Eaglesoft ScanX Scanner, Accent Sensor, Sigma Sensor, Orthopantomograph Panoramic, Dixi3 Sensor, VisionDX Sensor, iPan, PanX Panoramic, PanX-C Pan/Ceph, Sensor (USB), Wireless Sensor, CDR Pan Elite, CDR Sensor Elite Installation Instructions
Below you will find brief information for digital integration ScanX Scanner, digital integration Accent Sensor, digital integration Sigma Sensor, digital integration Orthopantomograph Panoramic, digital integration Proline Panoramic. These devices are designed to integrate seamlessly with Eaglesoft, allowing you to capture and manage patient images directly within your practice management software. This provides a streamlined workflow for capturing and sharing images, allowing you to focus on patient care. This guide will provide you with step-by-step instructions for installing the digital integration on your computer.
Advertisement
Advertisement
Version 16
Eaglesoft Digital Integration
Attention Schick Pan
Users:
After upgrading to
Eaglesoft 16, please reinstall your Schick
Pan integration.
Air Techniques
ScanX Scanner
Accent Sensor
Instrumentarium
Sigma Sensor
Orthopantomograph Panoramic
PLANMECA
Proline and ProMax Panoramic
Dixi3 Sensor
Progeny
VisionDX Sensor
Schick
iPan
PanX Panoramic
PanX-C Pan/Ceph
Sensor (USB)
Wireless Sensor
CDR Pan Elite
CDR Sensor Elite
Sirona
Sidexis Sensor
Orthophos XG or XG+ Panoramic
Soredex
Digora Optime
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
ScanX Scanner Integration
1. Please review all installation instructions before beginning the installation. You should have a compact disc labeled Eaglesoft Digital Integration.
2. Close all running programs.
3. Make a backup (same as daily backup).
4. Log on as the Administrator.
5. Insert the compact disc into your CD-ROM drive. The following installation window should automatically appear. If not, click Start and choose Run. Type D:\essetup.exe in the Open field (if the CD-ROM drive on your computer is represented by a letter other than D, substitute the appropriate letter) and click OK.
Important: Install this integration only on the machine from which you will be using ScanX.
6. Under Air Techniques, click ScanX.
7. Click Next.
2 ••••
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
Eaglesoft Digital Integration
8. Click Yes.
9. Click Install.
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
10. Click Finish.
After the installation has finished, you will need to install the three ILE drivers: Air Techniques ScanX
Standard (Loading 1), Air Techniques ScanX
Standard (Loading 2) and Air Techniques ScanX.
11. Please insert your ScanX ILE Drivers CD into your CD-ROM. Click Install the ScanX
Drivers and Utilities.
12. Click Next.
13. Select Typical. Click Next.
14. Click Finish.
After installing the integration, plug the device into your computer. The Detect New Hardware window will appear. Follow the prompts or call Patterson Support for assistance.
4 ••••
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
Eaglesoft Digital Integration
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
15. Select No, not this time. Click Next.
16. Select Install from a list or specific
location (Advanced). Click Next.
17. Select Search for the best driver in these
locations. Select the checkboxes Search
removable media floppy, CD-ROM…) and
Include this location in the search.
Browse to C:\\Program
Files\Eaglesoft\Shared Files.
18. Select Shared Files. Select OK.
19. Select Next.
20. Select Finish.
Repeat steps 15-20 until all three drivers have been installed.
6 ••••
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
Eaglesoft Digital Integration
Accent Sensor
1. Please review all installation instructions before beginning the installation. You should have a compact disc labeled Eaglesoft Digital Integration.
2. Close all running programs.
3. Make a backup (same as daily backup).
4. Log on as the Administrator.
5. Insert the compact disc into your CD-ROM drive. The following installation window should automatically appear. If not, click Start and choose Run. Type D:\essetup.exe in the Open field (If the CD-ROM drive on your computer is represented by a letter other than D, substitute the appropriate letter) and click OK.
Important: Install this integration only on the machine from which you will be using Accent.
6. Under Air Techniques, click Accent Sensor.
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
7. Click Next.
8. Click Install.
9. Click Yes.
10. Select Finish.
After installing the integration, plug the device into your computer. The Detect New Hardware window will appear. Follow the prompts or call Patterson Support for assistance.
Place the Accent Sensor CD in your CD-ROM drive.
8 ••••
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
Eaglesoft Digital Integration
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
11. Select No, not this time. Click Next.
12. Select Install from a list or specific location
(Advanced). Select Next.
13. Select Search for the best driver in these
locations. Select the checkboxes Search
removable media (floppy, CD-ROM…) and
Include this location in the search:. Select
Browse and locate D:\Accent\Drivers\Device
Drivers. Select Next.
14. Select Finish.
10 ••••
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
Eaglesoft Digital Integration
Progeny VisionDX Sensor
1. Please review all installation instructions before beginning the installation. You should have a compact disc labeled Eaglesoft Digital Integration.
2. Close all running programs.
3. Make a backup (same as daily backup).
4. Log on as the Administrator.
5. Insert the compact disc into your CD-ROM drive. The following installation window should automatically appear. If not, click Start and choose Run. Type D:\essetup.exe in the Open field (If the CD-ROM drive on your computer is represented by a letter other than D, substitute the appropriate letter) and click OK.
Important: Install this integration only on the machine from which you will be using Progeny.
6. Under Progeny, click VisionDX.
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
7. Click Next.
8. Click Install.
9. Click Yes.
10. Select Finish.
After installing the integration, plug the device into your computer. The Detect New Hardware window will appear. Follow the prompts or call Patterson Support for assistance.
Place the VisionDX Sensor CD in your CD-ROM drive.
12 ••••
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
Eaglesoft Digital Integration
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
11. Select No, not this time. Click Next.
12. Select Install from a list or specific location
(Advanced). Select Next.
13. Select Search for the best driver in these
locations. Select the checkboxes Search
removable media (floppy, CD-ROM…) and
Include this location in the search:. Select
Browse and locate D:\Accent\Drivers\Device
Drivers. Select Next.
14. Select Finish.
Instrumentarium Integration (All Devices)
1. Please review all installation instructions before beginning the installation. You should have a compact disc labeled Eaglesoft Digital Integration.
2. Close all running programs.
3. Make a backup (same as daily backup).
4. Log on as the Administrator.
5. Insert the compact disc into your CD-ROM drive. The following installation window should automatically appear. If not, click Start and choose Run. Type D:\pi.exe in the Open field (if the CD-
ROM drive on your computer is represented by a letter other than D, substitute the appropriate letter) and click OK.
Important: Install this integration only on the machine from which you will be using
Instrumentarium.
14 ••••
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
6. Under Instrumentarium Imaging, select I/O-
Panoramic.
Eaglesoft Digital Integration
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
7. Click Next.
SENSOR USERS ONLY
Select the checkbox Sigma Sensor. Select the
Browse button to the correct location of the Gain
Files for the sensor.
8. Click Next.
PANORAMIC USERS ONLY
Select the checkbox Orthopantomograph
Panoramic. Select the Browse button to the correct location of the Gain Files for the panoramic unit.
8. Click Next.
SENSOR USERS ONLY
9. Click Yes.
PANORAMIC USERS ONLY
9. Click Yes.
10. Click Install.
11. Click Finish.
After installing the integration, plug the device into your computer. The Detect New Hardware window will appear. Follow the prompts or call Patterson Support for assistance.
12. Select No, not this time. Select Next.
16 ••••
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
Eaglesoft Digital Integration
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
13. Select Continue Anyway.
14. Select Search for the best driver in these
locations. Select the checkboxes Search
removable media (floppy, CD-ROM…) and
Include this location in the search:. Select
Browse and locate C:\Program
Files\Eaglesoft\Shared Files. Select Next.
15. Select Install from a list or specific location
(Advanced). Select Next.
16. Select Finish.
18 ••••
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
Eaglesoft Digital Integration
PLANMECA Panoramic and Sensor
1. Please review all installation instructions before beginning the installation. You should have a compact disc labeled Eaglesoft Digital Integration.
2. Close all running programs.
3. Make a backup (same as daily backup).
4. Log on as the Administrator.
5. Insert the compact disc into your CD-ROM drive. The following installation window should automatically appear. If not, click Start and choose Run. Type D:\pi.exe in the Open field (If the CD-
ROM drive on your computer is represented by a letter other than D, substitute the appropriate letter) and click OK.
Important: Install this integration only on the machine from which you will be using PLANMECA.
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
6. Under the PLANMECA Heading, choose I/O-
Panoramic.
7. Click Next.
8. Insert the disk labeled Calibration, then click
Next.
9. If you do not have any other calibration disks, click No to continue.
10. Click Yes.
11. Click Finish.
20 ••••
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
Eaglesoft Digital Integration
12. Click Next.
13. Click Next.
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
14. Click Next.
15. Click Finish.
16. Select from the available radio button options and click OK.
After installing the integration, insert USB sensors into your computer. The Detect New Hardware window will appear. Follow the prompts or call Patterson Support for assistance.
PLANMECA Sensor Additional Hardware
17. Select No, not this time. Select Next.
22 ••••
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
Eaglesoft Digital Integration
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
18. Select Install the software automatically
(Recommended). Select Next.
19. Select Finish.
Schick Installation
1. Please review all installation instructions before beginning the installation. You should have a compact disc labeled Eaglesoft Digital Integration.
2. Close all running programs.
3. Make a backup (same as daily backup).
4. Log on as the Administrator.
5. Insert the compact disc into your CD-ROM drive. The following installation window should automatically appear. If not, click Start and choose Run. Type D:\essetup.exe in the Open field (if the CD-ROM drive on your computer is represented by a letter other than D, substitute the appropriate letter) and click OK.
Important: Install this integration only on the machine from which you will be using Schick.
6. Under Schick, select I/O-Panoramic.
7. Ensure your device is unplugged and click
OK.
24 ••••
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
8. Click Next.
Eaglesoft Digital Integration
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
9. Select the checkbox of the appropriate option.
(Multiple selections can be made and installed at this time.) Click Next.
10. Click Install.
SCHICK SENSOR USERS ONLY
Skip ahead to step #20
11. Click Yes.
SCHICK PANORAMIC/CEPH USERS ONLY
Skip ahead to step #20
12. Click Yes.
13. Click Finish.
SCHICK WIRELESS USERS ONLY
Skip ahead to step #20.
14. Select Yes. Select No for all other devices.
SCHICK ELITE USERS ONLY
Continue through step #19.
15. Select OK.
26 ••••
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
16. Select OK.
SCHICK PAN ELITE ONLY
Sensor Elite users, proceed to step #18
17. Select the desired device. Select Next.
Eaglesoft Digital Integration
18. Select Install.
19. Select Finish.
After installing the integration, plug the device into your computer. The Detect New Hardware window will appear. Follow the prompts or call Patterson Support for assistance.
Schick Remote HS Hardware Installation
20. Insert the Remote HS drivers CD. Select Next.
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
21. Select Install.
22. Select Finish
The driver is Microsoft Certified, so when the remote is plugged in, the driver will be auto-installed.
Schick USB Sensor Hardware Installation
20. Select No, not this time. Select Next.
28 ••••
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
Eaglesoft Digital Integration
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
21. Select Install the software automatically
(Recommended). Select Next.
22. Select Finish.
23. Select No.
Schick Wireless and SDX Hardware Installation
20. Select No, not this time. Select Next.
21. Select Install from automatically
(Recommended). Select Next.
22. Select Finish.
30 ••••
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
Eaglesoft Digital Integration
23. Select Yes.
Schick Panoramic Hardware Installation
20. Select No, not this time. Select Next.
21. Select Install the software automatically
(Recommended). Select Next.
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
22. Select Finish.
Sirona Integration (All Devices)
NOTE: Sirona's Sidexis software MUST be installed and configured prior to installing Eaglesoft
Sirona Digital Integration. Contact Sirona for more information.
1. Please review all installation instructions before beginning the installation. You should have a compact disc labeled Eaglesoft Digital Integration.
2. Close all running programs.
3. Make a backup (same as daily backup).
4. Log on as the Administrator.
5. Insert the compact disc into your CD-ROM drive. The following installation window should automatically appear. If not, click Start and choose Run. Type D:\pi.exe in the Open field (if the CD-
ROM drive on your computer is represented by a letter other than D, substitute the appropriate letter) and click OK.
Important: Install this integration only on the machine from which you will be using Sirona.
6. Under Sirona, select I/O - Panoramic.
Eaglesoft Digital Integration
32 ••••
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
7. Click Next.
PANORAMIC USERS ONLY
8. Click Yes. Note: This installation installs both
Panoramic and Sensor integration.
SENSOR USERS ONLY
8. Click Yes.
9. Click Finish.
After installing the integration, plug the device into your computer. The Detect New Hardware window will appear. Follow the prompts or call Patterson Support for assistance.
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
Soredex Optime Digital Integration
1. Please review all installation instructions before beginning the installation. You should have a compact disc labeled Eaglesoft Digital Integration.
2. Close all running programs.
3. Make a backup (same as daily backup).
4. Insert the compact disc into your CD-ROM drive. The following installation window should automatically appear. If not, click Start and choose Run. Type D:\pi.exe in the Open field (if the CD-
ROM drive on your computer is represented by a letter other than D, substitute the appropriate letter) and click OK.
Important: Install this integration only on the machine from which you will be using Optime.
5. Under Soredex, select I/O - Panoramic.
6. Click Next.
34 ••••
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
Eaglesoft Digital Integration
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
7. Click Yes.
8. Click Install.
9. Click Finish.
After completing the digital installation, log on to
Eaglesoft.
Select File | Preference | X-ray. In the X-ray tab, select the Digora Optime button under Device
Properties.
In the Settings tab under Scanner Connection, select from the following options:
Direct Connection – Select this radio button if the
Optime scanner is directly connected to this computer.
Enter the Scanner serial number and select the
Computer network connection from the dropdown list.
IP based – Select this radio button if the scanner is being accessed over a network. Select the checkbox
Enable changing IP address. Enter the IP address and select Send to Scanner.
Multi-Connect – Select the checkbox Use Multi-
Connect to allow multiple computers on the network to access the scanner. Enter the Workstation identifier.
Enter a value for the Scanner Autorelease timeout,
seconds.
Select OK on the X-ray tab to save your preferences.
Please review Eaglesoft Hardware Requirements prior to adding new hardware to your system.
36 ••••
Printed copies of this document are considered uncontrolled.
14381.4.Rev001 02.03.2014
Eaglesoft Digital Integration

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- Seamless integration with Eaglesoft
- Capture and manage patient images
- Streamlined workflow for image capture and sharing
- Direct connection to computer
- Network access capabilities
- Multi-Connect capabilities