View detail for How to Pick the Best 8- or 32

View detail for How to Pick the Best 8- or 32
How to Pick the Best 8- or 32-Bit Microcontroller
for Your Next Design
Oyvind Strom, Sr. Director of Product Marketing, Atmel
Andreas Eieland, Director of Product Marketing, Atmel
Henrik Flodell, Sr. Product Marketing Manager, Atmel
Not so long ago, embedded systems were expensive and complex, limiting their use to such highly
sophisticated applications as rocket control systems. Now it seems low-cost embedded microcontrollers
(MCUs) are everywhere—from health monitors you wear on your wrist to drones you control with your
smartphone. In addition to rapidly increasing number of consumer electronics products, industrial
applications such as vehicle control systems and new smart connected devices like smart electricity
meters depend on embedded software and MCUs.
In fact, although over 6 billion new microprocessors are used each year, only about 100 million devices
(less than 2 percent) of that total are used in general-purpose computers. The rest show up in our kitchens
(bread machines, food processors, and microwave ovens), living rooms (televisions, stereos, and remote
controls), and workplaces (fax machines, pagers, laser printers, cash registers, and credit card readers).
At least one study suggests this huge and growing embedded systems market will reach USD 194.27
billion by 2018.
In addition to low cost, the low power consumption and higher efficiency of today’s MCUs also contribute to
growth in the embedded system market. These capabilities not only enable application engineers to create
new types of battery-powered applications but also make it possible to add new functionality—such as
capacitive touch interfaces or wireless connectivity—to their products.
Early in the evolution of the embedded systems industry, Atmel recognized that MCUs would become
ubiquitous. As a result the company devoted extensive R&D to improving its embedded processing
technologies. This head start helped to make Atmel one of the leading microcontroller makers in the world.
Atmel has made a strong commitment to furthering the expansion and adoption of new Internet of Things
devices, and has jumped to an early leadership position in the IoT market. This focus led to a number of
enhancements to both the Atmel AVR and Atmel ǀ SMART ARM -based MCU architectures.
From the simplest application like a garage door control to a robust and secure onboard automotive
system, the broad Atmel portfolio of MCUs provides numerous options for any application, whether it’s 8or 32-bit. These MCUs deliver industry-leading performance and power efficiency.
The devices are not only engineered to work together but are also seamlessly connected through an
ecosystem of Atmel and third-party technologies. Atmel Studio, a free integrated development
environment (IDE) that works seamlessly across all Atmel 8- and 32-bit architectures, rounds out this
portfolio. For example, designers can easily add wireless connectivity to current designs or plan for it in
future iterations of their designs. Or, they can leverage built-in or external CryptoAuthentication™
technologies to ensure designs will meet the increasing needs for security.
In addition to free tools like Atmel Studio, Atmel has a broad ecosystem of commercial partners offering
professionally supported development and debug tools, RTOS and middleware solutions, and design
services. Access to this wide range of commercial development tools, with their dedicated support
channels and guaranteed response times, can significantly reduce time-to-market.
8-bit Innovation
Where applications are not compute intensive, 8-bit MCUs deliver high-performance and power-efficient
processing, which explains why they continue to enjoy widespread design wins in virtually all market
sectors. According to IC Insights, 8-bit MCUs will account for a 28% share of units shipped by 2017.
Atmel AVR technology is one of the leading 8-bit architectures in the industry. Optimized to reduce
time-to-market, it is based on the industry's most code-efficient architecture for C and assembly
programming. No other 8-bit MCU delivers more computing performance with better power efficiency. In
fact, AVR devices perform close to 1 MIPS per MHz.
The AVR architecture has also become synonymous with ease-of-use, making AVR devices the most
attractive choice for students and enthusiasts to learn about computer architectures and embedded
programming. The AVR processor core was one of the first MCUs to use on-chip Flash for program
memory storage. Plus, the AVR architecture allows in-system reprogramming. Since the introduction of the
AVR core in 1997, its ease-of-use has made it the preferred processing engine in a wide variety of
applications. It is also used in myriad embedded projects at universities and Maker projects around the
world. The choice of using AVR in the well-known Arduino open-source development platform further
testifies to the success and ease-of-use of this architecture. And the number of successful crowd-funded
projects that were initiated from an Atmel AVR device are growing daily.
In addition to the general-purpose MCUs, Atmel offers a wide range of application-specific AVR-based
devices suitable for lighting, smart battery, industrial and automotive applications. A huge and fast-growing
application area is wireless. In fact, RF is rapidly becoming a standard peripheral in Atmel MCUs of all
sizes and bandwidths.
Among the many reasons to choose Atmel AVR devices is that they are not only the easiest to use but
also the lowest-power MCUs. With their code-efficient design and single-cycle execution, they also provide
better processing than comparable 8-bit products. It is important to note that the code set in the AVR
architecture was optimized for C-code vs. assembly language from the beginning. This is partly because
the AVR design was invented after the advent of C as the de facto standard language for embedded
development. In fact, the original AVR creators worked closely with compiler writers at IAR Systems—the
industry-leading Swedish maker of C and C++ compilers, debuggers—to ensure that the instruction set
provided for more efficient compilation of high-level languages. This collaboration was instrumental in the
optimization of the instructions for C, and gives users the ability to write the instructions in two locations,
which enables single-cycle execution of fetch (both the exe and the data, execute and write back).
Atmel continues to improve the AVR portfolio with ongoing innovation and refinements. For example, the
industry-leading low power of AVR devices stems not just from the efficient architecture design but also
from features such as the unique Atmel event system, which allows peripherals to communicate directly
with each other without involving the CPU or bus resources.
Industry Ecosystem Fosters Best-of-Breed 32-bit MCUs
As consumer products and industrial applications become increasingly complex and incorporate more
advanced features like touch interfaces and wireless connectivity, needs for performance and scalability
are growing. In a simple application like a water-level sensor, for instance, an 8-bit MCU might offer the
ideal mix of cost-effectiveness and performance. However, when you move to many water-level sensors
linked via a cloud-based application, the design’s needs would become more complex. Connecting to the
Internet would require enough horsepower to run a TCIP stack. TCIP is a complicated protocol and
requires RAM buffering, which suggests the need for larger Flash memory and RAM as well as security to
encrypt the data traffic to and from the network. Or, for example, many designs are calling for capacitive
touch interfaces, which require more processing power.
Situations like this warrant a move to a 32-bit processor architecture like the ARM Cortex processor
family. Sometimes designers want to move to 32-bit early, before running out of power in an 8-bit
architecture, simply to future-proof their product because with some manufacturers the 8-bit code cannot
be reused when the design moves to 32 bits.
Combining industry-leading performance and power efficiency, Atmel | SMART ARM-based MCUs build
on decades of innovation and industry firsts—including the first on-chip Flash memory. They offer 8-bit
ease of use in a 32-bit MCU, and range from entry-level devices to highly integrated Flash-based products
with extensive connectivity, enhanced interfaces, and ironclad security. These advanced Atmel
ARM-based MCUs are designed to optimize system control and user interface management.
Where designs call for higher processing power, these chips deliver more than 10x the performance of
8-bit MCUs. And yet these 32-bit chips offer remarkable low power operation. In fact, the ultra-low-power
Atmel | SMART SAM L21 is the lowest power consuming 32-bit ARM-based MCU in the world.
What does this low power mean in today’s applications? In a wearable with basic touch or for sensors in
the Internet of Things, for example, devices can run more than a decade on a single battery. The SAM L21
uses less than a third of the power consumption of competitive solutions and can run in active mode down
to 35uA/MHz and retain 32kB of Flash while running a real-time clock at 940nA. It uniquely achieves this
ultra-low power consumption in active mode without having to limit Flash or SRAM size, making it ideal for
IoT, fitness bands, smart metering, human interface devices, and other battery-powered applications
where large embedded memories are needed. To offload the CPU computation intensive tasks like
capacitive touch sensing have also been distributed to smarter standalone peripherals. To further simplify
program flow and reduce power consumption, these peripherals are interconnected with event and
sleepwalking systems to enable operation without CPU intervention.
Like the Atmel AVR architecture, the ARM architecture is based on a reduced instruction set computing
(RISC) architecture that requires significantly fewer transistors than legacy architectures such as MIPS. It
offers a number of advantages such as smaller program size and faster software development time.
Additionally, Atmel has enhanced its ARM-based products with a number of unique innovations such as a
SERCOM module that lets designers basically mix and match up to five USARTs. This feature not only
reduces BOM costs but also offers more layout flexibility.
Atmel ǀ SMART ARM-based MCUs are scalable, compatible, energy efficient, and easy to use. For Atmel
customers, another key advantage is better software reusability, which not only makes it easy to move up
and down the Atmel | SMART families but dramatically eases the migration from 8-bit Atmel AVR MCUs to
32-bit devices in the Atmel | SMART family like the SAM D21 Cortex-M0+- based microcontroller.
The dynamic technology environment surrounding ARM cores offers another major advantage. The use of
ARM architecture processors in smartphones and tablet computers such as the iPad, Android, and
Windows RT translates to competition that drives rapid innovation, as well as a very robust set of user
groups and world-class technology partners supporting these systems.
Atmel | SMART MCUs are also supported by a world-class ecosystem with an extensive list of partners
and comprehensive tools and software, including the free Atmel Studio. This means designers don’t have
to rely on one third-party provider.
The portfolio offers different models based on customer needs—from entry-level devices (like the SAM
D10) to more full-featured MCUs (like the SAM D21). Plus, these devices all use the same tool-chain,
architecture and code, making it easy to move up or down the family chain and reuse code.
Finally, these devices come in multiple package options, including the world’s smallest wafer level chip
scale package (WLCSP). Also, a .454 mm ball pitch offers significant height advantage for mobile devices
and wearables. In addition, a unique cap-less package design maximizes the number of I/O pins because
the IDO regulator and reset pins can be reset to function as I/O pins.
Atmel offers a complete portfolio of MCUs that combine ease-of-use, low power, and a high level of
integration. These 8- and 32-bit devices deliver a rich blend of proven technology and groundbreaking
innovation, making them ideal for a new generation of smart and secure connected products. The wide
range of MCUs available in this portfolio is also one of many reasons that more than 300,000 designers
worldwide use Atmel devices for their designs. They can find just the right mix of power, efficiency and
cost. Meanwhile, the large, code-compatible Atmel families allow designers to easily and cost-effectively
reuse knowledge when improving products, extending product lines, or expanding into new markets. And
with a free IDE that works with both 8- or 32-bit devices—not to mention low-cost debuggers and
kits—they set a new benchmark for ease of use and reduce time-to-market.
Atmel Corporation
1600 Technology Drive, San Jose, CA 95110 USA
T: (+1)(408) 441.0311
F: (+1)(408) 436.4200
© 2015 Atmel Corporation. / Rev.: Atmel-45136A-Pick-Best-Microcontroller-Strom-Eiland-Flodell_Article_US_032015
Atmel, Atmel logo and combinations thereof, Enabling Unlimited Possibilities, and others are registered trademarks or trademarks of Atmel Corporation or its
subsidiaries. ARM, ARM Connected logo and others are the registered trademarks or trademarks of ARM Ltd. Other terms and product names may be the
trademarks of others.
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by
this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL
Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and
products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not
suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF