M-SYSTEM KV Signal Transmitter INSTRUCTION MANUAL

Below you will find brief information for Signal Transmitter KV. This document describes proper installation and connection procedures, as well as basic maintenance techniques. It also presents crucial safety precautions to be taken when using this unit. By following the instructions provided, you can ensure optimal performance and longevity of your KV Signal Transmitter.

PDF Download
Document
Signal Transmitter KV Instruction Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • DIN Rail mounting
  • Wall mounting
  • Input resistor
  • Zero adjustment
  • Span adjustment
  • Output signal calibration
  • Environmental temperature range
  • Humidity tolerance
  • Power supply connection
  • Input signal connection

Frequently asked questions

The Input Resistor is typically used with current input types. It helps ensure proper signal conversion for accurate readings.

You need to use a signal source and measuring instruments of sufficient accuracy. Apply 0% input and adjust the output to 0% (ZERO). Then, apply 100% input and adjust the output to 100% (SPAN). Finally, check the ZERO adjustment again with 0% input.

The unit should be installed in environments with temperatures between -5°C and +55°C, and humidity levels between 30% and 90% RH. Avoid dusty or vibrating environments.
Preparing document for printing…
0%