Health Care Products

Health Care Products
B-1027C HealthBrochure.qxd
7/11/06
2:02 PM
Page 2
Hospital Grade
Receptacles
Power Status
Tamper-Resistant
SmartLock Pro™
Surge & IG
Power Quality
Panels
Power Strips
Occupancy Sensors
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 3
Health Care Product Types
HOSPITAL SPEC
TAMPER-RESISTANT
● Hospital Grade
● 15-20 Amp Duplex &
Single Configurations
● Interlocking
Thermoplastic Nylon
Cover & Body
● Permanent "Green Dot"
Marked on Face
● Nickel-Plated Brass
Strap with Integral
Ground Contacts
● Back & Side Wired
Ground Termination
8300-SGI
8300-R
PAGE 5
PAGE 5
Health Care Product Types
FOUR-IN-ONE
● Hospital Grade
● 15 Amp version has a
nickel plated steel strap
● 20 Amp version has a
nickel plated brass strap
and a 1 piece mounting
strap/grounding system
● Mechanical Safety
Shutters
● Interlocking
Thermoplastic Cover
& Body
● Approved for Emergency
Circuits and
Pediatric/Psychiatric
Care Areas
GFCI SMARTLOCK®
8490-IGG
● Hospital Grade
● 15-20 Amp Configurations
● Hospital, Surge and IG Versions
●Thermoplastic Nylon Face and Body
● Universal Mounting
8598-HGW
● Hospital Grade
● 15-20 Amp Duplex
Configurations
● Back & Side Wired
● LED Status Indicator
● Prevents Reset if
Protective Function is
Compromised
● Prevents Reset in Case
of Line-Load Reverse
Wiring
● Meets New UL
GFCI Requirements,
Effective 2006
PAGES 9 & 10
PAGES 6 & 7
SURGE PROTECTION
5300-HT2
8300-PLW
PLUGS & CONNECTORS
● Hospital Grade
15 & 20 Amp Straight
& Angle Devices
● HG Power Indication
Plugs & Connectors
● 20 Amp Hospital Grade
Power Interrupting
Devices
● 15-60 Amp NEMA &
Non-NEMA Straight
Blade Devices
● 15-30 Amp NEMA &
Non-NEMA Locking
Devices
8319-C
8215-C
PAGES 11 & 12
● Six Outlet, 6’ Cord with
Hospital Grade Plug &
Receptacles
● No Switch Provided –
Power is Always ON to
Avoid Accidental
Shutdown
● Three Mode Protection
with Leakage Current
Below 100 Microamps
● Tamper Resistant
Receptacles
PAGES 11 & 22
PAGE 8
● Hospital Grade
● 15-20 Amp
Configurations
● 100,000 Hr.
Green LED Power
Status Indicator
● Permanent "Green
Dot" Lens
● Suitable for Critical
Care Areas and
Emergency Circuits
● Nickel-Plated Brass
Strap with Integral
Ground Contacts
● Full Illuminated Face
Also Available
PAGE 5
SURGE STRIPS
● Hospital Grade
15-20 Amp Duplex &
Single Configurations
● Surge & IG Versions
● Audible and Visual
Protection Status
Alarms
● Back & Side Wired
● Thermoplastic Nylon
Cover & Body
8280-IGB
POWER INDICATION
SURGE PANELS
74120-7M3
● Protection at Facility Service Entrance
● Advanced Diagnostics for Monitoring Trends
in Surge Events on LCD Display
● Models Available for Generator Transfer
Switch, Panelboard and Dedicated
Equipment Applications
PAGES 13 & 14
Occupancy Sensors
SWITCH MOUNT
ODS0D-IDW
PAGE 19
1
● Available with Infrared
and Adaptive Infrared
Technologies
● Ambient Light Override
Feature
● Single Unit Operates On
120 or 277V and Can
Handle Incandescent or
Fluorescent Loads
● Single & Dual Relay
Options
● Device Fit Standard
Switch Boxes & Utilize
Decora Wallplates
CEILING MOUNT
WALL MOUNT
ODC0S-I1W
● Infrared, Ultrasonic & Multi-Technology Units
● Individual Units Cover 180 & 360 Degrees,
Up to 2000 Square Feet
● Ambient Light Override Feature
● Self Contained Units for 120 or 277V Circuits
● Ultrasonic & Multi-Technology Units Require
Separate Power Pack
● Cage Available for High Abuse Areas
PAGES 19-21
To learn more about Leviton devices or for answers to technical questions call our Techline at
ODW12-M0D
● Available Technologies
Include Infrared,
Ultrasonic &
Multi-Technology
● Individual Units Cover
110 and 360 degrees,
up to 2500 square feet
● Ambient Light Override
Feature
● Ultrasonic & MultiTechnology Units Require
Separate Power Pack
● Infrared High-Bay
Version Available with
Secondary Relay Option
PAGE 21
1-800-824-3005 or visit us at:
www.leviton.com
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 4
Hospital Grade Testing
Testing For Hospital Grade Listing Of
Plugs, Connectors, and Receptacles Includes:
500 lb. Crush Test
A wired plug or connector is placed between
two steel plates and subjected to a force which
is steadily increased to 500 pounds. “There
shall be no breakage, deformation or other
effect that may interfere with the function of the
device.” Leviton knows that in real industrial
environments, plugs and connectors are
crushed by forces exceeding 500 lbs. We
perform the crush test with a force of 2500 lbs.
to ensure that our devices withstand the really
heavy hits on the job.
Abrupt Removal of Plug Test
Cord Pull Test
Heavy-duty cord stress is typical abuse for
industrial plugs and connectors. Leviton
increases the weight in the straight cord pull
test to 175 lbs. with AWG 14 ST and in the
rotating pull test to 20 lbs., ensuring positive
strain relief under industrial conditions.
Impact Test
A wired plug or connector is subjected to
impact from a 10 lb. weight repeatedly
dropped from a height of 18 inches. “There
shall be no breakage, deformation or other
effect that may interfere with the function of
the device.” Plugs and connectors are subjected to severe impacts in industrial settings.
Therefore, Leviton exceeds the UL requirement by dropping the weight from a height of
36 inches.
+4 oz.
Ground Pin Retention Test
Mechanical Drop Test
A sample wired plug or connector
is suspended horizontally by its attached cord,
and released so that it impacts a hard wood
surface 45 inches below the point of
suspension--repeated for 1300 cycles. “There
shall be no breakage, deformation, or other
damage which would interfere with the functioning of the device.”
The grounding contact of the receptacle is
conditioned by 20 insertions with a .204”
oversized pin. After conditioning, a 0.184”
diameter pin shall be inserted in the grounding contact which shall be capable of supporting at least four ounces for one minute.
Hospital Grade Device Testing
The cord must remain securely fastened after
straight pulls of 30 pounds, and rotating pulls
(in a 3-inch circle) of 10 pounds for two hours.
“Displacement of conductors, insulation, and
outer jacket of the flexible cord AWG 18 SVT
shall not exceed 1/32 inch. There shall be no
cuts, rips, or tears in cord insulation.”
A steel-bodied test plug with brass blades
is inserted into the receptacle. A 10-pound
weight dropped from at least 24 inches
yanks the plug out of the receptacle. This
test is done eight times with the receptacle
rotated into different positions to create the
greatest stress on its face and contact. After
this, the grounding contact must retain a
four ounce, 0.184” diameter grounding pin,
with the receptacle face down, for one
minute. There shall be no breakage of the
receptacle that interferes with the receptacle
function or the integrity of the enclosure. The
receptacle shall maintain the grounding path
integrity through the receptacle.
1.5 lb.
Assembly Security Test
A force of 100 pounds is applied through the slots to the base of the receptacle while the yoke
is supported at its screw mounting positions. There must be no cracking of base or permanent
deformation of yoke.
In addition...
Leviton Hospital Grade receptacles undergo these demanding tests:
• Strength of insulating base
• Ground contact temperature
• Impact test
• Ground Contact Resistance
• Terminal Strength Test
• Resistance of Ground
• Fault current
• Gripping
• Overload
• Temperature
• Dielectric withstand
• Insulation resistance
• Assembly security
• Receptacle ground contact
• Horsepower
Power Blade Retention Test
A test plug with oversized blades of .075” is
inserted into the current-carrying opening of
the receptacle for 20 conditioning cycles.
After the conditioning cycles, the contact
shall be capable of supporting for one
minute 11/2 lbs. secured to a single .055”
thick solid steel blade without holes.
2
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
To learn more about Leviton devices or for answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
www.leviton.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 5
Frequently Asked Questions
Health Care Facilities Code
and Application Related Questions
Wiring Devices
1. What are the requirements for
receptacles in General Care Patient
Bed Locations?
NEC Article 517.18 (B)
Must be hospital grade and have a
permanent means of identification.
Must
Frequently Asked Questions
have a minimum of four receptacle
outlets.
2. What are the requirements for
receptacles in Pediatric Locations?
NEC Article 517.18 (C)
Must be hospital
grade and have a
permanent means of
identification.
Must
be listed as
Tamper Resistant
3. What are the requirements for
receptacles in Critical Care Patient
Bed locations?
NEC Article 517.19 (B)(1)
Must be identified as hospital grade
with a permanent indicator.
Must
have a minimum of six receptacle
outlets.
4. True or False: Receptacles supplied by
the emergency power system shall have
distinctive color or marking
as to be readily identifiable.
True.
NEC Article 517.41 (E)
and NFPA 99, 3-5.2.2.4
Requires receptacles on
the emergency circuit to be
readily identified.
Device
color or wall plate
5. What are the requirements for
receptacles and fixed equipment
installed in wet locations?
NEC Article 517.20 (A)
All receptacles and fixed equipment
within the area of the wet location shall
have ground-fault circuit-interrupter
protection for personnel
if interruption under
fault conditions can
be tolerated. If served
by an isolated power
system, ground fault
circuit interrupter
protection is not required.
GFCI
protection is not required for
receptacles installed in critical care
areas where the toilet and basin are
installed within the patient room.
6.What are the testing and maintenance
requirements for electrical receptacles
in health care facilities?
NFPA 99, Chapter 3-3 Section 3-3.3.3
Visual integrity, ground continuity,
polarity and ground
blade retention
force.
Chapter 3-3
Section 3-3.4.2.3
Testing shall be
performed after
initial installation,
replacement or
servicing. Additional
testing shall be performed at intervals
defined by documented performance
data.
Exception: Receptacles not listed as
hospital grade shall be testing at intervals
not exceeding 12-months.
ID.
3
To learn more about Leviton devices or for answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
www.leviton.com
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 6
Frequently Asked Questions
1. How does a surge protector work?
A Surge Protector, sometimes called
a TVSS (transient voltage surge
suppressor); Diverts surge currents away
from equipment by creating a low
impedance path to ground.
5. What are the three basic types of
occupancy sensor technologies?
Passive Infrared (PIR) 'Line-of-sight'
device that responds to infrared
changes in a workspace.
Ultrasonic devices transmit ultrasonic
frequencies (32kHz-40kHz) and
monitor workspace changes.
'Line-of-sight not required'.
Multi-Technology single unit that
combines PIR and Ultrasonic to control
lighting loads in a workspace.
Typical components
include:
MOV: Metal-Oxide
Varistor
SAD: Silicon
Avalanche Diodes
LCR
filters
2. How do surges enter a building?
Surges Enter A System In Two Ways:
Conducted (Directly On Lines Entering
or Leaving A System)
Radiated
(Indirectly Via Electromagnetic Fields)
3. What is IEEEC62.41?
The Institute of Electrical and Electronic
Engineers have developed C62.41 59
to provide recommended guidelines on
surge exposure levels with respect to
location. The standard amplitudes and
wave forms are the basis for testing
surge receptacles.
4. Does the NEC cover installation of
Transient Voltage Surge Suppressors?
Yes. NEC Article 285 TVSS Protection
covers short circuit rating and installation
and connection of TVSS or Surge
Protection panels.
6. Can occupancy sensors save energy
and reduce power bills?
Yes. Since lighting
accounts for 50% of the
electricity usage in a typical
commercial or institutional
facility turning those loads
off when not required can
have a considerable impact
on the bottom line.
7. Are adjustments required to make sure
the lights do not go off while the
workspace is occupied?
Most commercial grade
occupancy sensors are
self adjusting. After initial
installation the device
monitors occupancy
patterns and automatically
compensates for 'real-time'
usage and sets itself
accordingly.
Frequently Asked Questions
Gas Tubes
For the complete line of Power Quality products,
request the Power Quality Product Line Bulletin (C-678A).
For the complete line of Occupancy Sensor Products request the
Occupancy Sensors Product Guide (G-7164).
For the complete line of Lighting Controls products,
request the Lighting Controls Product Catalog (G-6960).
4
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
To learn more about Leviton devices or for answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
www.leviton.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 7
15A 125V&250V;20A 125V&250V
10 YEAR LIMITED
Hospital Grade
NEMA 5-15R
DIELECTRIC
VOLTAGE
CURRENT
INTERR.
Withstands
2000V
per
UL 498
Full
rated
current
NEMA 5-20R
MECHANICAL
ELECTRICAL
TERMINAL
I.D.
TEMP.
RISE
TERMINAL
ACCOMM.
Brass, hot
Max 30C
after 250
cycles of
overload at
200% of
rated current
White,neutral
NEMA 6-20R
STANDARDS & CERTIFICATIONS
PRODUCT
I.D.
Ratings are
permanently
marked
on device
#14 - #10 AWG
Grounding
NEMA 6-15R
NEMA ANSI UL UL Fed Spec
WD-6 C-73 498HG
WC-596
#E13399
#E13399
CSA
NOM
C22.2 No. 42
#152105 #057
AC HORSEPOWER RATINGS
15A 125V 15A 250V 20A 125V 20A 250V
ENVIRONMENTAL
FLAMMABILITY
OPERATING TEMP.
Rated V-2 per UL 94
-40C to 60C
.5
1.5
1.0
2.0
Hospital Grade Straight Blade Receptacles
Back & Side Wired, Self-Grounding
8200-HI
8300-E
FACE
COLOR
HOSP. GRD.
DUPLEX
8300-L
8300-HLI
8300-SGI
HOSP. GRD.
SLIM
DUPLEX
HOSP. GRD.
DUPLEX TAMPER
RESISTANT
HOSP. GRD.
DUPLEX
ILLUMINATED
HOSP. GRD.
DUPLEX
w/6” Wire Leads
8300-PLW
8210-R
HOSP. GRD.
DUPLEX
HOSP. GRD.
SINGLE
w/Green LED Power Status
Indicator
Brown
Ivory
White
Gray
Red
8200
8200-I
8200-W
8200-G
8200-R
8200-H
8200-HI
8200-HW
8200-HG
8200-HR
15A 125V, NEMA 5-15R
8200-SG
–
8200-SGI
8200-HLI
8200-SGW
8200-HLW
8200-SGG
–
8200-SGR
8200-HLR
8200-L
8200-LI
8200-LW
8200-LGY
8200-LR
–
8200-PLI
8200-PLW
–
8200-PLR
8210
8210-I
8210-W
–
8210-R
Brown
Ivory
White
Gray
Red
Black
Almond
8300
8300-I
8300-W
8300-G
8300-R
8300-E
–
8300-H
8300-HI
8300-HW
8300-HGY
8300-HR
–
–
20A 125V, NEMA 5-20R
8300-SG
–
8300-SGI
8300-HLI
8300-SGW
8300-HLW
8300-SGG
–
8300-SGR
8300-HLR
–
–
–
–
8300-L
8300-LI
8300-LW
8300-LGY
8300-LR
8300-LE
8300-LA
–
8300-PLI
8300-PLW
–
8300-PLR
–
–
8310
8310-I
8310-W
8310-G
8310-R
–
–
FACE
COLOR
HOSP. GRD.
DUPLEX
15A 250V, NEMA 6-15R
Brown
8600
Ivory
8600-I
White
–
Gray
–
Red
–
20A 250V, NEMA 6-20R
Brown
8400
Ivory
8400-I
White
–
Gray
–
Red
–
Black
–
8400
1.11
(28.1 mm)
1.53
(38.9 mm)
1.21
(38.4 mm)
Midway 302/304 non-magnetic stainless
steel wallplates provide more coverage of
wall openings to conceal imperfections that
might occur during sheetrock installation.
1.55
(39.5 mm)
1.51
(38.5 mm)
0.85
(21.6 mm)
1.12
(28.4 mm)
1.38
(33.7 mm)
0.82
(20.8 mm)
1.33
(33.7 mm)
1.06
(30 mm)
1.31
(33.3 mm)
0.88
(22.3 mm)
1.31
(33.3 mm)
8200, 8300, 8200-PL,
8300-PL, 8400, 8600
5
1.31
(33.3 mm)
8200-H, 8300-H
1.31
(33.3 mm)
8200-SG
To learn more about Leviton devices or for answers to technical questions call our Techline at
1.31
(33.3 mm)
1-800-824-3005 or visit us at:
4.06 (103.2 mm)
2.38 (60.3 mm)
8200-HL, 8300-HL
3.28 (83.3 mm)
3.28 (83.3 mm)
0.87
(22.1 mm)
4.06 (103.2 mm)
2.77 (103.2 mm)
3.28 (83.3 mm)
1.18
(29.9 mm)
4.06 (103.2 mm)
2.76 (70.0 mm)
3.28 (83.3 mm)
0.87
(22.1 mm)
4.06 (103.2 mm)
2.77 (70.4 mm)
3.28 (83.3 mm)
15A
125V
4.06 (103.2 mm)
2.78 (70.6 mm)
LEVITON
8210, 8310
www.leviton.com
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 8
15A 125V;20A 125V
Hospital Grade
10 YEAR LIMITED
NEMA 5-15R
NEMA 5-20R
ELECTRICAL
DIELECTRIC
VOLTAGE
CURRENT
INTERR.
Withstands
2000V
per
UL 498
Full
rated
current
MECHANICAL
TERMINAL
I.D.
TEMP.
RISE
Brass, hot
PRODUCT
I.D.
Ratings are
permanently
marked
on device
#14 - #10 AWG
Grounding
White,neutral
#E13399
#E13399
CSA
NOM
C22.2 No. 42
#152105 #057
AC HORSEPOWER RATINGS
15A 125V 15A 250V 20A 125V 20A 250V
ENVIRONMENTAL
FLAMMABILITY
OPERATING TEMP.
Rated V-2 per UL 94
-40C to 60C
Back & Side Wired
NEMA ANSI UL UL Fed Spec
WD-6 C-73 498HG
WC-596
.5
1.5
1.0
2.0
4-in-1 Side Wired
Split Circuit Not Available
1254-IGW
8200-IGB
FACE
COLOR
HOSPITAL GRADE
IG DUPLEX
8490-IGG
HOSPITAL GRADE
IG 4-IN-1
HOSPITAL GRADE
IG 4-IN-1 SURGE
8210-IG
8200-LIG
HOSPITAL GRADE
IG DUPLEX
HOSPITAL GRADE
IG SINGLE
w/6” Ground Lead
Refer to page 7 for Terminal Accom. & Device Drawings
w/6” Ground Lead
–
–
–
–
–
8200-LIG
–
–
–
–
–
8210-IG
–
–
–
–
–
8300-LIG
–
–
–
–
–
8310-IG
Brown
Ivory
White
Gray
Red
Orange
8200-IGB
8200-IGI
8200-IGW
8200-IGG
8200-IGR
8200-IG
15A 125V, NEMA 5-15R
–
–
1254-IGI
–
1254-IGW
8480-IGW
–
8480-IGG
–
–
1254-IG
8480-IG
Brown
Ivory
White
Gray
Red
Orange
8300-IGB
8300-IGI
8300-IGW
8300-IGG
8300-IGR
8300-IG
–
21254-IGI
21254-IGW
–
–
21254-IG
20A 125V, NEMA 5-20R
NYLON WALLPLATES
ISOLATED GROUND
EMERGENCY
–
–
8490-IGW
8490-IGG
–
8490-IG
302 STAINLESS STEEL WALLPLATES
WEATHER RESISTANCE
COVERS DIE-CAST ZINC
ISOLATED GROUND
80703-IG 80703-RE 80704-IG
80716-I
84004-40 84003-40
84016-40
84005-40
4925-2
4970
3.28 (83.3 mm)
2.77 (103.2 mm)
3.28 (83.3 mm)
8200-IG, 8300-IG
4.06 (103.2 mm)
2.77 (70.4 mm)
1.31
(33.3 mm)
1.38
(33.7 mm)
0.87
(22.1 mm)
1.31
(33.3 mm)
0.82
(20.8 mm)
1.33
(33.7 mm)
1.06
(30 mm)
1.31
(33.3 mm)
8200-LIG, 8300-LIG
4.06 (103.2 mm)
1.12
(28.4 mm)
2.38 (60.3 mm)
1.55
(39.5 mm)
0.87
(22.1 mm)
4.06 (103.2 mm)
1.12
(28.4 mm)
3.28 (83.3 mm)
FOR ADDITIONAL WALLPLATE OPTIONS SEE IPD 2.05 CATALOG
Hospital Grade Straight Blade Isolated Ground Receptacles
Max 30C
after 250
cycles of
overload at
200% of
rated current
STANDARDS & CERTIFICATIONS
TERMINAL
ACCOMM.
8210-IG, 8310-IG
6
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
To learn more about Leviton devices or for answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
www.leviton.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 9
15A 125V; 20A 125V
Hospital Grade
10 YEAR LIMITED
NEMA 5-15R
MECHANICAL
ELECTRICAL
DIELECTRIC
VOLTAGE
CURRENT
INTERR.
Withstands
2000V
per
UL 498
Full
rated
current
TERMINAL
I.D.
TEMP.
RISE
TERMINAL
ACCOMM.
PRODUCT
I.D.
Ratings are
permanently
marked
on device
#14 - #10 AWG
Grounding
White,neutral
NEMA ANSI UL UL Fed Spec CSA NOM
C22.2 No. 42
WD-6 C-73 498HG
WC-596
#E13399
#E13399
#152105
#057
AC HORSEPOWER RATINGS
15A 125V 15A 250V 20A 125V 20A 250V
ENVIRONMENTAL
FLAMMABILITY
OPERATING TEMP.
Rated V-2 per UL 94
-40C to 60C
.5
1.5
1.0
2.0
Side Wired
For clamping and
performance data refer
to page 8.
Split Circuit Not Available
Split Circuit Not Available
1254-HW
1254-IG
FACE
COLOR
HOSPITAL GRADE
Brown
Ivory
White
Gray
Red
Black
Orange
Blue
1254-H
1254-HI
1254-HW
–
1254-HR
–
–
–
Brown
Ivory
White
Gray
Red
Black
Orange
Blue
21254-H
21254-HI
21254-HW
21254-HGY
21254-HR
–
HOSPITAL GRADE
IG
HOSPITAL GRADE
IG, SURGE
15A 125V, NEMA 5-15R
–
1254-IGI
1254-IGW
–
–
–
1254-IG
–
20A 125V, NEMA 5-20R
–
21254-IGI
21254-IGW
–
–
HOSPITAL GRADE
SURGE
–
8480-IGI
8480-IGW
8480-IGG
–
–
8480-IG
8480-IGB
–
8480-I
8480-W
–
8480-R
–
–
–
–
8490-IGI
8490-IGW
8490-IGG
–
–
8490-I
8490-W
–
8490-R
–
–
21254-IG
–
–
8490-R
8490-IGG
–
8490-IG
8490-IGB
–
Four-In-One Adapter Plates
–
–
Four-In-One Portable Boxes
Accepts #16/3 AWG Type SJ to #12/3 AWG
Type SO COPPER Only.
3254
3254-I
3254-W
3254-GY
3254-R
3254-E
3254-OR
3254-BLU
4.50 (114.3 mm) square
3.38 (85.9 mm)
Ivory
Gray
Black
Orange
Blue
Yellow
0.68 (17.1 mm)
3.28 (83.3 mm) square
3.38 (85.9 mm)
4” Octagon
4254-I
4254-GY
4254-E
4254-OR
4254-BLU
4254-Y
Portable boxes are not UL Listed.
4.50 (114.3 mm) square
3.38 (85.9 mm) square
Single-Gang
PORTABLE
BOX
4.80 (121.9 mm) square
.90
(22.9 mm)
4 knockouts
0.66
ø (16.8)
0.25 (6.4 mm)
0.42 (10.7 mm)
0.12 (3.2 mm)
2.75 (69.8 mm)
0.31
(7.9 mm)
Feed Thru Wire Hole
2.73 (69.3 mm)
Mounts
Directly
BOX
COLOR
3.38 (85.9 mm)
Brown
Ivory
White
Gray
Red
Black
Orange
Blue
ADAPTER
PLATE
3.28 (83.4 mm)
PLATE
COLOR
4.25 (107.9 mm)
Hospital Grade Four-In-One Straight Blade Receptacles
Brass, hot
Max 30C
after 250
cycles of
overload at
200% of
rated current
NEMA 5-20R
STANDARDS & CERTIFICATIONS
Mounts
with
Adapter
Plate
2-Gang
1.75
(44.4 mm)
3.38 (85.9 mm
1.15 (29.2mm)
4” Square
7
DIMENSIONS APPLY TO ALL
FOUR-IN-ONE RECEPTACLES
4254
To learn more about Leviton devices or for answers to technical questions call our Techline at
1.73
(43.9 mm)
1-800-824-3005 or visit us at:
411/16” Square
3254
www.leviton.com
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 10
15A 125V; 20A 125V
Hospital Grade
10 YEAR LIMITED
NEMA 5-15R
NEMA 5-20R
ELECTRICAL
DIELECTRIC
VOLTAGE
CURRENT
INTERR.
Withstands
2000V
per
UL 498
Full
rated
current
TEMP.
RISE
MECHANICAL
TERMINAL
I.D.
TERMINAL
ACCOMM.
Brass, hot
Max 30 C
after 250
cycles of
overload at
200% of
rated current
#14 - #10 AWG
Grounding
STANDARDS & CERTIFICATIONS
PRODUCT
I.D.
Ratings are
permanently
marked
on device
White,neutral
NEMA ANSI UL UL Fed Spec
WD-6 C-73 498HG
WC-596
#E13399
–
CSA
NOM
C22.2 No. 42
#152105
#057
AC HORSEPOWER RATINGS
15A 125V 15A 250V 20A 125V 20A 250V
ENVIRONMENTAL
FLAMMABILITY
OPERATING TEMP.
Rated V-2 per UL 94
-40C to 60C
.5
1.5
1.0
2.0
Back & Side Wired
8280-IGO
8281-IGI
HOSPITAL GRADE
SURGE, DUPLEX
HOSPITAL GRADE
SURGE, SINGLE
HOSPITAL GRADE
IG, SURGE, DUPLEX
Indicator Light,
Audible Alarm
Indicator Light,
Audible Alarm
Indicator Light,
Audible Alarm
Brown
Ivory
White
Gray
Red
Blue
Black
Orange
Almond
8280
8280-I
8280-W
–
8280-R
8280-B
–
–
–
Brown
Ivory
White
Gray
Red
Black
Blue
Orange
Almond
8380
8380-I
8380-W
8380-GY
8380-R
–
8380-B
–
–
15A 125V, NEMA 5-15R
–
–
–
–
–
–
–
–
–
20A 125V, NEMA 5-20R
8381
8381-I
–
8381-GY
8381-R
–
–
–
–
Back View
HOSPITAL GRADE
IG, SURGE, SINGLE
Indicator Light,
Audible Alarm
–
8280-IGI
8280-IGW
8280-IGG
–
8280-IGB
–
8280-IGO
8280-IGA
–
8281-IGI
8281-IGW
–
–
–
–
8281-IGO
8281-IGA
–
8380-IGI
8380-IGW
8380-IGG
8380-IGR
–
8380-IGB
8380-IGO
–
–
8381-IGI
8381-IGW
–
–
–
8381-IGB
8381-IGO
–
CLAMPING PERFORMANCE
PERFORMANCE DATA
MAXIMUM
SINGLE-PULSE
(8x20µs)
L-N/L-G/N-G
EMI-RFI NOISE
REJECTION
@ 50 Ohms
500K - 30MHz
UL1449 SUPPRESSED
VOLTAGE RATINGS (SVR)
Assigned at 6" lead length with 6kV/500A
impulse in accordance with UL1449 (2nd Ed.)
50, 60Hz
150V rms
720
24kA/12kA/12kA
-30dB
400/400/400Vpk
1.47 (37.3 mm)
3.81 (96.8 mm)
MAXIMUM
SINGLE-PULSE
(10x1000µs)
Joules
3.28 (83.3 mm)
MAXIMUM
CONTINUOUS
OPERATING
VOLTAGE (MCOV)
2.70 (68.6 mm)
OPERATING
FREQUENCY
Hospital Grade AC Decora Surge Receptacles
8381-GY
8380
FACE
COLOR
1.70 (43.2 mm)
SURGE RECEPTACLES
To learn more about Leviton devices or for answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
www.leviton.com
8
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 11
15A 125V
10 YEAR LIMITED
Hospital Grade
NEMA 5-15R
MECHANICAL
ELECTRICAL
DIELECTRIC
VOLTAGE
CURRENT
INTERR.
Withstands
2000V
per
UL 498
Full
rated
current
TERMINAL
I.D.
TEMP.
RISE
TERMINAL
ACCOMM.
Brass, hot
Max 30C
after 250
cycles of
overload at
200% of
rated current
#14 - #10 AWG
Grounding
STANDARDS & CERTIFICATIONS
PRODUCT
I.D.
Ratings are
permanently
marked
on device
White,neutral
NEMA ANSI UL UL Fed Spec CSA NOM
WD-6 C-73 498HG
WC-596 C22.2 No. 42
#E13399
–
#152105
#057
AC HORSEPOWER RATINGS
15A 125V 15A 250V 20A 125V 20A 250V
ENVIRONMENTAL
FLAMMABILITY
OPERATING TEMP.
Rated V-2 per UL 94
-40C to 60C
.5
1.5
1.0
2.0
Hospital Grade AC Decora Plus Receptacles
Back & Side Wired, Self-Grounding
Note: This device
meets UL Fed
Spec WC-596
requirements
16262-HGR
FACE
COLOR
Brown
Ivory
White
Gray
Red
Black
Blue
Orange
Almond
Light
Almond
HOSPITAL GRADE
DUPLEX
16262-SG
16262-SGI
16262-SGW
16262-SGG
16262-SGR
–
–
–
–
–
–
80309-I
16262-IG
HOSPITAL GRADE
DUPLEX
TAMPER-RESISTANT
–
16262-HGI
16262-HGW
16262-HGG
16262-HGR
–
–
–
–
SCREWLESS
SNAP-ON WALLPLATES
80301-I
16262-SGW
HOSPITAL GRADE
IG DUPLEX
HOSP. GRD. SMARTLOCK®
w/ LED - GFCI DUPLEX
w/ LOCKOUT
w/Green LED Power
Status Indicator
Self-Grounding Does Not Apply
–
16262-PLI
16262-PLW
–
16262-PLR
–
–
–
–
–
7599-HG
7599-HGI
7599-HGW
7599-HGG
7599-HGR
–
–
–
7599-HGA
–
7599-HGT
302 STAINLESS STEEL
WALLPLATES
80409-NE
84409-40
• Meets or Exceeds
UL, 2006 Requirements
• Smart Lock® GFCI Prevents
Reset in Case of Line-Load
Reverse Wiring
• Greater Protection Against Loss
of Ground Fault Protection Due to
Surges, Abuse and Overvoltages
• Device Prevents Reset If Its
Protective Function Has Been
Compromised
84411-40
1.31
(33.3 mm)
0.88 (22.4 mm)
7599-HGR
HOSPITAL GRADE
DUPLEX
15A 125V, NEMA 5-15R
–
16262-IGI
16262-IGW
16262-IGG
16262-IGR
–
16262-IGB
16262-IG
–
NYLON
WALLPLATES
80401-NE
16262-PLR
1.53 (38.9 mm)
1.7 (43.2 mm)
1.12 (28 mm)
15A 125V
RECEPTACLE
4.21 (106.93 mm)
TEST MONTHLY
TEST MENSUEL
TEST MONTHLY
TEST MENSUEL
2.7 (68.6 mm)
CLASS
15 AMP
GFCI
3.81 (96.8 mm)
TEST
RESET
3.28 (83.3 mm)
TEST
RESET
2.78 (70.6 mm)
FOLLOW DIRECTIONS
SUIVEZ INSTRUCTION
RESET
FOLLOW DIRECTIONS
SUIVEZ INSTRUCTION
4.06 (103.2 mm)
15A 125V
RECEPTACLE
125V
TEST
TEST
RESET
LEVITON
CLASS A
1.14
(29.0 mm)
1.52
(38.7 mm)
16262 & 16362 SERIES
9
To learn more about Leviton devices or for answers to technical questions call our Techline at
7599-HG SERIES
1-800-824-3005 or visit us at:
www.leviton.com
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 12
15A 125V
10 YEAR LIMITED
Hospital Grade
NEMA 5-20R
MECHANICAL
ELECTRICAL
DIELECTRIC
VOLTAGE
CURRENT
INTERR.
Withstands
2000V
per
UL 498
Full
rated
current
TERMINAL
I.D.
TEMP.
RISE
TERMINAL
ACCOMM.
Brass, hot
Max 30C
after 250
cycles of
overload at
200% of
rated current
#14 - #10 AWG
Grounding
STANDARDS & CERTIFICATIONS
PRODUCT
I.D.
Ratings are
permanently
marked
on device
White,neutral
NEMA ANSI UL UL Fed Spec
WD-6 C-73 498HG
WC-596
#E13399
–
CSA
NOM
C22.2 No. 42
#152105
#057
AC HORSEPOWER RATINGS
15A 125V 15A 250V 20A 125V 20A 250V
ENVIRONMENTAL
FLAMMABILITY
OPERATING TEMP.
Rated V-2 per UL 94
-40C to 60C
.5
1.5
1.0
2.0
Back & Side Wired, Self-Grounding
FACE
COLOR
16362-PLR
16362-IG
16362-HGI
HOSPITAL GRADE
DUPLEX
HOSPITAL GRADE
IG DUPLEX
80301-I
–
80309-I
Meets 2003 UL Requirements
20A 125V, NEMA 5-20R
–
–
16362-IGI
16362-PLI
16362-IGW
16362-PLW
16362-IGG
–
16362-IGR
16362-PLR
–
–
16362-IGB
–
16362-IG
–
–
–
–
16362-HGI
16362-HGW
16362-HGG
16362-HGR
–
–
–
–
–
SCREWLESS
SNAP-ON WALLPLATES
HOSP. GRD. SMARTLOCK®
w/ LED - GFCI DUPLEX w/ LOCKOUT
w/Green LED Power
Status Indicator
Self-Grounding Does Not Apply
Brown
Ivory
White
Gray
Red
Black
Blue
Orange
Almond
Light
Almond
7899-HGW
HOSPITAL GRADE
DUPLEX
NYLON
WALLPLATES
80401-NE
–
7899-HGT
302 STAINLESS STEEL
WALLPLATES
80409-NE
84409-40
• Meets or Exceeds
UL, 2006 Requirements
• SmartLock® GFCI Prevents
Reset in Case of Line-Load
Reverse Wiring
• Greater Protection Against Loss
of Ground Fault Protection Due to
Surges, Abuse and Overvoltages
• Device Prevents Reset If Its
Protective Function Has Been
Compromised
84411-40
1.31
(33.3 mm)
0.88 (22.4 mm)
7899-HG
7899-HGI
7899-HGW
7899-HGG
7899-HGR
–
–
–
7899-HGA
1.53 (38.9 mm)
Hospital Grade AC Decora Plus Receptacles
Note: This device
meets UL Fed
Spec WC-596
requirements
1.7 (43.2 mm)
1.12 (28 mm)
4.21 (106.93 mm)
TEST MONTHLY
TEST MENSUEL
TEST MONTHLY
TEST MENSUEL
2.7 (68.6 mm)
CLASS
20 AMP
GFCI
3.81 (96.8 mm)
TEST
3.28 (83.3 mm)
TEST
RESET
RESET
2.78 (70.6 mm)
FOLLOW DIRECTIONS
SUIVEZ INSTRUCTION
TEST
FOLLOW DIRECTIONS
SUIVEZ INSTRUCTION
4.06 (103.2 mm)
15A 125V
RECEPTACLE
15A 125V
RECEPTACLE
125V
TEST
RESET
RESET
LEVITON
CLASS A
1.14
(29.0 mm)
1.52
(38.7 mm)
16262 & 16362 SERIES
To learn more about Leviton devices or for answers to technical questions call our Techline at
7899-HG SERIES
1-800-824-3005 or visit us at:
www.leviton.com
10
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 13
15A 125; 20A 125&250V
Hospital Grade
10 YEAR LIMITED
NEMA 5-15P NEMA 5-15R
DIELECTRIC
VOLTAGE
CURRENT
INTERR.
Withstands
2000V
per
UL 498
Full
rated
current
TEMP.
RISE
30C max at full
rated current
after 50 cycles
overload at
150% rated
current for both
AC and DC per
UL 498
TYPE
NEMA 6-20P NEMA6-20R
STANDARDS & CERTIFICATIONS
TERMINAL TERMINAL PRODUCT CORD GRIP
I.D.
ACCOMM.
I.D.
RANGE
Ratings &
Brass, hot
NEMA I.D. .245" - .700"
#18 - #10
Grounding
permanently
AWG
marked on device
White,neutral
NEMA ANSI UL UL Fed Spec
WD-6 C-73 498 Listed WC-596
#E13393
CSA
NOM
C22.2 No. 42
#LR-406 #057
ENVIRONMENTAL
FLAMMABILITY
OPERATING TEMP.
Rated V-2 per UL 94
-40C to 60C
8315-CT
8315-CAT
8319-C
PLUG
CONNECTOR
ANGLE PLUG
15A 125V, NEMA 5-15P AND 5-15R, 2-P 3-W
Black & White
Transparent
Lighted Transparent
8215-C
8215-CT
8215-PLC
Black & White
Transparent
Lighted Transparent
20A 125V, NEMA 5-20P AND 5-20R, 2-P 3-W
8315-C
8319-C
8315-CT
8319-CT
8315-PLC
8319-PLC
8219-C
8219-CT
8219-PLC
–
8215-CAT
–
–
8315-CAT
–
20A 250V, NEMA 6-20P AND 6-20R, 2-P 3-W
Transparent
–
–
8415-CAT
SURGE SUPPRESSOR PLUG
STRIP w/ MULTI-STAGE
PROTECTION
CORD LENGTHS
SURGE SUPPRESSOR PLUG
STRIP w/ MULTI-STAGE
PROTECTION
See Additional Strips
Page 22
CORD LENGTH
6' and 15'
6'
(without switch)
(without switch)
6-HG, TAMPER-RESISTANT
OUTLETS & HOSP. GRADE
LIGHTED
TRANSPARENT PLUG
6-HG, TAMPER-RESISTANT
OUTLETS & HOSP. GRADE
LIGHTED
TRANSPARENT PLUG
15A 120V
NEMA 5-15P & 5-15R
2-P 3-W
20A 120V NEMA
5-20 P, Plug & 5-20R
Receptacles 2-P 3-W
5300-HTS (6')
5300-H15 (15')
5300-HTS
5300-HT2
5300-HT2
Ø 1.39 (35.3 mm)
Ø 1.39 ( 35.3 mm)
PLUGS
0.97 (24.7 mm)
1.57 (39.9 mm)
2.76 (70.1 mm)
1.05 (26.8 mm)
Ø 1.53 ( 38.9 mm)
11
NEMA 5-20P` NEMA 5-20R
MECHANICAL
1.98 (50.4 mm)
Hospital Grade Straight Blade Plugs & Connectors, Power Strips
ELECTRICAL
Ø 1.49 (37.9 mm)
CONNECTORS
To learn more about Leviton devices or for answers to technical questions call our Techline at
1.15 (29.2 mm) dia.
ANGLE PLUGS
1-800-824-3005 or visit us at:
www.leviton.com
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 14
15A 125V & 250V; 20A 125V & 250V
Hospital Grade
10 YEAR LIMITED
ELECTRICAL
DIELECTRIC
VOLTAGE
CURRENT
INTERR.
Withstands
2000V
per
UL 498
Full
rated
current
STANDARDS & CERTIFICATIONS
MECHANICAL
TEMP.
RISE
30C max at full
rated current
after 50 cycles
overload at
150% rated
current for both
AC and DC per
UL 498
TERMINAL TERMINAL PRODUCT CORD GRIP
I.D.
ACCOMM.
I.D.
RANGE
Ratings &
Brass, hot
NEMA I.D. .245" - .700"
#18 - #10
Grounding
permanently
AWG
marked on device
White,neutral
NEMA ANSI UL UL Fed Spec
WD-6 C-73 498 Listed WC-596
#E13393
CSA
NOM
C22.2 No. 42
#LR-406 #057
ENVIRONMENTAL
FLAMMABILITY
OPERATING TEMP.
Rated V-2 per UL 94
-40C to 60C
TM
PLUGS AND CONNECTORS
8456-V
8259-V
STRAIGHT BLADE
PYTHON PLUG
23004-HG
23000-HG
23001-HG
STRAIGHT BLADE
PYTHON CONNECTOR
NEMA
15A 125V, 2-P 3-W, Grounding
White
8256-V
8259-V
–
NEMA 5-15P
NEMA 5-15R
NEMA 6-15P
NEMA 6-15R
NEMA 5-20P
NEMA 5-20R
NEMA 6-20P
NEMA 6-20R
15A 250V, 2-P 3-W, Grounding
8656-V
White
8659-V
20A 125V, 2-P 3-W, Grounding
White
8356-V
8359-V
20A 250V, 2-P 3-W, Grounding
8456-V
White
POWER INTERRUPTING
DEVICES
LOCKING
PLUG
8459-V
LOCKING
CONNECTOR
LOCKING
FLUSH RECEPTACLE
w/ THERMOSET BODY
302
STAINLESS STEEL
WALLPLATE
NON-NEMA
Hospital Grade Plugs & Connectors
8256-V
COLOR
20A 125V, Non-NEMA, 2-P 3-W, Grounding
UL Listed for "HOSPITAL USE ONLY" applications in non-hazardous areas.
W
Y
GR
Gray & Black
23004-HG
23001-HG
23000-HG
GR
X
NON-NEMA
NON-NEMA
84004-40
1.69 (42.9 mm)
1.69 (42.9 mm)
2.50 (64.0 mm)
1.81 (46.0 mm)
PYTHON
PLUGS
1.41 (35.7 mm)
PYTHON
CONNECTORS
3.25 (82.6 mm)
2.31 (58.7 mm)
3.63 (92.1 mm)
1.40 (35.7 mm)
1.50 (38.1 mm)
1.50 (38.1 mm)
23001-HG
23004-HG
To learn more about Leviton devices or for answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
www.leviton.com
12
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 15
Panel Mounted Devices
10 YEAR LIMITED
74000 & 75000 Series - For Industrial & Commercial Environments
SPECIFICATIONS & FEATURES
Power Quality Devices - Surge Protective Panel Mounts
74000 & 75000 SERIES
• Provides Seven Mode Protection.
• User replaceable modules
• Real-time diagnostics monitor power
and suppression status for each
mode
• Surge magnitude, time, and date is
provided for each surge event
• Surge event history downloadable
for storage via RS-232 connection
• AC Sine Wave Tracking
• Optically isolated dry contacts
• UL 1449 2nd Edition Listed
ENVIRONMENTAL
STORAGE TEMPERATURE
-20C to 85C
OPERATING TEMPERATURE
-10C to 60C
STANDARDS & CERTIFICATIONS
ANSI/IEEE Categories A, B, & C
C-62.41 & C-62.45
UL 1449
#E146315
74120-7M3
CSA
#LR-94773
DESCRIPTION
7-Mode, 3ø WYE, 4-Wire + Ground
7-Mode, 3ø WYE, 4-Wire + Ground
7-Mode, 3ø WYE, 4-Wire + Ground
7-Mode, 3ø WYE, 4-Wire + Ground
CATALOG NO.
VOLTAGE RATING
MODULE NO.
120/208V AC
277/480V AC
120/208V AC
277/480V AC
(7) HC120-M40
(7) HC277-M40
(7) HC120-M53
(7) HC277-M53
3ø WYE (4-Wire + Ground)
74000 & 75000 Series
74120-7M3
74277-7M3
75120-7M3
75277-7M3
Diagnostic Capabilities:
• Monitors the status of each phase
• Display will indicate “Fault”, “Alert”, and “Protection” status.
• Functions include a surge event counter, amplitude measurement,
date and time stamping of the event.
• Events are stored and are recallable and downloadable by the user
Normal Operations:
• Green indicator lights illuminate when the panel status is OK. A fault condition is indicated when up to 3 indicators are no longer illuminated
• Yellow indicator light will illuminate and audible alarm will sound when one of the fuses in the surge module opens due to surge activity
The percentage of protection in that module will flash on the screen (i.e., 75% protection when 1 fuse is open)
• Red indicator light will illuminate and audible alarm will sound when protection level is at 50% or less
• Arrow buttons allow user to view surge event history on each line by scrolling through data
• Information is easily downloadable via RS-232 port using the program “Hyperterminal” that comes standard on any Windows operating software
(see instruction sheet for detailed instructions)
13
For answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
www.leviton.com/powerquality
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 16
Panel Mounted Devices
10 YEAR LIMITED
74000 & 75000 Series - For Industrial & Commercial Environments
CATALOG NO.
MCOV
UL 1449 (2nd Ed) IMPULSE
6kV/500A
L-N
74000 & 75000 Series
L-G
N-G
MAX.SURGE CURRENT in KA
(test w/ 8x20us wave)
NOISE
REJECTION
L-N + L-G = “per Phase”
150V AC
400
400
400
200
200
400
-40 dB
(@ 5K-100MHz)
74277-7M3
320V AC
800
800
800
200
200
400
-40 dB
(@ 5K-100MHz)
75120-7M3
150V AC
400
400
400
320
320
640
20-40 dB
(@ 5K-100MHz)
75277-7M3
320V AC
800
800
800
320
320
640
20-40 dB
(@ 5K-100MHz)
Diagnostic display panel on the 74000 and
75000 Series uses LED display to indicate
“Fault”, “Alert”, and “Protection” status.
75000 Series modules are designed with
four arrester grade MOV's each rated for
80,000 Amps, 8x20us Impulse. Each module is tested to maximum levels of surge
current withstand at an independent laboratory.
Large-diameter MOV's, 40mm on 74000
Series panels and 53mm on the 75000
Series, are individually thermal fused for
over-current protection.
19.71 (500.3mm)
8.33 (211.6mm)
7.48 (190mm)
Power Quality Devices - Surge Protective Panel Mounts
74120-7M3
CATALOG NO. 75120-7M3
120/208 VAC 50/60 HZ
SURGE COUNTER
3 PHASE WYE
15.8 (401mm)
PROTECTION STATUS
Line 1
Fault
Alert
Protection
Line 2
Fault
Alert
Protection
Line 2
Line 3
Fault
Alert
Protection
Line 3
Fault
Alert
Protection
N-G
Line 1
Test
Enter
AUDIO
ALARM
C
US
Reset
74000 & 75000 SERIES
For answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
www.leviton.com/powerquality
14
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 17
Panel Mounted Devices
10 YEAR LIMITED
57000 Series - For Service Entrance or Branch Panels
SPECIFICATIONS & FEATURES
57000 SERIES
• Available with NEMA 12 enclosure
Flush mount collar included with most
units
Power Quality Devices - Surge Protective Panel Mounts
• Dry contacts for remote monitoring
(NO-C-NC)
• Modular design allows for easy
replacement of modules
• Features Sine-Wave Tracking and
Redundant Protection
• UL 1449 2nd Edition Listed
ENVIRONMENTAL
STORAGE TEMPERATURE
-20C to 85C
OPERATING TEMPERATURE
-10C to 60C
FLAMMABILITY
57120-M3
UL 945-V
Flame Retardant Thermoplastic
(Front Bezel)
Type 1
STANDARDS & CERTIFICATIONS
ANSI/IEEE Categories A, B, & C
C-62.41 & C-62.45
UL 1449
#E146315
NEC
200 KAIC Rated per Article 285
CSA
#LR-94773
DESCRIPTION
57120-CM3
Type 12
WITHOUT SURGE COUNTER
WITH SURGE COUNTER
VOLTAGE RATING
3ø WYE (4-Wire + Ground)
57000 Series
57120-CM3
120/208V AC
57120-C3S
120/208V AC
3ø WYE, 4-Wire & Ground
57120-M3
3ø WYE 7-Mode, Integral
Disconnect, 4-Wire & Ground
3ø WYE, 4-Wire & Ground
57120-M3S
3ø Delta, 3-Wire & Ground
3ø WYE, 4-Wire & Ground
57240-DM3
57277-M3
–
57277-CM3
240V AC
277/480V AC
3ø WYE 7-Mode, Integral
Disconnect, 4-Wire & Ground
3ø WYE, 4-Wire & Ground
57277-M3S
57277-C3S
277/480V AC
57346-M3
–
346/600V AC
3ø WYE, 4-Wire & Ground
57347-M3S
–
347/600V AC
3ø Delta, 3-Wire & Ground
3ø Delta, 3-Wire & Ground
57480-DM3
57600-DM3
–
–
480V AC
600V AC
57220-IM3
–
220/380V AC
MODULE NO.
(3) 120
(1) 8120-GN
(3) 120-M3S
(1) 8120-GN
(3) 220
(1) 8250-GN
(3) 7240
(3) 7277
(1) 8320-GN
(3) 7277-M3S
(1) 8320-GN
(3) 7347
(1) 8385-GN
(3) 7346
(1) 8385-GN
(3) 7480
(3) 7600
Replacement Modules for Superior Protection
The heart of the Cat. No. 57000 group is the powerful Replacement Module equipped with
extremely effective hybrid multi-component suppression circuitry. Six different module variants are
available to suit a range of commonly available North American AC line-voltage configurations.
15
For answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
www.leviton.com/powerquality
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 18
Panel Mounted Devices
10 YEAR LIMITED
57000 Series - For Service Entrance or Branch Panels
CATALOG NO.
MCOV
UL 1449 (2nd Ed) IMPULSE
6kV/500A
57000 Series
L-G
N-G
L-N
MAX.SURGE CURRENT in KA
(test w/ 8x20us wave)
L-L
NOISE
REJECTION
L-N + L-G = “per Phase”
150V AC
400
800
400
800
150
–
150
-20 to -40 dB
(@ 5K-10MHz)
57120-M3S
57120-C3S
150V AC
400
500
400
700
100
100
200
-20 to -40 dB
(@ 5K-10MHz)
57220-IM3
250V AC
600
1200
600
1200
150
–
150
-20 to -40 dB
(@ 5K-10MHz)
57240-DM3
250V AC
–
–
–
700
57277-M3
57277-CM3
320V AC
800
1800
800
1800
150
–
150
-20 to -40 dB
(@ 5K-10MHz)
57277-M3S
57277-C3S
320V AC
900
1000
800
1500
100
100
200
-20 to -40 dB
(@ 5K-10MHz)
57346-M3
385V AC
1000
2000
1000
2000
150
–
150
-20 to -40 dB
(@ 5K-10MHz)
57347-M3S
390V AC
1000
1000
1000
2000
100
100
200
-20 to -40 dB
(@ 5K-10MHz)
57480-DM3
550V AC
–
–
–
1500
57600-DM3
680V AC
–
–
–
1800
-20 to -40 dB
(@ 5K-10MHz)
L-L: 150
L-L: 150
-20 to -40 dB
(@ 5K-10MHz)
L-L: 150
-20 to -40 dB
(@ 5K-10MHz)
57000 Series panels Shown with 52000-RS Remote Supervisor, features easy-to-install replaceable modules.
10.31" (261.9 mm)
5.00"
(127.0 mm)
8.02
(203.7 mm)
7.50" (190.5 mm)
6.80
(172.7 mm)
16.00 (406.4 mm)
DANGER
HIGH VOLTAGE
57000 SERIES
For answers to technical questions call our Techline at
1.53
(38.9 mm)
®
57000-M3S
1-800-824-3005 or visit us at:
3.28 (83.3 mm)
4.41 (112.0 mm)
20.00 (508.0 mm)
3.50" (88.9 mm)
14.9" (360.4 mm)
Haute tension
Power Quality Devices - Surge Protective Panel Mounts
57120-M3
57120-CM3
52000-RS
www.leviton.com/powerquality
16
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 19
Panel Mounted Devices
10 YEAR LIMITED
52000 Series - For Industrial & Commercial Environments
SPECIFICATIONS & FEATURES
52000 SERIES
• Available with NEMA 12 enclosure
Flush mount collar included with most
units
• Dry contacts for remote monitoring
Power Quality Devices - Surge Protective Panel Mounts
• Features Sine-Wave Tracking and
Redundant Protection
• UL 1449 2nd Edition Listed
ENVIRONMENTAL
STORAGE TEMPERATURE
-20C to 85C
OPERATING TEMPERATURE
-10C to 60C
FLAMMABILITY
UL 945-V
Flame Retardant Thermoplastic
(Front Bezel)
52120-M3
Type 12
STANDARDS & CERTIFICATIONS
ANSI/IEEE Categories A, B, & C
C-62.41 & C-62.45
UL 1449
#E146315
NEC
200 KAIC Rated per Article 285
CSA
#LR-94773
52120-CM3
Type 12
DESCRIPTION
WITHOUT SURGE COUNTER
WITH SURGE COUNTER
VOLTAGE RATING
MODULE NO.
52000 Series
Single Phase, 2-Wire & Ground
52120-M1
–
120V AC
Single Phase, 3-Wire & Ground
(Home Automation Model)
3ø WYE, 4-Wire & Ground
(Without Enclosure)
3ø WYE (International),
4-Wire & Ground
3ø Delta, 3-Wire & Ground
3ø WYE, 4-Wire & Ground
52120-M2
(52120-M2H)
52120-M3
(52120-B3)
52220-IM3
52120-CM2
120/240V AC
52120-CM3
120/208V AC
52240-DM3
52277-M3
–
52277-CM3
3ø WYE, 4-Wire & Ground
52347-M3
–
347/600V AC
3ø Delta, 3-Wire & Ground
Split Phase Delta,
4-Wire & Ground
52480-DM3
52412-DS3
–
–
480V AC
120/240V AC
–
220/380V AC
240V AC
277/480V AC
(1) 2120
(1) 8120-GN
(2) 2120
(1) 8120-GN
(3) 2120
(1) 8120-GN
(3) 2220
(1) 8250-GN
(3) 2240
(3) 2277
(1) 8320-GN
(3) 2347
(1) 8385-GN
(3) 2480
(2) 2120 (120V) &
(1) 2412 (Hi-Leg)
Remote Supervisor Provides Clear Indication of Protection Status
All Leviton Panel mounted SPD’s are equipped with real-time diagnostics that indicate protection
status. However, when these units are mounted in electrical closets, or other out-of-the-way locations,
a diagnostic alert might not be seen or heard for some time.
The 52000-RS Remote Supervisor can relay protection failure or power interruption warnings from
one or more Leviton panel-mounted SPD’s. Warnings are provided by an optically coupled sensor and
data lines comprising up to 5000 feet of #20 or #22 twisted-pair wiring. One Remote Supervisor can
monitor up to six panel-mounted SPD’s. The Remote Supervisor provides both a visual and audible
alert, which can be silenced at the press of a button. The unit is equipped with a test circuit, and
designed for surface mounting. It draws power from any 120V source through a six-foot line cord.
52000-RS
17
For answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
www.leviton.com/powerquality
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 20
Panel Mounted Devices
10 YEAR LIMITED
52000 Series - For Industrial & Commercial Environments
CATALOG NO.
MCOV
UL 1449 (2nd Ed) IMPULSE
6kV/500A
L-N
52000 Series
L-G
N-G
MAX.SURGE CURRENT in KA
(test w/ 8x20us wave)
L-L
L-N
NOISE
REJECTION
150V AC
400
800
400
–
100
-20 to -40 dB
(@ 5K-10MHz)
52120-M2
52120-CM2
150V AC
400
800
400
800
100
-20 to -40 dB
(@ 5K-10MHz)
52120-M2H
150V AC
400
800
400
800
100
N/A DHC Power
Line Carrier
Compatible
52120-M3 (B3)
52120-CM3
150V AC
400
800
400
800
100
-20 to -40 dB
(@ 5K-10MHz)
52220-IM3
250V AC
600
1200
600
1200
100
-20 to -40 dB
(@ 5K-10MHz)
52240-DM3
L-L: 250V AC
–
–
–
600
100
-20 to -40 dB
(@ 5K-10MHz)
52277-M3
52277-CM3
320V AC
800
1800
800
1800
100
-20 to -40 dB
(@ 5K-10MHz)
52347-M3
420V AC
L-L: 680
900
–
–
900
100
-20 to -40 dB
(@ 5K-10MHz)
52480-DM3
550V AC
–
–
–
1500
100
-20 to -40 dB
(@ 5K-10MHz)
52412-DS3
L-L: 250V AC
400
800
400
800
100
-20 to -40 dB
(@ 5K-10MHz)
10.31" (261.9 mm)
5.00"
(127.0 mm)
7.50" (190.5 mm)
DANGER
1.53
(38.9 mm)
HIGH VOLTAGE
52000-RS
52000 SERIES
For answers to technical questions call our Techline at
3.28 (83.3 mm)
4.41 (112.0 mm)
3.50" (88.9 mm)
14.9" (360.4 mm)
Haute tension
Power Quality Devices - Surge Protective Panel Mounts
52120-M1
1-800-824-3005 or visit us at:
www.leviton.com/powerquality
18
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 21
Infrared Occupancy Sensors
Commercial Grade Wall Switches & Ceiling-Mount Occupancy Sensors
Commercial Grade Wall Switches & Ceiling-Mount
ODS0D-IDW
with 80301-W plate
COLOR
CATALOG NUMBER
Commercial Grade Dual-Relay
Decora® Wall
Ivory
White
Gray
Almond
ODS0D-IDI
ODS0D-IDW
ODS0D-IDG
ODS0D-IDA
COLOR
CATALOG NUMBER
Commercial Grade
Ivory
White
Gray
Almond
COLOR
ODC0S-I1W
ODS15-IDW
with 80301-W plate
DESCRIPTION
RATING
Switch Infrared Occupancy Sensors
Adaptive Dual Relay Occupancy Sensors:
Conference Room Mode Both Primary and
Secondary Relays respond to Ambient
Light Override.
Primary Relay:
Fluorescent: 1200VA @120V, 2700VA @ 277V
Incandescent: 800W @120V
Alternate Setting: Classroom Mode Primary Secondary Relay:
Fluorescent: 800VA @120V, 1200VA 277V
Relay only responds to Ambient Light
Override.
Incandescent: 800W @120V
DESCRIPTION
RATING
Decora® Wall
Switch Infrared Occupancy Sensor (Incandescent and Fluorescent)
ODS10-IDI
Fluorescent: 1200VA @ 120V,
ODS10-IDW
Infrared
2700VA @ 277V
Occupancy Sensors
ODS10-IDG
Incandescent: 800W @ 120V
ODS10-IDA
Motor: 1/4 HP @ 120V
CATALOG NUMBER
DESCRIPTION
RATING
Commercial Grade Decora® Wall Switch Infrared Occupancy Sensor (Incandescent and Fluorescent)
Ivory
ODS15-IDI
Fluorescent: 1800VA @ 120V,
White
ODS15-IDW
Adaptive Infrared
4000VA @ 277V
Occupancy Sensors
Gray
ODS15-IDG
Incandescent: 1800W @ 120V
Almond
ODS15-IDA
Motor: 1/4 HP @ 120V
COLOR
CATALOG NUMBER
DESCRIPTION
Commercial Grade Self-Contained Ceiling-Mount Occupancy Sensors
White
ODC0S-I1W
Self-Contained Ceiling-Mount
(formerly 16786-120)
Infrared Occupancy Sensor
and Switching Relay
COVERAGE
RATING
360°, 530 sq. ft.
Incandescent: 1000W @ 120V
Fluorescent/Inductive:
1000VA @ 120V For 60Hz AC only.
[email protected] AC
White
ODC0S-I2W
Self-Contained Ceiling-Mount
Infrared Occupancy Sensor
and Switching Relay
360°, 530 sq. ft.
Incandescent: 1000W @ 220V
Fluorescent/Inductive:
500VA @ 220V For 50Hz AC only.
White
ODC0S-I7W
(formerly 16786-277)
Self-Contained Ceiling-Mount
Infrared Occupancy Sensor
and Switching Relay
360°, 530 sq. ft.
Fluorescent/Inductive:
2700VA @ 277V For 60Hz AC only.
White
ODCCG-000
Protective Cage
–
–
For the complete line of Occupancy Sensor Products
request the Occupancy Sensors Product Guide (G-7164).
For the complete line of Lighting Controls products,
request the Lighting Controls Product Catalog (G-6960).
19
To learn more about Leviton devices or for answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
www.leviton.com
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 22
Occupancy Sensors
Commercial Grade Multi-Tech and Ultrasonic
ODC10-U0W
Multi-Technology Ceiling-Mount Occupancy Sensor (For use with Leviton Power Pack)
Advanced motion sensors combine infrared and ultrasonic technology for highly accurate monitoring without false triggering. All-digital
self-adjusting technology provides “Install and Forget” solution for automatic lighting control. Low-voltage wiring is used to connect Leviton
Occupancy Sensors to Cat. No. ODP20 Power Pack (purchased separately).
COLOR
CATALOG NUMBER
DESCRIPTION
COVERAGE
OPERATING FREQUENCY
180°, 500 sq. ft.
40kHz
180°, 500 sq. ft.
40kHz
Multi-Tech Ceiling-Mount
Occupancy Sensor
Multi-Tech Ceiling-Mount
Occupancy Sensor with Ambient
Light Override & Secondary Relay
180°, 1000 sq. ft.
32kHz
180°, 1000 sq. ft.
32kHz
Multi-Tech Ceiling-Mount
Occupancy Sensor
Multi-Tech Ceiling-Mount
Occupancy Sensor with Ambient
Light Override & Secondary Relay
360°, 2000 sq. ft.
32kHz
360°, 2000 sq. ft.
32kHz
Commercial Grade Ceiling-Mount Occupancy Sensors
White
ODC05-M0W
Multi-Tech Ceiling-Mount
Occupancy Sensor
Multi-Tech Ceiling-Mount
White
ODC05-MRW
Occupancy Sensor with Ambient
Light Override & Secondary Relay
White
ODC10-M0W
White
ODC10-MRW
White
ODC20-M0W
White
ODC20-MRW
White
ODCRA-000
Hard-Ceiling Raceway Adapter Kit
–
–
White
ODCCG-000
Protective Cage for Ceiling-Mount
Occupancy Sensors
–
–
Ultrasonic Ceiling-Mount Occupancy Sensor (For use with Leviton Power Pack)
Advanced Ultrasonic sensing technology for highly accurate monitoring with excellent immunity to air currents and other interference. All-digital
self-adjusting technology provides “Install and Forget” solution for automatic lighting control. Low-voltage wiring is used to connect Leviton
Occupancy Sensors to Cat. No. ODP20 Power Pack (purchased separately).
COLOR
CATALOG NUMBER
DESCRIPTION
Commercial Grade Ultrasonic Ceiling-Mount Occupancy Sensors
White
ODC05-U0W
Ultrasonic Ceiling-Mount
Occupancy Sensor
COVERAGE
OPERATING FREQUENCY
180°, 500 sq. ft.
40kHz
White
ODC05-URW
Ultrasonic Ceiling-Mount
Occupancy Sensor with Ambient
Light Override & Secondary Relay
180°, 500 sq. ft.
40kHz
White
ODC10-U0W
Ultrasonic Ceiling-Mount
Occupancy Sensor
180°, 1000 sq. ft.
32kHz
White
ODC10-URW
Ultrasonic Ceiling-Mount
Occupancy Sensor with Ambient
Light Override & Secondary Relay
180°, 1000 sq. ft.
32kHz
White
ODC20-U0W
Ultrasonic Ceiling-Mount
Occupancy Sensor
360°, 2000 sq. ft.
32kHz
White
ODC20-URW
Ultrasonic Ceiling-Mount
Occupancy Sensor with Ambient
Light Override & Secondary Relay
360°, 2000 sq. ft.
32kHz
White
ODCRA-000
Hard-Ceiling Raceway Adapter Kit
–
–
White
ODCCG-000
Protective Cage for Ceiling-Mount
Occupancy Sensors
–
–
To learn more about Leviton devices or for answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
www.leviton.com
Commercial Grade Ceiling-Mount Occupancy Sensors
ODC20-M0W
20
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 23
Occupancy Sensors
Commercial Grade Ceiling-Mount & Wall-Mount Occupancy Sensors
Commercial Grade Ultrasonic, Multi-Tech & Infrared
21
ODC04-I0W
ODW12-M0W
ODWWV-I0W
Infrared Ceiling-Mount Occupancy Sensor (For use with Leviton Power Pack)
Includes Advanced Passive Infrared technology for highly accurate monitoring in a variety of commercial applications. All-digital selfadjusting technology provides “Install and Forget” solution for automatic lighting control. Low-voltage wiring is used to connect Leviton
Occupancy Sensors to Cat. No. ODP20 Power Pack (purchased separately).
COLOR
CATALOG NUMBER
DESCRIPTION
COVERAGE
Commercial Grade Infrared Ceiling-Mount Occupancy Sensors
White
ODC04-I0W
Infrared Ceiling-Mount
Occupancy Sensor
Infrared Ceiling-Mount
White
ODC04-IRW
Occupancy Sensor with Ambient
Light Override & Secondary Relay
White
ODCRA-000
Hard-Ceiling Raceway Adapter Kit
White
ODCCG-000
360°, 450 sq. ft.
360°, 450 sq. ft.
–
Protective Cage for Ceiling-Mount
Occupancy Sensors
–
Multi-Technology Wall-Mount Occupancy Sensor (For use with Leviton Power Pack)
Advanced motion sensors combine infrared and ultrasonic technology for highly accurate monitoring without false triggering. All-digital
self-adjusting technology provides “Install and Forget” solution for automatic lighting control. Low-voltage wiring is used to connect Leviton
Occupancy Sensors to Cat. No. ODP20 Power Pack (purchased separately).
COLOR
CATALOG NUMBER
DESCRIPTION
COVERAGE
Commercial Grade Multi-Technology Wall-Mount Occupancy Sensor
White
ODW12-M0W
Multi-Tech Wall-Mount
Occupancy Sensor
White
ODW12-MRW
Multi-Tech Wall-Mount
Occupancy Sensor with Ambient
Light Override & Secondary Relay
OPERATING FREQUENCY
110°, 1200 sq. ft.
32kHz
110°, 1200 sq. ft.
32kHz
Infrared Wide-View and High-Bay Wall Mount Occupancy Sensors (For use with Leviton Power Pack)
Includes Advanced Passive Infrared technology for highly accurate monitoring in a variety of commercial applications. All-digital selfadjusting technology provides “Install and Forget” solution for automatic lighting control. Low-voltage wiring is used to connect Leviton
Occupancy Sensors to Cat. No. ODP20 Power Pack (purchased separately).
COLOR
CATALOG NUMBER
DESCRIPTION
COVERAGE
Commercial Grade Infrared Wide-View Occupancy Sensors
White
ODWWV-I0W
Infrared Wide-View Wall-Mount
Occupancy Sensor
Infrared Wide-View Wall-Mount
White
ODWWV-IRW
Occupancy Sensor with Ambient
Light Override & Secondary Relay
Commercial Grade Infrared High-Bay Occupancy Sensors
White
ODWHB-I0W
Infrared High-Bay Wall-Mount
Occupancy Sensor
Infrared High-Bay Wall-Mount
White
ODWHB-IRW
Occupancy Sensor with Ambient
Light Override & Secondary Relay
To learn more about Leviton devices or for answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
110°, 2500 sq. ft.
110°, 2500 sq. ft.
120 ft, 14 ft. wide
@ 30 ft. height
120 ft, 14 ft. wide
@ 30 ft. height
www.leviton.com
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
B-1027C HealthBrochure.qxd
7/11/06
2:03 PM
Page 24
Six-Outlet Surge Strips
10 YEAR LIMITED
5300 Series - 15A and 20A 120V AC Plug-In Devices
SPECIFICATIONS & FEATURES
5300 SERIES
• Clamping profile tightly tracks AC
sine wave.
• Six protected outlets with ON/OFF
switch.
• Resettable circuit breaker and
internal fusing.
5300-HTS
• Tamper-proof, Hospital Grade
receptacles
ENVIRONMENTAL
STORAGE TEMPERATURE
-35C to 60C
OPERATING TEMPERATURE
-10C to 60C
STANDARDS & CERTIFICATIONS
ANSI/IEEE Categories A & B
C-62.41 & C-62.45
5300-HT2
UL 1449, 1363, 1283
#E146315
5300-PSC
CSA
#LR-94773
DESCRIPTION
CATALOG NO.
APPLICATION
HOUSING
COLOR
5300 Series
6-Outlet w/ Switch, w/ 6’ Cord
6-Outlet w/ Switch, w/ 6’ Cord
6-Outlet w/ Switch, w/ 15’ Cord
6-Outlet w/ Switch, w/ 15’ Cord
6-Outlet w/ Switch, w/ 6’ Cord
6-Outlet w/ Switch, w/ 6’ Cord
6-Outlet w/ Switch, w/ 6’ Cord
6-Outlet w/ Switch, w/ 6’ Cord
Hospital Grade, Tamper-Resistant
6-Outlet w/o Switch, w/ 6’ Cord
Hospital Grade, Tamper-Resistant
6-Outlet w/o Switch, w/ 15’ Cord
6-Outlet w/ Switch, w/ 6’ Cord
Hospital Grade, Tamper-Resistant
6-Outlet w/o Switch, w/ 6’ Cord
5300-PS
5300-GS
5300-S15
5300-G15
5300-PST
5300-GST
5300-PSC
5300-GSC
5300-HTS
5300-H15
5300-IPS
5300-HT2
20 AMP
CATALOG NO.
JOULES
UL 1449 (2nd Ed)
IMPULSE 6kV/500A
5300-PS
1620
L-N: 330V
5300-GS
1620
5300-S15
5300-G15
5300-PST
Data-Sensitive Operations
Data-Sensitive Operations
Data-Sensitive Operations
Data-Sensitive Operations
Telephone/Modem Line Protection
Telephone/Modem Line Protection
CATV Line Surge Protection
CATV Line Surge Protection
Continues to supply power to load
if protection is lost
Continues to supply power to load
if protection is lost
For use in rough environments
Continues to supply power to load
if protection is lost
MAX.SURGE CURRENT
(test w/ 8x20us wave)
Thermoplastic
Thermoplastic
Thermoplastic
Thermoplastic
Thermoplastic
Thermoplastic
Thermoplastic
Thermoplastic
Aluminum
Beige
Gray
Beige
Gray
Beige
Gray
Beige
Gray
Beige
Aluminum
Beige
Aluminum
Aluminum
Beige
Beige
NOISE REJECTION
(@100kHz-100MHZ)
LOW VOLTAGE CLAMPING
(UL 497A/B or UL 452)
5300 Series
L-N: 48KA
-20 to -40 dB
–
L-N: 330V
L-N: 48kA
-20 to -40 dB
–
1620
L-N: 330V
L-N: 48kA
-20 to -40 dB
–
1620
L-N: 330V
L-N: 48kA
-20 to -40 dB
–
1620
L-N: 330V
L-N: 48kA
-20 to -40 dB
270V
5300-GST
1620
L-N: 330V
L-N: 48kA
-20 to -40 dB
270V
5300-PSC
1620
L-N: 330V
L-N: 48kA
-20 to -40 dB
–
5300-GSC
1620
L-N: 330V
L-N: 48kA
-20 to -40 dB
–
5300-HTS
1080
L-N: 400V
L-N: 36kA
-20 to -40 dB
–
5300-H15
1080
L-N: 400V
L-N: 36kA
-20 to -40 dB
–
5300-IPS
1440
L-N: 330V
L-N: 27kA
-20 to -40 dB
–
5300-HT2
1080
L-N: 400V
L-N: 36kA
-20 to -40 dB
–
To learn more about Leviton devices or for answers to technical questions call our Techline at
1-800-824-3005 or visit us at:
www.leviton.com
Power Quality Devices - Six-Outlet Surge Strips
• Leakage current below UL 544
100VA limits
22
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
B-1027C HealthBrochure.qxd
7/11/06
2:02 PM
Page 1
For our complete line of Industrial wiring
device products, request Catalog IPD-2.05.
Leviton Manufacturing Co., Inc.
59-25 Little Neck Parkway, Little Neck, NY 11362-2591
Telephone: 1-800-323-8920 • FAX: 1-800-832-9538
Tech Line (8:30AM-6:00PM E.S.T. Monday-Friday): 1-800-824-3005
Leviton Manufacturing of Canada, Ltd.
165 Hymus Boulevard, Pointe Claire, Quebec H9R 1E9
Telephone: 1-800-469-7890 • FAX: 1-800-563-1853
Leviton S.A. de C.V.
General Arista 54-A Col. Argentina, Mexico D.F., C.P. 11270
Telephone: 011-525-386-1131, 011-525-386-2052 • FAX: 011-525-386-1797
Visit us on the web at: www.leviton.com
© Copyright 2006 Leviton Manufacturing Co., Inc. All rights reserved.
B-1027C/F6-tp
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement