Floor Boxes Complete Catalog

Floor Boxes Complete Catalog
Floor Boxes
Table of Contents
Floor Boxes Selection Guide.................................................................. C2
Poke-Through and AFM Selection Guide............................................... C3
Floor Boxes..................................................................................... C4–C5
Flush Service Floor Boxes...............................C6–C9, C16–C37, C44–C45
Residential Floor Boxes............................................................... C10–C11
Rectangular Floor Boxes............................................................. C12–C13
Rectangular Floor Box Covers Nonmetallic.......................................... C14
Rectangular Floor Box Covers Brass and Stainless Steel..................... C15
Round Floor Boxes...................................................................... C38–C41
Recessed Service Floor Boxes.................................................... C42–C43
Concealed Service Floor Boxes................................................... C46–C59
Poke-Through Systems............................................................... C60–C61
Modular Poke-Through System........................................................... C62
Flush Power and Communications...................................... C63–C67, C72
Furniture Feed............................................................................ C68–C70
Above-Floor Pedestal.......................................................................... C71
Access Floor Modules................................................................. C73–C83
Above-Floor Service Fittings............................................................... C84
Recessed Service Floor Fittings.......................................................... C85
Keystone / Data Accessories............................................................... C86
Replacement Parts and Accessories............................................ C87–C88
Floor Box Selection Chart............................................................ C89–C90
Floor Box Cover Selection Chart.......................................................... C91
w w w. t nb. c a
C1
Floor Boxes
Floor Boxes Selection Guide
Flush Service Floor Boxes – Outlets at Floor Level
600 Series
68 Series
68HP Series
Round, Cast Iron
Round, Stamped Steel
• Tile flange included
• P60 Series Carpet flanges
• P60 Series Covers
• Tile flange included
• P60 Series Carpet flanges
• P60 Series Covers
(see pages C17 to C19)
Round PVC Floor Box
• 4 Power, 6 Data
• 3 Compartments 1-1/2 in. and
1 in. in-line hubs
• Slide latch cover — No tools
required
• Lids lay flat on the floor
while-in-use
• Solid brass or aluminum cover
(see pages C16 to C19)
(see pages C32 to C33)
640 Series
& 840 Series
740 Series
640P Series
Rectangular, Stamped Steel
Rectangular, Nonmetallic
Rectangular, Cast Iron
• 640P Series Tile & Carpet flanges
• P64 Series Covers
• Up to 3-gang
• 640P Series Tile & Carpet flanges
• P64 Series Covers
• Up to 3-gang
• Tile flanges included
• P64 Series Carpet flanges
• P64 Series Covers
• Up to 2 in. conduit
• Up to 4-gang
(see pages C28 to C31)
61W
60 Series
Rectangular, Stamped Steel
• For wood sub-floors
• P64 Series Carpet flanges
• P64 Series Covers
(see pages C24 to C26)
62W
(see pages C6 to C8)
(see pages C44 to C44)
Concealed Service Floor Boxes – Outlets Below Floor Level
663 Series
664 Series
2 Compartments
2 Compartments
• P62-TAR adjusting ring & tile flange
• P60 Series Carpet flanges
• P60-3B & P62 Series Covers
• 664 Series Covers (tile & carpet)
• 664-CI: Cast iron
• 664-S: Shallow 2-7/8 in. height
663-SC
664-S
664-SC
664-CI
(see pages C48 to C50)
(see pages C46 to C47)
665 Series
668 Series
667 Series
4 Compartments
4 Compartments
4 Compartments
• 665 Series Covers
(tile & carpet)
• 665-CI: Cast iron
• 668 Series Covers
(tile & carpet)
• 668 Series Tile flanges
• Shallow 2-1/2 in. height
• 667 Series Covers
(tile & carpet)
• 1 Compartment =
2 Gangs
665-CI
665-SC
C2
(see pages C51 to C55)
667-SC
668-S
(see pages C58 to C59)
(see pages C56 to C57)
w w w.t nb.c a
Floor Boxes
Poke-Through and AFM Selection Guide
Poke-Through Systems
Flush Service
(see pages C62 to C65)
Furniture Feed
(see page C66)
(see page C67)
(see page C68)
(see page C70)
(see page C69)
FPT4 Series
FPT3 Series
FPT Series
FFPT4 Series
FFPT3 Series
FPT Series
• 4 in. Core drill diameter
• 4 Power + 4
communication outlets
• Also 2 power + 6 or
8 communication outlets
• Brass or aluminum
cover
• 3 in. Core drill diameter
• Duplex receptacle + 2
communication outlets
• Brass or aluminum
cover
• 3 in. Core drill diameter
• Duplex receptacle
• Brass, aluminum or nonmetallic cover
• 4 in. Core drill diameter
• 3/4 in. Hub for power
& 1-1/4 in. Hub for
communication
• Brass or aluminum cover
• 3 in. Core drill diameter
• Concentric 2 in. &
1-1/4 in. Hubs for power or communication
• Brass or aluminum cover
• 3 in. Core drill
diameter
• (2) 1/2 in. Hubs &
(1) 3/4 in. Hub for power and/or
communication
• Nonmetallic cover
Access Floor Modules (AFM) for Raised Floors
AFM-2 Series
AFM-4 Series
AFM-6 Series
AFM-6
• 3 Compartments
(see pages C74 – C75)
• 2 Compartments
(see pages C76 – C77)
• 3 Compartments
AFM-6S2
• 4 Compartments
• 2-1/2 in. depth for
shallow raised floors
AFM-6V
• 3 Compartments
• Accepts standard wall
plates for data jacks
(see pages C78 to C81)
AFM-8
Series
GAB Series
• GAB-8: Stamped steel
• For use with AFM-8
in concrete applications
• 10 Compartments
(see page C82)
w w w. t nb. c a
(see page C83)
GAB-8
C3
Floor Boxes
Floor Boxes Systems
840, 640 Series —
Flush Multiple Service
665-SC
The aesthetic and technical needs of today’s buildings are as
diverse as the equipment that fills them. Small wonder, then, that
floor boxes can continue to solve the needs of today and the future
as they did in the early 1900’s when they were invented.
They are still a contemporary, capable and cost-effective wire
management system. Steel City®, a pioneer in both the design and
applications of floor boxes since 1904, invites you to discover,
or rediscover, the possibilities.
Three Levels of Service
Concealed Service
P60 Series — Power Application
All power, communications and data devices
are hidden below the finished floor level.
664 Series
Flush Service
P60 Series — Communication/Data Application
All power devices are mounted at the finished
floor level.
Housing
Receptacle
Nipple
Cover Plate
600 Series
Floor Box
Above Floor Service
All power devices are mounted in a service
fitting head above the finished floor.
SFH-40 Series
Multiple Service Capabilities: Power, Communication and Data in One Unit
665-SC
C4
AFM-6
665-SC
w w w.t nb.c a
Floor Boxes
Building Design Flexibility
Floor Boxes Designed for the Following Applications:
664-SC
664-S
664-CI
Slab on Grade
Steel Deck with
Concrete Pour
Slab on Grade
Steel Deck with
Concrete Pour
Two Pour
Concrete
61-W
62-W
63-W
672
Wood Floor
Wood Floor
Wood Floor
Wood Floor
New Construction or Retrofit Applications
71W Series
(complete kit)
w w w. t nb. c a
C5
Floor Boxes
Flush Service Floor Boxes
60W Series Floor Boxes
For Wood Subfloors!
Steel City® 60W Series Floor Boxes provide single – and
multi-gang solutions for wood subfloor applications.
•NEW! Three-gang configuration for high-capacity,
multi-service installations.
62W
61W
•NEW! Larger KOs (3/4 in. & 1 in.) have been added to each gang for application flexibility.
•Adjustable mounting brackets allow for various finished
floor-material heights (hardwoods, tile or carpet).
63W
New Construction
Retrofit Construction (Old Work)
Telephone Cable
and Plug
P64 Series
Carpet Plate 62W Floor
Box
Power Cord
and Plug
61W Floor Box
Mounting
Bracket Subfloor
5-5/16 in.
Mounting Bracket
A
A
C6
Subfloor
60W Series Floor Boxes
Cat. No.
2-13/16 in.
Power Cord and Plug
Carpeted Floor
Carpet Plate
Cover Plate
P64 Series
Covers Hardwood
Finished Floor
Trade Size (in.)
Capacity
61W
1-Gang Floor Box 3-11/16 in.
Ends: (2) 1/2 in., (2) 3/4 in. Bottom: (1) 1/2 in., (1) 1 in.
31 cu. in.
62W
2-Gang Floor Box 7-1/16 in.
Ends: (4) 1/2 in., (4) 3/4 in. Bottom: (2) 1/2 in., (2) 1 in.
60 cu. in.
63W
3-Gang Floor Box 10-1/4 in.
Ends: (6) 1/2 in., (6) 3/4 in. Bottom: (3) 1/2 in., (3) 1 in.
90 cu. in.
Std.
Ctn.
1
w w w.t nb.c a
Floor Boxes
Flush Service Floor Boxes
Metallic Carpet Plates for 60W Series
P64-CP
Cat. No.
P64-2G-CP
P64-3G-CP
Number of Gangs
Outside Dimension
(in.)
1
4-5/8 x 6-1/8
2
7-5/8 x 6-1/8
3
10-5/8 x 6-1/8
4
13-5/8 x 6-1/8
P64-CP
P64-CP-AL
P64-2G-CP
P64-2G-CP-AL
P64-3G-CP
P64-3G-CP-AL
P64-4G-CP
P64-4G-CP-AL
P64-4G-CP
Std.
Ctn.
Material
Brass
Aluminum
Brass
Aluminum
4
Brass
Aluminum
Brass
Aluminum
Nonmetallic Carpet Plates for 60W Series
•Translucent polycarbonate material
•To install LCP Series Plates, remove trim ring and place inside.
Replace trim ring on box.
•Textured finish
P64P-CP
Cat. No.
P64P-CP-BLK*
P64P-CP-GRY*
P64P-CP-BGE*
P64P-2G-CP-BLK
P64P-2G-CP-GRY
P64P-2G-CP-BGE
P64P-3G-CP-BLK
P64P-3G-CP-GRY
P64P-3G-CP-BGE
P64-LCP
P64-2LCP
P64-3LCP
P64P-2G-CP
P64P-3G-CP
Number of Gangs
Description
1
Single Gang Carpet Plate
P64-LCP
P64-2LCP
Finish
P64-3LCP
Std.
Ctn.
Black
Grey
Beige
Black
2
Two Gang Carpet Plate
Grey
Beige
Black
3
Three Gang Carpet Plate
4
Grey
Beige
1
Single Gang Carpet Plate
2
Two Gang Carpet Plate
3
Three Gang Carpet Plate
Clear
* Not CSA Certified
w w w. t nb. c a
C7
Floor Boxes
Flush Service Floor Boxes
MopTite™ Cover Plates for 60W Series
•Polished-brass finish
•Furnished complete with sealing gasket and #8-32 x 7/16 in. brass screws
•3 in. x 4-1/2 in. outside dimension
4-1/2 in.
Cat. No.
3-1/2 in.
3 in. 2-1/8 in.
3/16 in.
Plate Dimensions
P-64-3/4-AL
P-64-2-5/8
P-64-DS
3/4 in. & 2 in. dia. plugs
2-5/8 in. dia. plug
Duplex Lift Lids
P-64-DU
P-64-GFCI
Duplex 1-7/16 in. plug Cover Plate GFCI
Flip Lid
P-64-1/2
P-64-3/4
1/2 in. N.P.S. plug
3/4 in. N.P.S. plug
P-64-1
P-64-1-1/4
P-64-2
P-64-1/2-2
1 in. N.P.S. plug
1-1/4 in. N.P.S. plug
2 in. dia. plug
1/2 in. & 2 in. dia.
plugs
P-64-1/2
P-64-1/2-AL
P-64-3/4
P-64-3/4-AL
P-64-1
P-64-1-AL
P-64-1-1/4
P-64-1-1/4-AL
P-64-2
P-64-2-AL
P-64-1/2-2
P-64-1/2-2-AL
P-64-3/4-2
P-64-3/4-2-AL
P-64-2-5/8
P-64-2-5/8-AL
P-64-DU
P-64-DU-AL
P-64-DS
P-64-DS-AL
P-64-GFCI
P-64-GFCI-AL
Description
Cover Plate 1/2 in. N.P.S. Plug
Cover Plate 3/4 in. N.P.S. Plug
Cover Plate 1 in. N.P.S. Plug
Cover Plate 1-1/4 in. N.P.S. Plug
Cover Plate 2 in. UN Plug
Cover Plate 1/2 in. & 2 in. UN Plugs
Cover Plate 3/4 in. & 2 in. UN Plugs
Cover Plate 2-5/8 in. UN Plug
Cover Plate Duplex 1-7/16 in. Plug
Cover Plate Duplex Lift Lid
Cover Plate GFCI Flip Lid
Finish
Std.
Ctn.
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
4
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
New MopTiteTM Covers exceeds UL Scrub-water exclusion requirements.
MopTite™ Nonmetallic Covers for 60W Series
•Furnished complete with sealing gasket and #8-32 x 7/16 in. screws
•3 in. x 4-1/2 in. outside dimension
Cat. No.
P-64-P-URC-BLK
P-64-P-URC-GRY
P-64-P-URC-BGE
P-64-P-URC-BRN
P-64-P-BP-BLK*
P-64-P-BP-GRY*
P-64-P-BP-BGE*
Description
Finish
Std.
Ctn.
Black
Universal Cover
Grey
Beige
Brown
4
Black
Blank Cover
Grey
Beige
*Not CSA Certified
New MopTiteTM Covers exceeds UL Scrub-water exclusion requirements.
C8
w w w.t nb.c a
Floor Boxes
Flush Service Floor Boxes
Steel City® Single-Gang Residential Floor Box Kit
Single-Gang Residential
Floor Box Kit for Wood Floors
Tired of tripping over extension cords? Look no further than the Steel
City® Single-Gang Residential Floor Box Kit from Thomas & Betts. This
affordable and conveniently packaged kit for the residential market
provides power right where you need it most
•Kit includes switch box, cover, flange and tamper resistant receptacle
•Durable metallic covers and flanges are available in aesthetic brass or
nickel finishes
•Available with duplex or GFCI tamper resistant receptacle
•MopTiteTM covers meet scrub-water requirements for wood,
tile and carpet
•3 in. x 2 in. Switch Box is 3-1/2 in. deep with 18 cu. in. capacity
•Box includes integral nonmetallic sheathed cable clamps
Brass finish with duplex receptacle
Technical Specifications
• Material: Box – Galvanized Steel/Cover – Brass or Nickel plated
Aluminum/Flange – Die-cast Zinc with Brass or Nickel finish
Cat. No.
Nickel finish with GFCI receptacle
w w w. t nb. c a
71W-DS-C
71W-DS-N-C
71W-GFCI-C
71W-GFCI-N-C
Description
Duplex Receptacle
GFCI Receptacle
Finish
Std.
Ctn.
Brass
Nickel
Brass
4
Nickel
C9
Floor Boxes
Residential Floor Boxes
Drop-In Floor Box
Features
•
•
•
•
•
•
•
•
•
•
•
•
Single hole installation
Solid brass cover has a light lacquer finish to resist wear – Ideal for high traffic areas
Accommodates high and low voltage applications
Includes single gang grounded* receptacle, low voltage telephone/cable plate
(data jacks not included) and blank plate for custom installations
Available with or without a hole saw
11.8 inch cubic capacity
For wood floor installations
Ideal for residential and home offices
Eliminates the need for extension cords
Superior aesthetics – Ideal for home offices and entertainment rooms
cULus Listed floor box
2.25 in. installation hole diameter
*Tamper-resistant
The Carlon® Drop-In Floor Box with Brass Cover combines many of the same features of our
existing Floor Box line with the strength, durability and style necessary to accommodate today’s
residential electrical/telecommunication needs.
The Carlon Drop-in-Floor Box is the easiest way for contractors to put a floor socket anywhere they
need it! It’s designed to accommodate high and low voltage applications and comes complete with
everything needed for installation – Floor box, Brass Cover, hole saw, wired receptacle, two-hole
low voltage plate, blank plate, mounting screws and wire connectors.
Note: The Drop-In Floor Box is available with or without a hole saw.
Installed
Specifications
Cat. No.
E971FBDI-2
E971FBDIB-2
E971FADI-2
E971FADIB-2
C10
Cover
Brass
Aluminum
Description
Std. Ctn. Std. Ctn.
Qty.
Wt. (lb.)
With Hole Saw
5
6.5
Without Hole Saw
20
17.6
With Hole Saw
5
6.5
Without Hole Saw
20
17.6
w w w.t nb.c a
Floor Boxes
Residential Floor Boxes
Installation
Warning: De-energize system prior to installation
1. Cut a 2-3/8 in. hole through carpeting
before using hole saw.
2. Drill hole in floor using hole saw.
3. Pull cable through floor.
4. Connect receptacle wires to cable.
Be sure to match wire colour(s).
5. Secure wire clamp on bottom of tube.
6. Brass cover snaps into place. Use a
small screwdriver to pry open brass
cover to plug in appliance.
One of the three
latch holes on
floor box tube.
7. Align the three latches on the low
voltage plate with the three latch
holes in the round floor box tube.
w w w. t nb. c a
8. Remove receptacle by pressing three
tabs located on side of tube.
C11
Floor Boxes
Rectangular Floor Boxes
1-, 2- and 3-Gang
Features
• Covers require no adjusting collar. Two screws assure a flush, secure installation.
• Nonmetallic PVC construction, watertight gasket and corrosion-resistant hardware assure
long life and reliable performance even in harsh and/or corrosive environments
• One consistent box depth simplifies ordering time and reduces inventory
• Saves time and money on installations with simple saw cut to floor level
• Concrete tight and suitable for any on grade/below grade application; concrete or wood
sub-floor construction approved
•
•
•
•
•
•
•
Convenient cubic inch capacity markings on inside allow for easy inspection
PVC molded hubs and reducer plugs included
Accepts 1/2 in., 3/4 in. and 1 in. conduit tubing or raceway
Rectangular sides are drillable
For tile and carpet applications
Cover options include solid brass, stainless steel and nonmetallic (brown, slate and caramel)
UL scrub w­ater tested, approved for all types of finished flooring
Carlon® Rectangular Floor Box Systems – two-way, data and
communications plus easy double or triple ganging, too.
Two-in-one data and communications capability cuts installation time and
cost even more, while simple two- and three-gang modularity gives you
the flexibility, installation ease and cost-savings no other nonmetallic
boxes can.
The covers attach without the use of fasteners, providing a professional,
clean installation as well as preserving the aesthetic look of the product.
Take a close look at what our rectangular floor box systems can offer you.
C12
w w w.t nb.c a
Floor Boxes
Rectangular Floor Boxes
Installation
With our rectangular boxes, one SKU is all you ever need. Simply remove
appropriate sides and slide boxes together to create two- or three-gang
boxes for on-the-job flexibility no competitor offers.
Specifications
Rectangular Floor Box
6 in.
5.50 in.
7.46 in.
6 in.
3.25 in.
Cat. No.
Material
Number
of gangs
E976RFB
PVC
1
Min.
Internal
Concrete
Reducer
Volume
Hubs
Depth
Plugs
(cu. in.)
(in.)
97.4
(2) 1 in. x 3/4 in.
(16.8 per inch
3-1/2
(2) 1 in.
(2) 3/4 in. x 1/2 in.
of depth)
Std.
Std.
Ctn.
Ctn.
Qty. Wt. lb.
3
6.92
Activation Kit
Activation kit provides components to accommodate all data and communications
devices plus a divider.
w w w. t nb. c a
Cat. No.
Material
Std. Ctn. Qty.
Std. Ctn. Wt. lb.
E976AK2
PVC
3
2.47
C13
Floor Boxes
Rectangular Floor Box Covers
Nonmetallic
1-, 2- and 3-Gang
Features
•
•
•
•
•
•
High impact resistant thermoplastic
Field reversible for tile or carpet
Gasketed for a watertight seal
Double door design
For tile and carpet applications
Scrub water tested
On-the-job flexibility extends to our rectangular box covers. Each one-, two or three-gang cover
is suitable for any wiring application and can be used with any floor surface. Nonmetallic
covers are even field reversible for tile or carpet. Double door feature allows easy access to the
device and helps keep stray cords organized.
Carlon® Rectangular Floor box covers do not require a separate carpet flange. The carpet
flange is part of the cover and may be removed for tile application.
Specifications
Cat. No.
E9761B
E9762B
E9763B
E9761C
E9762C
E9763C
E9761S
E9762S
E9763S
C14
Number of gangs
Colour
Carpet Flange
1
2
Brown
Dimensions (W x L)
(in.)
Std. Ctn. Qty.
Std. Ctn.
Wt. (lb.)
7.13 x 5.00
3
1.7
7.13 x 8.25
9
8.5
3
7.13 x 11.50
6
7.5
1
7.13 x 5.00
3
1.7
2
Caramel
3
1
2
3
Slate
Included
7.13 x 8.25
9
8.5
7.13 x 11.50
6
7.5
7.13 x 5.00
3
1.7
7.13 x 8.25
9
8.5
7.13 x 11.50
6
7.5
w w w.t nb.c a
Floor Boxes
Rectangular Floor Box Covers
Brass and Stainless Steel
1-, 2- and 3-Gang
Features
•
•
•
•
•
Rugged construction
Coated with a light lacquer finish for extra protection
Covers include a cord door
Gasketed for watertight applications
Scrub water tested
Carlon® Brass and Stainless Steel rectangular Floor Box Covers add a classic
touch to all floor box installations and are particularly suited for use in high-traffic
areas because of the resistance to wear. The gasket gives a watertight seal and
the light lacquer finish provides extra protection.
Specifications
11.50
8.25
5.00
7.13
7.13
7.13
One-Gang
Two-Gang
Three-Gang
Cat. No.
E9761BR
E9762BR
E9763BR
E9761SS
E9762SS
E9763SS
Number of gangs
Material
Std. Ctn. Qty.
3
6.8
Brass
3
9.9
3
3
12.1
1
3
7.4
3
11.6
3
17.2
1
2
2
3
Stainless Steel
Stainless Steel
Std. Ctn. Wt. (lb.)
Cat. No.
Description
Std. Ctn. Qty.
Std. Ctn. Wt. (lb.)
E976AK2
Rectangular Floor Box Activation Kit
3
2.47
w w w. t nb. c a
C15
Floor Boxes
Flush Service Floor Boxes
Round Floor Boxes for Power or Communications: 68 Series
Features
•
•
•
•
•
•
•
Stamped steel, concrete-tight, fully adjustable
Electro-galvanized body and hardware
Interior and exterior leveling screws permit adjustment to meet finished floor
Shipped complete with expendable cap to prevent ingress of concrete during pour
1/2 in., 3/4 in. and 1 in. knockouts – all bottom knockouts are accessible
Uses P60 Series MopTite covers and carpet plate
TM
For brushed aluminum, add AL after catalogue number
68 Series Floor Boxes provide flush service for power or communications/data.
68 Series Floor Boxes can be used for carpet or tile applications.
68 Series — Stamped Steel
68-D
68-D-AL
68-S
68-S-AL
Std.
Ctn
Description
Cat. No.
Deep
Aluminum Deep
4
Shallow
Aluminum Shallow
C
A
B
Engineering Data — 68 Series
Cat. No.
68-D
68-S
Dimensions (in.)
A
4-1/4
B
3-5/8
2-3/4
C
4-11/16
Before
Pour Adj.
(in.)
2-1/2
After
Pour Adj.
(in.)
1/2
Maximum
Capacity
(cu. in.)
Sides
Bottom
60
(4) 3/4
(2) 1/2
47
(4) 1
(2) 3/4
KOS (in.)
Use P-60 Series covers and carpet plates. Wiring Device: Duplex, single or voice/data plates
C16
w w w.t nb.c a
Floor Boxes
Flush Service Floor Boxes
Round Floor Boxes for Power or Communications: 600 Series
Features
Cast iron, watertight body, fully adjustable
Painted silver enamel inside and out for additional corrosion resistance
Interior and exterior leveling screws permit adjustment to meet finished floor
Shipped complete with expendable cap to prevent ingress of concrete during pour
3/4 in. threaded conduit openings are standard
Uses P60 Series MopTite covers and carpet plate
For brushed aluminum, add AL after catalogue number
600 Series Floor Boxes provide flush service for power or communications/data.
600 Series Floor Boxes can be used for carpet or tile applications.
•
•
•
•
•
•
•
TM
600 Series — Cast Iron
Std.
Ctn.
Description
Cat. No.
600-SC
600-AL-SC
600-1-SC
600-2-SC
601-1/2-SC
601-SC
601-1
601-1-1/4
602-SC
603-SC
603-AL-SC
604-SC
604-AL-SC
3/4 in. Conduit Tapping
Aluminum Trim Ring
1 in. Conduit Tapping
2 in. Conduit Tapping
1/2 in. Conduit Tapping
3/4 in. Conduit Tapping
4
1 in. Conduit Tapping
1-1/4 in. Conduit Tapping
3/4 in. Conduit Tapping
3/4 in. Conduit Tapping
3/4 in. Conduit Tapping with Aluminum Trim Ring
3/4 in. Conduit Tapping
3/4 in. Conduit Tapping with Aluminum Trim Ring
P-60 Covers sold separately
Engineering Data — 600 Series
Dimensions (in.)
Cat. No.
A
600-SC
600-1-SC
600-1-1/4
600-2-SC
601-SC
601-1
601-1-1/4
602-SC
603-SC
604-SC
B
C
Maximum Conduit
Before
After
Maximum
Standard
Tapping (in.)
Pour Adj. Pour Adj. Capacity
Conduit
w/o
(in.)
(in.)
(cu. in.) Tapping (in.) w/Bushing
Bushing
4-1/4
64
5-1/8
4-1/4
2-1/2
15/16
3-9/16
56
3-1/32
36
2-1/2
2
4
1-1/2
11/16
27
–
15
3/4
1-1/2
2
1
1
1
1-1/4
1-1/4
1-1/4
2
1-1/2
2
3/4
1
1-1/4
1
1
1
1-1/4
1-1/4
1-1/4
3/4
3/4
KOS (in.)
Sides
Bottom
(4) 3/4
(2) 3/4
–
–
1
3/4
–
Use P-60 Series covers and carpet plates. Wiring Device: Duplex, single or voice/data plates
w w w. t nb. c a
C17
Floor Boxes
Flush Service Floor Boxes
MopTite™ Carpet Plates for 68 and 600 Series
P-60-3/4-2-CACP
P-60-CP
P-60-LCP
•Polished brass finish
•Polished brass finish
•Translucent polycarbonate
•Carpet plate with 3/4 in. and 2 in. plugs
•Furnished complete with 8-32 x 1 in. brass screws
•Textured finish
•Furnished complete with sealing gasket and
8-32 x 1 in. brass screws
•5-3/4 in. outside diameter
•For brushed aluminum, add AL after
catalogue number
120º
5-3/4 in.
3-3/8 in.
P-60-CACP
•Polished brass finish
3/16 in.
•Carpet plate with duplex hinged lift lids
•Furnished complete with sealing gasket and 8-32 x 1 in.
brass screws
•5-3/4 in. outside diameter
P-60-CACP-GFCI
Description
Cat. No.
P-60-CP
P-60-CP-AL
P-60-LCP
P-60-CACP
P-60-CACP-AL
P-60-3/4-2-CACP
P-60-3/4-2-CACP-AL
P-60-CACP-GFCI
P-60-CACP-GFI-AL
Carpet Plate, 5-11/16 in. diameter
Carpet Plate
Finish
Brass
Aluminum
Carpet Plate, 5-3/8 in. diameter
Brass
One-Piece Carpet Cover Plate
Brass
One-Piece Carpet Cover Plate
Std.
Ctn.
Aluminum
One-Piece Carpet Plate with 3/4 in. – 2 in. Plugs
Polycarbonate
One-Piece Carpet Plate with 3/4 in.– 2 in. Plugs
Aluminum
One-Piece Carpet Plate for GFCI Devices
Brass
One-Piece Carpet Plate for GFCI Devices
Aluminum
4
For replacement parts, please refer to pages C89 – C90.
•Polished brass finish
•Carpet plate with GFCI lift lids
•Furnished complete with sealing gasket and 8-32 x 1 in. brass screws
•5-3/4 in. outside diameter
C18
w w w.t nb.c a
Floor Boxes
Flush Service Floor Boxes
MopTite™ Carpet Plates for 68 and 600 Series
•Polished brass finish
•Furnished complete with sealing gasket and 8-32 x 7/16 in. brass screws
•4 in. outside diameter
P-60-DS*
P-60-1/2
P-60-3/4
1/2 in. N.P.S. plug
3/4 in. N.P.S. plug
P-60-1
P-60-1-1/4
1 in. N.P.S. plug
1-1/4 in. N.P.S. plug
P-60-DU*
Hinged Lift Lids
Duplex 1-7/16 in. Lid
Cat. No.
P-60-1/2
P-60-1/2-AL
P-60-3/4
P-60-3/4-AL
P-60-1
P-60-1-AL
P-60-1-1/4
P-60-1-1/4-AL
P-60-2
P-60-2-AL
P-60-2-5/8
P-60-2-5/8-AL
P-60-1/2-2
P-60-1/2-2-AL
P-60-3/4-2
P-60-3/4-2-AL
P-60-DR
P-60-DS
P-60-DS-AL
P-60-DU
P-60-DU-AL
P-60-GFCI
P-60-GFCI-AL
Description
1/2 in. N.P.S. Plug Size
3/4 in. N.P.S. Plug Size
1 in. N.P.S. Plug Size
1-1/4 in. N.P.S. Plug Size
2 in. Diameter Plug Size
2-5/8 in. Diameter Plug Size
1/2 – 2 in. Diameter Plug Size
3/4 – 2 in. Diameter Plug Size
Finish
With Two 1-7/16 in. Plugs for Duplex
For GFCI Devices
w w w. t nb. c a
P-60-2-5/8*
2-5/8 in. dia. plug
Brass
Brass
Aluminum
Brass
Aluminum
Brass
P-60-1/2-2*
P-60-3/4-2*
1/2 in. & 2 in. dia. plugs
3/4 in. & 2 in. dia. plugs
Aluminum
Brass
Aluminum
Brass
Aluminum
4
Brass
Aluminum
Brass
Aluminum
P-60-DR*
P-60-GFCI*
Duplex lift lid
For GFCI Devices
Brass
Brass
4 in.
Aluminum
Brass
Aluminum
Brass
Aluminum
68P-FL or 68P-FL-AL required to attach cover plates to 68-P floor box
New MopTite Covers exceed UL watertight requirements for 514A, 514C
For replacement parts please refer to pages C89 – C90.
TM
P-60-2*
2 in. dia. plug
Aluminum
With Duplex Lift Lid
For Duplex with Individual Lift Lids
Std.
Ctn.
30º
3-3/8 in.
3/16 in.
*Also includes steel seating plate for receptacles
C19
Floor Boxes
Flush Service Floor Boxes
Floor Boxes for Single Short-Strap Receptable
or Communications
Features — 78 Series
• Cast iron, watertight body, semi-adjustable
• Painted silver enamel inside and out for additional corrosion resistance
• Exterior leveling screws and threaded vertical adjusting ring permit adjustment to meet
finished floor
• Shipped complete with expendable cap to prevent ingress of concrete during pour
• 3/4 in. threaded conduit openings
• Uses P90 Series MopTite covers and carpet plate
TM
Features — 88 Series
• Stamped steel, concrete-tight, semi-adjustable
• Electro-galvanized body and hardware
• Exterior leveling screws and threaded vertical adjusting ring permit adjustment to meet
finished floor
• Shipped complete with expendable cap to prevent ingress of concrete during pour
• 1/2 in. and 3/4 in. knockouts – all bottom knockouts accessible
• Uses P90 Series MopTite covers and carpet plate
TM
Service Fitting Application
78 and 88 Series Floor Boxes provide flush service for power or communications and data.
They can be used for either carpet or tile applications.
78 and 88 Series Floor Boxes
Std.
Ctn.
Description
Cat. No.
78-SC
78-S
88-S
Cast-Iron Floor Box with 3/4 in. Conduit Tapping
4
Cast-Iron Floor Box (shallow)
Shallow Version Stamped Steel
SFH, SFL Series
Service Fitting
P-90-1 Cover
Plate
C
78, 88 or 98
Service Floor Box
A
B
Engineering Data — 78 and 88 Series
Dimensions (in.)
Cat. No.
A
78-SC
78-S
88-S
C20
B
2-13/16
3
2-5/8
2-3/4
C
3-7/8
5-3/4
Maximum Conduit
Before After
Standard
Maximum
Tapping (in.)
Pour Pour
Conduit
Capacity
Adj.
Adj.
Tapping
w/o
(cu. in.)
w/Bushing
(in.)
(in.)
(in.)
Bushing
2-1/2
24
1-1/2
20
1-1/2
3/4
23
3/4
–
3/4
–
1
–
KOS (in.)
Sides Bottom
–
–
(2) 1/2
(3) 1/2
(2) 3/4
(2) 3/4
Covers
and
Carpet
Plates
Wiring
Device
P90
Series
Sing. Short,
Strap rec.
w w w.t nb.c a
Floor Boxes
Flush Service Floor Boxes
MopTite™ Cover Plates for 78 and 88 Series
•
•
•
•
Polished brass finish
Furnished complete with sealing gasket
and 6-32 x 1/2 in. brass screws
2-13/16 in. outside diameter
For brushed aluminum, add AL after
catalogue number
P-90-1/2
P-90-3/4
P-90-1
P-90-1-1/4
1/2 in. N.P.S. plug
3/4 in. N.P.S. plug
1 in. N.P.S. plug
1-1/4 in. N.P.S. plug
P-90-2*
P-90-1/2-2*
P-90-3/4-2*
2 in. dia. plug
1/2 in. & 2 in. dia. plugs
3/4 in. & 2 in. dia. plugs
* Also includes steel seating plates for receptacles
Cover Plate
Description
Cat. No.
P-90-1/2
P-90-3/4
P-90-3/4-AL
P-90-1
P-90-1-AL
P-90-1-1/4
P-90-1-1/4-AL
P-90-2
P-90-2-AL
P-90-1/2-2
P-90-3/4-2
P-90-3/4-2-AL
Finish
1/2 in. N.P.S. Plug Size
Std.
Ctn.
2-3/8 in.
Brass
3/4 in. N.P.S. Plug Size
Aluminum
Brass
1 in. N.P.S. Plug Size
Aluminum
Brass
1-1/4 in. N.P.S. Plug Size
Aluminum
4
Brass
2 in. Diameter Plug Size
Aluminum
1/2 in. – 2 in. Diameter Plug Size
3/4 in. – 2 in. Diameter Plug Size
2-13/16 in.
Brass
Aluminum
New MopTite Covers exceed UL watertight requirements for 514A, 514C
For above-floor service fittings for 78, 88 and 98 Series floor boxes, see page C84.
TM
3/16 in. Dia.
Carpet Plate for 78 and 88 Series
Floor Boxes
Accessories for 78 and 88 Series
Floor Boxes
478-G-12
• 15 Amp, 125 Volt, NEMA
grounding type
• Mounted on Steel Seating
Plate
• For use with 2 in. diameter
opening floor plate
8805-E
478-G-12
8805-E
• Extends vertical adjusting
ring 1-1/8 in.
• 7 cubic inch capacity
Description
Cat. No.
• Polished brass finish
• Furnished complete with
6-32 in. x 1 in. brass flathead
screws and gasket
• Threaded 2-20-UN-2B to
accept 694 plug
• 3-3/8 in. O.D. with 5/8 in.
flange
• For brushed aluminum, add AL after catalogue number
Extension Adjusting Ring
15 Amp 125 Volt NEMA Grounding Receptacle
Std.
Ctn.
4
Cat. No.
P-90-CP
P-90-CP-AL
Description
Carpet Plate
P-90-CP
Finish
Brass
Aluminum
Std.
Ctn.
4
Will not accept P90 covers. Will accept 694 threaded plug
w w w. t nb. c a
C21
Floor Boxes
Flush Service Floor Boxes
Floor Boxes for single Short-Strap Receptable
or Communications
671 and 672 Floor Boxes
671 and 672 Series Floor Boxes provide flush service for power, communications and data.
They can be used in either wood or concrete floors and are suitable for carpet, tile or wood
applications.
•
•
•
•
•
672
Cast iron, watertight body, non-adjustable
Painted silver enamel inside and out for additional corrosion resistance
For use in wood or concrete floors
1/2 in. and 3/4 in. threaded conduit openings; uses P67 Series covers
Cat. No. 672 is the 671 floor box with factory-mounted 15 ampere, 125 Volt, NEMA
grounding receptacle and P67-2 MopTite cover plate
TM
671SC
B
A
C
Engineering Data — 671 and 672 Series
Dimensions (in.)
Cat. No.
A
671 SC
B
C22
2-31/32
13
Maximum Conduit
Tapping (in.)
Tapping w/o Bushing
3
3-1/2
672
C
Maximum
Capacity
(cu. in.)
3-3/16
3/4
3/4
Conduit KO’s (in.)
Sides
2 – 1/2
2 – 3/4
2 – 1/2
2 – 3/4
Bottom
2 – 1/2
Wiring
Device
Std.
Ctn.
Sing. Short
Strap rec.
4
w w w.t nb.c a
Floor Boxes
Flush Service Floor Boxes
MopTite™ Cover Plates for 671 and 672 Series
•
•
•
Polished brass finish
Furnished complete with sealing gasket and 6-32 x 1/2 in.
brass screws
3-1/2 in. outside diameter
2-3/8 in.
P-67-1/2
P-67-3/4
P-67-1
1/2 in. N.P.S. plug
3/4 in. N.P.S. plug
1 in. N.P.S. plug
P-67-1-1/4*
P-67-2
1-1/4 in. N.P.S. plug
2 in. dia. plug
3-1/2 in.
3/16 in.
Dia.
P-67-1/2-2*
P-67-3/4-2*
1/2 in. & 2 in. dia. plugs
3/4 in. & 2 in. dia. plugs
*Also includes seating plate for receptacle
Description
Cat. No.
P-67-1/2
P-67-3/4*
P-67-3/4-AL
P-67-1*
P-67-1-AL*
P-67-1-1/4
P-67-2
P-67-2-AL
P-67-1/2-2*
P-67-3/4-2
Std.
Ctn.
Finish
Cover Plate with 1/2 in. N.P.S. Plug
Brass
Cover Plate with 3/4 in. N.P.S. Plug
Aluminum
Brass
Cover Plate with 1 in. N.P.S. Plug
Aluminum
Cover Plate with 1-1/4 in. N.P.S. Plug
4
Brass
Cover Plate with 2 in. UN Threaded Plug
Aluminum
Cover Plate with 1/2 in. & 2 in. Plug
Brass
Cover Plate with 3/4 in. & 2 in. Plug
* Not CSA Certified
Accessories for 671 and 672 Series
Floor Boxes
478-G-12
•
•
•
15 Amp, 125 Volt, NEMA grounding type
Mounted on steel
seating plate
For use with 2 in.
diameter opening
floor plate
w w w. t nb. c a
P-67-F
•
•
Use brass edge ring for neat
appearance when nonadjustable floor box is
installed in concrete
Edge ring has 3-3/4 in. OD
and adds 3/8 in. to floor
box height
Description
Cat. No.
P-67-F
478-G-12
Carpet Plate for 671 and 672 Series
Floor Boxes
Edge Ring
15 Amp 125 Volt NEMA Grounding Receptacle
Std. Ctn.
4
•
•
•
•
Polished brass finish
Furnished complete with 6-32 in. x
1 in. brass flathead screws and gasket
3-3/8 in. O.D. with 5/8 in. flange
For brushed aluminum, add AL after
catalogue number
P-90-CP
Cat. No.
P-90-CP
P-90-CP-AL
Description
Carpet Plate
Finish
Brass
Aluminum
Std. Ctn.
4
C23
Floor Boxes
Flush Service Floor Boxes
Multi-Gang Floor Boxes for Power and Communications
Features — 640 Series
641
•
•
•
•
•
•
•
•
Cast iron, watertight body, fully adjustable
Painted silver enamel inside and out for additional corrosion resistance
Interior and exterior leveling screws permit adjustment to meet finished floor
Removable partitions for large capacity requirements on 2-, 3- and 4- gang
Shipped complete with expendable cap to prevent ingress of concrete during pour
3/4 in. threaded conduit openings are standard
Uses P64 Series MopTite covers (one cover per gang)
For brushed aluminum, add AL after catalogue number
TM
Features — 840 Series (shallow)
842SC
Cat. No.
641
641-1
641-AL
•
•
•
•
•
•
•
•
Cast iron, watertight body, fully adjustable
Painted silver enamel inside and out for additional corrosion resistance
Exterior leveling screws for adjustment to finished floor
Removable partitions for large capacity requirements on 2- and 3- gang
Shipped complete with expendable cap to prevent ingress of concrete during pour
3/4 in. threaded conduit openings are standard
Uses P64 Series MopTite covers (one cover per gang)
For brushed aluminum, add AL after catalogue number
TM
Description
Std. Ctn.
Single-Gang Floor Box with 3/4 in. Conduit Tapping
640 and 840 Series Floor Boxes provide flush service for power,
communications and data. Multiple-gang boxes enable the user
to place high- and low-voltage in a single floor box. Floor boxes up
to four-gangs are available. 640 and 840 Series boxes can be used
for either carpet or tile applications.
Single-Gang Floor Box with 1 in. Conduit Tapping
Single-Gang with Aluminum Trim
4
Single-Gang Floor Box with 1 in. Conduit
SP-641-1-AL* Tapping and Aluminum Tile Trim
642
642-1
642-AL
Two-Gang Floor Box with 3/4 in. Conduit Tapping
Two-Gang Floor Box with 1 in. Conduit Tapping
Two-Gang with Aluminum Trim
2
Two-Gang Floor Box with 1 in. Conduit
SP-642-1-AL* Tapping and Aluminum Tile Trim
Three-Gang Floor Box with 3/4 in. Conduit Tapping
643
Three-Gang Floor Box with 1 in. Conduit Tapping
643-1
Three-Gang Floor Box with Aluminum Trim
643-AL
Three-Gang Floor Box with 1 in. Conduit
SP-643-1-AL* Tapping and Aluminum Tile Trim
Four-Gang Floor Box with 3/4 in. Conduit Tapping
644
Four-Gang Floor Box with Aluminum Trim
644-AL
Single-Gang Floor Box with 3/4 in. Conduit Tapping
841-SC
Single-Gang Floor Box with Aluminum Trim
841-AL
Two-Gang Floor Box with 3/4 in. Conduit Tapping
842-SC*
Two-Gang Floor Box with Aluminum Trim
842-AL-SC
Three-Gang Floor Box with 3/4 in. Conduit Tapping
843-SC
Three-Gang Floor Box with Aluminum Trim
843-AL-SC
* Not CSA Certified
Boxes supplied with brass tile trim unless otherwise specified
C24
643
1
4
2
1
644
w w w.t nb.c a
Floor Boxes
Flush Service Floor Boxes
MopTite™ Cover Plates for 640 and 840 Series
4-1/2 in.
3-1/2 in.
• Polished brass finish
• Furnished complete with sealing gasket and 8-32 x 7/16 in. brass screws
• 3 in. x 4-1/2 in. outside dimensions
•For brushed aluminum, add AL
3 in.
2-1/8 in.
3/16 in.
after catalogue number
Description
Cat. No.
P-64-1/2
P-64-1/2-AL
P-64-3/4
P-64-3/4-AL
P-64-1
P-64-1-AL
P-64-1-1/4
P-64-1-1/4-AL
P-64-2
P-64-2-AL
P-64-1/2-2
P-64-1/2-2-AL
P-64-3/4-2
P-64-3/4-2-AL
P-64-2-5/8
P-64-2-5/8-AL
P-64-DU
P-64-DU-AL
P-64-DS
P-64-DS-AL
P-64-GFCI
P-64-GFCI-AL
Finish
Plate Dimensions
Std.
Ctn.
Brass
Cover Plate 1/2 in. N.P.S. Plug
Aluminum
Brass
Cover Plate 3/4 in. N.P.S. Plug
Aluminum
P-64-3/4-2*
Brass
Cover Plate 1 in. N.P.S. Plug
Aluminum
Cover Plate 1-1/4 in. N.P.S. Plug
P-64-2-5/8*
P-64-DS*
3/4 in. & 2 in. dia. plugs 2-5/8 in. dia. plug
Duplex lift lids
Brass
Aluminum
Brass
Cover Plate 2 in. UN Plug
Aluminum
Brass
Cover Plate 1/2 & 2 in. UN Plug
Aluminum
P-64-DU*
P-64-GFCI
Duplex 1-7/16 in. plug Cover Plate GFCI
Flip Lid
4
P-64-1/2
P-64-3/4
1/2 in. N.P.S. plug
3/4 in. N.P.S. plug
P-64-2*
P-64-1/2-2*
Brass
Cover Plate 3/4 & 2 in. UN Plug
Aluminum
Brass
Cover Plate 2-5/8 in. UN Plug
Aluminum
Brass
Cover Plate Duplex 1-7/16 in.
Plugs
Aluminum
P-64-1-1/4
1-1/4 in. N.P.S. plug
2 in. dia. plug 1/2 in. & 2 in. dia. plugs
*Also includes seating plate for receptacle like others
Brass
Cover Plate Duplex Lift Lid
P-64-1
1 in. N.P.S. plug
Aluminum
Brass
Cover Plate GFCI Flip Lid
A
Aluminum
B
D
New MopTiteTM Covers exceeds UL scrub-water exclusion requirements for 514A, 514C
C
Engineering Data — 640 and 840 Series
Dimensions (in.)
Cat. No.
641
642
643
644
841-SC
842-SC
843-SC
C
D
Before
Pour Adj.
(in.)
After
Pour Adj.
(in.)
Number
of
Gangs
Maximum Conduit
Maximum Standard
Tapping (in.)
Capacity Conduit
KOS
Tapping
w/Bushing w/o Bushing
(cu. in.)
(in.)
A
B
4
1
35
3-5/8
7
2
37 per gang
3
37 per gang
4
37 per gang
1
15
1-7/8
10
1/2
12-15/16
2-1/2
5/8
5-1/2
4
2
7
1-11/16
1-1/2
10
–
2
16.5 per gang
3
16.5 per gang
1
1-1/4
3/4
3/4
3/4
For replacement parts, please refer to pages C89 – C90
Use P64 Series covers and carpet plates. Wiring Device: Duplex, single or voice/data plates
w w w. t nb. c a
C25
Floor Boxes
Flush Service Floor Boxes
Metallic Carpet Plates for 640 and 840 Series
P64-CP
Cat. No.
P64-2G-CP
Number of Gangs
P64-CP
P64-CP-AL
P64-2G-CP
P64-2G-CP-AL
P64-3G-CP
P64-3G-CP-AL
P64-4G-CP
P64-4G-CP-AL
1
1
2
2
3
3
4
4
P64-3G-CP
Outside Dimension
(in.)
P64-4G-CP
Finish
Std. Ctn.
Brass
4-5/8 x 6-1/8
Aluminum
Brass
7-5/8 x 6-1/8
Aluminum
4
Brass
10-5/8 x 6-1/8
Aluminum
Brass
13-5/8 x 6-1/8
Aluminum
Nonmetallic Carpet Plates for 640 and 840 Series
•To install LCP Series Plates, remove trim ring and place inside.
Replace trim ring on box.
•Translucent polycarbonate material
•Textured finish
P64P-CP
Cat. No.
P64-CP-BLK*
P64-CP-GRY*
P64-2G-BGE*
P64P-2G-CP-BLK
P64P-2G-CP-GRY
P64P-2G-CP-BGE
P64P-3G-CP-BLK
P64P-3G-CP-GRY
P64P-3G-CP-BGE
P64-LCP
P64-2LCP
P64-3LCP
P64P-2G-CP
P64P-3G-CP
Number of Gangs
1
Description
Single Gang Carpet Plate
P64-LCP
P64-2LCP
Colour
P64-3LCP
Std. Ctn.
Black
Grey
Beige
2
Two Gang Carpet Plate
Black
Grey
Beige
Black
3
Three Gang Carpet Plate
4
Grey
Beige
1
Single Gang Carpet Plate
2
Two Gang Carpet Plate
3
Three Gang Carpet Plate
Clear
* Not CSA Certified
For replacement parts please refer to pages C89 – C90
C26
w w w.t nb.c a
Floor Boxes
Flush Service Floor Boxes
MopTite™ Cover Plates for 60W Series
•Furnished complete with sealing gasket and #8-32 x 7/16 in.
brass screws
•3 in. x 4-1/2 in. outside dimension
Cat. No.
P-64-P-URC-BLK
P-64-P-URC-GRY
P-64-P-URC-BGE
P-64-P-BP-BLK*
P-64-P-BP-GRY*
P-64-P-BP-BGE*
Description
Colour
Std. Ctn.
Black
Universal Cover
Grey
Beige
4
Black
Blank Cover
Grey
Beige
Hold-Down Screws
* Not CSA Certified
New MopTiteTM Covers exceed UL scrub-water exclusion requirements
Floor Plate
w/Removable
Plug Insert
Gasket
Receptacle
Seating Plate
Floor Box
Edge Ring
Floor Plate Plug Inserts
Cat. No.
690-SC
691-SC
692-SC
693-SC
694
695
696-SC
697*
698*
Description
Std.
Ctn.
1/2 in. – 14 N.P.S. Thread
3/4 in. – 14 N.P.S. Thread
1 in. – 11-1/2 N.P.S. Thread
1-1/4 in. – 11-1/2 N.P.S. Thread
2 in. – 20 UN Thread
4
1/2 in. – 2 in.
692-SC
3/4 in. – 2 in.
2-5/8 in. – 20 UN Thread
1-7/16 in. for Duplex Plug
*CSA not applicable. Catalogue numbers are for brass.
For aluminum, add AL after catalogue number
695
Gaskets for Floor Plate Assemblies
Cat. No.
SP650*
SP651*
SP-P64-DS-P2
Description
Std.
Ctn.
P-64 Series Floor Plate Assemblies
4
P-64 DU Floor Plate Assemblies
10
P-64 DS Floor Plate Assemblies
4
*CSA not applicable
w w w. t nb. c a
C27
Floor Boxes
Flush Service Floor Boxes
740 Series – Multiple-Gang Floor Boxes for Power
and Communications
Features
•
•
•
•
•
Available in shallow (2-5/8 in. and deep 3-5/8 in.) versions
Available in one-, two- and three-gang versions
Two- and three-gang boxes are supplied with customer-installed dividers
16 ga. pre-galvanized steel construction
Adjustable with four exterior leveling legs capable of 2 in. pre-pour adjustment and an interior leveling ring capable of 1-1/4 in. after pour adjustment
• Made with a variety of KOs ranging from 1/2 in. to 1-1/4 in.
• Boxes utilize the 640P Series metallic and nonmetallic floor box accessories with the unique one-step installation method
• Shipped with expendable steel cap to prevent ingress of concrete at installation
The new 740 Series line of stamped-steel floor boxes are an extension of T&B’s industryleading 640 and 840 Series cast-iron floor boxes. The new boxes provide flush service for
power, communications and data. Multiple-gang boxes allow the user to place high- and
low-voltage in a single floor box. The 740 Series can be used for carpet or tile applications.
B
A
C
Std.
Ctn.
Description
Cat. No.
741-S
742-S
743-S
741-D
742-D
743-D
Shallow One-Gang
4
Shallow Two-Gang
1
Shallow Three-Gang
1
Deep One-gang
4
Deep Two-gang
1
Deep Three-gang
1
Engineering Data — 740 Series
Cat. No.
741-S
742-S
743-S
741-D
742-D
743-D
C28
Dimensions (in.)
A
B
C
Before
Pour Adj.
(in.)
After
Pour Adj.
(in.)
4
2-5/8
7-1/4
10-1/4
4
7-1/4
10-1/4
5-1/2
2
3-5/8
1-1/2
Maximum Conduit Tapping (in.)
Capacity
per Gang
Sides
Ends
Bottom
29 cu. in.
(2) 3/4
(2) 1/2
(1) 1/2 and (1) 3/4
(2) 1/2 and (2) 3/4
26 cu. in.
(4) 3/4
(2) 1/2
26 cu. in.
(6) 3/4
(2) 1/2
(3) 1/2 and (3) 3/4
48 cu. in.
(2) 3/4
(2) 1-1/4
(1) 3/4 and (1) 3/4
41 cu. in.
(4) 3/4
(2) 1-1/4
(2) 3/4 and (2) 3/4
41 cu. in.
(6) 3/4
(2) 1-1/4
(3) 3/4 and (3) 3/4
w w w.t nb.c a
Floor Boxes
Flush Service Floor Boxes
Carpet and Tile Activations for 740 Series
642P-TACA
641P-CACB
Cat. No.
Description
Carpet Activations for 740 Series
641P-CACA
One-Gang
641P-CACB
641P-CAC-BGE
641P-CAC-BLK
One-Gang, Nonmetallic
641P-CAC-GRY
641P-CAC-BRN
642P-CACA
Two-Gang
642P-CACB
642P-CAC-BGE
Two-Gang, Nonmetallic
642P-CAC-BLK
642P-CAC-GRY
643P-CACA
Three-Gang
643P-CACB
643P-CAC-BGE
Three-Gang, Nonmetallic
643P-CAC-BLK
643P-CAC-GRY
Tile Activations for 740 Series
641P-TACA
One-Gang
641P-TACB
641P-TAC-BGE
One-Gang, Nonmetallic
641P-TAC-BLK
641P-TAC-GRY
642P-TACA
Two-Gang
642P-TACB
642P-TAC-BGE
Two-Gang, Nonmetallic
642P-TAC-BLK
642P-TAC-GRY
643P-TACA
Three-Gang
643P-TACB
643P-TAC-BGE
Three-Gang, Nonmetallic
643P-TAC-BLK
643P-TAC-GRY
Finish
Std.
Ctn.
Carpet Activation Kit
Carpet Flange
Aluminum
Brass
Beige
Black
Grey
Brown
Aluminum
Brass
Beige
Black
Grey
Aluminum
Brass
Beige
Black
Grey
Aluminum
Brass
Beige
Black
Grey
Aluminum
Brass
Beige
Black
Grey
Aluminum
Brass
Beige
Black
Grey
Wedge Clip
4
Adjusting Frame
Tile Activation Kit
Tile Flange
4
Ground Screw
For replacement parts please refer to pages C89 – C90
Limit Clips
w w w. t nb. c a
C29
Floor Boxes
Flush Service Floor Boxes
MopTite™ Cover Plates for 740 Series
4-1/2 in.
• Polished brass finish
• Furnished complete with sealing gasket and 8-32 x 7/16 in. brass screws
• 3 in. x 4-1/2 in. outside diameter
3-1/2 in.
3 in.
2-1/8 in.
3/16 in.
Plate Dimensions
P-64-3/4-2*
P-64-2-5/8*
P-64-DS*
P-64-DU*
P-64-GFCI
3/4 in. & 2 dia. plugs
2-5/8 in. dia. plug
Duplex Lift Lids
Duplex 1-7/16 in. plug
Cover Plate GFCI
Flip Lid
P-64-1/2
P-64-3/4
P-64-1
P-64-1-1/4
P-64-2*
P-64-1/2-2*
1/2 in. N.P.S. plug
3/4 in. N.P.S. plug
1 in. N.P.S. plug
1-1/4 in. N.P.S. plug
2 in. dia. plug
1/2 & 2 in. dia. plugs
*Also includes seating plate for receptacle
Description
Cat. No.
P-64-1/2
P-64-1/2-AL
P-64-3/4
P-64-3/4-AL
P-64-1
P-64-1-AL
P-64-1-1/4
P-64-1-1/4-AL
P-64-2
P-64-2-AL
P-64-1/2-2
P-64-1/2-2-AL
P-64-3/4-2
P-64-3/4-2-AL
P-64-2-5/8
P-64-2-5/8-AL
P-64-DU
P-64-DU-AL
P-64-DS
P-64-DS-AL
P-64-GFCI
P-64-GFCI-AL
1/2 in. N.P.S. Plug
3/4 in. N.P.S. Plug
1 in. N.P.S. Plug
1-1/4 in. N.P.S. Plug
2 in. UN Plug
1/2 & 2 in. UN Plug
3/4 & 2 in. UN Plug
2-5/8 in. Plugs
Duplex 1-7/16 in. Plugs
Duplex Lift Lid
GFCI Flip Lid
Finish
Std. Ctn.
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
4
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
New MopTite Covers exceeds UL scrub-water exclusion requirements for 514A, 514C
For replacement parts, please refer to pages C89 – C90
TM
C30
w w w.t nb.c a
Floor Boxes
Flush Service Floor Boxes
MopTite™ Nonmetallic Covers for 740 Series
• Furnished complete with sealing gasket and 8-32 x 7/16 in. brass screws
• 3 in. x 4-1/2 in. outside dimension
Description
Cat. No.
P-64-P-URC-BLK
P-64-P-URC-GRY
P-64-P-URC-BGE
P-64-P-BP-BLK*
P-64-P-BP-GRY*
P-64-P-BP-BGE*
Finish
Std. Ctn.
Black
Universal Cover
Grey
Beige
Black
Blank Cover
4
Grey
Beige
* Not CSA Certified
New MopTiteTM Covers exceed UL scrub-water exclusion requirements
Hold-Down Screws
Floor Plate
w/Removable
Plug Insert
Gasket
Receptacle
Seating Plate
Floor Box
Edge Ring
w w w. t nb. c a
C31
Floor Boxes
Flush Service Floor Boxes
Round Floor Boxes for Power and Communications:
68-HP Series
Innovative 3-Gang Round Floor Box for Power, Data and AV
LARGEST IN THE INDUSTRY
Unmatched flexibility to configure any
combination of power and communications
devices.
Combines the Capacity of a 3-gang
box with the Affordability of a round
nonmetallic floor box.
• Accepts standard devices from any
• 6 in.diameter round nonmetalic floor box —
the largest in the industry
manufacturer, including duplex, GFCI, locking,
hospital grade or isolated ground receptacles
• Accommodates a wide variety of multi-media
• Large inline hubs for power and data wiring:
1 in. for power, 1-1/2 in. for data
devices through the use of rectangular adapters
68-HP Floor Boxes
8 in.
by
10-31/32 in.
DATA
POWER
8-15/16 in.
by
8-1/8 in.
68-HP
6 in. Round Nonmetallic
Floor Box
POWER
DATA
5-31/32 in.
Inside Dia.
5-31/32 in.
Inside Dia.
6-5/16 in.
6 in.
68-HP-CI
Cast Iron FLoor Box with 6 in. Round
Nonmetallic Collar
Cat. No.
68-HP
68-HP-CI
C32
1 in. Dia. Hub
2-PLCS
Description
6 in. Round Nonmetallic Floor Box
Cast Iron Floor Box with 6 in. Round Nonmetallic Collar
1-1/2 in.
Dia. Hub
2-PLCS
1 in. Threaded
Conduit Hub
2-PLCS
1-1/2 in. Threaded
Conduit Hub
2-PLCS
Minimum Concrete Depth
Flush (in.)
4
Furniture Feed (in.)
3-1/2
Std. Ctn.
4
4-1/2
4
1
w w w.t nb.c a
Floor Boxes
Flush Service Floor Boxes
Flush Covers for 68-HP Series
68-HP-FC-BRS
•Slide latch for tool-less
access to devices
•Lid lies flat when box is in use
•Requires Flush Mounting Kit
(Cat. No. 68-HP-FMK)
to mount cover
68-HP-FC-BLK
68-HP-FC-ALM
Solid aluminum cover
with brushed finish
Lid
8 in. Flange Diameter
7/16 in. Flange Thickness
Description
Cat. No.
68-HP-FC-ALM
68-HP-FC-BRS
68-HP-FC-BLK
Std. Ctn.
Flush Cover — Solid Aluminum with Brushed Finish, 1,000 lb. Load Rating
Flush Cover — Solid Brass with Brushed Finish, 1,500 lb. Load Rating
4
Flush Cover — Solid Aluminum with Black Powder-Coated Finish, 1,000 lb. Load Raging
Flush Mounting Kit for 68-HP Series and Accessories
Power KOs
Stainless Steel
Barbs
Kit includes:
•Mounting Frame
•Voltage Divider
•(3) Device Plates
–(1) Center Plate:
GFCI/Rectangular
–(2) Side Plates:
Rectangular
–(3) Duplex Inserts
Optional Accessories
Device Plates
68-HP-DPC-GFCI
68-HP-DPS-DEC
68-HP-DPC-R
Regular Inserts
Data KOs
68-HP-BI
OPODEC6-WH
Description
Cat. No.
68-HP-FMK
68-HP-DPC-GFCI
68-HP-DPS-DEC
68-HP-DPC-R
68-HP-DPC-2MAAP
68-HP-DPS-2MAAP
68-HP-BI
68-HP-DI
OPODEC6-WH
68-HP-DPAV-EXT
68-HP-DI
68-HP-DPC-2MAAP
68-HP-DPS-2MAAP
Extron® AV Plate
Mounting Kit for Flush Covers
68-HP-DPAV-EXT
(Low Voltage Only)
Std. Ctn.
4
Center Device Plate – GFCI/Rectangular Receptacle
Side Device Plate – Rectangular Receptacle
Center Device Plate – Single Round Receptacle, 1-5/8 in. Opening
Center Device Plate – 2 Extron® MAAP Plates*
10
Side Device Plate – 2 Extron® MAAP Plates*
Rectangular Insert – Blank (for unused compartments)
Rectangular Insert – Duplex Receptacle
Rectangular Adapter for GFCI/Rectangular Device Plate – 6 Port Data, Keystone, White**
5
Extron® AV Plate – 3 AAP Plates, 2 MAAP Plates*
1
*Extron® MAAP Plates purchased from an authorized Extron® distributor. Extron® is a registered trademark of RGB Systems, Incorporated
** Additional rectangular adapters available for low voltage applications
w w w. t nb. c a
C33
Floor Boxes
Flush Service Floor Boxes
68-P – Round Nonmetallic Floor Box
The 68-P floor box provides flush service for power, communications and data.
The nonmetallic floor box is used in concrete floors and is suitable for carpet, tile or wood
applications.
•High-strength rigid PVC construction, non-corrosive
68-P
•Easy installation with no leveling required – just cut the box level with the concrete after
the pour
•Compatible with standard-schedule PVC conduit (1 in., 3/4 in. and 1/2 in. reducers included)
•Pre-packaged with concrete cap and six hub plugs
3/16 in. wall Thickness
A
Cat.
No.
68-P
B
­C
A
B
C
After
Pour
Adj.
(in.)
5-5/32
6
6-3/8
None
Dimensions (in.)
Maximum
Capacity
(cu. in.)
Standard
Conduit
Tapping
(in.)
Covers
and
Carpet
Plates
Wiring
Device
Std.
Ctn.
100
(4) 3/4
(2) 1
P60
P68
Series
Single
Duplex or
data/voice
8
Minimum pour 3 inches
Cubic in. capacity is 17 cubic inches per inch of box height
Note: must use 68-PAR to attach cover plates to 68-P floor box
Adjusting Ring for 86-P Floor Box
Description
Cat. No.
68-PAR
Nonmetallic Adjusting Ring
Std. Ctn.
8
Nonmetallic adjusting ring includes pigtail and clips
Required to mount P60 and P68 Series covers to 68P floor box (not needed for dual-voltage kits)
Metallic Tile Trims for 68-P Floor Box
•Tile trim rings are available in brass or aluminum for flush installation of metallic plates
in linoleum, wood or carpeted floors. Must be used to mount P60 Series plates
(Not required for P68 covers, P60-CACP, P60-CACP-AL or P60-3/4-2-CACP)
Description
Cat. No.
68P-FL
Metallic Tile Trims
Std. Ctn.
8
Required to attach P60 cover plates to 68-P floor box
C34
w w w.t nb.c a
Floor Boxes
Flush Service Floor Boxes
MopTite™ Metallic Carpet Plates for 68-P Series
•Polished brass finish
•Furnished complete with 8-32 x 1 in. brass screws
•For brushed aluminum, add AL after catalogue number
P-60-CACP
P-60-3/4-2-CACP
P-60-CACP-GFCI
P-60-CP
One-piece solid-brass
communications carpet plate.
4-3/4 in. O.D. Mounting holes 3-3/8 in. dia.
Description
Cat. No.
P-60-CP•
P-60-CP-AL•
P-60-CACP
P-60-CACP-AL
P-60-3/4-2-CACP
P-60-3/4-2-CACP-AL
P-60-CACP-GFCI•
P60-CACP-GFI-AL•
Finish
Carpet Plate, 5-11/16 in. diameter
Std.
Ctn.
Brass
Carpet Plate
Aluminum
Brass
One-Piece Carpet Plate
Aluminum
4
Brass
One-Piece Carpet Plate with 3/4 in. - 2 in. Plugs
Aluminum
Brass
One-Piece Carpet Plate for GFCI Devices
Aluminum
• Requires 68P-FL or 68P-FL-AL to attach covers to 68-P Floor Box
New MopTiteTM Covers exceed UL watertight requirements for 514A, 514C
MopTite™ Nonmetallic Carpet Plates for 68-P Series
Nonmetallic, single
receptacle plate (SRC) with
matching carpet plate and
cover. 6 in. O.D.
Nonmetallic floor service
cover (FSC) with 1 in. screw
plug accommodates most
above-floor service fittings
with matching carpet plate.
6 in. O.D.
Nonmetallic, duplex/voice
data receptacle plates (DRC)
with matching carpet plate
and cover. 6 in. O.D.
1-13/32 in. DIa.
Opening
Cat. No.
Description
P-68-SRC-GRY
P-68-SRC-BRN
For Single Receptacle
P-68-SRC-BGE
P-68-SRC-BLK
P-68-FSC-GRY
With 1 in. N.P.S. Screw Plug
P-68-FSC-BRN
Colour
Std.
Ctn.
Grey
Brown
Beige
Black
Grey
Brown
4
Cat. No.
Description
P-68-FSC-BGE
With 1 in. N.P.S. Screw Plug
P-68-FSC-BLK
P-68-DRC-GRY
P-68-DRC-BRN
For Duplex Receptacle
P-68-DRC-BGE
P-68-DRC-BLK
Colour
Std.
Ctn.
Beige
Black
Grey
Brown
4
Beige
Black
New MopTiteTM Covers exceed UL watertight requirements for 514A, 514C
w w w. t nb. c a
C35
Floor Boxes
Flush Service Floor Boxes
MopTite™ Cover Plates for 68 and 600 Series
•Polished brass finish
•Furnished complete with sealing gasket and 8-32 x 7/16 in. brass screws
•4 in. outside diameter
P-60-1/2
P-60-3/4
1/2 in. N.P.S. plug
3/4 in. N.P.S. plug
P-60-1
P-60-1-1/4
1 in. N.P.S. plug
1-1/4 in. N.P.S. plug
P-60-DS*
Hinged lift lids
P-60-DU*
Duplex 1-7/16 in. lid
P-60-2*
P-60-2-5/8*
2 in. dia. plug
2-5/8 in. dia. plug
P-60-1/2-2*
P-60-3/4-2*
1/2 in. & 2 in. dia. plugs
3/4 in. & 2 in. dia. plugs
P-60-DR*
P-60-GFCI*
Duplex lift lid
For GFCI Devices
4 in.
30º
3-3/8 in.
3/16 in.
Description
Cat. No.
P-60-1/2
P-60-1/2-AL
P-60-3/4
P-60-3/4-AL
P-60-1
P-60-1-AL
P-60-1-1/4
P-60-1-1/4-AL
P-60-2
P-60-2-AL
P-60-2-5/8
P-60-2-5/8-AL
P-60-1/2-2
P-60-1/2-2-AL
P-60-3/4-2
P-60-3/4-2-AL
P-60-DR
P-60-DS
P-60-DS-AL
P-60-DU
P-60-DU-AL
P-60-GFCI
P-60-GFCI-AL
1/2 in. N.P.S. Plug Size
3/4 in. N.P.S. Plug Size
1 in. N.P.S. Plug Size
1-1/4 in. N.P.S. Plug Size
2 in. Diameter Plug Size
2-5/8 in. Diameter Plug Size
1/2 – 2 in. Diameter Plug Size
3/4 – 2 in. Diameter Plug Size
With Duplex Lift Lid
For Duplex with Individual Lift Lids
With Two 1-7/16 in. Plugs for Duplex
For GFCI Devices
Finish
Std.
Ctn.
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
4
Brass
Aluminum
Brass
Aluminum
Brass
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
68P-FL or 68P-FL-AL required to attach cover plates to 68-P floor box
New MopTiteTM Covers exceed UL watertight requirements for 514A, 514C
For replacement parts, please refer to pages C89 – C90
*Also includes steel seating plate for receptacles
C36
w w w.t nb.c a
Floor Boxes
Flush Service Floor Boxes
Dual-Voltage Kits for 68-P Nonmetallic Series
•Voltage divider has easy-cut score lines to accommodate
concrete depths of 3 to 6 inches
Solid Brass Cover
with “Snap-Lock”
Lid
•Faceplate has removable data plates and can accommodate
GFCI or standard duplex receptacles
•Kit comes equipped with 4 standard keystone-size openings
in the data plates. Other styles available include openings
sized for Ortronics, Avaya, Panduit and Hubbell®
•MopTiteTM cover uses a “Snap-Lock” to close the lid. No
screws to turn... just push down the lid and it snaps in place.
The cover uses a factory-installed gasket and exceeds all UL
scrub-water exclusion requirements for carpet, wood and tile
floors
•MopTiteTM cover available in solid brass or aluminum
•Includes everything required for a standard installation
(68P floor box, data jacks and receptacles not included)
Cat. No.
Mounting Ring with
“Press-Fit” barbs
68P-DV-KIT-BRS
68P-DV-KIT-AL
68P-DV-DP-ORT *
68P-DV-DP-PAN *
68P-DV-DP
Dual-voltage
divider
w w w. t nb. c a
Description
With Brass Cover
With Aluminum Cover
Std.
Ctn.
1
Ortronics Data Plate to Accommodate 2 Jacks
PANDUIT Data Plate to Accommodate 2 Jacks
Standard Data Plate to Accommodate
4 Keystone Jacks
10
*CSA not Certified. Keystone data plates come standard with the kit. Other style data plates
are available from T&B and can be ordered separately
C37
Floor Boxes
Round Floor Boxes
Round Floor Box System
Features
• Nonmetallic PVC construction, watertight gasket and corrosion-resistant hardware assure
long life and reliable performance even in harsh and/or corrosive environments
•
•
•
•
Covers are available for a variety of applications
The same box depth simplifies ordering and reduces inventory
For carpet and tile applications
Cover options include: Brass, Stainless Steel and Nonmetallic (Ivory, Caramel, Taupe, Slate
and Brown)
• Concrete tight and suitable for any on-grade/below grade application; concrete or wood
floor construction approved
• Y-connector (E972Y) allows you to feed parallel runs of 3/4 in. conduit or to feed in/out
from the same side for increased wiring and faster installation
• PVC molded hubs and reducer plugs included
• Accepts 1/2 in., 3/4 in. and 1 in. conduit, tubing or raceway
• UL scrub-water tested, approved for all types of finished flooring
Three-way versatility for power, data and
communications
Carlon® Round Floor Boxes give you the same cost-saving
advantages over metal boxes as our rectangular boxes. By letting
you combine power, data and communications in the same box,
you can dramatically reduce your installation time and cost
compared to other nonmetallic boxes.
In addition, multi-use covers mean fewer SKUs to deal with and
greater jobsite flexibility to increase your savings further. Take a
closer look at all the advantages for yourself.
C38
w w w.t nb.c a
Floor Boxes
Flush Service Floor Boxes
Features
• Carlon® round Floor Boxes allow for various thickness of concrete pours. Trim out is easy – just use a handsaw to
cut off box at desired height to accommodate carpet, tile or other flooring
• Carlon leveling ring guarantees a level top every time, even if the box is tipped slightly during the pouring process
6.11 in.
5.03 in.
0.25 in.
4.00 in.
Cat. No.
6.44 in.
6.00 in.
Internal
Volume
(cu. in.)
90.0
E971FB (15.5 per inch
of depth)
Min.
Concrete Hubs
Depth (in.)
3-1/2
Reducer
Plugs
(2) 1 in. (2) 1 in. x 3/4 in.
and
and
(2) 3/4 in. (2) 3/4 x 1/2 in.
Std.
Std.
Ctn.
Ctn.
Qty. Wt. (lb.)
10
15.6
4.00 in.
Accessories
Multi-Service Divider Kit
Multi-Service divider kit for separate power, data and communications
compartments provides unbeatable flexibility and money-saving installation
speed. For use with nonmetallic boxes only.
Cat. No.
Std. Ctn.
Wt. (lb.)
3
Std. Ctn. Qty.
E973K
10
3/4 in. Y Fitting
The 3/4 in. Y Fitting provides for in and out service from a single 1 in.
port and allows for two 3/4 in. parallel conduit runs to adapt into a single
conduit body port.
Cat. No.
Std. Ctn.
Wt. (lb.)
2.1
Std. Ctn. Qty.
E972Y
10
Reducer Plugs
Cat. No.
E971C
E971D
w w w. t nb. c a
Size
(in.)
Std. Ctn. Qty.
Std. Ctn.
Wt. (lb.)
3/4 x 1/2
100
2.1
1 x 3/4
100
3.2
C39
Floor Boxes
Round Floor Boxes
Nonmetallic Covers
•High impact-resistant thermoplastic
•Compatible with standard NEMA Duplex and 1-1/4 in. N.P.S. receptacles
•Drill points (3/8 in.) provided for low-voltage cable pass throughs
•1-1/4 in. N.P.S. plugs may be modified to accept smaller fittings (3/8 in., 1/2 in. and 3/4 in.)
•For carpet and tile applications
•Scrub-water tested
•Approved for all types of finished flooring
Duplex Covers
Cat. No.
E97DSI
E97DSC
E97DST
E97DSS
E97DSB
Colour
Std. Ctn. Qty.
Ivory
5.2
Caramel
Taupe
Std. Ctn. Wt.
(lb.)
5.7
10
5.7
Slate
5.6
Brown
5.8
1-1/4 in. N.P.S. Covers
Caramel
Slate
Taupe
Ivory
Cat. No.
Colour
E97SSRB
E97SSRC
E97SSRS
Caramel
Std. Ctn. Qty.
Std. Ctn. Wt.
(lb.)
10
3.8
Brown
Slate
Brown
Clear Cover Carpet Ring
Cat. No.
Colour
Std. Ctn. Qty.
Std. Ctn. Wt.
(lb.)
E97CCR*
Clear
10
1.2
*Not CSA applicable
C40
w w w.t nb.c a
Floor Boxes
Round Floor Boxes
Features
•
•
•
•
•
•
•
•
Screws concealed under doors
Rugged construction
Coated with a light lacquer finish for extra protection
Resistance to wear – suited for high traffic areas
Gasketed for watertight applications
Available in four styles – Single Door, Two Door, N.P.S. opening and Two Door Dual Service
For carpet and tile applications
Scrub-water tested
NOTE: Carlon® metal cover adapter ring (E97ABR2) is required with these covers (sold separately)
Two Door Dual Service
(Divider Kit included)
Two Door
Single Door
Devices
Std. Ctn. Qty.
Std. Ctn. Wt.
(lb.)
Duplex and two Data Ports
5
9.2
Material
Devices
Std. Ctn. Qty.
Std. Ctn. Wt.
(lb.)
E97BR2
E97SS2
Brass
Stainless Steel
Duplex
5
7
7.7
Cat. No.
Material
Devices
Std. Ctn. Qty.
Std. Ctn. Wt.
(lb.)
GFCI and Duplex
5
Cat. No.
Material
E97BR2D
E97SS2D
Stainless Steel
Cat. No.
E97BR
E97SS
Brass
Brass
Stainless Steel
7
7.9
N.P.S. Opening
Cat. No.
Material
Devices
Std. Ctn. Qty.
E97BRG
E97SSG
Brass
Stainless Steel
1-1/4 in. Outlet and Single
Receptacle
5
Std. Ctn. Wt.
(lb.)
7.5
8.1
Metal Cover Adapter Ring
w w w. t nb. c a
Cat. No.
Description
Std. Ctn. Qty.
Std. Ctn. Wt.
(lb.)
E97ABR2
One-Piece Metal Cover Adapter
10
3.3
C41
Floor Boxes
Recessed Service Floor Boxes
68R Recessed Covers
Plug in power and communication cords and then close the lid to hide
unsightly plugs and receptacles below the floor!
•Unique cover provides aesthetic recessed service with cost-effective
box options for concrete, wood sub-floor and raised-floor
applications
•Lid can be rotated to expose a small opening for cords, enabling the lid
to close flush with the floor while in use
•Cover accepts one duplex or GFCI receptacle – no special device plates
required (receptacle purchased separately)
•Cover accepts up to two communications jacks – includes one 2-port
keystone data plate and one blank data plate for custom cut-outs or
power-only applications (communications jacks purchased separately)
Concrete applications
•Nonmetallic covers are available in black, grey, beige and brown
Black covers are available with an optional brass or aluminum flange
•Two set screws lock the cover in place – no gluing required
Wood sub-floor/raised floor applications
Use an appropriate Iberville®
3 in. x 2 in. Metal Switch Box with mounting ears
Use a Steel City®
Round PVC Floor Box,
catalogue number 68-P
(purchased separately)
6-3/4 in.
5/32 in.
3-3/8 in.
4-3/4 in.
Lid closes flush with the floor, even with cords plugged in
C42
w w w.t nb.c a
Floor Boxes
Recessed Service Floor Boxes
68R Recessed Covers (cont’d)
Cover kit includes:
•Cover assembly
•Receptacle mounting plate
•Duplex receptacle insert
•2-port keystone data plate
•Blank data plate
•Voltage divider
Technical Specifications
6 in. Minimum Concrete
Depth at Box Location
Important Application Note:
When using the 68R Recessed Cover with the 68-P floor box for concrete applications, the entire box
depth (6 in.) is required. Prior to concrete pour, level the top of the box with the screed line of the concrete.
Cat. No.
68R-CST-BLK
68R-CST-GRY
68R-CST-BGE
68R-CST-BRN
68R-CST-BRS
68R-CST-ALM
w w w. t nb. c a
Finish
Std.
Ctn.
Black
Power and Communications
Grey
Beige
Brown
4
Black with Brass Flange
Black with Aluminum Flange
C43
Floor Boxes
Flush Service Floor Boxes
Multi-Gang Floor Boxes for Power and Communications
Features – 640P Series Nonmetallic Floor Boxes
•
•
•
•
•
•
•
Concrete Cap
Significant savings over metal boxes
Die-cast adjusting frame with unique “Snap-On” feature which eliminates gluing
Reduced installation time; no leveling required
Compatibility with standard-schedule PVC conduit : 1 in., 3/4 in. and 1/2 in.
Removable adjusting frame accepts wide variety of service accessories
One-piece housing unit with premolded conduit holes
Molded from a high-grade polymer material which is fully compatible with standardschedule PVC conduit
• 640P Series Floor Boxes utilize both plastic and brass covers (P64 Series)
• Available in one-, two- and three-gang versions. Two- and three-gang boxes provided with
partitions in corresponding activation kits.
640P Series Nonmetallic
Floor Box (641P)
Reducers
Carpet Activation Kit for 640P Series
Carpet Flange
Wedge Clip
Adjusting Frame
Tile Activation Kit for 640P Series
Tile Flange
Ground Screw
Limit Clips
C44
• Min. concrete pour 2-1/2 in.
Description
Cat. No.
641P
642P
643P
One-gang Box
A
4
Two-gang Box
7
Three-gang Box
Dimensions (in.)
B
C
5-3/8
6
Max.
Volume
Std.
Ctn.
85.0 cu. in.
10-3/8
85.5 cu. in.*
1
*Per gang
Carpet
Activations
Cat. No.
Tile
Activations
Cat. No.
641P-CACA
641P-CACB
641-CAC-BGE*
641-CAC-BLK
641P-CAC-GRY
642P-CACA
642P-CACB
642-CAC-BGE*
642-CAC-BLK
642P-CAC-GRY
643P-CACA
643P-CACB
643-CAC-BGE*
643-CAC-BLK
643P-CAC-GRY
641P-TACA
641P-TACB
641-TAC-BGE
641-TAC-BLK
641P-TAC-GRY
642P-TACA
642P-TACB
642-TAC-BGE
642-TAC-BLK
642P-TAC-GRY
643P-TACA
643P-TACB
643-TAC-BGE
643-TAC-BLK
643P-TAC-GRY
Description
One-Gang
Finish
Std.
Ctn.
Aluminum
Brass
Beige
One-Gang, Nonmetallic
Black
Grey
Two-Gang
Aluminum
Brass
Beige
Two-Gang, Nonmetallic
4
Black
Grey
Three-Gang
Three-Gang, Nonmetallic
Three-Gang, Nonmetallic
Aluminum
Brass
Beige
Black
Grey
* Not CSA Certified
w w w.t nb.c a
Floor Boxes
Flush Service Floor Boxes
MopTite™ Cover Plates for 640 Series
4-1/2 in.
3-1/2 in.
3 in.
Description
Cat. No.
2-1/8 in.
3/16 in.
Plate Dimensions
P-64-3/4-AL
P-64-2-5/8
P-64-2-5/8-AL
3/4 in. & 2 in. dia. plugs
2-5/8 in. dia. plug
2-5/8 in. dia. plug
P-64-DU
P-64-GFCI
P-64-1/2
P-64-3/4
Duplex 1-7/16 in.
plug
Cover Plate GFCI
Flip Lid
1/2 in. N.P.S. plug
3/4 in. N.P.S. plug
P-64-1
P-64-1-1/4
P-64-2
P-64-1/2-2
1 in. N.P.S. plug
1-1/4 in. N.P.S. plug
2 in. dia. plug
1/2 in. & 2 in. dia. plugs
P-64-1/2
P-64-1/2-AL
P-64-3/4
P-64-3/4-AL
P-64-1
P-64-1-AL
P-64-1-1/4
P-64-1-1/4-AL
P-64-2
P-64-2-AL
P-64-1/2-2
P-64-1/2-2-AL
P-64-3/4-2
P-64-3/4-2-AL
P-64-2-5/8
P-64-2-5/8-AL
P-64-DU
P-64-DU-AL
P-64-DS
P-64-DS-AL
P-64-GFCI
P-64-GFCI-AL
1/2 in. N.P.S. Plug
3/4 in. N.P.S. Plug
1 in. N.P.S. Plug
1-1/4 in. N.P.S. Plug
2 in. UN Plug
1/2 & 2 in. UN Plug
3/4 & 2 in. UN Plug
2-5/8 in. UN Plug
Duplex 1-7/16 in. Plugs
Duplex Lift Lid
GFCI Flip Lid
Finish
Std. Ctn.
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
4
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
Brass
Aluminum
New MopTiteTM Covers exceeds UL Scrub-water exclusion requirements
MopTiteTM Nonmetallic Covers for 640 Series
Hold-Down Screws
Floor Plate
w/Removable
Plug Insert
•Polished brass finish
•Furnished complete with sealing gasket and # 8-32 x 7/16 in. screws
•3 in. x 4-1/2 in. outside dimension
Gasket
Receptacle
Seating Plate
Floor Box
Edge Trim
Description
Cat. No.
P-64-P-URC-BLK
P-64-P-URC-GRY
P-64-P-URC-BGE
P-64-P-BP-BLK*
P-64-P-BP-GRY*
P-64-P-BP-BGE*
Colour
Std. Ctn.
Black
Universal
Grey
Beige
Blank
4
Black
Blank
Grey
Blank
Beige
4
* Not CSA Certified
New MopTiteTM Covers exceeds UL scrub-water exclusion requirements
w w w. t nb. c a
C45
Floor Boxes
Concealed Service Floor Boxes
663 Series Floor Box
•Multiple service floor box that delivers power, communications and
data from standard conduit with no exposed service fitting
•Result: Open office planning flexibility
•Ideal for workstations that require power, communications
and data service
•Stamped steel, concrete-tight, semi-adjustable
•Electro-galvanized body and hardware
•Shipped complete with expendable cap to prevent ingress of concrete
663-SC
•Blank- and duplex-face plates can be mounted at either end of the box
•Does not include duplex faceplate; faceplate is included with P-62-CP
and P-60-3B cover plates
•Use P-62 and P-60 Series covers*
Engineering Data — 663 Series
Dimensions (in.)
Cat. No.
663-SC
A
B
C
3-5/8
4-11/16
8-13/16
Before
After
Pour Adj. Pour Adj.
(in.)
(in.)
None
3/4
Maximum
Capacity
(cu. in.)
Covers
and carpet
Plates
25 per Gang
90 Total
P-62 Series
P-60 Series
Maximum Conduit
KO’s (in.)
Sides
Bottom
(2) 1-1/4
(3) 3/4
None
Wiring
Device
Std.
Ctn.
Duplex
and/or
Data/Voice
4
*P-62-TAR is required when using P-60 Series covers
Caution: to abandon 663 you must use a P-60 Series brass cover plate
C
A
B
Faces Plates for 663 Floor Box
Cat. No.
P-60-Q
P-60-QB
C46
Description
Duplex receptacle plate for 663 floor box
Blank plate for 663 floor box
Std.
Ctn.
4
w w w.t nb.c a
Floor Boxes
Concealed Service Floor Boxes
Covers, Carpet Plates and Adjusting Rings for 663 Floor Box
•Polished brass finish with nonmetallic bronze insert.
•Plastic insert has one 7/8 in. cut-out and two 1/2 in. cut-outs.
•Furnished complete with sealing gasket, 8-32 x 7/16 in. brass screws
and one P-60-Q device plates.
P-60-3B
•Split cover sections have access notch for screwdriver lift.
P-60-CP
P-62-TAR
•Polished brass finish
•Gives 3/4 in. adjustment when mounted on 663 floor box
•Furnished complete with 8-32 x 1 in. brass screws
•Accepts P-60-3B, P-60-CP and all P-60 Series cover plates
•P-62-TAR is required when used on 663 floor box
•5-11/16 in. outside diameter
Description
Cat. No.
Cover Plate – Includes 1 - P-60-Q
P-60-3B•1
P-60-CP
P-60-CP-AL
P-62-TAR
P-62-TAR-AL*
Finish
Std.
Ctn.
Brass
Polished Brass
Carpet plate
Aluminum
4
Polished Brass
Flange and adjusting ring for 663
Aluminum
* Not CSA Certified
• For use as cover only when box in service
1 When not in use replace P-60-3B Cover Plate with 697 Plug
Caution: These covers are not to be used in high traffic areas
•High strength polycarbonate
•Molded support ribs for extra strength
•Furnished with one 7/8 in. cut-out and two 1/2 in. cut-outs and P-60-Q
device plate
•5-5/8 in. outside diameter
P-62-CP-BRN
Cat. No.
P-62-CP-AS•2
P-62-CP-BRN•2*
P-62-CP-G•2*
•Furnished with 3-12-24 x 1 in. screws
Description
Colour
Std.
Ctn.
Charcoal
Polycarbonate cover and carpet plate – Includes 1 - P-60-Q
Brown
4
Gold
* Not CSA Certified
• For use as cover only when box in service
2
When not in use the P62CP Series cover should be replaced by P60CP, P60 and P62 Series covers
Caution: These covers are not to be used in high traffic areas
w w w. t nb. c a
C47
Floor Boxes
Recessed Service Floor Boxes
664 Series Floor Box
Multiple-Service Floor Boxes for Power,
Communications and Data
Multiple-service floor boxes deliver power, communications and data from
standard conduit with no exposed service fittings. Result: Open office
planning flexibility. Ideal for the modern office with workstations that have
power, communications and data equipment.
Power receptacles and low-voltage connections can be enclosed underfloor
in either steel or cast-iron bodies. Galvanized 14-gauge steel boxes are
provided with knockouts from 3/4 in. to 1-1/4 in. Cast-iron bodies have
threaded openings for 3/4 in. and 1 in. conduit.
•Two-compartment boxes are available in three types: stamped steel
(664-SC), shallow (664-S) and cast iron (664-CI)
•Durable nonmetallic covers include a steel reinforcement plate for
added strength
•New! Metallic covers in solid brass and aluminum provide aesthetics
and durability
Std.
Ctn.
Description
Cat. No.
664-SC
Stamped-Steel Box which Accepts
Two Plates, One Duplex Plate Provided
664-CI
Cast-Iron Box which Accepts
Two Plates, One Duplex Plate Provided
664-S
Shallow Stamped-Steel Box which Accepts
Two Plates, One Duplex Plate Provided
•Four leveling screws enable quick leveling to desired concrete depth
•Cover flange self-levels with the finished floor for easy installation
4
When ordering a 664 Series box, the cover must be ordered separately, see page C50
For communications accessories, see page C85
664-CI
C
B
664-S
A
664-SC
Engineering Data — 664 Series
Dimensions (in.)
Cat. No.
Before
After
Pour Adj. Pour Adj.
(in.)
(in.)
Maximum Standard Maximum Conduit
Tapping (in.)
Capacity Conduit
(cu. in.)
Tapping W/Bushing W/O Bushing
Conduit KOS
Covers
Sides
Bottom
–
(4) 1in. – 1-1/4 in.
(4) 3/4
None
664-CST
Series
1
1-1/2
–
–
664-CST
Series
–
–
(6) 3/4 in.
None
664-CST
Series
A
B
C
664-SC
3-3/4
4-11/16
10-1/4
2-1/2
3/4
24 per gang
90 total
–
–
664-CI
3-3/4
5-3/32
9-15/16
2-1/2
3/4
24 per gang
90 total
(4) 3/4 in.
(4) 1 in.
664-S
2-7/8
4-11/18
10-1/4
1-1/2
3/4
16.5 per gang
70 total
–
Caution: When using the center side KOs, Catalogue Number 664-RP must be assembled to the box prior to installing the conduit
C48
w w w.t nb.c a
Floor Boxes
Recessed Service Floor Boxes
Metallic Covers for 664 Series Floor Boxes
664-CST-SW-BRS
664-CST-SW-ALM
Solid Brass
Solid Aluminum
664-CI
664-S
664-SC
Cast Iron for Slab or Grade Applications
For Shallow Concrete Applications
Stamped Steel for General Purpose
Cord Opening
8-3/8 in.
1/4 in.
5-1/2 in.
1-1/8 in.
Lid Rotated 180º to expose Cord Opening.
MopTiteTM Covers meet UL scrub-water exclusion requirements for carpet, tile and wood
Cat. No.
664-CST-SW-BRS
664-CST-SW-ALM
w w w. t nb. c a
Finish
Load Rating
(lb.)
Std.
Ctn.
Solid Brass
2,250
1
Solid Aluminum
2,250
1
C49
Floor Boxes
Recessed Service Floor Boxes
Nonmetallic Covers for 664 Series Floor Boxes
•Duplex receptacle face plate for 664 Series floor box for
additional power service
•Does not include duplex
664-CST-SW-BLK
664-BP
664-CST-SW-BRN
5/32 in. Steel Top Plate on lid, carpet
or tile can be glued to top plate.
Std.
Ctn.
Blank Plate
GFCI Receptacle Plate
4
Duplex Receptacle Plate
Caution: When using the center side KOs, all 664 plates must be assembled
to the box prior to installing the conduit
664-CST-SW-GRY
664-CST-SW-BGE
664-RP
Description
Cat. No.
664-BP
664-GP
664-RP
664-GP
Device Plates – 664-S
0.188 in.
Flange height
A
4.012 in.
5.125 in.
664-S-RP
664-S-BP
0.845 in.
8.125 in.
Description
Cat. No.
Cover lid
664-S-RP
664-S-BP
Cover frame
Duplex Receptacle Plate
Std.
Ctn.
4
Blank Plate
Wire Tunnel for 664 Series
Cord door locks
open or closed
•Wire tunnel for protecting electrical connections between the
two duplex receptacles when the box is used for power/power
application
MopTiteTM covers meet UL scrub-water exclusion
requirements for carpet, tile and wood
Cat. No.
664-CST-SW-GRY
664-CST-SW-BRN
664-CST-SW-BGE
664-CST-SW-BLK
Colour
Load Rating
(lb.)
Std.
Ctn.
Grey
1,500
1
Brown
1,500
1
Beige
1,500
1
Black
1,500
1
Material: Polycarbonate with 5/32 in. steel plate
(see page C49 for metallic cover options)
C50
664-WT
Cat. No.
664-WT
664-S-WT
664-S-WT
For Use With
Std.
Ctn.
664 and 664-CI Floor Boxes
4
664-S Floor Box
4
w w w.t nb.c a
Floor Boxes
Recessed Service Floor Boxes
665 Series Floor Boxes: 665SC
•For concrete application
•The 665 line is an extension of the industry-leading 664 Series; our
concealed service line now allows the customer to install up to four
device panels in one box
3 in.
Device
Compartment
12-1/8 in.
•Through the use of a unique nonmetallic wire tunnel, the installer can
easily partition the power, voice/data requirements
•Four (4) device compartments can accommodate any combination of
devices. For example: (3) duplex power devices and (1) duplex
telephone device, or (2) voice and data connectors and (1) GFCI device
and (1) blank, etc.
5-7/8 in.
•Overall height of 3-1/2 in. allows for shallow pours when needed
12-1/8 in.
•High-Strength polycarbonate cover with a 5/32 in. steel plate assures
structural integrity
Top View
•Metallic Covers also available in solid brass and aluminum
1-1/4 in.
KO
•Four-side feed-through allows installer to feed through power or
data/com service from any orientation
3/4 in. KO
•Nonmetallic wire tunnels aesthetically clean. Full-width tunnel provides
maximum feed-through capacity; nonmetallic material prevents
conductor damage
•Total access area of 126 cu. in. allows for friendly installation of
workstation cables
•Contains 28 knockouts (16 – 1-1/4 in. and 12 – 3/4 in. KOs) that
provide increased flexibility when installed
•This CSA Listed, stamped-steel floor box can be installed with
Thomas & Betts voice and data connector products
Bottom Plate
•Four 2-1/2 in. levelling screws provided with all boxes
•Device panels ordered separately
3-1/2 in.
2-1/2 in.
3/4 in. Knockout
1-1/4 in.
1-1/4 in. Knockout
Cat. No.
665-SC
Length
Width
Height
Area
Device
Access
Area
5-3/4
2-3/4
2-1/2
40 cu. in.
126 cu. in.
Device Compartments (in.)
Std.
Ctn.
1
665-SC floor box does not include device plates or covers. Order separately
Material: Pre-Galvanized Steel
w w w. t nb. c a
C51
Floor Boxes
Recessed Service Floor Boxes
665 Series Floor Boxes: 665-CI
Cast Iron for Slab-On-Grade Applications
The new Steel City® 665 Cast Iron Floor Box provides a high-capacity power and data solution
for ground-floor installations. This 4-gang recessed-service floor box is ideal for concrete
slab-on-grade applications. Removable voltage dividers enable users to customize wiring
configurations by feeding two or more adjacent compartments with a single conduit. Aesthetic
covers feature a recess to accept floor covering to match the surrounding floor.
•4-gang, recessed service for a high-capacity
aesthetic floor-box solution
14.81 in.
3/4 in.
NPT
•Removable voltage dividers between
compartments enable a single conduit to feed
two or more adjacent compartments
1-1/4 in.
NPT
•Heavy-duty, nonmetallic covers with steel
reinforcement plates are available in a wide
variety of colours to match any decor (black,
grey, brown and beige)
7.94 in.
Inside Square
14.81 in.
•Metallic Covers.
3/4 in.
NPT
3/4 in.
NPT
•Separate cord door in the cover latches firmly
in the open position to prevent damage to
cables
1-1/4 in.
NPT
1-1/4 in.
NPT
•MopTite covers meet UL scrub-water
exclusion requirements for carpet, tile and
wood
TM
Access
6-5/8 in.
•Largest cubic-inch capacity of any cast iron
recessed 4-gang floor box
•Inline 1-1/4 in. hubs allow high-capacity
straight runs for communication wiring
Top View
3/4 in.
NPT
5/8 in.
Specifications
•Material: Box – Cast Iron Cover –
Polycarbonate with steel reinforcement plate
Side View
•Listing: CSA and UL Listed
Cat. No.
665-CI
2.50 in.
Device Compartments (in.)
Length
Width
Height
Area
5-3/4
2-3/4
2-1/2
40 cu. in.
Device Access Area
Std.
Ctn.
126 cu. in.
1
665-SC floor box does not include device plates or covers. Order separately
C52
w w w.t nb.c a
Floor Boxes
Recessed Service Floor Boxes
665 Series Floor Boxes: 665-AV2
2 KOs for Audio Visual Applications
•For concrete application
•2 KOs enable pre-terminated AV cables and connectors to be pulled
directly through the conduit
•Accepts standard 665 Series covers and device plates for power, voice,
data and audio visual connections
•Decora® style adapters allow voice, data and AV connectors to be
mounted in a standard GFCI device plate
•Keystone style voice, data and AV connectors meet a wide range
of low-voltage applications. All connectors are recessed for flush
mounting in floor box applications.
•Device plates are available that accept Extron® MAAP plates to
accommodate any AV requirements (Extron® MAAP plates purchased
from an authorized Extron distributor)
Decora® Adapters and Keystone Inserts for GFCI Device
Plates. (Not included)
•Metallic covers provide a durable, aesthetic installation, including
industry-exclusive solid brass covers (not painted or plated,
aluminum also available)
Std.
Ctn.
Description
Cat. No.
665-AV2
4-Compartment Recessed Service Floor Box with 2 in. KOs for AV Applications
1
665-AV2 floor box does not include device plates or cover. Order separately. (see page C64)
Decora® is a registered trademark of Leviton Manufacturing Co., Inc.
Extron® is a registered trademark of RGB System, Inc.
For communication accessories, see page C85
1/4 in. KO
3/4 in. KO
12-1/2 in.
4-1/2 in.
14 in.
3-9/16 in.
1-25/32 in.
2 in. KO
Engineering Data — 665-AV2
Cat. No.
Before
Pour Adj.
(in.)
After
Pour Adj.
(in.)
665-AV2
2-1/2
3/4
w w w. t nb. c a
Compartment Size & Capacity (Qty. = 4)
Conduit KOs (in.)
Length (in.)
Width (in.)
Height (in.)
Volume
Sides
Bottom
5-3/4
5-3/4
3-3/4
2-3/4
3-3/8
3-3/8
72 cu. in.
52 cu. in.
(4) 2
(8) 1-1/4
(8) 3/4
(2) 2
(2) 1-1/4
(4) 3/4
C53
Floor Boxes
Recessed Service Floor Boxes
Metallic Covers for 665 Series Floor Boxes
665-CST-SW-BRS
665-CST-SWR-BRS
665-CST-SW-ALM
665-CST-SWR-ALM
Solid Brass
Solid Brass with Recess for Floor Covering
Solid Aluminum
Solid Aluminum with Recess
for Floor Covering
9-5/16 in.
Cord Opening
5-7/16 in.
1/4 in.
1-1/16 in.
4-11/16 in. 9-5/16 in.
Lid Rotated 180º to Expose
Cord Opening
Optional 3/16 in. Recess for FLoor Covering
Description
Cat. No.
665-CST-SW-BRS
665-CST-SWR-BRS
665-CST-SW-ALM
665-CST-SWR-ALM
C54
Load Rating
(lb.)
Std.
Ctn.
1,500
1
Solid Brass
Solid Brass with Recess for Floor Covering
Solid Aluminum
Solid Aluminum with Recess for Floor Covering
w w w.t nb.c a
Floor Boxes
Recessed Service Floor Boxes
Nonmetallic Covers for 665 Series Floor Boxes
5/32 in. Steel Top Plate on Lid. Carpet
or Tile can be glued to Top Plate
Cover Lid
7-7/8 in.
Cord Door
Locks Open
or Closed
9 in.
9 in.
665-CST-SW-BLK
665-CST-SW-GRY
Black Nonmetallic Cover
Grey Nonmetallic Cover
3/16 in.
Polycarbonate Flange & Lid
7-7/8 in.
665-CST-SW-BGE
665-CST-SW-BRN
Beige Nonmetallic Cover
Brown Nonmetallic Cover
Cover Frame
1-1/16 in.
Colour
Cat. No.
665-CST-SW-BLK
665-CST-SW-GRY
665-CST-SW-BGE
665-CST-SW-BRN
3/16 in. Deep Recess
for Floor Covering
Description
Std. Ctn.
Nonmetallic Cover for
665 Series Floor Boxes
1
Black
Grey
Beige
Brown
Material: Polycarbonate with 5/32 in. steel plate
Furnished with (4) #8-32 x 5/8 in. mounting screws
Devices Plates and Accessories for 665 Series Floor Boxes
5-3/4 in.
1-5/16 in.
1 in.
2-5/8 in.
2-1/8 in.
665-GP
6-1/2 in.’
665-RP
665-RP
665-GP
Duplex Plate
665-BP
665-STEL
665-6RJ
6-1/2 in.
GFCI Plate
Cat. No.
665-BP
665-6RJ
Blank Plate
Data Plate for 6
Keystone Jacks
665-WT
Wire Tunnel for 665-AV2 feeds multiple
compartments from a single conduit
(one included with each 665-AV2)
w w w. t nb. c a
1-1/4 Dia. Hole
665-RP
665-GP
665-BP
665-6RJ
665-WT
665-STEL*
665-WT
Description
Std. Ctn.
Duplex Plate for 665 Series
GFCI Plate for 665 Series
Blank Plate for 665 Series
Data plate for 665 Series, Accepts 6 Keystone Jacks
4
Replacement Wire Tunnel for 665-SC & 665-AV2
Telephone/data Plate for 665
*Not CSA applicable
Each box requires (4) device plates. Material: Pre-galvanized steel.
C55
Floor Boxes
Recessed Service Floor Boxes
667-SC Floor Box
• For concrete application
• Largest capacity concealed-service floor box on the market.
–Four “double-gangs” allow for two duplex receptacles per gang, for a total of eight
receptacles per box
– Each gang has 40 cu. in. of capacity
– Box interior has 128 cu. in. of capacity
• Standard box configuration is for up to eight power and/or low-voltage devices
– Box design allows for feed-through cabling for power and low-voltage conductors
• Shallow design
– 3 in. overall height is ideal for renovations and upper level floor installations
667-2RP
667-BP
Device Panel
(included)
Device Plate
(included)
• Full line of low-profile covers
– Utilizes same quality cover as AFM-8 Access Floor Module
– High-strength polycarbonate
– Steel reinforced for added durability
– Two receptacle cable exit ports
– 64 sq. in. opening provides easy access to device panels
– 1/4 in. recess for carpet/tile insert
Floor Box
Bottom
Leveling Screws and
Base Feet (included)
– Available in grey, black, brown and beige
• Box is manufactured with (1) 3/4 in., (3) 1 in. and (1) 1-1/4 in. KOs per gang.–
This includes a 1 in. and 1-1/4 KO located in the bottom
• Full complement of device panels
–Device panels available with one or two duplex openings, one or two GFCI openings,
six standard “keystone” with Omni 110 bezels and blanks
1-1/4 in. KO
• Provided with leveling legs and base feet
– Base feet can be attached to form preventing box movement during concrete pour.
– Leveling legs provide up to 1-1/2 in. pre-pour adjustment
1’ KO
• Manufactured from 14-gauge pre-galvanized steel
– Quality construction provides added durability and rust protection
•MopTite covers meet UL scrub-water exclusion requirements for carpet, tile and wood
TM
13 in.
9-3/4 in.
Floor Box Top
3/4 in. K.O.
3 in.
2 in.
1 in. K.O.
C56
Description
Cat. No.
667-SC
Std. Ctn.
Four-Gang Recessed Floor Box
4
Supplied with (1) 667-2RP for 2 duplex receptacles and (1) 667-BP Blank Plate. For covers and other device plates,
see page C57. For communications accessories, see page C85
w w w.t nb.c a
Floor Boxes
Recessed Service Floor Boxes
667-SC Floor Box
5/32 in. Steel Top Plate on Lid Carpet or Tile.
Can Be Glued to Top Plate.
10.63 in. Square
667-BP
0.188 in.
Flange Height
9.54 in. Square
667-RP
667-2RP
1.063 in.
667-CST-SW-XXX
Cover Lid
667-1G
667-2G
Cord Door Locks Open or
Closed
667-6RJ
Cover Frame
Description
Cat. No.
667-BP*
667-RP*
667-2RP*
667-1G
667-2G
667-6RJ**
667-CST-SW-GRY*
667-CST-SW-BLK*
667-CST-SW-BRN*
667-CST-SW-BGE*
Std.
Ctn.
Blank Device Panel
Single Duplex Receptacle Plate
Device Panel for 2 Duplex Receptacles with Duplex KOs
Device Panel for 1 GFCI Receptacle
Device Panel for 2 GFCI Receptacles
Device Panel for 6 Keystone Data Jacks
4
Cover and Flange – Grey
Cover and Flange – Black
Cover and Flange – Brown
Cover and Flange – Beige
* Not CSA Certified
** For data connectors and adapters, see pages C89 – C90
New MopTite Covers exceed UL scrub-water exclusion requirements
TM
w w w. t nb. c a
C57
Floor Boxes
Recessed Service Floor Boxes
668-S Ultra-Shallow Floor Box
The 668-S Ultra-Shallow Floor Box from Thomas & Betts provides a
high-capacity power and data solution for shallow concrete floors.
The low-profile 4-gang box is constructed of galvanized stamped
steel. Removable voltage dividers enable users to customize wiring
configurations by feeding two or more adjacent compartments with
a single conduit. Metallic covers with durable powder-coat finish are
designed to match any decor, while optional edge trims enable covers
to be mounted completely flush with the floor in tile or wood floor
applications.
13.25 in.
9.69 in.
inside
square
•Low profile (2-1/2 in. height) for shallow concrete pours
•4-gang, recessed service for a high-capacity, aesthetic floor box solution
•Stamped-steel box construction
•Removable voltage dividers between compartments enable a single
conduit to feed two or more adjacent compartments
11.82 in. inside
square
•Metallic covers feature durable powder-coat paint to match any decor
(black, grey, brown and beige)
15.25 in.
Top View
55 cu. in. compartment
2-places
•Heavy-duty cord door in the cover latches firmly in the open position to
prevent damage to cables
•Optional tile trim enables flush mounting for tile and wood floor
applications
41 cu. in. compartment
2-places
•MopTiteTM covers meet UL scrub-water exclusion requirements for carpet, tile and wood
•Largest cubic-inch capacity of any shallow, recessed 4-gang
floor box
Ground screw in each
compartment
•Additional KOs (up to 2 in.) on the bottom of the box enable
installation flexibility
Removable voltage
divider 4-places
1 in. knockout
2-places on bottom
•Custom device panels are available – contact your Regional Sales
Office about these offerings
3/4 in. knockout
4-places on bottom
2 to 1-1/2 in.
knockout
2-places on bottom
Top View – Compartment Layout
Note: shown with Top Plate Removed
3/4 in. knockout
1-place
each side
Specifications
•Material: Box – Galvanized Steel Cover – Die-Cast Zinc
•Listing: CSA and UL Listed
Cat. No.
668-S
2.00 in.
1 in. knockout
4-places each side
C58
Side View
Description
Shallow, concealed service Floor Boxes
Std. Ctn.
4
For covers and other device plates, see page C69
For communications accessories, see page C85
w w w.t nb.c a
Floor Boxes
Recessed Service Floor Boxes
Covers & Tile Trims for 668-S Floor Box
Standard mounting configuration: Flange on cover overlaps
carpet, tile or wood floors.
Flush mounting configuration. Optional trim ring allows
cover to be mounted flush with tile or wood floors.
0.125 in. Flange
0.312 in.
11.04 in.
Square
11.63 in.
Square
9.50 in.
Square
Cover
Edge Trim
Section A-A
668-CST-BLK
668-CST-BRS
Std.
Ctn.
Description
Cat. No.
668-CST-ALM
668-CST-BRS
668-CST-BLK
668-CST-BRN
668-CST-BGE
668-TRIM-ALM
Metal Cover – Aluminum Powder Coat
Metal Cover – Brass Powder Coat
1
Metal Cover – Black Powder Coat
Metal Cover – Brown Powder Coat
Metal Cover – Beige Powder Coat
668-TRIM-BGE
668-TRIM-BRS
Std.
Ctn.
Description
Cat. No.
668-TRIM-ALM
668-TRIM-BRS
668-TRIM-BLK
668-TRIM-BRN
668-TRIM-BGE
668-TRIM-BLK
Edge Trim – Aluminum Powder Coat
Edge Trim – Brass Powder Coat
4
Edge Trim – Black Powder Coat
Edge Trim – Brown Powder Coat
Edge Trim – Beige Powder Coat
CSA non applicable
Device Plates for 668-S Floor Box
668-S-1RP
668-S-1G
Description
Cat. No.
668-S-1RP
668-S-1G
668-S-BP
668-S-BP
668-S-6RJ
Std.
Ctn.
Single-Gang Duplex Plate
Single-Gang GFCI Plate
Blank Plate
1
Cat. No.
668-S-6RJ
668-S-6PAN
668-S-6ORT
668-S-6AVA
668-S-6PAN
668-S-6ORT
Description
Data Plate – 6 Keystone Jacks
Data Plate – 6 Panduit® Jacks
Data Plate – 6 Ortonics® Jacks
Data Plate – 6 Avaya® Jacks
668-S-6AVA
Std. Ctn.
1
4
CSA non applicable
w w w. t nb. c a
C59
Floor Boxes
Poke-Through Systems
Fire-Rated Poke-Through Systems
Capacity, Durability, Flexibility —
Everything You’ve Been Looking for in a Poke-Through.
FPT4
FFPT4
C60
w w w.t nb.c a
Floor Boxes
Poke-Through Systems
Fire-Rated Poke-Through Systems
Flush Power & Communications
FPT4 Series
•Maximum capacity and flexibility for
flush-mounted power and
communications devices, including
the popular 4 x 4 configuration
(4 power outlets, 4 communications
devices)
•Core Drill Size: 4 in.
FPT3 Series
FPT Flush Series
•Accommodates 1 duplex receptacle and 2 data
jacks
•Accepts 1 duplex
receptacle
•Core Drill Size: 3 in.
•Core Drill Size:
3 in.
Furniture Feed
FFPT4 Series
FFPT3 Series
FPT Furniture Feed Series
•2 Conduits Hubs: 3/4 in.
for power and 1-1/4 in. for communications
•Concentric 2 in. and 1-1/4 in.
hub for power and
communications
•3 Conduit Hubs: (2) 1/2 in. and (1) 3/4 in. for power
and communications
•Core Drill Size: 4 in.
•Core Drill Size: 3 in.
•Core Drill Size: 3 in.
Above Floor Pedestal
FPT Above-Floor Pedestals
•Available in 2 compartment and 4 compartment
for power and communications
•Core Drill Size: 3 in.
w w w. t nb. c a
C61
Floor Boxes
Modular Poke-Through System
FPT4 Series – Flush Power and Communications
The FPT4 Series provides everything you look for in a
flush poke-through — Capacity, Durability, Flexibility,
Accessibility and Aesthetics
NEW COVER DESIGN
LL
TOO
S
CES
AC
ESS
Capacity
Flexibility
•Four standard configurations:
–4 power receptacles + 4 communications
devices (4 x 4)
– 2 power receptacles + 6 communications
devices
– 8 communications devices
– 1 locking receptacle + communications
devices
•Core Drill Size: 4 in.
•Configurable design to meet any project
requirements:
– 4 standard configurations for power and
communications devices
– 20A receptacles can be wired as isolated
ground (orange labels provided)
– Communications plates available
to accommodate data jacks from
manufacturers
– Accepts Extron® MAAP plates for AV
components
•Threaded conduit hubs enable all
communications cabling to be enclosed
in a single conduit:
– Integral 1 in. hub on the 4 x 4 – no extra
parts needed!
– Optional hubs available for other
configurations
•Junction box features (5) 1/2 in. and
(5) 3/4 in. knockouts (27 cubic inch capacity)
Durability
•Solid brass or aluminum covers protect
devices from damage and debris when not in use – no exposed plastic components!
•Patented latching lid eliminates easily
damaged, hard-to-use locking screws.
Accessibility
•Full access to communications compartment
through the cover without exposing power
compartments – even after it’s installed in
the floor!
•“Straight-through” wiring of communications
cabling for easy installation and changes.
C62
Aesthetics
•The only 4 in. core poke-through for power
and communications with the entire cover
made of solid brass – features an aesthetic
brushed finish!
•Solid aluminum covers also available with brushed finish or powder-coated finishes in
black, grey, brown and beige to match any décor – the most colours in the industry!
w w w.t nb.c a
Floor Boxes
Flush Power and Communications
FPT4 Series – Poke-Through: 4 Power and Communications
• Four 20A Receptacles, two circuits, six 12 AWG wires, prewired, pigtail
ends in junction box (can be wired as isolated, labels provided)
Device Layout
• Keystone Communications Device Plate with four Keystone Category
5e Data Jacks – see page C65 for optional Communications Device
Plates for Compartment A
• Integral 1 in. threaded conduit hub for communication wiring
(cast iron)
Description
Cat. No.
FPT4-4P-4C-TBRS
FPT4-4P-4C-TALM
FPT4-4P-4C-TBLK
FPT4-4P-4C
Compartment A
Cable Entry
19 in.
Std. Ctn.
Brass Cover
Aluminum Cover
1/2 in. Threaded
Hub for Power
1
Black Cover
1 in. Threaded
Hub for Communications
Poke-Through Base (cover purchased separately)
FPT4 Series – Poke-Through: Covers
Brushed-Metal Finishes
Powder-Coat Finishes
7-1/2 in.
Description
Cat. No.
FPT4-CVR-TBRS
FPT4-CVR-TALM
FPT4-CVR-TBLK
FPT4-CVR-TBGE
FPT4-CVR-TBRN
Brass
Std. Ctn.
Black
Brushed Brass
Brushed Aluminum
4
Aluminum with Black Powder Coat Finish
Aluminum with Beige Powder Coat Finish
Aluminum with Brown Powder Coat Finish
Aluminum
Forged solid brass and aluminum covers.
Patented latching lid closes easily without the need for locking screws
Beige
Brown
FPT4 Series – Poke-Through: 2 Power and 6 Communications
• Four 20A Receptacles, two circuits, six 12 AWG wires, prewired, pigtail
ends in junction box (can be wired as isolated, labels provided)
• Includes Keystone Communications Device Plate with six Keystone
Category 5e Data Jacks – see page C65 for optional Communications
Device Plates for Compartment A and Compartment B
1 in. Threaded Hub
FPT4-CCH-6C
Cat. No.
Description
FPT4-2P-6C
Poke-Through Base Unit Only
(cover purchased separately)
FPT4-CCH-6C
Optional 1 in. Threaded Conduit Hub for
communications Wiring (cast iron)
w w w. t nb. c a
Std. Ctn.
Device Layout
Compartment A
Compartment B
Cable Entry
19 in.
1/2 in. Threaded
Hub for Power
1
Two 3/4 in. Thru-Holes
for Communications
C63
Floor Boxes
Flush Power and Communications
FPT4 Series – Poke-Through: 8 Communications
Cable Entry
Device Layout
Compartment B (Left)
Compartment B (Right)
Compartment A (Center)
Three 3/4 in.
Thru-Holes
for Communications
• Keystone Communications Device Plates with eight Keystone
Category 5e Data Jacks – see page C65 for optional
Communications Device Plates for Compartment A and
Compartment B
• No Junction Box
FPT4-CCH-8C
3-1/4 in.
(Cover purchased
separately)
1-1/4 in. Threaded
Hub
Std.
Ctn.
Description
Cat. No.
FPT4-8C
Poke-Through Base
(cover purchased separately)
1
FPT4-CCH-8C
Optional 1-1/4 in. Threaded Conduit Hub
for communications Wiring (cast iron)
4
FPT4 Series – Poke-Through: 1 Locking Receptacle and 2 Communications
• 20A Receptacle: pre-wired, three 12 AWG wires, pigtail ends in
junction box
• 30A Receptacle: pre-wired, three 10 AWG wires, pigtail ends in
junction box
Device Layout
• Cover purchased separately
• Includes Keystone Communications Device Plates with two
Keystone Category 5e Data Jacks – see page C65 for optional
Communications Device Plates for Compartment B
Compartment B
19-3/4 in.
1/2 in. Threaded Hub
for Power
Cable Entry
3/4 in. Thru Hole for
Communications
Cat. No.
Std.
Ctn.
Description
FPT4-1TL21-2C
Poke-Through Base, NEMA L5-20R, 20A/125V
Locking Receptacle, 2 Communications
Receptacles
FPT4-1TL22-2C
Poke-Through Base, NEMA L6-20R, 20A/250V
Locking Receptacle, 2 Communications
Receptacles
FPT4-1TL31-2C
Poke-Through Base, NEMA L5-30R, 30A/125V
Locking Receptacle, 2 Communications
Receptacles
FPT4-1TL32-2C
Poke-Through Base, NEMA L6-30R, 30A/250V
Locking Receptacle, 2 Communications
Receptacles
FPT4-CCH-2P
FPT4-CCH-2P
Optional 1/2 in. Threaded Conduit Hub for
communications Wiring (cast iron)
1
4
1/2 in. Threaded Hub
(Cover purchased separately)
C64
w w w.t nb.c a
Floor Boxes
Flush Power and Communications
FPT4 Series – Optional Communications Device Plates
Compartment A
Plates
FPT4-CPA-4SYS
Compartment B
Plates
FPT4-CPB-2SYS
FPT4-CPA-3PAN**
FPT4-CPB-2PAN**
FPT4-CPA-4KEY
FPT4-CPB-2KEY
Description
Cat. No.
FPT4-CPA-1MAAP
FPT4-CPA-4ORT
FPT4-CPB-1MAAP
FPT4-CPB-2ORT
FPT4-CPB-BLANK
FPT4-CPA-BLANK
Compartment
A-B Plate***
FPT4-CPAB-2MAAP
FPT4-CPA-4KEY
FPT4-CPA-4SYS
FPT4-CPA-3PAN**
FPT4-CPA-1MAAP
FPT4-CPA-40RT
FPT4-CPA-BLANK
FPT4-CPB-2KEY
FPT4-CPB-2SYS
FPT4-CPB-2PAN**
FPT4-CPB-1MAAP
FPT4-CPB-20RT
FPT4-CPB-BLANK
FPT4-CPAB-2MAAP
Std.
Ctn.
For 4 Keystone Jacks – Compartment A*
For 4 Systemax® Jacks – Compartment A
For 3 PANDUIT Jacks – Compartment A**
For Extron® MAAP Plate, Single Space – Compartment A
For 4 Ortronics® Jacks – Compartment A
Blank – Compartment A
4
For 2 Keystone Jacks – Compartment B*
For 2 Systemax Jacks – Compartment B
For 2 PANDUIT Jacks – Compartment B**
®
For Extron® MAAP Plate, Single Space – Compartment B
For 2 Ortronics® Jacks – Compartment B
Blank – Compartment B
For Extron® MAAP Plate, Double Space – Compartment A-B
CSA not applicable
Device Plate Only – no jacks included
* Keystone plates also accept Leviton® and Hubbell® devices
** Requires CMNZABL-X adapter from PANDUIT® to mount PANDUIT® MiniCom jacks
*** For use with FPT4-2P-6C and FPT4-8C Series only; replaces one Compartment A plate
and one Compartment B plate
Listed trademarks are owned by their respective companies.
FPT4 Series – Replacement Power Insert – 2 Receptacles
•For use with FPT4-4P-4C and FPT4-2P-6C Series Poke-Through Systems
Cat. No.
FPT4-2P-RPL
w w w. t nb. c a
Description
Replacement Power Insert with 18 in.
Wire Whip – Two 20A Receptacles
Std.
Ctn.
4
C65
Floor Boxes
Flush Power and Communications
FPT3 Series – Poke-Through: 2 Power and 2 Communications
This aesthetic, easy-to-use Poke-Through provides an ideal power and data solution – great
for new construction for upgrading existing 3 in. core installations.
• Capacity: 1 duplex receptacle and 2 data jacks (included)
• Core Drill Size 3 in.
• Durable solid brass or aluminum covers protect devices from damage and debris when not
in use – no exposed plastic components
• Powder-coated aluminum covers are available in black, grey, brown and beige to match any
décor – the most colours in the industry
• Brushed brass and aluminum finishes provide superior aesthetics
• Slide latches enable tool-less access to individual receptacles – eliminates the need for
hard-to-use locking screws
• Accepts Keystone, Leviton® or Hubbell® data jacks
• Junction box features (3) 1/2 in. and (4) 3/4 in. knockouts (13 cubic inch capacity)
• Includes (1) 20A duplex receptacle, pre-wired, pigtail ends in junction box
• Includes (2) Leviton CAT 5e data jacks
Cat. No.
Description
Std.
Ctn.
Poke-Through Base Unit
FPT3-2P-2C-BRS Brushed-Brass Cover
FPT3-2P-2C-ALM Brushed-Aluminum Cover
FPT3-2P-2C-BLK Black Powder-Coat Cover
FPT3-2P-2C
FPT3-CVR-BRS
FPT3-CVR-ALM
FPT3-CVR-BLK
FPT3-CVR-GRY
FPT3-CVR-BGE
FPT3-CVR-BRN
4
FPT3 Series Poke-Through Base Unit Only:
(Cover purchased separately)
Poke-Through Covers
Solid Brass, Brushed Finish
Solid Aluminum, Brushed Finish
Aluminum with Black Powder-Coat Finish
Aluminum with Grey Powder-Coat Finish
4
Cable Entry
Aluminum with Beige Powder-Coat Finish
Aluminum with Brown Powder-Coat Finish
See page C67 to view brushed metal and powder coat finishes
Slide latch to release
1 or 2 flip lids
Two 7/16 in. Thru-Hole
for Communications
16-1/4 in.
7/16 in. Conduit
for Power
Device Layout
7-1/2 in.
Slide latch to release
1 or 2 lids
C66
w w w.t nb.c a
Floor Boxes
Flush Power and Communications
FPT Flush Series – Poke-Through: 2 Power
The Steel City® FPT Poke-Through Series provides an economical solution
for installing a duplex receptacle in an existing floor – right where you
need it.
•Capacity: 1 duplex receptacle
•Core Drill Size 3 in.
•Brushed brass and aluminum covers provide superior aesthetics and durability
•Nonmetallic covers are available in black, grey, beige and brown
•Nonmetallic covers include openings for 3 communications cables
•Integral junction box features (5) 1/2 in. and (5) 3/4 in. knockouts
(27 cubic inch capacity)
•Assembled units include (1) 20A duplex receptacle, pre-wired with
pigtail ends in junction box
Cat. No.
FPT-449
FPT-450
FPT-445-SW-BLK
FPT-445-SW-GRY
FPT-445-SW-BGE
FPT-445-SW-BRN
FPT-445-SW-BRS
FPT-400B
Description
Std.
Ctn.
With Solid Brass Cover
With Solid Aluminum Cover
With Black Nonmetallic Cover
With Grey Nonmetallic Cover
With Beige Nonmetallic Cover
With Brown Nonmetallic Cover
With Brass Cover
FPT Poke-Through Base Unit Only (no duplex)
(Cover purchased separately)
5-3/4 in.
Device Layout
Metallic
Cover
7 in.
Nonmetallic
Cover
16 in.
Removable KOs for
Communication Cables
(Qty. = 3)
Cable Entry
1
Opening for
Communication
(Equivalent to Two
3/4 in. Conduits)
Opening for Power
(Equivalent to One
1/2 in. Conduit)
FPT Flush Series – Poke-Through Covers
•Nonmetallic covers feature openings for 3 communication cables
Cat. No.
FPT-CACP
FPT-CACP-AL
FPT-441-SW-BLK*
FPT-441-SW-GRY*
FPT-441-SW-BGE*
FPT-441-SW-BRN*
*Not CSA Certified
w w w. t nb. c a
Description
Std.
Ctn.
Solid Brass, Brushed Finish, 5-3/4 in. Diameter
Brushed-Metal
Finishes
Nonmetallic Colours
and Finishes
FPT-CACP
Solid Brass
FPT-441-SW-BLK
Black
FPT-441-SW-GRY
Grey
FPT-CACP-AL
Solid Aluminum
FPT-441-SW-BGE
Beige
FPT-441-SW-BRN
Brown
Solid Aluminum, Brushed Finish, 5-3/4 in. Diameter
Black, Nonmetallic, 7 in. Diameter
Grey, Nonmetallic, 7 in. Diameter
Beige, Nonmetallic, 7 in. Diameter
Brown, Nonmetallic, 7 in. Diameter
10
C67
Floor Boxes
Furniture Feed
FFPT4 Series Poke-Through
With limitations on the number of holes that can be drilled in a floor, it is
important to maximize the capacity of each location. The FFPT4 Series
provides high capacity for both power wiring and communications
cabling when feeding modular furniture — in a single-core drill location!
•Capacity: 3/4 in. hub for power wiring and 1-1/4 in. hub
communications cabling (plugs included)
•Core Drill Size 4 in.
•Solid brass and aluminum finishes provide superior aesthetics and durability
•Powder-coated aluminum covers are available in black, grey, brown
and beige to match any décor – the most colours in the industry
Cable Entry
•Integral junction box features (5) 1/2 in. and (5) 3/4 in. knockouts
(27 cubic inch capacity)
7-1/4 in.
3/4 in. Threaded
Hub for power
1-1/4 in. Threaded Hub
for Communications
18 in.
Cat. No.
Device Layout
1-1/4 in. conduit for
Communications
3/4 in. Conduit
for power
Description
FFPT4-BRS
FFPT4-ALM
FFPT4-BLK
With Black Powder-Coat Cover
FFPT4
FFPT4 Series Poke-Through Base Unit Only
(Cover purchased separately)
Std.
Ctn.
With Brushed-Brass Cover
With Brushed-Aluminum Cover
1
FFPT4 Series – Poke-Through Covers
Cat. No.
FFPT4-CVR-BRS
FFPT4-CVR-ALM
FFPT4-CVR-BLK
FFPT4-CVR-GRY
FFPT4-CVR-BGE
FFPT4-CVR-BRN
Description
Std.
Ctn.
Solid Brass, Brushed Finish
Solid Aluminum, Brushed Finish
Aluminum with Black Powder-Coat Finish
Aluminum with Grey Powder-Coat Finish
4
Aluminum with Beige Powder-Coat Finish
Aluminum with Brown Powder-Coat Finish
FFPT4 Series – Replacement Plug Kits
•Replacement plug kit includes (1) 3/4 in. and (1) 1-1/4 in. plugs
Cat. No.
FFPT4-RPK-BRS
FFPT4-RPK-ALM
FFPT4-RPK-BLK
FFPT4-RPK-GRY
FFPT4-RPK-BGE
FFPT4-RPK-BRN
Description
Std.
Ctn.
Solid Brass, Brushed Finish
Solid Aluminum, Brushed Finish
Aluminum with Black Powder-Coat Finish
Aluminum with Grey Powder-Coat Finish
4
Aluminum with Beige Powder-Coat Finish
Aluminum with Brown Powder-Coat Finish
CSA not applicable
C68
w w w.t nb.c a
Floor Boxes
Furniture Feed
FFPT3 Series Poke-Through
When feeding large bundles of communications cables through a firerated floor, the FFPT3 Series provides a high-capacity, straight-through
wiring solution. It can also be used for power wiring.
•Capacity: Concentric 1-1/4 in. and 2, in. hub for power or
communications wiring (plugs included)
•Core Drill Size 3 in.
•Solid brass and aluminum covers provide superior aesthetics and
durability
•Powder-coated aluminum covers are available in black, grey, brown
and beige to match any décor – the most colours in the industry
•Junction box not included
Hub Layout – Cover
7 in.
1-1/4 in. and 2 in.
Concentric
Threaded Hub
7-3/4 in.
Cable Entry
2 in. Conduit
Cat. No.
Description
FFPT3-BRS
FFPT3-ALM
FFPT3-BLK
With Black Powder-Coat Cover
FFPT3
FFPT3 Series Poke-Through Base Unit Only
(Cover purchased separately)
Std.
Ctn.
With Brushed-Brass Cover
With Brushed-Aluminum Cover
1
FFPT3 Series – Poke-Through Covers
Cat. No.
FFPT3-CVR-BRS
FFPT3-CVR-ALM
FFPT3-CVR-BLK
FFPT3-CVR-GRY
FFPT3-CVR-BGE
FFPT3-CVR-BRN
Description
Std.
Ctn.
Solid Brass, Brushed Finish
Solid Aluminum, Brushed Finish
Aluminum with Black Powder-Coat Finish
Aluminum with Grey Powder-Coat Finish
4
Aluminum with Beige Powder-Coat Finish
Aluminum with Brown Powder-Coat Finish
FFPT3 Series – Replacement Plug Kits
•Replacement plug kit includes 1-1/4 in. concentric and 2 in. plug
Cat. No.
FFPT3-RPK-BRS
FFPT3-RPK-ALM
FFPT3-RPK-BLK
FFPT3-RPK-GRY
FFPT3-RPK-BGE
FFPT3-RPK-BRN
Description
Std.
Ctn.
Solid Brass, Brushed Finish
Solid Aluminum, Brushed Finish
Aluminum with Black Powder-Coat Finish
Aluminum with Grey Powder-Coat Finish
4
Aluminum with Beige Powder-Coat Finish
Aluminum with Brown Powder-Coat Finish
CSA not applicable
w w w. t nb. c a
C69
Floor Boxes
Furniture Feed
FPT Furniture Feed Series
With three conduit hubs for power and communications and an integral junction box,
the FPT Series provides a flexible, cost effective furniture feed solution.
•Capacity: (2) 1/2 in. hubs and (1) 3/4 in. hub for power and data (plugs included)
•Core Drill Size 3 in.
•Nonmetallic covers are available in black, grey, beige and brown
•Provided with Steel City® die cast fittings for flexible metal conduit: (2) 1/2 in.
and (1) 3/4 in.
•Integral junction box features (5) 1/2 in. and (5) 3/4 in. knockouts
(27 cubic inch capacity)
Cable Entry
16 in.
Opening for power
(equivalent to two
3/4 in. conduit)
Opening for power
(equivalent to one
1/2 in. conduit)
Description
Cat. No.
FPT448-SW-BLK
FPT448-SW-GRY
FPT448-SW-BGE
FPT448-SW-BRN
FPT-400B
Std. Ctn.
With Black Nonmetallic Cover
With Grey Nonmetallic Cover
1
With Beige Nonmetallic Cover
With Brown Nonmetallic Cover
FPT Poke-Through Base Unit Only (Cover purchased separately)
Furniture Feed Poke-Through Covers
Hub Layout – Cover
3/4 in. Threaded Hub
1/2 in. Threaded Hub
7 in. Diameter
Description
Cat. No.
FPT-442-SW-BLK
FPT-442-SW-GRY
FPT-442-SW-BGE
FPT-442-SW-BRN
C70
Std. Ctn.
Black, Nonmetallic
Grey, Nonmetallic
Beige, Nonmetallic
1
Brown, Nonmetallic
w w w.t nb.c a
Floor Boxes
Above-Floor Pedestals
FPT Pedestal Series
By mounting all outlets above-floor level and at a 90º angle to the floor,
the FPT Pedestal Series protects power receptacles and communications
devices from dirt and debris. An overhanging housing provides additional
protection for the outlets.
•Pedestals available in 2 compartment and 4 compartment for power
and communications applications
•Core Drill Size 3 in.
•Housings and device plates feature a brushed-aluminum finish
•Integral junction box features (5) 1/2 in. and (5) 3/4 in. knockouts
(27 cubic inch capacity)
16 in.
FPT-401A
Cable Entry
Opening for
communication
(equivalent to two
3/4 in. conduit)
Opening for power
(equivalent to one
1/2 in. conduit)
Description
Cat. No.
FPT Pedestal, Accepts 2 Device Plates, Poke-Through
Std.
Ctn.
FPT-401A Base Unit Purchased Separately (2-5/8 in. H x 4 in. W x 4-7/8 in. D)
10
FPT Pedestal, Accepts 4 Device Plates, Poke-Through
Base Unit Purchased Separately (2-5/8 in. H x 4 in. W x 4-7/8 in. D)
5
FPT-421
FPT-400B FPT Poke-Through Base Unit Only
FPT-421
1
FPT Pedestal Series – Device Plates & Accessories
Cat. No.
OPOD4-WH
Description
Std.
Ctn.
FPT-424
FPT-425
Duplex Device Plate, Aluminum with Anodized Finish
50
Blank Device Plate, Aluminum with Anodized Finish
50
OPOD4-WH*
4-Port “106” Duplex Adapter for Keystone Jacks
(for use with FPT-424 plate)
100
FPT-408A
FPT-422A
FPT-416
Voltage Divider for FPT-401A Pedestal
10
Voltage Divider for FPT-421 Pedestal
10
Adapter for Conduit Stub Ups
50
*CSA not applicable
w w w. t nb. c a
C71
Floor Boxes
Flush Power and Communications
Technical Specifications
Fire Rating and Concrete Thickness
Min./Max. (all series)
Maximum Allowable Copper CrossSectional Area for Communications
Cabling — Furniture Feed Poke-Through
Systems
•For use in 1-, 1-1/2 and 2-hour rated floors
•1-hour rated floor:
– 2-1/4 in. minimum concrete over steel decking
– 3 in. minimum concrete for reinforced slab
– 7-1/2 in. maximum concrete thickness
•2-hour rated floor:
– 3-1/4 in. minimum concrete over steel decking
– 4 in. minimum concrete for reinforced slab
– 7-1/2 in. maximum concrete thickness
FPT4 Series
•FFPT4 Series:
– 3/4 in. Hub for Power
– 1-1/4 in. Hub for Communications
•FFPT3 Series:
– 2 in. Hub for Power or Communications
Materials
FPT3 Series
Compartment B
(Left)
Compartment B
(Left)
Compartment A
(Center)
Compartment B
(Right)
Compartment B
(Right)
Compartment A
(Center)
Maximum Allowable Copper Cross-Sectional
Area for Communications Cabling
Poke-Through
Series
Compartment B Compartment A Compartment B
(Left)
(Center)
(Right)
FPT4-4P-4C
FPT4-2P-6C
FPT4-8C
FPT4-1TL-2C
FPT3-2P-2C
Power
0.01630 sq. in.
Power
Power
0.01630 sq. in.
0.01536 sq. in.
0.01536 sq. in.
0.01630 sq. in.
0.01536 sq. in.
Power
Power
0.01536 sq. in.
0.00321 sq. in.
Power
0.00321 sq. in.
Cross-Selectional Area for Common Copper Conductors
24 AWG
0.00032 sq. in.
22 AWG
0.00050 sq. in.
14 AWG
0.00323 sq. in.
12 AWG
0.00512 sq. in.
10 AWG
0.00615 sq. in.
8 AWG
0.01296 sq. in.
Solid or stranded wires
RPT Series
The RPT Series has been superseded by the FPT4 Series
RPT Series
FPT4 Series
RPT-4P-2RJ
FPT4-4P-4C
RPT-2P-4RJ
FPT4-2P-6C
RPT-6RJ
FPT4-8C
C72
•FPT4 Series:
– Covers: Solid brass or aluminum
– Conduit Hubs: Cast Iron
– Base: Die-cast zinc, galvanized steel & intumescent fire-stop material
– Junction box: Galvanized steel
•FPT3 Series:
– Covers: Solid brass or aluminum
– Base: Die-cast zinc, galvanized steel & intumescent fire-stop material
– Junction box: Galvanized steel
•FPT Flush/Furniture Feed/Pedestal Series:
– Covers: Solid brass or aluminum, nonmetallic – polycarbonate
– Base: Phenolic, galvanized steel & intumescent fire-stop
material
– Junction box: Galvanized steel
•FFPT4 Series:
– Covers: Solid brass or aluminum
– Base: Die-cast zinc, galvanized steel & intumescent fire-stop material
– Junction box: Galvanized steel
•FFPT3 Series:
– Covers: Solid brass or aluminum
– Base: Die-cast zinc, galvanized steel & intumescent fire-stop material
Installation Spacing
•Minimum of 2-ft on center
•Not more than one Poke-Through per 65 sq. ft. of floor area in each span
w w w.t nb.c a
Floor Boxes
Access Floor Modules
Steel City®
Access Floor
Modules from
Thomas & Betts
eliminate the clutter
of power, voice and data
lines by keeping everything
out of sight but conveniently
close at hand. Our easy-toinstall Access Floor Modules are designed to blend with any décor, while
providing the durability and versatility you need to meet the growing
demands of today’s high-tech offices. You can use our Access Floor
Modules with virtually any type of raised floor. Our system is designed
to provide a simple, strong and adaptable solution to even the most
demanding wire-management needs.
Range of Box Sizes Designed to Meet the Needs of any
Application. Now and Later.
Wide Variety of Interchangeable Power and Data Panels
Adapt to Changing Demands.
Our extensive line of panels and connection devices maximize the
versatility of our Access Floor Modules. All our panels are designed
to be easy to connect, disconnect and rearrange to reduce on-site
installation time. And Thomas & Betts is continually developing new
configurations to meet the requirements of virtually any installation,
especially for the fast-growing needs of voice and data communication.
Durable, Solid Steel Covers Support Heavy Loads to
Protect Important Connections.
With six sizes to choose from, our Access Floor Modules handle a
broad range of wiring needs, from single power lines to complex data
and voice systems. In fact, our largest unit offers 325 cu. in. of space,
making it the roomiest in the industry. And, because our modules
are easy to install and relocate, you can easily change box sizes or
reposition modules as office configurations change.
We’ve reinforced the resilient nylon covers of our modules with a
5/32 in. steel plate to prevent buckling under heavy furniture and
equipment. The beveled sides enable quick and unobstructed
installation in the raised floor.
In addition, our retractable exit not only helps prevent tripping, but
protects cable connections by sealing out dust and debris. And, as with
all Thomas & Betts products, our Access Floor Modules are constructed
to meet our high standards for durability, safety and reliability.
New, Low-Profile Box Fits Right In with Shallower Raised
Floors.
Steel City® Access Floor Modules Provide Outstanding
Performance Without Standing Out.
For installations where shallower raised floors are needed,
Thomas & Betts has developed a low-profile Access Floor Module
to provide the same accessibility and convenience where space is a
premium. Just 2-1/2 inches deep, it can still accommodate a variety of
power, voice and data connections.
The hinged service top on our modules sits flush with the floor and
provides complete access to the connections within. The nylon frame
comes in grey, brown, beige and black.
Our Access Floor Modules keep wire connections close-at-hand but not
under foot. The widest variety of box sizes, panels and devices in the industry
provides exceptional versatility for changing office needs. Look below the
surface and see how Steel City® Access Floor Modules can manage all your
power, voice and data connections – today and tomorrow.
w w w. t nb. c a
C73
Floor Boxes
Access Floor Modules
AFM-2 Series Access Floor Module – Nonmetallic Covers
Specifications
Access Floor Module Size
AFM-2-GRY
AFM Depth
4 in.
Access Floor Cut-Out
7-1/8 in. x 4-1/8 in.
AFM Cover Size
6-3/4 in. x 3-7/8 in.
AFM Cover Access Area
17 sq. in.
Box Volume (Less Panels)
Device
Compartment45º
Volume
Power Panel Included
75 cu. in.
AFP-2A
Cover/Carpet Flange Material
Nylon-6
16.2 cu. in.
Body Material
14 gauge galvanized steel
Max. No. of Device Panels
2
Devices not included
Nylon carpet flange available in Black, Grey, Brown or Beige
POWER PANELS
AFM-2-BLK
GRY
BRN
BGE
AFM-2
DATA PANELS
ACCESSORIES
AFT-2
Power tunnel
AFP-2A*
AFP-2B
AFD-2J
AFD-2 3RJ
AFR-2**
Single duplex
Blank
1 IBM set
Ketystone style jacks
Mounting flange
*(1) supplied with box
** Used to correct opening in floor. Not required for all installations
Polycarbonate Carpet Flange and Covers w/5/32 in. Steel Plate
Retractable Exit with Dust Seal
8-1/4 in.
AFP-2 Series Device panel
4 in.
5-1/8 in.
14-Gauge Galvanized Steel Box
7-1/8 in.
C74
AFM-2
Shown with supplied power panel and optional panel
(sold separately)
w w w.t nb.c a
Floor Boxes
Access Floor Modules
AFM-2 Series Access Floor Module – Metallic Covers
AFM-2-ALM
AFM-2-BRS
4 in.
Specifications
Access Floor Module Size
AFM-2
AFM Depth
4 in.
Access Floor Cut-Out
7-1/8 in. x 4-1/8 in.
AFM Cover Size
6-3/4 in. x 3-7/8 in.
AFM Cover Access Area
17 sq. in.
Box Volume (Less Panels)
Device
Compartment 45º
Volume
Power Panel Included*
75 cu. in.
Cover/Carpet Flange Material
Brass, Aluminum
Body Material
14 gauge galvanized steel
Max. No. of Device Panels
2
7-1/8 in.
16.2 cu. in.
AFP-2A
Prewiring available: Special panels available – consult your Regional Sales Office
Replacement covers: See 664 Series covers on pages C49-C50
4-1/8 in.
AFM-2 Series Raised Floor Boxes
Cat. No.
AFM-2-BRS
AFM-2-ALM
w w w. t nb. c a
Description
AFM-2 Raised Floor Box, 2 Compartments, Solid Brass Cover
AFM-2 Raised Floor Box, 2 Compartments, Solid Aluminum Cover
Std. Ctn.
1
C75
Floor Boxes
Access Floor Modules
AFM-4 Series Access Floor Module – Nonmetallic Covers
Specifications
AFM-4
Access Floor Module Size
AFM-4-BRN
AFM Depth
4 in.
Access Floor Cut-Out
7-15/16 in. x 7-15/16 in.
AFM Cover Size
7-5/8 in. x 7-5/8 in.
AFM Cover Access Area
39 sq. in.
Box Volume (Less Panels)
150 cu. in.
45º Power
Device
60º Power
Compartment Center Data
VolumePower
Data
27.3 cu. in.
25.2 cu. in.
20.6 cu. in.
–
–
Base Opening
2 in. x 2-7/8 in.
Power Panel Included
AFP-4A
Cover/Carpet Flange Material
Nylon-6
Body Material
14 gauge galvanized steel
Max. No. of Device Panels
3
Devices not included
Nylon carpet flange available in Black, Grey, Brown or Beige
POWER PANELS
AFM-4-BLK
GRY
BRN
BGE
AFP-4A*
Single
duplex-45º
AFP-4A60
Single
duplex-60º
DATA PANELS
AFP-4-GFCI
Single
GFCI-60º
AFD-4A
Single duplex data
AFD-4B
Blank
ACCESSORIES
AFT-46
Power tunnel
AFR-4**
Mounting flange
AFP-4B
Blank-45º
AFP-4B60
AFD-4-4RJ
Blank-60º
Keystone style jacks
AFC-N
Grommeted
closure panel
AFM-4EX
Extension collar
*(1) supplied with box
** Used to correct opening in floor. Not required for all installations
Shown with
supplied power
panel and optional
data panel and 45º
power panel (sold
separately)
Receptacle Exit with Dust Seal
Nylon Carpet Flange and Cover with 5/32 in. Steel Plate
4 in.
45º AFP-4/6
Series Device
Panel
AFD-4/6 Series Device Panel
60º AFD-4/6
Series
Device Panel
Shown with
optional 60º
power panels
(sold separately)
45º Angle Plates
60º Angle Plates
1,5 in.
1,47 in.
14 Gauge Galvanized Steel Box
7-15/16 in.
C76
w w w.t nb.c a
Floor Boxes
Access Floor Modules
AFM-4 Series Access Floor Module – Metallic Covers
AFM-4-ALM
AFM-4-BRS
Specifications
Access Floor Module Size
AFM-4
AFM Depth
4 in.
Access Floor Cut-Out
7-15/16 in. x 7-15/16 in.
AFM Cover Size
7-5/8 in. x 7-5/8 in.
AFM Cover Access Area
39 sq. in.
Box Volume (Less Panels)
150 cu. in.
45º Power
Device
60º Power
Compartment Center Data
VolumePower
Data
27.3 cu. in.
25.2 cu. in.
20.6 cu. in.
–
–
Base Opening
2 in. x 2-7/8 in.
Power Panel Included
AFP-4A
Cover/Carpet Flange Material
Brass, Aluminum
Body Material
14 gauge galvanized steel
Max. No. of Device Panels
3
4-1/4 in.
7-15/16 in.
7-15/16 in.
Devices not included
AFM-4 Series Raised Floor Boxes
Cat. No.
AFM-4-BRS
AFM-4-BRS-R*
AFM-4-ALM
AFM-4-ALM-R*
Description
Std. Ctn.
AFM-4 Raised Floor Box, 4 Compartments, Solid Brass Cover
AFM-4 Raised Floor Box, 4 Compartments, Solid Brass Cover with Recess
AFM-4 Raised Floor Box, 4 Compartments, Solid Aluminum Cover
1
AFM-4 Raised Floor Box, 4 Compartments, Solid Aluminum Cover with Recess
*Not CSA Certified
w w w. t nb. c a
C77
Floor Boxes
Access Floor Modules
AFM-6 Series Access Floor Module
Specifications
AFM-6-BRN
Access Floor Module Size
AFM-6
AFM Depth
4 in.
Access Floor Cut-Out
7-15/16 in. x 10 in.
AFM Cover Size
7-5/8 in. x 9-3/4 in.
AFM Cover Access Area
60 sq. in.
Box Volume (Less Panels)
225 cu. in.
Device
45º Power
Compartment 60º Power
Volume
Center Data
41.5 cu. in.
38.3 cu. in.
31.3 cu. in.
Base Opening
2 in. x 2-7/8 in.
Power Panel Included
AFP-6Q
Cover/Carpet Flange Material
Nylon-6
Body Material
14 gauge galvanized steel
Max. No. of Device Panels
3
Devices not included. Nylon carpet flange available in Black, Grey, Brown or Beige
C78
w w w.t nb.c a
Floor Boxes
Access Floor Modules
AFM-6 Series Access Floor Module
POWER PANELS
AFP-6Q•
AFM-6-BLK
GRY
BRN
BGE
Double duplex-45º
DATA PANELS
AFP-6B
AFD-6Q
Blank-45º
Double duplex data
ACCESSORIES
AFD-6M
2 Telephone - 4 coax
AFT-46
Power tunnel
AFP-6A
Single duplex-45º
AFP-6B60
AFD-6L*
Blank-45º
2 IBM sets
AFD-6B*
Blank
AFR-4**
Mounting flange
AFP-6R60
Double duplex-60º
AFP-6A60*
Single duplex-60º
AFP-6-GFCI
Double GFCI-60º
AFD-6K
2 Telephone
AFP-6-GFCI-45*
AFD-6 6RJ
Keystone style jacks 6
AFD-6A*
Double GFCI-45º
Single duplex
AFC-N
Grommeted
closure panel
AFM-6EX*
Extension
collar
* Not CSA Certified ** Used to correct opening in floor. Not required for all installations
• (1) Supplied with box
Receptacle Exit with Dust Seal
Nylon Carpet Flange and Cover with 5/32 in. Steel Plate
4 in.
45º AFP-4/6
Series Device
Panel
AFD-4/6 Series Device Panel
60º AFD-4/6
Series
Device Panel
1,5 in.
1,47 in.
14 Gauge Galvanized Steel Box
7-15/16 in.
w w w. t nb. c a
45º Angle Plates
60º Angle Plates
Shown with Supplied Power
Panel and Optional
Data Panel and 45º Power
Panel (sold separately)
Shown with optional
60º Panels
(sold separately)
C79
Floor Boxes
Access Floor Modules
AFM-6S-2 Series Access Floor Module
Specifications
Access Floor Module Size
AFM-6S-2
AFM Depth
2-1/2 in.
Access Floor Cut-Out
7-15/16 in. x 10 in.
AFM Cover Size
7-5/8 in. x 9-3/4 in.
AFM Cover Access Area
60 sq. in.
Box Volume (Less Panels)
172 cu. in.
Device compartment volume
AFM-6S-2-BLK
Power
13.1 cu. in.
Data
6.6 cu. in.
Base opening
—
Power panels included**
AFP-6S2-L, AFP-6S2-R
Wire tunnel included
—
Cover/carpet flange material
Polycarbonate
Body material
14-gauge galvanized steel
Prewiring available
Yes*
Max. no. of device panels
4
*Special panels available — Contact your Regional Sales Office
**Devices not included
Available with black (-BLK), brown (-BRN), beige (-BGE) or grey (-GRY) cover flange
Replacement cover: AFM-6-CST-SW black (-BLK), brown (-BRN), beige (-BGE)
or grey (-GRY) cover flange
POWER PANELS
AFM-6S2BLK
GRY
BRN
BGE
DATA PANELS
ACCESSORIES
AFP-6S2-R (L)
Single duplex
(R-right side; L-left side)
AFD-6S2-2RJ*
AFP-6S2-GR (-GL)
AFD-6S2-B*
Keystone style
jacks
Single GFCI
AFR-6
Mounting
flange
Blank
Used to connect opening in floor.
Not required for all installations
AFP-6S2-BR (-BL)*
Blank
* Not CSA Certified
11’
Retractable Nylon
Exit
With Dust Seal
Nylon Carpet Flange and Cover with 5/32 in.
Steel Plate
2-1/2 in.
9 in.
AFP-6S/AFD-6S Series Device Panels
1.75 in.
14-Gauge Galvanized Steel Box
10 in.
AFM-6S2
Shown with supplied power panels and optional panels
(sold separately)
C80
w w w.t nb.c a
Floor Boxes
Access Floor Modules
AFM-6V Series Access Floor Module
Specifications
AFM-6V-BRN
Access Floor Module Size
AFM-6V
AFM Depth
4.70 in.
Access Floor Cut-Out
7-15/16 in. x 10 in.
AFM Cover Size
7-5/8 in. x 9-3/4 in.
AFM Cover Access Area
60 sq. in.
Box Volume (Less Panels)
201 cu. in.
45º Power
Device
60º Power
Compartment Center Data
VolumePower
Data
–
–
–
51 cu. in.
51 cu. in.
Base Opening
1.72 in. x 5.28 in.
Data Panel Included
AFD-6V-2F
Power Panel Included
AFP-6V-3D
Closure Panel Included
Yes
Cover/Carpet Flange Material
Nylon-6
Body Material
14 gauge galvanized steel
Max. No. of Device Panels
2
Devices not included. Nylon carpet flange available in Black, Grey, Brown or Beige
POWER PANELS
AFM-6V-BLK
GRY
BRN
BGE
DATA PANELS
ACCESSORIES
AFR-6*
AFP-6V-R 3D•*
Three duplex
AFD-6V-2F•*
Two single gang
data face plates
AFP-6V-3G*
Mounting
flange
AFD-6V-B*
Blank
Used to correct opening in floor.
Not required for all installations.
Three GFCI
*Not CSA Certified
• (1) AFP-6V-3D and (1) AFD-6V-2F supplied with box
10.75 in.
8.50 in.
4.70 in.
10 in.
w w w. t nb. c a
AFM-6V
Shown with supplied power panels and optional panels
(sold separately)
C81
Floor Boxes
Access Floor Modules
AFM-8 Series Access Floor Module
Specifications
AFM-8-BLK
Access Floor Module Size
AFM-8
AFM Depth
5-5/8 in.
Access Floor Cut-Out
9-5/8 in. x 9-5/8 in.
AFM Cover Size
9-3/8 in. x 9-3/8 in.
AFM Cover Access Area
74 sq. in.
Box Volume (Less Panels)
325 cu. in.
45º Power
Device
60º Power
Compartment Center Data
VolumePower
Data
–
–
–
15.75 cu. in.
15.75 cu. in.
Base Opening
–
Cover/Carpet Flange Material
Nylon-6
Body Material
14 gauge galvanized steel
Max. No. of Device Panels
10
Devices not included
Nylon carpet flange available in Black, Grey, Brown or Beige
POWER PANELS
DATA PANELS
ACCESSORIES
AFR-8
AFM-8-BLK
GRY
BRN AFP-8A*
BGE Single duplex
AFP-8G*
Single GFCI
AFP-8B
Blank
Mounting
flange
AFD-8 3RJ
Keystone
Used to correct opening in floor.
Not required for all installations
*Not CSA Certified
9-5/8 in.
Retractable Nylon Exit
With Dust Seal
Nylon Carpet Flange and Cover with 5/32 in. Steel Plate
AFP/AFD-8 Series Device Panels
5-5/8 in.
9-5/8 in.
+2 in.
14-Gauge Galvanized Steel Box
9-5/8 in.
AFM-8
Shown with optional panels (sold separately)
C82
w w w.t nb.c a
Floor Boxes
Access Floor Modules
Concrete Inserts
C
B
A
GAB-8-S
9.8 in.
9.8 in.
5.9 in.
14.8 in.
GAB-8-S with AFM-8
Cat. No.
GAB-8-S
16.4 in.
A
B
C
Maximum
Capacity
(cu. in.)
5-7/8
9-3/4
16-3/8
325
Dimensions (in.)
Standard
Conduit
Tapping
Maximum
Conduit
Tapping
AFM
Insert
Std.
Ctn.
2-3/4 in.
2–1-1/4 in.
–
AFM-8
1
Base presets required to installation in concrete pours only. For use with the AFM insert.
The GAB cast Pre-Set includes center collar and styrene insert to prevent concrete ingress. Standard conduit hubs are 3/4 in. and 1-1/4 in.
w w w. t nb. c a
C83
Floor Boxes
Above-Floor Service Fittings
Service Fittings
Steel City® Service Fittings Provide Above-Floor Service for Power, Communications and Data
SFH-40 Series
Duplex
Receptacle
SFH-40-RG
SFH-50-2RG
Nipple
Floor Box
SFH-40 Series
•Brushed-aluminum finish
•Low-profile design
•Furnished with 1 in. conduit nipple
P-90-1 Cover Plate
SFH-50-Base
SFH-50 Series
•Brushed-aluminum finish
•Interchangeable face plates
•Furnished with 1 in. conduit nipple for direct screw-threading
into a floor box plate with 1 in. cover opening
Cat. No.
SFH-40-RG
SFH-40
SFH-50-2RG
SFH-50
SFH-51
Description
Furnished with One 15A
125 Volt, 3-Wire NEMA Duplex
Receptacle
Same as SFH-40-RG Above,
Less Duplex Receptacle
Dimensions (in.)
W
D
H
4-3/8
3
2-5/8
Furnished with Two Back-to
Back 15A, 125 Volt, 3-Wire
NEMA Duplex Receptacles
Same as SFH-50-2RG, Less
Duplex Receptacle
Furnished with Cover Plate
to Accommodate One 30 or
50A, 240 Volt, 3-Wire
Receptacle and Blank Cover
SFH-51-Cover
Single Receptacle Plate, 2.16 in. Hole
SFH-50-DUPCOV
Duplex Receptacle Plate
SFH-50-BLCOV
Blank Plate
SFH-50-TELECOV
Telephone Plate, 1 in. Hole
Std.
Ctn.
4
5
3-3/8
3
SFH-50-CVW11332
Single Receptacle Plate, 2.16 in. Hole
SFH-50-CVW11932
Single Receptacle Plate, 1.60 in. Hole
Service Fittings for Communications and Data
•Brushed-aluminum finish
•Interchangeable face plates
•Furnished with 1 in. conduit nipple for direct screw-threading
into a floor box plate with 1 in. cover opening
Cat. No.
SFL-10
C84
Description
3/4 in. x 1-1/8 in. Brushed Opening
for Telephone or Computer
Dimensions (in.)
W
D
H
Std.
Ctn.
4-3/8
3-1/8
2-5/8
4
SFL-10 Series
P-90-1
Cover Plate
Nipple
Communications
Connector
68 Series
Floor Box
SFL-10
w w w.t nb.c a
Floor Boxes
Recessed Service Floor Fittings
Communications Accessories
Decora/Duplex Adapters for Use with
Standard Floor Box Device Plates
Keystone Inserts for Data, Voice and
Audio Visual Applications
OPJDU5EL-WH
OPODEC1-WH
OPODEC2-WH
OPODEC3-WH
OPODEC4-WH
OPA35-WH*
OPODEC6-WH
OPOD4-WH
Cat. No.
OPODEC1-WH
OPODEC2-WH
OPODEC3-WH
OPODEC4-WH
OPODEC6-WH
OPOD4-WH
OPODEC-XLRF-WH
OPODEC-VGA-WH
OPAFR*
OPARCAW*
OPARCAR*
OPAHDMI-WH
OPAS-WH*
OPARCAY*
OPAB-WH
OPODEC-XLRM-WH
Description
Std.
Ctn.
GFCI Device Plate, 1-Port, Keystone, White
GFCI Device Plate, 2-Port, Keystone, White
GFCI Device Plate, 3-Port, Keystone, White
5
GFCI Device Plate, 4-Port, Keystone, White
GFCI Device Plate, 6-Port, Keystone, White
4-Port, Keystone, White
OPODEC1-XLRF-WH
Female XLR Microphone Jack,
Solder Leads, White
OPODEC-XLRM-WH
Male XLR Microphone Jack,
Solder Leads, White
OPODEC-VGA-WH
VGA Connector,
Female-to-Female, White
CSA not applicable
OPJV6CL-WH
OPJU6L-WH
10
Cat. No.
Description
OPJDU5EL-WH
OPJDU6L-WH
OPJV6CL-WH
Cat-6e Data Jack, White
OPA35-WH
3.5 mm Stereo Connector, Recessed,
Female-to-Female, White
OPARCAW
RCA Connector – White, Recessed,
Female-to-Female
OPARCAR
RCA Connector – Red, Recessed,
Female-to-Female
OPARCAY
RCA Connector – Yellow, Recessed,
Female-to-Female
OPAFR
F-Connector – Recessed,1 GHz,
Female-to-Female, Red
OPAS-WH
S-Video Connector, 4-Pin, recessed,
Female-to-Female, White
OPAHDMI-WH
HDMI Connector, Recessed,
Female-to-Female, White
OPAB-WH
Blank Insert, White
5
Std.
Ctn.
Cat-5e Data Jack, White
Phone Jack, 6-Conductor, White
5
100
*SPECIAL INSTALLATION NOTE: When using these AV connectors with OPODEC4-WH & OPODEC6-WH Decora Adapters, only a Blank Insert (OPAB-WH) can be used in the same horizontal row. Trim the ears
off the Blank Insert and install prior to installing the AV connector in the row.
w w w. t nb. c a
C85
Floor Boxes
Keystone / Data Accessories
Keystone Category 5e Jacks
•Universal «Keystone» mounting
configuration
•Labeled for both 568A and 568B wiring
•Versatile IDC design accommodates 110
or Krone punchdown tools
•Accepts universal «Keystone» jacks and adapters for maximum flexibility
•Accepts category 6e Jacks
17
Cat. No.
Description
Colour
OPJNUD
Cat 5e Slim-Line UTP Jack, 568A/568B Wiring,
Dual 110/Krone IDC
Black
OPJNUD-IV
Cat 5e Slim-Line UTP Jack, 568A/568B Wiring,
Dual 110/Krone IDC
Ivory
OPJNUDBL
Cat 5e Slim-Line UTP Jack, 568A/568B Wiring,
Dual 110/Krone IDC
Blue
OPJNUDOW
Cat 5e Slim-Line UTP Jack, 568A/568B Wiring,
Dual 110/Krone IDC
Off
White
OPJNUDWH
Cat 5e Slim-Line UTP Jack, 568A/568B Wiring,
Dual 110/Krone IDC
White
.0
16.00
0
.10
14
.80
31
Keystone RJ11 Voice Jacks
Cat. No.
C86
Description
Colour
OPJ6CVBK
6 Wire RJ11/RJ12 Voice Jack
Black
OPJ6CVIV
6 Wire RJ11/RJ12 Voice Jack
Ivory
OPJ6CVOW
6 Wire RJ11/RJ12 Voice Jack
Off White
OPJ6CVWH
6 Wire RJ11/RJ12 Voice Jack
White
w w w.t nb.c a
Floor Boxes
Replacement Parts and Accessories
68, 600, 640, 740 and 840 Series – 1-, 2-, 3-Gang
Floor Plate Plug Inserts
Tile Trims
690-SC
691-SC
692-SC
693-SC
694
695
696-SC
697*
698*
Std.
Ctn.
Description
Cat. No.
600-4-FL-AL
600-4-FL
Std.
Ctn.
Finish
Cat. No.
Aluminum
1
Brass
1/2 in. – 14 in. N.P.S. Thread
3/4 in. – 14 in. N.P.S. Thread
1 in. – 11-1/2 in. N.P.S. Thread
1-1/4 in. – 11-1/2 in. N.P.S. Thread
4
2 in. – 20 in. UN Thread
1/2 in. – 2 in.
3/4 in. – 2 in.
Gaskets for Floor Plates Assemblies
2-5/8 in. – 20 UN 2A Thread
1-7/16 in. for Duplex P-60-DU
*CSA not applicable
Catalogue numbers are for brass.
For aluminum, add AL after catalogue number.
Gaskets for Floor Plate Assemblies
Cat. No.
SP650*
SP651*
SP-P64-DS-P2
Cat. No.
Description
Std.
Ctn.
630-SC
P-60 Series Floor Plate Assemblies
631
(except duplex) P-60-DR, P-60-DU,
P-60-DS-AL Floor Plate Assemblies
4
SP-P60-DS-P3
P-60-DS Floor Plate Assemblies
1
SP-620-MA
SP-621
w w w. t nb. c a
Description
P-60-2, P-60-1/2-2, P-60-3/4-2
Floor Plate Assemblies
P-60-DR, P-60-DU, P-60-DC-AL and P-60-DS
Floor Plate Assemblies
P-64 Series Floor Plate Assemblies
4
P-64-DU Floor Plate Assemblies
10
P-64-DS Floor Plate Assemblies
4
*CSA not applicable
Seating Plates for Receptacles — Steel
Seating Plates for Receptacles — Steel
Cat. No.
Std.
Ctn.
Description
Std.
Ctn.
1
Cat. No.
640*
639*
638*
Description
Std.
Ctn.
P-64-2, P-64-1/2-2, P-64-3/4-2
Floor Plate Assemblies
P-64-2-5/8 Floor Assemblies
10
P-64-DS and P-64-DU Floor Plate Assemblies
1
4
*CSA not applicable
C87
Floor Boxes
Replacement Parts and Accessories
For 70, 88 and 98, 671 or 672 Series
Metal Cap: 8818
Plug Insert: 694
Floor Box: P-90-2
Gasket: 8811
Receptacle and Plate:
478G-12
Adjusting Ring: 8805
8805
8803
8818
8805
8803
8818
9803
Galvanized Steel
or Cast Iron Body
Std.
Ctn.
Description
Cat. No.
Threaded
Steel Cover: 8803
9803
Brass Adjusting Ring
Threaded Steel Body Cover for 78 and 88 Series
Metal Protective Cap
4
Threaded Steel Body Cover for 98 Series
CSA not applicable
2-5/8 in. – 20 in. UN 2A Thread
Rough-Level Adjusting
Screws 1/4 –
20 x 2-1/2 in.
Floor Box Assembly
with Floor Plate
Gasket for Floor Plate Assembly
For use with
Cat. No.
8811
P90 Series Floor Plates
Plate for Short Strap Receptacle
Std.
Ctn.
Cat. No.
889
4
Extension Collar
Std.
Ctn.
For use with
Series 78, 88, 98, 671, 672 Boxes
4
Microphone Adapter for Floor Boxes
489-MA
1-1/4 in. dia.
2 – 21/32 in.
11/16 in.
Opening
Description
Cat. No.
8805-E
Provides an Extension of Floor Box Throat Upward 1-1/8 in.,
for Extreme Depths (7 cu. in.) 2-5/8 – 20 UN 2A Thread
Std.
Ctn.
Cat. No.
Description
Std.
Ctn.
4
489-MA
27-gauge Galvanized Steel with 1-1/4 in. dia. Opening
for Standard Microphone Jacks: for Steel City®
Floor Box Series 78, 88, 98 and 671
4
CSA not applicable
C88
w w w.t nb.c a
Floor Boxes
Floor Box Selection Chart
Service Capabilities
Cat. No.
Receptacles
Single Duplex GFCI
SFH-40 SERIES
•
•
SFH-50 SERIES
•
•
SFL-10 SERIES
600
601
602
603
604
•
•
•
•
•
•
642
642P
643
643P
644
Cast
Iron
Stamped
Steel
•
•
•
•
•
•
•
663-SC
664-CI
664-S
664-SC
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2 duplexes, 2 com./data or
1 duplex with com./data
1-gang; 1 service per gang
1-gang; 1 service per gang
2-gang; 1 service per gang
2-gang; 1 service per gang
3-gang; 1 service per gang
3-gang; 1 service per gang
4-gang; 1 service per gang
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2 duplexes,
2 communications/data or
1 duplex with com./data
•
•
•
Up to 4 devices or any
combination of power.
com./data
667-SC
•
•
Up to 8 devices or any
combination of power.
com./data
•
668-S
•
•
Up to 4 devices or any
combination of power.
com./data
•
•
•
•
•
•
71W
841-SC
842-SC
843-SC
88 D
88 S
GAB-8-S
w w w. t nb. c a
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
3-gang; 1 service per gang
•
•
•
•
•
•
•
•
1-gang; 1 service per gang
•
•
•
2-gang; 1 service per gang
•
•
•
•
•
•
•
•
•
•
•
•
•
1 duplex, up to 8 data jacks
•
•
•
•
•
•
13/16 in. adjustment
after installation
•
•
•
•
•
•
•
•
•
•
•
•
•
78-SC
4-1/2 Wood
Fully- Semi- Nonin.
Floor
•
•
•
78 S
4
in.
•
•
665-CI
68-S
3-1/2
in.
•
•
•
68-D
3
in.
•
•
•
•
68-P
2-1/2
in.
Duplex
665
671 SC
2
in.
Adjustability
2 duplexes or low voltage
Up to 4 devices or any
combination of power.
com./data
672
Nonmetallic
•
•
•
•
•
62 W
641
Multiple Service
Capabilities
Minimum Depth of Pour
Com./data only
•
•
•
•
•
61 W
641P
Floor Box Body Material
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
6 in.
•
C89
Floor Boxes
Floor Box Selection Chart
Cat. No.
Description
Cover Plates
663-SC
Concealed Service – Steel
664-SC
Carpet Activations
Title Activation
Brass
Aluminum
Nonmetallic
Brass
Aluminum
Nonmetallic
P60 Series
P60-CP
P60-CPL
P62-CP
P62-TAR
SP-P62-TAR-A
N/A
Concealed Service – Steel
664-CST-Series
N/A
N/A
664-CST-Series
N/A
N/A
N/A
664-S
Shallow Concealed Service – Steel
664-CST-Series
N/A
N/A
664-CST-Series
N/A
N/A
N/A
664-CI
Flush Service – Steel
664-CST-Series
N/A
N/A
664-CST-Series
N/A
N/A
N/A
68-S
Flush Service – Steel
P60 Series
P60-CP
P60-CACP
P60-CPAL
P60-CACPAL
P60-LCP
*
**
–
68-D
Flush Service – Steel
P60 Series
P60-CP
P60-CACP
P60-CPAL
P60-CACPAL
P60-LCP
*
**
–
68-P
Flush Service – Nonmetallic
P60 Series
P60-CP
P60-CACP
P60-CPAL
P60-CACPAL
P68-SRC Colour
P68-DRC Colour
P68-ECC Colour
68-PAR-W/
600-4-FL
68-PAR-W/
600-4-FL-AL
–
600-SC SERIES
Flush Service – Cast Iron
P60 Series
P60-CP
P60-CACP
P60-CPAL
P60-CACPAL
N/A
*
**
–
601-SC SERIES
Flush Service – Cast Iron
P60 Series
P60-CP
P60-CACP
P60-CPAL
P60-CACPAL
N/A
*
**
–
602-SC SERIES
Flush Service – Cast Iron
P60 Series
P60-CP
P60-CACP
P60-CPAL
P60-CACPAL
N/A
*
**
–
603-SC SERIES
Flush Service – Cast Iron
P60 Series
P60-CP
P60-CACP
P60-CPAL
P60-CACPAL
N/A
*
**
–
604-SC SERIES
Flush Service – Cast Iron
P60 Series
P60-CP
P60-CACP
P60-CPAL
P60-CACPAL
N/A
*
**
–
641
Flush Service – Cast Iron
P64 Series
P64-CP
P64-CPAL
P64-CP Series
P-64-LCP
*
**
N/A
Flush Service – Nonmetallic
P64 Series
641P-CACB
641P-CACA
641P-CAC Series
641P-TACB
641P-TACA
641P-TAC Series
*
**
N/A
641P
642
642P
643
643P
644
Flush Service – Cast Iron
P64P Series
P64-2GCP
P64-2GPAL
P64-2GCP Series
P64-2LCP
Flush Service – Nonmetallic
P64 Series
642P-CACB
642P-CACA
642P-CAC Series
642P-TACB
642P-TACA
642P-TAC Series
Flush Service – Cast Iron
P64 Series
P64-3GCP
P64-3GCPAL
P64P-3GCP Series
P64-3LCP
*
**
N/A
Flush Service – Nonmetallic
P64 Series
P64P Series
643P-CACB
643P-CACA
643P-CAC Series
643P-TACB
643P-TACA
643P-TAC Series
Flush Service – Cast Iron
P64 Series
P64-4GCP
P64-4GCPAL
N/A
*
**
N/A
*
**
N/A
841-SC
Shallow Flush Service – Cast Iron
P64 Series
P64-CP
P64-CPAL
P64P-CP Series
P64-LCP
842-SC
Shallow Flush Service – Cast Iron
P64 Series
P64-2GCP
P64-2GCPAL
P64P-2GCP Series
P64-2LCP
*
**
–
843-SC
Shallow Flush Service – Cast Iron
P64 Series
P64-3GCP
P64-3GCPAL
P64P-3GCP Series
P64-3LCP
*
**
N/A
*
*
–
*
*
*
*
*
–
–
**
**
–
**
**
**
**
**
–
–
78-SC
Flush Service – Cast Iron
P90 Series
P90-CP
P90-CPAL
N/A
78 S
Flush Service – Cast Iron
P90 Series
P90-CP
P90-CPAL
N/A
671 SC
Flush Service – Cast Iron
P67 Series
P90-CP
P90-CPAL
N/A
672
Flush Service – Cast Iron
P67 Series
P90-CP
P90-CPAL
N/A
88D
Flush Service – Steel
P90 Series
P90-CP
P90-CPAL
N/A
88DA
Flush Service – Steel
P90 Series
P90-CP
P90-CPAL
N/A
88 S
Flush Service – Steel
P90 Series
P90-CP
P90-CPAL
N/A
Flush Service
P90 Series
P90-CP
P90-CPAL
N/A
98
665-SC
Concealed Service
665-CST Series
N/A
N/A
665-CST Series
667
Concealed Service
665-CST Series
N/A
N/A
665-CST Series
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
–
–
61W
Flush Service – Steel
P64 Series
P64-CP
P64-CPAL
P64-CP Series
N/A
N/A
N/A
62W
Flush Service – Steel
P64 Series
P64-2GCP
P64-2GCPAL
P64-2GCP Series
N/A
N/A
N/A
* Supplied standard with box
** Supplied standard with -AL suffix box
C90
w w w.t nb.c a
Floor Boxes
Floor Box Cover Selection Chart
Cover
Series
Cat. No.
P60
4 in. Dia.
P-60-1/2
P-60-1/2-AL
P-60-3/4
P-60-3/4-AL
P-60-1
P-60-1-AL
P-60-1-1/4
P-60-1-1/4-AL
P-60-2
P-60-2-AL
P-60-2-5/8
P-60-2-5/8-AL
P-60-1/2-2
P-60-1/2-2-AL
P-60-3/4-2
P-60-3/4-2-AL
P-60-DU
P-60-DU-AL
P-60-DS
P-60-DS-AL
P-60-DR
P-60-GFCI
Description
1/2 in. N.P.S. Plug
3/4 in. N.P.S. Plug
1 in. N.P.S. Plug
1-1/4 in. N.P.S. Plug
2 in. Dia. Plug
2-5/8 in. Dia. Plug
1/2 in. N.P.S. & 2 in. Dia. Plugs
3/4 in. N.P.S. & 2 in. Dia. Plugs
Two 1-7/16 in. Dia. Plugs
Two Hinged Lift Lids
P60-CACP P-60-3/4-2-CACP
One-Piece
5-3/4 in. Dia.
P-60-3/4-2-CACP
P-60-3/4-2-CACP-AL
P-67-1/2
P-67-3/4
P-67-3/4-AL
P-67-1
P-67-1-AL
P67
P-67-1-1/4-AL
3-1/2 in. Dia.
P-67-2
P-67-2-AL
P-67-1-1/2-2
P-67-3/4-2
Brushed Brass
Brushed Aluminum
Brushed Brass
Brushed Aluminum
Brushed Brass
Brushed Aluminum
Brushed Brass
Brushed Aluminum
Brushed Brass
Brushed Aluminum
Brushed Brass
Brushed Aluminum
Brushed Brass
Brushed Aluminum
Brushed Brass
Brushed Aluminum
Brushed Brass
Brushed Aluminum
Brushed Brass
Brushed Aluminum
Single Hinged Lift Lid
Brushed Brass
GFCI Hinged Lift Lid
Brushed Brass
P-60-CACP
P-60-CACP-AL
Std. Finish
Brushed Brass
One-Piece Carpet Plate with
Two Hinged Lift Lids for Duplex
Brushed Aluminum
Brushed Brass
One-Piece Carpet Plate with 3-9/32 in.
3/4 in. N.P.S. and 2 in. Dia. Plugs
Brushed Brass
One-Piece Carpet Plate with
3/4 in. and 2 in. N.P.S. Plugs
–
1/2 in. N.P.S. Plug
3/4 in. N.P.S. Plug
1 in. N.P.S. Plug
1-1/4 in. N.P.S. Plug
2 in. Dia. Plug
Brushed Brass
Brushed Brass
Brushed Aluminum
Brushed Brass
Cover
Series
Cat. No.
P-64-1/2
P-64-1/2-AL
P-64-3/4
P-64-3/4-AL
P-64-1
P-64-1-AL
P-64-1-1/4
P-64-1-1/4-AL
P64
P-64-2
3 in. x
P-64-2-AL
4-1/2 in.
Rectangular P-64-1/2-2
P-64-1/2-2-AL
P-64-3/4-2
P-64-3/4-2-AL
P-64-2-5/8
P-64-2-5/8-AL
P-64-DU
P-64-DU-AL
P-64-DS
P-64-GFCI
P64P
P-64P-BP
P-64P-URC
P-90-1/2
P-90-1/2-AL
P-90-3/4
P-90-3/4-AL
P-90-1
P-90-1-AL
P-90-1-1/4
P90
2-3/4 in. Dia. P-90-1-1/4-AL
P-90-2
P-90-2-AL
P-90-1/2-2
P-90-1/2-2-AL
P-90-3/4-2
P-90-3/4-2-AL
Brushed Aluminum
P-68-SRC-BRN
Brushed Brass
Brushed Aluminum
Brushed Brass
3/4 in. N.P.S. & 2 in. Dia. Plugs
Brushed Brass
P68
6 in. Dia.
3/4 in. N.P.S. Plug
1 in. N.P.S. Plug
1-1/4 in. N.P.S. Plug
2 in. Dia. Plug
1/2 in. N.P.S. & 2 in. Dia. Plugs
3/4 in. N.P.S. & 2 in. Dia. Plugs
2-5/8 in. Dia. Plug
Two 1-7/16 in. Dia. Plugs
Two Hinged Lift Lids
GFCI Hinged Lift Lid
Blank Plate
Universal cover
1/2 in. N.P.S. Plug
3/4 in. N.P.S. Plug
1 in. N.P.S. Plug
1-1/4 in. N.P.S. Plug
2 in. Dia. Plug
1/2 in. N.P.S. & 2 in. Dia. Plugs
3/4 in. N.P.S. & 2 in. Dia. Plugs
Std. Finish
Polished Brass
Brushed Aluminum
Polished Brass
Brushed Aluminum
Polished Brass
Brushed Aluminum
Polished Brass
Brushed Aluminum
Polished Brass
Brushed Aluminum
Polished Brass
Brushed Aluminum
Polished Brass
Brushed Aluminum
Polished Brass
Brushed Aluminum
Polished Brass
Brushed Aluminum
Polished Brass
Nonmetallic
Polished Brass
Brushed Aluminum
Polished Brass
Brushed Aluminum
Polished Brass
Brushed Aluminum
Polished Brass
Brushed Aluminum
Polished Brass
Brushed Aluminum
Polished Brass
Brushed Aluminum
Polished Brass
Brushed Aluminum
Nonmetallic Grey
Carpet and Cover Plate
for Single Receptacle
Nonmetallic Brown
P-68-SRC-BGE
Nonmetallic Beige
P-68-FSC-GRY
Nonmetallic Grey
P-68-FSC-BRN
Carpet and Cover Plate
with 1 in. N.P.S. Plug
Nonmetallic Brown
P-68-FSC-BGE
Nonmetallic Beige
P-68-DRC-GRY
Nonmetallic Grey
P-68-DRC-BRN
P-68-DRC-BGE
w w w. t nb. c a
1/2 in. N.P.S. Plug
P-68-SRC-GRY
Brushed Brass
1/2 in. N.P.S. & 2 in. Dia. Plugs
Description
Carpet and Cover Plate
for Duplex Receptacle
Nonmetallic Brown
Nonmetallic Beige
C91
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement