Event Input/Output Module: Model PUME (EDS11

Event Input/Output Module: Model PUME (EDS11
PUM Series
Multi-loop module type
Temperature controller
Event input/output module [PUME]
DATA SHEET
PUME
PUME is a digital input / output module used as an auxiliary
input / output of control modules. Each module, 30mm
wide, is equipped with 8 points of digital input, 8 points of
digital output, and high-speed RS-485 port. By connecting
with PUM control modules, it realizes a compact and highperformance system.
FEATURES
I. User-friendly structure and functions
1. Lateral connection : Max.16 units + control module 16
units = total 32 units
Simple wiring for power supply and communication
2. Detachable structure: Terminal block, main unit, and
the base part
→ Easy wiring with detachable terminal blcok
→ Main units exchangeable without re-wiring
3. Status LED for each input/output
→ Easy to monitor input / output status
4. Smart loader communication: Connect one module
and all connected modules are able to communicate
using a loader software.
II.Large scale system using high speed RS-485
1. Modbus RTU protocol for large volume communication
2. High-speed communication: Maximum 115.2kbps
3. Highly-efficient communication: Parameters dispersed
on the address map are re-allocated to contiguous
address
III.Various functions to extend control module functions
1. Digital input
(Optional feature : logic operation NOT/AND/OR)
<Functions set by DI function of control module>
- Run / Standby switch
- Auto / Remote / Manual switch
- Start timer
- Others
2. Digital output
(Optional feature : logic operation NOT/AND/OR)
- Control output (including distribution output)
- Alarm output
- Timer output
- Others
SYSTEM SPECIFICATION
1. Product type: Multi-loop module type temperature
controller
2.Module type
1)Analog module: Total maximum 16 units
a)Control module (4 loop/unit)
b)Extended input/output module
-Analog input/output module
(Input/output 4 points/unit)
-Analog input module (Input 4 points/unit)
-Analog output module (output 4 points/unit)
2)Extended input/output (digital) module:
Maximum 16 units
-Event input/output module
(Input/output ; 8 points/unit)
3) Enhanced communication module: 1 unit
3.Connecting method:
Lateral connecting with connectors
-For power supply and RS-485 communication,
any one of connected modules is required to be
connected.
4.No. of loop, input/output
1)Control loop:
Max. 64
2)No.of input / output: DI 128 points / DO 128 points
EDS11-167a
Date
Apr. 1, 2011
PUME
EVENT INPUT/OUTPUT MODULE
SPECIFICATION
1. General specification
(1) Power supply: 24V DC ±10%
(2) Power consumption: Max. 3.2 W (135 mA)
[when 24V DC is applied]
(3) Insulation resistance: 20MΩ or more (500V DC)
(4) Withstand voltage:
Power supply ↔ digital input ↔ digital
output ↔ communication terminal
1000V AC 1 min.
Others (digital input between blocks,
digital output between blocks)
500V AC 1 min.
(5) Applied standards:
UL, C-UL, CE marking, RoHS directive
[Pending for UL, C-UL marking]
2. Digital Input
(1) No. of input: 8 points (4 points/common × 2 blocks)
(2) Input type:
Voltage contact input, sink/source common (bidirectional)
(3) Input rating: 24V DC, input impedance approx. 4.7kΩ
(4) Input judgment:
ON judgment: 16 to 26.4V DC
OFF judgment: 0 to 5V DC
(5) Input read cycle (min. pulse width): 200ms
(6) Insulation:
Functional insulation with internal circuit
(7) Option:
NOT/AND/OR logic operation, Latch action
3. Digital Output
(1) No. of output: 8 points (4 points/common × 2 blocks)
(2) Output type: Select from a) and b) according to model
type specification
a) Relay contact output
- Contact structure: SPST contact
- Contact capacity: 220V AC / 30V DC, 1A
- Insulation:
Functional insulation with internal circuit
b) Transisitor open collector (sink) output
- Rating:
24V DC, 100mA
(Residual voltage when power
is ON: 1.5V DC or less)
- Insulation:
Functional insulation with internal circuit
(3) Option:
Control output/Event output selection,
NOT/AND/OR logic operation, Latch action
(7) No. of connectable units:
33 units (master and slave)
(32 units if any modules other than PUM
series are included in slaves.)
(8) Data format: Data bit; 8, parity; even / odd / none
(9) Protocol:
Modbus RTU compatible
(10) Insulation: No insulation with loader communication
port
Functional insulation with any other input / output
4.2 Loader communication (RS-232C) interface
(1) Communication standards: RS-232C compatible
(2) No. of port: 1 port
(3) Communication, synchro method:
Half-duplex, asynchronous cycle
(4) Communication speed: 19.2kbps (fixed)
(5) Data format: Data bit 8, no parity
(6) Protocol:
Modbus RTU compatible
(7) Connection method:
2.5 diameter mini-plug / jack
[on the front of the module]
(Common cable with PXG, PXH)
(8) Insulation:
No insulation with RS-485
Functional insulation with any other input / output
5. Display, configuration
5.1 Display
(1) Display:
Status display LED
(2 colors × 2 points + 16 points)
(2) Display contents:
RUN/FAULT, RS-485 TX/RX, Input × 8
points, output × 8 points
5.2 Setting device
(1) Setting device: Rotary SW × 1
[on the front of the module]
(2) Set contents: RS-485 Station No.
(Station No.= setting value + 17)
6. Power outage
(1) Impact of power outage:
Outage of 2ms or less ; no impact
(2) Operation after power outage:
Start from the first step (cold start)
(3) Memory backup:
Nonvolatile memory (EEPROM)
No. of update ; 100,000
7. Self diagnosis
4. Communication function
4.1 RS-485 interface
(1) Communication standards: RS-485 compatible
(2) No. of port: 1 port
(3) Communication, synchro method:
Two-wire, half-duplex, asynchronous
cycle
(4) Communication speed: 9.6k, 19.2k, 38.4k, 115.2kbps
(5) Communication distance: 1km (38.4kbps or less),
250m (115.2kbps)
(6) Recommended cable: KPEV-SB 0.5sq-equivalent
2
Diagnosis method:
Program error monitoring by watch dog
timer
8. Structure
(1) Installation method:
DIN rail mounting or mounting with M3
screws inside a cabinet
(2) Dimensions: 30 (W) × 100 (H) × 85 (D) mm
(excluding terminal cover and projected
part)
(3) Weight:
Approx. 200 g
(4) Extrenal terminal
- Digital input / digital output:
Detachable terminal block
(M3 screw × 20 terminals)
- Power supply connection:
Terminal block on the base part
(M3 screw × 2 terminals)
Power is supplied via side connectors
in case of lateral connecting. (Max. 33
units)
- RS-485 communication connection:
Terminal block on the base part
(M3 screw × 3 terminals)
RS-485 communication is connected via
side connectors in case of lateral connecting.
- Loader communication port:
2.5 diameter mini-plug / jack
[on the front of the module]
(5) Case material: Polyphenylene oxide
(flame retardant grade : UL94V-0 equivalent)
(6) Case color: Case ; red
Terminal, base part ; black
(7) Protection
- Body:
IP20 grade protection
(ventilation slits on the top and the bottom of the body)
- Terminal:
IP00 grade protection, terminal cover is
available as an option
9. Normal operating condition
10. Transporting, storage condition (packing condition)
(1) Storage temperature: -20 to 60°C
(2) Ambient humidity: 90%RH or less (no condensing)
(3) Vibration:
10 to 70Hz, 9.8m/s2 (1G) or less
(4) Shock:
294m/s2 (30G) or less
11. Packing list
Temperature controller: 1unit
Instruction manual:
1 copy
12. Loader software
(1) Distribution medium:
Free download from Fuji Electric Systems HP (http://www.fic-net.jp/eng/index.
html)
(2) Recommended operating environment
PC:
DOS/V (PC-AT compatible)
OS:
Windows XP (operation confirmed in
Japanese / English)
RAM:
256M bytes or more
Free space on the hardware: 500M bytes or more
Display resolution: 1024 × 768 or over
Serial interface: RS-232C 1 port
(without RS-232C, USB serial converter
cable required)
(3) Connection with PUM
Via loader interface on the front face of the module
(special cable available from Fuji is required) or via
RS-485
(1) Ambient temperature*: -10 to 50°C
* “Ambient temperature” is the temperature underneath the controller inside
the equpiment or the cabinet where
the controller is installed.
(2) Ambient humidity:
90% RH or less (non condensing)
(3) Vibration:
10 to 70Hz, 9.8m/s2 (1G) or less
3
PUME
CODE SYMBOLS
[Event input/ouput module]
Digit
Description
4 < Module type >
Event input/output module [Di 8 points / Do 8 points]
5 < Output type >
Transisitor open collector (sink) output
Relay contact output
10 <Operation manual >
Japanese
English
1 2 3 4 5 6 7 8
9 10
P UM
0
YY1
E
C
R
A
B
1 2 3 4 5 6 7 8
P UM Z *
[Accessories]
Digit
Description
6 RS-485 terminating resistance
7 DIN rail mounting end plate
8 Side conneting terminal cover (right & left 1 set)
Front face screw terminal cover
Loader connecting cable (RS-232C)
[Table 1] Insulation block diagram
Power
Di1 to 4
Loader communication port
Di5 to 8
RS-485 communication port
Do1 to 4
Do5 to 8
Functional insulation (1000V AC)
Functional insulation (500V AC)
4
A
A
A
A
L
0
0
0
0
0
1
2
3
4
1
Digit
Digit
OUTLINE DIAGRAM (Unit : mm)
Front terminal cover (Option)
(10)
Base part
(Main unit is detached)
Terminal block
(at attach/detach)
30
85
Hole for screw mounting
LOADER
1.5
50
STATION
100
6
DIN rail
6.1
Terminal screw
M3
5
Terminal
screw M3
(8)
(30)
Hole for screw
mounting
Main unit (at attach/detach)
At mounting to the DIN rail
Dimensions for screw mounting
(30)
9±0.2
Notice at the installation
Please keep the distance of 30mm from this instrument to radiate.
[50mm is recommended]
30 or more
88.5±0.2
(3)
(100)
30 or more
2-M3
Locking tab
30 +0.7
+0.2
5
PUME
TERMINAL CONNECTION DIAGRAM
Loader interface plug (RS-232C)
3 TX
2 RX
1 GND
φ2.5 3-pole miniature plug
LOADER
STATION
Di4
Di3
Di2
Di1
21
22
21
Digital input
1 to 4
23
Transistor
O.C. (SINK)
11
22
12
Digital output
1 to 4
13
23
24
14
24
25
24V DC
Di8
Di7
Di6
Di5
26
27
28
Digital input
5 to 8
25
15
26
16
17
27
28
Transistor
O.C. (SINK)
Digital output
5 to 8
13
L
14
Do3
L
15
Do4
17
Do5
Do6
19
19
Do7
L
20
1
2
+
-
24V DC
5
Communication
RS485
3
4
5
SG
Do2
Do3
Do4
Relay
COM
Do8
COM
Do1
Do2
18
A(+) B(-)
6
L
L
2
4
Do1
L
Power
3
12
L
Base part
1
L
18
20
30
COM
16
30
24V DC
11
24V DC
29
29
Relay
24V DC
COM
Do5
Do6
Do7
Do8
11
12
13
14
15
16
17
18
19
20
Operation parameter
Parameter (name)
Run/Standby switch
Digital input latch releases command
Digital output latch releases
command
0:
1:
0:
1:
0:
1:
Read/write date setting range
Run
Standby
OFF
Release latch
OFF
Release latch
Factory default
0 (RUN)
Registor No.
40021
0 (OFF)
40022
0 (OFF)
40023
Factory default
0 (NONE)
Registor No.
40111
1
1 (R/W)
40113
40114
1 (9.6kbps)
40115
0
40116
Factory default
0 (HOLD)
Registor No.
40260
0000
0
40268
40270
1
40222
Communication parameter
Parameter (name)
RS-485 Parity setting
RS-485 Response interval time
RS-485 Communication permission
RS-485 Communication speed
Enhanced communication module
(PUMC) connection
Read/write date setting range
0: NONE
1: ODD
2: EVEN
0 to 25 (×20ms)
0: Read only
1: Read/Write
0: 9.6kbps
1: 19.2kbps
2: 38.4kbps
3: Forbidden
4: 115.2kbps
0: PUMC not connected (RS485 Enable)
1: PUMC connected (RS485 Disable)
Configuration parameter
Parameter (name)
FAULT output set value
Standby output set value
Standby mode setting
LED2 Lamp Allocation
Read/write date setting range
0: HOLD
1: OFF
0000 to FFFF
0: DI=Input value, DO=Standby output set value
1: DI=All OFF, DO=Standby output set value
0 to 2
7
PUME
DI parameter
Parameter (name)
DI1 Input option
DI1
DI1
DI2
DI2
DI2
DI3
DI3
DI3
DI4
DI4
DI4
DI5
DI5
DI5
DI6
DI6
DI6
DI7
DI7
DI7
DI8
DI8
DI8
8
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
Input
logic operation
logic operation
option
logic operation
logic operation
option
logic operation
logic operation
option
logic operation
logic operation
option
logic operation
logic operation
option
logic operation
logic operation
option
logic operation
logic operation
option
logic operation
logic operation
AND
OR
AND
OR
AND
OR
AND
OR
AND
OR
AND
OR
AND
OR
AND
OR
Read/write date setting range
0 to 15 (bit data : 0000 to 1111)
bit0 : LATCH
bit1 : NOT
bit2 : AND
bit3 : OR
0000 to 00FF
0000 to 00FF
0 to 15 (bit data : 0000 to 1111)
0000 to 00FF
0000 to 00FF
0 to 15 (bit data : 0000 to 1111)
0000 to 00FF
0000 to 00FF
0 to 15 (bit data : 0000 to 1111)
0000 to 00FF
0000 to 00FF
0 to 15 (bit data : 0000 to 1111)
0000 to 00FF
0000 to 00FF
0 to 15 (bit data : 0000 to 1111)
0000 to 00FF
0000 to 00FF
0 to 15 (bit data : 0000 to 1111)
0000 to 00FF
0000 to 00FF
0 to 15 (bit data : 0000 to 1111)
0000 to 00FF
0000 to 00FF
Factory default Registor No.
0 (bit data 0000) 40701
0000
0000
0 (bit
0000
0000
0 (bit
0000
0000
0 (bit
0000
0000
0 (bit
0000
0000
0 (bit
0000
0000
0 (bit
0000
0000
0 (bit
0000
0000
data 0000)
data 0000)
data 0000)
data 0000)
data 0000)
data 0000)
data 0000)
40703
40704
40705
40707
40708
40709
40711
40712
40713
40715
40716
40717
40719
40720
40721
40723
40724
40725
40727
40728
40729
40731
40732
DO parameter
Parameter (name)
DO1 Output type
DO1
DO1
DO1
DO1
Master module St. No.
Master module Ch. No.
BIT position
Output option
DO1
DO1
DO1
DO1
DO1
DO1
DO1
DO1
DO2
Output logic operation AND
Output logic operation OR
Scaling base
Scaling span
Proportion cycle
Lower limits
Upper limits
Limit type
Output type
DO2
DO2
DO2
DO2
DO2
DO2
DO2
DO2
DO2
DO2
DO2
DO2
DO3
Master module St. No.
Master module Ch. No.
BIT position
Output option
Output logic operation AND
Output logic operation OR
Scaling base
Scaling span
Proportion cycle
Lower limits
Upper limits
Limit type
Output type
DO3
DO3
DO3
DO3
DO3
DO3
DO3
DO3
DO3
DO3
DO3
DO3
DO4
Master module St. No.
Master module Ch. No.
BIT position
Output option
Output logic operation AND
Output logic operation OR
Scaling base
Scaling span
Proportion cycle
Lower limits
Upper limits
Limit type
Output type
DO4
DO4
DO4
DO4
DO4
DO4
DO4
DO4
DO4
DO4
DO4
DO4
Master module St. No.
Master module Ch. No.
BIT position
Output option
Output logic operation AND
Output logic operation OR
Scaling base
Scaling span
Proportion cycle
Lower limits
Upper limits
Limit type
Read/write date setting range
0: Event output
1: Control output
0 to 255
1 to 4
0000 to 00FF
0 to 15 (bit data : 0000 to 1111)
bit0 : LATCH
bit1 : NOT
bit2 : AND
bit3 : OR
0000 to 00FF
0000 to 00FF
-100.0 to 100.0%
-100.0 to 100.0%
1 to 120 sec.
0.0 to 100.0%
0.0 to 100.0%
0 to 3
0: Event output
1: Control output
0 to 255
1 to 4
0000 to 00FF
0 to 15 (bit data : 0000 to 1111)
0000 to 00FF
0000 to 00FF
-100.0 to 100.0%
-100.0 to 100.0%
1 to 120 sec.
0.0 to 100.0%
0.0 to 100.0%
0 to 3
0: Event output
1: Control output
0 to 255
1 to 4
0000 to 00FF
0 to 15 (bit data : 0000 to 1111)
0000 to 00FF
0000 to 00FF
-100.0 to 100.0%
-100.0 to 100.0%
1 to 120 sec.
0.0 to 100.0%
0.0 to 100.0%
0 to 3
0: Event output
1: Control output
0 to 255
1 to 4
0000 to 00FF
0 to 15 (bit data : 0000 to 1111)
0000 to 00FF
0000 to 00FF
-100.0 to 100.0%
-100.0 to 100.0%
1 to 120 sec.
0.0 to 100.0%
0.0 to 100.0%
0 to 3
Factory default Registor No.
0 (Event output) 40401
0
1
0001
0 (bit data 0000)
40402
40403
40404
40405
0000
0000
0.0
100.0
30
0.0
100.0
0
0 (Event output)
40407
40408
40409
40410
40411
40412
40413
40414
40415
0
1
0002
0 (bit data 0000)
0000
0000
0.0
100.0
30
0
100.0
0
0 (Event output)
40416
40417
40418
40419
40421
40422
40423
40424
40425
40426
40427
40428
40429
0
1
0004
0 (bit data 0000)
0000
0000
0.0
100.0
30
0.0
100.0
0
0 (Event output)
40430
40431
40432
40433
40435
40436
40437
40438
40439
40440
40441
40442
40443
0
40444
1
40445
0008
40446
0 (bit data 0000) 40447
0000
40449
0000
40450
0.0
40451
100.0
40452
30
40453
0.0
40454
100.0
40455
0
40456
9
PUME
DO parameter
Parameter (name)
DO5 Output type
10
DO5
DO5
DO5
DO5
DO5
DO5
DO5
DO5
DO5
DO5
DO5
DO5
DO6
Master module St. No.
Master module Ch. No.
BIT position
Output option
Output logic operation AND
Output logic operation OR
Scaling base
Scaling span
Proportion cycle
Lower limits
Upper limits
Limit type
Output type
DO6
DO6
DO6
DO6
DO6
DO6
DO6
DO6
DO6
DO6
DO6
DO6
DO7
Master module St. No.
Master module Ch. No.
BIT position
Output option
Output logic operation AND
Output logic operation OR
Scaling base
Scaling span
Proportion cycle
Lower limits
Upper limits
Limit type
Output type
DO7
DO7
DO7
DO7
DO7
DO7
DO7
DO7
DO7
DO7
DO7
DO7
DO8
Master module St. No.
Master module Ch. No.
BIT position
Output option
Output logic operation AND
Output logic operation OR
Scaling base
Scaling span
Proportion cycle
Lower limits
Upper limits
Limit type
Output type
DO8
DO8
DO8
DO8
DO8
DO8
DO8
DO8
DO8
DO8
DO8
DO8
Master module St. No.
Master module Ch. No.
BIT position
Output option
Output logic operation AND
Output logic operation OR
Scaling base
Scaling span
Proportion cycle
Lower limits
Upper limits
Limit type
Read/write date setting range
0: Event output
1: Control output
0 to 255
1 to 4
0000 to 00FF
0 to 15 (bit data : 0000 to 1111)
0000 to 00FF
0000 to 00FF
-100.0 to 100.0%
-100.0 to 100.0%
1 to 120 sec.
0.0 to 100.0%
0.0 to 100.0%
0 to 3
0: Event output
1: Control output
0 to 255
1 to 4
0000 to 00FF
0 to 15 (bit data : 0000 to 1111)
0000 to 00FF
0000 to 00FF
-100.0 to 100.0%
-100.0 to 100.0%
1 to 120 sec.
0.0 to 100.0%
0.0 to 100.0%
0 to 3
0: Event output
1: Control output
0 to 255
1 to 4
0000 to 00FF
0 to 15 (bit data : 0000 to 1111)
0000 to 00FF
0000 to 00FF
-100.0 to 100.0%
-100.0 to 100.0%
1 to 120 sec.
0.0 to 100.0%
0.0 to 100.0%
0 to 3
0: Event output
1: Control output
0 to 255
1 to 4
0000 to 00FF
0 to 15 (bit data : 0000 to 1111)
0000 to 00FF
0000 to 00FF
-100.0 to 100.0%
-100.0 to 100.0%
1 to 120 sec.
0.0 to 100.0%
0.0 to 100.0%
0 to 3
Factory default Registor No.
0 (Event output) 40457
0
1
0010
0 (bit data 0000)
0000
0000
0.0
100.0
30
0.0
100.0
0
0 (Event output)
40458
40459
40460
40461
40463
40464
40465
40466
40467
40468
40469
40470
40471
0
1
0000
0 (bit data 0000)
0000
0000
0.0
100.0
30
0.0
100.0
0
0 (Event output)
40472
40473
40474
40475
40477
40478
40479
40480
40481
40482
40483
40484
40485
0
1
0000
0 (bit data 0000)
0000
0000
0.0
100.0
30
0.0
100.0
0
0 (Event output)
40486
40487
40488
40489
40491
40492
40493
40494
40495
40496
40497
40498
40499
0
40500
1
40501
0000
40502
0 (bit data 0000) 40503
0000
40505
0000
40506
0.0
40507
100.0
40508
30
40509
0.0
40510
100.0
40511
0
40512
Internal DO data area parameter
Internal
Internal
Internal
Internal
Internal
Internal
Internal
Internal
Internal
Internal
Internal
Internal
Internal
Internal
Internal
Internal
Parameter (name)
DO data area 1
DO data area 2
DO data area 3
DO data area 4
DO data area 5
DO data area 6
DO data area 7
DO data area 8
DO data area 9
DO data area 10
DO data area 11
DO data area 12
DO data area 13
DO data area 14
DO data area 15
DO data area 16
Read/write date setting range
Event output
1: ON
0: OFF
Control output
0.00 to 100.00
Factory default
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Registor No.
41001
41002
41003
41004
41005
41006
41007
41008
41009
41010
41011
41012
41013
41014
41015
41016
Factory default
Registor No.
30064
31002
31001
31003
Monitor parameter
Parameter (name)
System FAULT status
DO calculated result monitor
DI calculated result monitor
DI terminal monitor
0000
0000
0000
0000
to
to
to
to
Read/write date setting range
FFFF
FFFF
FFFF
FFFF
-
11
PUME
Caution on Safety
*Before using this product, be sure to read its instruction manual in advance.
International Sales Div
Sales Group
Gate City Ohsaki, East Tower, 11-2, Osaki 1-chome,
Shinagawa-ku, Tokyo 141-0032, Japan
http://www.fujielectric.com
Phone: 81-3-5435-7280, 7281 Fax: 81-3-5435-7425
http://www.fjielectric.com/products/instruments/
Information in this catalog is subject to change without notice.
Printed in Japan
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement