Swegon KSTb Installation Instructions

Below you will find brief information for KST KST 0, KST KST 1, KST KST 2, KST KST 4. The KST series are designed to control and monitor the air flow in a variety of building systems. They can be used to control the flow of air in a room, zone, or building. The KST series can be integrated into a LonWorks network for remote control and monitoring.

PDF Download
Document
KST KST 0, KST KST 1, KST KST 2, KST KST 4 Installation - Wiring | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Control and monitor air flow
  • Control of air flow in room, zone, or building
  • Integration into a LonWorks network
  • Remote control and monitoring
  • Easy to install and configure

Frequently asked questions

Use Belden cable type 8471 for 21 and 22 connection. See wiring graphs.

The maximum operating temperature is 50°C.

For connections up to 10 meters use single wire with a diameter of 0.5 mm. For connections between 10 and 30 meters use a wire with a diameter of 1.0 mm (0.75 mm2).
Preparing document for printing…
0%