User manual | LSRLMCSU Series All Metal “Sortie” Sign TYPICAL SPECIFICATIONS FEATURES

Project/Location:
Contractor:
Date:
LSRLMCSU Series
Prepared by:
All Metal “Sortie” Sign
FEATURES
Lumacell Model:
TYPICAL SPECIFICATIONS
•Two-wires universal AC input
•Long-life, energy-efficient ALINGAP technology LED light source
•Based on a modular design concept, this Exit Sign comes preassembled for quick, easy installation
•Metal construction using Canadian cold-rolled steel
•Supplied standard with two metal stencil plates, red diffusing lesnses
and backplate
•Universal mounting – end, wall or ceiling
•Easy access to wiring entry for all mounting options
•Canopy mounting system designed specifically for ease of installation
•Universal, field-selectable chevrons (knockout)
•Energy efficient – consumes less than 3W in AC or DC mode
•Normal AC and emergency DC operation – 120 to 347VAC input; 6 to
24VDC input
•Also available with power pack; see LM*CS catalogue sheet
•CSA certified, meets or exceeds C860 requirements
Supply and install the Lumacell® LSRLMCSU Series LED “SORTIE’’ Exit
Signs. The equipment shall operate with universal two-wire AC input voltage
of 120VAC to 347VAC at less than 1.5W and universal two-wire DC input
voltage from 6VDC to 24VDC at less than 1.5W for single or double face
signs.
The sign shall be suitable for wall, end or ceiling mount. The faceplates shall
be constructed of steel and shall come standard with knockout chevrons. The
frame shall be of a one-piece steel construction.
The light source shall be light emitting diodes (LED). The LED lamps shall
provide illumination in normal and emergency operation and shall be mounted
inside the exit housing, not on the face.
Red LED technology shall be ALINGAP. An LED-sensitive diffuser shall be
mounted behind the legend to provide the 6” (15cm) high by 3/4” (1.9cm)
stroke letters with even illumination.
The Exit Sign in a Self-Powered configuration shall stay illuminated during
emergency operation for at least 60 minutes upon AC failure.
The Exit Sign shall be CSA-C860 approved.
.
The equipment shall be Lumacell® Model:
DIMENSIONS
Dimensions are approximate and subject to change.
71/2” [19.1 cm]
71/2” [19.1 cm]
83/4” [22.3 cm]
45/8” [11.7 cm]
18” [45.7 cm]
WIRE GUARDS
21/8” [5.3 cm]
191/8” [48.5 cm]
460.0057-L
Wall Mount
460.0048-L
End Mount
460.0058-L
Ceiling Mount
POWER CONSUMPTION AND UNIT RATING
MODEL
AC SPECS
DC SPECS
AC/DC standard, red
120 to 347VAC
Less than 1.5W
6 to 24VDC
AC/special DC, red
120/277/347VAC
Less than 2.5W
36 or 48 or 120VDC
Less than 1.5W
Less than 2.5W
Self-Powered red
120 to 347VAC
Less than 3W
Nickel-Cadmium battery
Minimum 60 minutes
ORDERING INFORMATION
SERIES
LSRLMCSU= universal
mounting LED SORTIE
APPROVAL
C860
COLOUR
Blank= factory white
BK= black
TG= textured grey
Other colours available.
Consult your sales representative.
EXAMPLE: LSRLMCSUC860UNIV
44
www.lumacell.com
VOLTAGE
UNIV= 120/347VAC, 6/12/24VDC
UNIV36= 120/277/347VAC, 36VDC
UNIV48= 120/277/347VAC, 48VDC
UNIV120= 120/277/347VAC, 120VDC
SP= 120 to 347VAC, Self-Powered
120VACDC2= 120VAC, 120VDC, 2 wires
OPTIONS
VRSTP= vandal resistant shield and tamper proof screws
TP= tamper proof screws
990.0119-L= tamper proof bit*
* One bit needed per order.

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project