Pos FL telco en
Poseidon family
Poseidon SNMP thermometer
Measurement of temperature, humidity and other
sensors via Ethernet network.
The Poseidon family devices monitor temperature, humidity, air-flow, door
contacts and other values using up to 42 sensors, which can be up to 1000 meters from the Poseidon
unit. The measured values can be accessed over WWW for a supervisor or over M2M protocols
(SNMP, XML, Modbus/TCP etc.) for monitoring software.
Poseidon will increase protection of your devices and information by monitoring the environment
where your technology is placed. You can measure for
example:
•
•
•
•
•
•
Inner and outer temperature of the device
Room or rack humidity
Flooding or water presence
Ventilation and air-flow
Power supply failures
Door opening, movement etc.
Applications
•
IT – monitoring of server rooms, 19“ Racks, UPS.
•
Monitoring of air-condition devices, especially of condensed water.
•
Environment monitoring in backup power source rooms and power packages.
•
Monitoring of environment in intelligent buildings.
•
Monitoring of storage premises.
•
Information booths, terminals, transmitters - standalone units in the outside environment.
Working with the measured values
Alarm notifications are sent via email or as a SNMP
trap. You can also send the alarm via SMS using
complementary software.
The measured values are transferred to the NMS
(Network Management Systems) over the Ethernet
network using the following protocols:
•
XML (ideal for pocket PC or PDA )
•
SNMP (telecommunications supervision)
•
Modbus/TCP (industrial systems)
User or administrator can monitor the state of the
device via a WWW interface.
www.HW-group.com
Poseidon family
Technical parameters
•
Sensors
Temperature - (up to 42 sensors, measured temperature from -55 °C to +640 °C, up to
1.000 meters distance)
Humidity (up to 25 sensors, up to 1.000 meters distance)
Air-flow (sensor for detecting ventilation failures)
Digital input / contact (sensors of smoke, fire, movement, flooding, tilt, door contacts,
flooding etc...)
General input (0..10V, 4..20mA – using external RS-485 converters)
•
Communication protocols: TCP/IP, UDP, SMNP, SNMP Trap, Modbus/TCP, XML, HTML
Poseidon can be mainly used for supervising remote objects where you need to watch physical
parameters of the environment and react to every state change. You can use the Poseidon with
many sensors and peripherals because of wide support of different protocols.
The WWW interface lowers your expenses for monitoring and SNMP support will inform you in case
of any state change.
For a quick start of working with the Poseidon unit we recommend one of the starting sets which
contain one Poseidon unit (different models) and door contacts or temperature and humidity sensors.
Try the Poseidon via internet as an online demo – you can find detailed information on our website:
www.HW-group.com
www.HW-group.com
Poseidon family
Sensors overview
You can connect a wide variety of supplied temperature and humidity sensors to the Poseidon unit.
You can also use professional sensors with analog outputs and connect them using supplied
converters for analog interfaces 0..10V or 4..20mA.
Variable
Accuracy
Distance
No. of
sensors
Interface
Designed for
600 005
Temp-1-Wire
1x temp
± 0,5 °C
max 25 m
up to 10
1-Wire
Measuring in-room temperatures
600 051
Temp-232
1x temp
± 0,5 °C
max 20 m
1
RS-232
600 105
Temp-485
1x temp
± 0,75 °C
max 1000 m
up to 31
RS-485
600 106
HTemp-485
1x temp
1x humidity
± 0,75 °C
± 2% RH
max 1000 m
up to 25
RS-485
Measuring in-room temperatures
Measuring in-room temperatures, wall
mounting
Measuring in-room temperatures and
humidity, wall mounting
600 113
Temp-485-Pt100 Box
1x temp
± 0,15 °C
max 1000 m
up to 31
RS-485
600 114
Temp-485-Pt100 Cable
1x temp
± 0,15 °C
max 1000 m
up to 31
RS-485
Industrial measurements, IP65 wall
mounting
Pt100 sensor on a 2m long cable
600 110
Temp-485-Pt100 Head
1x temp
± 0,2 °C
max 1000 m
up to 31
RS-485
External temp. sensor Pt100/Pt1000
600 111
Temp-485-Pt100 DIN
1x temp
± 0,2 °C
max 1000 m
up to 31
RS-485
External temp. sensor Pt100/Pt1000
600 112
Temp-485-2xPt100
2x temp
± 0,2 °C
max 1000 m
up to 31
RS-485
External temp. sensor Pt100/Pt1000
Sens-485-UI
1x voltage
1x current
± 0,5%
max 1000 m
up to 25
RS-485
1x input 0 .. 10V, 1x input 4 .. 20mA
600 120
Security door contact
1x contact
0/1
max 100 m
up to 3
Dry Contact Door opening detection
600 240
Flood detector
1x On/Off
0/1
max 100 m
up to 3
Dry Contact Flooding detection
600 235
Smoke detector
1x On/Off
0/1
max 100 m
up to 3
Dry Contact Smoke detection
600 236
Motion PIR detector
1x On/Off
0/1
max 100 m
up to 3
Dry Contact Movement detection
600 237
AC power detector
1x On/Off
0/1
max 100 m
up to 3
Dry Contact Voltage detection - 110/220 V
600 238
Air Flow detector
1x On/Off
0/1
max 100 m
up to 3
Dry Contact Air-flow detection
600 116
Installation accessories
The S-Hub and T-Box connecting units are recommended when installing more than two sensors.
These units also allow connecting sensors using existing structured cabling. A great advantage is the
possibility to choose the Y-connection or the ring connection. The connection is created using
structured cabling and standard RJ45 and RJ12 connectors.
Supported software
The Poseidon unit is supplied with the PN Eye software, which allows regular reading
and logging of the data, alarm reporting via email, or SMS using the GSM modem.
Tested with: Tecnomatix FactoryLink v7.5, SNMPc v5.1.6c, LoriotPro v3, MRTG, IBM
Tivoli, HP Open View, CA Unicenter TNG, NetDecision (NetMechanica) and more...
www.HW-group.com
Poseidon family
Poseidon models
Poseidon 1140
The oldest Poseidon model, designed for industrial environments. Everything
is led out on two Cannon 9 connectors, supports Temp-232 sensors and
Modbus/TCP interface.
Poseidon 1250
The 1140’s successor, the Cannon connector for 1-Wire and RS-485 bus is replaced by RJ12 and
RJ45. Allows sending emails, does not support Modbus/TCP.
Poseidon 3265
Low cost Poseidon model, designed only for one 1-Wire sensor. Alarms reporting supported via
SMS (GSM modem connected to the device), email and SNMP Trap.
Poseidon 2250
Expands the 1250 model with independent measured values logging. Includes its own real time
clock, it does not allow sending emails and it does not support Modbus/TCP.
Model 1140
Model 1250
Model 3265
Model 2250
Yes
Yes
Yes
Yes
-
-
-
40 000 records
1.. 43
1 .. 42
1 (up to 5)
1 .. 42
3, 4
5
6
5
RS-232 interface
Port2, DB9M
Port2, DB9M
Port2, DB9M
Port2, DB9M
RS-485 interface
Port1, DB9F
Port1, RJ45
No
Port1, RJ45
1-Wire interface
Port1, DB9F
Port 3, RJ11
Port 2, RJ11
Port 3, RJ11
Dry Contact Inputs
3x, Terminal block
3x, Terminal block
none
3x, Terminal block
Outputs for Relay
No
Yes, 2x (DB9M)
No
Yes, 2x (DB9M)
WEB interface
Yes
Yes
Yes
Yes
XML data interface
Yes
Yes
Yes
Yes
Modbus/TCP interface
Yes
No
Yes
No
SNMP data interface
Yes
Yes
Yes
Yes
SNMP Trap for Alarms
Yes
Yes, 2 destination
Yes, 2 destination
Yes, 2 destination
Emails for Alarms
No
Yes, 2 destination
Yes, 2 destination
No
GSM SMS for Alarms
No
No
Yes
No
HW Real Time Clock
No
No
No
Yes
Configuration SW
PN Eye 1140
PN Eye
PN Eye
PN Eye
Firmware update
WEB, RS-232
WEB, RS-232
WEB
WEB, RS-232
1.1.x - 1.8.x
1.9.x
3.x.x
2.x.x
Online sensor values
Logger capacity
Max Sensors quantity
HW version
Firmware versions
www.HW-group.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement