DFI | KS202 | DFI 7" ARM Touch Panel PC

Volume 1
September, 2012
DFI 7" ARM Touch Panel PC
for Marine and Retail applications
KS200
KS201
KS202
www.dfi.com
Introduction
Table of Contents
3
Introduction
4
Features
6
IP65
7
Mounting
9
OS Support
10 Industrial Computing Applications
11 Comparison
12 KS200
16 KS201
20 KS202
The KS200 series is DFI’s new IP65 rated Panel PC. The three 7” Panel PCs are
powered by the TI® AM3517 Sitara ARM Cortex-A8 microprocessor with speed up
to 600 MHz. Based on the ARM architecture, the system is fanless with low power
consumption.
The 3 models use the 4-wire Resistive type 7” LCD touch screen panel that has 400 nits
brightness and can support WVGA resolution of 800x480.
KS200 comes with a 512MB NAND flash onboard and an SD/MMC slot for extending
extra storage. It provides 1 LAN port, 2 COM ports, 2 USB 2.0, and up to 12-bit GPIO
for device controls.
One of the models (KS201) comes with 4 customizable function keys. The function
keys can be programmed to perform actions according to your needs. Touch screen
and function keys improve user interactions which make KS201 ideal for use in
supermarkets and retail outlets.
The open frame Panel PC (KS202) allows easy integration into a customized enclosure.
You can also design the front bezel according to your application requirements. Open
frame design meets vertical markets such as maritime and Kiosk.
The KS200 series supports 14~30V DC power input. Users can benefit from the 2
mounting options: wall mount (VESA 75x75) and panel mount.
With the IP65-certified front panel protection, the panel is protected from ingress of
dust and water. This allows easy cleansing of the panel especially in industries that
place hygiene a top priority. This feature makes the Panel PC ideal for applications such
as the chemical industry, food and beverage industry, marine, and medical applications.
KS200
2
Fanless
TI AM3517 ARM
Cortex-A8
KS201
Compliant with
IEC 60945
(protected B)
KS202
3
Features
Features
KS200 Series
TI® AM3517
ARM Cortex-A8
Touch Panel PCs
Front View
Customizable
Function Keys
Touch screen LCD
Power LED
KS200
KS201
KS201
with 4 Customizable
Function Keys
Open Frame Panel PC for
easy integration into a
customized enclosure
Function Keys (KS201)
7" (800x480) WVGA TFT touch screen LCD
Aluminum front bezel, rugged metal housing
4-Wire Resistive type
4 Customizable function keys (KS201)
Fanless
Features
Top View
Compliant with
IEC 60945
(Protected B)
1 Gigabit LAN Port For Increased Transmission Speed
SD/MMC card slot
512MB DDR2 onboard
12-bit digital I/O ports for device controls
Used to insert an SD (Secure Digital) and MMC (Multi Media Card)
Bottom View
RS232 COM USB
2 COM: 1 RS232/422/485 COM port; 1 RS232 COM port
14-30V DC-in
Enriched I/O
Connectivity
12-bit GPIO
Power Switch
LAN
Line-Out
RS232/422/485 COM
2 Type A USB 2.0
LAN supports 10BASE-T and 100BASE-T
1 SD/MMC card socket
4
12-bit GPIO
5
IP65
OS Support
IP65 Environmental Protection
KS200
Front Panel Protection
KS201
Protects the System Against Ingress of Dust
Waterproof Protection
KS202
6
7
Mounting
Mounting
Wall Mount
Panel Mount
Panel mount kit
- 6 mounting clamps
Wall mount kit
- 2 Wall mount brackets
- Bracket screws
Mounting clamp
Wall mount bracket 1
Wall mount bracket 2
128.60
21
7.6
0
8
9
Comparison
Industrial Computing Applications
Wide Range of Applications
ARM
TI® AM3517
Model
KS200
Display
Touch Screen Panel
KS201
7” WVGA Touch Screen
2
COM: DB-9 D-sub
GPIO: 7-pole
terminal block
POS System
Marine
KS202
2 (12-bit)
LAN: RJ45 with LED
1
USB 2.0 Type A
2
Mic-in
N/A
Line-in
N/A
Bottom I/O
Line-out
1
Power switch
1
Reset button
N/A
DC-in power jack
Control Room
Expansion
POS System
Front Bezel
14~30V
PCIe x1
N/A
Mini PCIe
N/A
PCI
N/A
1
Power LED
2.5” Anti-Vibration
HDD drive bay
N/A
1
SD/MMC
Storage
Memory
Subway
10
Production Control
Onboard CPU
Dimensions
mSATA
(via mini PCIe socket)
N/A
CompactFlash
N/A
512MB DDR2 onboard
TI® AM3517
235mm x 150mm x 40.8mm
230.40mm x 142.32mm x
35.8mm
11
KS200 7" Touch Panel PC
KS200 7" Touch Panel PC
Features
Panel
• TI® AM3517 Sitara ARM Cortex-A8
RS232 COM
USB
14-30V DC-in
• 7" WVGA Touch Screen Fanless Panel PC
• 512MB DDR2 onboard
• 512MB NAND Flash onboard
Line-Out
12-bit GPIO
SD/MMC
• 1 LAN, 2 USB, 2 COM, 1 SD/MMC, 12-bit GPIO
Top View
LAN
Power Switch
RS232/422/485 COM
Bottom View
Fanless
System Specifications
LCD and TOUCH SCREEN
• 7” (800x480) WVGA TFT touch screen LCD
• Supports touch screen
- TI® TSC2004 touch screen controller
• 400 NITS
• 4-Wire Resistive type
STORAGE
• 1 SD/MMC card socket
• 512MB NAND Flash
- Samsung K9F4G08U0D flash memory 512Mx 8bit (512MB)
ETHERNET
• LAN8710 10/100Mbps LAN chip
• 1 LAN port
• Supports 10BASE-T and 100BASE-T
AUDIO
• 1 Line-out
12
Dimensions
214.60
CONSTRUCTION
• Aluminum front bezel, Rugged metal housing
Top View
MOUNTING
•Wall mount (VESA 75x75)
•Panel mount (Mounting clamp)
DIMENSIONS
• 235mm x 150mm x 40.8mm (W x H x D)
WEIGHT
• 2.10 kg
USB
• 1 TUSB1210 USB transceiver
• 2 Type A USB 2.0/1.1 ports
OS SUPPORT
• Windows CE 6.0
• Linux 2.6.x
GPIO
• 12-bit GPIO connector
CERTIFICATION
• CE
• FCC Class B
• Compliant with IEC 60945 (Protected B)
ENVIRONMENT
• Temperature
- Operating: -20oC ~ 65oC
- Storage: -30oC ~ 80oC
• Relative Humidity
- 95% RH at 65oC, 1 week
• Corrosion
- 4 periods of 7 days at 65oC with 90-95% relative humidity after 2
hours salt spray or waiver
Front View
FRONT PANEL PROTECTION
• IP65 (Dust Tight; Water Proof protection)
COM
• 1 RS232/422/485 COM port
• 1 RS232 COM port
POWER
• Power input voltage
- 14~30Vdc (+/-5%) input
Power LED
150.00
MEMORY
• 512MB DDR2 onboard
- 4 DDR2 64Mx16 RAM
I/O PORTS
• Front
- 1 Power LED
• Top
- 1 SD/MMC card socket
• Bottom
- 12-bit GPIO (2 7-pole terminal blocks)
- 1 Line-out
- 1 DB-9 RS232 COM
- 1 RJ45 10/100Mbps LAN with LEDs
- 2 USB 2.0 (Type A)
- 1 DB-9 RS232/422/485 COM
- 1 DC-in (2-pole Phoenix terminal block)
- 1 power switch
Left View
Right View
235.00
Front View
40.80
PROCESSOR SYSTEM
• TI® AM3517 Sitara ARM Cortex-A8
Bottom View
13
KS200 7" Touch Panel PC
KS200 7" Touch Panel PC
Packing List
Mounting
• 1 KS200 Touch Panel PC
Wall Mounting
• 1 Poron foam
• 3 Terminal blocks
•1 19V power adapter
• 1 Quick Installation Guide
• 1 CD disk includes:
- Manual
Ordering Information
Model Name
Part Number
Description
KS200
750-KS2000-000G
7" Panel PC, TI® AM3517 ARM, Aluminum Front Bezel, Resistive Touch,
DC input, R10
Optional Items
Part Number
Description
Wall Mount
785-PPCWMK
Standard Panel PC Wall Mount kit
Panel Mount
785-070PMK
7" Panel PC Panel Mount kit
Power Cord
785-PWRD
Power cord, Standards (USA/EUR/CH), 1.8m, RoHS
Optional Items
Panel Mounting
Suggested cut out size
(The flat panel thickness is less than 10mm)
128.60
21
7.6
0
14
15
KS201 7" Touch Panel PC
Features
KS201 7" Touch Panel PC
Panel
• TI® AM3517 Sitara ARM Cortex-A8
RS232 COM
USB
14-30V DC-in
• 7" WVGA Touch Screen Fanless Panel PC
• 512MB DDR2 onboard
• 512MB NAND Flash onboard
Top View
• 1 LAN, 2 USB, 2 COM, 1 SD/MMC, 12-bit GPIO
Fanless
Line-Out
12-bit GPIO
SD/MMC
• 4 customizable function keys
LAN
Power Switch
RS232/422/485 COM
Bottom View
Customizable
Function Keys
Function Keys
System Specifications
MEMORY
• 512MB DDR2 onboard
- 4 DDR2 64Mx16 RAM
LCD and TOUCH SCREEN
• 7” (800x480) WVGA TFT touch screen LCD
• Supports touch screen
- TI® TSC2004 touch screen controller
• 400 NITS
• 4-Wire Resistive type
STORAGE
• 1 SD/MMC card socket
• 512MB NAND Flash
- Samsung K9F4G08U0D flash memory 512Mx 8bit (512MB)
ETHERNET
• LAN8710 10/100Mbps LAN chip
• 1 LAN port
• Supports 10BASE-T and 100BASE-T
AUDIO
• 1 Line-out
COM
• 1 RS232/422/485 COM port
• 1 RS232 COM port
USB
• 1 TUSB1210 USB transceiver
• 2 Type A USB 2.0/1.1 ports
GPIO
• 12-bit GPIO connector
POWER
• Power input voltage
- 14~30Vdc (+/-5%) input
16
ENVIRONMENT
• Temperature
- Operating: -20oC ~ 65oC
- Storage: -30oC ~ 80oC
• Relative Humidity
- 95% RH at 65oC, 1 week
• Corrosion
- 4 periods of 7 days at 65oC with 90-95% relative humidity after 2
hours salt spray or waiver
I/O PORTS
• Front
- 1 Power LED
- 4 function keys
• Top
- 1 SD/MMC card socket
• Bottom
- 12-bit GPIO (2 7-pole terminal blocks)
- 1 Line-out
- 1 DB-9 RS232 COM
- 1 RJ45 10/100Mbps LAN with LEDs
- 2 USB 2.0 (Type A)
- 1 DB-9 RS232/422/485 COM
- 1 DC-in (2-pole Phoenix terminal block)
- 1 power switch
Power LED
Front View
Dimensions
FRONT PANEL PROTECTION
• IP65 (Dust Tight; Water Proof protection)
214.60
CONSTRUCTION
• Aluminum front bezel, Rugged metal housing
MOUNTING
•Wall mount (VESA 75x75)
•Panel mount (Mounting clamp)
Top View
235.00
DIMENSIONS
• 235mm x 150mm x 40.8mm (W x H x D)
WEIGHT
• 2.10 kg
150.00
PROCESSOR SYSTEM
• TI® AM3517 Sitara ARM Cortex-A8
OS SUPPORT
• Windows CE 6.0
• Android 2.1
• Linux 2.6.x
CERTIFICATION
• CE
• FCC Class B
• Compliant with IEC 60945 (Protected B)
Left View
Front View
Right View
40.80
Bottom View
17
KS201 7" Touch Panel PC
KS201 7" Touch Panel PC
Mounting
Packing List
• 1 KS201 Touch Panel PC
Wall Mounting
• 1 Poron foam
• 3 Terminal blocks
•1 19V power adapter
• 1 Quick Installation Guide
• 1 CD disk includes:
- Manual
Ordering Information
Model Name
Part Number
Description
KS201
750-KS2010-000G
7" Panel PC, TI® AM3517 ARM, Aluminum Front Bezel with function keys,
Resistive Touch, DC input, R10
Optional Items
Part Number
Description
Wall Mount
785-PPCWMK
Standard Panel PC Wall Mount kit
Panel Mount
785-070PMK
7" Panel PC Panel Mount kit
Power Cord
785-PWRD
Power cord, Standards (USA/EUR/CH), 1.8m, RoHS
Optional Items
Panel Mounting
Suggested cut out size
(The flat panel thickness is less than 10mm)
128.60
21
7.6
0
18
19
KS202 7" Open Frame Touch Panel PC
Features
KS202 7" Open Frame Touch Panel PC
Panel
• TI® AM3517 Sitara ARM Cortex-A8
RS232 COM
• 7" WVGA Touch Screen Fanless Panel PC
USB
14-30V DC-in
• 512MB DDR2 onboard
• 512MB NAND Flash onboard
• 1 LAN, 2 USB, 2 COM, 1 SD/MMC, 12-bit GPIO
12-bit GPIO Line-Out
SD/MMC
Top View
ETHERNET
• LAN8710 10/100Mbps LAN chip
• 1 LAN port
• Supports 10BASE-T and 100BASE-T
FRONT PANEL PROTECTION
• IP65 (Dust Tight; Water Proof protection)
COM
• 1 RS232/422/485 COM port
• 1 RS232 COM port
WEIGHT
• 1.90 kg
POWER
• Power input voltage
- 14~30Vdc (+/-5%) input
ENVIRONMENT
• Temperature
- Operating: -20oC ~ 65oC
- Storage: -30oC ~ 80oC
• Relative Humidity
- 95% RH at 65oC, 1 week
• Corrosion
- 4 periods of 7 days at 65oC with 90-95% relative humidity after 2
hours salt spray or waiver
Left View
95.00
90.00
190.00
Front View
11.20
35.80
75.00
75.00
93.40 (V,A FOR T/P)
133.00
90.00
65.85
20.20
92.04 (A,A FOR T/P)
Ø3.50
125.60
230.40
221.00
190.00
154.40 (V,A FOR T/P)
153.00 (A,A FOR T/P)
Right View
20.20
Bottom View
MOUNTING
•VESA 75x75
DIMENSIONS
• 230.40mm x 142.32mm x 35.8mm (W x H x D)
GPIO
• 12-bit GPIO connector
Top View
CONSTRUCTION
• Aluminum front bezel, Rugged metal housing
AUDIO
• 1 Line-out
USB
• 1 TUSB1210 USB transceiver
• 2 Type A USB 2.0/1.1 ports
20
I/O PORTS
• Front
- 1 Power LED
• Top
- 1 SD/MMC card socket
• Bottom
- 12-bit GPIO (2 7-pole terminal blocks)
- 1 Line-out
- 1 DB-9 RS232 COM
- 1 RJ45 10/100Mbps LAN with LEDs
- 2 USB 2.0 (Type A)
- 1 DB-9 RS232/422/485 COM
- 1 DC-in (2-pole Phoenix terminal block)
- 1 power switch
20.99
4.49
STORAGE
• 1 SD/MMC card socket
• 512MB NAND Flash
- Samsung K9F4G08U0D flash memory 512Mx 8bit (512MB)
214.60
142.32
LCD and TOUCH SCREEN
• 7” (800x480) WVGA TFT touch screen LCD
• Supports touch screen
- TI® TSC2004 touch screen controller
• 400 NITS
• 4-Wire Resistive type
Power Switch
Bottom View
Open Frame Panel PC for easy
integration into a customized enclosure
System Specifications
MEMORY
• 512MB DDR2 onboard
- 4 DDR2 64Mx16 RAM
RS232/422/485COM
Dimensions
Fanless
PROCESSOR SYSTEM
• TI® AM3517 Sitara ARM Cortex-A8
LAN
OS SUPPORT
• Windows CE 6.0
• Android 2.1
• Linux 2.6.x
CERTIFICATION
• CE
• FCC Class B
• Compliant with IEC 60945 (Protected B)
Packing List
• 1 KS202 Touch Panel PC
• 1 Poron foam
• 3 Terminal blocks
•1 19V power adapter
• 1 Quick Installation Guide
• 1 CD disk includes:
- Manual
Ordering Information
Model Name
Part Number
Description
KS202
750-KS2020-000G
7" Panel PC, TI® AM3517 ARM, Resistive Touch, DC input, R10
Optional Items
Part Number
Description
Wall Mount
785-PPCWMK
Standard Panel PC Wall Mount kit
Power Cord
785-PWRD
Power cord, Standards (USA/EUR/CH), 1.8m, RoHS
Optional Items
21
Established in 1981, DFI® is a leading supplier of high-performance computing
technology worldwide. With more than 30 years of experience, DFI® focuses
on innovative design and manufacture of leading-edge board and system level
products for embedded applications requiring strict revision control and long
life availability. DFI® uses the latest technology platforms and manufacturing
techniques to produce cost-effective products for use in medical diagnostic
& imaging, ATM/POS, industrial control, kiosk, security & surveillance, digital
signage, gaming, and other embedded applications. As an Associate member
of the Intel ® Embedded Alliance (IEA), DFI ® works closely with Intel ® on
development of next-generation standards-based building blocks, platforms and
solutions for the communications and embedded market segments.
All product specifications are subject to change without notice.
Intel® and Atom™ are registered trademarks of Intel® Corporation in the U.S.
and other countries.
AMD® is a registered trademark of the Advanced Micro Devices, Inc. in the U.S.
and other countries.
Other names are for informational purpose only and are trademarks of their
respective owners.
For more information on the 7" Touch Panel PC,
please visit: www.dfi.com
DFI Inc.
100, Huanhe St., Xizhi Dist.,
New Taipei City 22154, Taiwan (R.O.C.)
Tel: +886(2)2694-2986
Fax: +886(2)2694-5815
E-Mail: inquiry@dfi.com.tw
Website: http: //www.dfi.com
All product names mentioned are trademarks or registered trademarks of their respective companies.
All specifications are subject to change without prior notice. © DFI Inc.
Download PDF