Medion X51 Operating instructions

Operating instructions
Multimedia PC
High-performance PC X50/X51
High-performance PC X71
High-performance PC X75
Multimedia PC
Click on the number of a control element to go to the relevant section in the operating instructions.
8
9
10
4
5
11
6
7
27 2
24
1
23
12
17
18
15
16
13
14
19
26
2
25
7
24
5
6
21
20
22
High-performance PC X50/X51
Click on the number of a control element to go to the relevant section in the operating instructions.
12
1
3
23
8
10
11
2
7
27
16
14
26
2
19
25
6
6
5
24
6
21
High-performance PC X71
Click on the number of a control element to go to the relevant section in the operating instructions.
2
23
27 6
7
5
1
11
8
9
10
12
17
18
13
15
14
16
19
26
2
25
7
24
5
6
21
20
22
High-performance PC X75
Click on the number of a control element to go to the relevant section in the operating instructions.
3
1
12
11
8
9
23
10
13
15
16
14
19/27
26
2
25
7
24
5
6
21
20
22
Connections
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
On/off switch/operating mode
Microphone socket*
Slot for Medion HDDrive2Go super-speed external hard drive*
Front panel*
eSATA connection*
USB 2.0 ports*
USB 3.0 ports*
Optical drive
Optical drive eject button
Hot-swap mobile rack*
Card reader*
Overclocking button*
D-Sub VGA monitor connection*
DVI-I/DVI-D monitor connection*
Mini HDMI connection*
HDMI connection*
TV aerial socket (analogue & DVB-T)*
TV aerial socket (DVB-S)*
Speaker/headphones*
Clear CMOS*
Optical/coaxial digital S/PDIF audio output*
PS/2 connection
Power supply (mains cable socket & mains switch)
IEEE 1394 (FireWire)*
LAN network (RJ45)
Audio input (line In, music recording)
Headphone socket*
*optional
Contents
1.About these instructions ........................................................................................................................................................ 4
1.1.Warning symbols and key words used in these instructions ..................................................................................................................... 4
1.2.Proper use ..................................................................................................................................................................................................................... 4
1.3.Declaration of conformity ....................................................................................................................................................................................... 4
2.Safety instructions .................................................................................................................................................................. 5
2.1.Dangers for children and people with reduced ability to operate machinery .................................................................................... 5
2.2.Operational safety ...................................................................................................................................................................................................... 5
2.3.Never carry out repairs yourself ........................................................................................................................................................................... 5
2.4.Data backup ................................................................................................................................................................................................................. 5
3.Package contents .................................................................................................................................................................... 6
4.Setting up the PC ..................................................................................................................................................................... 6
4.1.Installation location ................................................................................................................................................................................................... 6
4.2.Environmental requirements ................................................................................................................................................................................. 6
4.3.Ergonomics ................................................................................................................................................................................................................... 6
5.Connecting ............................................................................................................................................................................... 8
5.1.Connecting the cables ............................................................................................................................................................................................. 8
5.2.Opening and closing the front panel (optional) ............................................................................................................................................. 8
5.3.Connecting the microphone (optional) ............................................................................................................................................................. 8
5.4.Connecting SATA devices (optional) ................................................................................................................................................................... 9
5.5.Connecting USB devices (optional) ..................................................................................................................................................................... 9
5.6.Overclocking button (optional) ..........................................................................................................................................................................10
5.7.Connecting a monitor (optional) ........................................................................................................................................................................11
5.8.Connecting devices using the mini-HDMI socket (optional)....................................................................................................................11
5.9.Connecting a HDMI device (optional)...............................................................................................................................................................11
5.10.Connecting audio output / headphones /
speakers ..............................................................................................................................................................................................................................11
5.11.Connecting PS/2 devices (optional) ................................................................................................................................................................11
5.12.Connecting IEEE 1394 (FireWire) devices (optional)..................................................................................................................................12
5.13.Connecting a network (LAN) ............................................................................................................................................................................12
5.14.Aerial socket for TV reception (optional) .......................................................................................................................................................12
5.15.Analogue TV reception ........................................................................................................................................................................................12
5.16.DVB-T TV reception................................................................................................................................................................................................12
5.17.DVB-S TV reception ...............................................................................................................................................................................................12
5.18.Connecting audio input/recording source ...................................................................................................................................................12
5.19.Connecting power supply ..................................................................................................................................................................................12
6.First use .................................................................................................................................................................................13
6.1.Starting up the PC ....................................................................................................................................................................................................13
7.The mouse ..............................................................................................................................................................................14
8.The keyboard .........................................................................................................................................................................14
8.1.The Alt, Alt Gr and Ctrl buttons ...........................................................................................................................................................................14
9.The hard drive .......................................................................................................................................................................15
9.1.Important directories ..............................................................................................................................................................................................15
9.2.Hot-swap mobile rack (optional) ........................................................................................................................................................................16
9.3.Connecting an external hard drive (optional)................................................................................................................................................16
10.The optical drive (optional) ................................................................................................................................................17
10.1.Load disc ...................................................................................................................................................................................................................17
10.2.Playing/reading discs ...........................................................................................................................................................................................17
10.3.Blank CDs and DVDs .............................................................................................................................................................................................17
11.The card reader (optional) ..................................................................................................................................................18
11.1.Inserting the memory card.................................................................................................................................................................................18
11.2.Removing memory cards ....................................................................................................................................................................................18
12.The graphics system (optional) ..........................................................................................................................................19
12.1.Appearance and customisation ........................................................................................................................................................................19
13.The sound system ...............................................................................................................................................................19
14.IEEE 1394 (FireWire) (optional) ..........................................................................................................................................20
14.1.Possible uses for IEEE 1394 ................................................................................................................................................................................20
14.2.Technical specifications .......................................................................................................................................................................................20
1 of 36
15.USB connection (optional)..................................................................................................................................................20
16.The TV card (optional).........................................................................................................................................................20
17.Networking ..........................................................................................................................................................................20
17.1.What is a network? ...............................................................................................................................................................................................20
17.2.Wireless LAN (wireless network) .......................................................................................................................................................................21
18.Software ...............................................................................................................................................................................21
18.1.Getting to know Windows® 8 .............................................................................................................................................................................21
18.2.indows activation...................................................................................................................................................................................................21
18.3.Windows® 8 – What’s New ..................................................................................................................................................................................22
18.4.Overview ...................................................................................................................................................................................................................23
18.5.Linking a user account to a LiveID ...................................................................................................................................................................24
19.Control Panel .......................................................................................................................................................................27
19.1.Control panel settings ..........................................................................................................................................................................................28
19.2.Resetting the PC to its factory settings ..........................................................................................................................................................28
19.3.BIOS Setup ...............................................................................................................................................................................................................28
19.4.Clear CMOS (optional) ..........................................................................................................................................................................................29
19.5.Kaspersky Internet Security................................................................................................................................................................................29
19.6.Windows® 8 – Help and support .......................................................................................................................................................................30
20.FAQ – Frequently asked questions .....................................................................................................................................30
21.Customer service .................................................................................................................................................................30
21.1.First aid in the case of hardware problems ..................................................................................................................................................30
21.2.Find the cause .........................................................................................................................................................................................................30
21.3.Faults and possible causes..................................................................................................................................................................................31
21.4.Do you need more help? .....................................................................................................................................................................................31
21.5.Driver support .........................................................................................................................................................................................................31
21.6.Transport ..................................................................................................................................................................................................................31
21.7.Cleaning and care ..................................................................................................................................................................................................32
22.Upgrades/modifications and repairs .................................................................................................................................32
23.Recycling and disposal .......................................................................................................................................................33
23.1.Handling batteries .................................................................................................................................................................................................33
23.2.FCC Compliance Statement ...............................................................................................................................................................................33
24.Index.....................................................................................................................................................................................34
2 of 36
Personal information
Please append the following to your proof of ownership:
Serial numbers
................................................
(e.g. Microsoft®)
................................................
Purchase date, location
................................................
You will find the serial number on the back of the PC. Where applicable, also copy the number on your warranty documents.
Our target group
This operating manual is intended to be read by both first-time and experienced users. Regardless of any possible professional use, this PC is designed for use in a private household. The entire family will be able to enjoy the wide variety of applications
it offers.
The quality
We select our components with a close eye to functionality, ease of use, safety and reliability. Thanks to our ideally balanced
hardware/software concept we are able to offer you a state-of-the-art machine that you will enjoy whether you are working or
at play. Thank you for purchasing our products. We are delighted to welcome you as our new customer.
Copying this manual
This document contains legally protected information. All rights reserved. Mechanical, electronic and any other form of reproduction is prohibited without the written permission of the manufacturer.
Copyright 2012.
All rights reserved.
This operating manual is protected by copyright.
MEDION® is the owner of this copyright.
Trademarks:
MS-DOS® and Windows® are registered trademarks of the Microsoft® corporation.
Intel, the Intel Logo, Intel Inside, Intel Core, Ultrabook, and Core Inside are trademarks of Intel Corporation in the U.S. and/or
other countries.
Other trademarks are the property of their respective owners.
Subject to technical and optical changes as well as printing errors.
3 of 36
1.
About these instructions
Read these erating instructions carefully before using the device for the first time. Note the warnings on the device
and in the operating instructions.
Always keep the operating instructions close to hand. If you sell the appliance or give it away, please ensure that
you also pass on these instructions.
1.1.
Warning symbols and key words used in these instructions
DANGER!
Warning: immediate mortal danger!
WARNING!
Warning: possible mortal danger and/or serious irreversible injuries!
CAUTION!
Please follow the guidelines to avoid injuries and/or property damage.
ATTENTION!
Please follow the guidelines to avoid property damage.
PLEASE NOTE!
Additional information on using the device.
PLEASE NOTE!
Please follow the guidelines in the operating instructions.
WARNING!
Warning: danger of electric shock!
•

1.2.
Bullet point/information on operating steps and results
Tasks to be performed
Proper use
This device is intended for the use, management and editing of electronic documents and multimedia content and is only intended for personal use, not industrial/commercial use.
Please note that we shall not be liable in cases of improper use:
• Do not modify the device without our consent and do not use any auxiliary equipment which we have not approved or
supplied.
• Use only spare parts and accessories which we have supplied or approved.
• Follow all the instructions in these operating instructions, especially the safety information. Any other use is deemed improper and can cause personal injury or damage to the product.
• Do not use the device in extreme environmental conditions.
1.3.
Declaration of conformity
The telephone is delivered with the following wireless features:
• Wireless LAN (optional)
• Keyboard (optional)
• Mouse (optional)
Due to the output of the integrated wireless LAN solution, the device may only be used inside buildings in France. There are
currently no restrictions in any other EU countries. When using the device in other countries, please find out about the relevant legal regulations.
Medion AG hereby declares that this device conforms to the fundamental requirements and the remaining relevant regulations of the 1999/5/EC R&TTE Directive.
This product satisfies the basic requirements and relevant regulations of the Ecodesign Directive 2009/125/EC.
Full declarations of conformity are available at http://www.medion.com/conformity.
4 of 36
2.
Safety instructions
2.1.
Dangers for children and people with reduced ability to operate
machinery
•
•
•
This device is not intended for use by people (including children) with reduced physical, sensory or mental abilities or for
those without experience and/or knowledge, unless they are supervised by a person responsible for their safety or they
have been instructed in its use.
Children should be supervised to ensure that they do not play with the device. Children should not be allowed to use this
device without supervision.
Keep the device and its accessories out of reach of children.
DANGER!
Keep plastic packaging out of the reach of children. There is a risk of suffocation.
2.2.
Operational safety
Please read this section carefully and follow all instructions provided. The instructions will help you to operate the PC reliably
and help lengthen its service life.
• Never open the housing of the PC, battery or mains adapter! This could result in an electric shock or even ignite a fire
which will damage your PC.
• Never open the housing of the PC! There is a risk of electric shock when the housing is open. Never operate the PC when
the housing is open.
• The optical drives (CDRW, DVD, DVD-RW) are classified as laser class 1 equipment, as long as the housing of the optical
drive has not been removed. Do not remove the cover of the drive because invisible laser radiation can escape.
• Do not insert anything into the PC through the slots and openings. This could result in an electrical short-circuit, an electric
shock or even ignite a fire which will damage your PC.
• The slots and openings on the PC are for ventilation purposes. Do not cover these openings as this could cause the device
to overheat. When setting up the PC, ensure a minimum clearance of 20 cm on all sides.
• Avoid exposing the device to water droplets or spray and do not place any water-filled containers – such as vases – on the
device. Liquids penetrating the device may impair the electrical safety of the product.
Turn off the PC immediately/do not turn on the PC in the first place and contact the customer service department if ...
... the mains cable or the attached plug is scorched or damaged. Replace defective mains adapters/mains cables with original
parts only. These parts should not be repaired under any circumstances.
• ... the PC housing is damaged or liquid has penetrated it. Have the PC checked first by the customer service department.
Otherwise, it may not be possible to safely operate the PC and there may be a risk to life due to electric shock.
2.3.
Never carry out repairs yourself
WARNING!
Never try to open or repair the device yourself. There is a risk of electric shock.
•
If there is a fault, contact the MEDION Service Centre or other suitable specialist workshop.
2.4.
Data backup
ATTENTION!
Back up your data to external storage media before each update. We do not accept any liability for claims for compensation arising from loss of data or any consequential loss or damage.
5 of 36
3.
Package contents
Please check your purchase to ensure that all items are included. If anything is missing, please contact us within 14 days of
purchase. Note down the serial numbers here.
The PC you have purchased includes the following components:
• PC and connection cable
• Windows keyboard and mouse (optional)
• OEM version of the operating system (optional)
• Documentation
DANGER!
Keep packaging material such as plastic film away from children. There is a risk of suffocation if used
improperly.
4.
Setting up the PC
Setting up your PC correctly goes a long way towards ensuring comfortable operation.
4.1.
•
•
Keep your PC and all connected devices away from moisture and avoid dust, heat and direct sunlight. This will help to
avoid malfunctions or damage to the PC.
Place all devices onto a stable, flat and vibration-free surface and only operate them on this type of surface in order to prevent the PC malfunctioning.
4.2.
•
•
•
•
Installation location
Environmental requirements
The PC can be operated at ambient temperatures of +10°C to +35°C and a relative humidity of 30%–70% (non-condensing).
When switched off, the PC can be stored at temperatures from −20 to 50.
Pull out the mains plug during thunder storms and, in particular, remove the aerial cable (if present). For extra safety, we
recommend using an overvoltage protection device to prevent the PC from sustaining damage as a result of power surges
or lightning strikes.
After transporting the PC, wait until the device has reached ambient temperature before switching it on. Large changes in
temperature or fluctuations in humidity can cause moisture build-up within the PC due to condensation. This can cause an
electrical short circuit.
4.3.
Ergonomics
PLEASE NOTE!
Avoid dazzle, reflections and strong bright-dark contrast in order to protect your eyes.
The monitor should never be placed next to a window because this is the brightest part of the room during daylight. This
brightness can make it more difficult for the eyes to adjust to the darker monitor.
Always place the monitor so that the direction of vision is parallel to the window front (see image).
This parallel direction of vision should also be maintained in relation to any artificial lighting equipment. In other words, the
same criteria and principles apply where the workspace is illuminated with artificial light.
Where it is not possible to position the monitor as described, the following measures may be useful:
• rotating, lowering or tilting the monitor;
• using slats or vertical blinds on the windows;
• using partitions or changing the direction of the light source.
PLEASE NOTE!
Take regular breaks when working at your monitor to prevent tenseness and fatigue.
6 of 36
Sitting for long periods without changing your position can be uncomfortable. To minimise the risks of physical discomfort or
damage, correct posture is paramount.
• General – Alter your position frequently (every 20–30 minutes) and take frequent breaks to avoid fatigue.
• Back – When sitting at your workplace, the backrest of the office chair should be upright or tilted slightly backwards to
supported your back.
• Arms – Your arms and elbows should be relaxed and loose. Keep your elbows tucked in next to your body. Keep your forearms and hands almost parallel to the floor.
• Wrists – When working with the keyboard, mouse or trackball, your wrists should be kept as straight as possible and should
not be bent at an angle greater than 10°.
• Legs – Your thighs should lie horizontally or be tilted slightly upwards. Your lower legs should kept at an angle of approximately 90° to your thighs. Your feet should rest flat on the floor. Where possible, use a footrest, otherwise, ensure that the
seat is adjusted to the correct height before starting work.
• Head – Your head should be kept straight or inclined slightly forward. Do not work with your head or upper body twisted.
•
•
•
•
•
Hand rest area: 5–10 cm
Viewing distance: 50 to 70 cm
Leg room (vertical): 65 cm (min.)
Leg room (horizontal): 60 cm (min.)
The top line of the screen should be at eye height or a little below.
7 of 36
5.
Connecting
For better orientation, please open out the left-hand inside cover page to fully display the diagrams showing the positions of
the connections described.
PLEASE NOTE!
The devices listed are not necessarily supplied! The connections listed are optional and are not necessarily present on
your PC.
5.1.
Connecting the cables
Follow the instructions below to connect your PC correctly and safely:
• Position the cable so that it cannot be stepped on or tripped over.
• To avoid damaging the cable, do not place any objects on it.
• Do not expose plug connections to impacts/pressure, e.g. from lateral forces. This could cause internal and external damage to the device.
• Do not apply force when connecting cables and plugs and make sure that connectors are the right way round.
• When you disconnect a cable from your device, pull it out by holding the plug and not the cable.
• In order to prevent short-circuits and cable breaks, do not crush or bend cables.
• Connect peripheral devices, such as keyboards, mouse and monitor, etc., only when the PC is switched off to avoid damage
to the PC or the devices. Some devices may also be connected while the PC is running.
This is often the case for USB devices. In all cases, ensure that the information provided in the relevant operating instructions is observed.
• Maintain a distance of at least one metre from sources of high-frequency and magnetic interference (TV sets, loudspeakers, mobile phones, DECT telephones, etc.) in order to avoid malfunctions and data loss.
• Please note that only shielded cables that are shorter than 3 metres may be connected to the external interfaces of this PC.
Please only use double-shielded cables for printer cable connections.
• Do not exchange the supplied cable for another one. Use only the supplied cable as this cable has been extensively tested
in our laboratory.
• When connecting your periphery devices, also ensure that you only use the connection cables supplied with those devices.
• Ensure that all connection cables are connected to their corresponding periphery device to avoid any interference radiation. Disconnect any cables that are not required.
• The only devices which may be connected to the PC are those which meet the requirements set out in the EN60950 standard “Information Technology Equipment – Safety” or the EN60065 standard “Audio, video and similar electronic apparatus –
Safety requirements”.
•
During the first few hours of use, new products may give off a characteristic but totally harmless smell. This is unavoidable
and disappears over time.
To help reduce the amount of odour build-up, we recommend that you ventilate the room at regular intervals. We have
taken appropriate measures during the development of this product to ensure that levels are well below legal limits.
PLEASE NOTE!
The devices listed are not necessarily supplied. You only need to connect those components you intend to operate on
your PC. If you do not have the device described, you can skip the point in question or carry it out later, as required.
5.2.
Opening and closing the front panel (optional)
Some connections are located behind the front panel. This offers the advantage of making it quick and easy to connect frequently used devices without having to turn the PC around. The closable panel also protects the connections.
5.3.
Connecting the microphone (optional)
 Connect a microphone to the pink socket using a 3.5 mm mono jack plug.
 Position the microphone so that it does not point directly at the speakers. This prevents acoustic feedback (perceptible by
a loud whistling).
8 of 36
5.4.
Connecting SATA devices (optional)
eSATA stands for “external Serial ATA” and is a connection for external hard drives. Compared with the conventional USB
standard, the transfer speed with an eSATA connection is higher than with external USB hard drives.
PLEASE NOTE!
In order to prevent damage to the contacts, make sure that the plug and the socket fit together perfectly. Due to its
asymmetric form, the plug will only fit into the socket in one position.
 Plug the cable into the eSATA socket on the front of your PC.
5.4.1.
Disconnecting SATA Devices
 Before disconnecting a SATA hard drive from your PC, click the Safely remove hardware icon in the task bar below and
then click on the hard drive to be removed.
5.5.
Connecting USB devices (optional)
ATTENTION!
Do not connect your USB devices until you have finished the initial setup of your new PC. This will prevent any unnecessary interference during the installation. These devices can generally be connected while the PC is running. Please refer to
the operating manual for your peripheral device.
•
The PC’s USB voltage outputs are protected by a fuse (limited power source in accordance with EN60950). This ensures that
peripheral devices connected using the sockets in question cannot be damaged in the event of a technical fault with the
PC.
You will usually have several connection sockets available that you can use as desired.
PLEASE NOTE!
In order to prevent damage to the contacts, make sure that the plug and the socket fit together perfectly. Due to its
asymmetric form, the plug will only fit into the socket in one position.
 Plug the device (printer, scanner, camera, etc.) into the appropriate socket.
PLEASE NOTE!
Where possible, always connect your devices to the same port that they were originally installed on. Otherwise they will
be assigned a new ID and the drivers will need to be reinstalled.
9 of 36
5.6.
Overclocking button (optional)
Your computer is delivered with an application that enables you to overclock the processor. This is useful if you want higher
performance for certain applications, such as video editing or games.
Depending on your computer model, you enable overclocking…
• using the button in the MEDION® ERAZER® Control Center,
• using the OC switch on the computer’s front cover or
• using the OC switch on the back of the computer.
Regardless of how you enable or disable overclocking, you will always need to restart your computer. When you launch the
MEDION® ERAZER® Control Center, a corresponding notification will appear.
ATTENTION!
Back up your data on external storage media after each update or change. We do not accept any liability for claims for
compensation arising from loss of data or any consequential loss or damage.
5.6.1.
Processor overclocking using the button in the MEDION® ERAZER® Control Center
 Launch the MEDION® ERAZER® Control Center by double-clicking the desktop shortcut.
 User Account Control will inform you that changes are being made to your computer. Confirm the query with Yes. You will
see the program’s main page with some information regarding your computer.
 Open the OC Genie tab.
 Click the OC Genie button to enable overclocking. A message prompts you to restart your computer.
PLEASE NOTE!
Your computer may be fitted with an OC switch on the front cover or on the back. If so, then this button has a purely informational purpose. Disable indicates that overclocking is disabled; if the button shows Enable, overclocking is enabled.
 To disable overclocking, click the Enable button and restart your computer.
5.6.2.
Processor overclocking using the OC switch on the front cover
If your computer has an OC switch on its front cover, you simply need to press the switch in order to overclock the processor
(the switch should click into position).
Restart your computer for the change to take effect. If you have launched the MEDION® ERAZER® Control Center, a corresponding notification will appear on the screen.
To disable overclocking, press the switch again and restart your computer.
5.6.3.
Processor overclocking using the OC switch on the back of the computer
If an OC switch is fitted on the back of your computer, you simply need to press the switch in order to overclock the processor
(the switch should click into position).
Restart your computer for the change to take effect. If you have launched the MEDION® ERAZER® Control Center, a corresponding notification will appear on the screen.
To disable overclocking, press the switch again and restart your computer.
5.6.4.
Making settings in the MEDION® ERAZER® Control Center
After activating processor overclocking, you can make a number of settings using the MEDION® ERAZER® Control Center.
For example, you can regulate the overclocking using the settings under CPU
Ratio. After making a change, you will need to restart your computer.
PLEASE NOTE!
A warning will appear if you make settings that are not supported by your computer.
The MEDION® ERAZER® Control Center is also a monitoring tool that shows you information about the motherboard, memory
and processor. The data provided is purely for information purposes and cannot be changed.
10 of 36
5.7.
Connecting a monitor (optional)
Your PC is equipped with a VGA and/or a DVI connection.
PLEASE NOTE!
If your monitor has multiple inputs (e.g. VGA and DVI), only ever connect one data cable at a time (to prevent signal
mapping problems).
To prevent damage to the contacts, ensure that the plug and socket fit together exactly. Due to its asymmetric shape, the
plug will only fit into the socket in one position.
 Connect your monitor’s data cable to the graphics connection on your PC. Remove the white protective ring (if present) on
the monitor plug.
 Tighten the screws hand tight when connecting a VGA or DVI device to the monitor cable.
5.8.
Connecting devices using the mini-HDMI socket (optional)
HDMI is an abbreviation for “High Definition Multimedia Interface”, which is an interface for the fully digital transfer of audio
and video data.
 You can connect output devices to this socket if they have a corresponding connection.
5.9.
Connecting a HDMI device (optional)
HDMI is an abbreviation for “High Definition Multimedia Interface”, which is an interface for the fully digital transfer of audio
and video data.
 You can connect a TV, monitor or projector to this socket if it has a corresponding connection.
5.10.
Connecting audio output / headphones /
speakers
Connect active loudspeakers here for playback or an audio connection cable for recording. Read the operating instructions for
your stereo system to see which input you need to use (usually Line in or Aux).
 Plug the cable into the green socket on the back of the PC using the 3.5 mm stereo jack plug.
5.10.1.
Connecting headphones
Connect headphones/earphones here.
 Plug the cable into the green socket on your PC using the 3.5 mm stereo jack plug.
WARNING!
Excessive volume when using headphones or earphones can damage your hearing. Before pressing play, set
the volume to the lowest setting. Start playback and increase the volume to a comfortable level. Changing
the basic settings of the equaliser can also increase the volume and thus cause permanent damage to your
hearing. Changing the drivers, software, equaliser, operating system, etc., can also lead to an increase in the
volume and thus cause permanent damage to your hearing.
Listening to a device at high volumes for an extended period via headphones/earphones can damage your
hearing.
5.10.2.
PCs with surround sound (optional)
Connect a surround sound system as follows:
 Plug the cable for the front speaker into the green socket labelled FS.
 Connect the speakers for the rear sound to the RS connection.
 Connect a central speaker or a subwoofer to the CS socket.
 Connect additional speakers for the rear sound area to the SS socket.
A digital audio output (SPDIF) (optional) may be connected using an optical or coaxial cable.
 Plug an optical cable into the optical socket or a coaxial cable into the coaxial socket.
 Connect the other end of the cable to an audio device with a corresponding digital input.
5.11.
Connecting PS/2 devices (optional)
If you wish to connect a USB mouse or USB keyboard, then connection of a PS/2 mouse or keyboard is not necessary.
 Connect the mouse cable to the green PS/2 port.
 Connect the keyboard cable to the blue PS/2 port.
11 of 36
5.12.
Connecting IEEE 1394 (FireWire) devices (optional)
ATTENTION!
Do not connect your IEEE 1394 devices until you have finished the initial setup of your new PC. This will prevent any unnecessary interference during the installation. These devices can generally be connected while the PC is running. Please
refer to the operating manual for your peripheral device.
•
The PC’s IEEE 1394 voltage outputs are protected by a fuse (limited power source in accordance with EN60950). This ensures that peripheral devices connected using the sockets in question cannot be damaged in the event of a technical fault
with the PC.
PLEASE NOTE!
In order to prevent damage to the contacts, make sure that the plug and the socket fit together perfectly. Due to its
asymmetric form, the plug will only fit into the socket in one position.
 Connect the IEEE 1394 cable to your PC’s IEEE 1394 port.
5.13.
Connecting a network (LAN)
You can prepare your PC for network operation using the network socket.
A network cable usually has two RJ45 plugs meaning it does not matter which end is plugged into which socket.
 Plug one end of the network cable into the PC socket.
 Connect the other end to another PC or a hub/switch.
For more information see the chapter “Network Operation”.
5.14.
Aerial socket for TV reception (optional)
5.15.
Analogue TV reception
 Connect the TV socket on your TV card to your terrestrial aerial or cable TV.
5.16.
DVB-T TV reception
Where DVB-T and digital services are offered locally, you can make use of these services by connecting an appropriate aerial
(not supplied).
 Connect a DVB-T aerial to the TV socket on your TV card.
5.17.
DVB-S TV reception
You can watch television from your digital satellite system via the DVB-S socket.
 Connect your satellite system to the TV socket on your TV card.
5.18.
Connecting audio input/recording source
This socket is used to connect external analogue audio sources (e.g. stereo system, synthesizer).
 Plug the connection cable into the light blue socket using the 3.5 mm stereo jack plug.
5.19.
Connecting power supply
Finally, connect the power supply for your PC and the monitor.
 Plug the power cable into the socket and connect it to your PC’s mains cable socket.
Please note the following safety advice:
DANGER!
Even when the mains switch is off, some components of the device are live. In order to disconnect the power to
your PC or to completely isolate the device from voltage sources, remove the mains plug from the mains
socket.
•
•
•
•
The socket must be close to the PC and easy to access.
Only operate the PC on earthed socket outlets of the household electricity network.
Only use the mains connection cable supplied.
For extra safety, we recommend using an overvoltage protection device to prevent your PC from sustaining damage as a
result of power surges or lightning strikes.
• The standard PC mains adapter has an on/off switch. This can be used to turn the PC on or off. When the switch is at OFF
(0), no power is being consumed.
Do not start up your PC yet!
First read the next chapter for some helpful tips on initial operation.
12 of 36
6.
First use
The operating system and all hardware drivers are already preinstalled. You do not need to run any of the discs supplied.
For some programs (e.g. telephone CDs or encyclopaedias, it may be necessary to insert the relevant disc in order to call up
the data saved on it. Where this is the case, the software will prompt you to do this.
Once all connections have been established and all necessary connections have been screwed tight, you can start up your PC:
6.1.
Starting up the PC
 Switch the monitor on.
 Switch on the mains switch by moving it to position I. (Set this switch to 0 to disconnect the power supply).
 Press the On/Off switch once to turn on your PC.
Your PC will now start up and run through the various startup steps.
PLEASE NOTE!
There should be no bootable disk (e.g. the recovery disc) in the optical drive as this will prevent the operating system
from being loaded from the hard drive.
The operating system is loaded from the hard drive. The loading process takes a little longer during the initial setup. Once all
the necessary data has been entered, the operating system will be set up. The operating system is fully loaded once the Windows® 8 startup screen appears.
NOTE!
The initial installation may take a few minutes. Do not unplug the PC from the mains or switch it off during the initial installation. This may adversely affect the installation. Do not switch the PC off until after the installation has been completed successfully and the startup screen appears.
Follow the instructions on the screen. Step-by-step instructions will guide you through the process to be followed.
The welcome procedure takes you through several screens and dialogues.
 Select your desired language and then the desired country.
Licence agreement
Please read through the licence agreement carefully. It provides important legal information about the use of your software
product. To view the text in full, you must slide the scroll bar downwards using the mouse until you reach the end of the document. You accept the licence agreement by checking the I accept the agreement radio button. Only this entitles you to use
the product in accordance with the terms and conditions.
After entering a computer name, you can connect your PC to the Internet immediately on the “Wireless” page (if you already
have a WLAN system installed or have an access point).
If you choose to skip this point, you can connect to the Internet later via the Windows® 8 interface.
If you have already set up an Internet connection, you can now log in to your PC using a Microsoft account.
The Microsoft Store allows you to purchase new apps or update previously installed apps.
If you log in on a local account, you can set up a Microsoft account later at any time.
The following animated windows simply contain information about using the new Windows® 8 operating system.
No entries of any kind may be made during the animation.
The Windows® 8 interface appears after the login process.
PLEASE NOTE!
In the first few days following the initial installation, Windows may update and configure data (e.g. with new updates)
which can result in delays in the PC shutting down and starting up. For this reason, do not switch the PC off prematurely.
This may adversely affect the installation.
13 of 36
7.
The mouse
In addition to the two buttons, the mouse also has a wheel. Turn or press the wheel to scroll through documents or Internet
pages.
PLEASE NOTE!
The wheel can also be used as a button. The assignment depends on the application in question. In Word, for example, the cursor changes shape and the screen display scrolls up or down in the appropriate direction when the mouse is
moved.
If the mouse pointer cannot be moved smoothly across the screen, please try using a different surface (mouse pad). Glass or
metal surfaces may prove problematic.
8.
The keyboard
This section contains useful information about using the keyboard.
8.1.
The Alt, Alt Gr and Ctrl buttons
The Alt key is used in combination with other keys to perform particular functions. These functions are determined by the
program being used. To enter a keyboard shortcut with the Alt key, press and hold down the Alt key while you press the other key. The Alt Gr key works in a similar way to the Alt key, but is used to obtain special characters. The Ctrl key (Control) performs program functions in the same fashion as the Alt key. Useful keyboard shortcuts (dependent on software):
Keyboard shortcut
Function and description
Alt + F4
Usually exits the selected program or closes the open window.
Alt + Print
Copies an image of the currently selected window to the Clipboard.
Alt Gr + ß
Alt Gr + E
The backslash ( \ ) is produced.
The euro symbol is produced.
Alt Gr + Q
Produces an @ as required for e-mails.
Ctrl + Alt + Delete
Starts the “Windows Security” dialogue.
(Country-specific deviations are possible)
14 of 36
9.
The hard drive
The hard drive is your main memory medium and combines high storage capacity with rapid data access.
Your PC is supplied with an OEM version** of the Microsoft Windows® operating system which supports all of the PC’s performance features. We have configured your PC’s hard drive so that you will be able to work with it optimally without having to
install any additional drivers yourself.
The Windows® operating system requires part of the capacity to manage the hard drive therefore the hard drive’s full capacity is not available. This explains any differences between the BIOS display and the operating system display. The PC’s operating
system, other applications and security data are located on the hard drive, therefore the full capacity is already reduced.
PLEASE NOTE!
Never try to switch off the PC while it is accessing the hard drive as this can result in data loss.
The first partition (C:\) contains the operating system, the applications and the “Documents” folder for the configured user.
The second partition (D:\) is used for the data backup and also contains drivers
(D:\Drivers) and utilities (D:\Tools) for your PC.
PLEASE NOTE!
The startup files for system restoration and the Windows® 8 installation files are located in non-rewritable partitions.
These partitions are not visible and cannot be deleted.
9.1.
Important directories
We have listed the most important directories below and described their contents.
ATTENTION!
Do not delete or modify these directories or their content otherwise data may be lost or system functionality may be impaired.
C:\
The C: drive root directory contains important files required for Windows® startup. On delivery these files are hidden for security reasons.
C:\Programs
As the name suggests, software programs install the files required for running the application into this directory.
C:\Windows
The main Windows directory. The operating system saves its files here.
D:\Drivers
You will find all the (preinstalled) drivers required for your PC in this folder.
D:\Tools
Here you will find additional programs and other documentation for your PC.
D:\Recover
Here you will find the recovery files that can be used to restore your PC to its factory settings.
**
Original equipment manufacturer/program versions purchased from the manufacturer which are usually sold in conjunction with end devices
15 of 36
9.2.
Hot-swap mobile rack (optional)
You can connect an additional external hard drive using the hot-swap mobile rack.
PLEASE NOTE!
Please note that only the above-mentioned mobile rack may be used.
9.3.
Connecting an external hard drive (optional)
Your PC has a slot which allows you to connect the MEDION HDDrive2Go super speed external hard drive quickly and easily
via the USB 3.0 port.
As with a USB memory stick, the connection can be made while the operating system is running. The hard drive is then automatically detected as removable storage and is assigned a drive letter.
PLEASE NOTE!
Please note that only the above-mentioned Medion hard drive may be plugged into the hard drive slot.
This slot is only compatible with the Medion HDDrive 2 Go super speed hard drives. All other former generation HDDrive
2Go hard drives cannot be used!
Medion HDDrive 2Go super speed hard drives are not supplied.
As soon as the hard drive is plugged into the hard drive slot, your PC will recognise it as removable storage.
ATTENTION!
To protect the connections, the plugs are fitted with dust covers which must be removed prior to use. When not in use,
the covers must always be refitted.
The Medion HDDrive 2Go super speed hard drive is available in the following sizes:
• Medion HDDrive 2Go super speed 6.35 cm/2.5" USB 3.0 hard drive and
• Medion HDDrive 2Go super speed 8.89 cm/3.5" USB 3.0 hard drive.
16 of 36
10.
The optical drive (optional)
10.1.
Load disc
ATTENTION!
Do not use scratched, broken, dirty or poor quality discs. Do not stick protective film or other adhesive labels to the discs.
The high speeds in the drive can cause these to break destroying your data and damaging your device. Inspect discs
carefully before inserting them. If damage or dirt is visible, do not use the disc. Damage caused by faulty media is not
covered under warranty and repairs will be chargeable.
 Press the eject button on the optical drive to open the drawer.
 Insert the disc into the drawer, label up, so that it lies flat.
 Check that the disc can turn freely and then carefully slide the drawer back into the optical drive until it clicks into place.
On delivery, your optical drive is assigned the drive letter “E”. You can easily access the data on your discs using Windows
Explorer (Computer). Run Windows Explorer using the shortcut on the taskbar or by simultaneously pressing the Windows
key and the “E” key. When accessing DVD videos (or audio and video files on conventional data CDs), the preinstalled media player is used automatically.
 If you wish to remove a disc, press the eject button.
ATTENTION!
Do not try to remove the disc from the drive while the PC is accessing the optical drive.
10.1.1.
Removing the disc
 To remove the disc, press the eject button again.
 Take the disc out and place it in a CD case.
 Close the drive again.
10.2.
Playing/reading discs
PLEASE NOTE!
Many discs run automatically when they are inserted. This depends on the operating system and the relevant settings.
Your PC is capable of playing audio CDs, DVD movies or data discs from the optical drive.
Once a disc has been loaded, a dialogue box opens containing various playback options. Normally, there will be a number of
different options available.
Playback of DVD film titles includes decoding MPEG2 video, digital AC3 audio data and decoding CSS-protected content. CSS
(sometimes also referred to as Copy Guard) is the name of a data protection program used by the film industry to protect
against illegal copying. Among the many controls for CSS licensees, the most important of the playback restrictions involve
country-specific content. To make it easier to create geographically separate film releases, DVD titles are coded for specific regions. Copyright laws required that each DVD film be limited to a specific region (usually the region where it is sold). DVD film
versions can be published in multiple regions but CSS rules require that each CSS decoder system may only be used for one
region.
ATTENTION!
The region setting can be changed up to five times via the viewing software before the last setting becomes permanent. If you then wish to change the region setting again, this must be carried out by the manufacturer. Any shipping
and configuration costs must be borne by the user.
10.3.
Blank CDs and DVDs
Normal CDs are pressed by a glass master and then sealed. With blank discs, digital information is burned onto them using the
drive’s laser. They are therefore more sensitive then conventional discs.
Because of this, it is essential to avoid, particularly in the case of unused blanks:
• exposure to direct sunlight (UVA/UVB radiation)
• scratches and damage
• extreme temperatures
17 of 36
10.3.1.
Important information about high-resolution video formats (optional)
Depending on the model, your system may come with a Blu-ray drive.
The Blu-ray drive uses a technology that supports high-resolution video formats. You can still play the following media using
your drive:
• Audio CDs
• CD-R
• CD-RW
• DVD+R/DVD-R
• DVD+RW/DVD-RW
To be able to play back the new video format and new media (Blu-ray discs), the following prerequisites must also be met:
PLEASE NOTE!
Windows Media Player does not support any high-resolution video formats.
•
•
The playback software must be updated via the Internet at regular intervals to ensure it can always play back the latest titles. The update intervals will be specified by the software providing there is an Internet connection.
When connecting to a digital output sources (e.g. TFT monitor or LCD TV), the connections (DVI or HDMI) must support the
HDCP standard. You can find this information in the operating instructions for your output device.
11.
The card reader (optional)
If your PC has a card reader, you can also use the card types below as follows:
Card type
SD (Secure Digital)
MMC (MultiMediaCard)
Memory stick
Memory Stick Pro
Connection contacts
pointing downwards
pointing downwards
pointing downwards
pointing downwards
When inserting the memory cards, ensure that the contacts are pointing in the right direction, as specified in the list below. Inserting a card incorrectly may damage the card reader and/or the card.
11.1.
Inserting the memory card
PLEASE NOTE!
The memory cards can only be inserted in one direction. Please observe the instructions in the section above.
 Slide the card in as far as it will go.
When a card is inserted into a slot, it will be assigned a free drive letter* by the system (as long as it is removable storage).
11.2.
Removing memory cards
 Pull the card out of the slot and store it properly.
18 of 36
12.
The graphics system (optional)
12.1.
Appearance and customisation
This program gives you the option of customising the appearance on your monitor. This includes the background image, the
screensaver and other settings for your monitor and your graphics card. The program can be started as follows:
• Right-click on the Windows desktop and left-click on Personalise.
or
•



Via Settings, Personalisation, Display by double-clicking with the left mouse button.
Move the mouse pointer into the top right or bottom corner of the display and click
Settings.
Then click Personalisation.
First select the Display option from the dialogue box.
The following settings options are available:
− Set resolution
− Set brightness
− Calibrate colour
− Change display settings
− Display on second monitor
− Customise ClearType text
13.
The sound system
The external audio connections can be configured so that you can connect a surround sound system.
If you wish to change the default volume, click the loudspeaker icon in the task bar.
WARNING!
Excessive volume when using headphones or earphones can damage your hearing. Before pressing play, set
the volume to the lowest setting. Start playback and increase the volume to a comfortable level. Changing the
basic settings of the equaliser can also increase the volume and thus cause permanent damage to your hearing. Changing the drivers, software, equaliser, operating system, etc., can also lead to an increase in the volume
and thus cause permanent damage to your hearing.
Listening to a device at high volumes for an extended period via headphones/earphones can damage your
hearing.
19 of 36
14.
IEEE 1394 (FireWire) (optional)
The IEEE 1394 connection, also known as iLink® or FireWire, is a serial bus standard for the rapid transfer of digital TV/video, PC
and audio data.
14.1.
•
•
•
Connection of digital entertainment devices, such as: set top boxes, digital video recorders and camcorders, digital versatile discs (DVDs), televisions, etc.
Multimedia applications and video editing.
Input and output devices such as printers, scanners, etc.
14.2.
•
•
•
•
Possible uses for IEEE 1394
Technical specifications
Depending on the application, the maximum data transfer rate is 100, 200 or 400 Mbit/s which represents a data throughput of up to 50 MB per second.
The devices can be connected and removed while the machine is running (hot plugging).
The standardised cable (shielded twisted pair – STP) contains 6 wires. Two wires are used for power (8 V to 40 V, 1.5 A max.)
and can be used for the external power supply. The four signal wires are used to transfer data and control information.
Many devices do not need power via the cable so four pin plugs are used.
The voltage output in the 6-pin IEEE 1394 connection is protected by a fuse (limited power source in accordance with
EN60950).
15.
USB connection (optional)
PLEASE NOTE!
Devices connected directly to the USB BUS may not draw more than 500 mA. The voltage output is protected by a fuse
(limited power source in accordance with EN 60950). If the devices require a higher output, then it will be necessary to
purchase a hub (distributor/booster).
Up to 127 devices compatible with the USB standard can be connected to the sockets for USB (Universal Serial Bus 1.1 and
2.0). The USB 3.0 sockets are fully backwards compatible with USB 2.0 and 1.1.
PLEASE NOTE!
Where possible, always connect your USB devices to the same port that they were originally installed on. Otherwise they
will be assigned a new ID and the drivers will need to be reinstalled.
16.
The TV card (optional)
To receive a TV signal using the TV tuner, an analogue aerial, DVB-T aerial or a digital SAT* system must be connected.
ATTENTION!
Disconnect the aerial when the device is not being used, especially during thunderstorms. This will protect your device
from possible
lightning strikes.
Audio or video recordings require a lot of memory (up to approx. 2.4 GB/hour). Back up any non-necessary files onto external media such as CD-Rs or hard drives.
17.
Networking
Your PC is provided with a Fast Ethernet-Network connector.
17.1.
What is a network?
We talk about a network when several PC’s are connected to one another.
This allows users to transfer information and data from PC to PC and to share their resources (printers, modem and drives).
Here are a few concrete examples:
• In an office messages are exchanged by e-mail and appointments are managed centrally.
• Users share one printer on the network and back up their data to a central computer (server).
• Two or more PCs are connected to one another to play network games or exchange data.
**The optional SAT socket on your PC is a DVB-S2 socket for high-resolution satellite TV reception. This only enables playback of released and unencrypted
programs.
20 of 36
17.2.
Wireless LAN (wireless network)
Your PC is equipped with WLAN. The components (module, aerials) are already built into your PC and enabled. You can disable
this function using the Windows® device manager if required.
Wireless LAN enables you to establish a network connection to a corresponding remote station.
17.2.1.
Security notice
ATTENTION!
Do not operate your PC’s wireless LAN function in areas where there are radio-sensitive devices (e.g. in hospitals, etc.). If
you are unsure whether the use of these devices will result in damage or interference, disable this option.
17.2.2.
Requirements
A so-called LAN access point can be used as a remote station. An access point is a radio-transmitting device that communicates with your PC and controls access to the connected network. LAN access points are frequently found in large offices, airports, train stations, universities and Internet cafés. They provide access to particular services and networks or to the Internet.
Access permissions are generally necessary and often result in usage charges. Access points often have built-in DSL modems.
These so-called routers establish the connection to the existing DSL Internet connection and the wireless LAN. A connection
can also be established without an access point to another end device with wireless LAN functionality. Without a router, however, the network is restricted to those devices directly connected to it.
The wireless network connection works in accordance with the IEEE 802.11n standard* and is compatible with the IEEE
802.11b/g standard. Other standards (802.11a etc.) are not supported.
If encryption is used for the transfer, the same procedure must be used for all devices. Encryption is a procedure to protect the
network from unauthorised access.
The transfer speed can vary depending on the distance and the number of users accessing the remote station.
18.
Software
This section deals with the topic of software. We distinguish here between the operating system, the software (the applications), the Windows activation and the BIOS.
18.1.
Getting to know Windows® 8
Windows® 8, the new operating system from Microsoft, contains a series of innovative functions and new technologies that
your PC uses to work quickly and reliably, and is also easy to use.
18.2.
Windows activation
To protect against software piracy, Microsoft has introduced product activation. The Windows® 8 version installed on your PC/
supplied with the PC must be activated to enable use of all Windows® 8 functions.
To do this, you require simply an Internet connection. The activation process is fully automatic; no personal data will be transmitted.
If no Internet connection is available, select telephone activation as follows:







Move the mouse pointer into the top right or bottom corner of the display and click
Settings.
Next, click Change PC settings.
Select the Activate Windows item.
Now click Activate by phone.
Click Next after choosing your country.
Call one of the specified hotlines on the telephone and read out the column of figures displayed when prompted to do so.
You will then be given a confirmation ID over the telephone.
Enter this in the empty field and click Activate.
PLEASE NOTE!
If you have not activated Windows® 8, not all functions will be available to you under PC settings. A watermark will also
continue to be displayed at the bottom right on the traditional desktop.
* To make use of the full performance, a WLAN router compatible with the 802.11n standard is required.
21 of 36
18.3.
Windows® 8 – What’s New
Microsoft account
A Microsoft account is an e-mail address and password for logging in to Windows. You may use any e-mail
address. We recommend using the address you use to communicate with friends and log into your favourite web sites, however. The Microsoft account also allows you to purchase or download apps from the Store and install them on up to five devices.
Once you have logged on to your PC using a Microsoft account, you also have access to the various services and programs
provided by Microsoft.
• The contact information and status updates for your friends from services such as Hotmail, Facebook, Twitter and LinkedIn
will be updated automatically as soon as you run these services using your Microsoft account.
• You can also access and share your photos, documents and other files via
SkyDrive, Facebook and Flickr.
• Your personal settings, including designs, language settings, Internet favourites and apps will be synchronised with each
PC running Windows® 8 that you log on to.
• You can obtain Apps from the Windows Store. You can use these on any PC running Windows 8 that you log on to.
If you wish to create a Microsoft account in Windows® 8, proceed as following:
Settings.
 Move the mouse pointer into the top right or bottom corner of the display and click
 Click Change PC settings > Users > Switch to a Microsoft account.
Taskbar (Desktop mode)
You can start programs from the taskbar at the bottom of the screen and switch between programs already running. In Windows® 8 you can place any program onto the taskbar, so that you can always open it with a single click. You can also rearrange
the icons on the taskbar by simply clicking on them and dragging them to the desired position. Move the mouse pointer over
the icons and thumbnails of each file or each window open in that program will be displayed. If you move the mouse pointer over the thumbnail, a full screen preview of the window in question appears. When you move the mouse pointer away from
the thumbnail again, the full screen preview closes.
Jump lists
Jump lists offer a practical way of calling up recently opened files. To display the recently used files, simply right-click on the
application icon in the taskbar. Thus if you right-click on the Word icon, the recently used Word documents are displayed. You
can also easily place other files you wish to have easily to hand in the jump list so that they are always displayed. This allows
you to access documents that you use frequently in just a few mouse clicks.
The jump lists for certain programs such as Windows® Media Player can be populated in advance with frequently used commands. Thus, for example, you will see options to play all music or to reopen the last playlist in the jump list for Windows® 8
Media Player.
The frequently visited and last visited websites are displayed in the jump list for Internet Explorer. This therefore allows you
to quickly access commands for certain programs that could previously only be called up from the program itself, such as the
command to compose a new e-mail message.
Improved desktop
Windows® 8 simplifies working with windows on the desktop. You therefore have more intuitive options for opening and closing, changing sizes and rearranging.
Windows® 8 makes completing everyday tasks even simpler. The locking function (snaps) makes it easier to compare two open
windows, for example. You do not need to manually adjust the size of the opened windows for the comparison. Simply drag
the window to one of the screen margins using the mouse and it will fill half of the screen.
Click the window’s title bar, “shake” it and all other opened windows are displayed as icons on the task bar. “Shake” the window
once more and the other windows are displayed again.
Better device management
Windows® 8 allows you to connect, manage and use all devices via the central “Devices” function.
All devices are shown in a central location.
With the new “Device Stage” technology, however, Windows® 8 goes one step further with device management. Device Stage
helps you when using all compatible devices that are connected to the computer. Thanks to Device Stage you can now display
the device status and perform frequently used commands within a single window. Here you will even find images of the devices so you can easily see which devices are connected. The device manufacturers can even adjust Device Stage. For example,
if your camera manufacturer releases an updated version of Device Stage, you can see details such as the number of photos
on the camera and get links to useful information when you connect the camera to your PC.
22 of 36
HomeGroup
With home network groups, a Windows® 8 function, connecting home computers is child’s play. A home network group is set
up automatically when you connect the first PC running Windows® 8 to the home network. Adding additional PCs running
Windows® to the home network group can be done very quickly. You can specify precisely what should be shared on each PC
with all other PCs in the home network group. Sharing files on the various home PCs – and on many other devices – is then as
easy as if all the data were located on a single hard drive. Thus, you can save digital photos on the computer in the study and
then access them easily on a laptop in any other room. Similarly, the printer in the study is automatically shared among all PCs
in the house once they are part of the home network group.
18.4.
Overview
The greatest innovation in Windows® 8 is the Start screen. This key element replaces the Start menu in Windows® 8.
Here you can run all the main programs and services.
As with previous versions, operation is by inputting commands using the mouse or keyboard.
The Start screen can be opened at any time using the
(Win) key. This key also allows you to switch back and forth between
the Start screen and an active application. To switch to an application other than the last one opened, press the Win+Tab keyboard shortcut.
A key element of the Start screen is the tiles which each represent an application or function. They are shown in blocks and
you can define the number of blocks and their columns yourself.
Drag & drop the tiles to the desired position using the mouse.
Logging in to Windows
To be able to work with Windows® 8, you must set up a Windows® 8 user account.
 Move the mouse pointer into the top right or bottom corner of the display, move the mouse down and click
 Next, select Change PC settings.
 Open the Users category.
 Select Add a user, to set up additional user accounts.
Settings.
Windows® 8 allows you to log in to Windows using 3 different login procedures. Windows® 8 gives you the choice of standard login by password, a PIN or an image code To set up a PIN or image code, you must first have set up a password for Windows.
18.4.1.




18.4.2.




Setting up a password for Windows
Move the mouse pointer into the top right or bottom corner of the display and click
Next, click Change PC settings.
Select the Users item.
Click Change your password and follow the instructions.
Settings.
Setting a PIN for Windows
Move the mouse pointer into the top right or bottom corner of the display and click
Next, click Change PC settings.
Select the Users item.
Click Create a PIN and follow the instructions.
Settings.
Setting up an image code for Windows




Move the mouse pointer into the top right or bottom corner of the display and click
Next, click Change PC settingsn.
Select the Users item.
Click Create a picture password and follow the instructions.
Settings.
PLEASE NOTE!
The image code login has been specially designed for touch screen devices.
In devices without a touch screen, use the mouse instead of finger movements or gestures.
PLEASE NOTE!
To be able to use the Microsoft Store you need to log in using a Microsoft account.
23 of 36
18.5.
Linking a user account to a LiveID
You can link your user account to a LiveID. This enables you to log in to any computer or mobile device connected to the Internet using your LiveID.
 Move the mouse pointer into the top right or bottom corner of the display, move the mouse down and click
Settings.
 Next, select Change PC settings.
 Open the Users category.
 Select Switch to a Microsoft account.
 Now enter your Windows Live ID e-mail address.
If you have not yet created a Windows Live ID account or added an e-mail
address to your Windows Live ID account, you can create and edit your Windows Live ID account at http://www.windowslive.com/ .
 Follow the instructions on the screen to complete the link.
Windows® 8 Start screen
Once the operating system is running, you will see the new Windows® 8 Start screen.
(Image similar)
Information such as the following may be displayed here for example:
Windows® 8
App
Windows® 8 apps are executable programs.
The “Desktop” tile opens the traditional Windows display.
The Internet Explorer tile launches Internet Explorer
PLEASE NOTE!
Apps are applications that are displayed on a desktop with a program thumbnail. The app thumbnails are bigger than
the standard tiles.
24 of 36
18.5.1.
Windows® 8 Desktop
This image shows a symbolic representation of additional programs.
(Image similar)
Information such as the following may be displayed here for example:
Classic
desktop
apps
Desktop apps are applications that are displayed on a desktop with a program thumbnail. The app
thumbnails are bigger than the standard tiles.
The classic “Power Recover” desktop app launches the system recovery program.
The classic “Microsoft Office” desktop app launches the Microsoft Office program.
Windows® 8 apps from third party suppliers are displayed as follows. Example:
Windows® 8
apps from
third-party
suppliers
These Windows® 8 apps are executable programs from third-party suppliers.
This Windows® 8 app launches the “PowerDVD” program.
This Windows® 8 app launches the “YouCam” program.
25 of 36
18.5.2.
Working with Windows® 8 and classic apps
Menu
Opening an app
Instructions
 Click the desired app with the left mouse button.
Closing an app
PLEASE NOTE!
Not all apps need to be closed! Windows closes unused apps automatically.
 Press the Alt+F4 keyboard shortcut.
 Click on the top edge of the running app and drag the app down to the edge of the display.
Displaying all apps
 Right-click on the Start screen.
 Click All apps in the bottom right hand corner of the display.
Linking apps
to the Start screen




Right-click on the Start screen.
Click All appss in the bottom right hand corner of the display.
Right-click on the desired app to highlight it.
Click Pin to Start in the bottom left hand corner of the display.
Linking apps to the taskbar




Right-click on the Start screen.
Click All apps in the bottom right hand corner of the display.
Right-click on the desired app to highlight it.
Click Pin to Taskbar in the bottom left hand corner of the display.
Installing an app
 Run the Shop app.
 Search for the desired app and click Install. The app will now be downloaded and installed in the background.
Uninstalling an app




Running apps as
administrator
(only possible with desktop
apps )
 Right-click the desired app.
 Now click Run as administrator on the bottom edge of the display.
Running an app in a new window (only possible with desktop apps)
 Right-click the desired app.
 Click Open new window at the bottom edge of the display.
Searching for apps
 Move the mouse pointer into the top right-hand corner of the display, move the mouse
down and click Search.
 Enter the name of the app.
Arranging apps
 Click and hold the left mouse button down on the desired app and drag it to the desired
position.
Selecting multiple apps
 Right-click the desired apps.
18.5.3.
Right-click on the Start screen.
Click All apps in the bottom right hand corner of the display.
Right-click the desired app.
Click Deinstallieren at the bottom edge of the display.
PLEASE NOTE!
Not all apps can be uninstalled. If the Uninstall option is not displayed, this app
can not be uninstalled.
Using the search function
Use the search function to find individual tasks, settings or apps quickly.
 Move the mouse pointer into the top right or bottom corner of the display and click Search.
 Enter the name of the app or file and select an entry from the results list on the left-hand side of the display.
The search results are arranged by apps, settings and files. Select the (Apps, Settings or Files) category that contains the desired file.
26 of 36
19.
Control Panel
The Control Panel allows you to customise the Start interface.
 Move the mouse pointer to the top right or bottom corner of the display and click
 Next, click Change PC settings.
Menu
Settings.
Instructions
Activate Windows
 Activate Windows by telephone or over the Internet.
Personalise
 Set the background image for the
lock screen and the Start screen here.
 Select a profile image here.
User
 Create and update user accounts here.
Set or modify the PIN or image code.
Notifications
 Set the various program instructions to On or Off here.
Search
 Define the settings for the search function here.
 Define the app the search function should work with here.
Share
 Define the settings for the share function here.
 Define the apps to be shared here.
General




Privacy
 Configure the security settings for apps, accounts and Windows® 8 here.
Devices
 Install additional external connected devices here, e.g. joystick or USB speakers.
 Enable or disable Download over metered connections. This function prevents drivers for newly
added devices being searched for and downloaded via the Internet.
Wireless
 Enable or disable flight mode here.
 Enable or disable the integrated WLAN function here.
Ease of Access
 Customise the contrast, mouse pointer and tab bar to your requirements here.
Configure the general settings for time zone, spell checking, language and memory here.
Reinstall the operating system without losing personal user data or key basic settings.
Restore your PC to its factory settings.
Perform a reboot with a CD inserted.
Sync your settings  Configure synchronisation of your PC with the connected network.
 Configure here whether or not an online synchronisation should also be performed with payable
networks.
HomeGroup
 Here you will see the home network group and the apps and files shared within it.
Windows Update
 Allow Windows to search the Internet for any necessary Windows updates.
19.5.1.
Windows® 8 power on/off functions
The new Windows® 8 allows you to restart your PC, put it into Sleep mode or shut it down.
Changes can be made to the Sleep settings at any time in the power options.
In Sleep Mode the content of your PC’s RAM is preserved while practically all other components of your PC are disabled or
their power consumption reduced to a minimum.
Restart
 Move the mouse pointer into the top right or bottom corner of the display, move the mouse down and
click
Settings.
 Now click Power and select Restart.
Your PC will now restart.
Sleep
 Move the mouse pointer into the top right or bottom corner of the display, move the mouse down and
click
Settings.
 Now click Power and select Sleep. Your PC will now switch to sleep mode.
Shut down
 Move the mouse pointer into the top right or bottom corner of the display, move the mouse down and
click
Settings.
 Now click Power and select Shut down.
27 of 36
19.1.
Control panel settings
You can change Windows® 8 settings using the control panel. These settings control virtually everything about how Windows®
8 appears and functions and enable you to customise Windows® 8 to meet your requirements.
When the control panel is run for the first time, some of the most frequently used control panel elements are displayed
grouped together by category.
If you require additional information about a control panel element in the category view, you must hold the mouse pointer
over the icon or category name and read the text shown there.
To run one of these elements, click on the associated icon or category name.
A list with executable tasks and a selection of individual control panel elements opens for some of these elements.
To launch the control panel, proceed as follows:
 Move the mouse pointer into the top right or bottom corner of the display and click Search.
 Enter System control in the search field.
 Click on System control.
19.2.
Resetting the PC to its factory settings
In the event of problems with the installation or other software problems which make it necessary to reinstall the software,
Windows® 8 offers three options for reinstalling Windows® 8 on your PC.
First ensure that you have backed up all important data and programs.
19.2.1.
Running system restore
 After restarting, press the F11 key or start up the PC with the F11 key held down to launch PowerRecover.
or
 Click the PowerRecover Windows® 8 desktop app to run the program from the Windows® 8 desktop.
You will be offered 3 possible options:
− Burn drivers and tools on an optical disc
Create a support disc
− Refresh your PC without affecting your files
Update your PC without deleting your data.
− Restore
Choose between two recovery options:
● Restore to HDD – no backup of user data
All data on the PC will be permanently deleted.
The factory settings will be restored.
● Restore to HDD – with backed up user data
The factory settings will be restored and all user data under C:\USER will be backed up.
PLEASE NOTE!
Always perform any type of recovery using mains power.
ATTENTION!
The recovery process takes a long time when you select the option to back up user data. Only the data located in the
folder C:\USER will be backed up. All other data will be deleted. Therefore, always regularly carry out a data backup onto
an external data medium. We do not accept any liability for claims for compensation arising from the loss of data or any
consequential damages incurred.
 Click Next and follow the on screen instructions to restore the factory settings.
19.3.
BIOS Setup
BIOS setup (the basic hardware configuration of your system) offers you numerous configuration options for operating your
PC.
For example, you can modify the operating mode for interfaces, security features or power supply management.
ATTENTION!
The PC has already been configured by the manufacturer to ensure optimum operation. Please only change settings
where strictly necessary and if you are familiar with the configuration options.
28 of 36
19.3.1.
Running the Bios setup
You can only run the configuration program upon system startup. If the PC has already been started, shut down Windows®
and restart it.
Before the PC reboots, press the “Del” key and hold it down until the message “Entering Setup” appears.
19.4.
Clear CMOS (optional)
PLEASE NOTE!
If, contrary to expectations, you have changed settings that result in the PC becoming unstable, you can delete the
CMOS memory using the Clear CMOS button and restore the BIOS to its factory settings.
19.5.
Kaspersky Internet Security
Kaspersky Internet Security is a comprehensive tool to protect your data. The use of it not only offers you full protection
against viruses, but also against spam and attacks against your network. Further components of the software will protect your
computer against threats and phishing attacks unknown up to now and allows the access to the Internet to be restricted sensibly. Full protection will cover all areas of data transfers and exchanges.
Kaspersky Internet Security is already installed, so that additional installation will not be necessary. If you nevertheless have
to carry out an installation (e.g. after system restoration), you will find the software package on the Application & Support disc
supplied with the machine.
Kaspersky Internet Security consists of the following security components:
•
•
•
File Anti-Virus
File Anti-Virus will protect the file system of the computer against infection. The components will be started when the operating system is started. They will be permanently located in the working memory of the computer and will check all the
files that are opened, saved or started on your computer and all the connected hard drives. Kaspersky Internet Security will
intercept any attack on a file and will check the respective file for known viruses. A file will then only be released for use if it
is virus-free or has been successfully disinfected by the program.
Mail Anti-Virus
Mail Anti-Virus will check the incoming and outgoing emails on your computer. An email will only be delivered to the respective recipient if it does not contain any dangerous elements.
Web Filter / Child Protectio
The Web Filter will block visits to dangerous web pages and will create a safe working environment during Internet surfing
in this way. Child protection allows access to Internet resources and programs to be restricted flexibly for different users of
the computer depending on age.
PLEASE NOTE!
Kaspersky Internet Security will be activated automatically if the Internet connection is active. Manual activation will not
be necessary. Kaspersky Internet Security will be deactivated automatically after a test period. We recommend the acquisition of a licence in good time, to ensure the optimum protection of your computer, for this reason.
The Kaspersky Internet Security Package will be updated with the most up-to-date virus information for a test period after the
free registration. Read the activation information about this on the internet at: http://www.Kaspersky.com.
PLEASE NOTE!
The operating system and anti-virus software are automatically updated when the first online connection is made. These processes usually take a few minutes, during which time the operating speed of the computer may be affected although this is only noticeable on initial start-up.
29 of 36
19.6.
Windows® 8 – Help and support
Here you will find a comprehensive collection of instructions, help sections and troubleshooting suggestions.
This help covers the entire spectrum of the Windows operating system.
It is recommended for both beginners and experts. The information is subdivided into topics and can be printed out or bookmarked. Start as follows:
 Move the mouse pointer into the top right or bottom corner of the display, move the mouse down and click
Settings.
 Now click on Help.
 Choose the topic you are interested in.
20.
FAQ – Frequently asked questions
Do I need to install the discs supplied?
− No All programs are preinstalled. The discs are provided as backup copies only.
Where can I find the necessary drivers for my PC?
− The drivers can be found in the second hard drive partition in the
Drivers and Tools folders.
What is Windows activation?
− You will find a relevant section in these operating instructions containing detailed information on this topic.
How do I activate Windows?
− Windows is activated automatically as soon as an Internet connection is established.
How do I activate Windows without an Internet connection?
− Windows can also be activated over the telephone. Follow the instructions in the Windows Activation section to activate Windows by telephone.
When is restoring factory settings recommended?
− This method should only be selected as a last resort. Read about the alternatives in the System Recovery section.
How do I perform a data backup?
− Perform a backup or backup synchronisation of selected data onto external media to familiarise yourself with the technology. A backup is of no use if you are unable to recover the data or if the medium is faulty or is no longer available.
Why do I need to reinstall my USB device even though I have already done it?
− If the device is not operated on the same USB port as the one it was installed in, it automatically receives a new identifier. The operating system then treats it like a new device and tries to reinstall it.
− Use the installed driver or connect the device to the port on which it was originally installed.
21.
Customer service
21.1.
First aid in the case of hardware problems
Malfunctions can sometimes have quite trivial causes, but they may also be the result of defective components. We have included a brief troubleshooting guide below which may help to solve any problems.
If these tips don’t do the trick, then we’ll be more than pleased to help you out. Just give us a call!
21.2.
Find the cause
Start by carefully checking all the cable connections. If the indicator lamps are not on, ensure that the PC and all peripheral
devices are connected to the power supply.
• Check the plug, power cable and all switches in the socket circuit.
• Turn off the PC and check all cable connections. If the PC is connected to peripheral devices, check all cable connections.
Do not swap around the cables for the various devices, even if they look alike. The polarity of the various cables may be different. Once you have ensured that the device is powered and all connections are intact, then switch the PC back on.
30 of 36
21.3.
Faults and possible causes
The screen is black.
 Check that the PC has not gone into hibernation.
Wrong time and date displayed.
 Click the clock display in the taskbar. Select the
Datums- und Uhrzeiteinstellung ändern option and enter the correct values.
Cards in the card reader are assigned a different drive letter after rebooting.
 This can happen when the card reader updates its slot during system start up. New IDs may then be assigned which can
lead to different drive letters for some cards.
No data can be read by the optical drive.
 Check whether the disc has been inserted correctly.
Mouse does not work.
 Check the cable connection.
Insufficient hard disk space.
 Audio or video recordings require a lot of storage space (up to approx. 1.2 GB/hour) Backup any unnecessary files to CD-Rs,
DVDs or other external media, e.g. the MEDIONHDDrive 2Go super speed hard drive.
The PC does not boot.
 If all the cable connections are correct, try resetting the PC mains adapter. Set the power switch on the back of the PC to
the 0 position (OFF). Then hold down the main switch on the front for 10 seconds. Wait another 5 seconds and restart the
PC.
Apps (e.g. the weather app) can not be displayed as live tiles.
 Check the date, time zone and time.
21.4.
Do you need more help?
You’ve checked through the suggestions in the previous section and you’re still having problems with your device? Then call
the hotline in the country where you purchased your PC. You can find the relevant telephone numbers on the inside cover of
these operating instructions.
We will try to help you over the telephone. Before contacting us, however, prepare the following information:
• Have you made any upgrades or modifications to the initial configuration?
• What peripheral devices do you use?
• What messages, if any, appear on the screen?
• What software were you using when the problem occurred?
• What steps have you already taken to try and
rectify the problem?
21.5.
Driver support
The system has been thoroughly and successfully tested with the installed drivers in our test laboratory. It is normal in the
computer sector, however, for the drivers to need updating from time to time.
This is because there may be compatibility problems with other components (programs, devices) which have not yet been
tested.
You can find current drivers on the Internet at the following address: www.medion.com.
21.6.
Transport
Please observe the following when transporting your PC:
• In order to avoid any transport damage, pack the PC away its original packaging.
31 of 36
21.7.
Cleaning and care
By observing the following instructions, you can extend the operating life of your PC:
ATTENTION!
None of the parts inside the housing require cleaning or maintenance.
•
•
•
•
Always unplug the device and disconnect all cables before cleaning. Clean the PC with a damp, lint-free cloth.
Dust can clog up the vents which can lead to overheating and malfunctions. At regular intervals (approx. every 3 months),
check that the vents are providing a sufficient level of air circulation. Use a vacuum cleaner to remove the dust from the
vents. If your device regularly attracts a lot of dust, then we also recommend that the interior of the PC housing is cleaned
by a specialist.
Do not use solvents, corrosive or aerosol detergents.
Do not use CD-ROM cleaning discs or similar products that clean the lens of the laser to clean your optical drive (CD/DVD).
The laser does not need cleaning.
22.
Upgrades/modifications and repairs
Upgrades and modifications to your PC should only be carried out by qualified specialists. If you do not possess the required
qualifications, have the work carried out by a suitably qualified service technician. Please contact your customer service if you
have technical problems with your PC.
If a repair must be carried out, please contact only our authorised service partners.
22.7.1.
Information for service technicians
Disconnect all electricity and connection cables before opening the housing. If the PC is not disconnected from the power
supply before opening, there is a risk of electric shock. There is also a risk of components being damaged.
Internal components in the PC can be damaged by electrostatic discharge (ESD). Carry out repairs, as well as system upgrades
and modifications, at an ESD workplace. If such a workplace is not available, wear an antistatic cuff or ensure you are touching
an earthed, metallic object. We will charge for any repairs to damage caused by incorrect handling.
Only use original replacement parts.
WARNING!
A lithium battery is located on the motherboard. This battery must not be charged. In addition, it must not be subjected
to high temperatures or fire. Keep children away from the battery. If the battery is improperly replaced, there is a danger
of explosion. Replace the batteries only with the same or equivalent type (CR 2032). Batteries are hazardous waste and
must be disposed of properly.
22.7.2.
•
•
Information on laser radiation
The PC may contain laser equipment classified as laser class 1 to laser class 3b. The device set-up fulfils the requirements of
laser class 1.
By opening the housing of the optical drive, you will have access to laser equipment classified up to laser class 3b.
The following should be observed when removing and/or opening this laser equipment:
•
•
•
•
The integrated optical drive contains no parts that require repair or maintenance.
Repairs to the optical drive should only be carried out by the manufacturer.
Do not look directly into the laser beam, even when using optical instruments.
Do not expose the laser beam. Avoid exposing your eyes or skin to the laser beam – either directly or through scattered laser radiation.
32 of 36
23.
Recycling and disposal
If you have any questions about disposal, please contact your sales agent or our service centre.
Packaging
Your device has been packaged to protect it against transportation damage. Packaging is raw material and can be
re-used or added to the recycling system.
Device
At the end of its life, the device should not be disposed of in household rubbish. Enquire about the options for environmentally friendly and appropriate disposal.
Batteries
Do not dispose of used or defective batteries in the household rubbish! They should be taken to a collection point
for used batteries.
23.1.
Handling batteries
Batteries may contain combustible materials. If not handled correctly batteries can leak, become very hot, ignite or even explode, which could damage your appliance and/or your health.
It is very important that you follow the instructions below:
• Keep batteries away from children. Contact your doctor immediately if a battery is swallowed.
• Never charge batteries (unless they are designed to be recharged).
• Never discharge the batteries by means of high power output.
• Never short-circuit the batteries.
• Never expose the batteries to excessive heat such as sunlight, fire or similar.
• Do not dismantle or deform the batteries. You could injure your hands or fingers or battery fluid could come into contact
with your eyes or skin. If this happens, rinse the affected areas immediately with plenty of clean water and contact your
doctor immediately.
• Avoid heavy impacts and vibrations. Always observe the correct polarity. Make sure that the plus (+) and minus (−) poles
are correctly inserted to avoid short circuits.
• Do not mix up new and old batteries or different types of batteries. This could cause your device to malfunction. In addition, the weaker batteries would discharge too much.
• Remove spent batteries from the device immediately.
• Remove the batteries from the device if you do not intend to use it for a long period of time.
• Replace all of the old batteries in a device with new batteries of the same type.
• Cover the contacts of the batteries with sticky tape if you want to store or dispose of them.
• Before inserting the batteries, check that the contacts in the device and on the batteries are clean and, if necessary, clean
them.
• Do not dispose of used batteries in the household rubbish! Please protect our environment and dispose of batteries in the
correct manner. If you have any questions, please ask your dealer or our customer service department – thank you!
23.2.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment gener-ates, uses, and can radiate radio frequency energy and, if not installed and used in accor-dance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate the equipment. Shielded interface cables, if any, must be used in order to comply with the emission limits.
33 of 36
24.
Index
B
Batteries ...................................................................................................................................................................................................................................
Battery disposal ....................................................................................................................................................................................................................
Better device management ..............................................................................................................................................................................................
BIOS
Clear CMOS .........................................................................................................................................................................................................................
33
33
22
29
C
Cabling ....................................................................................................................................................................................................................................... 8
CD-ROM ................................................................................................................................................................................................................................... 17
Cleaning................................................................................................................................................................................................................................... 32
Cleaning agents .................................................................................................................................................................................................................... 32
Connecting ............................................................................................................................................................................................................................... 8
Audio input ......................................................................................................................................................................................................................... 12
Audio output ...................................................................................................................................................................................................................... 11
IEEE 1394 (FireWire) .......................................................................................................................................................................................................... 12
LAN ....................................................................................................................................................................................................................................... 12
Microphone........................................................................................................................................................................................................................... 8
Monitor ................................................................................................................................................................................................................................. 11
Overclocking button........................................................................................................................................................................................................ 10
PS/2 mouse ......................................................................................................................................................................................................................... 11
Recording sources ............................................................................................................................................................................................................ 12
Speakers ............................................................................................................................................................................................................................... 11
Control panel ......................................................................................................................................................................................................................... 28
Control Panel.......................................................................................................................................................................................................................... 27
Data protection ................................................................................................................................................................................................................. 27
Devices.................................................................................................................................................................................................................................. 27
General ................................................................................................................................................................................................................................. 27
Home network group ...................................................................................................................................................................................................... 27
Notifications........................................................................................................................................................................................................................ 27
Search.................................................................................................................................................................................................................................... 27
Sharing.................................................................................................................................................................................................................................. 27
SimplifiedOperation......................................................................................................................................................................................................... 27
Synchronise settings ........................................................................................................................................................................................................ 27
User ....................................................................................................................................................................................................................................... 27
WindowsActivate .............................................................................................................................................................................................................. 27
Windows Update............................................................................................................................................................................................................... 27
Wireless................................................................................................................................................................................................................................. 27
Customer service .................................................................................................................................................................................................................. 30
D
Declaration of conformity ................................................................................................................................................................................................... 4
Directories ............................................................................................................................................................................................................................... 15
Disc drive ................................................................................................................................................................................................................................. 17
Driver support ....................................................................................................................................................................................................................... 31
E
Environmental temperature ............................................................................................................................................................................................... 6
F
Factory settings..................................................................................................................................................................................................................... 28
System restore using Cyberlink PowerRecover ...................................................................................................................................................... 28
G
Graphics card ......................................................................................................................................................................................................................... 19
Graphics system .................................................................................................................................................................................................................... 19
H
Hard disk ..................................................................................................................................................................................................................................
Hard drive................................................................................................................................................................................................................................
Hardware problems .............................................................................................................................................................................................................
HD. See hard disk
Help and support .................................................................................................................................................................................................................
HomeGroup............................................................................................................................................................................................................................
15
15
30
30
23
I
Initial operation..................................................................................................................................................................................................................... 13
Installation location ............................................................................................................................................................................................................... 6
34 of 36
J
Jump lists................................................................................................................................................................................................................................. 22
L
Laser radiation .......................................................................................................................................................................................................................
Logging in to Windows ......................................................................................................................................................................................................
Linking a user account to a LiveID ..............................................................................................................................................................................
Setting a PIN for Windows .............................................................................................................................................................................................
Setting up an image code for Windows....................................................................................................................................................................
Setting up a password for Windows ..........................................................................................................................................................................
32
23
24
23
23
23
M
Maintenance .......................................................................................................................................................................................................................... 32
Mouse ....................................................................................................................................................................................................................................... 14
N
Network
LAN access point ...............................................................................................................................................................................................................
What is a network? ...........................................................................................................................................................................................................
Wireless LAN .......................................................................................................................................................................................................................
Networking.............................................................................................................................................................................................................................
21
20
21
20
O
Operating safety ..................................................................................................................................................................................................................... 5
Operation
Keyboard .............................................................................................................................................................................................................................. 14
Mouse.................................................................................................................................................................................................................................... 14
Optical drive ........................................................................................................................................................................................................................... 17
P
Power supply ......................................................................................................................................................................................................................... 12
R
Reinstalling Windows® 8 ....................................................................................................................................................................................................
Repairs ......................................................................................................................................................................................................................................
Restarting ................................................................................................................................................................................................................................
Running the Bios setup ......................................................................................................................................................................................................
28
32
27
29
S
Safety
Batteries................................................................................................................................................................................................................................ 33
Safety instructions
Cabling.................................................................................................................................................................................................................................... 8
Connecting............................................................................................................................................................................................................................ 8
Power supply ...................................................................................................................................................................................................................... 12
Saving energy ........................................................................................................................................................................................................................ 27
Service engineers ................................................................................................................................................................................................................. 32
Setting up the PC ................................................................................................................................................................................................................... 6
Sleep .......................................................................................................................................................................................................................................27
Software
Getting to know Windows® 8 ....................................................................................................................................................................................... 21
Windows® 8 – What’s New ............................................................................................................................................................................................. 22
Windows activation.......................................................................................................................................................................................................... 21
Sound system ........................................................................................................................................................................................................................ 19
T
The multi-card reader
Memory Stick...................................................................................................................................................................................................................... 18
Memory Stick Pro .............................................................................................................................................................................................................. 18
MMC....................................................................................................................................................................................................................................... 18
Removing memory cards ............................................................................................................................................................................................... 18
SD ....................................................................................................................................................................................................................................... 18
Transport ................................................................................................................................................................................................................................. 31
Troubleshooting ................................................................................................................................................................................................................... 30
U
Upgrades/modifications .................................................................................................................................................................................................... 32
USB
.......................................................................................................................................................................................................................................20
35 of 36
W
Windows® 8 desktop ........................................................................................................................................................................................................... 25
Desktop apps...................................................................................................................................................................................................................... 25
Windows® 8 Start screen.................................................................................................................................................................................................... 24
Windows® 8 app ................................................................................................................................................................................................................ 24
Wireless LAN........................................................................................................................................................................................................................... 21
Working posture
Arms......................................................................................................................................................................................................................................... 7
Back ......................................................................................................................................................................................................................................... 7
General ................................................................................................................................................................................................................................... 7
Head......................................................................................................................................................................................................................................... 7
Legs ......................................................................................................................................................................................................................................... 7
Wrists ....................................................................................................................................................................................................................................... 7
Working with apps ............................................................................................................................................................................................................... 26
36 of 36