate in "ping pong" mode 2-CH single-ended bipolar inputs >30 MHz -3 dB bandwidth Up to 512 MB onboard SODIMM SDRAM Programmable ranges of ±1 V and ±5 V User-configurableinputimpedanceof50Ωor high input impedance Scatter-gather DMA Analog and digital triggering 2-CH synchronous digital inputs (PXI-9820) Fully auto calibration Multiple modules synchronization capability •Windows XP/7/8, x64/x86 •LabVIEW, MATLAB, Visual Studio, Visual Studio.NET •AD-Logger, DAQBench CLK IN CLK IN TRG IO SDI0 CH0 TRG IO SDI1 CH0 Range SNR ±5V 66 dB 62 dB ±1V Software Recommendations ± 14 V ±5V Input Impedance (soldering selectable): 50 Ω, 1.5 MΩ Crosstalk: < -80 dB, DC to 1 MHz Total harmonic distortion (THD): -75 dB Signal-to-Noise ratio (SNR) Software Compatibility Overvoltage Protection ±1V OS Information Range ±5V Spurious-free dynamic range (SFDR): 75 dB Data transfer: bus-mastering DMA with scatter-gather Auto Calibration Onboard reference: +5 V Onboard reference temperature drift: 2 ppm/˚C Stability: 6 ppm/1000 Hrs External Timebase Input PCI-9820: direct external timebase input PXI-9820: 10 MHz input for PLL or direct external timebase input Connector: SMB Impedance: 50 Ω Coupling: AC Input amplitude: 1 Vpp to 2 Vpp Overvoltage protection: 2.5 Vpp Frequency range: 500 kHz - 65 MHz Triggering CH1 CH1 Analog Triggering Modes: pre-trigger, post-trigger, middle-trigger, delay-trigger Sources: CH0 and CH1 Coupling: DC Synchronous Digital Input (For PXI-9820 Only) Number of channels: 2 Compatibility: 5 V/TTL Data transer: bus-mastering DMA with scatter/gather General Specifications I/O connector · BNC x 2 for analog inputs · SMB x 4 for external digital trigger, external time base, and synchronous digital inputs Operating temperature: 0˚C to 50˚C (32˚F to 122˚F) Storage temperature: -20˚C to 80˚C (-4˚F to 176˚F) Relative humidity: 10% to 90%, non-condensing Power requirements Power Rail Current PXI-9820 5V 3.3 V PCI-9820 900 mA typical 895 mA 305 mA typical 295 mA 360 mA typical (with 128 MB SDRAM) 310 mA (with 128 MB SDRAM) 500 mA typical (with 512 MB SDRAM) 430 mA (with 512 MB SDRAM) 12 V Dimensions (not including connectors) PCI-9820: 175 mm x 107 mm (6.82” x 4.17”) PXI-9820: 160 mm x 100 mm (6.24” x 3.9”) Certifications EMC/EMI: CE, FCC Class A Cable Accessories Cable Description PXI-9820 PCI-9820 SMB-SMB-1M SMB-BNC-1M ACL-SSI-2 ACL-SSI-3 ACL-SSI-4 1-meter SMB to SMB cable 1-meter SMB to BNC cable SSI Bus cable for 2 devices SSI Bus cable for 3 devices SSI Bus cable for 4 devices √ √ √ √ - √ - √ - √ Ordering Information PCI-9820D/128-0 2-CH 14-Bit 65 MS/s Digitizer with 128 MB Memory PCI-9820D/512-0 2-CH 14-Bit 65 MS/s Digitizer with 512 MB Memory PXI-9820D/128 2-CH 14-Bit 65 MS/s Digitizer with 128 MB Memory PXI-9820D/512 2-CH 14-Bit 65 MS/s Digitizer with 512 MB Memory Digital triggering Modes: pre-trigger, post-trigger, middle-trigger, delay-trigger Source: external digital trigger from SMB Compatibility: 5 V/TTL Updated January 29, 2013. ©2013 ADLINK Technology, Inc. All Rights Reserved. All speciications are subject to change without further notice.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project