Spec Tear Sheet
EXTRA-LARGE CAPACITY
COMMERCIAL Dryer
Featuring Microprocessor Controls
Large 6.7-cu.-ft. drum capacity
• Ideal for Handling Large-Size Loads
• Allows large loads to tumble and spread,
helping to reduce dry time.
Industrial grade cabinet
• Top with Integrated Backsplash
• Resists Chipping and Scratching
MICROPROCESSOR CONTROLS
• Time Remaining Display
• Front Controls for Ease-of-Use
High velocity airflow system
• Whirlpool® Commercial dryer’s blower system
provides optimal air velocity for efficient and
versatile installation. You can now vent up to
100 ft. with three elbows, and one angled
hood for versatility.
CED9060AW—27" Non-Metered Electric Dryer
CGD9060AW—27" Non-Metered Gas Dryer
• Four Roller Suspension with
Permanently Lubricated Bearings
• Push-Button Controls
• Large Lint Screen (84 Sq. In.)
• Blower Guard Reduces Service Calls
• Front Control Panel 22° Angle
• Reversible Door with Heavy-Duty
Die-Cast Hinges
• Front Service Accessibility
• Electric Heating Element at
5600 Watts 240-Volt
WCL14018_CEDGD9050AWSpec.indd 1
• Gas Model Features a 24K
BTU Burner
• Motor: 1/3-HP with Built-In
Overload Protector; Centrifugal
Switch Turns Off Heating Element
in the Event of a Broken Belt
• 4-Way Venting from Left or Right
Side, Back or Bottom
• 2-Year Limited Parts Only
Warranty/90-Day Labor*
*Call 1-800-NO-BELTS (800-662-3587)
for warranty details.
1/22/15 2:04 PM
EXTRA-LARGE CAPACITY
COMMERCIAL Dryer
Featuring Microprocessor Controls
Whirlpool® Extra-Large Capacity Commercial Dryer
dryer SPECIFICATIONS
Models
Motor
Single-phase, thermoprotected against overload,
auto-reset
HP (kw)
CAPACITY
Cu. ft. (liters)
door opening DIAMETER
In. (mm )
AIRFLOW
Gas models — cfm (cmm)
Electric models — cfm (cmm)
Tumble speed — RPM
ELECTRICAL REQUIREMENTS
CED model — Voltage
CGD model — Voltage
BREAKER/FUSE REQUIREMENTS
CED model — Amps
CGD model — Amps
EXHAUST DUCT DIAMETER
In. (mm)
electronic BURNER ignition
CGD model
heating element RATING
CGD model — BTU/hr. (kcal/hr.)
CED model — Electric heating element – watts
GAS INLET
CGD model — in.
ADJUSTABLE LEVELING LEGS
Approximate weight
Crated — lbs. (kg)
Uncrated — lbs. (kg)
dimensions
Width — in. (mm)
Depth — in. (mm)
Height — in. (mm)
CED9060AW/CGD9060AW
1/3 (.25)
6.7 (190)
18.25 (464)
230 (6.5)
215 (6.1)
50 ± 1
240V/60Hz
120V/60Hz
Dimensions are for planning purposes only.
See Whirlpool® Installation Instructions for full details.
Maximum EXHAUST DUCT length
PER NUMBER OF TURNS
30
15
4 (100)*
Number Of
90° Turns
Yes
24,000 (6,048)
5,600
3/8 N.P.T.
Yes
144 (65)
133 (60)
27 (686)
29 (737)
39.25 (997)
0
1
2
3
4
Rigid Metal Vent
Box Hood and Louvered Style
135 ft. ( 41.2 m)
125 ft. (38.1 m)
115 ft. (35.1 m)
106 ft. (32.3 m)
98 ft. (29.9 m)
0
1
2
3
4
Flexible Metal Vent
Box Hood and Angled Hood
Louvered Style
Style
76 ft. (23.2 m)
62 ft. (18.9 m)
71 ft. (21.6 m)
57 ft. (17.4 m)
67 ft. (20.4 m)
53 ft. (16.2 m)
65 ft. (19.8 m)
51 ft. (15.6 m)
63 ft. (19.2 m)
49 ft. (14.9 m)
Angled Hood
Style
129 ft. (39.3 m)
119 ft. (36.3 m)
109 ft. (33.2 m)
100 ft. (30.5 m)
92 ft. (28.0 m)
*Use a 4" (100mm) diameter rigid aluminum or galvanized steel duct. Never use plastic, nonmetal or
combustible duct.
See specific instructions for proper installation. Because of continuous product improvement, Whirlpool
reserves the right to change specifications without notice.
Power cords on electric models sold separately.
LP Conversion Kit #W10402145 Pedestal Single Box Kit #WHP0400VW Pedestal Pack of 10 Kit #WHP0401VW
2-YEAR LIMITED parts
ONLY WARRANTY
For the first two years from the date of purchase,
when this major appliance is installed, maintained
and operated according to the instructions attached
to or furnished with the product, Whirlpool will pay
for factory-specified replacement parts to correct
defects in materials or workmanship that existed
when this commercial appliance was purchased.
See warranty for complete details.
To Locate a Distributor Near You, Please Visit www.whirlpoolcommerciallaundry.com/distributor, or Call 1-800-NO-BELTS.
®/™ ©2015 Whirlpool. All rights reserved.
Whirlpool Corporation • Benton Harbor, Michigan 49022 U.S.A. WCL14018_CEDGD9050AWSpec.indd 2
WY140244 1/15
1/22/15 2:04 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising