www.mgeups.com
MGE UPS SYSTEMS
Pulsar EX
RT
700/1000/1500/2200/3200 VA
True ON-LINE double-conversion technology
in a versatile form factor to deliver pure digital
quality power protection for the networked
computing infrastructure
Digital Quality Technology
◗ True ON-LINE double-conversion
technology, required for all mission
critical networked applications and
server environments
◗ Continuous voltage & frequency
regulation – Always On, Always Available
◗ Complete compatibility with generators
and fuel cell technologies
High Availability
◗ High input voltage tolerance provides
a wide protection coverage window,
saving battery protection for major
power problems
◗ Automatic by-pass system in
case of overload or default
◗ Hot-swappable batteries
◗ Complete network integration
software and communication
connectivity
Mission Critical Applications for:
◗ Web/Email servers and
Applications servers
◗ Network equipment (Hubs, Switches, Routers)
◗ Convergence IP-based technology
(VoIP, VPN, Firewall)
◗ Storage environments (NAS/SAN),
Mainframe/Distributed
◗ Telecom equipment
◗ Vital Health/Medical equipment
◗ Sensitive electronic equipment
in industrial environments
T H E
U N I N T E R R U P T I B L E
P O W E R
P R O V I D E R
EX RT~ Digital Quality Power Technology
0The MGE Pulsar EX RT family was designed
with the same on-line double-conversion
technology that protects over 95% of the
Fortune 100 companies. MGE has been at
the foundation of your facilities and
datacenters protection. Now MGE offers
the core networked computing environment
the same technology in a high-density, footprint
optimized UPS for critical business applications
in sensitive computing environments.
True On-line
Double-Conversion Technology
This technology guarantees a consistently high
level of power quality. Whatever the disturbances
on the distribution system, the waveform is
regenerated by the UPS to produce a noise-free
sine wave output. This pure digital quality power
protection technology is always on and always
providing the best-of-breed Quality-of-Service
(QoS) required by sensitive equipment. This
on-line UPS stands between the critical load and
the utility at all times regulating power, while
other UPSs may only supply battery power
in the event of a power failure.
High-Performance Battery Charger
The Pulsar EX RT battery charger:
◗ Reduces battery recharge time (90% backup
time recovered in less than 3 hours) and
maximizes battery life
◗ Increases the service life of the battery by
taking into account manufacturer parameters,
ambient temperature and battery aging
◗ Protects the battery against damage caused
by deep discharge
Advance Planning for the recovery of servers
and networks, and the importance of safeguarding data assets required for business continuity is
dependent upon the on-line double-conversion
UPS topology offered by the Pulsar EX RT.
The Digital Quality Power of an on-line
system protects the load from transients that
may be generated by the power switching
process itself.
High Availability
Mission Critical Applications
Cold start on battery power
Enables the UPS to start without utility power
if required, allowing the connected equipment
to maintain operation in the event of an
emergency.
The Pulsar EX RT on-line double-conversion
technology is a requirement for the optimum
protection of today’s sensitive equipment environments. The increase in susceptibility to power
irregularities coupled with the advancement in
high-density blade servers, IP-centric converged
infrastructures, and server virtualizations requires
a seamless power protection schema to guarantee the best-of-breed in QoS ratings.
Automatic Bypass
The bypass capability serves as a protective
device. In the event of an overload or UPS fault,
the Pulsar EX RT automatically transfers the
connected equipment to utility AC power
source or backup generator.
Hot-Swappable Batteries 700/1000/1500RT
The Pulsar EX RT lets you
service the UPS module and
replace batteries without
interrupting the supply of
power to your applications.
2200/3200RT
Thus the hot-swap capability
delivers ease-of-use and maintainability.
Ease-of-Use
The Pulsar EX RT is designed with a comprehensive front panel user interface to assist IT managers in monitoring, controlling, and regulating
the protected computing environment. The builtin intelligence of the Pulsar EX RT provides automatic extended-battery (EXB) recognition and the
adjustable periodic automatic battery test, without
risk to the load, cutting down on troubleshooting
uncertainties. Included in the UPS intelligence is
the battery life monitoring system, which after
4 years of continuous UPS operation, performs
automatic notifications to IT managers for battery
replacement cycles. This feature allows for
advance disaster recovery (DR) planning of all
networked computing environments.
High Reliability and Enhanced Feature Sets
The Pulsar EX RT family provides Powershare™
outlet capabilities to save time and money by
allowing end-users to utilize remote management
of connected equipment. IT managers can restart
locked equipment by remotely switching ON/OFF
individual Powershare™ outlets on the UPS.
The Pulsar EX RT is ideal for the storage
server environments which require Digital Quality
Power as companies are increasingly deploying
large-scale, multi-server-attachment storage, disk
arrays, network-attached storage (NAS) appliances, or storage area network (SANs) to serve
as centralized repositories for corporate data.
High-speed interconnects such as SCSI,
Fibre Channel, or even Gigabit Ethernet
network applications require a constant stream
of communications and are susceptible to any
power abnormalities. For these network and
telecom applications, there is no substitute for
the Digital Quality Power you get from on-line
double-conversion technology.
Health and Hospital Medical Devices
are among the most sensitive of connected
equipment with safe and manageable power
protection requirements. Patient monitoring
devices, test equipment, and life-saving
electrical tools in hospitals are reliant upon
and value the peace-of-mind delivered by
on-line UPS technology.
Today’s industrial and manufacturing
applications are packed with more computercentric integrated components to improve
efficiencies and productivity. With these
advancements come the prerequisites for sturdy
and robust features such as the wide input
voltage tolerance, Remote Power Off (RPO), and
automatic bypass capabilities of the Pulsar EX RT.
In certain environments, the RPO also serves
within regulatory compliance as an Emergency
Power Off feature.
Front Panel LED Diagnostics Interface
Operation
Wide Input Voltage Range
This technology makes the Pulsar EX RT unique
in the market as end-users can adjust the input
voltage window to reduce the number of transfers to battery power while maintaining constant
output voltage. This maximizes the battery
power available for serious power problems
and extends battery life.
Frequency Converter
◗ Dual capability allows UPS to function
as a true frequency converter
◗ Automatic detection 50/60Hz
◗ No power derating
◗ No time limitations in frequency
conversion mode
• ON-LINE mode
• On battery
• On bypass
Status of
Powershare™ outlets
Alarms (when blinking)
ON/OFF
Test display/
Buzzer OFF
• Overload
• UPS fault
• Battery fault or warning
for battery replacement
Display
• % of battery charge
• Power consumption
when display button
is held down
EX RT~ High Density Network Integration for Long Runtimes
◗ Communication via
a remote display controller
adds mobility for the
IT manager
Network
Integration
Rack 2U/Tower versatile
700/1000/1500/2200/3200RT
◗ SNMP+ Web monitoring
◗ NMS integration: HP OpenView, IBM Tivoli
Netview, CA Unicenter®…
◗ Multiple server shutdown (Solution-Pac
software suite supplied as standard)
◗ Remote reboot of locked equipment
through individually switchable outlets
(Powershare™)
◗ The extended backup time of the Pulsar
EX RT allows end-users to shut down
non-critical equipment when on battery
to provide maximum runtime for the
equipment designated in the critical
equipment category. Powershare™ ensures
the safe restart of the computer systems
by allowing IT managers to control
sequential equipment startups. This
provides a protective measure to avoid
overload from simultaneously starting
multiple devices.
Easy Integration
◗ Available in versatile 2U Rack/Tower
form factor
◗ Comprehensive rack-mounting kit
included with all models
◗ Software suite included for Windows,
Linux, Solaris, HP-UX, AIX, MacOS, Netware
◗ Connection accessories
High Density
◗ 2U form factor for all models
◗ Optional EXB Battery extension
cabinets in 2U form factor
Solutions for Long Runtime
◗ 2.2kVA – more than 3hrs. backup time with
the addition of 4 EXB battery cabinets
◗ Fuel cell powerplant option
◗ Increased runtime for critical applications:
load shedding on programmable outlets
(PowershareTM)
Easy integration in high-density enclosures.
Software unrivaled anywhere in the industry.
EX RT~ enterprise level power management and NMS integration packages
Power Management
◗ Solution-Pac software suite
on CD, included with all UPSs
For server protection and local or remote
UPS management
◗ Network management card*
For Ethernet 10/100 network connection,
SNMP alerts, and Web-based monitoring
◗ Environment Sensor for SNMP/Web card*
SNMP and Web monitoring of Temperature +
Humidity + Status of 2 contacts
◗ Management-Pac 2 software suite on CD*
NMS integration kit : HP OpenView,
IBM Tivoli Netview, CA Unicenter®…
◗ Status information card*
For UPS monitoring through voltage-free
contacts + remote power-off function
◗ UPS Control LCD display*
Remote display (up to 25m) of UPS
interface and measures
*Optional features
UPS Driver software
◗ What is the software for?
♦ Customize advanced settings
of the UPS
◗ Where to find it?
♦ Solution-Pac CD supplied in the package
♦ On the MGE web site, download section:
http://www.mgeups.com/download/soft/embedded/embedded.htm
Pulsar EX RT Specifications
700RT
1000RT
1500RT
2200RT
3200RT
700/490
1000/700
1500/1050
2200/1540
3200/2080
Performances
Power rating VA/W
Technology
ON-LINE double conversion with automatic by-pass
Input voltage window AC (VAC)
60V to 142Vac at 33.3% load, 70V to 142Vac at 66.7% load, 80V to 142Vac at 100% load
Frequency
50/60 Hz , auto-select, input frequency 40-70 Hz, frequency converter
Output Voltage/Frequency
120V adjustable to 100V/120V/ 127V, 50/60 Hz +/- 0.5 %
Temperature
Storage -20º to +50ºC/Operation 0 to 40º C Low to high input line/From no load to Full SPS load
Overload capacity
110% – 130% : 12s then on by-pass, >130% : 1.5s then on by-pass
Battery test
Automatic battery test once a week (adjustable periodically through UPS-Driver software supplied)
Battery management
EXB auto recognition, automatic runtime adjustment , protection against deep discharge
Back-up times (in minutes at 50% /100% loads) 700RT
1000RT
1500RT
2200RT
3200RT
31/ 13
20 / 8
15 / 6
17 / 8
15 / 6
Standard Battery + 1 EXB
125 / 58
83 / 34
49 / 22
84 / 34
57 / 24
Standard Battery + 2 EXB
231 / 101
158 / 63
122 / 40
135 / 51
102 / 45
Standard Battery + 3 EXB
329 / 148
215 / 89
205 / 59
215 / 83
143 / 61
Standard Battery + 4 EXB
426 / 192
278 / 113
311 / 82
286 / 134
187 / 90
700RT
1000RT
1500RT
2200RT
3200RT
L5-20P
L5-30P
Standard Battery
Input/output connection
Input
Output
5-15P
5-15P
5-15P
8 Nema 5-15R
receptacles
8 Nema 5-15R
receptacles
8 Nema 5-15/20R
receptacles
4 Nema 5-15/20R and 1Nema 4 Nema 5-15/20R and 1Nema
L5-20R output recept. cord
L5-30R output recept. cord
outermost two are Powershare™
bottom two are Powershare™
Power management
Port standard
1 USB port + 1 Serial port
Available slot
1 slot for SNMP/Web Minislot card (Part No. 66244), status information card (Part No. 66246)
or Environment sensor for SNMP/Web card (Part No. 66846)
Remote Power Off
Option with status information card #66246
Standards
Approvals
UL, CSA UL, IEC 61000-3-2, FCC 47 CFR part 15, Class B
Performance and safety
UL, CSA UL, IEC 61000-3-2, FCC 47 CFR part 15, Class A
UL 1778/cUL, IEC/EN 62040-3, CSA 22.2 Nº 107.1
EX RT
Dimensions (H x W x D in inches) 700RT
1000RT
1500RT
2200RT
700/1000/1500
2200/3200RT
Rack 2U/Tower versatile
3200RT
UPS
3.4 x 17.25 x 18.75
3.4 x 17.25 x 18.75
3.4 x 17.25 x 18.75 3.4 x 17.25 x 25.75
3.4 x 17.25 x 25.75
EXB
3.4 x 17.25 x 18.75
3.4 x 17.25 x 18.75
3.4 x 17.25 x 18.75
3.46 x 17.25 x 24.9
3.46 x 17.25 x 24.9
EX RT weight (in lbs.)
42 lbs.
42 lbs.
46 lbs.
80.8 lbs.
82.7 lbs.
EXB weight (in lbs.)
54 lbs.
54 lbs.
54 lbs.
92.8 lbs.
92.8 lbs
Warranty (US & Canada)
Parts and labor
Two year product warranty
EX RT Part Numbers
700RT
1000RT
1500RT
2200RT
3200RT
Rack 2U/Tower Versatile design
85070
85100
85150
85220
85320
EXB battery extension
85001
85001
85001
85000
85000
MGE UPS SYSTEMS
USA (headquarters)
1660 Scenic Avenue
Costa Mesa, CA 92626
tel
(800) 523-0142
(714) 557-1636
fax
(714) 557-9788
T H E
CANADA
#9, 2798 Thamesgate Dr.
Mississauga, ON L4T 4E8
tel (905) 672-0990
(877) 672-0990
fax (905) 672-7667
ARGENTINA
Thames 91
1609 San Isidro
Prov de Buenos Aires
tel (54) 11-4766-8777
fax (54) 11-4766-6008
©MGE UPS SYSTEMS, Inc. All specifications subject to change without notice. The MGE UPS SYSTEMS logo is a trademark of MGE UPS SYSTEMS.
U N I N T E R R U P T I B L E
BRAZIL
Avenida Guido
Caloi 1985 (GALPAO 23)
Guarapiranga
Sao Paulo - SP, CEP 05802
tel (55) 11-5515-9255
fax (55) 11-5515-9250
EXBs are versatile for all models
P O W E R
MEXICO
Ave. Congreso de la
Union
#524 Colonia Santa Anita
Mexico D.F 08300
tel 525 538 9687
fax 525 530 7625
P R O V I D E R
www.mgeups.com
info@mgeups.com
Pulsar EX RT
Revision 104
Effective: February 2005
Download PDF