Advertisement
Advertisement
Premise Connectivity Systems When connecting equipment in a telecommunications room, it is often necessary to cross connect using patch cables, in order to interface to the distribution cabling system. Signamax Category 6 High-Density Feed-Thru Patch Panels provide 24 and 48 modular coupling ports, while maintaining category 6 channel performance. These panels are available in a high-density version for use where rack space is at a premium. Panels are designed to accommodate both unscreened and screened inline couplers, which makes it a universal solution. Panels feature front labeling areas and come with a rear cable management bar that mounts easily to the back of the panel. Feed-thru couplers meet channel level requirements as defined in TIA/EIA-568-C.2 and provide a sound platform for supporting today's network technologies including Gigabit Ethernet. KEY FEATURES • 24- and 48-port sizes • Maximum strength and durability construction • Accommodates both unscreened and screened twistedpair keystone inline couplers • Snap-in rear cable management bar • Couplers feature straight-thru wiring scheme compatible with T568A, T568B cabling and any other wiring schemes up to 8 conductors • Couplers are rated for at least 750 plug insertions providing for the highest level of system reliability • Coupler contact design provides enhanced plug to jack connection integrity and protects against damage caused by insertion of 4- or 6-position plugs • Applications – cross-connections, horizontal consolidation points, horizontal connection points in building automation cabling, etc. Panel is designed to accommodate both unscreened and screened twisted-pair jacks as well as a variety of multimedia jacks Rear cable management bar mounts easily (snaps in) to the back of the panel Rear cable management bar comes with the panel for improved cable routing and strain relief Grounding lug is located on rear of panel for attaching 6 AWG (4.5 mm) ground conductor to ground and optional can be installed to connect panels together ORDERING INFORMATION Category 6 High Density Feed-Thru Patch Panels Part Number Description 24458FTHD-C6 24-Port Category 6 High-Density Feed-thru Patch Panel, 1.75” (1 RMS) High 48458FTHD-C6 48-Port Category 6 High-Density Feed-Thru Patch Panel, 3.0” (2 RMS) High 24458SFTHD-C6 24-Port Screened Category 6 High-Density Feed-thru Patch Panel, 1.75” (1 RMS) High 48458SFTHD-C6 48-Port Screened Category 6 High-Density Feed-Thru Patch Panel, 3.0” (2 RMS) High 24-port panels come with 1 rear cable management bar. 48-port panels come with 2 rear cable management bars. www.signamax.com 16295 N.W. 13th Avenue, Suite A Miami, FL 33169 800.446.2377 305.944.7710 Fax: 305.949.4483 Copyright 2007 Signamax/AESP, Inc. All rights reserved Signamax Connectivity Systems is a trademark of AESP, Inc. Specifications subject to change SPECIFICATIONS Category 6 High-Density Feed-Thru Patch Panels PSS.C6-HD-FT-PP B-APR-10 Premise Connectivity Systems SPECIFICATIONS • TRANSMISSION PERFORMANCE ANSI/TIA/EIA-568-C.2: category 6 (1–250 MHz) channel specifications • TRANSMISSION MEDIA 24458FTHD-C6, 48458FTHD-C6: 24458SFTHD-C6, 48458SFTHD-C6: unscreened twisted pair (U/UTP) unscreened or screened twisted pair (U/STP, F/UTP, F/STP, S/UTP, S/STP, SF/UTP, SF/STP) • JACK TYPE 8p8c (8-position, 8-contact) “RJ45” type • WIRING SCHEME Straight-thru – compatible with any wiring scheme up to 8 conductors • CONSTRUCTION Panel: steel/nickel-plated steel Cable management bar: unscreened: steel/plastic screened: nickel-plated steel Coupler housing: unscreened: high impact thermoplastic, ABS UL94V-0 fire retardant screened: screening case: copper C2680, 0.25-mm (0.0098-in), 100-µin nickel-plated contact holder: high impact thermoplastic, PBT UL94V-0 fire retardant Jack contacts: phosphor bronze 5100W temper wire, min 50 µin of gold plating over 100-µin nickel plating • ELECTRICAL Insulation resistance: Dielectric withstanding voltage: Spring wire contact resistance: DC contact resistance: Current rating: min 500 MOhm @ 100 Vdc 1,000 Vdc/ac peak contact to contact @ 60 Hz for 1 min max 20 mOhm max 0.1 Ohm see figure • MECHANICAL Insertion life: Contact force: Plug retention force: min 750 mating cycles with FCC compliant 8p8c plug min 100 g each contact with FCC compliant 8p8c plug min 50 N (11 lbf) for 60±5 s • FOOTPRINT Standard keystone footprint • MOUNTING DIMENSIONS Panel – 19-in rack mountable: 24458: H 1.75 in (1 RMU) 48458: H 3.0 in (2 RMU) Inline couplers: W 14.6 mm H 16.2 mm W 0.58 in H 0.64 in D 29.4 mm D 1.16 in • ENVIRONMENTAL CONDITIONS Storage temperature: -40 °C – +68 °C (-40 °F – 154 °F) Operating temperature: -10 °C – +60 °C (-14 °F – 140 °F) Humidity: 10 %–90 % RH • COMPLIANCE ANSI/TIA/EIA-568-C.2, FCC Part 68 Subpart F, UL 1863, IEC 60603-7 • APPLICATIONS X.21, V.11, S0, ISDN, CSMA/CD 10BASE-T, 100BASE-TX, 100BASE-T4, 100BASET2, 1000BASE-T, TR 4/16/100, 100BASE-VG, ATM LAN 25/51/155, TP-PMD • WARRANTY 5-year limited component warranty RELATED PRODUCTS Product/Product Group Spec Sheet # Category 6 Unscreened Patch Cords N/A Category 6 Screened Patch Cords N/A www.signamax.com 16295 N.W. 13th Avenue, Suite A Miami, FL 33169 800.446.2377 305.944.7710 Fax: 305.949.4483 Copyright 2007 Signamax/AESP, Inc. All rights reserved Signamax Connectivity Systems is a trademark of AESP, Inc. Specifications subject to change SPECIFICATIONS Category 6 High-Density Feed-Thru Patch Panels PSS.C6-HD-FT-PP B-APR-10 ">

Public link updated
The public link to your chat has been updated.
Advertisement