Aruba 100 Series Access Point Data Sheet »

Aruba 100 Series Access Point Data Sheet »
Aruba 100 Series Access Points
Aruba Data Sheet
ARUBA 100 SERIES ACCESS POINTS
For high-density Wi-Fi client environments
CHOOSE YOUR OPERATING MODE
The 100 series of APs offers a choice of operating modes to meet
your unique management and deployment requirements.
Multifunctional and affordable 100 series wireless access
points (APs) deliver enterprise-grade Wi-Fi to high-density
client environments in offices, hospitals, schools, retail stores
and warehouses.
These high-performance 802.11n APs deliver wireless data rates
up to 300 Mbps per radio and ensure peak performance by
utilizing channel bonding, block acknowledgement and MIMO
radios. Advanced antenna technology also increases RF signal
range and reliability.
The 105 series of APs features two dual-band 2.4-GHz and
5-GHz radios with 2x2 MIMO and four integrated omni-directional
downtilt antennas, making it ideal for warehouses and high-ceiling
deployments. The 104 series features the same radios with
external antenna connectors.
WI-FI CLIENT OPTIMIZATION
To eliminate sticky client behavior, every Aruba AP comes with
ClientMatch™ technology, which continuously gathers session
performance metrics and utilizes this data to steer mobile devices
to the best AP and radio on the WLAN, even while users roam.
BEST-IN-CLASS RF MANAGEMENT
All Aruba APs include Adaptive Radio Management™ technology,
which is essential to creating the most reliable, high-performance
WLANs. ARM™ manages the 2.4-GHz and 5-GHz radio bands to
optimize Wi-Fi client performance and ensures that APs stay clear
of RF interference.
The 100 series can be configured to provide part-time or
dedicated air monitoring for spectrum analysis and wireless
intrusion protection, VPN tunnels to extend remote locations
to corporate resources, and wireless mesh connections where
Ethernet drops are not available.
• Controller-managed mode. When managed by Aruba Mobility
Controllers, 100 series APs offer centralized configuration, data
encryption, policy enforcement and network services, as well as
distributed and centralized traffic forwarding. Please refer to the
Aruba Mobility Controller data sheets for more details.
• Aruba Instant™ mode. In Aruba Instant mode, a single AP
automatically distributes the network configuration to other
Instant APs in the WLAN. Simply power-up one Instant AP,
configure it over the air, and plug in the other APs – the entire
process takes about five minutes.
For large installations across multiple sites, the Aruba Activate™
service significantly reduces deployment time by automating device
provisioning, firmware upgrades, and inventory management. With
Aruba Activate, Instant APs are factory-shipped to any site and
configure themselves when powered up.
If WLAN and network requirements change, a built-in migration
path allows 100 series Instant APs to become part of a WLAN that
is centrally managed by a Mobility Controller.
ADVANCED FEATURES
• Spectrum Analysis:
-- Spectrum analyzer remotely scans the 2.4-GHz and 5-GHz
radio bands to identify sources of RF interference.
• Security:
-- With an OpenDNS service subscription, Aruba Instant delivers
integrated web filtering, malware and botnet protection to
every device connected to the WLAN
-- Integrated Trusted Platform Module (TPM) for secure storage
of credentials and keys
-- SecureJack-capable for secure tunneling of wired Ethernet traffic
Operating Modes
• 802.11a/b/g/n Aruba Instant AP
• 802.11a/b/g/n Mobility Controller-managed AP
• Air monitor (AM)
• Secure enterprise mesh
• Remote AP (RAP) when used with a Mobility Controller
Wireless Radio Specifications
• AP type: Dual-radio, dual-band 802.11n indoor
• Software-configurable dual radio supports 2.4 GHz and 5 GHz
• 2x2 MIMO 802.11n with two spatial streams and up to
300 Mbps per radio
Aruba 100 Series Access Points
• Supported frequency bands (country-specific restrictions apply):
-- 2.400 to 2.4835 GHz
-- 5.150 to 5.250 GHz
-- 5.250 to 5.350 GHz
-- 5.470 to 5.725 GHz
-- 5.725 to 5.875 GHz
• Available channels: Dependent upon configured regulatory domain
• Controller-managed, dependent upon configured regulatory domain
• Dynamic frequency selection (DFS) optimizes the use of
available RF spectrum
• Supported radio technologies:
-- 802.11b: Direct-sequence spread-spectrum (DSSS)
-- 802.11a/g/n: Orthogonal frequency division multiplexing (OFDM)
-- 802.11n: 2x2 MIMO with two spatial streams
• Supported modulation types:
-- 802.11b: BPSK, QPSK, CCK
-- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
• Transmit power: Configurable in increments of 0.5 dBm
• Maximum transmit power:
-- 2.4 GHz: 23 dBm (limited by local regulatory requirements)
-- 5 GHz: 23 dBm (limited by local regulatory requirements)
• Maximum ratio combining (MRC) for improved receiver performance
• Cyclic delay diversity for improved downlink RF performance
• Space-Time Block Coding (STBC) for increased range and
improved reception
• Association rates (Mbps):
-- 802.11b: 1, 2, 5.5, 11
-- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
-- 802.11n: MCS0 to MCS15 (6.5 Mbps to 300 Mbps)
• 802.11n high-throughput (HT) support: HT 20/40
• 802.11n packet aggregation: A-MPDU, A-MSDU
Power
• 48 volts DC 802.3af power over Ethernet (PoE)
• 12 volts DC for external AC supplied power (adapter sold separately)
• Maximum power consumption: 12.5 watts
Antenna
• RF interconnect attenuation (between radio and connectors or
antennas): 0.5 dB
• AP-104 and IAP-104: Four RP-SMA connectors for external
single-band antennas
• AP-105 and IAP-105: Four integrated downtilt omni-directional
antennas for 2x2 MIMO with maximum antenna gain of 3.0 dBi
in 2.4 GHz and 4.5 dBi in 5 GHz
Interfaces
• Network: One 10/100/1000BASE-T Ethernet (RJ-45),
auto-sensing link speed and MDI/MDX
• Power: One DC power connector
• Other: One RJ-45 console interface
Mounting
• Included with AP:
-- Molded mounting tabs for attaching to 15/16” T-bar
drop-tile ceiling
-- Slotted tabs for screw mounting to a wall, ceiling or other
flat surface
Aruba Data Sheet
• Optional mounting kits:
-- AP-105-MNT: Aruba 100 series AP mount kit contains one
flat-surface wall/ceiling secure mount cradle and one wall-box
secure mount cradle.
-- AP-105-MNT-DC: Aruba 100 series AP mount kit contains
one flat-surface wall/ceiling secure mount cradle and one
wall-box secure mount cradle. Both cradles are modified to
allow access to AP DC power interface.
-- AP-105-MNT-C: Aruba 100 series AP mount kit contains two
ceiling-grid rail adapters for 9/16” and 15/16” flat rails.
Mechanical
• Dimensions/weight (unit):
-- 132 mm x 135 mm x 45 mm (5.2” x 5.3” x 1.8“)
-- 0.3 kg (.66 lb)
• Dimensions/weight (shipping):
-- 195 mm x 170 mm x 55 mm (7.7” x 6.7” x 2.2“)
-- 0.44 kg (.97 lb)
Environmental
• Operating:
-- Temperature: 0° C to 50° C (+32° F to +122° F)
-- Humidity: 5% to 95% non-condensing
• Storage and transportation temperature range:
-- Temperature: -40° C to +70° C (-40° F to +158° F)
Regulatory
• FCC/Industry of Canada
• CE Marked
• R&TTE Directive 1995/5/EC
• Low Voltage Directive 72/23/EEC
• EN 300 328
• EN 301 489
• EN 301 893
• UL/IEC/EN 60950
• EN 60601-1-1, EN60601-1-2
For more country-specific regulatory information and approvals,
please see your Aruba representative.
Certifications
• CB Scheme Safety, cTUVus
• UL2043 plenum rating
• Wi-Fi certified 802.11a/b/g/n
Warranty
• Limited lifetime warranty
Minimum ArubaOS Version
• AP-104: ArubaOS 6.1.3.0 on an Aruba Mobility Controller
• AP-105: ArubaOS 3.4.1.0 on an Aruba Mobility Controller
• Aruba Instant 2.0.0.3 software
Aruba 100 Series Access Points
Aruba Data Sheet
100 series ap RF PERFORMANCE TABLE
Max transmit power
per active transmit
chain (dBm)
Receive sensitivity
(dBm)
Max transmit power
per active transmit
chain (dBm)
2.4 GHz
Receive sensitivity
(dBm)
5 GHz
802.11b
1 Mbps
2 Mbps
5.5 Mbps
11 Mbps
20
20
20
20
-96
-96
-94
-93
–
–
–
–
–
–
–
–
20
20
20
20
20
19
18
17
-96
-96
-96
-95
-92
-89
-85
-83
20
20
20
20
20
19
18
17
-96
-96
-96
-95
-91
-88
-84
-83
20
20
20
20
19
18
17
15
20
20
20
20
19
18
17
15
-96
-95
-93
-90
-87
-82
-81
-80
-95
-93
-91
-87
-84
-81
-80
-77
20
20
20
20
19
18
17
15
20
20
20
20
19
18
17
15
-96
-94
-92
-89
-86
-82
-80
-79
-95
-92
-90
-87
-84
-80
-78
-77
20
20
20
20
19
18
17
15
20
20
20
20
19
18
17
15
-93
-93
-90
-86
-83
-79
-77
-76
-92
-89
-87
-84
-82
-76
-76
-73
20
20
20
20
19
18
17
15
20
20
20
20
19
18
17
15
-92
-92
-89
-86
-83
-80
-77
-76
-92
-90
-87
-84
-81
-77
-75
-73
802.11a/g
6 Mbps
9 Mbps
12 Mbps
18 Mbps
24 Mbps
36 Mbps
48 Mbps
54 Mbps
802.11n HT20
MCS0
MCS1
MCS2
MCS3
MCS4
MCS5
MCS6
MCS7
MCS8
MCS9
MCS10
MCS11
MCS12
MCS13
MCS14
MCS15
802.11n HT40
MCS0
MCS1
MCS2
MCS3
MCS4
MCS5
MCS6
MCS7
MCS8
MCS9
MCS10
MCS11
MCS12
MCS13
MCS14
MCS15
Maximum capability of the hardware provided. Maximum transmit power is limited by local regulatory settings.
Aruba 100 Series Access Points
Aruba Data Sheet
IAP-105 and ap-105 Antenna Pattern Plots
Z
Y
Y
X
2.45 GHz
332
338
343
349 354
326
0
6
5
11
17
23
28
34
0
321
315
-29
39
51
287
56
Y
264
-30
103
109
114
-120
120
-126
129
203
197
191 186
174 169
180
163
158
131
-137
-143
141
146
208
126
-131
135
214
137
143
-149
152
Horizontal (azimuth) plane
5.5 GHz
332
338
343
349 354
326
0
6
5
11
17
23
321
315
-29
34
39
45
287
Y
79
84
X
-30
90
264
96
101
259
107
253
113
248
242
118
236
124
231
129
135
225
141
219
214
146
208
203
197
191 186
180
174 169
163
158
152
Horizontal (azimuth) plane
-6
0
6
5
11
17
23
29
34
40
46
-5
51
-10
57
Z
63
-15
-69
73
281
270
-11
0
-63
68
-20
276
-17
-57
62
-25
160
166
177 171
149
-51
56
-15
293
-23
-46
51
-10
-166 -171
-177
154
-40
309
298
-160
-34
-5
304
-154
Vertical (elevation) plane
28
0
91
-114
118
225
86
97
124
231
80
Y
-109
113
242
74
-25
-103
107
248
69
-97
101
253
63
-20
-91
96
259
57
Z
-86
90
236
46
-15
-80
84
X
219
29
51
-74
79
-30
23
34
-10
-69
73
281
270
17
40
-63
68
-20
276
11
-5
-57
62
-25
6
5
-51
-15
293
0
-6
0
-46
309
-10
-11
-40
45
298
-17
-34
-5
304
-23
69
-20
-74
-80
74
80
-25
Y
-86
-30
-91
86
91
-97
97
-103
103
-109
109
-114
114
-120
120
-126
126
-131
131
-137
-143
137
143
-149
-154
-160
-166 -171
-177
166
177 171
160
154
149
Vertical (elevation) plane
Aruba 100 Series Access Points
Aruba Data Sheet
Ordering Information
Part Number
Detscription
IAP-105
IAP-105-US
IAP-105-IL
IAP-105-JP
AP-105
AP-105-1
AP-105-F1
AP-105-MNT
AP-105-MNT-C
AP-105-MNT-C2
AP-105-MNT-DC
IAP-104
IAP-104-US
IAP-104-IL
IAP-104-JP
AP-104
AP-104-F1
AP-AC-UN
AP-AC-12V18
Aruba Instant 105 wireless AP, 802.11a/b/g/n, 2x2:2, dual radio, integrated antennas. Unrestricted regulatory domain. These
products should be considered rest-of-world products and must not be deployed in the United States, Japan or Israel.
Aruba Instant 105 wireless AP, 802.11a/b/g/n, 2x2:2, dual radio, integrated antennas. Restricted regulatory domain – US
Aruba Instant 105 wireless AP, 802.11a/b/g/n, 2x2:2, dual radio, integrated antennas. Restricted regulatory domain – IL
Aruba Instant 105 wireless AP, 802.11a/b/g/n, 2x2:2, dual radio, integrated antennas. Restricted regulatory domain – JP
Aruba 105 wireless AP, 802.11a/b/g/n, 2x2:2, dual radio, integrated antennas
Aruba 105 wireless AP, TAA compliant
Aruba 105 wireless AP, FIPS/TAA
Aruba 100 series AP mount kit contains one flat-surface wall/ceiling secure mount cradle and one wall-box secure mount cradle.
Aruba 100 series AP mount kit contains two ceiling-grid rail adapters for 9/16” and 15/16” flat rails.
Aruba 100 Series Access Point Mount Kit (ceiling grid). Contains 2x ceiling grid rail adapters (for Interlude and Silhouette style rails).
Aruba 100 series AP mount kit contains one flat-surface wall/ceiling secure mount cradle and one wall-box secure mount cradle.
Both cradles are modified to allow access to AP DC power interface.
Aruba Instant 104 wireless AP, 802.11a/b/g/n, dual band, dual radio, external antenna connectors. Unrestricted regulatory domain. These products should be considered rest-of-world products and must not be deployed in the United States, Japan
or Israel.
Aruba Instant 104 wireless AP, 802.11a/b/g/n, dual band, dual radio, external antenna connectors. Restricted regulatory
domain: United States
Aruba Instant 104 wireless AP, 802.11a/b/g/n, dual band, dual radio, external antenna connectors. Restricted regulatory
domain: Israel
Aruba Instant 104 wireless AP, 802.11a/b/g/n, dual band, dual radio, external antenna connectors. Restricted regulatory
domain: Japan
Aruba 104 wireless AP, 802.11a/b/g/n 2x2:2, dual radio, antenna connectors.
Aruba 104 wireless AP, FIPS/TAA
12-volt DC universal AC power adapter kit – North America, Japan, United Kingdom, Italy, EC (Europlug), Australia, China,
India, Korea
12-volt DC/18-watt AC power adapter. Does not include country specific power cord
www.arubanetworks.com
1344 Crossman Avenue. Sunnyvale, CA 94089
1-866-55-ARUBA | Tel. +1 408.227.4500 | Fax. +1 408.227.4550 | info@arubanetworks.com
© 2013 Aruba Networks, Inc. Aruba Networks’ trademarks include AirWave®, Aruba Networks®, Aruba Wireless Networks®, the registered Aruba the Mobile Edge Company logo, Aruba Mobility
Management System®, Mobile Edge Architecture®, People Move. Networks Must Follow®, RFProtect®, and Green Island®. All rights reserved. All other trademarks are the property of their respective
owners. DS_AP100Series_050713
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising