Kyocera FS 9100DN, FS 9500DN laser printer Operation Guide

Below you will find brief information for laser printer FS-9100DN, laser printer FS-9500DN. The Kyocera Mita page printer has many desirable features, such as EcoPrint function that reduces the power consumption and Auto Media Type Selection function that selects automatically media before print. If you install the option document finisher to the printer, you can also make stitching.

PDF Download
Document
Kyocera FS-9100DN, FS-9500DN Operation Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • EcoPrint function
  • Auto Media Type Selection function
  • stitching
  • parallel interface
  • serial interface
  • network interface
  • optional hard disk unit
  • optional document finisher
  • optional network interface card

Frequently asked questions

Pull the paper cassette out toward you as far as it will go. Do not pull more than one paper cassette out at a time. Hold the paper guide and move it to align the paper guide with the required paper width. Paper sizes are marked inside the paper cassette. Hold the paper stopper and move it to align with the required paper length. Set the paper flush against the left-hand wall of the paper cassette. Gently push the paper cassette back in.

Open the MP tray. Adjust the insert guides to the size of the paper to be loaded. Set the supplied paper size plate so that the size of the paper loaded can be checked by looking at the front of the paper cassette. Insert the paper along the guides as far as it will go.

The printer has a parallel interface, a serial interface, a network interface, and an optional network interface card.

You can replace the toner container, clean the internal parts of the printer, and replace the waste toner box.

The printer can use standard paper, transparencies, adhesive-backed labels, and other special paper.
Preparing document for printing…
0%