datasheet for 01111000 by Toradex

datasheet for 01111000 by Toradex
Colibri Fastener
Datasheet
Revision History
Date
Doc. Rev.
Colibri Fastener Version
Changes
22-Oct-07
Rev. 1.0
V1.00
Initial release
08-Nov-07
Rev. 1.1
V1.00
Added UL compliance
08-Feb-11
Rev. 1.2
V1.00
Added additional mounting instructions
Toradex AG l Altsagenstrasse 5 l 6048 Horw l Switzerland l +41 41 340 80 85 l www.toradex.com l [email protected]
Contents
1.
Introduction .................................................................................................................. 3
2.
Mounting ..................................................................................................................... 3
3.
Material ....................................................................................................................... 4
4.
Drawings...................................................................................................................... 5
Toradex AG l Altsagenstrasse 5 l 6048 Horw l Switzerland l +41 41 340 80 85 l www.toradex.com l [email protected] l
Page 2
1. Introduction
The Colibri Fastener is made for a better fixation of the Colibri on its carrier board. Two of them
can be inserted into prefabricated holes on the carrier board. After this, the Colibri module can be
easily clipped into the locking mechanism of the Colibri Fastener.
2. Mounting
All carrier boards from Toradex provide mounting holes for two Colibri Fasteners. The following
pictures show you how to install the Colibri Fasteners and fix the Colibri computer module firmly in
its SO-DIMM socket.
Inserting the Colibri module is critical, if done wrong the Colibri can break due mechanical
stress! Please look for the Colibri Fastener Video on our Webpage for more detailed information
about the insertion process.
Toradex AG l Altsagenstrasse 5 l 6048 Horw l Switzerland l +41 41 340 80 85 l www.toradex.com l [email protected] l
Page 3
If you are using a self designed carrier board, please consider the following drawings to locate the
mounting holes properly.
3. Material
The Colibri Fasteners consist of polyamide plastic which meets the UL 94 HB standar
Toradex AG l Altsagenstrasse 5 l 6048 Horw l Switzerland l +41 41 340 80 85 l www.toradex.com l [email protected] l
Page 4
4. Drawings
Toradex AG l Altsagenstrasse 5 l 6048 Horw l Switzerland l +41 41 340 80 85 l www.toradex.com l [email protected] l
Page 5
Disclaimer:
Toradex AG reserves the right to make changes, without notice, to any product, including circuits
and/or software described or contained in this datasheet.
Toradex AG assumes no responsibility or liability for the use of the described product(s), conveys no
license or title under any patent, copyright, or mask work rights to these products, and makes no
representations or warranties that these products are free from patent, copyright, or mask work
right infringement, unless otherwise specified.
Trademark Acknowledgement:
Brand and product names are trademarks or registered trademarks of their respective owners.
Toradex AG l Altsagenstrasse 5 l 6048 Horw l Switzerland l +41 41 340 80 85 l www.toradex.com l [email protected] l
Page 6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement