Draco | 474 Series | Data sheet Draco major

Crosspoint switch – 32 inputs to
up to 16 outputs
32:16 Single-Head KVM switch
16:8 Dual-Head KVM switch
8:4 Quad-Head KVM switch
Supports DVI-D instant switching
(+ USB keyboard/mouse)
Supports USB 2.0 switching
Supports VGA input
For distances up to 140 m @Cat X,
400 m @multi-mode 50µ, 10 km @
single-mode 9µ
19“- Housings
DVI-D
CROSSPOINT SWITCH
SINGLE-HEAD KVM SWITCH
DUAL-HEAD KVM SWITCH
QUAD-HEAD KVM SWITCH
Technological description
Input Interface
Output Interface
Resolution
Options:
Distances:
DVI-D Switch:
Crosspoint
Single-Head KVM
Dual-Head KVM
Quad-Head KVM
The Draco major switch sets a milestone in the world
of matrix switches.
For the first time, the quality of DVI sources can be
switched through a matrix switch. Highest resolutions
of up to 1920x1200 (Dual Link up to 2560x2048
projected) in combination with long distances open
up the multifaceted possibilities.
Control:
Power Supply
Sizes
Cat X or Fiber
Cat X or Fiber
DVI-D, max. 1920x1200@60Hz
USB keyboard/mouse (USB HID), USB 2.0
serial/audio
each Cat X connection up to 140 m
each multi-mode connection up to 400 m
each single-mode connection up to 10 km
WEB Interface, FTP, Telnet, serial, USB, keyboard, IR-RC
90...240VAC internal PSU 150W – optional available with
redundant PSU 2x150W
440 x 85 x 443 mm
19” Housing 2 U
In KVM switch mode the access is always done via
the connected keyboard with a comfortable On
Screen Display (OSD). Additionally it is possible to
make the control access via serial interface or with
network access. This allows, using this device as a
matrix switch in combination with commercially
available media control devices.
Highlights
DVI-D 1920x1200@60Hz/ up to 24Bit colors
USB keyboard/mouse (depending on device)
Optional available with USB 2.0, serial/audio
A User Management in up to 1000 levels allows a
detailed right level for each console place, for each
CPU and/or for each switch.
Up to 16 independent users
The device can be easily set to the various modes of
operation.
Besides of the most popular operation mode KVM
Switch, the device can also handle Dual-Head or
Quad-Head applications.
The OSD or Web Interface allows displaying the
actual port connectivity, user connectivity… at any
time.
140 m @ Cat X,
400 m @ multi-mode 50µ,
200 m @ multi-mode 62,5µ,
10 km @ single-mode 9µ
In the operation mode ‚KVM Switch’, the special
feature ‚Partner Viewing’, allows, to double the own
screen content to one or more additional screens.
Perfect, if you want to show your content additionally
on a video-projector or if you want to make your
screen available for your administrator. The feature
‚Follow- Me’- allows, that even when you switch to
another CPU, the connected screens will follow.
The Administration of the system is regularly done by
a console and a user with administrator rights or
comfortable through the built-in Web Interface.
Additionally the administration can be done via the
equipped IR-remote control
One operation mode reproduces an often required
function in Control Rooms: Several monitors can be
assigned to a workplace. The CPUs displayed on
these monitors can be easily selected from the list of
available CPUs. With a short key you can switch fast
and easily the keyboard/mouse to each monitor and
control the attached CPU.
In the operation mode Crosspoint Switch, the Draco
major allows applications in conference rooms or in
Digital Signage applications.
In Educational Environments, an additional operation
mode sets the system to a student/teacher
configuration. The teacher can always switch to the
monitor of each student for observation. In the
configuration for up to 15 students, the teacher can
additionally switch his screen content or this of any
student to the other students. In the configuration for
up to 31 students, he can switch his or the screen
content of any student to a common screen (e.g.
video projector).
The complete system, with all built-in boards and
components can easily be upgraded with the most
recent firmware version. To do this, you only have to
upload via FTP the necessary Upgrade files into the
device.
A Draco major Switch System is always configured
like described below:
•
•
•
•
•
At each signal source (CPU) a local unit is
installed.
Using Cat X or fiber cables (depending on
device type) the connection to the Draco major
unit is made.
Optional, using Cat X or fiber cables
(depending on device type) you can make the
connection to a master Draco major.
At each console (monitor) a remote unit is
installed.
Using Cat X or fiber cables (depending on
device type) you can make the connection to
the Draco major.
The Draco major switch uses identical boards for in
and output. Because of this you get money savings
in inventory costs and a higher availability.
Up to 1024 connected CPUs
Power Supply 90...240VAC with internal PSU –
optional available with redundant PSU
E/A boards available for Cat X, multi-mode, singlemode or for user selectable assembly
Online upgrade possible
User management and access right management
in up to 1000 levels
Comfortable configuration and CPU naming
Access via OSD (On Screen Display), via serial
interface or graphical Web Interface
Operating Modes:
Crosspoint switch with up to 32 (1024) CPUs (graphic
sources) and up to 16 monitors
KVM switch:
Single-Head (1x Graphic),
Dual-Head (2x Graphic) or Single-Head / USB2.0
Quad-Head (4x Graphic) or Triple-Head / USB2.0
Control room mode
In KVM mode: ‚Partner Viewing’ with ‚Follow Me’: The
own screen content may be doubled to one or more
additional screens. Perfect for presentations or
administrator support. When switching to another
CPU, the connected, additional monitors will follow
unless they are released by the user.
Teacher/Student mode for maximum 15 students in
‚Full Access’ or. maximum 31 Students in ‘Public
Access’
Operation Modes
Crosspoint Switch
Maximum system (without cascading): 32 Signal sources to 16 monitors or in reverse mode 16 sources to 32
monitors.
Assembly: At each of up to 32 DVI signal sources a local unit is installed. The crosspoint switch can be installed
up to 10 km remotely from the local units (depending on device).
The incoming signals (DVI + optional serial/audio) can be switched to the output connectors. Here it is allowed, to
distribute one input signal to several output connectors.
From these output connectors you can go to the (up to 10 km remotely located) display units. For this, at each
display a remote unit is installed.
Switching between the signal sources is done via serial interface or via WEB Interface.
KVM Switch
Using the Draco major as a KVM switch allows multiple operation modes:
• 16 consoles at 32 CPUs for Single-Head access, 8 consoles at 16 CPUs for Dual-Head or 4 consoles at 8
CPUs for Quad-Head (in a homogeneous configuration)
• You can also have a system, where you mix Single-Head/ Dual-Head/ Quad-Head CPUs/ consoles. The
maximum quantity of consoles/CPUs depends on your private configuration.
At each of up to 32 CPUs a local unit is installed. The KVM switch can be installed up to 10 km remotely from the
local units (depending on device).
The incoming signals (DVI, keyboard/mouse + optional serial/audio) can be switched to the output connector.
From these output connectors you can go to the (up to 10 km remotely located) consoles. For this, at each
console a remote unit is installed.
Switching between the CPUs:
• via serial communication
• pressing a key sequence at the remotely attached keyboard (in KVM switch mode only)
• accessing a comfortable OSD (On Screen Display). It allows selecting the CPUs, user administration and
other administrative functions.
• accessing via graphical WEB interface using an internet browser
• For complex switching scenarios, the device can also be switched via a commercially available media control
device.
The special feature ‚Partner Viewing’, allows, to double the own screen content to one or more additional screens.
Perfect, if you want to show your content additionally on a video projector or if you want to make your screen
available for your administrator. The feature ‚Follow Me’-mode allows, that even when you switch to another CPU,
the connected screens will follow.
Optionally, instead of accessing a CPU, you can cascade a second KVM switch at each (CPU) Port. This allows to
control up to 1024 CPUs with one monitor (Single-Head), 256 CPUs with two monitors (Dual-Head) or up to 64
CPUs (Quad-Head).
It is allowed, to make a cascaded configuration, where you stack several switches to raise the number of
accessible CPUs. But please note, the number of connections between two switches limit the number of users
with simultaneous access to the CPUs of the second stage (blocking access).
Control Room Mode
The control room mode is a special mode of the KVM switch mode. In the control room mode it’s allowed, to
attach several monitors (unlimited number, only limited by stage of expansion) to a single console. The CPU
displayed on each monitor is freely selectable from the list of available CPUs, using the comfortable OSD.
Using a hotkey sequence, the user easily and fast can switch the keyboard/mouse to the CPU, attached to one of
its related screens. Here he not necessarily needs to know the number of attached CPU. Now he can access and
control the attached CPU. Also in this mode one (or more) screen(s) can be doubled to an additional screen
(‚Partner Viewing’).
Student/ Teacher System
Two possible configurations:
a) Up to 15 students – each student’s workplace and the teachers workplace is connected via Cat X duplex cable
using a local + remote unit. Each CPU can be displayed on each workplace – all students and the teacher’s
workplace – also on all workplaces simultaneously. The teacher can observe each student.
b) Up to 31 students – each student’s workplace and the teachers workplace is connected via Cat X simplex cable
using a local unit. Each CPU can be displayed on a common monitor (e.g. video projector) – all students and the
teachers workplace. The teacher can observe each student.
Boards and order notation
Cat X E/A board
Fiber E/A board
Cat X – KVM remote unit
(example)
OSD board for 8 users
Control board with
communication connectors
Display board
Product description
Draco major Switch devices Cat X
Draco major, 8x User / 8x CPU
Draco major, 8x User / 16x CPU
Draco major, 8x User / 24x CPU
Draco major, 8x User / 32x CPU
Draco major, 16x User / 8x CPU
Draco major, 16x User / 16x CPU
Draco major, 16x User / 24x CPU
Draco major, 16x User / 32x CPU
Draco major Switch devices – free
configuration
Draco major, empty for free configuration
Draco OSD board
Draco Display board
Draco Cat X E/A board
Draco Fiber E/A board multi-mode
Draco Fiber E/A board single-mode
Draco Fiber E/A board empty, free configuration
Cat X GBIC for use in Draco minor/major
Multi-mode GBIC for use in Draco minor/major
Single-mode GBIC for use in Draco minor/major
Accessories (optional)
19” RMK for 1x...4x Media+KVM Single-Head
device
19”- RMK for 1x...4x KVM Dual-Head device
19"-p.s.u. to power up to 3 devices
Mounting plate to mount by screws
Draco upgrade to redundant power supply
P/N
K474-U8/C8
K474-U8/C16
K474-U8/C24
K474-U8/C32
K474-U16/C8
K474-U16/C16
K474-U16/C24
K474-U16/C32
K474-UX/CX
474-OSD
474-DIS
474-C8
474-M8
474-S8
474-X8
459-1C
459-1M
459-1S
455-4G
455-8G
455-PS
Product description
Draco major Media devices (no
keyboard/mouse)
Draco- Media Unit w/o audio/serial, Cat X
Draco- Media Unit w/ audio/serial, Cat X
Local
Remote
L459-0E
L459-AE
R459-0E
R459-AE
Draco- Media Unit, w/o audio/serial, multi-mode L459-0M
Draco- Media Unit, w/ audio/serial, multi-mode L459-AM
R459-0M
R459-AM
Draco- Media Unit, no Audio/serial, single-mode L459-0S
Draco- Media Unit, w/ Audio/serial, single-mode L459-AS
R459-0S
R459-AS
Draco major KVM devices (with
keyboard/mouse)
For Cat X (Cat5, Cat5e, Cat6, Cat7)
Draco- KVM Unit, Single-Head
Draco- KVM Unit, Dual-Head
Draco- KVM Unit, audio/serial, Single-Head
Draco- KVM Unit, audio/serial, Dual-Head
For Multimode Fibers 50/125µ or 62,5/125µ
Draco- KVM Unit, Single-Head
Draco- KVM Unit, Dual-Head
Draco- KVM Unit, audio/serial, Single-Head
Draco- KVM Unit, audio/serial, Dual-Head
For Singlemode Fibers 9/125µ
Draco- KVM Unit, Single-Head
Draco- KVM Unit, Dual-Head
Draco- KVM Unit, audio/serial, Single-Head
Draco- KVM Unit, audio/serial, Dual-Head
L459-0ES
L459-0ED
L459-AES
L459-AED
R459-0ES
R459-0ED
R459-AES
R459-AED
L459-0MS
L459-0MD
L459-AMS
L459-AMD
R459-0MS
R459-0MD
R459-AMS
R459-AMD
L459-0SS
L459-0SD
L459-ASS
L459-ASD
R459-0SS
R459-0SD
R459-ASS
R459-ASD
455-1K
474-RED
IHSE GMBH, MAYBACHSTR. 11, 88094 OBERTEURINGEN/GERMANY, PHONE +49 (0)7546-9248-0, FAX +49 (0)7546-9248-48, EMAIL@IHSE.DE
HRB 580617 AMTSGERICHT FREIBURG, UST.-ID-NR.: 146965085, GESCHÄFTSFÜHRER: HEINER ESSELN, DR. ENNO LITTMANN, PETER STRIEGEL
Download PDF