Stainless Steel SMA Connectors

Stainless Steel SMA Connectors
Connectivity....for
Business-Critical Continuity
Stainless Steel SMA Connectors
Product Catalog
Connectivity....for
Business-Critical Continuity
Stainless Steel SMA Connectors
Johnson® Stainless Steel SMA Connectors meet or exceed the performance requirements of
MIL-PRF-39012. All designs are based on 50 ohm system impedance per MIL-STD-348, and operate
at frequencies up to 26.5 GHz.
Applications
• Antennas
• Base stations
• Broadcast
• Cable assemblies
• Cellular
• Instrumentation
• Microwave Radio
• Radar
• Radios
• RF and Microwave Components
• Satcom
• Aircraft
Features
• All contacts are plated with 50 micro-inches of gold for excellent durability and high frequency
performance
• Stainless steel bodies are offered with passivation as a standard finish, and gold plating where
soldering is required
• Plug interfaces and semi-rigid bulkhead jack bodies include gaskets for environmental sealing
• Cabled contacts are captivated upon assembly
• Flexible cable contacts can be crimped or soldered
• Semi-rigid cabled plug connectors are available in one piece versions, requiring solder
attachment only between the cable jacket and connector body
• The right angle PC mount features a rugged one-piece body with a one-piece swept contact
Table of Contents
PAGE
ASSEMBLY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . .14
ASSEMBLY TOOLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
COMPETITOR CROSS REFERENCE . . . . . . . . . . . . . . . . . . .19
ELECTRICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . .3-4
ENVIRONMENTAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . .5
FLEXIBLE CABLE CONNECTORS . . . . . . . . . . . . . . . . . . . . . .9
MATERIAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . .5
MECHANICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . .5
MOUNTING HOLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
PANEL MOUNT JACK RECEPTACLES . . . . . . . . . . . . . .10-12
PC MOUNT JACKS RECEPTACLES . . . . . . . . . . . . . . . . . . . .10
SEMI-RIGID CABLE CONNECTORS . . . . . . . . . . . . . . . . . . . .7
2
Connectivity....for
Business-Critical Continuity
Stainless Steel SMA Connectors
ELECTRICAL SPECIFICATIONS
Impedance: 50 Ohms
Frequency Range:
Flexible cable connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-12.4 GHz
Uncabled receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-18.0 GHz
Straight Semi-Rigid cable connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-26.5 GHz
VSWR: (f = GHz)
Straight
Cable Connectors
RG-316, LMR-100 cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RG-58, LMR-195 cable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RG-142 cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.086 Semi-Rigid cable (0 - 18 GHz). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.086 Semi-Rigid cable (18 - 26.5 GHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.141 Semi-Rigid cable (w/contact) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.141 Semi-Rigid cable (w/o contact) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.15+.02f
1.15+.01f
1.15+.01f
1.07+.008f
1.35 MAX
1.05+.008f
1.035+.005f
Right Angle
Cable Connectors
1.15+.03f
1.15+.02f
1.15+.02f
Insertion Loss: (dB maximum)
Straight flexible cable connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.06 f (GHz), tested at 6 GHz
Right angle flexible cable connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.15 f (GHz), tested at 6 GHz
Straight Semi-Rigid cable connectors with contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.03 f (GHz), tested at 10 GHz
Straight Semi-Rigid cable connectors w/o contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.03 f (GHz), tested at 16 GHz
Uncabled receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
Working Voltage: (Vrms maximum)
Sea Level
RG-316, LMR-100, 195 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
RG-58, RG-142, .086 Semi-Rigid,
Uncabled receptacles, .141 Semi-Rigid w/o contact. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 335
.141 Semi-Rigid with contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500
70K Feet
65
85
125
Dielectric Withstanding Voltage: (Vrms minimum at sea level)
Sea Level
Connectors for RG-316, LMR-100, 195 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750
Connectors for RG-58, RG-142, .086 Semi-Rigid,
Uncabled receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000
Connectors for .141 Semi-Rigid with contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500
Connectors for .141 Semi-Rigid w/o contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
Corona Level: (Volts minimum at 70,000 feet)
70K Feet
Connectors for RG-316, LMR-100, 195 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Connectors for RG-58, RG-142, .086 Semi-Rigid,
Uncabled receptacles, .141 Semi-Rigid w/o contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250
Connectors for .141 Semi-Rigid with contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 375
3
Stainless Steel SMA Connectors
Connectivity....for
Business-Critical Continuity
ELECTRICAL SPECIFICATIONS cont’d
RF High Potential Withstanding Voltage: (Vrms minimum, tested at 4 and 7 MHz)
Connectors for RG-316, LMR-100, 195 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500
Connectors for RG-58, RG-142, .086 Semi-Rigid,
.141 Semi-Rigid cable w/o contact, Uncabled receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 670
Connectors for .141 Semi-Rigid with contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000
Insulation Resistance: 5000 Megohms minimum
Contact Resistance: (milliohms maximum)
Initial
Center contact (straight cabled connectors
and Uncabled receptacles) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0*
Center contact (right angle cabled
connectors) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.0
Outer Contact (all connectors) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0
Braid to Body (gold plated bodies) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5
*N/A where the cable center conductor is used as a contact
After Environmental
4.0*
6.0
N/A
N/A
RF Leakage: (dB minimum, tested at 2.5 GHz)
Flexible cable connectors and .141 Semi-Rigid
connectors w/o contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -60
.086 Semi-Rigid connectors and .141 Semi-Rigid connectors
with contact . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -90
Uncabled receptacles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . N/A
4
Connectivity....for
Business-Critical Continuity
Stainless Steel SMA Connectors
MECHANICAL SPECIFICATIONS
Engagement Design: MIL-PRF-39012, Series SMA
Durability: 500 cycles minimum
100 cycles minimum for .141 Semi-Rigid connectors w/o contact
Engagement/Disengagement Force: 2 inch-pounds maximum
Mating Torque: 7 to 10 inch-pounds
Bulkhead Mounting Nut Torque: 15 inch-pounds recommended
Coupling Proof Torque: 15 inch-pounds minimum
Coupling Nut Retention: 60-pounds minimum
Contact Retention:
6 lbs. minimum axial force (captivated contacts)
4 inch-ounce minimum torque (uncabled receptacles)
Cable Retention: (minimum*)
Axial Force (lbs) Torque (in-oz)
Connectors for RG-316, LMR-100 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
N/A
Connectors for RG-58 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
N/A
Connectors for RG-142 Cabled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
N/A
Connectors for .086 Semi-Rigid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
16
Connectors for .141 Semi-rigid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
55
Connectors for LMR-195 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
N/A
* Or cable breaking strength, whichever is less
ENVIRONMENTAL SPECIFICATIONS
(Meets or Exceeds the Applicable Paragraph of MIL-PRF-39012)
Temperature Range: -65°C to +165°C
Thermal Shock: MIL-STD-202, Method 107, Condition B (except +85°C high temperature)
Corrosion: MIL-STD-202, Method 101, Condition B
Shock: MIL-STD-202, Method 213, Condition I
Vibration: MIL-STD-202, Method 204, Condition D
Moisture Resistance: MIL-STD-202, Method 106
MATERIAL SPECIFICATIONS
Bodies:
Stainless Steel, type 303, per ASTM A 582, passivated per MIL-F-14072 (EL 300), or gold Plated
per MIL-G-45204 B .00003” min.
Contacts: Male - Brass per ASTM B16, Gold plated* per MIL-G-45204 (.00005” min)
Female – Beryllium Copper per ASTM B196, Gold plated* per MIL-G-45204 (.00005” min)
Insulators: PTFE Fluorocarbon per ASTM D1710 and ASTM D1457
Gaskets:
Silicon Rubber per ZZ-R-765
Expansion Caps: Brass per QQ-B-613, gold plated per MIL-G-45204 .00001” min. or nickel plated per QQ-N-290
Crimp Sleeves: Copper per ASTM A75, gold plated per MIL-G-45204 .0001”min. or nickel per QQ-N-290 plated (.00001” min)
Nut Retention Spring (Plugs): Beryllium Copper per ASTM B196, un-plated
Mounting Hardware: Stainless Steel, type 303, Per ASTM A 582, passivated per MIL-F-14072 (EL 300), or gold plated* per
MIL-G-45204 B .00001” min.
Note: All Gold plated parts include a .00005” minimum Nickel under plated barrier layer
5
Connectivity....for
Business-Critical Continuity
Stainless Steel SMA Connectors
MATING ENGAGEMENT FOR STAINLESS STEEL SMA SERIES PER MIL-STD-348A
MOUNTING HOLES
Fig 1
6
Fig 2
Inches (Millimeter)
Connectivity....for
Business-Critical Continuity
Stainless Steel SMA Connectors
Straight Solder Type Plug - with Contact, Captive Nut Thin Wall
Cable Tpe
VSWR & Freq. Range
Gold Plated Body
“A”
RG-405, .086 Semi-Rigid
RG-402, .141 Semi-Rigid
1.07+.008f (0-18 GHz), 1.35 Max (18-26.5 GHz)
1.05+.008f (0-26.5 GHz)
141-0693-002
141-0694-002
.440
.405
Assembly instructions page 16
Straight Solder Type Plug - without Contact, Thread-on Nut
Connector Interface for .141 Cable
Cable Type
VSWR & Freq. Range
Gold Plated Body
RG-402, .141 Semi-Rigid
1.035+.005f (0-26.5 GHz)
141-0694-012
Assembly instructions page 15
Straight Solder Type Plug with Captivated Solderless
Contact, Captive Nut and Thick Wall Interface
Cable Type
VSWR & Freq. Range
Gold Plated Body
RG-405, .086 Semi-Rigid
RG-402, .141 Semi-Rigid
1.07+.008f (0-18 GHz), 1.35 Max (18-26.5 GHz)
1.05+.008f (0-26.5 GHz)
141-0693-062
141-0694-062
Assembly instructions page 17
Inches (Millimeter)
7
Stainless Steel SMA Connectors
Connectivity....for
Business-Critical Continuity
Straight Solder Type Jack
Cable Type
VSWR & Freq. Range
Gold Plated
RG-405, .086 Semi-Rigid
RG-402, .141 Semi-Rigid
1.07+.008f (0-18 GHz), 1.35 Max (18-26.5 GHz)
1.05+.008f (0-26.5 GHz)
141-0593-001
141-0594-001
Assembly instructions page 16
Straight Solder Type Bulkhead Jack with O-Ring
Cable Type
VSWR & Freq. Range
Gold Plated
RG-405, .086 Semi-Rigid
RG-402, .141 Semi-Rigid
1.07+.008f (0-18 GHz), 1.35 Max (18-26.5 GHz)
1.05+.008f (0-26.5 GHz)
141-0593-401
141-0594-401
Assembly instructions page 16
Straight Solder Type Bulkhead Jack with Captivated
Solderless Contact and O-Ring
Cable type
VSWR & Freq. Range
Gold Plated
RG-405, .086 Semi-Rigid
RG-402, .141 Semi-Rigid
1.07+.008f (0-18 GHz), 1.35 Max (18-26.5 GHz)
1.05+.008f (0-26.5 GHz)
141-0593-421
141-0594-421
Assembly instructions page 17
8
Inches (Millimeter)
Connectivity....for
Business-Critical Continuity
Stainless Steel SMA Connectors
Straight Crimp Type Plug (3-piece) - Solder or Crimp Captivated Contact
Cable Type
VSWR & Freq. Range
Passivated
RG-161/U, 174,188, 316, LMR-100, HPF-100, RF-100
RG-188 DS, RG-316 DS
RG-58/U, 141, 303, LMR-195, HPF-195, RF-195
RG-55/U, 142, 223, 400
1.15+.02f (0-12.4 GHz)
1.15+.02f (0-12.4 GHz)
1.15+.01f (0-12.4 GHz)
1.15+.01f (0-12.4 GHz)
141-0403-012
141-0404-012
141-0407-012
141-0408-012
Assembly instructions page 14
Right Angle Crimp Type Plug - Captivated Contact
Cable Type
VSWR & Freq. Range
Passivated
“A”
“B”
“C”
“D”
RG-161/U, 174,188, 316
RG-188 DS, RG-316 DS
RG-58/U, 141, 303
RG-55/U, 142, 223, 400
1.15+.03f (0-12.4 GHz)
1.15+.03f (0-12.4 GHz)
1.15+.02f (0-12.4 GHz)
1.15+.02f (0-12.4 GHz)
141-0403-102
141-0404-112
141-0407-102
141-0408-102
.652
.652
.636
.636
.527
.527
.519
.519
.593
.593
.596
.596
.467
.467
.471
.471
Assembly instructions page 18
Straight Crimp Type Bulkhead Jack (3-piece) Solder or Crimp Captivated Contact
Cable Type
VSWR & Freq. Range
Passivated
RG-161/U, 174,188, 316
RG-188 DS, RG-316 DS
RG-58/U, 141, 303
RG-55/U, 142, 223, 400
1.15+.02f (0-12.4 GHz)
1.15+.02f (0-12.4 GHz)
1.15+.01f (0-12.4 GHz)
1.15+.01f (0-12.4 GHz)
141-0303-412
141-0304-412
141-0307-412
141-0308-412
Assembly instructions page 14
Inches (Millimeter)
9
Stainless Steel SMA Connectors
Connectivity....for
Business-Critical Continuity
Right Angle PC Mount Jack Receptacle
Freq. Range
Gold Plated
0-18 GHz
141-0701-301
Mounting hole layout Figure 2 on page 6
Straight PC Mount Jack Receptacle
Freq. Range
Gold Plated
0-18 GHz
141-0701-201
Mounting hole layout Figure 2 on page 6
Rear Mount Bulkhead Jack Receptacle
Freq. Range
Passivated
0-18 GHz
141-0701-402
Mounting hole layout Figure 1 on page 6
10
Inches (Millimeter)
Connectivity....for
Business-Critical Continuity
Stainless Steel SMA Connectors
2-Hole Flange Mount Jack Receptacle - Flush Dielectric
Freq. Range
Passivated
0-18 GHz
141-0701-602
4-Hole Flange Mount Jack Receptacle - Flush Dielectric
Freq. Range
Passivated
0-18 GHz
141-0701-612
Inches (Millimeter)
11
Stainless Steel SMA Connectors
Connectivity....for
Business-Critical Continuity
2-Hole Flange Mount Jack Receptacle - Extended Dielectric
VSWR & Freq. Range
Passivated
1.15+.02f (0-18 GHz)
141-0701-622
4-Hole Flange Mount Jack Receptacle - Extended Dielectric
VSWR & Freq. Range
Passivated
1.15+.02f (0-18 GHz)
141-0701-632
12
Inches (Millimeter)
Connectivity....for
Business-Critical Continuity
Stainless Steel SMA Connectors
ASSEMBLY TOOLS
Semi-Rigid Assembly Tools
Accurate assembly of the Semi-Rigid Cabled Connectors is obtained with the tools listed below. Industry standard
devices are used if possible for customer convenience and tool compatibility.
B.
A.
D.
I.
C.
E.
G.
F.
H.
Item
Part No.
Description
A
B
140-0000-962
140-0000-964
140-0000-965
140-0000-973
140-0000-975
140-0000-976
140-0000-977
140-0000-978
140-0000-979
140-0000-980
140-0000-981
140-0000-982
Soldering Vise (does not include inserts (B) or stop screw (H) )
Semi-Rigid Cable Clamp Inserts for .086" OD Cable
Semi-Rigid Cable Clamp Inserts for .141" OD Cable
Soldering Mating Fixture for SMA Jack Connectors
Complete Center Conductor Pointing Tool for .086" OD Cable
Complete Center Conductor Pointing Tool for .141" OD Cable
Bushing for .086" OD Cable Conductor Pointing Tool
Bushing for .141" OD Cable Conductor Pointing Tool
Blade for Center Conductor Pointing Tool
Frame for Center Conductor Pointing Tool
Stop Screw for Semi-Rigid Cable Soldering Vise
Soldering Mating Fixture for SMA Plug Connectors
C
D
E
F
G
H
I
Inches (Millimeter)
13
Stainless Steel SMA Connectors
Connectivity....for
Business-Critical Continuity
ASSEMBLY INSTRUCTIONS
SMA Type Straight Plugs, Straight Jacks, and
Straight Bulkhead Jacks for Flexible Cable Crimp or Solder Contacts
1. Identify connector parts. (3 piece parts–except
bulkhead)
2. Strip cable to dimensions shown. Do not nick braid or
center conductor. Tin center conductor if contact will
be solder attached. Do not tin center conductor if
contact is to be crimp attached. When stripping LMR100 low loss cable, remove foil back to where cable
jacket is stripped. A wire stripper of correct size is
recommended for this step. Slide heat shrink (as
applicable) and crimp sleeve onto jacket of cable.
3. Assemble contact onto cable as shown.
Solder Attachment: Solder contact to center
conductor through solder hole using .020 (0.51)
diameter solder. Use a minimum amount of solder for a
good joint.
Crimp Attachment: Crimp contact to center
conductor using Johnson® Hand Tool 144-0000-910,
setting #2, with positioner 141-0000-907. Crimp
location should be centered between end of contact
and X-hole. Crimp attachment to solid center
conductor cables is not recommended.
4. Flare braid and slide body assembly over contact and
under braid. Then seat body assembly firmly onto
contact. The cable may have to be held in a clamping
fixture. Arrange braid uniformly around crimp stem.
Slide crimp sleeve forward and crimp using
recommended crimp tool. Slide heat shrink forward
and shrink (as applicable).
Cable Type
Part No.
Crimp Hex
RG-316/U, 161, 174, 188; LMR-100
RG-316 DS, 188 DS
RG-58/U, 141, 303
RG-55/U, 142, 223, 400
RG-316/U, 161, 174, 188; LMR-100
RG-316 DS, 188 DS
RG-58/U, 141, 303
RG-55/U, 142, 223, 400
141-0303-412
141-0304-412
141-0307-412
141-0308-412
141-0403-012
141-0404-012
141-0407-012
141-0408-012
.128 (3.25)
.151 (3.83)
.213 (5.41)
.213 (5.41)
.128 (3.25)
.151 (3.83)
.213 (5.41)
.213 (5.41)
14
Inches (Millimeter)
Connectivity....for
Business-Critical Continuity
Stainless Steel SMA Connectors
SMA Solder Type Straight Plugs for
Semi-Rigid Cable
1. Identify connector parts. (2 piece parts)
2. Strip cable to dimensions shown. Do not nick center
conductor. Bevel the cable center conductor per contact
detail of SMA interface on page 6. Slide coupling nut onto
cable as shown.
3. Insert cable into body making sure cable jacket is flush with
front of body. Solder body to cable. Use a minimum amount
of heat to minimize cable insulation movement. Trim
expanded insulation flush with front of body or fixture body
and cable during soldering to prevent cable insulation
expansion.
4. Thread coupling nut over body.
Cable Type
Part No.
RG-402/U (.141 Semi-Rigid)
141-0694-012
Inches (Millimeter)
15
Stainless Steel SMA Connectors
Connectivity....for
Business-Critical Continuity
SMA Solder Type Straight Jacks,
Straight Plugs, and Straight Bulkhead Jacks
for Semi-Rigid Cable
1. Identify connector parts. (2 piece parts)
2. Strip cable to dimensions shown. Do not nick center
conductor.
3. Place center contact on center conductor making sure
contact bottoms against cable insulation. Solder center
conductor to center contact through solder hole. Solder
must not be allowed to run on outside of contact. Use a
minimum amount of solder for a good joint. .020 (0.51)
diameter solder is recommended. Trim excess
insulation.
4. Insert contact and cable into body assembly making sure
cable is bottomed against insulator in body. Solder body to
cable. Use a minimum amount of heat to minimize cable
insulation movement.
Cable Type
Part No.
“A”
RG-405/U (.086 Semi-Rigid)
141-0593-001
141-0593-401
141-0693-002
141-0594-001
141-0594-401
141-0694-002
.070 (1.78)
.070 (1.78)
.070 (1.78)
.085 (2.16)
.085 (2.16)
.085 (2.16)
RG-402/U (.141 Semi-Rigid)
16
Inches (Millimeter)
Connectivity....for
Business-Critical Continuity
Stainless Steel SMA Connectors
SMA Straight Solder Type for Semi-Rigid Cable
1. Identify the connector (plug or jack) and tools
2. Strip the cable jacket and dielectric to dimension shown.
Do not nick the center conductor.
3. Bevel the entire diameter on the end of the cable center
conductor until the point resembles the appropriate
dimensional profile. This operation can be accomplished
effectively by using the recommended center conductor
pointing tool as described in step 4.
4. Insert the stripped cable into the bushing of the
appropriate pointing tool until the center conductor just
touches the blade. While maintaining light pressure on
the center conductor against the blade, turn the tool in a
counter-clockwise fashion as viewed from the bushing end
of the tool. Continue cutting the center conductor point
until the cable jacket bottoms out inside the bushing.
5. Attach the appropriate soldering mating fixture to the
connector and tighten to a maximum of 8 inch pounds of
torque.
6. Clean all debris from the prepared cable and insert the
cable into the connector, making sure that the cable jacket
bottoms out against the internal shoulder of the
connector body.
7. Insert the stop screw into the mating fixture. Clamp the
cable and fixtured connector assembly securely in the
soldering vise. Solder the connector body to the cable as
shown, while insuring the cable dielectric expansion does
not move the assembly. Allow the assembly to cool before
removing the connector from the fixture
Cable Type
Part No.
RG-405/U (.086 Semi-Rigid)
141-0593-421
141-0693-062
141-0594-421
141-0694-062
RG-402/U (.141 Semi-Rigid)
Inches (Millimeter)
17
Stainless Steel SMA Connectors
Connectivity....for
Business-Critical Continuity
SMA Crimp Type Right Angle Plugs
for Flexible Cable
1. Identify connector parts. (3 piece parts)
2. Strip cable to dimensions shown. Do not nick braid or
center conductor. When stripping LMR-100 low loss cable,
remove foil back to where cable jacket is stripped. A wire
stripper of correct size is recommended for this step.
Twist stranded center conductor into tight bundle and tin
(optional). Slide crimp sleeve onto cable as shown.
3. Flare braid and slide cable into body making certain that
the cable insulation bottoms on center contact. Solder
center conductor to contact through the rear access port.
Use a minimum amount of solder for a full fillet joint. .020
(0.51) diameter solder is recommended.
4. Arrange braid uniformly around crimp stem. Slide crimp
sleeve over braid and crimp securely using recommended
crimp tool. Place expansion cap in access port and seat
with .187 (4.75) diameter flat punch. Shrink heat shrink
tubing over crimp sleeve if applicable.
Cable Type
Part No.
Crimp Hex
RG-316/U, 161, 174, 188; LMR-100
RG-316 DS, 188 DS
RG-58/U, 141, 303
RG-55/U, 142, 223, 400
141-0403-102
141-0404-112
141-0407-102
141-0408-102
.128 (3.25)
.151 (3.83)
.213 (5.41)
.213 (5.41)
18
Inches (Millimeter)
Connectivity....for
Business-Critical Continuity
Stainless Steel SMA Connectors
COMPETITOR CROSS REFERENCE
JOHNSON
141-0403-012
141-0404-012
141-0407-012
141-0408-012
141-0403-102
141-0404-102
141-0407-102
141-0408-102
141-0693-002
141-0694-002
141-0694-012
141-0693-062
141-0694-062
141-0303-412
141-0304-412
141-0307-412
141-0308-412
141-0593-001
141-0594-001
141-0593-401
141-0594-401
141-0593-421
141-0594-421
141-0701-201
141-0701-301
141-0701-402
141-0701-602
141-0701-612
141-0701-622
141-0701-602
Inches (Millimeter)
HUBER SUHNER
11SMA-50-2-55C
11SMA-50-2-56C
11SMA-50-3-55C
11SMA-50-3-56C
16SMA-50-2-55C
16SMA-50-2-56C
16SMA-50-3-55C
16SMA-50-3-56C
11SMA-50-2-65
11SMA-50-3-65
11SMA-50-3-64
11SMA-50-2-65
11SMA-50-3-65
AMP/TYCO
225532-4
225532-1
225532-3
225609-4
225609-1
225609-3
225608-4
1-225608-1
225608-3
24SMA-50-2-41
24SMA-50-3-41
24SMA-50-2-41
24SMA-50-3-41
82SMA-50-0-1
85SMA-50-0-1
22SMA-50-0-54
23SMA-50-0-61
23SMA-50-0-51
23SMA-50-0-63
23SMA-50-0-53
221789-1
221790-1
228496-1
221641-1
221640-1
RADIAL
R125072001
R125072081
R125075001
R125076001
R125172001
R125174011
R125175001
R125176001
R125052002
AMPHENOL
901-9511-3SFC
901-9511-12SFC
901-9511-2SF
901-9511-1SF
901-9531-3SF
901-9531-12SF
901-9531-2SF
901-9531-1
901-9201-2A
R125054002
R125052002
R125057002
R125312121
R125313121
R125314121
R125315121
R125222000
R125225000
R125326000
R125325000
R125326000
R125325000
R125426000
R125680000
R125553001
R125454001
R125403001
R125464274
R125415275
901-9201-1A
901-9723
901-9808
901-9610-3SF
901-9610-12SF
901-9610-2SF
901-9610-1SF
901-9202-2A
901-9202-1A
901-144
901-143
901-9211-SF
901-9215-SF
901-9000-CCSF
901-9204-CCSF
AEP
9101-9573-03
9101-9573-19
9101-9573-06
9101-9573-01
9043-9523-03
9043-9523-19
9043-9523-06
9043-9523-01
9401-1083-010
9401-1083-109
9301-1063-009
9401-1583-010
9401-1583-109
9130-9573-03
9130-9573-19
9130-9573-06
9130-9573-01
9402-1533-010
9402-1583-009
9453-1083-010
9453-1083-009
9453-1583-010
9453-1083-009
9650-1113-000
9647-1513-000
9412-9113-000
9408-9113-000
9404-9113-000
9008-9113-000
9004-9113-000
19
Emerson Network Power Connectivity Solutions
About Emerson Network Power
Connectivity Solutions
Johnson
299 Johnson Avenue
Waseca, MN 56093
Emerson Network Power Connectivity Solutions,
an Emerson business, serves the needs of
USA
wireless communications, telephony and data
networks, CATV, security systems, health care
Tel: 800.247.8256
and industrial facilities with a full spectrum of
Fax: 507.833.6287
broadband copper and fiber optic connectivity
products. For more information, visit
www.EmersonNetworkPower.com/Connectivity
www.EmersonNetworkPower.com/Connectivity.
About Emerson
Emerson (NYSE: EMR), based in St. Louis, is a
global leader in bringing technology and
engineering together to provide innovative
solutions to customers through its network
power, process management, industrial
automation, climate technologies, and appliance
and tools businesses. Sales in fiscal 2005 were
$17.3 billion. For more information, visit
www.gotoemerson.com.
Emerson Network Power.
The global leader in enabling business-critical continuity.
AC Power Systems
Connectivity
DC Power Systems
Embedded Power
Inbound Power
Integrated Cabinet Solutions
www.EmersonNetworkPower. com
Outside Plant
Precision Cooling
Site Monitoring and Services
Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2006 Emerson Electric Co JC0606-SS
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement