Beko | CFMD7852X | Instruction manual | Beko CFMD7852X Instruction manual

CFMD7852X
Please read this manual first!
Dear Customer,
We hope that your product, which has been produced in a 1st-class manufacturing
facility and checked under the most meticulous quality control procedures, will provide you
with years of good service.
For this, we recommend you to carefully read the entire manual of your product before
using it and keep it at hand for future reference.
This manual
• Will help you use your appliance quickly and safely.
• Read the manual before installing and operating your product.
• Follow the instructions, especially those for safety.
• Keep the manual in an easily accessible place as you may need it later.
• Besides, read also the other documents provided with your product.
Please note that this manual may be valid for other models as well.
Symbols and their descriptions
This instruction manual contains the following symbols:
C Important information or useful usage tips.
AWarning against dangerous conditions for life and property.
BWarning against electric voltage.
1
EN
1 Refrigerator 3 5 Using your refrigerator 11
2 Warnings
4 Water Dispenser...............................16
Indicator Panel..................................11
Electrical requirements........................5
Warning! This appliance must be
earthed...............................................5
Energy saving tips..............................5
Compliance with WEEE Directive and
Disposing of the Waste Product: .......6
Compliance with rohs directive:.........6
Package information...........................6
Recommendations for the fresh food
compartment......................................7
3 Installation
8
Points to be paid attention to when the
relocation of the cooler/freezer............8
Before you start the cooler/freezer,.....8
Electrical connection...........................8
Disposing of the packaging................9
Disposing of your old cooler/freezer....9
Placing and Installation.......................9
Adjusting the legs...............................9
Changing the illumination lamp ..........9
4 Preparation
Freezing fresh food...........................18
Recommendations for preservation of
frozen food.......................................18
Defrosting.........................................18
Placing the food...............................18
Deep-freeze information...................19
Door Open Warning..........................19
Egg holder........................................20
Blue light..........................................20
Rotary storage container..................20
Multi Zone Storage Compartment ..21
Telescopic Drawer ...........................22
Description and cleaning of odor
filter:.................................................22
6 Maintenance and
cleaning
Protection of plastic surfaces . .........23
7 Troubleshooting
10
2
23
EN
24
1 Refrigerator
Congratulations on your choice a BEKO quality Appliance which has been designed to
give you service for many years.
1
2
11
10
9
15
*8
*3
7
4
5
14
6
12
13
13
1. Egg holder
9. Illumination lens
2. Fridge compartment shelf
10. Adjustable glass shelves
3. Sliding and Rotary storage containers
11. Fan
4. Bottle shelf
12. Ice container
5. Multizone Compartment's drawer
13. Separators
6. Freezer Compartment's drawer
14. Freezer compartment
7. Crisper (Snack Compartment)
15. Fridge compartment
* OPTIONAL
8. Bottle holder
C Figures that take place in this instruction manual are schematic and may not correspond
exactly with your product. If the subject parts are not included in the product you have
purchased, then it is valid for other models.
3
EN
2 Warnings
• To obtain the best possible performance
and trouble free operation from your
appliance it is very important to carefully
read these instructions.
• Do not connect your appliance to the
electricity supply until all packing and
transit protectors have been removed.
• If transported horizontally leave to
stand upright for at least 4 hours before
switching on to allow compressor oil to
settle
• On delivery, check to make sure that
the product is not damaged and that all
the parts and accessories are in perfect
condition.
• If you are discarding an old refrigerator
with a lock or latch fitted to the door,
disable the lock/latch, ensure that it is
left in a safe condition to prevent the
entrapment of young children.
• Ensure that the plug remains readily
accessible. Do not use multiple adapter or
extension cable.
• Failure to observe these instructions may
invalidate your right to free service during
the guarantee period.
• This fridge/freezer must only be used for
its intended purpose i.e the storing and
freezing of edible foodstuff.
• Do not dispose of the appliance on a
fire. At BEKO, the care and protection
of our environment is an ongoing
commitment. This appliance which is
among the latest range introduced is
particularly environment friendly. Your
appliance contains non CFC / HFC
natural substances in the cooling system
(Called R600a) and in the insulation
(Called cyclopentane) which are potentially
flammable if exposed to fire. Therefore,
take care not to damage, the cooling
circuit / pipes of the appliance in
transportation and in use. In case of
damage do not expose the appliance
to fire or potential ignition source and
immediately ventilate the room where the
appliance is situated.
• We suggest you contact your local
authority for disposal information and
facilities available.
• See Installation Instructions on page 8 for
information on suitable location.
4
• Keep ventilation openings, in the
appliance enclosure or in the built-in
structure, clear of obstruction.
• Do not use mechanical devices or other
means to accelerate the defrosting
process, other than those recommended
by the manufacturer.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside
the food storage compartments of the
appliance, unless they are of the type
recommended by the manufacturer.
• We suggest you keep these instructions in
a safe place for easy reference.
• This appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved. Children
shall not play with the appliance. Cleaning
and user maintenance shall not be made
by children without supervision.
EN
• Children should be supervised to ensure
that they do not play with the appliance.
Electrical requirements
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown on the rating plate
inside the appliance corresponds to your
electricity supply.
Rating label is on the left hand side of
fridge inner liner.
We recommend that this appliance be
connected to the mains supply via a
suitable switched and fused socket. The
appliance must be positioned so that the
plug is accessible.
Should the mains lead of the appliance
become damaged or should it need
Replacing at any time, it must be replaced
by a special purpose made mains lead
which can only be obtained from a BEKO
authorised service agent.
Warning! This appliance
must be earthed
Important! Fitting A Different Plug
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals in your plug proceed as follows:
(See diagram).
1. Connect the green-yellow or green (Earth)
wire to the terminal in the plug marked ‘E’
or with the symbol
or coloured green
and yellow or green.
2. Connect the blue (Neutral) wire to
the terminal in the plug marked ‘N’ or
coloured black.
3. Connect the brown (Live) wire to the
terminal in the plug marked ‘L’ or coloured
red.
With alternative plugs a 13 A fuse must be
fitted either in the plug or adaptor or in the
main fuse box. If in doubt contact a qualified
electrician.
Energy saving tips
1. Ensure your appliance is installed in a well
ventilated area.
2. Ensure the time between buying chilled/
frozen food and placing them in your
appliance is kept at minimum, particularly
in summer. We recommend you use a
cool bag or a special carrier bag to carry
perishable food.
12mm.
22mm.
CORD GRIP
5
EN
FUSE
6mm.
N
BLUE
OR
BLACK
L
BROWN
OR
RED
FITTED WITH
BS 1362 13A FUSE ALWAYS
FIT BS 1362 REPLACEMENT
CARTRIDGE FUSE
6mm.
32mm.
GREEN &
YELLOW
OR
GREEN
6mm.
If the fitted moulded plug is not suitable for
your socket, then the plug should be cut off
and an appropriate plug fitted. Destroy the
old plug which is cut off as a plug with bared
cord could cause a shock hazard if inserted
into a socket elsewhere in the house.
The moulded plug on this appliance
incorporates a 13 A fuse. Should the
fuse need to be replaced an ASTABEAB
approved BS 1362 fuse of the same rating
must be used. Do not forget to refit the
fuse cover. In the event of losing the fuse
cover the plug must not be used until a
replacement fuse cover has been fitted.
Colour of the replacement fuse cover must
be the same colour as that visible on the pin
face of the plug. Fuse covers are available
from any good electrical store.
3. Do not leave the door (s) of your appliance
open longer than necessary and ensure
they are closed properly after each
opening.
4. Defrost frozen food in the fridge
compartment, so that frozen food acts as
an ice pack to assist cooling in the fridge.
5. Energy consumption of this appliance is
Compliance with rohs
directive:
The product you have purchased complies
with EU RoHS Directive (2011/65/EU). It
does not contain harmful and prohibited
materials specified in the Directive.
Package information
Packaging materials of the product
are
manufactured
from
recyclable
materials in accordance with our National
Environment Regulations. Do not dispose
of the packaging materials together with
the domestic or other wastes. Take them
to the packaging material collection points
designated by the local authorities.
measured while freezer compartment is
loaded without use of top shelf lid and
the drawers except the bottom drawer.
It is advised that freezer compartment is
loaded without use of drawers except
the bottom drawer in order to achieve
maximum loading capacity.
Compliance with WEEE
Directive and Disposing of
the Waste Product:
This product complies with EU WEEE
Directive (2012/19/EU). This
product bears a classification
symbol for waste electrical and
electronic equipment (WEEE).
This
product
has
been
manufactured with high quality
parts and materials which can
be reused and are suitable for recycling. Do
not dispose of the waste product with
normal domestic and other wastes at the
end of its service life. Take it to the collection
center for the recycling of electrical and
electronic equipment. Please consult your
local authorities to learn about these
collection centers.
6
EN
Recommendations for the
fresh food compartment
*optional
• Do not allow the food to touch
the temperature sensor in fresh food
compartment. To allow the fresh food
compartment keep its ideal storage
temperature, sensor must not be hindered
by food.
• Do not place hot foods in the product.
MILK
juice
etc.
food
temperature
sensor
MILK
temperature
sensor
7
juice
etc.
EN
temperature
sensor
3 Installation
BIn case the information which are given
in the user manual are not taken into
account, manufacturer will not assume
any liability for this.
Points to be paid attention
to when the relocation of the
cooler/freezer
1. Your cooler/freezer should be unplugged.
Before transportation of your cooler/
freezer, it should be emptied and cleaned.
2. Before it is re-packaged, shelves,
2. Clean the interior of the cooler/freezer as
accessories, crisper, etc. inside your
cooler/freezer should be fixed with
adhesive tape and secured against
impacts. Package should be bound
with a thick tape or sound ropes and
the transportation rules on the package
should be strictly observed.
recommended in the “Maintenance and
cleaning” section.
3. Connect the plug of the cooler/freezer to
the wall socket. When the fridge door is
opened, fridge internal lamp will turn on.
4. When the compressor starts to operate, a
3. Original packaging and foam materials
sound will be heard. The liquid and gases
sealed within the refrigeration system
may also give rise to noise, even if the
compressor is not running and this is quite
normal.
should be kept for future transportations
or moving.
Before you start the cooler/
freezer,
Check the following before you start to
use your cooler/freezer:
1. Attach 2 plastic wedges as illustrated
below. Plastic wedges are intended to
keep the distance which will ensure the
air circulation between your cooler/freezer
and the wall. (The picture is drawn up as
a representation and it is not identical with
your product.)
5. Front edges of the cooler/freezer may
feel warm. This is normal. These areas
are designed to be warm to avoid
condensation.
Electrical connection
Connect your product to a grounded
socket which is being protected by a fuse
with the appropriate capacity.
Important:
The connection must be in compliance
with national regulations.
• The power plug must be easily accessible
after installation.
8
• Electrical safety of your cooler/freezer shall
be guaranteed only if the earth system in
your house complies with standards.
EN
1. Install your cooler/freezer to a place that
• The voltage stated on the label located at
left inner side of your product should be
equal to your network voltage.
allows ease of use.
2. Keep your cooler/freezer away from heat
• Extension cables and multi plugs
sources, humid places and direct sunlight.
must not be used for connection.
3. There must be appropriate air ventilation
BA damaged power cable must be
around your cooler/freezer in order to
achieve an efficient operation. If the cooler/
freezer is to be placed in a recess in the
wall, there must be at least 5 cm distance
with the ceiling and at least 5 cm with the
wall. Do not place your product on the
materials such as rug or carpet.
replaced by a qualified electrician.
BProduct must not be operated before it is
repaired! There is the risk of electric shock!
Disposing of the packaging
The packing materials may be dangerous
for children. Keep the packing materials out
of the reach of children or dispose of them
by classifying them in accordance with
the waste instructions stated by your local
authorities. Do not throw away with regular
house waste, throw away on packaging
pick up spots designated by the local
authorities.
The packing of your cooler/freezer is
produced from recyclable materials.
Disposing of your old cooler/
freezer
Dispose of your old cooler/freezer without
giving any harm to the environment.
• You may consult your authorized dealer
or waste collection center of your
municipality about the disposal of your
cooler/freezer.
4. Place your cooler/freezer on an even floor
surface to prevent jolts.
Adjusting the legs
If your refrigerator is unbalanced;
You can balance your refrigerator by
turning its front legs as illustrated in the
figure. The corner where the leg exists is
lowered when you turn in the direction of
black arrow and raised when you turn in
the opposite direction. Taking help from
someone to slightly lift the refrigerator will
facilitate this process.
Before disposing of your cooler/freezer,
cut out the electric plug and, if there are any
locks on the door, make them inoperable in
order to protect children against any danger.
Changing the illumination
lamp
Placing and Installation
A If the entrance door of the room where
To change the Bulb/LED used for
illumination of your refrigerator, call your
Authorized Service.
the cooler/freezer will be installed is not
wide enough for the cooler/freezer to pass
through, then call the authorized service to
have them remove the doors of your cooler/
freezer and pass it sideways through the
door.
9
EN
4 Preparation
• Your cooler/freezer should be installed at
least 30 cm away from heat sources such
as hobs, ovens, central heater and stoves
and at least 5 cm away from electrical
ovens and should not be located under
direct sunlight.
• The ambient temperature of the room
where you install your cooler/freezer
should at least be 10°C. Operating your
cooler/freezer under cooler conditions
is not recommended with regard to its
efficiency.
• Please make sure that the interior of your
cooler/freezer is cleaned thoroughly.
• If two cooler/freezers are to be installed
side by side, there should be at least 2 cm
distance between them.
• When you operate your cooler/freezer for
the first time, please observe the following
instructions during the initial six hours.
• The door should not be opened
frequently.
• It must be operated empty without any
food in it.
• Do not unplug your cooler/freezer.
If a power failure occurs out of your
control, please see the warnings in
the “Recommended solutions for the
problems” section.
• Original packaging and foam materials
should be kept for future transportations
or moving.
10
EN
5 Using your refrigerator
Indicator Panel
Indicator panels may vary depending on your product's model.
Indicator panel aids in using your refrigerator with its audio and visual functions.
1.
2.
3.
4.
5.
1
2
9
8
3
7
4
6
6.
Ioniser Indicator
Fridge Compartment Indicator
Error Status Indicator
Temperature Indicator
Temperature Setting / Vacation Button
7.
8.
9.
1. Ioniser Indicator
Indicator light lights up continuously.
This light indicates that your refrigerator is
protected against the bacteria.
2. Fridge Compartment Indicator
Fridge compartment light illuminates
when adjusting the fridge compartment
temperature.
5
efrigerator Compartment Selection
R
Button
Multizone Compartment Indicator
Freezer Compartment Indicator
Economy Mode Indicator
3. Error Status Indicator
If your refrigerator does not cool adequately
or if there is a sensor failure, this indicator
will be activated. When this indicator is
active, temperature indicator will display "e"
and the numbers 1,2,3... These numbers
on the indicator provide information about
the error to the service personnel.
C Figures that take place in this instruction manual are schematic and may not correspond
exactly with your product. If the subject parts are not included in the product you have
purchased, then it is valid for other models.
11
EN
4. Temperature Indicator
Indicates the temperatures of fridge,
freezer multizone compartment.
5. Temperature Setting / Vacation
Button
After selecting the compartment for which
you will set the temperature, perform the
temperature setting by means of pressing
this button.
Press and hold the same button for 3
seconds to activate the Vacation function for
the fridge compartment. Press this button
again to deactivate the selected function.
If this function is active, "- -" appears
on the temperature indicator of the
fridge compartment and no cooling is
performed in the fridge compartment. Other
compartments will be cooled in accordance
with the temperature set for them.
6. Refrigerator Compartment Selection
Button
Press Refrigerator Compartment Selection
Button to switch between fridge, freezer
and multizone compartments.
7. Multizone Compartment Indicator
Multizone compartment light illuminates
when adjusting the multizone compartment
temperature.
8. Freezer Compartment Indicator
Freezer compartment light illuminates
when adjusting the freezer compartment
temperature.
9. Economy Mode Indicator
Indicates that the refrigerator is running
in energy-efficient mode. This indicator
will be active if the temperature of Freezer
Compartment is set to -18 and energy
efficient cooling is being performed.
12
EN
16
15
14
1
13
2
12
11
3
10
9
4
5
6
8
7
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Quick fridge function indicator
11. Quick fridge function button
12. Freezer compartment temperature setting
Freezer compartment setting button
Multizone compartment setting button
Fridge compartment setting button
indicator
Error status indicator
13. Multizone compartment temperature
Key lock indicator
setting indicator
Eco Extra Function indicator
14. Fast freeze function button
15. Fridge compartment temperature setting
Eco Extra / Vacation Button
Vacation function indicator
indicator
Economic usage indicator
16. Fast Freeze Function Indicator
C Figures that take place in this instruction manual are schematic and may not correspond
exactly with your product. If the subject parts are not included in the product you have
purchased, then it is valid for other models.
13
EN
1- Freezer Compartment Setting
This function allows you to set the freezer
compartment temperature. Press this
button to set the temperature of the freezer
compartment to -18,-19, -20,-21,-22,-23
and -24, respectively.
2. Multi Zone Storage Compartment
Temperature Setting Button
You can set the Multi Zone Storage
Compartment either as a Freezer or a
Cooler. Press and hold this button for 3
seconds to set the Multi Zone Storage
Compartment either as a Freezer or a
Cooler. This compartment is set as a
Freezer Compartment at factory.
If the Multi Zone Storage Compartment
is set as a Freezer, then the temperature of
the Multi Zone Storage Compartment will
change as -18,-19,-20,-21,-22,-23,-24,
-18... respectively each time you press this
button. If the Multi Zone Compartment is
set as a Fridge, then the temperature of the
Multi Zone Compartment will change as 10,
8, 6, 4, 2, 0, -6, ... respectively each time
you press this button.
3- Fridge Compartment Setting Button
This function allows you to make the
fridge compartment temperature setting.
Press this button to set the temperature
of the fridge compartment to 8,7,6,5,4,3,2
respectively.
4-. Error Status Indicator
If your refrigerator does not cool
adequately or if there is a sensor failure,
this indicator will be activated. When this
indicator is active, Freezer Compartment
Temperature indicator will display "E" and
Fridge Compartment Temperature Indicator
will display numbers such as "1,2,3…".
These numbers on the indicator provide
information about the error to the service
personnel.
When you place hot food into the freezer
compartment or if you leave the door open
for a long time, exclamation mark can
illuminate for some time. This is not a failure;
this warning will disappear when the food
cools down.
14
5. Key Lock Indicator
Use this function if you do not want your
refrigerator temperature setting changed.
To activate this function, you should press
and hold Fast Freeze and Quick Fridge
buttons together for 3 seconds.
6-. Eco Extra Function Indicator
It indicates that the Eco-Extra function is
active.
If this function is active, your refrigerator
will automatically detect the least usage
periods and energy-efficient cooling will be
performed during those times. Economy
indicator will be active while energy-efficient
cooling is performed.
Press the relevant button again to
deactivate this function.
7-. Eco Extra / Vacation Button
Press this button briefly to activate the Eco
Extra function. Press and hold this button
for 3 sec. to activate the Vacation function.
Press this button again to deactivate the
selected function.
8-. Vacation Function Indicator
Indicates that the vacation function is
active.
If this function is active, "- -" appears
on the temperature indicator of the
fridge compartment and no cooling is
performed in the fridge compartment. Other
compartments will be cooled in accordance
with the temperature set for them.
Press the relevant button again to
deactivate this function.
9- Economy Mode Indicator
Indicates that the refrigerator is running
in
energy-efficient
mode.
Freezer
Compartment temperature
This indicator will be active if the function
is set to -18 or the energy efficient cooling is
being performed due to Eco-Extra function.
EN
10- Quick Fridge Indicator
This icon flashes in an animated style
when the Quick Fridge function is active.
11- Quick Fridge Function
When you press the Quick Fridge button,
the temperature of the compartment will be
colder than the adjusted values.
This function can be used for food placed
in the fridge compartment and required to
be cooled down rapidly.
If you want to cool large amounts of fresh
food, it is recommended to activate this
feature before putting the food into the
fridge.
Quick Fridge indicator turns on when the
Quick Fridge function is on. To cancel this
function, press Quick Fridge button again.
If you do not cancel it, Quick Fridge will
cancel itself automatically after 2 hours or
when the fridge compartment reaches to
the required temperature.
This function is not recalled when power
restores after a power failure.
12- Freezer Compartment
Temperature Setting Indicator
Indicates the temperature set for the
Freezer Compartment.
13-Multi Zone Storage Compartment
Temperature Indicator
Indicates the temperature set for Multi
Zone storage compartment.
14- Fast Freeze Function
Fast Freeze indicator turns on when the
Fast Freeze function is active. To cancel
this function, press Fast Freeze button
again. Fast Freeze indicator will turn off
and return to its normal settings. If you
do not cancel it, Fast Freeze will cancel
itself automatically after 8 hours or when
the freezer compartment reaches to the
required temperature.
15
If you want to freeze large amounts of
fresh food, press the Fast Freeze button
before putting the food into the freezer
compartment.
If you press the Fast Freeze button
repeatedly with short intervals, the electronic
circuit protection will be activated and the
compressor will not start up immediately.
This function is not recalled when power
restores after a power failure.
15- Fridge Compartment Temperature
Setting Indicator
Indicates the temperature set for the
Fridge Compartment.
16- Fast Freeze Indicator
This icon flashes in an animated style
when the Fast Freeze function is active.
EN
Water Dispenser
(in some models)
Water dispenser is a very useful feature
based on reaching cold water without
opening the door of your refrigerator. As you
will not have to open your refrigerator door
frequently, you will have saved energy.
Using the water spring
Push the arm of the water dispenser
with your glass. The dispenser will cease
operating once you release the arm.
When operating the water dispenser,
maximum flow can be obtained by pressing
the arm fully. Please remember that the
amount of flow from the dispenser is subject
to the degree you press the arm.
As the level of the water in your glass/
container rises, slightly lessen the pressure
on the arm to prevent the overspill. If you
slightly press the arm, the water will drip;
this is quite normal and not a failure.
16
Filling the water dispenser's tank
Water tank filling reservoir is located inside
the door rack. Open the reservoir cover and
fill in clean potable water. And then, close
the lid.
Warning!
• Do not fill the water tank with any other
liquid except for water such as fruit
juices, carbonated beverages or alcoholic
drinks which are not suitable to use in
the water dispenser. Water dispenser will
be irreparably damaged if these kinds of
liquids are used. Warranty does not cover
such usages. Some chemical substances
and additives contained in these kinds of
drinks/liquids may damage the water tank.
EN
• Use clean and pure potable water only.
• Capacity of the water tank is 3 liters; do
not overfill.
• Push the arm of the water dispenser with
a rigid glass. If you are using disposable
plastic glasses, push the arm with your
fingers from behind the glass.
Cleaning the water tank
• Remove the water filling reservoir inside
the door rack.
• Remove the door rack by holding from
both sides.
• Grab the water tank from both sides and
remove it with an angle of 45°C.
• Clean the water tank by removing its lid.
Important:
Components of the water tank and
water dispenser should not be washed in
dishwasher.
Water tray
Water that dripped while using the water
dispenser accumulates in the spillage tray.
Take out the plastic strainer as shown in
the figure.
With a clean and dry cloth, remove the
water that has accumulated
CAUTION: Connect only to a potable
water line.
17
EN
Freezing fresh food
Recommendations for
preservation of frozen food
• Wrap or cover the food before placing
them in .
• Pre-packed commercially frozen food
should be stored in accordance with the
frozen food manufacturer's instructions in
a frozen food storage compartment.
• Hot food must cool down to the room
temperature before putting them in the
refrigerator.
• To ensure that the high quality supplied
by the frozen food manufacturer and the
food retailer is maintained, following points
should be noted:
• The foodstuff that you want to freeze
must be fresh and in good quality.
• Foodstuff must be divided into portions
according to the family’s daily or meal
based consumption needs.
1.Put packages in the freezer as quickly as
possible after purchase.
2.Ensure that contents of the package are
labeled and dated.
3. Do not exceed "Use By", "Best Before"
dates on the packaging.
• Foodstuff must be packaged in an
airtight manner to prevent them from
drying even if they are going to be kept for
a short time.
• Materials to be used for packagings
must be resistant to cold and humidity
and they must be airtight. The packaging
material of the food must be at a sufficient
thickness and durability. Otherwise the
food hardened due to freezing may
puncture the packaging. It is important for
the packaging to be closed securely for
safe storage of the food.
Defrosting
The freezer
automatically.
compartment
defrosts
Placing the food
Freezer
compartment
shelves
• Frozen food must be used immediately
after they are thawed and they should
never be re-frozen.
Egg section
• Please observe the following instructions
to obtain the best results.
1. If the fridge has a quick freeze function,
activate the quick freeze function when
you want to freeze the food.
2. Do not freeze too large quantities of
food at one time. The quality of the food
is best preserved when it is frozen right
through to the core as quickly as possible.
3. Take special care not to mix already
frozen food and fresh food.
4. Make sure raw foods are not in contact
with cooked foods in the fridge.
EN
Egg
Fridge
compartment
shelves
Food in pans,
covered plates and
closed containers
Door shelves
of fridge
compartment
Small and packaged
food and drinks (such
as milk, fruit juice and
beer)
Crisper
Vegetables and fruits
Freshzone
compartment
18
Various frozen food
such as meat, fish, ice
cream, vegetables and
etc.
Delicatessen
products (cheese,
butter, salami and etc.)
F r e e z e r
Compartment
Setting
-18°C
-20, -22
-24°C
F r i d g e
Compartment
Setting
4°C
or
4°C
Remarks
This is the normal recommended setting.
These settings are recommended when the
ambient temperature exceeds 30°C.
Quick Freeze
4°C
Use when you wish to freeze your food in a short
time. If is recommended to be used to maintain the
quality of meat and fish products.
-18°C or colder
2°C
If you think that your fridge compartment is not
cold enough because of the hot conditions or
frequent opening and closing of the door.
You can use it when your fridge compartment is
overloaded or if you wish to cool down your food
-18°C or colder
Quick Fridge
rapidly. It is recommended that you activate the
quick freeze function 4-8 hours before placing the
food.
Materials necessary for packaging:
Deep-freeze information
• Cold resistant adhesive tape
Food must be frozen as rapidly as possible
• Self-adhesive label
when they are put in the freezer in order to
• Rubber rings
keep them in good quality.
• Pen
The TSE norm requires (according to
Materials to be used for packaging the
certain measurement conditions) the foodstuff must be tear-proof and resistant
refrigerator to freeze at least 4.5 kg of to cold, humidity, dour, oils and acids.
foodstuff at 32°C ambient temperature to
Foodstuff to be frozen should not be
-18°C or lower within 24 hours for every allowed to come in contact with the
100-liters of freezer volume.
previously frozen items to prevent their
It is possible to preserve the food for a long partial thawing. Thawed out food must
time only at -18°C or lower temperatures.
be consumed and must not be frozen again.
You can keep the freshness of food
Door Open Warning
for many months (at -18°C or lower
temperatures in the deep freeze).
(This feature may vary depending
WARNING! A
on the door of the product and may
• Foodstuff must be divided into portions
not exist in some models.)
according to the family’s daily or meal based
An audio warning signal will be given when
consumption needs.
the door of your product is left open for at
• Foodstuff must be packaged in an
least 1 minute. This warning will be muted
airtight manner to prevent them from drying
when the door is closed or any of the display
even if they are going to be kept for a short
buttons (if any) are pressed.
time.
19
EN
Egg holder
Rotary storage container
You can install the egg holder to the
desired door or body shelf.
Never store the egg holder in the freezer
compartment
Sliding body shelf can be moved to left
or right in order to allow you place the tall
bottles, jars or boxes to the lower shelf (Fig.
1)
You can reach the food that you have
placed into the shelf by grabbing and
turning it from its right edge (Fig.2).
When you want to load or remove it to
clean, turn it by 90 degrees, raise it up and
pull towards yourself (Fig. 3-4).
Blue light
(in some models)
Foodstuff stored in the crispers that are
enlightened with a blue light continue their
photosynthesis by means of the wavelength
effect of blue light and thus, preserve
their freshness and increase their vitamin
content.
1
2
3
4
20
EN
Multi Zone Storage
Compartment
The Multi Zone Storage Compartment
of your refrigerator may be used in any
desired mode by adjusting it to fridge
(2/4/6/8 °C) or freezer (-18/-19/-20/21/-22/-23/-24) temperatures. You can
keep the compartment in the desired
temperature with the Multi Zone Storage
Compartment Temperature Setting Button.
The temperature of Multi Zone Storage
Compartment can be adjusted to -6, -2, 0
and 10 in addition to fridge compartment
temperatures. "0" degree is used to store
the deli products longer, and -6 degrees is
used to keep the meats up to 2 weeks in an
easily cuttable condition.
21
EN
Telescopic Drawer
Description and cleaning of
odor filter:
Pay attention not to squeeze any parts
of your body such as hands, feet and etc.
between the movable parts while the drawer
is in use in order to avoid any injury.
You can remove the partition in the drawer
as illustrated when you want to clean it.
You can remove the drawers only for
cleaning. It is not possible to group the
drawers in their places after loading them
with food when they are removed.
Odor filter prevents unpleasant odor buildup in your refrigerator.
Pull the cover, into which the odor filter
is installed, downwards and remove as
illustrated. Leave the filter under sunlight
for one day. Filter will be cleaned during this
time. Install the filter back to its place.
Odor filter must be cleaned once in a year.
22
EN
6 Maintenance and cleaning
ANever use gasoline, benzene or similar
ANever use cleaning agents or water
substances for cleaning purposes.
that contain chlorine to clean the outer
surfaces and chromium coated parts of
the product. Chlorine causes corrosion on
such metal surfaces.
BWe recommend that you unplug the
appliance before cleaning.
BNever use any sharp abrasive instrument,
soap, household cleaner, detergent and
wax polish for cleaning.
C Use lukewarm water to clean the cabinet
of your cooler/freezer and wipe it dry.
Protection of plastic
surfaces
C Do not put the liquid oils or oil-cooked
meals in your cooler/freezer in unsealed
containers as they damage the plastic
surfaces of your cooler/freezer. In case
of spilling or smearing oil on the plastic
surfaces, clean and rinse the relevant part
of the surface at once with warm water.
C Use a damp cloth wrung out in a solution
of one teaspoon of bicarbonate of soda to
one pint of water to clean the interior and
wipe it dry.
BMake sure that no water enters the lamp
housing and other electrical items.
BIf your cooler/freezer is not going to be
used for a long period of time, unplug the
power cable, remove all food, clean it and
leave the door ajar.
C Check door seals regularly to ensure they
are clean and free from food particles.
ATo remove door racks, remove all the
contents and then simply push the door
rack upwards from the base.
23
EN
7 Troubleshooting
Please review this list before calling the service. It will save your time and money. This list
includes frequent complaints that are not arising from defective workmanship or material
usage. Some of the features described here may not exist in your product.
The cooler/freezer does not operate.
• The plug is not inserted into the socket correctly. >>>Insert the plug into the socket
securely.
• The fuse of the socket which your cooler/freezer is connected to or the main fuse have
blown out. >>>Check the fuse.
Condensation on the side wall of the fridge compartment (MULTIZONE, COOL
CONTROL and FLEXI ZONE).
• Ambient is very cold. >>>Do not install the cooler/freezer in places where the temperature
falls below 10 °C.
• Door has been opened frequently. >>>Do not open and close the door of cooler/freezer
frequently.
• Ambient is very humid. >>>Do not install your cooler/freezer into highly humid places.
• Food containing liquid is stored in open containers. >>>Do not store food with liquid
content in open containers.
• Door of the cooler/freezer is left ajar. >>>Close the door of the cooler/freezer.
• Thermostat is set to a very cold level. >>>Set the thermostat to a suitable level.
• Compressor is not running
• Protective thermic of the compressor will blow out during sudden power failures or plugout plug-ins as the refrigerant pressure in the cooling system of the cooler/freezer has not
been balanced yet. The cooler/freezer will start running approximately after 6 minutes.
Please call the service if the cooler/freezer does not startup at the end of this period.
• The fridge is in defrost cycle. >>>This is normal for a full-automatically defrosting cooler/
freezer. Defrosting cycle occurs periodically.
• The cooler/freezer is not plugged into the socket. >>>Make sure that the plug is fit into the
socket.
• Temperature settings are not made correctly. >>>Select the suitable temperature value.
• There is a power outage. >>>Cooler/freezer returns to normal operation when the power
restores.
The operation noise increases when the cooler/freezer is running.
• The operating performance of the cooler/freezer may change due to the changes in the
ambient temperature. It is normal and not a fault.
The cooler/freezer is running frequently or for a long time.
24
EN
• New product may be wider than the previous one. Larger cooler/freezers operate for a
longer period of time.
• The room temperature may be high. >>>It is normal that the product operates for longer
periods in hot ambient.
• The cooler/freezer might be plugged in recently or might be loaded with food. >>>When
the cooler/freezer is plugged in or loaded with food recently, it will take longer for it to attain
the set temperature. This is normal.
• Large amounts of hot food might be put in the cooler/freezer recently. >>>Do not put hot
food into the cooler/freezer.
• Doors might be opened frequently or left ajar for a long time. >>>The warm air that has
entered into the cooler/freezer causes the cooler/freezer to run for longer periods. Do not
open the doors frequently.
• Freezer or fridge compartment door might be left ajar. >>>Check if the doors are closed
completely.
• The cooler/freezer is adjusted to a very low temperature. >>>Adjust the cooler/freezer
temperature to a warmer degree and wait until the temperature is achieved.
• Door seal of the fridge or freezer may be soiled, worn out, broken or not properly seated.
>>>Clean or replace the seal. Damaged/broken seal causes the cooler/freezer to run for a
longer period of time in order to maintain the current temperature.
Freezer temperature is very low while the fridge temperature is sufficient.
• The freezer temperature is adjusted to a very low value. >>>Adjust the freezer temperature
to a warmer degree and check.
Fridge temperature is very low while the freezer temperature is sufficient.
• The fridge temperature is adjusted to a very low value. >>>Adjust the fridge temperature to
a warmer degree and check.
Food kept in the fridge compartment drawers is frozen.
• The fridge temperature is adjusted to a very high value. >>>Adjust the fridge temperature
to a lower value and check.
Temperature in the fridge or freezer is very high.
25
EN
• The fridge temperature is adjusted to a very high value. >>>Fridge compartment
temperature setting has an effect on the temperature of the freezer. Change the
temperatures of the fridge or freezer and wait until the relevant compartments attain a
sufficient temperature.
• Doors are opened frequently or left ajar for a long time. >>>Do not open the doors
frequently.
• Door is ajar. >>>Close the door completely.
• The cooler/freezer is plugged in or loaded with food recently. >>>This is normal. When the
cooler/freezer is plugged in or loaded with food recently, it will take longer for it to attain the
set temperature.
• Large amounts of hot food might be put in the cooler/freezer recently. >>>Do not put hot
food into the cooler/freezer.
• Vibrations or noise.
• The floor is not level or stable. >>> If the cooler/freezer rocks when moved slowly, balance
it by adjusting its feet. Also make sure that the floor is strong enough to carry the cooler/
freezer, and level.
• The items put onto the cooler/freezer may cause noise. >>>Remove the items on top of
the cooler/freezer.
There are noises coming from the cooler/freezer like liquid flowing, spraying, etc.
• Liquid and gas flows occur in accordance with the operating principles of your cooler/
freezer. It is normal and not a fault.
Whistle comes from the cooler/freezer.
• Fans are used in order to cool the cooler/freezer. It is normal and not a fault.
Condensation on the inner walls of cooler/freezer.
• Hot and humid weather increases icing and condensation. It is normal and not a fault.
• Doors are opened frequently or left ajar for a long time. >>>Do not open the doors
frequently. Close them if they are open.
• Door is ajar. >>>Close the door completely.
Humidity occurs on the outside of the cooler/freezer or between the doors.
• There might be humidity in the air; this is quite normal in humid weather. When the humidity
is less, condensation will disappear.
Bad odour inside the cooler/freezer.
• No regular cleaning is performed. >>>Clean the inside of the cooler/freezer regularly with a
sponge, lukewarm water or carbonate dissolved in water.
• Some containers or package materials may cause the smell. >>>Use a different container
or different brand packaging material.
• Food is put into the cooler/freezer in uncovered containers. >>>Keep the food in closed
containers. Microorganisms spreading out from uncovered containers can cause
unpleasant odours.
• Remove the foods that have expired best before dates and spoiled from the cooler/freezer.
26
EN
The door is not closing.
• Food packages are preventing the door from closing. >>>Replace the packages that are
obstructing the door.
• The cooler/freezer is not completely even on the floor. >>>Adjust the feet to balance the
cooler/freezer.
• The floor is not level or strong. >>>Make sure that the floor is level and capable to carry the
cooler/freezer.
Crispers are stuck.
• The food is touching the ceiling of the drawer. >>>Rearrange food in the drawer.
27
EN
GUARANTEE DETAILS
Your new Beko product is guaranteed against the cost of breakdown repair for
one year from the date of the original purchase.
What is covered?
• Repairs necessary as a result of faulty materials, defective components or
manufacturing defect.
• The cost of functional replacement parts, but excluding consumable items.
• The labour costs of a Beko approved repairer to carry out the repair.
What is not covered?
• Transit, delivery or accidental damage or misuse and abuse.
• Cabinet or appearance parts, including control knobs, flaps, handles or container
lids.
• Accessories or consumable items including but not limited to, ice trays,
scrapers, cutlery baskets, filters and light bulbs.
• Repairs required as a result of unauthorised repair or inexpert installation that
fails to meet the requirements contained in the user instruction book.
• Repairs to products used on commercial or non-residential household
premises.
• Loss of frozen food in freezers or fridge/freezers. (Food loss insurance is
often included within your household contents insurance policy, or may be
available separately from your retailer).
Important notes.
• Your Beko product is designed and built for domestic household use only.
• The guarantee will be void if the product is installed or used in commercial
or non-residential domestic household premises.
• The product must be correctly installed, located and operated in accordance
with the instructions contained in the User Instructions Booklet provided.
• Professional installation by a qualified Electrical Domestic Appliance Installer
is recommended for all Washing Machines, Dishwashers and Electric Cookers
• Gas Cookers must only be installed by a Gas Safe (or BORD GAIS) registered
Gas Installer.
• The guarantee is given only within the boundaries of the United Kingdom
and the Republic of Ireland.
• The guarantee is applicable only to new products and is not transferable if
the product is resold.
• Beko disclaims any liability for incidental or consequential damages.
The guarantee does not in anyway diminish your statutory or legal rights.
28
EN
HOW TO OBTAIN SERVICE
Please keep your purchase receipt or other proof of purchase in a safe
place; you will need to have it should the product require attention under
guarantee.
You should also complete the details below; it will help us assist you when
requesting service. (The model number is printed on the Instruction Booklet and
the serial number is printed on the Rating Label affixed to the appliance)
Model No:
Serial No:
Retailer:
Date of purchase:
For service under guarantee simply telephone the appropriate number
below
UK Mainland & Northern Ireland
Fridges & Freezers
Electric Cookers
Gas & Dual Fuel Cookers
Washing Machines
& Dishwashers
0845 6004903
0845 6004902
0845 6004905
0845 6004906
Republic of Ireland
All Refrigeration, All Cookers
Washing Machines & Dishwashers
01 862 3411
Before requesting service please check the trouble-shooting guide in
the Operating Instructions as a charge may be levied where no fault is
found even though your product may still be under guarantee.
Service once the manufacturers guarantee has expired.
If you have purchased an extended guarantee please refer to the instructions
contained within the extended guarantee agreement document. Otherwise
please call the appropriate number above where service can be obtained at a
charge.
Should you experience any difficulty in obtaining service please contact the Beko
Customer Help-Line.
Tel: 0845 6004911 e-mail: service@beko.co.uk
29
EN
BEKO plc
Beko House
1 Greenhill Crescent
Watford
Hertfordshire
WD18 8QU
Tel: 0845 6004911
Fax: 0845 6004922
e-mail: service@beko.co.uk
website: www.beko.co.uk
Printed in Turkey
Part no: 57 3921 0000
Revision no: AB
Download PDF