Ricoh | Aficio LP335c | Bulletin 3

TECHNICAL SERVICE BULLETIN
BULLETIN NUMBER:
G130/G131 - 002
10/06/2005
APPLICABLE MODEL:
GESTETNER – C7528n/C7535n
LANIER – LP332c/LP335c
RICOH – AFICIO CL7200/CL7300
SAVIN – CLP128/CLP135
SUBJECT:
SERVICE MANUAL - INSERT
The Service Manual pages listed below must be replaced with the pages supplied.
The revised areas have been highlighted by an arrow ⇒.
„
•
5-46
Updated Information (Engine Service Mode)
•
5-58
Updated Information (Engine Service Mode)
Copyright  2005 RICOH Corporation. All rights reserved.
www .ricohuniversity.com
SERVICE
MANUAL
PAGES:
Page 1 of 1
ENGINE SERVICE MODE
Rev. 10/2005
SP5-XXX (Mode)
5024
*CTL 0: mm (Europe/Asia), 1: inch (USA)
[mm/inch Display]
Display units (mm or inch) for custom paper sizes.
5045
*CTL [0 or 1 / 1 / -]
0: Developments, 1: Prints
Selects the counting method if the meter charge mode is enabled with SP5-930001. You can change the setting only one time.
[Counter Method]
[Toner Refill Displ] Toner Refill Detection Display
Enables or disables the toner refill detection display.
5051 1 Toner Refill Displ
*CTL [ 0 or 1 / 0 /- ]
0: enable
1: disable
5051
⇒
5055
5055 1
*CTL 0: NO, 1: Yes
[Display IP Address]
Displays the LP’s IP Address on the display panel. (Default = NO)
5104
*CTL [0 to 2 / 0 / 1 /step]
0: No, 1: YES, 2: Yes except By-pass
Specifies whether the counter is double clicked for A3/DLT size prints.
5131
*BCU
[Paper Size]
• DOM: Japan
• USA: North America
• ERP: Europe
The default setting changes for each area.
5150
[Bypass Length Setting]
5179
*CTL [0 or 1 / 0 / -]
0: OFF, 1: ON (displays error message)
Enables or disables the alert function for the paper feed misdirection at the by-pass
printing. This function shows an error message when a paper jam occurs because
the paper feed direction is different from the one that has been set with UP mode.
5302
*CTL# [-1440 to 1440 / 60 / 1 min./step] Not used
[Set Time]
Adjusts the RTC (real time clock) time setting for the local time zone.
Examples: For Japan (+9 GMT), enter 540 (9 hours x 60 min.)
NA :-300 (Montreal)
EU :+ 60 (Paris)
CH :+480 (Beijing)
TW :+480 (Taipei)
AS :+480 (Hong Kong)
G130/G131
[Double Count]
*CTL [0 or 1 / 0 / -] Alphanumeric
0: OFF, 1: ON
Lets or does not let the by-pass tray feed extra long paper (up to 1260 mm).
[Print By-pass]
5-46
SM
ENGINE SERVICE MODE
5866
Rev. 10/2005
*CTL [0 to 1 / 0 / 1/step]
0: Not attached, 1: Attached
Attaches or does not attach the data field to the header of alert e-mail.
[Mail: Date Field]
5869
[RAM Disk Setting]
5869 001 Mail Function
*CTL#
[0 to 1 / 0 / 1/step]
0: ON, 1: OFF
Enables or disables the e-mail transfer function. This SP sets the RAM disk size for
the e-mail transfer function.
5870
[Common Key Info Writing]
5870 001 Writing
*CTL Writes the authentication data (used for NRS) in
the memory.
5870 003 Initialize
*CTL Initializes the authentication data (used for NRS)
in the memory.
5873
[SD Card Appli Move]
5873 001 Move Exec
5873 002 Undo Exec
⇒
( 5.5)
5876
5876 010
[Security Clear]
Clear WS
5886
5886 1
*CTL 0: YES, 1: No
[ROM Update]
Enables/Disables firmware updates. (Default = Yes)
Clears the Net File area security data.
DFU
[Plug/Play] Plug & Play Name Selection
5907
5907 001 Plug/Play
*BCU Specifies the manufacturer and model name.
[0 to 11 / 0 / 1/step] FA
0
1
2
3
4
5
6
7
8
9
10
11
G130/G131
5-58
MF
Ricoh
Ricoh
Savin
Savin
Gestetner
Gestetner
NRG
NRG
Infotec
Infotec
Lanier
Lanier
Model Name
Aficio CL7200
Aficio CL7300
CLP128
CLP135
C7528n
C7535n
C7528n
C7535hdn
IPC 2832
IPC 3535e
LP332c
LP335c
NetBeui
Aficio CL7200
Aficio CL7300
CLP128
CLP135
C7528n
C7535n
C7528n
C7535hdn
IPC 2832
IPC 3535e
LP332c
LP335c
SM
Download PDF