advertisement
Version 13
User Guide
ii
Copyright
Copyright
1991 - 2014. Dragon NaturallySpeaking Version
Dragon NaturallySpeaking 13.
This material may not include some last-minute technical changes and/or revisions to the software. Changes are periodically made to the information described here. Future versions of this material will incorporate these changes.
Nuance Communications, Inc. may have patents or pending patent applications covering subject matter in this document. The furnishing of this document does not give you any license to such patents.
No part of this material or software may be reproduced in any form or by any means, including, without limitation, electronic or mechanical, such as photocopying or recording, or by any information storage and retrieval systems, without the express written consent of
Nuance Communications, Inc. Specifications are subject to change without notice.
Copyright © 2014 Nuance Communications, Inc. All rights reserved.
Nuance, the Nuance logo, ScanSoft, Dragon, DragonBar, the Dragon logo,
NaturallySpeaking, RealSpeak, Nothing But Speech (NBS), Natural Language
Technology, Full Text Control, BestMatch, MouseGrid, and Vocabulary Editor are registered trademarks or trademarks of Nuance Communications, Inc. All other names and trademarks referenced herein are trademarks of Nuance Communications, Inc., or their respective owners. Many of the designations used by manufacturers and sellers to distinguish their products are claimed as trademarks, including the following:
Pentium is a registered trademark of Intel Corporation.
Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated.
Corel and WordPerfect are registered trademarks of Corel Corporation.
Lotus and Lotus Notes are registered trademarks of Lotus Development Corporation.
Microsoft, Microsoft Office, Microsoft Office Live, Microsoft Outlook, Microsoft Word,
Microsoft Excel, Microsoft PowerPoint, Microsoft InfoPath, Microsoft Access, Microsoft
Visual Basic, Microsoft ActiveSync, Hotmail, Outlook.com, Windows Internet Explorer,
Windows, Windows Live, Windows 8, Windows 7, Windows 7 Ultimate Server, Windows
Vista, Windows XP, Windows XP Professional, Windows XP Home, Windows Server
2003, Windows Server 2008, Windows NT, Windows 2000, and Windows 2000 Server are trademarks or registered trademarks of Microsoft Corporation.
Mozilla, Mozilla Firefox, and Mozilla Thunderbird are trademarks or registered trademarks of the Mozilla Foundation.
Google, Google+, Google Chrome, and Gmail are trademarks of Google, Inc.
VoiceIt, the VoiceIt logo, and VoiceIt Link are trademarks or registered trademarks of VXI
Corporation.
AMD is a trademark of Advanced Micro Devices, Inc.
SoundBlaster is a registered trademark of Creative Technology Ltd.
Yahoo! is a registered trademark of Yahoo! Inc.
Flash™ is a trademark of Adobe, Inc.
Boost Software License - Version 1.0 - © Copyright August 17, 2003.
Copyright
Permission is hereby granted, free of charge, to any person or organization obtaining a copy of the software and accompanying documentation covered by this license (the
"Software") to use, reproduce, display, distribute, execute, and transmit the Software, and to prepare derivative works of the Software, and to permit third-parties to whom the
Software is furnished to do so, all subject to the following:
The copyright notices in the Software and this entire statement, including the above license grant, this restriction and the following disclaimer, must be included in all copies of the
Software, in whole or in part, and all derivative works of the Software, unless such copies or derivative works are solely in the form of machine-executable object code generated by a source language processor.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-
INFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR ANYONE
DISTRIBUTING THE SOFTWARE BE LIABLE FOR ANY DAMAGES OR OTHER
LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.
Open Source Initiative OSI - The MIT License (MIT): Licensing iii
Copyright iv
The MIT License (MIT)
Copyright © 2013 Nuance Communications, Inc.
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS",
WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
Open Source Initiative OSI - The BSD 3-Clause License. © Copyright 1998, Regents of the University of California. All rights reserved.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: n
Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
n
Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
n
Neither the name of the University of California, Berkeley nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Dave Barry in Cyberspace, © Copyright 1996 by Dave Barry. Published by Crown
Publishers.
2001: A Space Odyssey, © Copyright 1968 by Arthur C. Clarke. Published by New
American Library.
3001: The Final Odyssey, © Copyright 1997 by Arthur C. Clarke. Published by
HarperCollins Publishers.
Dogbert's Top Secret Management Handbook, © Copyright 1996 by United Feature
Syndicate, Inc. Published by HarperBusiness, a division of HarperCollins Publishers.
Success Is a Journey: 7 Steps to Achieving Success& in the Business of Life, © Copyright
1999 by Jeffrey J. Mayer. Published by McGraw Hill.
Charlie and the Chocolate Factory, © Copyright 1964 by Roald Dahl. Published by Alfred
A. Knopf, Inc. and Penguin Books.
Charlie and the Great Glass Elevator, © Copyright 1972 by Roald Dahl. Published by
Alfred A. Knopf, Inc. and Penguin Books.
To Be a Man, © Copyright 1997 by Eugene and Miranda Pool.
The Captain of Battery Park, © Copyright 1978 by Eugene Pool. Published by Addison-
Wesley.
QR code is trademarked by Denso Wave, inc.
libqrencode 3.1.1 - QR Code encoding library - Copyright (C) 2006, 2007, 2008, 2009,
2010 Kentaro Fukuchi.
Reed-Solomon code encoder - Copyright (C) 2002, 2003, 2004, 2006 Phil Karn, KA9Q.
Copyright © 2007 James Newton-King
Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
Copyright
v
vi
Copyright
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
TweetSharp
Copyright (c) 2009-2013 Daniel Crenna, Jason Diller, and contributors
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.
Contents viii
Contents
Chapter 1: What's New in Dragon Version 13
Interactive Tutorial enhancements
Shorter Profile Creation Process
Open-ended custom commands (Professional and Legal editions only)
Chapter 2: Installing Dragon 17
Installation and User Profile Creation
What you should know before installing
Installing Dragon to a custom location
Installing Software - Typical Installation
Installing Software - Custom Installation
Modifying application settings for all users
Modifying formatting options for all users
Setting up, positioning, and checking your microphone
Working with Windows 8 and Windows 8.1
Using the Dragon Learning Center
Using the Interactive Tutorial
Using the Command line interface
Auto Configuration Based on System Profile
Contacting Customer Service and Support
Chapter 4: Using the New DragonBar or Classic DragonBar
Displaying the New DragonBar or Classic DragonBar
Working with the New DragonBar or Classic DragonBar
Chapter 5: Using the Microphone
Position your microphone properly
Chapter 6: Using the Dragon Learning Center
Using the Dragon Learning Center
Correcting text errors as you dictate
Chapter 8: Using the Dictation Box
Changing the way text wraps on your screen
Chapter 10: Making Corrections
Correcting dictation - workflow
Correcting text - quick reference
Correcting misrecognized commands
Handling multiple text matches
Revising text - quick reference
Contents
ix
x
Chapter 12: Moving around in a document
Moving to the beginning or end of a document or line
Using "Go Back" to move the cursor
Selecting text - quick reference
Selecting characters and words
Selecting specific words or phrases
Selecting lines and paragraphs
Changing an incorrect text selection
Chapter 14: Deleting, Cutting, and Copying Text
Deleting characters, words, lines, or paragraphs
Setting font name, size, and style
Adding new lines and paragraphs
Setting Auto-Formatting Options
Chapter 16: Working in Programs
Using the Microsoft Office ribbon
Chapter 17: About spoken commands in word processing programs
About spoken commands in word processing programs
Dictating in your word processor
Basic document commands in Microsoft Word
Creating, opening, and closing a document
Formatting text in Microsoft Word
Contents
Commands for working with e-mail messages
Commands for moving around in e-mail
Dictating e-mail and Web addresses
Commands for Windows Live Mail
Chapter 19: Working with Web applications
About the Dragon Web Extension
Browser requirements for the Dragon Web Extension
Installing and enabling the Dragon Web Extension
How to tell if the Dragon Web Extension is Enabled
Editing text in a supported Web application
Using Dragon's Web capabilities without the Dragon Web Extension
If you have problems using Web application support
Chapter 20: Working with Web browsers
Chapter 21: Working on Your Desktop
Using Windows Desktop commands
Selecting buttons and dialog box options
Selecting tabs in a dialog box
Scrolling in windows and lists
Switching between programs and windows
Chapter 22: Controlling the Mouse and Keyboard
Positioning the mouse pointer with MouseGrid
Clicking and dragging the mouse
Chapter 23: Improving recognition accuracy
Top 10 ways to improve accuracy
Contents
xi
xii
Chapter 24: The Dragon Accuracy Center
Running the Acoustic and Language Model Optimizer
Chapter 26: Teaching Dragon to Understand You Better
Training misrecognized commands
Training individual words and phrases
Chapter 27: Personalizing your Dragon Vocabulary
About personalizing your Vocabulary
Adding words or phrases to your Vocabulary
Learning from specific documents
Adding words with the Spelling window
Adding contact names to the Vocabulary
Using the Don't Recognize That Word Command
Chapter 28: Managing Vocabularies
Chapter 29: Using the Command Browser
Finding commands in the Command Browser
Training commands in the Command Browser
Contents
Dragon User Guide
Chapter 1: What's New in Dragon
Version 13
14
Web experience
The Dragon Web extension now gives Full Text Control in Chrome and Firefox as well as in
Internet Explorer, in most websites. In order to use Dragon in the supported browsers, you must enable this add-on.
There are some differences in functionality between browsers. When you are in Internet
Explorer, Firefox, or Chrome, see the Learning Center for commands you might want to say, as well as tips.
For more information, see Enabling Rich Internet Application support .
Enhancing Accuracy
In addition to higher out-of-the-box accuracy, Dragon 13 introduces enhancements to what you can do to increase your accuracy:
The Learn From Sent Email tool now also works with Web-based email such as Gmail and
Yahoo Mail, so you have more potential sources from which to let Dragon familiarize itself with the words and phrases you might write.
The Vocabulary Editor now has a Search field and lets you search on more than just written forms. Also, it makes it easy to add a custom Dictation Command.
Note: the Word Properties dialog box (which is accessed through the Vocabulary Editor) now uses the term “printed form” instead of “alternate written form.”
For Canadian customers: when creating a profile, you can now pick Canada as your region so that Dragon's vocabulary will contain spellings such as "honour" instead of "honor."
Compatibility Alerts
If its add-in for a supported application (such as Microsoft Word) becomes disabled, Dragon now displays a warning. (These add-ins enable Full Text Control; they are known as
“compatibility modules.”)
This can be turned off on the Miscellaneous tab of the Options dialog.
Chapter 1: What's New in Dragon Version 13
For details, see The Options dialog box Miscellaneous tab.
New DragonBar
Dragon now includes a redesigned DragonBar. The New DragonBar can be dragged to a different location as well as expanded or collapsed by clicking on its left edge. To take up less space on your screen, it automatically collapses when you’re not using it. You can use its
DragonBar menu to turn off the auto-collapse, if you wish, or to exit Dragon.
The DragonBar from version 12 is still available. If you’re an existing Dragon user and you’re more comfortable using the Classic DragonBar, you can easily switch back to it.
For details, see The DragonBar.
Learning Center
The Learning Center is the new name of the Help menu item previously called the Dragon
Sidebar (a narrow window listing commands and advice, so you can refer to it as you work).
In Dragon 13, it has been redesigned and enhanced. It now contains panels you can open or close by clicking on their heading; the top panel, open by default, contains essential commands and advice.
By default, this window is set to Floating but in a shorter height, to cover less of any window that may be under it.
For important details on how to control the Learning Center and how to change its behavior
and appearance (font size, docking, width, etc.), be sure to read Using the Dragon Learning
Interactive Tutorial enhancements
The Interactive Tutorial has been redesigned and augmented. Its short, progressive simulations now also introduce the DragonBar, the Learning Center, the Vocabulary Editor, and important options, as well as basic Web navigation and use of Web-based email.
It is automatically presented at the end of the profile upgrade process as well as after a new profile is created.
Note: In the simulations that contain the punctuation “period” one can use the pronunciation
“full stop” instead.
Shorter Profile Creation Process
For the first profile, the profile creation wizard simply assigns the profile a name rather than asking you to enter a name (if you want to rename the profile later, use the Manage Profiles dialog).
The step where Dragon proposed reading a text aloud is now omitted. (As before, you can read a training text after creating your profile; see “Read text to train Dragon to your voice” in the Accuracy Center.)
Similarly, the step where Dragon offered to adapt its vocabulary based on documents and sent emails is now omitted, and you can launch the analysis of documents and emails once your profile is created.
15
16
Dragon User Guide
Simplified Audio Setup
Dragon now detects audio devices better. In most cases, when Dragon presents the list of detected devices, you can just pick the device it shows as recommended and continue.
In addition, the Microphone Check is now just one screen and its text is easier to read.
Important: Using more than one input device is now done by picking Manage Dictation
Sources on the DragonBar’s Profile menu. If you add multiple audio sources in your profile, you benefit from your profile’s refinements (such as changing an option, correcting an error, or analyzing emails to personalize the vocabulary) whenever you use Dragon, regardless of what audio device you’re speaking into (for instance, you could create your profile with a builtin microphone and later add a Bluetooth headset microphone as a source in that same profile.
For details, see Using Multiple Dictation Sources with a Single User Profile.
Open-ended custom commands (Professional and Legal editions only)
In the Professional and Legal editions, Dragon now offers new flexibility for custom command types that support variable names: the ability to end the command’s name with any word or
phrase in the vocabulary, as opposed to a word or phrase from a defined list of command variables.
This can allow users to have, for instance, commands that search for given words within their company’s intranet (similar to the built-in search commands like “search Wikipedia for…”).
Always replaces Ask Me as the default for deferred correction (Professional and Legal editions only)
The option to automatically create a recording (DRA file) along with your dictated document
(available in the Professional and Legal editions only) is now set to Always, by default.
If you wish, you can change it to Never or Ask Me on the Data tab of the Options dialog. DRA files can be large, so once you no longer need them you may want to delete them.
Note: The option ‘Always preserve wave data’ has been removed from the Options dialog (it was on the Data tab, under Advanced).
Operating System support
Support for Windows 8 is enhanced. The New DragonBar can be used in both of Windows
8's interfaces (the modern interface formerly known as Metro, as well as the desktop interface).
Professional and Legal editions only: The Remote Desktop Connection feature (to dictate from a networked computer on which Dragon is not installed) is now supported for Windows
Server 2012, in addition to Windows Server 2008 R2 and Windows 7 Ultimate Server.
Chapter 2: Installing Dragon
Chapter 2: Installing Dragon
This section contains the following topics:
Installation and User Profile Creation
What you should know before installing
Installing Dragon to a custom location
Installing Software - Typical Installation
Installing Software - Custom Installation
Modifying application settings for all users
Modifying formatting options for all users
Setting up, positioning, and checking your microphone
Installation and User Profile Creation
Introduction
This chapter presents how to install and set up Dragon, and then how to train Dragon to understand your voice.
The installation process checks to make sure your system meets the minimum system requirements needed for Dragon. These system requirements are listed in the information that came with your copy of Dragon. If your system does not meet these requirements,
Dragon will not be installed.
Plugging in the microphone
To use Dragon, you will need to plug in your microphone.
If you are not sure how to plug in your microphone, consult the documentation that came with your microphone.
17
18
Dragon User Guide
Note:
If you already have speakers for your computer, you can also use these to playback recorded speech instead of your headphones.
Dragon system requirements
The install process checks that your system meets the minimum requirements; if they are not met, Dragon NaturallySpeaking will not be installed.
Note:
Supports Microsoft Office 2010 & 2013. Does not support dictation directly into Electronic
Medical Record (EMR) systems. For EMR support, please use Dragon Medical Edition.
- RAM: Minimum: 2 GB for 32-bit Windows 7, 8 & 8.1. 4 GB for 64-bit Windows 7, 8 & 8.1
and Windows Server 2008 R2, Windows Server 2012.
- CPU: Minimum: 2.2 GHz Intel® dual core or equivalent AMD processor. Faster
processors yield faster performance.
- Free hard disk space: 4GB
- Supported Operating Systems: Windows 7 32-bit and 64-bit; Windows 8 & 8.1, 32-bit and 64-bit; Windows Server 2008 R2; Windows Server 2012.
- Internet Explorer 9 or higher or the current version of Chrome or Firefox for Online Help.
- A sound card supporting 16-bit recording.
- A DVD-ROM drive for installation.
- A Nuance-approved microphone. See
support.nuance.com/compatibility
for more information.
- An Internet connection for automatic product activation (a quick anonymous process).
What you should know before installing
Installing Dragon to a custom location
The default installation directory for Dragon is:
C:\Program Files\Nuance\NaturallySpeaking13
During the installation procedure, you can choose to install Dragon to a different directory or drive on your machine.
Choosing a different directory during installation only installs the Dragon program files to that location.
Regardless of where you install the Dragon program files, Dragon always installs the languages and vocabularies that you selected during the installation to the C: drive, as well as
Chapter 2: Installing Dragon
creating the location where user profiles will be created. These profiles can consume a large amount of disk space on your C: drive.
You can customize your installation to reduce the amount of disk space used on your C: drive by not installing unwanted languages and vocabularies. For more information, see
Installing software — Custom Installation
.
Upgrading the operating system to Windows 7 or Windows 8
If you upgrade a machine from a previous version of Windows to Windows 7 or Windows 8 and that machine has Version 11.x or 12.x of Dragon installed, that version of Dragon will not work after upgrading. All your user profiles from these previous versions remain intact and can be upgraded when you install Dragon Version 13.
Coexistence with other Dragon products
Coexistence with previous versions of Dragon
You can have only one version of Dragon installed on your system.
Note:
Running a previous version of Dragon concurrently with Version 13 is not supported.
Coexistence with the Dragon SDK Client Edition
You can install Dragon SDK Client Edition 13 on the same machine where Dragon 13 is installed. In addition, Dragon 13 and Dragon SDK Client Edition 13 can share user profiles and vocabularies.
You can only run one product at a time. For example, if you are running Dragon, you cannot run any of the SDK Client tools or samples.
Note:
Coexistence of Version 13 with Dragon SDK Client Edition Version 11.x, or 12.x is not supported.
Installation Prerequisites
Before installing the software (or modifying or upgrading it)
1. Close all open applications.
2. Turn off or disable antivirus software; the installation process can sometimes trigger a false virus report.
Note: You must have Administrator rights to install or uninstall Dragon on Windows 7 or
Windows 8. Administrator rights are not required to create a Dragon user profile or use the software after installation.
On Windows 7 and Windows 8 systems, if as an administrator you want to create a Dragon user profile for a Windows limited user (user with restricted privileges), you must log on using that Windows limited user account before creating the Dragon profile.
If you create a Dragon profile for a limited Windows user while logged in as a Windows administrator, the limited user will not be able to access that Dragon profile. These
19
20
Dragon User Guide
restrictions also apply to an upgrade installation.
3. Choose the type of installation to carry out.
Choose whether to install the entire product or only particular features of the product, as explained in the next section.
You can also carry out an MSI installation. Refer to the online Dragon System Administrator
Guide PDF or Help file for details.
Choosing type of installation
When you install Dragon, you can either do a complete (typical) installation or a custom installation. Nuance recommends you do a complete installation unless you are experienced with the product. The table below tells more about each installation type.
TYPE DESCRIPTION
Typical/
Complete
Installs all components (including all vocabularies and languages available in your edition of the software).
Requires the maximum disk space.
Custom Lets you select particular components to install (including, depending of your edition of Dragon, languages, vocabularies, and the Text-to-Speech function).
Can greatly reduce the disk space required.
During a custom installation, in the Professional and Medical editions, you can modify settings that are then applied to all user profiles created with this installation, including Windows limited account users.
Note
If you decide not to install some Dragon components by selecting Custom installation, you can install them later by running the Setup program again and choosing Modify.
If you are installing the product for multiple users, you should choose a Custom installation rather than a Typical/Complete installation. To carry out a custom installation, proceed to
Installing software — Custom Installation
. Otherwise, see Installing software — Typical
Installing Software - Typical Installation
To install all features of Dragon:
1. Insert the Dragon DVD into your DVD drive.
If the installation does not start automatically, use Windows Explorer to find and double-click
setup.exe on the DVD.
2. After the Windows Installer begins, it installs: n
Visual C++ Version 9.0 Runtime
3. After the Wizard begins, click Next to proceed to the License Agreement page. Read the text and select I accept the terms..., then click Next.
Chapter 2: Installing Dragon
4. Enter your User Name and Organization, and the Serial Number supplied to your installation.
5. (Optional) When the Setup Type page appears, click the Change button and choose where to install the product.
If no earlier versions of Dragon are installed on your system, the default directory is:
C:\Program Files\Nuance\NaturallySpeaking13
For a list of directories created by installation, see Version 13 File Structure.
6. While you are still on the Setup Type page, select Typical.
7. Click Install to start the installation.
8. When prompted, click Finish to complete the installation. (If you are prompted to restart your computer, restart it now.)
9. Select Start > All Programs > Dragon NaturallySpeaking > Dragon NaturallySpeaking.
The New DragonBar appears on your desktop.
10. (optional) If you have user profiles that you would like to upgrade before proceeding, see
Upgrading User Profiles.
11. If you have no upgradable profiles, the Profile Creation wizard starts immediately after you run the product. Proceed to Creating your User Profile to set up a User Profile, continue as instructed.
You are now ready to create a User Profile, as explained under Creating your User Profile.
Installing Software - Custom Installation
To install portions of Dragon or to install it for multiple user profiles:
1. Insert the Dragon DVD into your DVD drive.
If the installation does not start automatically, use Windows Explorer to find and double-click
setup.exe on the DVD.
2. After the Windows Installer begins, it installs: n
Visual C++ Version 9.0 Runtime
3. After the Wizard begins, click Next to proceed to the License Agreement page. Read the text and select I accept the terms..., then click Next.
4. Enter your User Name and Organization, and the Serial Number supplied to your installation.
5. (Optional) When the Setup Type page appears, click the Change button and choose where to install the product.
If no earlier versions of Dragon are installed on your system, the default directory is:
C:\Program Files\Nuance\NaturallySpeaking13
21
22
Dragon User Guide
For a list of directories created by installation, see Version 13 File Structure.
6. While you are still on the Setup Type page, select Custom for the type of installation.
Note: If you decide not to install some Dragon components by selecting Custom installation,
you can install them later by running the Setup program again and choosing Modify.
7. Click Next and you see a tree where you can select any particular feature of the product and click the down arrow to its left to choose where/when to install it: n
Install now, on local hard drive n
Install now, with all subfeatures on local hard drive n
Install when it is needed on a just-in-time basis
These options are particularly useful for installing multiple languages and/or multiple vocabularies.
Installing other languages, dialects, and specialized vocabularies To install user files for the other languages or dialects supplied with your edition, choose Custom on the Setup Type page. The user files for each language or dialect contain both spellings and pronunciations specific to that region. For example, users who wish to dictate US English spellings— including users with accents—should install the US (American) English user files.
8. Click Next again and, if you do not have the Professional edition, skip to the next step.
Otherwise, choose any check boxes under Additional options to have additional dialog boxes pop up at the end of the installation, where you can make changes that affect all users dictating on this computer.
Modify the application’s settings for all users
Displays the Options dialog box at the end of the installation; here you set several options for all user profiles at once (see online Help for details). Useful for an installation in a shared area; for example, in a conference room or in an examining room where multiple healthcare professionals could dictate.
Modify the administrative settings
Displays the Administrative Settings dialog box at the end of the installation, where you set up the Roaming User feature, where to backup your files, and who can modify commands/vocabularies.
Modify the formatting options
Displays Auto-Formatting dialog box at end of installation, where you apply uniform formatting to all documents dictated at this installation; for example, formats for dates, times, and phone numbers. You also set whether to expand contractions, apply abbreviations, and insert commas automatically. See online Help for more details.
9. Click Next.
Chapter 2: Installing Dragon
10. Click Install to start the installation.
11. When the installation completes, proceed with any of the following sections that apply to your custom installation: n
Modifying application settings for all users n
Modifying administrative settings n
Modifying formatting options for all users
12. When you are prompted to register the product, select one of the registration options.
13. Click OK to register the product and click it again to proceed.
14. Check Yes, check for program updates after the setup completes to download any updates after the setup completes and click Finish to complete the installation.
15. If you chose to upgrade user profiles earlier, when the message about upgrading your user profiles pops up, click OK. (The message might tell you that the installation will not be complete until after your system is restarted.)
16. If you were told you need to reboot in order to complete the installation, reboot your computer now.
17. Select Start > All Programs > Dragon NaturallySpeaking > Dragon NaturallySpeaking.
The New DragonBar appears on your desktop.
18. (optional) If you have user profiles that you would like to upgrade before proceeding, refer to Upgrading User Profiles. Otherwise, if you have no upgradable existing profiles, the
Profile Creation wizard starts immediately and you can create a profile as explained in
Creating your User Profile.
Modifying application settings for all users
If you checked off Modify the application’s settings for all users during a custom installation, the Options dialog box opens immediately after the installation completes.
Note
If you did a typical installation, open the Options dialog box by opening Dragon and selecting
Options from the DragonBar's Tools menu.
In the Options dialog box, you see several tabs you can use to configure various aspects of the product:
For more information on each tab, see the online Help (start with the topic The Options dialog box ).
23
24
Dragon User Guide
Modifying administrative settings
Note
If you performed a typical installation, open the Administrative Settings dialog box by running
Dragon without opening a profile and selecting Administrative Settings from the Tools menu.
In the Administrative Settings dialog box, you see the following tabs: n
Roaming—To set up roaming users.
n
Miscellaneous—To create backup/distribution directories and control who can modify custom commands (or vocabularies).
n
Scheduled Tasks—To schedule accuracy optimization and Data Collection (to improve future releases), and to let users modify the schedule of tasks.
For details, refer to the Help by clicking the Help button.
Modifying formatting options for all users
If you chose to modify formatting options on the Custom Setup page during a custom installation, the Auto-Formatting dialog box opens after the installation completes.
Note:
If you did not do a custom installation and you want to view or change the Auto-Formatting options: launch Dragon, open a user profile, and select Auto-Formatting Options from the
Tools menu on the DragonBar.
The Auto-Formatting dialog box appears as shown below.
Chapter 2: Installing Dragon
For details about these options, click the Help button on this dialog box or see the Help topic
The Auto-Formatting dialog box .
Creating your user profile
Each person who uses Dragon must have his or her own user profile.
Your user profile stores acoustic information about your voice that Dragon uses to recognize what you say. It also stores changes you make to the standard options and vocabulary—any special words, names, acronyms, and abbreviations you add.
When you launch the software for the first time, the Profile Creation wizard starts and leads you through creating your profile:
25
Dragon User Guide
26
Note:
Note:
If you upgraded a single profile from an earlier version, Dragon opens that profile. If you upgraded multiple profiles, it displays all upgraded profiles in the Open User Profile dialog box.
To create a user profile
Proceed through the wizard, filling in the information it requests and clicking Next to proceed.
Note:
The wizard asks for region of the world you live in to help Dragon transcribe your speech in accordance with regional differences.
Dragon lets you have profiles in multiple languages. If your edition supports more than one language, you can install additional languages by choosing Custom during the installation and having the Dragon DVD available to install the language files during the profile creation process.
Dragon automatically chooses a speech model to use as the foundation for your profile and a vocabulary it uses to recognize words based not only on their sound but also on their context.
If you want to select a particular speech model and vocabulary, you can click the Advanced button.
When the Choose an audio device page appears, Dragon scans your system and presents a list from which you select your type of audio device. Next, Dragon has you position and check your microphone. When Dragon asks you to read a short text aloud so that it can check your audio input and make some adjustments, click the Start button and read the text as if you were dictating to the software (this takes about 30 seconds).
Chapter 2: Installing Dragon
Setting up, positioning, and checking your microphone
Positioning the microphone correctly is important. If the microphone is out of place, Dragon might not be able to hear you clearly and make mistakes.
Consistent positioning is also important. Make sure that you position the microphone the same way each time you dictate.
Here are some tips on using particular types of microphones:
Using a headset microphone
n
Position the microphone about a half-inch (approximately the width of your thumb) from your mouth and a little off to the side. The microphone should not touch your mouth, but it can be almost touching your lips.
n
If you need to move the microphone out of the way, lift the “boom” up and over your head, rather than bending it out of position or removing the headset.
Using a hand-held microphone
n
Hold the microphone one to three inches from your mouth and a little off to the side.
n
When dictating to Dragon, If the sound level is unacceptable or volume check fails, a notification page pops-up, try holding the microphone slightly farther from your mouth.
Using an array microphone
n
Position the array 18 to 30 inches from/pointed at your mouth. n
Avoid blocking the path between your mouth and the array, for example by holding a book or paper in front of your face. n
Avoid having any source of noise or signal other than your voice directly facing the array within at least 15 feet.
Microphone Check
After you have positioned the microphone and clicked Next, you see a screen containing text for you to read out loud.
Click that screen’s Start button and then read aloud the text displayed in the box. When the program has heard enough, it displays Audio quality is acceptable. Click Next to continue. If it displays “The audio quality is unacceptable”, make sure your microphone is positioned properly and that you are speaking loudly enough. Then try the Microphone Check again.
Training a user profile
Performing training after creating a user profile is one of the ways you can personalize your profile and obtain higher accuracy. It is done by reading aloud for several minutes from one of the available texts Dragon offers.
Note:
For information on acoustic training the transcription of recordings, see http://www.nuance.com/dragon/transcription-solutions/index.htm
27
28
Dragon User Guide
From the DragonBar's Profile menu, select Open User Profile and select your profile in the list then click Open. From the Audio menu, select Read text to improve accuracy.
To train a profile
1. In the Read Training Text page, under Choosing text to read, choose a text to read aloud and click Next.
2. When the Text Display page appears, choose how you want to read the text, from the screen or from a printed page. If you choose to read from a printed page, click Print to print the text.
3. If you chose to read the text from the screen, the Speaking to the computer page appears and advises you to position your microphone.
4. After you position your microphone, click Train to begin.
5. In the Speaking to the Computer pop-up, click Begin Training and read the text in the box.
6. Click Next and proceed with the reading.
Notes:
You need to read for only about 5 minutes.
You can take breaks during your reading by clicking Pause.
Try to read the text exactly as it is, but it’s okay if you read something incorrectly.
When you read training text, you don't have to dictating punctuation but consider reading at least the periods or the commas (this is an opportunity for you to practice saying punctuation and also helps you speak with a tone and speed that's more similar to how you will dictate than how you speak when simply reading something out loud).
When you’ve read enough, Dragon displays a congratulations message. Click OK and
Dragon starts adapting to your voice.
Upgrading User Profiles
If you chose to upgrade existing user profiles during the installation, the User Upgrade Wizard appears the first time you run Version 13.
Note:
If you do not want to upgrade user profiles right now, you can exit from the wizard and do it later.
Otherwise, you can start the User Upgrade Wizard from the Windows Start menu at any time.
To upgrade existing user profiles:
Chapter 2: Installing Dragon
29
Dragon User Guide
30
1. To start the User Upgrade Wizard, select Start > All Programs > Dragon
NaturallySpeaking > Dragon NaturallySpeaking Tools > Upgrade Users. The User
Upgrade Wizard appears.
2. On the Select Users to Upgrade page, modify the list to include only the user profiles that you want to upgrade now. The wizard starts by including all user profiles in the current folder as candidates to upgrade. You add to the list by clicking the Add button and browsing for additional user profiles in other locations. You remove user profiles from the list by selecting them and clicking the Remove button. After the list contains only the user profiles you want to upgrade, click Next.
3. Click Next and choose the location for the upgraded user profiles. As the User Upgrade
Wizard modifies your user files to work with the newest version, it can place the upgraded user in another location while keeping the old files untouched, in case you need them again.
4. Click the Browse button in the Choose Destination page of the wizard to select the location for the upgraded user profiles. If you do not set a location, Dragon places the profiles in the default location (see Version 13 File Structure).
5. (Optional) If you want to make changes to the user locations, base vocabularies, and/or acoustic models, click the Advanced button and the Advanced Options dialog box opens.
In this dialog box, you can make finer adjustments to how the wizard upgrades particular users. You see a list of the users being upgraded. For each user profile, you see the profile name, old location, vocabulary, and one or more acoustic models.
When you click on the location line of a user profile in the list, the New Location text box
Chapter 2: Installing Dragon
below the list becomes available. You can click Browse and select a new location.
When you click on the vocabulary line of a user profile in the list, the New Base
Vocabulary text box below the list becomes available. You can choose a new base vocabulary from the drop-down list.
When you click on the acoustic model line of a user profile in the list, the New Acoustic
Model text box below the list becomes available. You can choose a new combination language, language model, and accent from the drop-down list.
6. Click OK to return to the wizard.
7. Click Next to proceed to the Upgrade Users page where you click Begin to begin the upgrade process. Expect to wait approximately 5 minutes for each user profile being upgraded.
8. When the upgrade process is complete, click Finish.
Default installation folders
Dragon sets up the following default folders and file locations for application and data file storage during installation:
Windows 7/Windows 8
Dragon log, Upgrade log
C:\Users\All Users\Nuance\NaturallySpeaking13\logs\<user_name>
User Profiles
C:\ProgramData\Nuance\NaturallySpeaking13\Users
Roaming User Profiles (local folder)
C:\ProgramData\Nuance\NaturallySpeaking13\RoamingUsers
Vocabularies and Acoustic Models
C:\ProgramData\Nuance\NaturallySpeaking13\Data
Custom words and commands
C:\ProgramData\Nuance\NaturallySpeaking13\Custom\<language>\New
Words.txt
31
32
Program files
For 32-bit systems
C:\Program
Files\Nuance\NaturallySpeaking13\Program
Help
For 64-bit systems
C:\Program Files (x86)
\Nuance\NaturallySpeaking13\Program
For 32-bit systems
C:\Program
Files\Nuance\NaturallySpeaking13\Help
Interactive Tutorial files
For 32-bit systems
C:\Program
Files\Nuance\NaturallySpeaking13\itutorial
For 64-bit systems
C:\Program Files (x86)
\Nuance\NaturallySpeaking13\Help
For 64-bit systems
C:\Program Files (x86)
\Nuance\NaturallySpeaking13\itutorial
Dragon User Guide
Activating Dragon
The first time you start Dragon, you will be prompted to activate your copy of the program.
If you do not activate the program, you will be able to start Dragon several times. Without activation, when you start Dragon for the sixth time, it will no longer open and you won't be able to use the program until you activate it.
Nuance strongly recommends that you activate automatically.
To automatically activate Dragon
1. Start Dragon. This displays the Activation dialog box.
2. Click "Activate Now." This displays the Activation Screen.
You can also choose "Activate Later," which will prompt you to activate each time you start
Dragon. If you start the program five times without activating, Dragon will be disabled.
3. Click "Activate Automatically." This automatically activates Dragon and requires no further action from you.
To manually activate Dragon
1. Start Dragon. This displays the Activation dialog box.
2. Click "Activate Now." This displays the Activation Screen.
3. Click "Activate Manually." This displays the Enter Key dialog box.
4. To complete the manual activation, click on the URL listed at the top of the dialog box. This
URL opens the Nuance activation page.
5. On the Nuance activation page, click "Generate Activation Key" to create an Activation
Key.
Chapter 2: Installing Dragon
6. Once activation key appears, select the entire number and copy it (CTRL+C). Click the first field of the Enter Key dialog box and paste (CTRL+V). This pastes the entire number into the Activate Key field
7. Click OK to complete the activation.
Notes
n
You must be connected to the Internet to activate Dragon NaturallySpeaking. The activation process sends only your product serial number and a number that uniquely identifies the machine where Dragon is being installed. No personal information is transmitted to Nuance.
n
If you make any hardware changes on a machine where Dragon is installed, you may be prompted to activate again. To preserve your activation status you can uninstall
Dragon, making sure to keep your User Profiles when prompted, before you make your hardware changes. After making changes to your hardware, then re-install
Dragon.
33
Chapter 3: Getting Started
Chapter 3: Getting Started
This section contains the following topics:
Working with Windows 8 and Windows 8.1
Using the Dragon Learning Center
Using the Interactive Tutorial
Using the Command line interface
Auto Configuration Based on System Profile
Contacting Customer Service and Support
Working with Windows 8 and Windows 8.1
With Windows 8, Microsoft introduced major changes for end-users compared to previous operating systems: it added a second interface (known as “Modern” and formerly as
“Metro”) and removed the Start button from the familiar desktop interface. With the release of its free update, Windows 8.1 (October 2013), Microsoft introduced new capabilities (and reintroduced the Start button on the desktop interface).
The Classic DragonBar cannot display on the Modern interface, but Dragon 13 introduces the New DragonBar, which can.
Note: For the latest details on using Dragon in Windows 8, please see the Dragon support page and Knowledgebase on the Nuance website: http://www.nuance.com/support/dragon-naturallyspeaking/index.htm
Starting Dragon from the Windows desktop:
Make sure your microphone is connected, then start Dragon by double-clicking its desktop icon.
35
36
Dragon User Guide
Starting Dragon from the Windows Start Screen:
When using Windows 8, click the Dragon NaturallySpeaking tile to start Dragon. In Windows
8.1, you start Dragon from the Apps View. (You can start Dragon from the Start Screen on
Windows 8.1 If you have a Dragon tile on the Start Screen. By default, the Dragon tile will not be on the Start Screen, and unless you pin it, you will not be able to start it from that screen.
Command and control
n
In Windows 8, there is no Start menu on the desktop interface, but equivalent functionality is provided by the Charms bar and the Start screen. To access those by voice, you can use the commands “open Charms bar” and “open Start screen.” To see the expanded view of the Start screen, you use the command “show all applications.”
(Note: in Windows 8.1 there is a Start button on the desktop).
n
To perform actions in Windows 8, you can also take advantage of Dragon’s ability to
press keys . For example, you can say the commands “press Windows h” (this
accesses Windows 8’s Share feature) and “press Windows key .” n
You can dictate in the Search field. (After entering your search term or terms, you could use the command “press Enter.”) Note that, from the Start screen, dictating does not automatically bring up Search. This is supported in the "All Apps" screen only.
n
The following are commands for Windows 8 and include commands added for Windows 8.1:
Chapter 3: Getting Started
To Say
Windows 8 Commands
Display the Start Screen
Change Account Picture
Go to All Applications
Display the Charms Bar
"start screen"
"Show me start screen"
"Show start screen"
"Open start screen"
"Click start screen"
"Change account picture"
"Change my account picture"
"Switch to all applications"
"Open all applications"
"Show all applications"
"View all applications"
"charms bar"
"Show me charms bar"
"Click charms bar"
Pin an Internet Explorer 10 site to the Start Screen
"Pin this location to start screen"
"Add location to start screen"
"Pin location to start screen"
"Add this location to start screen"
"Add page to the start screen"
"Pin site to start screen"
"Add this page to start screen"
"Add this site to start screen"
"Pin this location to the start screen"
"Pin location to the start screen"
"Pin web page to start screen"
"Add location to the start screen"
"Add this site to the start
37
38
Dragon User Guide
To Say
screen"
"Pin this page to start screen"
Windows 8.1 Commands
Customize the Start
Screen
Pin an Internet Explorer 11 site to
Applications
"Customize start screen"
Display a Charm
"Pin this location to start screen applications"
"Add this web page to applications"
"Pin this web site to apps"
"Go to 'charm name' charm"
"Open 'charm name' charm"
"Show 'charm name' charm"
Charm names: Start |Search | Share |
Devices | Settings
Windows 8 restrictions
n
Dragon’s windows can only open in the desktop environment. Examples of Dragon windows are the Open User Profiles dialog, the Vocabulary Editor, the Accuracy
Center, the list of open windows, and the Edit Keywords window triggered by commands such as “search maps for…”. If, while outside the desktop environment, you perform an action that causes one of these windows to open, that window will be open on the desktop.
n
Dragon’s Results indicator does not appear when you use Dragon outside of the desktop environment.
n
Dragon’s capabilities for Internet Explorer only apply to the desktop environment; they do not apply to the Internet Explorer full-screen app.
n
Dragon does not have Full Text Control in full-screen applications. The Dictation Box is not supported for Metro apps.
About Dragon
Dragon software is the premier product for large-Vocabulary continuous recognition of natural speech. With Dragon, you can create documents quickly and easily with your voice, without being slowed by typing on your keyboard.
Dictate your documents
You can dictate, rather than type, into any program that accepts text. Dragon recognizes natural and continuous speech and converts it to text on the screen.
Chapter 3: Getting Started
Format and edit by voice
You can use voice commands to format text and make corrections and to activate the buttons and menus in supported word processors, such as Corel WordPerfect, Microsoft
Word, DragonPad , WordPad, and other supported programs.
Say What You See™ to control programs
You can use voice commands to start and switch among programs and to control program windows, menus, and dialog boxes. Say "File," for example, to open the File menu.
Personalize Dragon for your voice and Vocabulary
You can train Dragon to recognize the way you speak and personalize the Vocabulary with words you typically use.
n
n
How Dragon works
The goal of Dragon is to make it easier to interact with a computer without using a keyboard or mouse. To succeed at this goal, the program must be able to analyze an incoming stream of sounds and interpret those sounds as commands and dictation. This process of interpretation is called speech recognition, and its success is measured by the percentage of correct interpretations, or recognition accuracy.
To achieve high recognition accuracy, Dragon relies on several sources of information: n
Acoustic model—a mathematical model of the sound patterns used by the speaker's language.
n
Vocabulary—a list of words that the program can recognize. Each word in the
Vocabulary has a text representation and a pronunciation.
n
Language model—statistical information associated with a Vocabulary that describes the likelihood of words and sequences of words occurring in the user's speech.
When you create and train a User Profile, you start with a standard set of models and then customize them for the way you speak (acoustic model) and the way you use words
(Vocabulary and associated language model). When you use Dragon, the program uses your customized User Profile to guess the words that you said.
Why does the program make mistakes?
For various reasons, Dragon does not always type the word you want. Some of the reasons include: n
The correct word was not in the Vocabulary.
n
The word or phrase you spoke sounded very similar to the word or phrase the program typed.
n
The sound of your breath or other random noises were interpreted as small words like
"in" that appeared where they didn't belong.
39
40
Dragon User Guide
There are solutions to these and most of the other errors that the program might make in the
Help topics.
Customizing Dragon
Before you first use Dragon, you provide it with information about your pronunciation. You do this by reading a passage from a prepared text for about five minutes. The program then adds this data to the information it already knows about the way you speak.
As you subsequently use Dragon, you may still encounter occasional misrecognitions, though these misrecognitions will decrease over time. n
If the program misrecognizes a common word, you can correct the misrecognition in a
way that further refines the program's understanding of your pronunciation of specific words or phrases.
n
If the program misrecognizes an uncommon word, such as a technical term or a proper name, you can add that word to the program's Vocabulary so that it will understand the word or term the next time you say it.
You can also tell Dragon something about the frequency with which you use different words when you compose documents and e-mail.
n
A tool called Learn from Specific Documents lets Dragon analyze your documents and therefore enables the program to better recognize your language and writing style.
n
Another tool called the Learn From Sent E-mails
tool can add the names of your e-mail contacts and analyze the language and style of your sent e-mail.
There's more
This is just a short description of how Dragon can help you get more from your computer through speech recognition. As you look through additional topics in the Help, you will learn in greater detail how to better use the power of speech recognition with Dragon.
Activating Dragon
The first time you start Dragon, you will be prompted to activate your copy of the program.
If you do not activate the program, you will be able to start Dragon several times. Without activation, when you start Dragon for the sixth time, it will no longer open and you won't be able to use the program until you activate it.
Nuance strongly recommends that you activate automatically.
To automatically activate Dragon
1. Start Dragon. This displays the Activation dialog box.
2. Click "Activate Now." This displays the Activation Screen.
You can also choose "Activate Later," which will prompt you to activate each time you start
Dragon. If you start the program five times without activating, Dragon will be disabled.
3. Click "Activate Automatically." This automatically activates Dragon and requires no further action from you.
Chapter 3: Getting Started
To manually activate Dragon
1. Start Dragon. This displays the Activation dialog box.
2. Click "Activate Now." This displays the Activation Screen.
3. Click "Activate Manually." This displays the Enter Key dialog box.
4. To complete the manual activation, click on the URL listed at the top of the dialog box.
This URL opens the Nuance activation page.
5. On the Nuance activation page, click "Generate Activation Key" to create an Activation
Key.
6. Once activation key appears, select the entire number and copy it (CTRL+C). Click the first field of the Enter Key dialog box and paste (CTRL+V). This pastes the entire number into the Activate Key field
7. Click OK to complete the activation.
Notes
n
You must be connected to the Internet to activate Dragon NaturallySpeaking. The activation process sends only your product serial number and a number that uniquely identifies the machine where Dragon is being installed. No personal information is transmitted to Nuance.
n
If you make any hardware changes on a machine where Dragon is installed, you may be prompted to activate again. To preserve your activation status you can uninstall
Dragon, making sure to keep your User Profiles when prompted, before you make your hardware changes. After making changes to your hardware, then re-install
Dragon.
Dragon system requirements
The install process checks that your system meets the minimum requirements; if they are not met, Dragon NaturallySpeaking will not be installed.
Note:
Supports Microsoft Office 2010 & 2013. Does not support dictation directly into Electronic
Medical Record (EMR) systems. For EMR support, please use Dragon Medical Edition.
- RAM: Minimum: 2 GB for 32-bit Windows 7, 8 & 8.1. 4 GB for 64-bit Windows 7, 8 & 8.1
and Windows Server 2008 R2, Windows Server 2012.
- CPU: Minimum: 2.2 GHz Intel® dual core or equivalent AMD processor. Faster
processors yield faster performance.
- Free hard disk space: 4GB
- Supported Operating Systems: Windows 7 32-bit and 64-bit; Windows 8 & 8.1, 32-bit and 64-bit; Windows Server 2008 R2; Windows Server 2012.
- Internet Explorer 9 or higher or the current version of Chrome or Firefox for Online Help.
- A sound card supporting 16-bit recording.
- A DVD-ROM drive for installation.
41
42
Dragon User Guide
- A Nuance-approved microphone. See
support.nuance.com/compatibility
for more information.
- An Internet connection for automatic product activation (a quick anonymous process).
Top Ways to use Dragon
If you want to get started quickly, check out the topics listed here. They explain the top things you need to know about common tasks and concepts.
Click a heading to open that topic.
Getting Started
Descriptions of key concepts and components.
Microphones
Requirements and tips for different microphone types.
Dictation
Steps and tips for dictating text.
Tips to maximize dictation accuracy.
Correcting text
Commands for correcting your dictated text.
Revising text
Commands for revising and formatting your dictated text.
Mouse and keyboard
Commands for controlling your mouse and keyboard.
Word Processors
Commands for working in common word processing applications, including Microsoft Word.
Commands for writing and managing e-mail.
User profiles
Creating and managing user profiles.
The Dragon Learning Center
Description of Learning Center features, plus related tips and commands.
Using Dragon Help
In addition to using the Help menu, you can access Help and navigate through topics by hand
(keyboard or mouse) as well as by using voice commands. The following table summarizes
Chapter 3: Getting Started
these commands.
To
Open the Help window
Display topics
Select the Contents,
Index, or Search tab
Move in the Contents,
Index list, Search list, or
Select Topic list
Open a topic from the
Contents, Index list,
Search list, or Select
Topic list
Close the Help window
Highlight a topic in the
Search tab after a search
Say
"Give Me Help"
"Move Forward" or "Go Backward"
Say "Click Contents," "Click Index," or "Click Search"
"Move Down <1 to 20>"
"Move Up <1 to 20>"
Move to the topic or book you want and say "Press Enter." (In the
Index and Search tabs, you can also say "click Display.") You can also dictate an index entry or a search string.
"Close Help" or "Quit Help"
Say "Tab four time" or say "Tab Key" or "Press Tab" four times
Note
Not all voice commands work in the Help window. For example, you can select the tabs by saying "Click Contents," "Click Index," or "Click Search," but you cannot use voice commands to select from the toolbar and you cannot click buttons by saying their name. You can use "Press Tab Key" to select buttons and "Press Enter Key" to press buttons. On the
Search tab of Dragon’s Help window, three checkboxes enable you to search only previous search results, match similar words, and search topic titles only. Open the Help Search tab for details.
Hot keys
Use hot keys to perform the described actions.
The keys listed here are the default settings; you or someone else might have changed the key assignments to different keys.
43
44
Dragon User Guide
To
Turn the microphone on or off
Open the Correction menu
Press
Press + (Plus key) on the numeric keypad
Press -( Minus key) on the numeric keypad
Note: Dragon does not currently support this hot key with Gmail or
Hotmail/Outlook.com.
Press and hold CTRL Force words to be recognized as commands
Force words to be recognized as dictation
Open the Dragon menu
Put the microphone to sleep or wake it up
Press-to-talk
Open the Dictation Box
Move to Next field
Playback
Fast Playback
Press and hold SHIFT
Press * (Asterisk key) on the numeric keypad
Press / (forward slash key) on the numeric keypad
There is no default key for Press-to-talk
Press CTRL + SHIFT + D
Press CTRL + SHIFT + N
Press SHIFT + -Minus key (-) on the numeric keypad
Press SHIFT + * (Asterisk key) on the numeric keypad
Note
You can view or change the current assignments for hot keys on the Options dialog box Hot keys tab .
Using the Dragon Learning Center
Use the Learning Center to see on the side of your screen sample commands and tips related
The Learning Center appears automatically when you open a Profile (you can change this from the Miscellaneous tab of the Options dialog box). If the Learning Center is closed, you can open it through the Help menu or by saying a command such as "What can I say" or
"Show Dragon Learning Center."
You can change the Learning Center's font size, either by voice or through its right-click menu.
By default, the Learning Center is set to Floating; you can resize it and move it. If you prefer to not cover any window under it, you can choose to dock it to the side of the screen, in which case you can also choose to set it to Auto-hide.
Caution: if the area of the desktop below the Learning Center contains icons, docking the
Learning Center will cause those icons to move, which could disrupt your desktop arrangement.
Chapter 3: Getting Started
Controlling the Learning Center
You can use the following voice commands with the Learning Center, whether or not it's the active window (that is to say, whether or not it has focus).
Most commands require that the Learning Center be open.
To open one of Learning Center's panels or tabs, say “click” and its label.
45
46
Dragon User Guide
To
Show the
Learning
Center
Show the
Say this Or do this
"What can I say?"
"Dragon Learning Center" or "Dragon
Sidebar" (you can also precede this with "Open", "Launch", "Start", "Show", or "Show Me")
"Sample Commands" or "Command list" (you can precede this with "Open",
"Launch", "Start", "Show", or "Show
Me")
"Switch to Learning Center"
Select Learning Center from the
DragonBar's Help menu.
"Click My Commands" Select the MyCommands tab on the Learning Center.
Dock the
Learning
Center to the right
Dock the
Learning
Center to the left
"Learning Center dock right"
"Learning Center dock left"
Right-click on the Learning Center and select Dock right.
Right-click on the Learning Center and select Dock left.
Change the font size of the
Learning
Center
"Learning Center Font [Small |
Medium | Large]"
Float the
Learning
Center
"Learning Center float" or
"Learning Center undock"
Auto-hide the
Learning
Center (not available in
Floating)
Disable autohide (not available in
Floating)
"Learning Center auto-hide"
"Learning Center stop hiding"
Right-click on the Learning Center and select Font Size > Small,
Medium or Large.
Right-click on the Learning Center and select Floating.
Right-click on the Learning Center and select Auto-hide.
Right-click on the Learning Center and deselect Auto-hide.
Chapter 3: Getting Started
To
Set the
Learning
Center to
Always on Top
Say this
With the Learning Center active , right-
click it and say "Always on Top"
Turn off Always on Top
With the Learning Center active , right-
click it and say "Always on Top"
Increase the
Learning
Center width by
5 per cent
"Learning Center wider"
Decrease the
Learning
Center width by
5 per cent
"Learning Center thinner"
Print Learning
Center commands
N/A
"Learning Center Help" Show the
Learning
Center Help
Close the
Learning
Center
"Learning Center close" or
"Close window"
Or do this
Right-click on the Learning Center and select Always on Top
Right-click on the Learning Center and deselect Always on Top.
With the Learning Center active ,
press the key combination
<ALT+W>. (You can also click and drag the left border.)
With the Learning Center active ,
press the key combination
<ALT+T>. (You can also click and drag the left border.)
Right-click on the Learning Center and select Print.
Click the question mark icon at the top right of the
Learning Center.
Right-click on the Learning Center and select Close.
Click the x at its top right corner.
Learning Center contexts
Here is the list of programs and windows for which the Learning Center has specific content: n
n
, Spelling window (see
Dragon Help), Command Browser, Vocabulary Editor
n
Microsoft Word ,. Please see the Dragon Help for and Microsoft InfoPath
n
WordPad n
.Corel WordPerfect (see Dragon Help) n
OpenOffice.org Writer (see Dragon Help) n
Internet Explorer, Google Chrome, and Mozilla Firefox
n
Global
If you click in an application for which Dragon does not have specific commands (for example, Notepad, Skype, or iTunes), the Learning Center displays general tips, plus
47
48
Dragon User Guide
commands available at all times (these are called “global commands”) and commands for controlling the Learning Center itself.
Using the Interactive Tutorial
The Interactive Tutorial teaches you, in a simulated environment, skills such as saying
Dictation Commands and punctuation, modifying text, accessing a Web page and clicking buttons by voice. Its lessons are short and introduce important elements such as the
DragonBar, the Learning Center, the Spelling Window, the Options dialog, and the
Vocabulary Editor.
At any time, you can exit the Interactive Tutorial (by clicking the X at the top right corner) and after some practice on your own, return to it: you can access it through the DragonBar’s Help menu.
Note:
In the simulations that contain the punctuation “period” one can use the pronunciation “full stop” instead.
Like the profile creation process, the Interactive Tutorial cannot be used hands-free.
Starting to dictate
Follow these steps when you want to dictate.
To start to dictate
1. Make sure the program you want to dictate into is running.
2. Put on the microphone and position it correctly .
3. Click in the program you want to dictate into to make that window active.
4. Turn on the microphone .
5. Start talking and watch your words appear on the screen.
Using the Command line interface
You can use command line options to modify the way in which Dragon starts up. These switches are used in the following syntax:
natspeak /switch
Where /switch is the switch from the following table:
Chapter 3: Getting Started
Switch Function
/diagnose
/FindCustom
/finddragonlog
/findsetuplog
/findappdataallusers
Runs Dragon in diagnostic mode. Outputs information into the
Dragon.log file and exits.
Brings up the custom directory
Brings up a Windows Explorer window with the dragon.log highlighted
Brings up a Windows Explorer window with the dgnsetup.log highlighted
Brings up a Windows Explorer window in our "all users" application data directory (nssystem.ini, nsapps.ini, models.ini, Users\ directory, etc.)
/findappdata
/findupgradelog
/user <User Profile>
/topic <topic>
/quick
/SetDefaultOptions
Brings up a Windows Explorer window in our "this user" application data directory (dragon.log, upgrade.log, nsuser.ini, etc.)
Brings up a Windows Explorer window with the upgrade.log highlighted
Automatically loads the user specified by <User Profile>
Automatically loads the topic specified by <topic> (Professional,
Legal, and Medical editions only)
Runs Dragon in quick mode. QuickStart mode starts Dragon without loading a User Profile or any speech models when you start your computer. Only the Dragon tray icon is visible. When you click on the Dragon Desktop icon, the Open User Profile dialog box immediately appears. When you exit Dragon the program returns to the QuickStart mode and remains in memory with a reduced footprint (approximately 10 MB).
Displays the Options dialog box at the end of the installation. The
Options dialog box lets you change Dragon’s standard behavior, including specifying hot keys, customizing how text is formatted, initial microphone settings, and setting how often User Profiles are backed up.
/SetDefaultAdministrativeOptions Displays the Administrative settings dialog box at the end of the installation.
/SetDefaultFormattingOptions Brings up the default Formatting options dialog
Auto Configuration Based on System Profile
At installation time, Dragon NaturallySpeaking analyzed your computer’s processor and memory resources and may have disabled some of Dragon's Natural Language commands to optimize performance your system.
You can change these settings to suit your preferences using Dragon’s Options dialog box
(Tools>Options from the New DragonBar or Classic DragonBar). You can change:
49
50
Dragon User Guide
n
Adjusting the “Speed vs. Accuracy” slider to favor speed. For more information, see
Adjusting Speed vs. Accuracy .
n
Deactivating the “Natural Language Commands” for some or all of the following applications: n
Microsoft Word n
Microsoft Excel n
Microsoft PowerPoint n
Corel WordPerfect
“Natural Language Commands” provide alternate ways to perform specific tasks by voice. If they are deactivated, you can still perform all actions by voice although it may take a few extra steps, including navigating menus and dialogs. You can still use commands such as “bold that”, “delete line”, “select all”, “backspace 5”, etc. You can re-enable each of these command sets individually, using the “Natural Language
Commands” button on the Commands tab of the Options dialog. You may wish to do so if speed of response is not your priority. If you re-enable the Microsoft Word set, for instance, Dragon’s speed within Microsoft Word (or Microsoft Outlook using Word as its editor) may decrease.
For more information, see
Enabling Natural Language Commands .
Note
Dragon’s Performance Assistant, available from the Help menu, provides tips and techniques for increasing the speed with which Dragon recognizes what you say.
Contacting Customer Service and Support
Before requesting Support, you may find that shutting down and restarting your computer resolves your issue, or that the information you need is the web (see the Knowledgebase at http://support.nuance.com
). If you have done this and still need support, please read below.
First, collect some information
If you can't find some of the information listed below, a Support agent can help you access it.
Chapter 3: Getting Started
Your product serial number
(the serial is printed on the DVD sleeve and is also on the splashscreen accessible by clicking About NaturallySpeaking in the DragonBar's Help menu)
What you were doing when the problem happened
(for instance: reading text for the Microphone Check, reading a text to train Dragon, dictating in a table in Microsoft Word 2013...)
Any error message text (before requesting support, consider searching the web by inputting the text of the error into a search engine)
Operating system
Processor type and speed
Amount of memory (RAM)
Amount of free hard-disk space
Sound card name and model
Microphone name and model
Program log file (Dragon.log).
To find the Dragon.log, select Start > All Programs > Dragon
NaturallySpeaking13 > Show Dragon Log
Attach the log file if you send e-mail to technical support.
Then, contact Support
51
Dragon User Guide
Chapter 4: Using the New
DragonBar or Classic DragonBar
52
This section contains the following topics:
Displaying the New DragonBar or Classic DragonBar
Working with the New DragonBar or Classic DragonBar
The DragonBar
The DragonBar is the toolbar you use to control the Dragon software. You can choose to use the New DragonBar, which opens by default, or switch to the
Classic DragonBar from previous versions. The DragonBar that you choose to use appears at the top of your screen when you start Dragon for the first time.
You can change the appearance and behavior of the New DragonBar or Classic DragonBar to suit your working style. By default, it is automatically collapsed. To expand it, see
. To change its mode, see Displaying the New Dragon Bar or
The New DragonBar and Classic DragonBar contain the following controls.
Dragon icon
Appears on the Classic DragonBar only. Click the Dragon icon ( ) or right-click anywhere on the Classic DragonBar to display a menu that controls how the Classic DragonBar looks and acts on your screen.
To change how the New DragonBar looks and acts, select an option from the DragonBar menu.
For more information on the options that control the New DragonBar or Classic DragonBar,
see Displaying the New DragonBar or Classic DragonBar.
Grabber bar
Appears on the New DragonBar only. Click and hold the grabber bar ( )to move the New
DragonBar around your screen when it's maximized. It's located to the left of the DragonBar
Chapter 4: Using the New DragonBar or Classic DragonBar
menu.
Minimize/Maximize icons
These appear only on the New DragonBar. Click the Minimize icon ( ) or say "Collapse
DragonBar" to collapse the New DragonBar, or shrink it down to a smaller size. Click the
Maximize icon ( ) or say "Expand DragonBar" to return the New DragonBar to its default size.
By default, the New DragonBar is automatically collapsed. To expand it, move your mouse over it. To keep the New DragonBar at its expanded size, deselect the Auto-collapse option from the DragonBar menu.
Microphone icon
The microphone icon displays on the New DragonBar and Classic DragonBar and in the
Windows taskbar. Click the microphone icon to turn the microphone on and off. The following table shows the microphone states you'll see:
53
54
Dragon User Guide
New
Dragon
Bar
Classic
DragonBar
What you can do
The microphone is on and Dragon is listening.
Dictate or say commands as needed.
When you are finished or want to pause from dictating:
Say "Go to Sleep" or click the forward slash key (/) to put the microphone to sleep.
Say "Microphone Off" or click the plus key (+) to turn off voice recognition.
The microphone is on and Dragon is ready to act on anything you dictate.
The microphone is asleep and Dragon is listening to anything except the commands that wake it up.
When you want to resume dictating:
Say "Wake Up" or click the plus key (+) to resume voice recognition.
The microphone is turned off.
When you want to resume dictating, do one of the following:
Press the plus key (+) on the numeric keypad.
Click the microphone button on the DragonBar.
Click the microphone icon in the Windows taskbar.
No User Profile is loaded and the microphone is off.
To load a User Profile, select the Profile menu on the New
DragonBar or Classic DragonBar.
See Controlling the Microphone in the Dragon Help for more information.
Volume Display
When Dragon hears you well, the volume display on the New DragonBar ( ) or the Classic DragonBar ( ) turns green and expands and contracts as you
Chapter 4: Using the New DragonBar or Classic DragonBar
speak. No color displays when the microphone is turned off or is not responding. The display turns gray when the microphone is asleep.
Text Control Indicator
There is a Text Control Indicator on the New DragonBar ( ) or the Classic DragonBar (
) that changes to indicate whether Dragon currently has Full Text Control. See The Text
Control Indicator for more information.
Recognition Mode Indicator
The Recognition Mode Indicator shows you Dragon's current mode. On the New
DragonBar, you select modes from the Recognition Mode drop-down list. On the Classic
DragonBar, you select modes from the Modes menu. The Recognition Mode Indicator then
changes depending on the recognition mode that you select. The default mode is Normal
mode.
The following table describes the Recognition modes. Click the links for more information on
55
56
Dragon User Guide
Ne w
Dr ag on
Ba r ag on
Ba r
Cl as sic
Dr
Recog nition mode
Description
Dragon's default mode of dictation. In Normal Mode,
Dragon distinguishes dictation from words, numbers, and commands by analyzing what you say between pauses. Say "Start Normal Mode" or "Normal Mode
On."
A restricted recognition mode that causes Dragon to interpret everything you say as dictation and nothing is interpreted as a command. Dictation Mode can be helpful if you want to dictate as quickly as possible, or dictate without looking at the words Dragon transcribes.
Say "Start Dictation Mode" or "Dictation Mode On."
A restricted recognition mode that causes Dragon to interpret everything you say as a command and nothing is interpreted as dictated text. Say "Start Command
Mode" or "Command Mode On."
A restricted recognition mode that causes Dragon to recognize only numbers. If you are dictating only numbers (including currencies), working in this mode increases recognition accuracy. Say "Start Numbers
Mode" or "Numbers Mode On."
A restricted recognition mode that causes Dragon to recognize only letters, numbers, commands, and punctuation. Spell mode is useful for dictating unpronounceable alphanumeric strings, such as part numbers and license plate numbers, and other terms you anticipate Dragon won’t know, such as Web addresses, words in a foreign language, or unusual product names. Say "Start Spell Mode" or "Spell Mode
On." You can still use commands while in Spell Mode.
Message area
The message area shows Dragon's current status, such as whether the microphone is on or off. The following table shows examples of the message area.
Chapter 4: Using the New DragonBar or Classic DragonBar
Classic DragonBar New DragonBar
The Text Control Indicator
The New DragonBar and Classic DragonBar both include a Text Control Indicator to show
whether Dragon has Full Text Control for the selected text field.
Full Text Control includes Dragon applying spacing between words and capitalization at the beginning of sentences, as well as executing commands that quote text from your document
(select <xyz>, correct <xyz>, insert after <xyz>, etc.). This functionality depends on
Dragon’s ability to constantly obtain from the text field information about its content—for instance, where words and sentences begin and end.
The Text Control Indicator is green (as shown) when the cursor is in a field for which Dragon
. Most standard text fields allow Full Text Control.
New DragonBar Classic DragonBar
When Dragon doesn't have Full Text Control, the Indicator turns gray (as shown).
New DragonBar Classic DragonBar
Without Full Text Control, the first word you dictate may not be capitalized, Dragon may not add spacing automatically when you insert a word, and commands that quote words from your text might not work. In these situations, you can say "cap" before the word you want capitalized, and you can say "space" when you want a space inserted. You also might want to use the keyboard and mouse to perform edits and corrections. Alternatively, you might
want to use the Dictation Box .
For more information
For more information, see: n
57
58
Dragon User Guide
Displaying the New DragonBar or Classic DragonBar
There are different ways to display the New DragonBar and the Classic DragonBar. The options are different for each DragonBar.
The New DragonBar
To open the New DragonBar
1. On the Classic DragonBar, click the Dragon icon .
2. Select New DragonBar. The Classic DragonBar closes, and the New DragonBar opens.
To open a menu
1. Say "Switch to DragonBar" to make the New DragonBar active.
2. Say the name of the menu and menu item that you want to open.
For example, say "Switch to DragonBar" then "Tools" then "Auto-Formatting Options."
To change the display mode
1. Say "Switch to DragonBar" to make the New DragonBar active.
2. Say "DragonBar" then the mode that you want:
Classic DragonBar
The New DragonBar closes, and the Classic DragonBar opens.
Tray Icon only
The New DragonBar is not visible on the screen. Only the microphone icon in the Windows system tray indicates that Dragon is running.
Auto-collapse
The New DragonBar shrinks to a smaller size automatically when you move the cursor away from it. This feature is helpful when you find that the New DragonBar covers too much of your active application. This option is selected by default.
To collapse the New DragonBar
Click the Minimize icon ( ), or say "Collapse DragonBar". Collapsing the New DragonBar shrinks it down to a smaller size, taking up less space on your screen.
To expand the New DragonBar
Click the Maximize icon ( ), or say "Expand DragonBar". Expanding the New DragonBar reverts it to its normal size.
Chapter 4: Using the New DragonBar or Classic DragonBar
The Classic DragonBar
To open the Classic DragonBar
1. Say "Switch to DragonBar" to make the New DragonBar active.
2. Say "DragonBar" then "Classic DragonBar". The Classic DragonBar opens.
To open a menu
1. Say "Switch to DragonBar" to make the Classic DragonBar active.
2. Say the name of the menu and menu item that you want to open.
For example, say "Switch to DragonBar" then "Tools" then "Auto-Formatting Options."
To change the display mode
1. Click the Dragon icon on the left side of the DragonBar or right-click anywhere on the
DragonBar to open the DragonBar shortcut menu.
2. Select the mode you want:
DragonBar Docked to Top
The DragonBar always stays at the top of the screen. This is the mode in which the DragonBar appears the first time you start Dragon.
DragonBar Docked to Bottom
The DragonBar always stays at the bottom of the screen. If the Windows taskbar is visible at the bottom of the screen, the DragonBar appears just above it.
Floating DragonBar
The DragonBar appears in a window you can drag around the screen.
Clinging DragonBar
The DragonBar "clings" to the top left of the active window. When you drag the active window to a new location on your screen, the DragonBar moves with it.
New DragonBar
The Classic DragonBar closes, and the New DragonBar opens.
Tray Icon Only
The DragonBar is not visible on the screen. Only the microphone icon in the
Windows system tray indicates that Dragon is running.
Always on Top
By default, Dragon always appears "on top," meaning it is in the foreground of your computer display. For the Floating DragonBar, you can change the setting
59
60
Dragon User Guide
so that the DragonBar drops into the background like other window when you maximize or open a new window large enough to hide the current one.
Note
When you set the DragonBar to "Always on Top" it covers parts of other Dragon windows, such as the DragonPad and Help screens. If necessary, you can turn off "Always on Top" or move the windows around so that they are not obscured.
To return to the last DragonBar mode, right-click on the microphone icon and click Restore Previous DragonBar Mode.
These commands toggle the state of the Floating DragonBar. In other words, if you use a command to turn off the Always On Top setting, and you then say the command again, the DragonBar reverts to Always On Top.
1. Click the Dragon icon on the left side of the DragonBar or right-click anywhere on the DragonBar to open the DragonBar shortcut menu.
2. Do any of the following: n
Say "Set DragonBar to Always On Top" or "Make DragonBar Always on
Top." n
On the DragonBar shortcut menu, select Always on Top.
To switch between displays
You can say "Switch To," "Change To," or "Select" and the name of the mode. For example, if the DragonBar is set to Docked to Top, you could say "Switch To Docked to Bottom" or
"Change To Floating DragonBar" and so on.
Working with the New DragonBar or Classic DragonBar
You can use the New DragonBar or Classic DragonBar and get help with Dragon using the following voice commands:
Chapter 4: Using the New DragonBar or Classic DragonBar
To
Select a New
DragonBar or
Classic DragonBar menu item
Say
1. "Switch to DragonBar" to make the New DragonBar or Classic
DragonBar active.
2. The name of the menu you want to open.
"Start DragonPad" Start the
DragonPad word processor
Display Dragon
Help
"Give Me Help"
Display common voice commands for your current program, window, or text field
"What Can I Say"
Switch the
DragonBar mode
"Switch DragonBar To" or "Select DragonBar" and the mode name
("Floating Mode," "Docked to Top Mode," "Docked to Bottom Mode,"
"Cling Mode," or "Tray Icon Only Mode")
Expand or collapse the New
DragonBar
Display the New
DragonBar or
Classic DragonBar when it is in Tray
Icon only mode
"Expand DragonBar"
"Collapse DragonBar"
"Open Dragon’s tray menu”
Change the Classic
DragonBar Always on Top setting
"Set DragonBar to Always On Top" or "Make DragonBar Always on
Top"
These commands toggle the state of the Classic DragonBar. In other words, if you use one of these commands to make the Classic
DragonBar appear always on top and you then say the command again, the Classic DragonBar will be put into a state where it can be covered by other windows.
Note: When you set the Classic DragonBar to "Always on top" it will cover secondary Dragon windows, such as the DragonPad and Help screens. In these cases, you will have to turn off the "Always on top" state or move the windows around so that they are not obscured.
61
62
To
Exit Dragon
Dragon User Guide
Say
1. "Exit Dragon"
If you also have your User Profile open and have made corrections, performed acoustic training, changed an option, or made modifications in the Vocabulary Editor, Dragon asks if you want to save the changes.
2. Say "Yes" to save the changes.
You can use the "Exit Dragon" command from: n
The Classic DragonBar Control menu (click the Dragon icon at the left).
n
The Classic DragonBar Profile menu.
n
The New DragonBar DragonBar menu.
<right header here> | 64
Chapter 5: Using the Microphone
This section contains the following topics:
Position your microphone properly
Choose an audio device
Use this screen to tell Dragon what type of speech device you'll be using. (If you later wish to use another device, you'll be able to to your profile.)
Use the top section to choose the audio device you want to use now. Dragon will indicate in this list the audio device that it thinks is the most likely.
Notes
n
If you switch between microphones you must rerun the audio check.
Position your microphone properly
Use this screen to help you position your microphone for optimal speech recognition. Positioning the microphone correctly is one of the most important things you can do to enhance recognition accuracy.
If the microphone moves even slightly away from the optimal position, your recognition accuracy may significantly deteriorate.
Use the pictures and descriptions on the wizard screen and in this topic as guides for microphone positioning.
To position a headset microphone
n
Adjust the headset so that it fits comfortably.
n
Move the microphone element to the side of your mouth to avoid noise from breathing.
n
Make sure that the microphone element is close to your mouth, but not touching it (about an inch from the side of your mouth).
n
Confirm that the front of the microphone points toward your mouth. The front may be indicated by a colored dot, the word "Talk," or some other label.
n
Position the headset consistently every time you use it.
65 | Dragon User Guide
To position a handheld microphone
n
Point the microphone element to the side of or below your mouth to avoid noise from breathing.
Do not hold the microphone directly in front of your mouth.
n
Hold the microphone in a comfortable position. Make sure not to hold it in an awkward, tiring position.
n
Make sure that the microphone element is about 1 to 3 inches away from your mouth. You should keep the microphone distance in this range, but you don't have to always keep the microphone at exactly the same distance.
n
Hold the microphone so that the front points toward your mouth. Don't talk into the side of the microphone.
n
Hold the microphone consistently every time you use it. Be careful not to move the microphone or your head suddenly.
n
Do not use a microphone stand or holder because it will be harder to keep a consistent position and the stand may conduct noise.
Dragon User Guide
Chapter 6: Using the Dragon
Learning Center
66
This section contains the following topics:
Using the Dragon Learning Center
Using the Dragon Learning Center
Use the Learning Center to see on the side of your screen sample commands and tips related
The Learning Center appears automatically when you open a Profile (you can change this from the Miscellaneous tab of the Options dialog box). If the Learning Center is closed, you can open it through the Help menu or by saying a command such as "What can I say" or
"Show Dragon Learning Center."
You can change the Learning Center's font size, either by voice or through its right-click menu.
By default, the Learning Center is set to Floating; you can resize it and move it. If you prefer to not cover any window under it, you can choose to dock it to the side of the screen, in which case you can also choose to set it to Auto-hide.
Caution: if the area of the desktop below the Learning Center contains icons, docking the
Learning Center will cause those icons to move, which could disrupt your desktop arrangement.
Controlling the Learning Center
You can use the following voice commands with the Learning Center, whether or not it's the active window (that is to say, whether or not it has focus).
Most commands require that the Learning Center be open.
To open one of Learning Center's panels or tabs, say “click” and its label.
Chapter 6: Using the Dragon Learning Center
To
Show the
Learning
Center
Say this Or do this
"What can I say?"
"Dragon Learning Center" or "Dragon
Sidebar" (you can also precede this with "Open", "Launch", "Start", "Show", or "Show Me")
"Sample Commands" or "Command list" (you can precede this with "Open",
"Launch", "Start", "Show", or "Show
Me")
"Switch to Learning Center"
Select Learning Center from the
DragonBar's Help menu.
Select the MyCommands tab on the Learning Center.
Show the
"Click My Commands"
"Learning Center dock right" Dock the
Learning
Center to the right
Dock the
Learning
Center to the left
"Learning Center dock left"
Right-click on the Learning Center and select Dock right.
Right-click on the Learning Center and select Dock left.
Right-click on the Learning Center and select Font Size > Small,
Medium or Large.
Change the font size of the
Learning
Center
"Learning Center Font [Small |
Medium | Large]"
Float the
Learning
Center
"Learning Center float" or
"Learning Center undock"
Auto-hide the
Learning
Center (not available in
Floating)
Disable autohide (not available in
Floating)
"Learning Center auto-hide"
"Learning Center stop hiding"
Right-click on the Learning Center and select Floating.
Right-click on the Learning Center and select Auto-hide.
Right-click on the Learning Center and deselect Auto-hide.
67
68
Dragon User Guide
To
Set the
Learning
Center to
Always on Top
Say this
With the Learning Center active , right-
click it and say "Always on Top"
Turn off Always on Top
With the Learning Center active , right-
click it and say "Always on Top"
Increase the
Learning
Center width by
5 per cent
"Learning Center wider"
Decrease the
Learning
Center width by
5 per cent
"Learning Center thinner"
Print Learning
Center commands
N/A
"Learning Center Help" Show the
Learning
Center Help
Close the
Learning
Center
"Learning Center close" or
"Close window"
Or do this
Right-click on the Learning Center and select Always on Top
Right-click on the Learning Center and deselect Always on Top.
With the Learning Center active
, press the key combination
<ALT+W>. (You can also click and drag the left border.)
With the Learning Center active
, press the key combination
<ALT+T>. (You can also click and drag the left border.)
Right-click on the Learning Center and select Print.
Click the question mark icon at the top right of the
Learning Center.
Right-click on the Learning
Center and select Close.
Click the x at its top right corner.
Learning Center contexts
Here is the list of programs and windows for which the Learning Center has specific content: n
n
, Spelling window (see
Dragon Help), Command Browser, Vocabulary Editor
n
Microsoft Word ,. Please see the Dragon Help for and Microsoft InfoPath
n
WordPad n
.Corel WordPerfect (see Dragon Help) n
OpenOffice.org Writer (see Dragon Help) n
Internet Explorer, Google Chrome, and Mozilla Firefox
n
Global
If you click in an application for which Dragon does not have specific commands (for example,
Notepad, Skype, or iTunes), the Learning Center displays general tips, plus commands
Chapter 6: Using the Dragon Learning Center
available at all times (these are called “global commands”) and commands for controlling the
Learning Center itself.
The Dragon Learning Center
You can use the Learning Center to see advice and commands related to your active application. The contents of the Learning Center change when the focus changes to another window. For instance, if you click on the DragonBar, the Learning Center will show content relevant to the DragonBar, and if you click in Internet Explorer, the Learning Center will
show content relevant to Internet Explorer. See Learning Center contexts
.
The Learning Center has two tabs. The first tab displays an accordion system of expandable panels containing commands and advice (its top panel is open by default and contains essential advice). The second tab, labeled MyCommands, is for custom commands (if available in your edition of Dragon).
To open each panel in the Learning Center, say “click” and its label. Similarly, to click a tab, say "click" followed by its label.
69
70
Dragon User Guide
Chapter 6: Using the Dragon Learning Center
Note
If you dock the Learning Center, the icons on the desktop may move, which could disrupt your desktop arrangement.
71
Chapter 7: Dictating Text
Chapter 7: Dictating Text
This section contains the following topics:
Correcting text errors as you dictate
Dictation Basics
Dictate to Dragon much as you would dictate to a person transcribing your dictation. By default you must explicitly say most punctuation and capitalization other than for proper names or at the beginning of a sentence. You can have Dragon automatically insert commas and periods in most situations by selecting the "Automatically add commas and periods" box on the Auto-formatting dialog box. For more information, see Dictating punctuation and symbols and Dictation commands .
Click here for Dragon's Top 5s: "Dictation"
The following table describes some basic dictation commands.
To start dictating, just say whatever you want to say, speaking normally in phrases. Then:
To
Start a new paragraph (press the Enter key twice)
Start a new line (press the Enter key once)
Enter punctuation marks, such as "!"
Dictate symbols or special characters such as "®"
Complete listing of dictation commands
Say
"New Paragraph"
"New Line"
The name of the punctuation mark, such as
"exclamation point"
The standard name of the symbol, such as "registered sign"
72
73
Dragon User Guide
Click on the following links for more information about common dictation tasks:
Dictating e-mail and Web addresses
Working in Programs on page 131
In the Dragon Help, see:
Dictating in programs
Dictating punctuation and symbols
Dictating proper and place names
Dictating hyphenated and compound words
Dictating acronyms and abbreviations
Dictating a bulleted list
Replacing what you last dictated
Undoing actions
You can reverse the result of a command or dictation in the following ways:
To undo most actions
Say "Undo That," "Undo Last Action," or just "Undo."
Example:
To undo the command "Italicize That," say "Undo That."
To undo dictation
Say "Scratch That."
Example:
To remove text just after you dictated it, say "Scratch That."
Notes
n
You can cancel a selection by saying "Unselect That," selecting different text, or moving the insertion point to another part of the document.
n
The "Undo That" and "Undo Last Action" commands send an undo (CTRL+z) command to the active program. The result of the command depends on which program is active and how it handles the undo command. For example, if you say
"Undo That" twice in a row in the DragonPad window, the second Undo reverses the first command and restores the original dictation. Other programs may behave differently.
n
The Accuracy Center provides a central location for taking advantage of all the Dragon
tools available to ensure excellent recognition. For more information, see Using the
Chapter 7: Dictating Text
Correcting text errors as you dictate
Use the procedures in this topic if you notice that Dragon misrecognizes a word or words while you are dictating. When you correct errors, Dragon learns not to make the same mistakes again.
To correct a word or phrase with the Correction menu
1. Say "Select <text>," where text is the incorrect word or phrase. If the error is in the last thing you said, you can just say "Select That." (Also see Tips for selecting text ). Dragon highlights the word or phrase, and the Correction menu appears.
2. If the correct word or phrase is on the list, start spelling to choose it, or say "Choose" and the number of that choice. For example, say "Choose 2." Do not say "Choose Numeral
Two" or Dragon will transcribe the phrase as the text "Choose Numeral Two" or "Choose
2" depending on how you set the number formatting options on the Auto-formatting dialog box.
3. If the word or phrase you want is not on the list, spell the word, or say "Spell That" and spell the word letter by letter.
Dragon's Smart Format Rules box may appear when you correct auto-formatted alphanumeric text using the Correction command, the Spelling window, or the keyboard.
For details, see Using Smart Format Rules
and Setting Auto-Formatting Options .
The Spelling window appears. You can use this dialog box to spell or type the correct word.
Notes
n
Dragon also learns from your typing – if you use the keyboard to correct a misrecognized word, Dragon learns from the correction and can use the word the next time you dictate it.
n
The Accuracy Center provides a central location for taking advantage of all the
Dragon tools available to ensure excellent recognition. For more information, see
n
The Correction tab of the Options dialog box lets you control the behavior of the
Correction menu, including the commands that make it appear.
n
If you would rather not see the Correction menu every time you select text, you can turn it off. On the Correction tab of the Options dialog box, clear the box that says
"'Select' commands bring up Correction menu." Then click Apply.
n
If you want to open the Spelling window when you start to correct a word or phrase, select "Correct commands bring up Spelling window" on the Correction tab of the
Options dialog box.
n
If you select a phrase to correct that includes punctuation added to the sentence automatically, the list of corrections that appears in the Correction menu will include a version without the automatically inserted punctuation.
n
In some applications, you may have difficulty revising selected text. In this case, you
may need to use the Dictation Box
. Just select the text you want to revise and say
"Show Dictation Box" or "Edit Selection."
74
75
Dragon User Guide
Dictation commands
When you are dictating, you can say the following dictation commands – also referred to as
"in-line" commands – without pausing.
All the dictation commands and their pronunciation can be seen in the Vocabulary Editor.
Say
To
"new line"
"new paragraph"
Press the Enter key once
Press the Enter key twice, capitalize next word.
Type <word> with an initial capital "cap <word>" or
"cap next <word>"
"caps on"
"caps off"
"all caps <word>"
"all caps on"
"all caps off"
"no caps <word>"
"no caps on"
Start typing words with initial capitals
Stop typing words with initial capitals
Type <word> in all uppercase
Start typing words in all uppercase
Stop typing words in all uppercase
Type <word> in all lowercase
Start typing words in all lowercase
"no caps off" Stop typing words in all lowercase
"no space <word>" Do not put a space before <word>
"no space on"
"no space off"
Stop putting spaces between words
Start putting spaces between words
"numeral"
"Roman numeral"
Enter the next numbers stated as Arabic numerals (1,2,3 ...)
Enter the next numbers stated as Roman numerals (i, ii, iii ...)
Notes
n
When you are in Dictation mode , Dragon interprets everything you say as dictation and
only Dictation Commands are recognized. Dictation Mode can be helpful if you want to dictate as quickly as possible, or dictate without looking at the words Dragon transcribes. Say "Start Dictation Mode" or "Dictation Mode On." n
Dragon can confuse the command for capitalization (cap) with the word cap. In order to dictate the word "cap", as in "I bought myself a new baseball cap.", you must first delete the dictation command “cap” with the Vocabulary Editor.
To do this, open the Vocabulary Editor from the Vocabulary menu of the New
DragonBar or Classic DragonBar, then select the "Words with spoken form only" in the
Chapter 7: Dictating Text
"Display" drop-down menu and choose the spoken form for "cap" then click "Delete", and click "Close."
Now try dictating "baseball cap" and you will see that Dragon recognizes both words and displays them properly.
n
The capitalization and spacing modes are automatically canceled if you move around your document.
n
If you move the cursor (insertion point) by mouse or keyboard, or change windows, the next word you say will not be capitalized. You may need to capitalize the word manually and insert a space.
n
You can enable or disable some Dragon's capitalization commands by setting the
"Caps Lock key overrides capitalization commands" option in the Auto-formatting dialog box.
Typing or spelling text
In the Spelling window, you can use the keyboard to enter words as well as say the letters of the words. You can spell continuously or you can pause between letters. As you type or say each letter, the list of alternatives changes. If the text you want appears before you finish, you can simply choose it.
To type or spell text
1. Type or say the letters of the word(s).
2. If the text you want appears in the list, choose it. For example, say "Choose 2."
3. If necessary, type or spell the word(s) completely.
4. Say "Click OK."
The Spelling window closes and the text is entered in your document. If you had selected text to correct, the new text now replaces the old text.
Note
The "Undo That" command is not available in the Spelling window. If you need to correct a dictation error by voice while you are using the Spelling window, you may use the “Scratch
That,” “Backspace,” or “Delete” commands.
76
77
Dragon User Guide
Voice commands that work in the Spelling window
Command
Choose <1-9>
Result
Chooses a number from the list of alternative spellings
Select <1-9>
Edit <1-9>
Or
Modify <1-9>
Select last/next
<number> characters
Move right/left
<number> characters
Select That
Selects a line from the list of choices in the Spelling window and puts it in the edit box. You can then change the text either by voice or typing.
Selects the specified number of characters
Moves the text insertion point
Delete/Scratch
That
Go To
End/Beginning of
Line
Selects the last utterance (word or letter), or the whole line of text if there has been no previous selection
Deletes the selected text, or the whole line of text if there has been no previous selection
Moves the text insertion point
Notes
n
Typing letters into the Spelling window searches Dragon's Vocabulary for a matching word. If you must type the full word, it is because it is not in the active Vocabulary or the backup dictionary. When you save a User Profile, any words you add in the Spelling window are added as new words to the active Vocabulary.
n
If one of the recognition alternatives is nearly correct, you can say "Select" and the number of the alternative. The alternative text appears in the text box where you can edit it.
n
The voice command "Delete Next/Previous Word" does not work in the Spelling window.
Spelling words
If a word or phrase is not currently in Dragon's Vocabulary, you can spell it in the Spelling window, and add it to Dragon's Vocabulary. Words you spell directly into the document, while the Spelling window is closed, are not added to the Vocabulary. In addition, you can teach (or
"train") Dragon to recognize how you pronounce the word or phrase you spell.
Chapter 7: Dictating Text
In some cases, you may not know that a word is not in the active Vocabulary until Dragon fails to recognize it correctly. Whether you are spelling a word as part of your dictation or correcting a misrecognition, the process is the same.
To spell a word or phrase
When you want to add a new word to the Vocabulary, say "Spell" or "Spell That"
(immediately after a recognition error) and the characters of the word or words you want to spell. Say the characters continuously and quickly, not one at a time.
Note
The "Undo That" command is not available in the Spelling window. If you need to correct a dictation error by voice while you are using the Spelling window, you may use the “Scratch
That,” “Backspace,” or “Delete” commands.
For a list of the characters you can spell with the "Spell" or "Spell That" commands, see
Spelling characters.
If you use the "Spell That" command, saying the characters immediately is optional; you can simply wait for the Spelling window, to open before you begin spelling. Spelling words while the Spelling window is open allows you to confirm that the word is correct before it appears in your document and allows you to train the pronunciation of the word. For information on training a word that you have spelled, see the topic Training words from the Spelling window.
For previously dictated text, select the word or words you want to correct, then say "Spell
That" followed immediately by letters.
Notes
n
Normally, the Spelling window, does not appear when you use the "Spell" command.
You can make it appear by selecting the "Spell commands bring up Spelling window" option on the Correction tab of the Options dialog box.
n
While you are spelling words, you must say "cap" before each character you want to capitalize. Pause briefly after saying the capital letter and before you say the next letter.
n
You can say "Double" before any alphabetic character to enter two of the same characters. For example, say "Double a" to enter "aa." You can also say "Double
Zulu" to enter "zz." You cannot, however, say "Double u" to get two "u" characters
(and not "w"). In this case, you can say "Double Letter u." n
You cannot say the normal forms of letters (for example "A") and their alpha-bravo forms (for example "Zulu") together in a single breath ("A Zulu"). You can mix them if you pause before you change the spelling format.
n
In version 13.x, within normal dictation, Dragon no longer recognizes its built-in alternate pronunciations of letters (alpha, bravo, Charlie, delta, etc. which some people call “military alphabet” or “phonetic alphabet”) -- therefore, saying “bravo
Charlie” will be transcribed as “bravo Charlie.” To avoid ambiguity with the corresponding words, these letter pronunciations are reserved for spelling out: this
means when one is in the Spelling Window
, and when giving a
Spell command – for example, the command “spell space Charlie alpha papa”. n
You can say nearly any character of the standard Windows character set. See the
See Also below for a full list of the characters you can say.
78
79
Dragon User Guide
n
If you are planning to do a large amount of spelling in a document, consider turning
Spell Mode on (say "Spell Mode" or click Modes > Spell Mode). In Spell Mode, Dragon tries to interpret everything you dictate as letters.
Dictating numbers
In most cases you can dictate numbers, including postal codes, as you normally say them. If you want to dictate only numbers, as, for example, when dictating in a spreadsheet program, you can turn on Numbers mode.
To enter
4
23
179
5423
5.423
142,015
127,400,042
127 billion
0.03
2 3/4
11/32
565-5000
781-565-5000
$45
$99.50
€1.7 billion
8:30 p.m.
200 kg
50 meters
May 15, 2003
MMIV iii (lowercase
Roman)
Chapter 7: Dictating Text
Say
"four" or "numeral four"
"twenty three"
"one hundred seventy nine", "one hundred and seventy nine," or "one seventy nine"
"five thousand four hundred twenty three"
"five point four twenty three"
"one hundred forty two thousand and fifteen"
"one hundred twenty seven million four-hundred thousand forty-two"
"one hundred twenty seven billion"
"zero point zero three" or "oh point oh three"
"two and three fourths"
"eleven over thirty two"
"five six five five thousand"
"seven eight one five six five five thousand"
"forty five dollars"
"ninety nine dollars and fifty cents"
"One point seven billion Euros"
"eight thirty pm"
"200 kilograms"
"50 meters"
"May fifteen comma two thousand three"
Note: Saying "comma" is optional.
"Roman numeral two thousand four"
"Roman numeral three" "no caps that"
80
81
Dragon User Guide
To enter Say
Boston, MA 02460 "Boston Massachusetts 02460"
Oakland, CA
99077
"Oakland California 99077"
Notes
n
Most of these examples only work as shown when the appropriate number formatting options are selected on the Auto-formatting dialog box.
n
If you want a comma in a four-digit number, you must speak it explicitly. Numbers with five or more digits automatically include commas.
n
To force recognition of digits as numerals instead of text without using the Numbers
Mode, say "Numeral" before you say the digit, for example, say "Numeral Three" to get
3.
n
You can use or omit the word "and" as part of a number. For example, say "one hundred fifty" instead of "one hundred and fifty" to get the number 150.
n
You can use "oh" and "zero" interchangeably to get 0.
n
The way Dragon formats the currency symbol, the thousand separator, the decimal separator, the negative symbol, and the time separator depends on the configuration of the Regional Settings (or on some versions of Windows, Regional Options) in the
Windows Control Panel. For these numbers to be formatted according to the conventions of the language you are dictating, you must make sure that the Windows
Regional Settings match the language.
n
You can set the currency symbol and format that Dragon uses by selecting the "ISO currency codes" option on the Auto-formatting dialog box. Dragon then uses the currency character and format specified on the Regional Options tab of the Regional and Languages Options tool in your Windows Control Panel. If you are using the
Classic Start menu, you can open your Windows Control Panel by clicking Start on the
Windows Taskbar, pointing to Settings, and then clicking Control Panel.
n
You can change the way Dragon formats numbers on the Auto-formatting dialog box by turning on or off the different formatting options available on the tab.
n
You can change the way Dragon formats Canadian and UK postal codes on the Autoformatting dialog box by turning on or off the "Street addresses" option. For example, with the option on, format a postal code in London by saying "London Comma W Two
Four R J" to enter London, W2 4RJ; and format a postal code in Toronto by saying
"Toronto Comma Ontario M Five H Two L Two" to enter Toronto, Ontario M5H 2L2.
You must reload your User Profile before a change to postal code formatting will take effect. To reload a User Profile, click Open User Profile on the Profile menu to open the
Open User Profile dialog box. Make sure the correct User Profile is selected (the current User Profile is selected by default), and click Open.
n
Dragon can auto-format text and numbers using standard writing conventions or apply
Word Properties to words as you dictate. For information about these settings, see
Auto-formatting dialog box and The Word Properties dialog box.
n
Dragon's Smart Format Rules appear when you correct auto-formatted alphanumeric
text or Word Properties using the Correction menu, the Spelling window, or the
Chapter 7: Dictating Text
keyboard. For details, see Using Smart Format Rules
82
Dragon User Guide
Chapter 8: Using the Dictation
Box
83
This section contains the following topics:
Using the Dictation Box
Normally you can dictate and use Dragon voice commands in any text window of any application. However, you may occasionally find an application or a specific window in an application where you cannot dictate and/or where some voice commands won’t work or
Using Dictation Box in unsupported applications
The Dictation Box opens automatically if Dragon notices that you are trying to dictate in an unsupported application or window within an unsupported application.
Turning off the Dictation Box
If you don't want Dragon to display the Dictation Box in unsupported applications
1. On the DragonBar, select Tools > Options > Miscellaneous.
2. Click or say "Use the Dictation Box for Unsupported Applications" to clear the checkmark from the box.
3. Click OK to apply your changes to the current session. When you save your user profile
, the settings will be saved for future dictation sessions.
Unsupported applications
Some examples of unsupported applications would be presentation or page layout or graphics design software like Adobe Photoshop. Here are some examples of known issues in unsupported applications: n
Dictating into a complex Lotus Notes document sometimes makes Dragon hang or exhibit other abnormal behavior.
Chapter 8: Using the Dictation Box
n
Some Microsoft Outlook users may find that the Full Text Control editing capability does not always work.
n
Some applications, such as Netscape, are not supported for Full Text Control editing at all.
Transferring your text
The Dictation Box can transfer text in plain or Rich Text Format (RTF). For more information on using fonts in the Dictation Box, refer to Using Fonts in Dictation Box in the Dragon Help.
Note: You cannot transfer the audio that corresponds to the text from the Dictation Box to another application. The audio is available only while the Dictation Box is open and only before you dictate the voice command.
The Full Text Control Indicator
The Dragon bar includes a Full Text Control indicator that turns green when you are in an application or window where all of Dragon’s functionality is supported.
When you are in an unknown text field, the Full Text Control indicator goes out, indicating that you may have some difficulty selecting and editing dictated text. Also, when you start dictating into an unknown text field, the Dragon Bar will display a message saying "Unknown text field; consider using 'show Dictation Box' - See Help.'"
The commands that quote text from the screen (select <xyz>, correct <xyz>, insert after
<xyz>…) work thanks to a functionality called Full Text Control. This functionality depends on Dragon’s ability to constantly obtain information from the text field about its content—for instance, in order to know where words and sentences begin and end, so Dragon can apply spacing between words and capitalization at the beginning of sentences. Most standard text fields allow full Full Text Control capabilities.
If you have difficulty in dictating or correcting in one of these unknown text fields, use the
Dictation Box.
For more information, see The Full Text Control Indicator
.
Dictating in unknown text fields
1. Place you cursor where you want to put the text
2. Start the Dictation Box in one of several ways: n
Say "Show Dictation Box" n
Select Tools > Dictation Box from the Dragon Bar n
Use CTRL + SHIFT + D. To change the default hot key(see the Dragon Options dialog box.
3. When the Dictation Box displays, you can dictate and edit text inside the Dictation Box using all of Dragon's commands.
Editing text in unknown text fields
To edit text already in the unknown text field:
1. Select the text in the unknown text field using voice commands or your keyboard and mouse.
2. Copy the text to the Dictation Box for editing in one of these ways:
84
85
Dragon User Guide
n
Say "Show Dictation Box" n
Select Tools > Dictation Box from the Dragon Bar n
Use CTRL + SHIFT + D. To change the default hot key, see The Options dialog box.
3. The selected text displays in the Dictation Box.
Unexpected behavior or text in the Dictation Box
Sometimes the Dictation Box misunderstands the context of what you're working on and it displays text you didn't dictate, and that you can't edit. This can happen when the focus of the application you're using is on a field you can't edit and: n you intentionally open the Dictation Box, or n you speak into your microphone, prompting the Dictation box to open automatically
For example, if you have your e-mail application open with an item in your message list selected, the Dictation Box may display the header text of that message.
If this happens, just go to the Dictation Box and say or click "Cancel" to close it.
Dictation Box Settings
You open the Dictation Box by selecting Tools > Dictation Box on the New DragonBar or
Classic DragonBar.
When you are in Anchored mode, you can define your settings from the Dictation Box
Settings window, where you can configure how the Dictation Box copies text from and pastes text into each application where you plan to use the Dictation Box. For example, you can have different copy and paste settings for Microsoft PowerPoint and Corel WordPerfect.
To open the Settings dialog box, click the Settings button inside the Dictation Box.
Note: If you are not in Anchored mode, you won't see the Settings button. Instead, you can configure the Dictation Box by selecting Tools > Options and then going to the Dictation Box tab.
Note: You can have multiple Dictation Boxes open at one time and can have different settings for using the Dictation Box with each application you use.
Font
The Font setting lets you change the font used for the contents of the Dictation Box. To change the font:
1. Click "Change Font..."
2. Set the font, style, and size under Font, Font style, and Size.
3. Under Effects, you can choose a color from the drop-down list and/or choose Strikeout or
Underline.
4. Click OK to save the font change.
Notes: n
To set the font to the default, click "Default Font" and the font type and size change to
Arial 10-point.
Chapter 8: Using the Dictation Box
n
When you copy text into the text box, it displays in the same font as the originating application.
Window Position
You can define where the Dictation Box appears: n
Anchor: Select this if you want the Dictation Box to appear at the location where it was last closed. If you drag the Dictation Box to a new location and then close it, it will display at that location when you restart the Dictation Box.
n
Automatically position the Dictation Box near the cursor: This option causes the Dictation Box to appear as close to the cursor location as is practical.
Settings for application <application name>
You can define how the Dictation Box copies and pastes text in each application where it's used. For example, you can have different copy and paste settings for Microsoft PowerPoint and Corel WordPerfect.
The Dictation Box works for all applications that can accept standard keyboard shortcuts for
Windows Clipboard operations. In some applications that do not accept these commands, your text may be lost or changed when you transfer text in and out of the Dictation Box.
The Copy options define what kind of copied text the Dictation Box can receive from an application.
Test your application before you start and, if you lose text when you try to transfer text to the application, try different selections under the Copy and Paste options, detailed below:
Copy
n
Do not copy: Does not copy any text from the application when the Dictation Box is started. n
Type keys <Ctrl+C>: Uses Ctrl+C to copy text from the application.
Paste
n
Use Windows Copy Command: Uses the Windows copy command to copy text from the application. n
Type keys <Ctrl+V>: Uses Ctrl+V to copy text from the Dictation Box to the application. n
Use Windows Paste Command: Uses the Windows Paste Command to copy text from the Dictation Box to the application. n
Simulate keystrokes: Sends keystrokes from the Dictation Box to the application.
Use "Simulate keystrokes" if the other methods of pasting text do not work.
Show character count
Select this check box to have the character count display the number of characters in the
Dictation Box.
Keep transferred text in clipboard when the Dictation Box is closed
Check this option to have Dragon hold the text dictated into the Dictation Box in the
Windows clipboard either after you transfer the text unsuccessfully (paste fails) or after you have closed the Dictation Box (should any text remain in the Dictation Box).
86
87
Dragon User Guide
As long as you have chosen Type Keys <Ctrl+V> or Use Windows Paste Command under
Paste options, checking this check box protects you from losing any text when: n
You've transferred with the voice command and it fails to paste into the application where you have placed the cursor n
Text still remains in the Dictation Box when you close it
If you do not select this option, the text dictated into the Dictation Box that has not been transferred will be lost when you close the Dictation Box.
When you have selected this check box, if the transfer fails, you do not lose the text, because the text is stored temporarily in the Windows clipboard. If the application you tried to transfer the text to fails to receive the text, you can open another application and try using the
Windows paste command to paste the text from the clipboard.
Restore Defaults
This option restores all Dictation Box settings to their defaults.
For more information
For more information, see: n
n
The Full Text Control Indicator
Chapter 9: Using DragonPad
Chapter 9: Using DragonPad
This section contains the following topics:
Changing the way text wraps on your screen
About DragonPad
DragonPad is Dragon's built-in word processor, which is optimized for dictation. DragonPad includes basic text formatting features as well as the ability to save and print documents.
You can use DragonPad when you do not need the capability of a full-featured word processor. When you have finished dictating, you can say "Copy All To Clipboard" to copy your text to the Clipboard and "Paste That" to copy the text from the Clipboard into any other program.
Although it is similar to WordPad, DragonPad is customized for use with Dragon and contains speech recognition features that are not available in WordPad.
Changing the way text wraps on your screen
As you are dictating in DragonPad, you may want to change the way text wraps in the
DragonPad window.
To change the way text wraps on your screen
1. On the View menu, click Settings.
2. In the Word Wrap group of the Text or the Rich Text tab, select the wrapping option you want. You can select No wrap, Wrap to window, or Wrap to ruler.
3. Click OK.
Notes
n
The wrapping options affect only how text appears on your screen. When printed, the document uses the margin settings specified in Page Setup.
n
You can set different word wrap options for the text format in which you save the document: text-only (TXT) or rich text format (RTF).
88
89
Dragon User Guide
Chapter 10: Making Corrections
This section contains the following topics:
Correcting dictation - workflow
Correcting text - quick reference
Correcting misrecognized commands
Correcting dictation - workflow
There are a number of ways you can correct the misrecognitions in a document. The following techniques describe the most basic methods. You can combine these techniques in any manner that suits your working style.
Click here for Dragon's Top 5s: "Correcting text"
Correcting using the Correction menu (easiest)
To correct text using the Correction menu
1. Do any of the following: n
Say "Correct that" after the last thing you dictated.
n
Say "Correct <xyz>" or "Select <xyz>" to have Dragon select any editable text in the current document or e-mail message.
n
Say "Correct <abc> through <xyz> to have Dragon select any editable range of text in the current document or e-mail message. n
Press the correction hot key, normally the Minus key (-) on the numeric keypad.
The Correction menu opens*.
Chapter 10: Making Corrections
2. Choose one of the items from the Correction menu or dictate the replacement content.
If you choose one of the suggestions on the Correction menu, Dragon automatically returns the cursor to where you were dictating before you made the correction.
If you dictate something new to make a correction when the Correction menu is open,
Dragon does not return the cursor to its last location. You can use the "Go Back" command or the mouse or keyboard to move it back to where it was.
90
91
Dragon User Guide
Correcting text with the keyboard (fastest)
To correct text with the keyboard
1. Move the insertion point to the beginning of the dictation you want to correct.
2. Press the Correction hot key to display the Correction menu. By default, this is the Minus key (-) on the numeric keypad. You can change the hot key assignment on the Hot keys tab of the Options dialog box.
3. The Correction menu displays a list of optional spellings. n
If the selected alternative is correct, press the Right Arrow key.
n
If one of the other alternatives is correct, press the Down Arrow key until that alternative is highlighted and press the Right Arrow key.
4. Continue until all the text is correct.
Correcting text while playing back dictation (most accurate)
Please note that when you dictate into a Web application, playback availability is limited. For
more information on this, see If you have problems using Web application support
.
To correct text while playing back dictation
1. Move the insertion point to the beginning of the dictation you want to correct.
2. Click Play That Back on the Audio menu of the New DragonBar or Classic DragonBar or, on the Classic DragonBar, click the Begin Playback button on the Extras toolbar. The
Extras toolbar is available only on the Classic DragonBar; to use it, you must first switch to the Classic DragonBar.
3. When the playback of your dictation reaches a recognition error, press the correction hot key. By default, this is the Minus key (-) on the numeric keypad. You can change the hot key assignment on the Hot keys tab of the Options dialog box. You can also click the
Correction button on the Extras toolbar of the Classic DragonBar.
4. The Correction menu displays a list of alternatives for the misrecognition.
n
If one of the alternatives is correct, press the Down Arrow key to highlight that choice and then press Enter to accept it. Playback will continue automatically from the point where you stopped.
n
If no alternative is correct, just type or say the correct text and click the Begin Playback button. Playback will continue from the point where you stopped.
Chapter 10: Making Corrections
Correcting text using voice commands (hands-free)
To correct text using voice commands
1. Say "Go To Beginning of Document."
2. Look for the first misrecognition and say "Select" and the text that is incorrect. The
Correction menu appears with a number of alternatives.
n
If one alternative is correct, say "Choose" and the number of that alternative. For example, "Choose Two." Do not say "Choose Numeral Two" or Dragon will transcribe the phrase as the text "Choose Numeral Two" or "Choose 2" depending on how you set the automatic text formatting properties on the Auto-formatting dialog box.
n
If none of the alternatives is correct, say "Spell That," spell the correct word or words into the Spelling window, and then say "OK."
3. Verify that the correct text appears in the document in place of the misrecognized text and continue to the next misrecognition.
Using Smart Format Rules
You can also use the Smart Format Rules feature to have Dragon recognize when you
correct dictated text that corresponds to an Auto-formatting option or supported by this feature. Dragon then displays a Smart Format Rules dialog box, offering one or more setting adjustments relevant to the change you just made. If you don’t wish to change any setting, you can just ignore the Smart Format Rules box and continue dictating, or say "Cancel" and the box will close.
The Smart Format Rules box may appear when you make a correction using n the Spelling window
or n the keyboard.
For details, see Using Smart Format Rules
, the Auto-formatting dialog box and Creating
Notes
n
If you select a phrase to correct that includes punctuation added to the sentence automatically, the list of corrections that appears in the Correction menu will include a version without the automatically inserted punctuation.
n
When you use the Correction menu with a selection of more than 70 characters,
Dragon selects only the first sentence for correction.
n
The Accuracy Center provides a central location for taking advantage of all the
Dragon tools available to ensure excellent recognition. For more information, see
n
When you use the "select" or "correct" command to select any part of a hyphenated word or a hyphen, Dragon selects the entire hyphenation. For example, in the hyphenated word "brother-in-law" if you say "correct brother" because you only need to change that, Dragon selects "brother-in-law."
92
93
Dragon User Guide
Correcting text - quick reference
When you correct recognition errors, Dragon adapts your User Profile, so errors are less likely to happen again.
See also
n
You can correct recognition errors in the following ways:
To Say
Correct the last thing you said
Say "Correct That"
Correct the selected text
"Correct That"
Correct a range of text
"Correct dark through night" where dark is the first word to correct and night is the last word to correct. You don't have to include the entire phrase when you use this command.
"Correct from <text> to <text>" (Outside US and Canada)
"Correct <text> through <text>" (In the US and Canada)
Use the Extras toolbar
Select the Extras toolbar button on the Classic DragonBar.
Select the Correction button mistake.
to stop playback and correct a
Correct one or all instances of words
"Correct <text>"
Delete text you just dictated
"Scratch That"
The Correction menu closes automatically after you make a choice. If you want to close the
Correction menu without making a selection, say "Cancel" or continue dictating.
You can enable and disable these Direct Editing
commands from the Commands tab of the
Options dialog box.
Workflow
You can experiment with Dragon's various correction options, including both vocal and manual actions (Correction button, Correction hot key, double-click to Correct, Smart Format
Rules), to see what you prefer for a given situation. For a description of three different
Techniques
The following topics explain different aspects of correcting text:
Chapter 10: Making Corrections
Correcting text errors as you dictate
Correcting misrecognized commands
Notes
n
Remember that letting Dragon adapt its Vocabulary to your own words and phrases will prevent many recognition errors. If a word is not in Dragon's active Vocabulary,
Dragon can't recognize it accurately. The Accuracy Center provides a central location for taking advantage of all the Dragon tools available to ensure excellent recognition.
For more information, see Using the Accuracy Center
.
n
If you get a message in the New DragonBar or Classic DragonBar that there is nothing to correct, select the text you want to correct and say "Correct That" again (or press the Correction hot key or click the Correction button).
n
If you select a phrase to correct that includes a comma or period added to the sentence automatically, the list of corrections that appears in the Correction menu will include a version without the automatically inserted punctuation.
n
To dictate the word "correct" at the beginning of an utterance (that is, as the first word after a pause), either say "correct" and then pause, or hold down the Shift key while you speak to force Dragon to recognize the word as dictation and not as a command.
You can change the key that you press to control this behavior on the Hot keys tab of the Options dialog box.
Choosing the correct text
In the Correction menu and the Spelling window, Dragon offers a selection of recognition alternatives. Use the following procedure to choose the alternative you want.
To choose the correct text
If the correct text is one of the alternatives listed, say "Choose" and then say the number of the alternative in the list. As an option, you can press the ALT key and type the number of the alternative from the keyboard (not the numeric keypad).
The text you choose replaces the text in your document.
Example:
If the correct text is the third alternative, say "Choose 3."
Notes
n
Dragon's Smart Format Rules dialog box may appear when you correct autoformatted alphanumeric text using the Correction command, the Spelling window, or
the keyboard. For details, see Using Smart Format Rules
and Automatically Format
Text.
n
When selecting an alternative on the correction menu, say "Choose" and the number of that alternative. For example, "Choose Two." Do not say "Choose Numeral Two" or Dragon will transcribe the phrase as the text "Choose Numeral Two" or "Choose 2"
94
95
Dragon User Guide
depending on how you set the number formatting options on the Auto-formatting dialog box.
n
In the Spelling window, if one of the recognition alternatives is nearly correct, you can say "Select" and the number of the alternative. The alternative text is moved into the text box, so you can edit it. As an option, you can press the SHIFT and ALT keys and type the number of the alternative from the keyboard (not the numeric keypad).
n
If you select a phrase to correct that includes punctuation added to the sentence automatically, the list of corrections that appears in the Correction menu will include a version without the automatically inserted punctuation.
n
The Accuracy Center provides a central location for taking advantage of all the Dragon
tools available to ensure excellent recognition. For more information, see Using the
Correcting misrecognized commands
If you speak a valid command and it is not recognized correctly, use the following procedure to ensure that Dragon recognizes the command in the future. When valid command words and
Results box
the box contains a blue border. Open the Command
Browser from the New DragonBar or Classic DragonBar Tools menu for lists of valid
commands.
To correct a misrecognized command
1. If the window or dialog box containing the misrecognized command is not active (that is, the title bar is not highlighted), click in it to make it active.
2. Say "Scratch That" (to delete the unwanted dictation), "Undo That", or "Undo Last Action" to undo an unwanted action.
3. Say the command again.
If the command was recognized as dictation, hold down the CTRL key as you start to say the command again. Holding down the CTRL key forces Dragon to recognize what you say as a
command. You can also switch to Command Mode .
Notes
n
to match your pronunciation, if necessary.
n
When Dragon recognizes a command, the borders of the results box turn blue. The only exception to this is when you use commands that you usually say without pausing during dictation, such as "new line", "new paragraph", "no caps", or "all caps".
n
The Accuracy Center provides a central location for taking advantage of all the Dragon
tools available to ensure excellent recognition. For more information, see Using the
Chapter 11: Revising Text
Chapter 11: Revising Text
This section contains the following topics:
Handling multiple text matches
Revising text - quick reference
Using Direct Editing commands
Use Dragon Direct Editing (formerly called Quick Voice Formatting) commands to do routine tasks faster by voice.
In previous versions of Dragon, deleting, cutting, copying, italicizing, underlining, and applying bold to text were two-step operations: you had to select the text before you could change it. Now you can perform these actions in one step.
See also
n
Handling multiple text matches
Note
For commands that name a range of text, such as "bold <text> through <text>," Dragon expects to hear "to" or "through" depending on the region you selected when you created your User Profile. Use "through" in the United States and Canada, and use "to" in all other regions.
Formatting text
Use the commands in the following table to quickly format text using Direct Editing.
Formatting commands are available only in programs that support formatting.
97
98
To...
Bold the specified text or a range of text.
Italicize the specified text or a range of text.
Underline the specified text or a range of text.
Capitalize the specified text of a range of text
Dragon User Guide
Say...
Bold <text>
Bold from <text> to <text>
Bold <text> through <text>
Italicize <text>
Italicize from <text> to <text>
Italicize <text> through <text>
Underline <text>
Underline from <text> to <text>
Underline <text> through <text>
Capitalize <text>
Capitalize from <text> to <text>
Capitalize <text> through <text>
Chapter 11: Revising Text
Editing text
Use the commands in the following table to quickly revise text using Direct Editing.
To...
Cut the specified text or a range of text.
Say...
Cut <text>
Cut from <text> to <text>
Cut <text> through <text>
Note: The Cut voice command is turned off by default to keep the word "cut" available for regular dictation. To enable using "Cut" as a command, change the Enable Cut shortcut command setting in the Options dialog box Commands tab and then Exit and
Restart Dragon.
Copy the specified text or a range of text.
Copy <text>
Copy from <text> to <text>
Copy <text> through <text>
Delete the specified text or a range of text.
Delete <text>
Delete from <text> to <text>
Delete <text> through <text>
Handling multiple text matches
Use the commands in this topic when Dragon finds multiple instances of a word or phrase in the part of your document currently showing on screen. Dragon displays a number next to each instance, so that you can choose the one you had in mind for the command. This feature also lets you save time by applying the command to all instances at once if doing so makes sense for that particular command.
Note
n
If you prefer that Dragon change only the instance of a word or phrase nearest to the cursor, you can turn this option off in Dragon's Options dialog box, Commands tab
(see Enable multiple text matches). Then, if Dragon selects the correct word or phrase but not the right instance, you can say "Select Again" to select the previous instance. By default, the feature is turned on.
Here's an example of what Dragon does with the "Italicize <xyz>" command. When you say
"italicize course," Dragon displays a number next to each matching item, as shown here.
Then you can say "Choose <n>," where <n> represents one of the numbered text matches, or "Choose All" to apply the command to all text matches. Dragon only numbers text matches that are visible in your current document window.
99
100
Dragon User Guide
You can cancel text matching by saying "Cancel," continuing to dictate, typing, or clicking the mouse. You can also use "Undo All" after you use "Choose All."
You can use this feature with Microsoft Word
, Notepad, WordPad, Microsoft Outlook, Internet
Explorer , Microsoft InfoPath, DragonPad and Dragon's Dictation Box .
When you say a command that can apply to multiple instances, the New DragonBar or
Classic DragonBar message area (only visible when the Classic DragonBar is Docked or
Floating, always visible on the New DragonBar) provides information about what you can say. This is an example of how it can be useful to check the New DragonBar or Classic
DragonBra for messages regularly, especially if you are new to this version of Dragon.
See also
n
Use the following table as a quick reference for text matching commands.
Chapter 11: Revising Text
Command
Bold <xyz>
Underline <xyz>
Italicize <xyz>
Capitalize <xyz>
Delete <xyz>
Undo All
To...
Apply bold to one or more text matches
Say...
"Choose <number>" or "<n>." For example, say
"Choose 3" or "3" to apply the formatting to only the third instance of a number of text matches.
OR
"Choose all" to apply bold to all instances Dragon shows as text matches.
Apply underlining to one or more text matches
"Choose <number>" or "<n>." For example, say
"Choose 3" or "3" to apply the formatting to only the third instance of a number of text matches.
OR
"Choose all" to underline all instances Dragon shows as text matches.
Apply italics to one or more text matches
"Choose <number>" or "<n>." For example, say
"Choose 3" or "3" to apply the formatting to only the third instance of a number of text matches.
OR
"Choose all" to italicize all instances Dragon shows as text matches.
Capitalize the first letter of one or more text matches
"Choose <number>" or "<n>." For example, say
"Choose 3" or "3" to apply the formatting to only the third instance of a number of text matches.
OR
"Choose all" to capitalize all instances Dragon shows as text matches.
Delete one or more text matches
"Choose <number>" or "<n>." For example, say
"Choose 3" or "3" to delete only the third instance of a number of text matches.
Undo changes to all revised text matches
OR
"Choose all" to delete all instances Dragon shows as text matches.
1. Perform one of the commands in this table to revise two or more multiple text matches.
2. Say "Undo All."
101
102
Dragon User Guide
Command To...
Say...
Note Undo All can undo a maximum of 50 instances of the Bold, Italicize, Underline, and Delete commands, and up to a maximum of 25 instances of the Correct command.
Cut <xyz> Cut one of the text matches
Choose <number>" or "<n>." For example, say
"Choose 3" or "3" to cut only the third instance of a number of text matches.
Note: The Cut voice command is turned off by default to keep the word "cut" available for regular dictation. To enable using "Cut" as a command, change the Enable Cut shortcut command setting in the Options dialog box Commands tab and then Exit and Restart Dragon.
Copy <xyz> Copy one of the text matches
Select <xyz>
OR
"Select <abc> through <xyz>"
Select one of the matches of selected text
Choose <number>" or "<n>." For example, say
"Choose 3" or "3" to copy only the third instance of a number of text matches.
Choose <number>" or "<n>." For example, say
"Choose 3" or "3" to select only the third instance of a number of text matches. You must then choose one of the numbered text matches.
Notes:
• Depending on how Dragon's Correction Options are set, Dragon displays either the Correction menu or the Spelling window when you use the Select command. Changes to multiple text matches do not work from the Spelling window.
• Replacing all instances of text matches does not work with the Select command.
Correct <xyz>
OR
"Correct <abc>" through <xyz>
Use the
Correction menu to change one or more text matches
Choose <number>" or "<n>." For example, say
"Choose 3" or "3" to correct only the third instance of a number of text matches.
OR
"Choose all" to correct all text matches Dragon displays.
Notes:
Chapter 11: Revising Text
Command
Insert before
Insert after
To...
Say...
• Depending on how Dragon's Correction Options are set, Dragon displays either the Correction menu
(see example below) or the Spelling window when you use the Correct command.
If you use "Choose all" when multiple correction options are displayed, you can replace all of the selections with a numbered option from the menu or use "all caps that."
Other menu commands apply to the last match selected.
• Changes to multiple text matches do not work from the Spelling window.
Move the cursor to just before a particular word or phrase in your document
Choose <number>" or "<n>." For example, say
"Choose 3" or "3" to move cursor into position just before the third instance of a number of text matches.
Move the cursor to just after a particular word or phrase in your document
Choose <number>" or "<n>." For example, say
"Choose 3" or "3" to move cursor into position just after the third instance of a number of text matches.
Notes
n n
For commands that apply to a range of text, such as "bold <abc> through <xyz>,"
Dragon expects to hear "to" or "through" depending on the region you selected when you created your User Profile. Use "through" in the United States and Canada, and use "to" in all other regions.
n
Formatting commands are not available in Notepad and may not work correctly in
Internet Explorer. n
To use formatting commands in Microsoft Outlook, make sure either HTML or RTF mail message format is turned on .
Revising text - quick reference
You can revise text by voice in any of the following ways.
See also
n
Handling multiple text matches
103
104
To
Delete text
Cut text
Copy text
Select text
Correct text
Dragon User Guide
Say
"Scratch That" to delete the last thing you said.
"Delete <text>" where <text> is the word or phrase you want to delete *
"Delete from <text> to <text>" *
"Delete <text> through <text>" *
"Cut That" to cut previously selected text or the last thing you said.
"Cut <text>" where <text> is the word or phrase you want to cut *
"Cut from <text> to <text>"
"Cut <text> through <text>"
Note: The Cut Direct Editing command is turned off by default to keep it available for regular dictation.
To enable the Cut command,
1. Choose Tools > Options from the New
DragonBar or Classic DragonBar.
2. Click Commands > Enable Cut Command.
3. Restart Dragon.
"Copy That" to copy previously selected text or the last thing you said.
"Copy <text>" where <text> is the word or phrase you want to copy *
"Copy from <text> to <text>" *
"Copy <text> through <text>" *
"Select that" to select the last thing you said.
"Select <text>" where <text> is the word or phrase you want to change
"Select <text> Through <text>."
Note: Outside the USA or Canada, say "Select <text> To
<text>."
"Select from <text> to <text>"
"Correct That"
"Correct <text>" where <text> is the word or phrase you want to change
"Correct <text> To <text>"
"Correct from <text> to <text>"
"Correct<text> Through <text>."
Chapter 11: Revising Text
To Say
Note: Outside the USA or Canada, say "Select <text> To
<text>."
Correct text once you have selected it
"Correct That"
OR
The words you want to replace the selection.
Back up and resume dictating
Move the cursor back to its last position in documents and e-mail messages
"Resume With <word>" where <word> is the word you want Dragon to resume with. Then, dictate the revised text.
Pause briefly during dictation and say "Go Back" See
Using "Go Back" to move the cursor
.
* indicates a Direct Editing command . You can enable and disable these Direct Editing
commands from the Commands tab of the Options dialog box.
The commands that quote text from the screen (select <xyz>, correct <xyz>, insert after
<xyz>…) work thanks to a functionality called Full Text Control. This functionality depends on Dragon’s ability to constantly obtain information from the text field about its content—for instance, in order to know where words and sentences begin and end, so Dragon can apply spacing between words and capitalization at the beginning of sentences. Most standard text
fields allow full Full Text Control capabilities. For more information, see The Full Text Control
Knowing additional ways to perform the following tasks by voice is useful in revising text.
Click the following links for more detailed explanations.
Automatically Format Text (see Dragon Help)
Notes
n
Dragon can auto-format text and numbers using standard writing conventions or
to words as you dictate. For information about these settings, see Auto-formatting dialog box and The Word Properties dialog box.
n
Dragon's Smart Format Rules appear when you correct auto-formatted
alphanumeric text or Word Properties using the Correction menu, the Spelling
window, or the keyboard. For details, see Using Smart Format Rules
n
When you use the "select" or "correct" command to select any part of a hyphenated word or a hyphen, Dragon selects the entire hyphenation. For example, in the
105
106
Dragon User Guide
hyphenated word "brother-in-law" if you say "correct brother" because you only need to change that, Dragon selects "brother-in-law."
Chapter 12: Moving around in a document
Chapter 12: Moving around in a document
The following topics describe how to move the text insertion point around in a document.
Moving to the beginning or end of a line or document
Moving the insertion point
Use the procedures in this topic to move the text insertion point as follows: n by characters n by words n by lines n by paragraphs
Note
Anytime you move the insertion point by voice, keyboard or mouse, you can move it back to where it was by saying "Go Back."
For more information, see Using "Go Back" to move the cursor .
To move the insertion point by characters
Say the following to move the insertion point left or right by a number of characters.
107
108
Say Then say Then say
"Move" "Right"
"Left"
"<1-20>"
"a character"
"Forward" "<1-20> characters"
"Back"
Examples
"Move Right 3"
"Move Back 15 characters"
Dragon User Guide
Chapter 12: Moving around in a document
To move the insertion point by words
Say the following to move the insertion point by a number of words.
Say Then say Then say
"Move" "Right" "a Word"
"Forward" "<1-20> Words"
"Left"
"Back"
Examples
"Move Left 3 Words"
"Move Forward a Word"
To move the insertion point by lines
Say the following to move the insertion point up or down by lines. These commands press the up and down arrow keys.
Say Then say Then say
"Move" "Up"
"Down"
"<1-20> Lines"
Examples
"Move Up 3 Lines"
"Move Down 5"
To move the insertion points by paragraphs
You can use these commands to move around by paragraphs.
Say Then say Then say
"Move" "Up"
"Back"
"Down"
"Forward"
"a Paragraph"
"<1-20> Paragraphs"
Examples
"Move Up a Paragraph"
"Move Forward 8 Paragraphs"
Notes
n
These commands deselect any text that is selected.
n
Commands that delete by words or paragraphs may not always have the expected effects in programs that do not use the same shortcut keys as WordPad (on which the
109
110
Dragon User Guide
word processing features of Dragon are based). For example, in Windows Notepad, the paragraph commands don't work because Notepad does not recognize a paragraph and in Microsoft Excel, these commands only work in the toolbar edit field.
Moving to specific words
You can move the insertion point before or after a particular word or phrase.
To move the insertion point to a specific word
Say "Insert Before <text>" or "Insert After <text>," where <text> is a word or phrase in the document.
To Say, for example
Move the insertion point before the word "John" "Insert Before John"
Move the insertion point after the phrase "Dear Sir" "Insert After Dear Sir"
Notes
n
These commands deselect any text that is selected.
n
Do not pause anywhere in the middle of saying these commands, including the text.
For example, "Insert Before Dear Sir" is all one command.
Moving to the beginning or end of a document or line
You can use these commands to move the text insertion point to the top or bottom of a document and the beginning or end of a line.
Chapter 12: Moving around in a document
Say Then say
"Go to" "Top"
"Move to" "Top of Document"
"Beginning of Document"
"Start of Document"
"Bottom"
"Bottom of Document"
"End of Document"
"Beginning of Line"
"Start of Line"
"End of Line"
Examples
"Go to Top"
"Move to End of Line"
Note
These commands deselect any text that is selected.
Using "Go Back" to move the cursor
Use the "Go Back" command to return the cursor (insertion point) to its original position after you move the cursor by voice, keyboard or mouse.
To move the cursor back to its original position
n
Pause briefly during dictation and say "Go Back."
You can repeat the command to move the cursor back to where your original action put it.
Examples
Use the Go Back command after commands that move the cursor from place to place, such as: n
"Select <text>." See Selecting text: quick reference
n
"Move <direction>." See Moving the insertion point
n
Moving the cursor with the mouse or keyboard. If you move the cursor around in a document or message with the mouse or keyboard, when you say "Go Back," Dragon returns the cursor returns to where it was last.
n
"Insert before <text>." or "Insert after <text>" See Moving to specific words
n
"Go to" or "Move to." See Moving to the beginning or end of a document or line
n
"Correct <text>." Use "Go Back" if you dictate something new to make a correction
when the Correction menu is open. See Correcting with the Correction menu
111
112
Dragon User Guide
Note
To use "Go Back," the distance from the last cursor location must be greater than 10 characters.
Chapter 13: Selecting text
Chapter 13: Selecting text
This section contains the following topics:
Selecting text - quick reference
Selecting characters and words
Selecting specific words or phrases
Selecting lines and paragraphs
Changing an incorrect text selection
Selecting text - quick reference
When you are dictating, you can select text in these different ways:
Selecting characters and words
Selecting specific words or phrases
Changing an incorrect text selection
You can cancel a selection by saying "Unselect That," selecting different text, or moving the insertion point to another part of the document.
Caution
When text is selected, be careful not to breathe loudly, clear your throat, or make other sounds. Dragon may interpret such noises as speech and replace the selection with new text. If this happens, say "Undo That" right away to reverse the action.
Selecting characters and words
You can use the following commands to select individual characters and words.
113
114
Dragon User Guide
To select characters and words
Say Then say Then say
"Select" "Next" "Character"
"Forward" "<1-20> Characters"
"Previous" "Word"
"Back" "<1-20> Words"
"Last"
Notes
n
When you use the "select" or "correct" command to select any part of a hyphenated word or a hyphen, Dragon selects the entire hyphenation. For example, in the hyphenated word "brother-in-law" if you say "correct brother" because you only need to change that, Dragon selects "brother-in-law." n
You can select punctuation marks by voice. For example, you can say "Select comma." n
By default, when you select a word or phrase, Dragon displays the Correction menu, which you can use to correct recognition errors. You can turn this feature off by clearing (deselecting) the "Select command bring up Correction menu" options on the
Correction tab of the Options dialog box.
n
Commands that delete by words or paragraphs may not always have the expected effects in programs that do not use the same shortcut keys as WordPad (on which the word processing features of Dragon are based). For example, in Windows Notepad, the paragraph commands don't work because Notepad does not recognize a paragraph and in Microsoft Excel, these commands only work in the FormulaBar edit field.
Selecting specific words or phrases
Use the following procedures to select a specific word or phrase:
To select specific words
Say "Select <text>," where <text> is the word or phrase you want to select. The text must be visible on the screen for you to select it.
Examples
To select the words "White House" or "began to feel," say:
"Select White House"
"Select began to feel"
To select a phrase or range of words
Say "Select <text> Through <text>," where <text> is a word or phrase at the beginning and at the end of the range you want to select. The text must be in view on the screen.
Note: Outside the USA or Canada, say "Select <text> To <text>."
Chapter 13: Selecting text
Example
To select the words "enclosed the materials you requested," in the sentence: "I have also enclosed the materials you requested," say:
"Select enclosed Through requested"
Notes
n
You can cancel a selection by saying "Unselect That," selecting different text, or moving the insertion point to another part of the document.
n
In most instances, the "Select" command will display a number next to each instance of the word, allowing to select all instances or just a specific instance. See Handling multiple text matches for more information. If you find that a particular application does not display these numbers, you can still use the "Select Again" command.
n
If you need to use the "Select Again" command, the selection commands search for the instance of the word nearest the insertion point. You can set the direction to always search backward on the Correction tab of the Options dialog box..
n
When you select a word or phrase, Dragon displays the Correction menu, which you can use to correct recognition errors. You can change this behavior on the Correction tab of the Options dialog box.
n
When you use the "select" or "correct" command to select any part of a hyphenated word or a hyphen, Dragon selects the entire hyphenation. For example, in the hyphenated word "brother-in-law" if you say "correct brother" because you only need to change that, Dragon selects "brother-in-law."
Selecting lines and paragraphs
You can select parts of a document by lines or paragraphs, or you can select the whole document in the following ways:
To select one or more lines or paragraphs
Say Then say Then say
"Select" "Next" "Line"
"Forward" "<1-20> Lines"
"Previous" "Paragraph"
"Back" "<1-20> Paragraphs"
You can also say
"Select Document"
"Select All"
Caution
When text is selected, be careful not to breathe loudly, clear your throat, or make other sounds. Dragon may interpret such noises as speech and replace the selection with new text. If this happens, say "Undo That" right away to reverse the action.
115
116
Dragon User Guide
Notes
n
You can cancel a selection by saying "Unselect That," selecting different text, or moving the insertion point to another part of the document.
n
Commands that delete by words or paragraphs may not always have the expected effects in programs that do not use the same shortcut keys as WordPad (on which the word processing features of Dragon are based). For example, in Windows Notepad, the paragraph commands don't work because Notepad does not recognize a paragraph and in Microsoft Excel, these commands only work in the FormulaBar edit field.
Selecting text again
Once you have selected a word or phrase, you can quickly select another occurrence of the same text.
To select text again
Say "Select Again."
Example
In the sentence, "The frost is on the pumpkin, and the fruit is on the vine," say "Select is on the" to select the words "is on the" after the word "fruit."
Then, to select the instance of the words "is on the," after the word "frost" say "Select Again."
Changing an incorrect text selection
When you select text by saying "Select" and the text you want selected, Dragon searches for the nearest instance of the text from the current location of the insertion point. Sometimes the program selects the wrong words. Other times, the program selects the right words, but they are not in the correct location.
When this happens, try the following techniques:
To change an incorrect text selection
If the wrong text is selected, try saying "Select <text>" again. The second time, Dragon searches for different text with a similar pronunciation.
If the wrong text is selected, try using a longer phrase. This provides more information so
Dragon is more likely to select the correct text.
If the correct words are selected but they are not in the correct location, say "Select Again" to select the previous occurrence of the same text.
Notes
n
You can select punctuation marks.
n
You can say "Select period" and then "Select Again" to move the insertion point sentence by sentence.
Chapter 13: Selecting text
n
The default is for Dragon for the nearest instance from the location of the insertion point. You can change the search direction to always be backward on the Correction tab of the Options dialog box.
n
To dictate the word "Select" at the beginning of an utterance (that is, as the first word after a pause), either say "Select" and then pause, or hold down the Shift key while you speak. You can also use Dictation Mode.
117
Dragon User Guide
Chapter 14: Deleting, Cutting, and
Copying Text
118
This section contains the following topics:
Deleting characters, words, lines, or paragraphs
Cutting, copying, and pasting
You can say these commands to cut, copy, and paste selected text to and from documents.
To cut selected text
Say "Cut That."
To copy selected text
Say "Copy That" or "Copy All To Clipboard."
To paste cut or copied text
Say "Paste That."
Deleting dictated text
Use the following procedure to remove text from a document.
To delete the last words you dictated
Say "Scratch That."
Or
Say "Resume With <word>," where word is a word within the last 100 characters of text you dictated.
Chapter 14: Deleting, Cutting, and Copying Text
To delete any text
1. Select the text.
2. Say "Scratch That" or "Delete That."
To delete specific text or a range of text, see Revising words
.
Notes
n
You can repeat "Scratch That" up to ten times to delete the last things you said one at a time, or you can just say "Scratch That <2-10> Times." n
If you just dictated the text and want to delete it, say "Scratch That."
Deleting characters, words, lines, or paragraphs
You can delete any number of words or characters (up to 20) using the following commands.
To delete characters, words, lines, or paragraphs
Say Then Say Then Say
"Delete" "Next" "Character"
"Previous" "1 Character"
"Last" "<2-20> Characters"
"Word"
"1 Word"
"<2-20> Words"
"Line"
"1 Line"
"<2-20> Lines"
"Paragraph"
"1 Paragraph"
"<2-20> Paragraphs"
Examples:
"Delete Next Character"
"Delete Previous 4 Lines"
Notes
n
If you delete text and an extra space remains, say "Delete Next Character," "Delete
Previous Character," or "Backspace" to remove the space.
119
120
Dragon User Guide
n
Commands that delete by words or paragraphs may not always have the expected effects in programs that do not use the same shortcut keys as WordPad (on which the word processing features of Dragon are based). For example, in Windows Notepad, the paragraph commands don't work because Notepad does not recognize a paragraph, and in Microsoft Excel, these commands only work in the FormulaBar edit field.
Deleting by backspacing
Use the following commands to remove characters to the left of the insertion point.
To delete characters
Say "Backspace" or "Backspace" followed by the number of characters you want to delete
(from 2 to 20).
Examples:
"Backspace" (will delete one character)
"Backspace 5" (will delete 5 characters)
Chapter 15: Formatting
Chapter 15: Formatting
This section contains the following topics:
Setting font name, size, and style
Adding new lines and paragraphs
Setting Auto-Formatting Options
Formatting text
You can use the following commands to format text you have just dictated or text you have selected.
For information about applying formatting to multiple instances of words or phrases, see
Handling multiple text matches .
121
122
Dragon User Guide
To
Apply bold
Apply italics
Apply bold italics
Add underlining
Say
"Bold That" or "Format that Bold" to bold previously selected text or the last thing you said.
"Bold <text>" *
"Bold from <text> to <text>" *
"Bold <text> through <text>" *
"Italicize That" or "Format That Italics" to italicize previously selected text or the last thing you said.
"Italicize <text>" *
"Italicize from <text> to <text>" *
"Italicize <text> through <text>" *
"Format That Bold Italic" or "Format That Bold Italics"
"Underline That" or "Format That Underline" to underline previously selected text or the last thing you said.
"Underline <text>" *
"Underline from <text> to <text>" *
"Underline <text> through <text>" *
Add strikeout
Remove all bold, italics, underline, and strikeout formatting
Change text to initial capitals
Change text to uppercase
Change text to lowercase
Create a bulleted list
Left-align text
Right-align text
"Format That Strikeout"
"Restore That" or "Format That Regular" or "Format That
Plain"
"Format That Caps" or "Format That Initial Caps"
"Format That Uppercase" or "all caps that" or "capitalize
XYZ"
"Format That Lowercase" or "No-Caps That"
"Format That Bullet Style"
"Format That Left Aligned" or "Left Align That"
"Format That Right Aligned" or "Right Align That"
Center text
Put hyphens between words
"Format That Centered" or "Center That"
"Hyphenate That"
Combine multiple words into one "Compound That"
Chapter 15: Formatting
* indicates a Direct Editing command . You can enable and disable these Direct Editing
commands from the Commands tab of the Options dialog box.
To set a font name, size, or style
Notes
n
The commands that quote text from the screen (select <xyz>, correct <xyz>, insert after <xyz>…) work thanks to a functionality called Full Text Control. This functionality depends on Dragon’s ability to constantly obtain information from the text field about its content—for instance, in order to know where words and sentences begin and end, so Dragon can apply spacing between words and capitalization at the beginning of sentences. Most standard text fields allow full Full Text Control
capabilities. For more information, see The Full Text Control Indicator .
n
You can combine different formatting and font style commands. For example, you can say: "Format That Caps Bold" or "Format That Bullet Style Italic." n
In the DragonPad, when you use the "Format That" command to align an empty paragraph, the previous paragraph is aligned also. To prevent this, dictate some text in the new paragraph before saying the alignment command.
n
Dragon can automatically format text and numbers as you dictate using standard writing conventions. For information about these settings, see the Auto-formatting dialog box.
n
Dragon's Smart Format Rules appear when you correct auto-formatted alphanumeric text using the Correction command, the Spelling window, or the
keyboard. For details, see Using Smart Format Rules
and the Auto-formatting dialog box.
Formatting numbers
You can have Dragon type your dictation as numerals. You can also change the format of text while you are dictating it or while you are editing existing text that you have selected.
To format dictation as numerals
Say "Start Numbers Mode"
To turn Numbers Mode off, say "Stop Numbers Mode"
Note
n
You can select text that contains several numbers separated by words. When you say one of these commands, the numbers will all reformat without changing the text.
n
Dragon can automatically format text and numbers as you dictate using standard writing conventions. For information about these settings, see the Auto-formatting dialog box.
n
Dragon's Smart Format Rules appear when you correct auto-formatted alphanumeric text using the Correction command, the Spelling window, or the
keyboard. For details, see Using Smart Format Rules
and the Auto-formatting dialog box.
123
124
Dragon User Guide
Setting font name, size, and style
You can use commands to specify any combination of font name, size, and style, in that order.
These commands change selected text and text you dictate from then on.
To set a font name, size, or style
Say "Set Size" or "Set Font Size" or "Format That" and the font name, size, and/or style.
Examples:
"Set Font Times"
"Set Font Size 12 Points"
"Format That Courier 18 Points Bold"
"Format That Arial 12 Points"
To remove font formatting
To remove bold, italics, underline, and strikeout formatting, say "Format That Plain Text."
Notes
n
You can specify any combination of font name, size, and style, but you must specify attributes in that order (name, size, style). If you specify only a size, you must say
"Points." For example, say "Format That 12 Points." n
Not all of these commands work in all applications. These commands do work in
Microsoft Word, Microsoft InfoPath, Corel WordPerfect, DragonPad, and WordPad.
for additional application-specific commands.
n
Commands that start with "Set Font" change selected text and text you dictate from then on.
n
Commands that start with "Format That" change the selected text or what you just said.
n
You can specify any combination of font name, size, and style, but you must specify attributes in this order: name, then size, then style.
Aligning text
You can align text while you are dictating it or while you are editing existing text that you have selected.
Chapter 15: Formatting
To Say
Center text
Left align text
"Center That" or "Format That Centered"
"Left Align That" or "Format That Left Aligned"
Right align text "Right Align That" or "Format That Right Aligned"
Adding new lines and paragraphs
While you are dictating, you can use the following commands to duplicate the action of pressing the Enter key once (to add a new line) or twice (to add a new paragraph).
To Say
Add a new line "New Line"
Add a new paragraph "New Paragraph"
Note
Saying "New Paragraph" presses the Enter key twice and capitalizes the next word you dictate.
Hyphenating words
Dragon automatically hyphenates words based on standard usage, but you can also insert hyphens manually.
To hyphenate words
Say "Hyphenate That" to hyphenate the last phrase you said. You can also select specific words and say "Hyphenate That."
Spaces between words are replaced with hyphens. Any tabs or line breaks are also replaced.
Note
You can hyphenate words as you dictate by saying "hyphen" between words. For more information, see Dictating hyphenated and compound words in the Dragon Help.
Joining words
Dragon automatically joins words based on standard usage, but you can also join words manually.
To join words
Say "Compound That" to join the last words you said. Or, select specific words and say
"Compound That."
125
126
Dragon User Guide
Spaces between words are removed. Any tabs or line breaks are also removed. The word is added to your Vocabulary.
Note
You can join words as you dictate by saying "no space." When you use this technique, the new word is not added to your Vocabulary, but you can add it as a new compound word if
necessary. For more information, click Adding words and phrases to your Vocabulary
.
Setting Auto-Formatting Options
You can configure how Dragon formats commonly used words and phrases.
Using Smart Format Rules
You can also use the Smart Format Rules feature to have Dragon recognize when you
correct dictated text that corresponds to an Auto-formatting option or supported by this feature. Dragon then displays a Smart Format Rules dialog box, offering one or more setting adjustments relevant to the change you just made. If you don’t wish to change any setting, you can just ignore the Smart Format Rules box and continue dictating, or say "Cancel" and the box will close.
The Smart Format Rules box may appear when you make a correction using n the Spelling window
or n the keyboard.
For details, see Using Smart Format Rules
, the Auto-formatting dialog box and Creating
To set auto-formatting options
1. On the New DragonBar or Classic DragonBar, select Tools > Auto-Formatting Options.
The Formatting dialog appears.
2. Select the checkboxes of the formatting options that you want to enable. See The Auto-
Formatting dialog box for a description of the different formatting options.
3. Click OK to save your changes.
Creating Word Properties
Use this procedure to see or edit the of a vocabulary entry.
To open the Word Properties dialog box
1. Open the Vocabulary Editor (say "Edit Vocabulary" or use the DragonBar's Vocabulary menu).
2. In the list, click the entry that interests you.
Note: Scroll up to view alphanumeric words and special characters in the Vocabulary.
3. Say "click Properties" or click the Properties button.
To revise default formatting
Chapter 15: Formatting
n
Modify the Printed form field as warranted.
n
Add or revise automatic formatting as warranted.
To revise Context
1. Say “click Use printed form 1” or click "Use printed form 1" and then use the drop-down list to change to "after numbers" or "before numbers" or "between numbers" as warranted. As an example, here is how Dragon displays the Context for the form "kHz" to be used for the word "kilohertz" after a number:
2. Say "click Format" or click the Format button to open the Written Form Formatting dialog box.
3. Choose from the following options:
127
128
Dragon User Guide
Option Description
Insert <value> space before and <value> space after
0
1
2
Inserts the specified number of spaces before and after the word or phrase.
Use the drop-down fields to select a number of spaces. Valid values are:
Precede by
<value> and follow with
<value>
Inserts the specified spacing before and after the word or phrase.
Use the drop-down fields to select the spacing type. Valid values are:
-(nothing)
- New Line
- New Paragraph
- Tab
Format the next word with
<value>
Inserts the word or phrase using the specified capitalization.
Use the drop-down field to select the capitalization type. Valid values are: with normal capitalization
There is no special capitalization associated with this word.
- capitalized (initial capitals)
- in all capitals
- without capitals
Format preceding numbers
<value> and following numbers
<value>
Inserts numbers using the specified format.
Use the drop-down field to select the format. Valid values are: normally (Dragon determines whether to insert Arabic numerals or the written form of the number)
- a-s numerals
- as Roman numerals
Sample
Lower case in titles
Displays a preview of how Dragon will apply formatting before and after your word.
Causes the word or phrase to never be capitalized unless it appears at the beginning of a sentence or phrase. This is typical of short articles, such as "a", "of", or "the" when they appear in a title that is normally capitalized, for example "The Grapes of
Wrath".
Check the "Lower case in titles" checkbox to enable this feature.
If you wish to add a second Context, repeat the steps above.
Chapter 15: Formatting
129
Chapter 16: Working in Programs
Chapter 16: Working in
Programs
This section contains the following topics:
Using the Microsoft Office ribbon
Scrolling in popular programs
You can use the following commands in many programs to scroll and move the view through the program's work area.
These voice scrolling commands work with the supported versions of Microsoft Office programs, including Word, Outlook, Excel, PowerPoint, and InfoPath.
131
132
Dragon User Guide
To
Start automatic upward scrolling
Start automatic downward scrolling
Stop automatic scrolling
Increase the speed of automatic scrolling
Reduce the speed of automatic scrolling
Move the visible page up one line
Move the visible page down one line
Move up one line in the text
Move down one line in the text
Move the page up by a screen
Move the page down by a screen
Say
"Start Scrolling Up"
"Start Scrolling Down"
"Stop Scrolling"
"Scroll Faster"
"Scroll Slower"
"Scroll Up"
"Scroll Down"
"Line Up"
"Line Down"
"Page Up"
"Page Down"
For more information on how these commands work in individual programs, please see the following: n
Scrolling in windows and lists
n
n
Basic document commands in Microsoft Word
n
Using other Microsoft Outlook commands n
Basic commands for Microsoft Excel
Using the Microsoft Office ribbon
Dragon supports the ribbon and tab based interface provided in Microsoft Office 2010 and
Microsoft Office 2013. Both 32-bit and 64-bit versions of Microsoft Office are supported.
The ribbon presents commands organized into a set of tabs. The tabs on the ribbon display the commands that are most relevant for each of the task areas in the applications.
Using the Office ribbon
Use the following procedure with the Office ribbon.
To use the ribbon with Dragon
Say the name of the tab or click the tab.
For example, to open the Home tab, say "Home" or click the tab.
Chapter 16: Working in Programs
Dragon voice commands for the Office ribbon also work when the ribbon is minimized. To minimize the ribbon say, “Minimize the ribbon” or “Collapse ribbon.” To expand it say,
“Maximise ribbon” or “Expand ribbon.” You can also “pin,” “show,” “toggle,” “unhide,” and
“view” the ribbon with those respective commands.
To dictate from an open tab
Say the name of the feature you want to access or click on it.
For example, to apply a heading style to a paragraph you're working on, say "Heading 1" or select Heading 1 from the Styles list.
If you're unsure of the name of a feature, you can hold your mouse pointer over the graphic displaying the feature until the name appears.
Here's an example of how the Office 2013 ribbon looks when you click the Home tab in
Microsoft Word 2013.
Note
To access the File tab in any of the Office 2010 applications, say "File Tab".
To access the File tab in any of the Office 2013 applications, say "Click File Tab".
For example, here's the type of display you'll see when you click the File tab in Word 2013:
The Application menu
133
134
Dragon User Guide
In Windows 7, WordPad and Windows Live Mail 2011 there is a new menu for filerelated commands called the Application menu (shown below).
To access file-related commands in these applications, say "click Application menu."
Chapter 17: About spoken commands in word processing programs
Chapter 17: About spoken commands in word processing programs
This section contains the following topics:
About spoken commands in word processing programs
Dictating in your word processor
Basic document commands in Microsoft Word
Creating, opening, and closing a document
Formatting text in Microsoft Word
About spoken commands in word processing programs
Dragon provides Natural Language Commands for use with popular word processing programs other than Microsoft Word and Corel WordPerfect. By using these commands, you can avoid the multiple menu-selection and mouse-movement steps associated with the traditional Microsoft Windows interface. These commands let you: n
Move the text insertion point around a document n
Select a word, phrase, or block of text n
Format text (including indenting text, changing text fonts and styles, setting colors, applying paragraph styles, adding tables, setting margins, and inserting new lines and paragraphs) n
Run spelling and grammar checks n
Edit text (including moving, copying, pasting, and deleting text) n
Print all or part of a document and print preview your work
Because the number of valid commands is so large, you should just try saying what you want to do. If you get unexpected results, say "Undo That" to undo the action and try a different
way to speak the command. Alternatively, you can open the Command Browser
or the
for more information.
135
136
Dragon User Guide
Notes
n
Dragon displays commands with a blue border in the Results box. If you say a phrase that produces no action, look in the Results box. If the box does not have a blue border,
Dragon does not recognize it as a valid command. For example, if you say "Insert a 2 by 2 Table" when the insertion point is inside a table, nothing happens because you cannot insert a table inside a table.
n
When creating a new document, always give the document a name before starting your dictation.
Dictating in your word processor
If you are dictating in a word processor, there are some things you can do to make Dragon work more efficiently: n
Do not run other programs when you are running your word processor.
n
Disable your word processor’s automatic spelling and grammar checker. Turning these options off frees memory for speech recognition. When you have finished dictating you can run the grammar checker. Dragon does not make spelling errors.
n
Disable any automatic correction or other automatic features such as automatic formatting if they are not necessary. Turning these options off frees memory for speech recognition.
n
Divide large documents into multiple smaller documents. Large documents cause
Dragon to work more slowly. The maximum document size you should have depends on your system and its resources. n
You can cancel a selection by saying "Unselect That," selecting different text, or moving the insertion point to another part of the document.
Caution
When text is selected, be careful not to breathe loudly, clear your throat, or make other sounds. Dragon may interpret such sounds as speech and replace the selection with new text. If this happens, say "Undo That" one or more times right away to reverse the action.
Chapter 17: About spoken commands in word processing programs
Working with Microsoft Word
Dragon provides a large number of Natural Language commands to use with different versions of Microsoft Word. Using these commands, you can avoid the multiple menuselection and mouse-movement steps associated with the traditional Microsoft Windows interface. Because the number of valid commands is so large, you should just try saying what you want to do. If you get unexpected results, say "Undo That" to undo the action and
try a different way to speak the command. Alternatively, you can open the Command
Browser or the Dragon Learning Center for more information.
You can cancel a selection by saying "Unselect That," selecting different text, or moving the insertion point to another part of the document.
The following topics describe the natural language commands you can use to perform some common tasks using Word:
Working with tables (see Dragon Help)
Using Voice Notations (see Dragon Help)
Basic document commands in Microsoft Word
Use this procedure as a reference for basic document operations using Microsoft Word.
See also
n
For text formatting and editing help, see Using Direct Editing commands and
Handling multiple text matches .
n
Using the Microsoft Office ribbon
Creating, opening, and closing a document
To Say
Create a new document "Create New File" or "Open New File"
Open an existing document
Close a document
1. "Open File"
2. "<file name> dot <file extension>", for example, "My Document
Dot Doc"
3. "Press Enter"
"Close File" or "Close Document"
137
138
Dragon User Guide
Saving a document
To
Save a document as a .doc file
Save a document with a new file name and file type
Save a document in HTML format
Save as document template
Say
1. "Save Changes"
2. Dictate a file name (only needed if this is the first time the file has been saved)
3. "Click Save"
1. "Save Document As"
2. Dictate a file name
3. "File Type <file type from list>", for example, "RTF"
4. "Click Save"
1. "Save Document as Web Page"
2. "Click Save"
3. If a dialog box appears warning of a text format loss,
"Click Continue"
"Save the Page Settings as Default"
Chapter 17: About spoken commands in word processing programs
Page Setup
To
Set the page orientation
Set the size
Set margins
Number pages
Create headers and footers
Add footnotes
Say
"Set Page Orientation to Landscape"
"Set Page Orientation to Portrait"
"Set Page Width to <number> Inches/Centimeters", for example, "Set
Page Width to Eight Inches"
"Set Page Height to <number> Inches/Centimeters", for example, "Set
Page Height to Eleven Inches"
"Set Left/Right Margin to <number> Inches/Centimeters", for example, "Set
Left Margin to Two Inches"
"Set Top/Bottom Margin to <number> Inches/Centimeters", for example,
"Set Bottom Margin to Five Centimeters"
"Add Page Numbers"
"Create Page Numbers"
1. "Go To Header/Footer"
2. Dictate text to appear in the header or footer
3. "Close Header/Footer"
1. Move the insertion point to the location where you want the footnote
2. "Insert Footnote Here"
3. Dictate the footnote text
4. "Close Footnotes"
Viewing a document
To
View a document
Say
"Preview the File"
"View Master Document"
"Preview Document as HTML"
"Close the Preview"
"Set View to Normal"
Enlarge or reduce the document view
"Zoom to <number> Percent", for example, "Zoom to Fifty
Percent"
"Set Zoom to Page Width/Height"
Change the display "Show/Hide Headers and Footers"
"Show/Hide the Ruler"
"Show/Hide Paragraph Marks"
139
140
Dragon User Guide
Printing
To
Print a range of pages
Say
"Print Pages <number> to <number>", for example, "Print Pages One to
Three"
Print part of a page 1. "Select <First/Last> paragraph", for example, "Select the Last
Paragraph"
2. "Print the Paragraph" or "Print the Selection"
Checking spelling and grammar
To Say
Check spelling 1. "Check Spelling"
2. "Click Change" or "Click Ignore" depending on how you want to respond
3. "Click Close" when the spelling check is complete
Searching and replacing
To
Search for text
Replace all instances of a word or phrase
Say
1. "Find a Word"
2. Dictate the word or phrase you want to find in the Find dialog box
3. "Click Find"
1. "Find Text"
2. Dictate the word or phrase you want to find
3. "Click Replace"
4. "Click Replace With" (to move the insertion point to the
Replace With field)
5. Dictate the replacement word or phrase
6. "Click Replace All"
7. "Click Close" (to close the Find and Replace dialog box)
Chapter 17: About spoken commands in word processing programs
Inserting document segments
To
Say
Add a page
1. "Go To <location>" (to move the insertion point to where you want to insert the new page). For example, "Go To Bottom" to add a new page at the end of the current document.
2. "Add a New Page"
Create a line break
1. "Go To <location>" (to move the insertion point to the location where you want the text to break). For example, "Go To third line" to add a line break at the end of the third line in the current paragraph.
2. "Insert Hard Line Break"
Create a page break
1. "Go To <location>" (to move the insertion point to the location where you want the text to break). For example, "Go To third paragraph" to add a page break at the end of the third paragraph in the current page.
2. "Insert Page Break"
Add the date and time
1. "Go To <location>" (to move the insertion point to the location where you want to place the information)
2. "Insert Date and Time" or "Insert Date" or "Insert Time"
141
142
Moving text
Dragon User Guide
Chapter 17: About spoken commands in word processing programs
To
Move a word
Do
1. Move the insertion point to the word you want to move
2. "Select Word"
3. "Move Word Forward/Back <number> Words/Lines", for example, "Move Word
Forward Five Lines"
Move a line
1. Move the insertion point to the line you want to move
2. "Select Line"
3. "Move Line Forward/Back <number> Lines" or "Move Line to the Beginning/End of Paragraph/Document", for example, "Move Line to the End of Paragraph"
Move a paragraph
1. Move the insertion point to the paragraph you want to move
2. "Select Paragraph"
3. "Move Paragraph Forward/Backward <number> paragraphs" or "Move
Paragraph to the Beginning/End of Document", for example, "Move Paragraph to the Beginning of Document" or "Move Paragraph Backward Six Paragraphs"
143
144
Dragon User Guide
Moving around in a document
To
Go to a specific place in a document window
Move up or down one line
Move up or down one page
Go back to the last place you moved the cursor
Switching between open documents
Say
"Go to <location>," where location can be top, bottom, start, or end.
"Line Up" or
"Line Down"
"Page Up" or
"Page Down"
"Go Back" See Using "Go Back" to move the cursor
To Say
Switch between open documents
1. "Say "List windows for Microsoft Word"
Do one of the following:
Say "Choose n", where n is the number of the window you want to switch to. For example, say "Choose 2"
OR
Choose the number of the program from the list and click OK
See Scrolling in popular programs
, Scrolling in windows and lists
, and Moving the insertion point .
Note
You can also select the next or previous word, line, or paragraph by moving the insertion point to either before or after the word, line or paragraph you want to select and saying "Select
Next/Previous Word/Line/Paragraph".
Note
In MS Word 2013, you cannot use dictation or selection/correction by voice when in "Read
Mode", although the text control indicator will turn green. It is possible to dictate text and perform operations when you are in the comments field in Read Mode.
Selecting text
You can use the following voice commands to select text in Microsoft Word and
OpenOffice.org Writer.
Chapter 17: About spoken commands in word processing programs
To
Select a word, line, or paragraph
Select an adjacent word, line or paragraph
Do
1. Move the insertion point to the word, line, or paragraph you want to select
2. Say "Select <word>/<line>/<paragraph>"
1. Move the insertion point to either before or after the word, line, or paragraph you want to select.
2. Say "Select <next>/<previous>
<word>/<line>/<paragraph>"
Select specific text or a range of text (see also Handling multiple text matches )
Select <text>*
Select <text> Through <text>(Note: Outside the
USA or Canada, say "Select <text> To <text>".)
Select from <text> to <text>
* For <text> substitute whatever text you want select.
Extend a selection "Extend Selection Forward/Backward by
<number> Words/Lines/Paragraphs"
"Extend Selection Up/Down by <number>
Lines/Paragraphs"
"Extend Selection Left/Right by <number> Words"
Formatting text in Microsoft Word
This topic contains examples of voice commands to format text in Microsoft Word.
For information about applying formatting to multiple instances of words or phrases, see
Handling multiple text matches .
Changing text properties
To Say
Change text properties "Set Word/Line/Paragraph to Strikeout"
"Underline this Word/Line/Paragraph"
"Italicize Next <number> Words"
"Bold This Page"
145
146
Dragon User Guide
Changing font and point sizes
To
Change font name and point size
Say
"Set the Font to Twenty Four Points Times in the
Word/Line/Paragraph"
"Increase/Decrease the Font Size to Eighteen Points in the
Word/Line/Paragraph"
"Set the Font to Courier in the
Selection/Word/Line/Paragraph/Page/Section/Document"
"Decrease Selection by Two Points"
Changing font properties
To
Change font properties
Say
"Turn on Bold and Italics"
"Format That Regular"
"Italicize the Next <number> Words/Lines/Paragraphs," for example,
"Italicize the Next Five Lines"
"Unitalicize That"
Changing capitalization
To
Change case
Say
"Capitalize the First/Last/Next <number> Words/Lines/Paragraphs," for example,
"Capitalize the Next Five Words"
"Lowercase the First/Last/Next <number> Words/Lines/Paragraphs," for example,
"Lowercase the Last Ten Words"
"Toggle the Case of the Word"
Changing font color
To Say
Change font color "Set Font Color to Green in This Line"
"Set the Color to Red in the Selection"
"Set It to Dark Blue" (refers to current word or selection)
Changing line spacing
To
Change line and paragraph spacing
Say
"Double Space the Paragraph"
"Single Space Selection"
"Increase Paragraph Spacing to <number>
Inches/Centimeters"
Chapter 17: About spoken commands in word processing programs
Changing text justification
To Say
Change text justification "Justify the Document"
"Right Justify It" or "Right Align Selection"
"Left Align This Line/Paragraph"
"Set Initial Indent to <number> Inches/Centimeters"
"Set Hanging Indent to <number> Inches/Centimeters on This Page"
Creating bulleted or numbered lists
To Say
Create and delete bullet points or list numbers "Set the paragraph to Bulleted/Numbered"
"Delete Bullets From the Document"
"Unnumber the Selection"
Working with outlines
To Say
Create an outline "Set View to Outline"
147
Dragon User Guide
Chapter 18: Email Programs
148
This section contains the following topics:
Commands for working with e-mail messages
Commands for moving around in e-mail
Dictating e-mail and Web addresses
Commands for Windows Live Mail
Supported e-mail programs
The e-mail commands listed in this section work in the following desktop e-mail applications: n
Mozilla Thunderbird n
Windows Live Mail
Dragon's Web application commands
, along with many of the commands for desktop e-mail applications, work in these Web-based applications in supported Web browsers: n
Gmail n
Hotmail and Outlook.com n
Yahoo
Note
Regardless of what email program you use, you should ensure that Dragon can transcribe the contact names and email addresses that matter to you. See the Accuracy Center for ways
to do it, including adding contacts and scanning sent e-mail .
Working in e-mail programs
The commands described in this topic are only applicable to desktop e-mail applications, such as Microsoft Outlook. There are different commands for Web-based e-mail. If you're using
web-based email programs, see Using web-based email
for the commands.
Check the list of supported e-mail programs
to verify that Dragon works with your e-mail application.
Chapter 18: Email Programs
To start an e-mail program
Say "Start Mail" to start your default e-mail program.
To access and create e-mail messages
Use the following commands to check for, open, and create messages.
To
Check for new messages
Say
"Check Mail"
Open the selected e-mail message "Open Mail"
Create an e-mail message "New Mail"
Commands for working with e-mail messages
To work with e-mail messages
Use the following commands if you are working in your Inbox and have a message selected or open.
To Say
Reply to the sender of the current message
"Reply to Mail" or "Reply"
Reply to the sender and all recipients of the current message
"Reply to All"
Forward the current message "Forward Mail"
Print the current message
Delete the current message
Send the current message
"Print Mail"
"Delete Mail"
"Send Mail"
Close the active e-mail message window
"Close Mail" This command does not close your mail program. It does not work in Netscape Messenger.
Commands for moving around in e-mail
To move around in email
Use the following commands to move around when editing e-mail. Please note that only "Go to Previous Field" and "Go to Next Field" are supported in Windows Live Mail.
149
150
Dragon User Guide
To
Move to the To field
Move to the Subject field
Move to the Body field
Move to the CC field
Move to the BCC field
Move to the First field
Move to the Previous field
Move to the Next field
Move to the Last field
Move up or down one line
Move up or down one page
Go to a specific place in a document or message window
Go back to the last place you moved the cursor
Say
"Go to To"
"Go to "Subject"
"Go to Body"
"Go to CC Field"
"Go to BCC field"
"Go to First Field"
"Go to Previous Field"
"Go to Next Field"
"Go to Last Field"
"Line Up" or
"Line Down"
"Page Up" or
"Page Down"
"Go to <location>," where location can be top, bottom, start, or end.
"Go Back" See Using "Go Back" to move the cursor
Note
You can say "E-mail," "Message," or "Memo" in place of "Mail" in these commands.
Dictating e-mail and Web addresses
You can dictate e-mail and Web addresses as you normally speak them. To make sure that the address is lowercase, say "no caps on".
Chapter 18: Email Programs
To Dictate Say
"no caps on info at sample company dot com no caps off" http://www.samplecompany
.com/sales
"no caps on http www dot sample company dot com slash sales no caps off"
Notes
n
The "Web and E-mail Addresses" box must be selected on the Auto-formatting dialog box. for you to dictate e-mail addresses as described here.
n
You can say the following abbreviations by pronouncing them as words: com, net, org, and sys. Say the following abbreviations by saying their letters: edu, gov, mil, ca, de, fr, jp, sp, and uk.
n
If an address contains nonwords or words that Dragon does not recognize (for example, "baxterex" in "[email protected]"), you can correct the recognition error and the address will usually be recognized in the future. You can also add names that you commonly use to your Vocabulary.
n
You can use the "Spell That" command to correct e-mail and Web addresses by spelling.
n
You can add the names in your address book to your Dragon Vocabulary by running
tool.
Commands for Windows Live Mail
You can use the following voice commands using Windows Live Mail.
151
152
Dragon User Guide
To
Start the e-mail application
Read messages
Say
"Start Windows Live Mail"
Instead of "start," you can also say "open," "launch" or "show".
For example, say "show Windows Live Mail"
"Check for New Mail"
"Open Message"
"Go To Next Unread Message"
"Mark Message as Unread"
"Go To Previous Message"
"Delete Message"
"Close the Message Window"
Create and send a message 1. "Create Message"
2. "Move to Text Field"
3. Then, dictate the content of your message and when you ready to send, say "Send Message".
"Go to [the] [Windows] contacts" (for Windows 7 only) Go to your Windows contacts folder (for Windows 7 only)
Reply to a message
"Display contacts folder" (for Live Mail only)
1. "Reply to Author" to reply to the sender only, or "Reply to All" to reply to all recipients of the message
2. "Move to Text Field"
3. Then, dictate the content of your message and when you ready to send, say "Send Message".
Forward a message
Sort Inbox messages
"Forward the Message"
"Sort ascending | descending"
"Sort e-mails ascending | descending"
"Sort memos ascending | descending"
"click Application menu" Access file-related commands
Note
Words shown in [brackets] are optional.
Chapter 19: Working with Web applications
Chapter 19: Working with Web applications
This section contains the following topics:
About the Dragon Web Extension
Browser requirements for the Dragon Web Extension
Installing and enabling the Dragon Web Extension
How to tell if the Dragon Web Extension is Enabled
Editing text in a supported Web application
Using Dragon's Web capabilities without the Dragon Web Extension
If you have problems using Web application support
About the Dragon Web Extension
allows you to use Full Text Control
in supported browsers and most Web applications to help you perform common tasks by voice. For example, you can say "Click Link", "Click Button", or "Click Inbox" to click the elements on the page. If you do not install the Dragon web extension, you cannot click page elements by voice. In addition,
Full Text Control is not available for dictation in the browsers and Web applications. Without the Dragon web extension enabled, you'll need to click Web page elements using your mouse and keyboard, and dictate content using the Dictation Box.
Note: Dragon's functionality differs between Web browsers. For more information, see
Working with a Web browser . For example, in Chrome, you cannot use the “Refresh Page”
command. For this action, you must use global commands, such as mouse commands, or press commands, such as “Press F5”.
Browser requirements for the Dragon Web Extension
The Dragon Web Extension is available in the following Web browsers and versions:
n
Microsoft Internet Explorer, version 9, 10, and 11, both 32-bit and 64-bit n
Mozilla Firefox version 24 and later n
Google Chrome
153
Dragon User Guide
Important: The makers of Firefox and Chrome frequently release new versions of their browser. For the latest details on Dragon functionality with a particular application, please see
the Technical Support page for Dragon on the Nuance website.
If you don't have one of these browsers in the version listed, you cannot click page elements by voice. In addition, Full Text Control is not available in the browsers and Web applications.
You'll need to click page elements manually (or using MouseGrid and mouse commands) and, if you want Full Text Control, you'll need to use the Dictation Box.
Important
to perform such actions by voice, you must use mouse commands or press commands such as “press F5”.
Feature support
The feature is not supported in the following modes: n
Chrome's Incognito mode n
Chrome's Metro mode n
Firefox's Metro mode
Installing and enabling the Dragon Web Extension
To enable The Dragon Web Extension
, do the following.
If you need to re-install, see
.
Internet Explorer 9 and later
1. Open Internet Explorer. A prompt appears the first time you open the browser after
Dragon installation.
154
Note: If you click No Thanks at the initial prompt and then later decide to install the extension, you must close and reopen both Internet Explorer and Dragon for the prompt to reappear. If you select Do not ask me again and then later decide to install the extension,
below.
2. Click Proceed. Installation instructions appear.
Chapter 19: Working with Web applications
3. Follow the instructions provided.
Mozilla Firefox 24 or later
1. Open Firefox. When a valid user profile is loaded, a prompt appears the first time you open the browser after Dragon installation.
Note: If you click No Thanks at the initial prompt and then later decide to install the extension, you must close and reopen both Firefox and Dragon for the prompt to reappear. If you select Do not ask me again and then later decide to install the extension,
below.
2. Click Proceed. Installation instructions appear.
155
156
Dragon User Guide
Chapter 19: Working with Web applications
3. Click the Install web extension button, and then follow the instructions on the screen to install the web extension.
4. Click the Verify plugin settings button, and then follow the instructions on the screen to verify the plugin settings.
When you've installed the extension and plugin, ensure that the Update Add-ons
Automatically option is selected to receive updates from Nuance. To select it:
1. Click the Firefox button appears.
2. Click the cog icon already selected.
, and then select Add-ons. The Add-ons Manager
, and then select Update Add-ons Automatically if it is not
Google Chrome 16 or later
1. Open Chrome. When a valid user profile is loaded, a prompt appears the first time you open the browser after you install Dragon.
Note: If you click No Thanks at the initial prompt and then later decide to enable RIA support, you must close and reopen both Chrome and Dragon for the prompt to reappear. In addition, if you select Do not ask me again and then later decide to install
the extension, see Do you need to reinstall?
157
158
2. Click Proceed. The Chrome Web Store opens.
Dragon User Guide
3. Click . A confirmation appears.
Chapter 19: Working with Web applications
4. Click Add. Chrome downloads and installs the extension.
Resolving problems
If you're having trouble, see If you have problems using Web Application support
.
Do you need to re-install?
To use all of Dragon's functionality in your browser, you must enable Dragon's web extension. If you did not enable the extension, open the browser you want to install to use the following links while in that browser:
Internet Explorer: https://dnsriacontent.nuance.com/13/addons.html?lang=ENX&browser=ie
Chrome: https://dnsriacontent.nuance.com/13/addons.html?lang=ENX&browser=chrome
Firefox: https://dnsriacontent.nuance.com/13/addons.html?lang=ENX&browser=firefox
How to tell if the Dragon Web Extension is Enabled
To determine if the Dragon Web Extension
is enabled:
Internet Explorer
1. Open Internet Explorer.
2. Click the cog icon
, and then select Manage add-ons. The Manage Add-ons dialog box opens.
3. Look for the Dragon Web Extension and plugin and ensure the status is Enabled.
If the status is Disabled, do the following to enable it: n
Select the extension. n
Click Enable at the bottom of the Manage Add-ons dialog box. n
Restart the browser.
159
160
Dragon User Guide
Mozilla Firefox
1. Open Mozilla Firefox.
2. Click the Firefox button
The Add-ons Manager appears.
or the Menu icon , and then select Add-ons.
3. Click Plugins and look for the Dragon NaturallySpeaking Plugin.
4. Click Extensions and look for the Dragon Web Extension.
In older versions of Firefox, the Enable option appears rather than Always Activate. Click the Enable button to enable it.
Google Chrome
1. Open Google Chrome.
2. Click the menu icon , and then select Settings. The Settings page opens.
3. Click Extensions. Chrome extensions appear.
4. Look for the Dragon Web Extension and ensure it is enabled.
If it is disabled, select the Enabled check box to enable it.
Resolving problems
If this is the first time you've tried using a supported web application with Dragon, try restarting your browser and reconnecting to the web application.
If you are using a Web application and browser that support the Dragon web extension
, but
the feature is not active, see If you have problems using Web application support
.
If you can't use the Dragon web application, such as if you are using a Web application or browser that is not supported, you cannot click page elements by voice. In addition, Full Text
Control is not available for dictation in the browsers and Web applications. Without the
Dragon web extension installed and enabled, you'll need to click Web page elements using your mouse and keyboard, and dictate content using the Dictation Box.
For more information, see Using the Dictation Box
and Dictating email and Web addresses .
Chapter 19: Working with Web applications
Using Web-based Email
To write email using a web-based email program, you must have installed the Dragon web
allows you to use Full Text Control
in supported browsers and most Web applications to help you perform common tasks by voice. For example, you can say "Click Link", "Click Button", or "Click Inbox" to click the elements on the page. If you do not install the Dragon web extension, you cannot click page elements by voice. In addition, Full Text Control is not available for dictation in the browsers and Web applications. Without the Dragon web extension enabled, you'll need to click Web page elements using your mouse and keyboard, and dictate content using the Dictation Box.
Note: This topic applies to web-based email programs only. For information on using Dragon with other email programs, such as Microsoft Outlook, see
Before you begin
Before you begin, make sure n
The Web extension is enabled if you are using Internet Explorer, Google Chrome or
Mozilla Firefox. Please see How to tell if Web application support is active
.
n
You have your email Web application open and you are logged in.
n
If you're using Gmail, you're using Gmail's latest interface layout. Dragon's Gmail support only works with the newest Gmail interface and not with Gmail "Classic."
Writing e-mail messages
Use the following steps to write e-mail messages.
1. To start a new message, say "Click New" or "Click Compose," as required.
2. Do the following: n
Say "Click Text Field", and then say "Choose X", where X is the number next to the
To field. Then, Dictate the e-mail address of the person you'll be sending the message to.
If you see a list of suggested addresses, choose one from the list by saying "Choose
<n>," where <n> is the number shown for the address you want to use. If the address is not in the list, continue dictating the address.
n
Say "Click Text Field", and then say "Choose X", where X is the number next to the
Subject field. Then, dictate your subject text. n
Say "Click Text Field", and then say "Choose X", where X is the number next to the
Body field. Then, dictate your message.
3. Say "Click Send".
Using commands
The Dragon Web Extension adds the following voice commands to most email web
applications. See also Editing text in a supported Web application .
161
162
Dragon User Guide
To
Show all places on the page where you can enter text
Show all text fields on the page
Show all check boxes on the page
Show all images on the page with links
Show all buttons on the page
Show all links on the page
Show all radio buttons on the page
Show all boxes on the page with lists of choice
Open a list of choices
Close a list of choices
Choose an entry from a list of choices
Say
"Click Type Text" or
"Click Edit Box"
"Click Text Field"
"Click Check Box"
"Click Image"
"Click Button"
"Click Link"
"Click Radio Button"
"Click List Box
"Show Choices"
"Hide Choices
"Choose <text>," for example, "Choose
Hardware Compatibility Guide." Saying
"Choose" is optional.
Using Dragon's Web capabilities without the Dragon Web Extension
If the Dragon Web Extension isn't available for your Web browser or Web application, you
cannot click page elements by voice. In addition, Full Text Control is not available for dictation in the browsers and web applications. Without the Dragon web extension installed and enabled, you'll need to click web page elements using your mouse and keyboard, and dictate content using the Dictation Box.
When Dragon notices that you are dictating in an unsupported application, it opens the
You can also use keyboard commands
such as “press Alt d,” “press Enter,” “press tab,”
“press F5,” “page down,” and commands for clicking and dragging the mouse
, such as
“MouseGrid 3,” “mouse right-click.”
For more information about Dragon's Web capabilities, see Working with a Web browser
.
Editing text in a supported Web application
Use this topic for examples of how you can edit text in any of the Web applications that
Chapter 19: Working with Web applications
In supported browsers, you'll have Full Text Control
, so that you can dictate content and use a broad range of Dragon commands. You'll also be able to navigate between mail fields and perform common tasks like "Click Inbox" and "Click Compose."
163
164
Editing text
Dragon User Guide
Chapter 19: Working with Web applications
To
Delete the last text Dragon entered
Correct selected text or the last text Dragon entered
Spell a word to add it to the vocabulary
Return the cursor back to where you last placed it in documents and e-mail messages
Correct the previous correction
Correct the next correction
Train Dragon about how you pronounce a new word
Hyphenate selected words
Hyphenate a string of words
Say
Scratch That
Correct That
Spell That
Go Back
Correct Previous
Correct Next
Train That
Compound Selection
Compound <text> through <text>
(North America)
Compound <text> to <text> (Outside the U.S. and Canada)
Insert Before That Inserts selected text before the last text that Dragon entered
Inserts selected text after the last text that Dragon entered
Inserts selected text before some text that you quote from your existing content
Inserts selected text after some text that you quote from your existing content
Insert After That
Insert Before [text]
Insert After [text]
165
166
Dragon User Guide
To
Selecting text
Select text you specify in your document
Selects the next text item, such as the next word, line or paragraph , or the next
instance when there are multiple text matches
Selects the previous text item, such as the next word, line or paragraph
, or the next
instance when there are multiple text matches
Selects the next text item, such as the next word, line or paragraph , or the next
instance when there are multiple text matches
Select the last text you dictated
Say
Select
<text>
Select
Again
Select
Previous
Select
Next
Select
That
Capitalizing text
To Say
Capitalize the first letter of each word in the last text you dictated Cap That
APPLY ALL UPPERCASE All Caps That apply all lowercase
Capitalize the first letter of each word in selected text
Apply all capital letters to text you have selected
Makes all capital letters lower case in selected text
No Caps That
Cap Selection
All Caps Selection
No Caps Selection
Using Dragon's Web capabilities without the Dragon Web
Extension
If the Dragon Web Extension isn't available for your Web browser or Web application, you
cannot click page elements by voice. In addition, Full Text Control is not available for dictation in the browsers and web applications. Without the Dragon web extension installed and enabled, you'll need to click web page elements using your mouse and keyboard, and dictate content using the Dictation Box.
When Dragon notices that you are dictating in an unsupported application, it opens the
Chapter 19: Working with Web applications
You can also use keyboard commands
such as “press Alt d,” “press Enter,” “press tab,”
“press F5,” “page down,” and commands for clicking and dragging the mouse
, such as
“MouseGrid 3,” “mouse right-click.”
For more information about Dragon's Web capabilities, see Working with a Web browser
.
If you have problems using Web application support
If you're having problems using Dragon with a supported Web application
, this topic can help you identify the cause and find a solution.
Is the Web application supported in your browser?
The Dragon Web Extension is available in the following Web browsers and versions:
n
Microsoft Internet Explorer, version 9, 10, and 11, both 32-bit and 64-bit n
Mozilla Firefox version 24 and later n
Google Chrome
Important: The makers of Firefox and Chrome frequently release new versions of their browser. For the latest details on Dragon functionality with a particular application, please
see the Technical Support page for Dragon on the Nuance website.
If you don't have one of these browsers in the version listed, you cannot click page elements by voice. In addition, Full Text Control is not available in the browsers and Web applications.
You'll need to click page elements manually (or using MouseGrid and mouse commands) and, if you want Full Text Control, you'll need to use the Dictation Box.
Important
to perform such actions by voice, you must use mouse commands or press commands such as “press F5”.
Feature support
The feature is not supported in the following modes: n
Chrome's Incognito mode n
Chrome's Metro mode n
Firefox's Metro mode
Is the feature active?
To determine whether the feature is active, see How to tell if Web application support is active.
Do you need to re-install?
To use all of Dragon's functionality in your browser, you must enable Dragon's web extension. If you did not enable the extension, open the browser you want to install to use the following links while in that browser:
Internet Explorer: https://dnsriacontent.nuance.com/13/addons.html?lang=ENX&browser=ie
167
168
Dragon User Guide
Chrome: https://dnsriacontent.nuance.com/13/addons.html?lang=ENX&browser=chrome
Firefox: https://dnsriacontent.nuance.com/13/addons.html?lang=ENX&browser=firefox
Is your browser extension or plug-in enabled?
Your Dragon installation includes extension and/or plug-in and files that Web browsers use to provide you with full text support. If you are having trouble, make sure the Dragon web extension is enabled for the browser you are using. Typically, you can do this from a Tools or
Options menu. After enabling the Dragon web extension, restart your browser. For details,
see Enabling Web application support .
Be careful when you upgrade!
When you upgrade Firefox, make sure you choose to keep the Dragon web extension active
when prompted, or Firefox will automatically disable it. If this happens, you can re-enable it
.
If you were running Internet Explorer 8 when you installed Dragon and you upgrade to
Internet Explorer 9, you need to install the Dragon web extension. To do so, go to your original Dragon installation file (typically this is located on a DVD) and launch setup.exe.
When you see the installation wizard, select the Repair option and click Next.
Could there be an issue with the site?
Changes a site makes to its layout or functionality can cause compatibility problems for
Dragon. We make every effort to keep up with these changes, but if you encounter difficulties, please contact Dragon NaturallySpeaking Support .
Are you using a different language?
To use the Dragon Web Extension
, you must set the language of the Web application to the same language as your the user profile. If your profile is set up in English, you must have your
Web application set up in English. The Dragon web extension does not require that your Web
If you want to work in a different language, you can create another user profile with that language and load it into Dragon when you need it.
Is the Dictation Box behaving in an unexpected way?
Sometimes the Dictation Box misunderstands the context of what you're working on and it displays text you didn't dictate, and that you can't edit. This can happen when the focus of the application you're using is on a field you can't edit and: n you intentionally open the Dictation Box, or n you speak into your microphone, prompting the Dictation box to open automatically
For example, if you have your e-mail application open with an item in your message list selected, the Dictation Box may display the header text of that message.
If this happens, just go to the Dictation Box and say or click "Cancel" to close it.
Are you trying to play back dictation?
To play back dictation in Web applications, please use voice commands such as "Play that back," "Read that," and "Read selection." In Web applications, Dragon does not support playback of dictation using menus and buttons.
Chapter 19: Working with Web applications
Playback restricted to the current field
In a Web application like Gmail or Hotmail/Outlook.com, playback is limited to the current dictation for the current field. This means that when you move to another field, you can no longer play back dictation for previous fields, even if you go back to them.
For example, if you dictate an address in a message's To field and then you go to the Subject field, you can't play back dictation for the To field. If you return to the To field and dictate another address, you can play back the new dictation but not the original dictation.
Are you working offline?
Offline mode is not supported for working with Web-based documents.
Are you having trouble opening the Correction menu?
Dragon does not currently support the following methods for opening the Correction menu when working in Web applications n
Using the hot keys. By default, this is the Minus key (-) on the numeric keypad n
Double-clicking on selected text n
Clicking the Correction button on the Classic DragonBar Extras toolbar
169
Chapter 20: Working with Web browsers
Chapter 20: Working with Web browsers
This section contains the following topics:
Working with a Web browser
Dragon includes many commands designed to enable you to surf the Web by voice in
Microsoft Internet Explorer, Mozilla Firefox, and Google Chrome. When you open the browser and a valid user profile is loaded, a prompt appears the first time you open the browser after Dragon installation, providing information on installing the Dragon web extension.
The Dragon web extension allows you to use Full Text Control
for dictation in browsers and web applications and to click page elements, such as buttons and links, by voice. If you do not install and enable the Dragon web extension, you cannot click page elements by voice.
In addition, Full Text Control is not available for dictation in the browsers and Web applications. Without the Dragon web extension, you'll need to click Web page elements using your mouse and keyboard, and dictate content using the Dictation Box.
Important: Please keep in mind that Dragon’s capabilities differ among Web browsers, both in terms of commands and in terms of text control. Note in particular: n
For Chrome, Dragon has no commands such as “go to Address bar”, “go home”,
“refresh page”, etc. However, remember that you can take advantage of Dragon’s global command capabilities: mouse-related commands (such as “MouseGrid 3 9”,
“mouse click”, and “move mouse upper left”) and key-pressing commands (such as
“press Alt d”, “press Enter”, “press control t”, “press tab”, “press F5”, “press Escape”,
“page down”).
The following topics cover various Web-related capabilities:
About the Dragon Web Extension
171
172
Dragon User Guide
In the Dragon Help, see:
Following links and clicking buttons
Specifying Web addresses
Going to text boxes and selecting check boxes and option buttons
Notes
n
You cannot select icons on the toolbar, Java ™ or ActiveX ® applets, or items in the
History, Search, or Channels panels by voice. You also cannot select icons in Adobe
Flash Player.
n
The "Enable commands in HTML windows" box must be selected on the Commands tab of the Options dialog box to use Internet Explorer and Firefox commands.
n
You can use the same voice commands that you use with Internet Explorer to navigate in other applications that run within an HTML window. This includes Help windows based on HTML, such as this Help topic.
n
On some versions of Windows, you can control Internet Explorer menus and dialog boxes by voice only if the "Voice-enable menus, buttons, and other controls, excluding" box is selected on the Miscellaneous tab of the Options dialog box.
n
On some versions of Windows, Microsoft Active Accessibility should be installed before using voice commands with Internet Explorer. If Microsoft Active Accessibility is not installed, you must always start Dragon before you start Internet Explorer. If Internet
Explorer is already running, close it, start Dragon, and then restart Internet Explorer.
Web browser commands
Important: Please keep in mind that Dragon’s capabilities differ among Web browsers, both
in terms of commands and in terms of text control. See Working with a Web browser
.
Text in italics represents words or numbers that can change.
Chapter 20: Working with Web browsers
Starting your browser
To Say
Start Internet Explorer "Start Internet Explorer"
"Start Microsoft Internet Explorer"
Start Mozilla Firefox "Start Firefox"
"Start Mozilla Firefox"
Start Google Chrome "Start Google Chrome"
"Start Chrome"
Instead of "start," you can also say "open," "launch" or "show.
Navigating the Web
Please note that not all of these commands work in all browsers. See the Command
Browser for more information.
173
174
Dragon User Guide
To
Move the insertion point to the Address Bar
Go to the URL in the
Address Bar
Refresh the current page from the Web
Click a button
Say
"Go to Address Bar"
(Internet Explorer and Firefox only. For Chrome, you can say
"press Alt d.")
See also Internet Explorer Commands.
"Click Go" or "Go There"
(Firefox and Internet Explorer only. For Chrome, you can say
"press Enter.")
"Refresh page" or "Reload page"
(Firefox and Internet Explorer only. For Chrome, you can say
"press F5.")
"Click" followed by all or part of the button name.
If there are multiple matches, Dragon displays a number next to each one. Say the number of the button you want to click. A red arrow points to your choice and then Dragon clicks it.
Click a link that is a word or phrase
Click on an image that is a link
"Click" followed by the link text or part of the text.
If there are multiple matches, say the number of the link you want to click, or say the text for the link. A red arrow highlights your choice and then Dragon opens the link to the associated Web page.
Say "Click" and the text that appears when the mouse pointer moves over the image, for example, "Click Dragon" if "Dragon" is the text that appears.
"Stop Loading" (Firefox and Internet Explorer only) Stop loading a Web page
Load the previous page in the history list
Load the next page in the history list
Load your home page
"Go Back" (Firefox and Internet Explorer only)
"Go Forward" (Firefox and Internet Explorer only)
"Go Home" (Firefox and Internet Explorer only)
Open a browser tab in a new browser window
"Open this in a new window" (Firefox and Internet Explorer only)
Open a currently displayed
Web page in another browser tab that stays in the background
"Open this in a background tab" (Firefox and Internet Explorer only)
"Open this in a new tab"
Chapter 20: Working with Web browsers
To
Activate the Favorites and
RSS icon in IE9, 10, and 11
Using tabs
Say
"Click Favorites" (Firefox and Internet Explorer only)
To
Open a new tab
Close the tab
Go to the next tab
Say
"Add a New Tab"
"Open a New Tab"
"Create a New Tab" or
"press control t"
"Close This Tab" or
"press control w"
"Go to the Next Tab"
"Switch to the Next Tab"
"Move to the Next Tab"
Go to the previous tab "Go to the Previous Tab"
"Switch to the Previous Tab"
"Move to the Previous Tab"
Go to the first tab
*These commands don’t work in
Firefox. They work in Chrome and
Internet Explorer only.
Go to the last tab
*These commands don’t work in Firefox.
They work in Chrome and Internet Explorer only.
"Go to the First Tab"
"Switch to the First Tab"
"Move to the First Tab"
"Go to the Last Tab"
"Switch to the Last Tab"
"Move to the Last Tab"
Go to the [nth] tab
*These commands don’t work in Firefox.
They work in Chrome and Internet Explorer only.
"Go to the Third Tab"
"Switch to the Third Tab"
"Move to the Third Tab"
Bookmark all open tabs "Bookmark All Tabs" (Chrome and Firefox only)
Clicking page elements and entering text
The Dragon Web Extension allows you to click the elements on the page, such as buttons
and links, by voice. If you do not install and enable the Dragon web extension, you cannot click page elements by voice; in addition, Full Text Control is not available for dictation in the
175
176
Dragon User Guide
browsers and Web applications. Without the extension, you'll need to click Web page elements using your mouse and keyboard, and dictate content using the Dictation Box.
To use the commands below, you'll need to install the extension for your browser. For more
information, see Installing and enabling the Dragon Web Extension
.
To
Show all places on the page where you can enter text
Show all check boxes on the page
Show all images on the page with links
Show all buttons on the page
Show all links on the page
Show all radio buttons on the page
Show all boxes on the page with lists of choices
Open a list of choices
Close a list of choices
Choose an entry from a list of choices
Say
"Click Type Text" or
"Click Edit Box" or
"Click Text Field"
"Click Check Box"
"Click Image"
"Click Button"
"Click Link"
"Click Radio Button"
"Click List Box"
"Show Choices"
"Hide Choices"
"Choose <text>," for example, "Choose
Hardware Compatibility Guide." Saying
"Choose" is optional.
Notes
You can use most text selection commands when you work with text that you enter in a Web form.
Use the "Choose <n>" command listed under Navigating the Web
to select among multiple choices.
Chapter 20: Working with Web browsers
Moving around a Web page
To
Move the page down by a screen
Move the page up by a screen
Move down to the bottom of the page
Move up to the top of the page
Move the page down by a few lines of text
Move the page up by a few lines of text
Display the top of the current page
Display the bottom of the current page
Start automatic downward scrolling
Start automatic upward scrolling
Stop automatic scrolling
Increase the rate of automatic scrolling
Decrease the rate of automatic scrolling
Say
"Page Down"
"Page Up"
"Scroll Down"
"Scroll Up"
"Line Down"
"Line Up"
"Go To Top"
"Go To Bottom"
"Start Scrolling Down"
"Start Scrolling Up"
"Stop Scrolling"
"Scroll Faster"
"Scroll Slower"
Internet Explorer commands
The following commands are specific to Internet Explorer. See also the Dragon Learning
New commands for Internet Explorer 9 and 10
Dragon provides voice support for pinning Web sites or specific Web pages to the Windows
Start menu. (Then, when you open the site or page from there, it displays as a separate browser icon on the Windows taskbar.)
To pin a Web site or page to the Start menu
1. Say "Pin this [web] site | page to Start menu." A dialog box displays, where you can update the address for the Web page to be added.
Note: If you are using Windows 8 machine and IE 10, the command is "Pin this [web] site
| page to Start Screen". Using this command adds an icon of the site to the Start Screen.
2. Say or click "Add" to complete the command.
177
178
Dragon User Guide
Internet Explorer 9, 10, and 11 support entering Web search terms in the same box that displays the URL of the page you are viewing. The box is called the One Box or Address Bar.
To move the cursor to the One Box
n
Say "go to the One Box."
Notes
Home button and Home menu
Internet Explorer 9 has both a Home button , which displays in the top-right corner of the browser window, and a separate Home menu, available from the Command bar as shown here:
If both are displayed, Dragon usually recognizes the Home button when you say the "Home" command.
Tools menus
Internet Explorer 9 has a main Tools menu, which displays when you click the cog icon in the top-right corner of the browser window, and a secondary Tools menu on the Command bar.
If both are displayed, Dragon usually opens the main Tools menu when you say the "Tools" command.
Using Quick tabs
n display quick tabs n hide quick tabs n unhide quick tabs n open quick tabs n show quick tabs n turn quick tabs on n turn quick tabs off n view quick tabs
Using feeds
n open feeds n close feeds n show feeds n display feeds n view feeds n hide feeds n unhide feeds
n toggle feeds n switch to feeds
Chapter 20: Working with Web browsers
179
Chapter 21: Working on Your Desktop
Chapter 21: Working on Your
Desktop
This section contains the following topics:
Using Windows Desktop commands
Selecting buttons and dialog box options
Selecting tabs in a dialog box
Scrolling in windows and lists
Switching between programs and windows
Starting and exiting programs
Use the following voice commands to open programs that appear anywhere on your Start menu or your Desktop (even when the Start menu or Desktop are not visible).
Attention
The ability to open a desktop or Start menu item by name at any time is an option. Turning it off can reduce computer memory use and eliminate misrecognitions of dictation as commands. See Enable launching from the Start menu in the Dragon Help.
To start a program
Say "Start" followed by the program name.
Instead of "start," you can also say "open," "launch" or "show." For example, say "open
Notepad."
Shorter names for popular programs
For the popular Windows programs listed here, you can use shorter program names in addition to the standard program label shown on the Start menu or under the program icon on the Desktop. For other programs you'll need to say the standard program label.
n
MS Word, Microsoft Word, Microsoft Office Word n
MS Excel, Microsoft Excel
181
182
Dragon User Guide
n
MS Outlook, Microsoft Outlook n
MS PowerPoint, Microsoft PowerPoint n
MS Access, Microsoft Access n
MS InfoPath, Microsoft InfoPath n
Internet Explorer, Microsoft Internet Explorer n
Firefox, Mozilla Firefox n
Chrome, Google Chrome n
Corel WordPerfect, WordPerfect n
Acrobat Reader n
Lotus Notes
Examples:
Say "Start Microsoft Word"
Or
Say "Start Acrobat Reader"
Notes
To start any other programs
To start other Windows desktop programs, you need to know the name of the program shortcut or icon. Say "start" and then the text on the program icon label.
Examples:
Microsoft Visual Basic, listed in Windows like this:
Say "Start Microsoft Visual Basic 2008 Express Edition"
OR
Adobe Acrobat Pro, listed in Windows like this:
Say "Start Adobe Acrobat 9 Pro"
Tip
To simplify start commands or to run programs using names of your choice, you can rename
Desktop icons or create new Windows Shortcuts. See your Windows documentation for details.
To exit a program
With any window that has the active focus on your screen, say "Close Window," or say
"Click Close"
Notes
n
To access some built-in items on the main section of the Windows Start menu, including Shut Down, Help, Run, and the Favorites, Find, and Settings menus, you must say "Click Start" or "Click Start Menu" and then say the menu names you want
Chapter 21: Working on Your Desktop
until you reach the program. For example, to start the Find Files or Folders tool, say
"Click Start" and then "Find Files or Folders." n
In some versions of Windows you must close any open applications before you can use the voice command "Shut Down Windows" to exit Windows.
n
On some versions of Windows, you can control Internet Explorer menus and dialog boxes by voice only if the "Voice-enable menus, buttons, and other controls, excluding" box is selected on the Miscellaneous tab of the Options dialog box.
n
To use Dragon to operate Windows menus and dialog box controls by voice, the option Voice-enable menus, buttons and other controls must remain enabled in the
Miscellaneous tab of the Options dialog box. The setting ensures that the Windows
Active Accessibility feature allows voice control of Windows menus and controls. This option is turned on by default.
Using Windows Desktop commands
You can use voice commands to perform many actions on the Windows Desktop, as shown in the table below.
Notes
n
Instead of dictating the verb "open," you can also say "start," "launch" or "show." For example, say "start Notepad." n
For details about how to say program names, see Starting and exiting programs .
n
See About the Command Browser for more variants of all commands listed here and
see Creating new commands in the Dragon Help for information about how to create your own commands.
n
Items in square brackets are optional.
183
184
Dragon User Guide
To do this
Open Windows special folders
Open your My Computer window
You can say
"Open My Computer"
Open your My Documents folder "Open My Documents"
Open your My Pictures folder "Open My Pictures"
Open your My Music folder
Open your My Videos folder
"Open My Music"
"Open My Videos"
Start applications and utilities
Start a program by name "Open <program name>"
Note: This command can be turned off to reduce computer memory use and eliminate misrecognitions of dictation as commands. See Enable launching from the Start menu in the
Dragon Help.
"Open Windows Explorer"
"Open Windows Help"
Open Windows Explorer
Open Windows Help and
Support Center
Open the Windows Task
Manager
Open the Windows Run dialog box
Open the Windows System
Configuration Utility (msconfig)
"Open Task Manager"
"Open Run dialog"
"Open System Configuration Utility"
Open the Windows Control
Panel
Open the Windows Print
Manager
Add a printer to your Windows system
"Open Control Panel"
"Open Print Manager"
"Add a new printer"
Add or remove programs to your
Windows system
"Open Add or Remove Programs window"
Chapter 21: Working on Your Desktop
To do this
Change the Windows Display
Settings
Change the Windows screen resolution
Change Windows Power
Settings
Navigate between windows
Switch between windows
You can say
"Change Display Settings"
"Change screen resolution"
"Change power settings"
Switch to a specific program or document
"List programs" or "List all windows" or "List windows for
Dragon" and then "Choose n," where n is the number of the window you want to switch to. For example, say "Choose 2"
OR
"Switch to previous window"
OR
"Switch to next window."
"Switch to <program name>" For example, say "Switch to
Microsoft Word"
OR
"Switch to <document name>"
OR
"List windows for <program name>" See Switching between programs and windows
Work with windows
Enlarge the active window to the size of your monitor's screen
"Maximize window"
Minimize the active window
Close the active window
Minimize all windows and display the Windows Desktop
"Minimize window"
"Close window"
"Show Desktop"
"Minimize [all] windows"
Return a maximized window to its original size
"Restore window"
Restore all minimized windows "Restore [all] windows"
185
186
Dragon User Guide
Controlling menus
You can open, close, and choose items from the menus in most programs by voice. To control the menus in a window, the window must be active.
To open a menu
Say one of the following:
"Click" followed by the name of the menu.
Just say the menu name.
Example:
"Click File" or "File"
Dragon's default setting is to require that you say "Click" to select menus and controls. See
Require "Click" to select menus Require "Click" to select menus in the Dragon Help.
To choose an item from an open menu
Just say the item (you can still say "Click" but Dragon doesn't need you to).
Example:
If the File menu is open, say "New"
To close a menu
Say "Cancel"
Notes
n
Say "Click Start Menu" or "Click Start" to open the Start menu. You must say "Click" to open the Start menu. By default, you must say "Click" before the name of menus in commands. To change the setting, see Require "Click" to select menus Require "Click" to select menus in the Dragon Help.
n
Saying "Cancel" is equivalent to pressing the ESC key.
n
In some versions of Windows, a feature called Active Accessibility allows you to control certain windows menus and controls by voice. If your version of Windows supports
Active Accessibility, the "Voice-enable menus, buttons, and other controls, excluding" option on the Miscellaneous tab of the Options dialog box must be on in order to use voice commands to control menus. When you first install Dragon, this option is on by default.
Selecting buttons and dialog box options
You can select buttons and dialog box options by voice.
The dialog box must be the active window.
To select a button, checkbox or option
Say "Click" followed by the name of the button or other control, as it appears in the window.
Chapter 21: Working on Your Desktop
Saying "Click" before the name of the button required. If you want to make it optional you can specify that "Click" ought not be spoken on the Commands tab of the Options dialog box.
To open a list
If the list is selected (the item displayed is highlighted), say "Expand List" or "Drop List." If the list is not selected say the name of the list. To open the next list, say "Press Tab" and then either "Expand List" or "Drop List."
To click the Close or OK buttons
Say "Close" or "Click Close," "OK" or "Click OK."
Notes
n
You cannot say the following items: file names in dialog boxes, folder names in dialog boxes, names of items within list boxes, and toolbar icons.
n
On some versions of Windows, you can control Internet Explorer menus and dialog boxes by voice only if the "Voice-enable menus, buttons, and other controls, excluding" box is selected on the Miscellaneous tab of the Options dialog box.
Selecting tabs in a dialog box
You can select tabs on a tabbed dialog box (such as the Options dialog box in Dragon) in the following manner:
To Say
Select the next tab "Move to Next Tab"
"Go to Next Tab"
"Click Next Tab"
Select the previous tab "Move to Previous Tab"
"Go to Previous Tab"
"Click Previous Tab"
Note
If the tab has a caption with a shortcut key (underlined character) you can say "Click" followed by the name of the tab.
Resizing and closing windows
You can resize and close windows by voice.
To resize a window
1. Make the window you want to resize active.
2. Say "Maximize Window," "Minimize Window," or "Restore Window."
187
188
Dragon User Guide
To close a window
1. Make the window you want to close active.
2. Say "Close Window."
Note
These commands only work when you are using an English version of your operating system.
If you have a different version of the operating system, you must say "Click" and the command used by that system in place of "Maximize," "Minimize," or "Restore."
Selecting and opening icons
You can select icons on the Desktop in the following manner:
To select a desktop icon
1. Point to the Windows desktop and say "Mouse Click" to make the desktop active.
2. Say the name of an icon. For example, "My Documents."
The icon becomes highlighted to indicate that it is selected.
3. To select another icon, say "Move" followed by a direction (Left, Right, Up, or Down) and the number of icons (up to 20) you want to move. For example, "Move Right 1" or "Move
Up 3."
You can open icons on the desktop in the following manner:
To open a desktop icon (including an application)
1. Point to the Windows desktop and say "Mouse Click" to make the desktop active.
2. Say "Open" and the name of an icon. For example, "Open My Documents."
You can close an open window in the following manner:
To close an open window
1. Point to the open window and say "Mouse Click" to make the window active.
2. Say "Close Window."
Scrolling in windows and lists
With Dragon you can scroll within a window or list in a dialog box.
To scroll vertically
Make sure the insertion point is in the list of a dialog box and say "Move Down" or "Move
Up" followed by the number of lines (up to 20) you want to scroll. This presses the Up or
Down Arrow key the number of times you specify. You can also say "Page Up" or "Page
Down" to press the Page Up or Page Down key.
Examples:
"Move Up 10"
"Move Down 4"
Chapter 21: Working on Your Desktop
"Page Up"
To scroll horizontally
If the list or window has a horizontal scroll bar, make sure the insertion point is in the list or dialog box and say "Move Left" or "Move Right" followed by a number up to 20. This presses the Left or Right arrow keys the number of times you specify.
Examples:
"Move Left 10"
"Move Right 5"
Note
You can use these commands to scroll Help windows by voice.
Switching between programs and windows
Use this procedure to do any of the following: n
List and switch between open programs or windows.
n
List and switch between windows of multi-document applications. n
List and switch between open Dragon windows.
Note
You can use this command to switch to your Web browser, but this command does not list
open tabs in your web browser. For information on browser tabs, see Working with a Web
To switch between open programs or windows
1. Do any of the following:
To list all open programs, say "List Programs" or "List all windows." The List of Open
Applications window opens. For example,
189
Dragon User Guide
Or
To list open windows of multi-document applications, say "List windows for <program
name>" For example, say "List windows for Microsoft Word" The List of Windows opens.
For example,
190
To list all open Dragon windows, say "List windows for Dragon" or "List Dragon windows".
The list of Dragon windows opens. For example,
Chapter 21: Working on Your Desktop
For information about dictating program names, see Starting and exiting programs .
191
192
Dragon User Guide
2. To switch to an open program or window:
Say "Choose n," where n is the number of the program or window you want to switch to, or just say the number next to the word. For example, say "Choose 2" or "2"
OR
Choose the number of the program or window from the list and click OK.
Chapter 22: Controlling the Mouse and Keyboard
Chapter 22: Controlling the
Mouse and Keyboard
This section contains the following topics:
Positioning the mouse pointer with MouseGrid
Clicking and dragging the mouse
Controlling the keyboard
When Dragon is running, you can control the keyboard by voice.
193
194
Dragon User Guide
Say
"Press"
Then say
"Tab"
"Press Key" "Backspace"
"Type" "Caps Lock"
"Enter"
"Escape"
"Space Bar"
"Print Screen"
"Scroll Lock"
"Pause"
"Num Lock"
"Up Arrow"
"Down Arrow"
"Right Arrow"
"Left Arrow"
"Home"
"End"
"Page Up"
"Page Down"
"Insert"
"Delete"
"Function 1" to "Function 12"
"Keypad" followed by any numeric keypad key: 0...9, ., /, *, -, +, Enter).
"Shift," "Control," or "Alt" (alone or in combination) followed by any other key.
Chapter 22: Controlling the Mouse and Keyboard
Notes
n
You can say "Press" or "Type" followed by any combination of modifier keys (Shift,
Control, Alt), and then any letter, number, symbol, arrow key, and so on.
n
You can say "Press Tab" to move around a dialog box or a list and "Press Enter" to select items.
n
You cannot undo a keystroke by saying "Scratch That." For example, if you say
"Press Cap A" then "Scratch That," "A" remains in the document. You can, however, say "Undo That."
Moving the mouse pointer
You can move the mouse pointer up, down, left, or right using the mouse pointer commands.
Move commands
The following commands are always available and can move the pointer a short distance (up to 10 units):
Say Then say Then say
"<1—10>" "Mouse" "Up"
"Down"
"Left"
"Right"
Examples:
"Mouse Down Two"
"Mouse Right Eight"
Optional move commands
You can use the following movement commands if the "Enable mouse motion commands" box on the Commands tab of the Options dialog box is selected.
195
196
Dragon User Guide
Say Then a direction Then a speed (optional)
"Move Mouse" or "Up" "Faster"
"Mouse Move" "Down" "Very Fast"
"Left"
"Right"
"Upper Left"
"Much Faster"
"Slower"
"Very Slow"
"Lower Left"
"Upper Right"
"Lower Right"
"Much Slower"
You can say a speed command at any time while the pointer is moving to speed the movement up or slow it down.
Examples:
"Move Mouse Down Faster"
"Mouse Move Lower Right Very Fast"
"Mouse Move Up Very Fast (pause) Slower (pause) Stop"
Stopping mouse movement
While the mouse pointer is moving, you can stop the movement by saying one of the following commands: n
"Stop" n
"Cancel"
Notes
n
You can combine moving the mouse pointer with clicking the mouse or marking and dragging the object in a single voice command.
n
You can disable the mouse motion commands by clearing the check box "Enable mouse motion commands" on the Commands tab of the Options dialog box .
n
The default mouse motion speed is 2 (on a scale from 1 to 25). You can change the default speed by clicking the Speed button on the Commands tab of the Options dialog box and selecting a new speed.
Positioning the mouse pointer with MouseGrid
You can position the mouse pointer anywhere on the screen using MouseGrid. The movement can be relative to the full screen or the active window.
Chapter 22: Controlling the Mouse and Keyboard
To position the pointer with MouseGrid
1. Say "MouseGrid" to place the MouseGrid over the full screen or say "MouseGrid Window" to place it over the active window.
MouseGrid divides the screen or window into nine numbered areas.
2. Say the number (from 1 to 9) to position the pointer in that numbered area. To position it again, say another number.
You can pause slightly after each number you say.
Examples:
"MouseGrid 3 2 5"
"MouseGrid Window 7 8"
Notes
n
To have MouseGrid close automatically, end the MouseGrid command with "Go." For example, say "MouseGrid 5 3 Go." n
To undo the last MouseGrid action, say "Undo That." n
To close MouseGrid, say "Cancel." n
MouseGrid will close when the microphone is turned off, or when you say the command "Go To Sleep." n
You can combine the MouseGrid command with clicking the mouse or marking and dragging the object in a single voice command. For example, you can say "MouseGrid
5 3 Double-Click."
Clicking and dragging the mouse
You can click and drag the mouse by voice.
197
198
Dragon User Guide
Clicking the mouse
Say
"Mouse"
Then say
"Click"
"Double-Click" –
"Right-Click" –
–
"Left-Click"
"Press" or "Type" "Shift"
Then say
–
"Right Click"
"Left Click"
"Control" "Right Click"
"Left Click"
Examples:
"Mouse Double-Click"
"Mouse Right-Click"
"Press Shift Right Click"
"Type Control Left Click"
Dragging the mouse
You can use the following movement commands if you select the Enable mouse motion commands check box on the Commands tab of the Options dialog box.
Chapter 22: Controlling the Mouse and Keyboard
Say
"Drag Mouse" (to move)
"Mouse Drag" (to move)
"Control Mouse Drag" (to copy) or
"Control Drag Mouse"
Then a direction Then a speed (optional)
"Up" "Faster"
"Down" "Very Fast"
"Right"
"Left"
"Upper Right"
"Upper Left"
"Lower Right"
"Lower Left"
"Much Faster"
"Slower"
"Very Slow"
"Much Slower"
You can say a speed command at any time while the pointer is moving to speed the movement up or slow it down.
Examples:
"Drag Mouse Down Faster"
"Mouse Drag Lower Right Very Fast"
"Mouse Drag Up Very Fast (pause) Slower (pause) Stop"
"Shift Drag Mouse Up"
Stopping mouse movement
While the mouse pointer is moving, you can stop the movement by saying one of the following commands: n
"Stop" n
"Cancel"
Notes
n
You can combine dragging the mouse pointer and clicking the mouse. For example, to open an application from the Desktop, you can say "Mouse Drag Lower Left" and when the Desktop icon is selected, say "Double-Click." n
You can disable the mouse motion commands by clearing the check box "Enable mouse motion commands" on the Commands tab of the Options dialog box.
199
Chapter 23: Improving recognition accuracy
Chapter 23: Improving recognition accuracy
This section contains the following topics:
Top 10 ways to improve accuracy
Here's our top 10 list of ways to optimize Dragon's ability to recognize your speech.
1. Use careful dictation practices Dictating with Dragon is different than talking to someone. When we talk, we often hesitate, mumble, slur words, or leave words out altogether, but we're still able to understand each other. And people can easily filter out noise, which lets us understand each other, even in noisy environments, like restaurants, but speech software needs help separating dictation from other sounds. With dictation, the idea is to speak in a consistent speed and volume - try not to hesitate, exaggerate your pronunciation, or talk loudly or slowly. So make sure background noise doesn't drown you out and that you have the microphone close enough for Dragon to hear you properly, usually about an inch from your mouth and to one side. Also, remember to dictate using complete phrases, so that Dragon gets the context. For example, we use our experience and common sense to decide whether someone said "I Scream," or "Ice
Cream." But Dragon doesn't understand what words mean, so it can't use common sense the way we do. Instead, Dragon interprets your speech by using its knowledge of words that tend to appear together. Dragon calculates how frequently you use words and phrases and can offer you suggestions when it makes mistakes. Try to think about your whole phrase or sentence before you start dictate it, and you'll be on your way to dictation
mastery. For more information, see Dictation Basics
.
2. Import lists of words or phrases Rather than adding words or phrases one at a time, you
can import one or more lists. The lists can even include spoken forms . This method can
be particularly useful for businesses that have a lot of people dictating similar names or
words or if you need to use more than one user profile
. For more information, see
Preparing a list of custom words to add to a Vocabulary.
3.
You can select specific documents or entire folders
containing typical documents, your own or those of others, that reflect the type of dictation you will typically do. You can then train Dragon how you pronounce unusual words or about proper names you need to dictate. For example, if you were an academic and ran the tool to add words from essays and articles in your field of study, or a blogger using a
201
202
Dragon User Guide
lot of new acronyms, Dragon would automatically learn your words, word frequency and contexts, and make better guesses about your speech. Dragon also moves words from its
backup dictionary to its active vocabulary
based on the scan. If there are a lot of words to train, you'll need to plan this activity when you have a few minutes to spend adding the words.
4.
Similar to Learn from specific documents
, this tool helps refine your profile by analyzing representative text, only in this case it analyzes e-mail messages sent from your installed email program. In addition to analyzing frequency of word use and typical word sequences, it can suggest contact names you may want to add to the vocabulary. Note: For the first run, plan this activity when you can let Dragon use your computer for 5 to 30 minutes. Subsequent scans build on the first one, however, and are much faster.
5.
Run Accuracy Tuning
This process refines your user profile by analyzing audio and text data that Dragon archives from your dictation. You can launch Accuracy Tuning from the
New DragonBar or Classic DragonBar Audio menu or schedule it to run later. Choose a time when your computer is on but you can close Dragon – for example, when you typically have a meal or a meeting.
6. Perform additional training Dragon learns about how you pronounce words and your vocal
tones when you create your user profile
, but it can learn more if you read one or more of the supplied training texts. We recommend you read a training text after a few hours of using Dragon. On the DragonBar, select Audio > Read Text to Improve Accuracy.
7. Turn off what you don't use Visit the Performance Assistant for useful strategies for optimizing accuracy and speed with Dragon. For example, you can turn off the ability to
"voice-click" menus, buttons and other controls in some or all programs, or the ability to open items from the Windows Start menu or desktop . Turning off these options reduces
Dragon's use of computer resources and reduces the possibility of isolated words or phrases being executed as commands, such as "Click Send" or "Open Network."
to have Dragon recognize when you change a custom or built-
in auto-formatting option
for alphanumeric text or a word. Dragon automatically applies formatting to many common spoken forms of text, such as Web and e-mail addresses, street addresses, dates, numbers, units of measure, and so on. The
Smart Format Rules feature recognizes your changes to rules and offers to customize the
settings to suit your needs as you work. You can also add custom word properties to words
to make Dragon's text entry more intuitive and efficient. By setting word properties, you specify a variety of options that can be associated with vocabulary entries. You can specify that a word be preceded or followed by specific characters and customize properties for placement or handling. For example, question marks and exclamation marks have default properties of "Precede by (nothing)" and "Format the next word capitalized."
Or, you can specify one or more for words. If the Alternate printed form checkbox is selected for "meter," when you dictate the word after a number Dragon enters only "m."
For example, if the Alternate form checkbox is not selected, and you dictate "meter,"
Dragon types the full word, "meter."
9. Make corrections You can prevent many errors using the methods listed above, but if an error does happen, correcting it will help Dragon to learn. Redictating or retyping words or phrases are sometimes the fastest approach, but Dragon provides a lot of flexibility about
how and when you correct errors
.
Chapter 23: Improving recognition accuracy
10. Save your
Remember that as Dragon works on your documents with you,
it needs to save what it learns. After you correct dictation, train words, or perform any of the other accuracy optimization operations, save your profile to save your changes for your next session.
Using Smart Format Rules
Smart Format Rules may display when Dragon notices that you corrected dictated text
corresponding to an Auto-Formatting option or Word Property
.
Through this optional feature, Dragon displays reaches out to offer one or more adjustments to its settings.
When Dragon presents a Smart Format Rules box, you can choose one of the adjustments it offers. Or you can just ignore the dialog box and continue working, or say “cancel” and the box will close.
Here is an example of the Smart Format Rule for units of measure that appears if you change the standard abbreviation for kilograms, which is kg:
What to do when a Smart Format Rules box displays
When Dragon displays a Smart Format Rule, you can usually do any of the following: n
If you don't want Dragon to auto-format the text using this rule now and in future dictation, say choose 1 - Never <apply rule>, where apply rule represents the autoformatting rule you changed with your dictation.
n
If you want Dragon to use the same auto-formatting setting the next time you dictate it and in the future, say choose 2 - Always <apply rule>.
n
If you don’t want to adjust any rule, ignore this box. It will go away when you continue dictating or working in your document. You can also say “Cancel” to dismiss the box.
For Smart Format Rules about entering zeros rather than the word "million," for numbers
greater than or equal to 10, and for word properties , the choices are slightly different. The
Smart Format Rules display the applicable choices in those cases. For details and
examples, see Options controlled by Smart Format Rules below.
When the Smart Format Rules box displays
The Smart Format Rules box displays when you edit auto-formatted text using n the Correction menu n the Spelling window
or n the keyboard.
203
204
Dragon User Guide
Showing the last Smart Format Rule
If a Smart Format Rules box displays and you continue dictating or cancel it accidentally, you can redisplay it by saying the command "Show Smart Format Rule." Previously accepted rules can not be displayed.
Disabling Smart Format Rules
If you want to turn off the Smart Format Rules feature,
1. Select Tools menu > Options from the DragonBar. For example, say "Switch to
DragonBar," then "Click Tools," then "Options."
2. On the Options dialog box, Correction tab, say "click Show Smart Format Rules" to clear the checkmark beside the option.
3. Say "Click OK" to close the dialog box and apply your changes.
Restoring a Smart Format Rule
You can restore a default in the Auto-formatting dialog box or Word Properties dialog box.
Another way to restore a setting: correct the text to the format you want and pick the corresponding rule from the Smart Format Rules box that your correction triggered.
Options controlled by Smart Format Rules
Auto-formatting Web and e-mail addresses
Turns on automatic e-mail and Web address formatting, so that you can dictate them as you would normally say them out loud. For example, if you say "jane dot smith at my adventure travel dot com" Dragon enters "[email protected]." Dragon substitutes the @ sign for the spoken "at," uses a period for "dot," and omits spaces. Or if you say "www dot nuance dot com," Dragon enters www.nuance.com
.
Auto-formatting street addresses
Turns on automatic formatting of postal addresses. For example, if you say "49 orchard lane boston massachusetts oh two four four six," Dragon enters "49 Orchard Lane,
Boston, MA 02446."
Certain addresses can be hard for Dragon to interpret. For example, "Two Hundred Forty
Fifth Street" could be interpreted as 245th Street, 200 45th Street, or 240 5th Street. In a situation like this, Dragon uses context to try to determine what you meant. In some cases, using the word "And" can help to narrow down the choices. In the example above, saying
"Two Hundred And Forty Fifth Street" would eliminate 200 45th Street as a possibility.
For user profiles whose region setting is UK or Canada: This option also enables the proper formatting of UK postcodes and Canadian postal codes. For example, you could format a postcode for London by saying "W Two Four R J" to enter W2 4RJ, and format a postal code for Toronto by saying "M Five H Two L Two" to enter M5H 2L2."
See Choose your region and vocabulary in the Dragon Help.
For user profiles whose region setting is United States: If you are using a U.S.
English user profile, you can enable UK postcodes and Canadian postal codes from the
UK and Canadian postcodes option in this dialog box.
See Choose your region and vocabulary in the Dragon Help.
Chapter 23: Improving recognition accuracy
Auto-formatting titles
Inserts abbreviated versions of any title in Dragon's Abbreviated titles list. For example,
"Mr." for "Mister," or "Pres." for "President."
Auto-formatting dates
Controls how Dragon formats dates when you dictate the day, month, and year together.
Use the drop-down button to select the format you want to use most often. Available formats are: n
Dates As Spoken n
Month D, YYYY n
Month DD, YYYY n
Mon D, YYYY n
Mon DD, YYYY n
M/D/YYYY n
M/D/YY n
MM/DD/YYYY n
MM/DD/YY n
MM-DD-YY n
D Month, YYYY n
D/M/YYYY n
D/M/YY n
DD/MM/YYYY n
DD/MM/YY n
DD-Mon-YY n
YYYY-MM-DD
205
206
Dragon User Guide
Notes
n
If you clear the "Dates" checkbox, Dragon will not apply automatic date formatting.
For example, after clearing the checkbox, if you dictate "July twenty seventh,"
Dragon will write "July 27th."
By default, Dragon does not use the numeral form of numbers smaller than 10, whether for cardinal numbers (one, two, three...) or ordinal numbers (first, second, third...). If the "Dates" checkbox is cleared, Dragon writes "the 10th of June" and
"the seventh of June" unless you change the default setting " Numbers, if greater or equal to " on the Auto-Formatting Options dialog box.
n
If you use the "Dates As Spoken" setting, Dragon needs you to dictate dates in an unambiguous way, using the name and not the digit for the month. For example, with "Dates As Spoken" selected, Dragon will correctly format "January eleven two thousand nine" and "the seventh of February two thousand four" using date formats, but will format "eleven one two thousand nine" as a number.
If you dictate dates differently, for example you use digits to say the month, try selecting the value that best matches how you dictate the date. For example, if you normally say "eleven one two thousand nine", setting the date format to
"D/M/YYYY" will cause Dragon to correctly transcribe the date.
n
If you omit the year, for example, you say "July twelve", Dragon transcribes "July
12" ("The twelfth of July" becomes "12 July") regardless of which date formatting you select.
Auto-formatting common abbreviations
Enables Dragon to recognize most standard abbreviations while transcribing your dictation. For example, Dragon would rewrite "versus" as "vs.", "Institute" as "Inst.", and
"Department" as "Dept." For more information about dictating abbreviations, see Dictating abbreviations and acronyms.
Auto-formatting contractions
Enable this option if you want Dragon to expand contractions when you dictate them. For example, if you say "Don't go near the water", Dragon transcribes "Do not go near the water".
If you leave this option turned off, Dragon enters contractions the way you dictate them.
Note: In some situations, the formal expression of a contraction may be ambiguous. For example, the phrase "It's always" could either mean "It is always" or "It has always," depending on the tense of the verb that follows. In this situation, Dragon always expands the contraction, regardless of how this option is set.
Auto-formatting “ million” instead of ” ,000,000”
Enable this option to have Dragon enter the word "million" rather than zeros and commas
(",000,000") when you dictate round numbers in the millions. For example, Dragon enters
"8 million" rather than "8,000,000."
Chapter 23: Improving recognition accuracy
If a number in the millions range is not rounded to the nearest million, Dragon enters the number as digits. For example, if you dictate "eight million one hundred thousand"
Dragon enters "8,100,000".
Auto-formatting numbers, if greater than or equal to
Enters numbers as numerals if they are equal to or greater than the value shown in the drop-down list. If the number is less than the chosen value, the number is spelled out. For example, using the value of "10", Dragon will write "five" when you dictate "five" and "11" when you dictate "eleven".
The available values are: n
0 n
2 n
10 n
100
Note: You can also use Dragon to enter numbers as Arabic or Roman numerals. See
.
Auto-formatting units of measure
Turns on automatic formatting of standard units of measure, such as feet and inches. For example, if you say "Six Foot Three Inches", Dragon enters 6' 3".
If a unit of measure is not formatted in the way you expect, you can also use the Word
Properties dialog box to use an alternate form for that particular unit of measure.
Auto-formatting ISO currency codes
If you have selected the Prices option, then you can select "ISO currency codes" to display currency amounts with the International Standards Organization currency symbol corresponding to the region and language set for your Windows operating system or, if
different, for your user profile (see How region and language affect number and currency
punctuation).
For example, if your profile's region is set to United States and you enable both the Prices and ISO currency codes Auto-Formatting options, when you dictate "Ten Dollars"
Dragon enters "USD10".
Auto-formatting phone numbers
Turns on automatic formatting of telephone numbers.
For U.S. English User Profiles using the United States or Canada for the
Region: Turns on automatic formatting North American telephone numbers when you speak a sequence of seven or ten numbers. For example, if you say "7815551234",
Dragon will transcribe "781-555-1234".
207
208
Dragon User Guide
Notes
n
Vanity phone numbers such as 1-800-EXAMPLE are not supported.
n
The automatic formatting of U.S. telephone numbers is not supported for user profiles with a UK Region setting.
For User Profiles using the UK for the Region: Turns on automatic formatting of UK telephone numbers.
Notes
n
Country code +44 can be dictated as "four four", "forty four" or "double four" with a preceding plus sign. For example, if you say "plus-sign four four two nine two oh seven four seven seven four seven", Dragon transcribes "+44 29 2074 7747".
n
Area codes that are dictated without the preceding country code must be dictated with a leading zero. For example, if you say "zero two nine two oh eight seven nine three two seven", Dragon transcribes "029 2087 9327".
n
When you dictate a 6-digit number, Dragon transcribes the number with no spaces.
When you dictate a 7-digit or 8-digit number, Dragon transcribes the number with a space before the last 4 digits.
n
The automatic formatting of UK telephone numbers is not supported for U.S. and
Canadian-based user profiles.
ISO code
USD
USD
CAD
EUR
JPY
GBP
CHF
Auto-formatting prices
Inserts prices and currencies in the proper format with the appropriate currency symbol.
For example, "$10" instead of "10 dollars", or "€50" instead of "50 euros".
Supported currencies are:
Symbol
$
US$
C$
€
¥
£
F
Name
Dollars
Cents
U.S. dollars
Canadian dollars
Euros
Yen
Pounds Sterling Pence/Penny
Swiss francs
Auto-formatting times
Turns on automatic formatting of standard time formats. For example, if you say "Six Thirty
Chapter 23: Improving recognition accuracy
PM", Dragon will transcribe "6:30 PM". Dictating standard time runs on a 12 hour clock, letting you make the distinction between AM and PM.
Military time: With the Time option enabled, you can also dictate times in military format.
For example, if you say "sixteen hundred hours", Dragon transcribes "1600 hrs". If you say "oh three oh five hours" or "zero three zero five hours", Dragon transcribes "0305 hrs".
Dictating Military time uses a 24-hour clock and abbreviates "hours" to "hrs".
Auto-formatting UK and Canadian postcodes
Turns on proper formatting of UK postcodes and Canadian postal codes. For example, with the option on, format a London postcode by saying "W Two Four R J" to enter W2
4RJ, and format a Toronto postal code by saying "M Five H Two L Two" to enter M5H
2L2.
Auto-formatting other numbers
Enables the formatting of all numbers not covered by other options on this dialog box, such as negative numbers, numbers with punctuation, fractions, decimals, and Roman numerals.
Note: Dragon applies Auto-formatting for mixed numbers and also for fractions where the denominator is 5 or greater, but not for simple fractions like "one half," "two thirds," and "three quarters."
For more information, see Dictating numbers
.
Auto-formatting US social security numbers
Turns on automatic formatting of U.S. Social Security Numbers when you speak a sequence of 9 numbers. For example, if you say "123456789," Dragon enters "123-45-
6789."
Auto-formatting using Word Properties
Use Word Properties to customize how Dragon enters words or phrases as you dictate
them. Word Properties can add custom spacing before and after, next word capitalization, settings for numbers before and after, or apply alternate written forms, such as abbreviations.
To add or edit Word Properties, see Creating Word Properties .
Note
n
209
210
Dragon User Guide
Adjusting Speed vs. Accuracy
You can increase product speed or, alternatively, increase recognition accuracy by using the
Speed vs. Accuracy slider.
The Speed vs. Accuracy slider lets you control the number of words and phrases that the program examines in order to find a word match. The more words examined, the greater the possibility of an accurate match at the expense of using more memory and taking a longer time to recognize your speech.
Moving the slider can influence the performance of Dragon. Dragging the slider toward accuracy sometimes increases the accuracy of the matches at the expense of additional time in transcribing your dictation. Moving the slider to the right normally increases recognition accuracy but may also slow system performance. As a general rule, you should move the slider farther to the right on faster machines than on slower ones.
To use the Speed vs. Accuracy slider
1. On the Tools menu of the New DragonBar or Classic DragonBar, click Options.
2. In the Options dialog box, click the Miscellaneous tab.
3. Drag the Speed vs. Accuracy slider to tune performance.
4. Test the new setting by using Dragon. If you are not satisfied with the result, try a different setting.
Notes
n
Running other programs while Dragon is running will also affect accuracy and speed, since other programs compete for system resources.
n
If you get a "The recognizer has encountered an utterance that is too long to process" error, try setting the slider more towards "Fastest Response".
Chapter 24: The Dragon Accuracy Center
Chapter 24: The Dragon
Accuracy Center
This section contains the following topics:
Running the Acoustic and Language Model Optimizer
Using the Accuracy Center
You can use the Accuracy Center to refine the accuracy of your User Profile or to learn more about Dragon. For example, you'll find tools or information in the Accuracy Center for the following kinds of tasks: n
Personalize your Vocabulary n
Adjust your acoustics n
Find or train commands n
Set options and configure formatting n
Find out more about Dragon
To open the Accuracy Center
n say "Open Accuracy Center" or click Help > Improve My Accuracy on the New
DragonBar or Classic DragonBar.
To use the Accuracy Center
Click or say the first few words of a link to start it.
Accuracy Center options
To learn about the specific features of the Accuracy Center, click The Accuracy Center options in the Dragon Help.
Notes
n
When you start the Accuracy Center option that checks your audio settings, the
Check Microphone wizard starts and the Dragon microphone is automatically turned off if it is on. This is necessary in order to facilitate the audio tests.
211
212
Dragon User Guide
Running the Acoustic and Language Model Optimizer
Use this procedure to increase Dragon's accuracy with the Acoustic and Language Model
Optimizer.
As you make and train corrections, train new words or phrases, use commands, or read a text for acoustic training, Dragon stores the acoustic and language data in an archive and uses it to enhance recognition accuracy. The Acoustic and Language Model Optimizer accumulates this data from session to session.
Acoustic Optimization
Perform Acoustic Optimization to update your Profile with accumulated acoustic data from any corrections and training you do.
Language Model Optimization
Perform Language Model Optimization to update your language model. The language model contains statistical information that predicts which words are most likely to occur in the context of your dictations. Language Model Optimization uses text extracted from your .DRA files to add commonly used word sequences to the language model. (Based on the speech data collected, Language Model Optimization may change the language model selected when you created your Profile.)
Before you begin
n
Be sure that the "Store corrections in archive" option is selected on the Data tab of the
Options dialog box. Otherwise you may see a message that there is not enough data for the Acoustic and Language Model Optimizer to process. The "Store corrections in archive" option should be selected whenever you use Dragon for an extended period of time.
To run the Acoustic and Language Model Optimizer
1. Say "Switch to DragonBar," then "Audio," then "Launch Accuracy Tuning," or click Audio >
Launch Accuracy Tuning on the DragonBar.
The Acoustic and Language Model Optimizer dialog box opens with Perform Acoustic
Optimization and Perform Language Model Optimization selected. Nuance recommends that you run both optimizations at the same time to maximize accuracy.
2. Click or say "Go" to start the Acoustic and Language Model Optimizer.
3. The Acoustic and Language Model Optimizer may ask if you want to save your current
Profile. Click or say "Yes" if you made corrections since the last time you ran the Acoustic and Language Model Optimizer, or if you have not run the Acoustic and Language Model
Optimizer since you started using Dragon.
The Acoustic and Language Model Optimizer dialog box shows Dragon's estimate of how long it will take to finish adapting your Profile. How long this takes depends on the amount of
Acoustic Data stored in your Profile.
Notes
n
By default, the amount of acoustic data saved is limited to 180 minutes (the maximum).
You can reduce this amount on the Data tab of the Options dialog box.
Chapter 24: The Dragon Accuracy Center
n
If you attempt to run the Acoustic and Language Model Optimizer before you have trained any corrections (even if you have corrected errors without training the corrections), or before you have performed any additional training, you will see an error message saying that there is not enough data for the Acoustic and Language
Model Optimizer to process. n
Training multiple words or phrases rather than training individual words is generally more effective at increasing accuracy. Most people have a tendency to overenunciate when saying individual words as opposed to a complete phrase.
n
The Acoustic and Language Model Optimizer automatically makes a backup of the old Profile before it begins modifying them. Your Profile is automatically restored if you click Cancel before the Acoustic and Language Model Optimizer is finished.
213
Dragon User Guide
Chapter 25: Recognition Modes
214
This section contains the following topics:
Using Recognition Modes
By default, Dragon interprets what it hears as either dictation (something to write on the screen) or a command (something to execute). This is called Dictation & Commands mode on the New DragonBar, or Normal Mode on the Classic DragonBar. Dragon allows you to use restricted Recognition Modes, which increases accuracy in transcription and is more efficient.
The following describes ways you can use these modes while you dictate. Click the links to display the related procedures.
Normal Mode ( or )
To dictate and say commands interchangeably
The most flexible mode in Dragon is the default Normal Mode. In Normal Mode, Dragon distinguishes dictation from commands by analyzing what you say between pauses. For this reason, you should always pause before and after you say a command.
For example, to bold the word "exciting" in the sentence: "Speech recognition is an exciting technology".
1. Say "Speech recognition is an exciting technology period"
2. Pause briefly.
3. Say "Select exciting".
4. Pause again.
5. Say "Bold That".
You need to pause only briefly. You can adjust the length of the pause required before
Dragon recognizes commands on the Commands tab of the Options dialog box.
Chapter 25: Recognition Modes
Dictation Mode ( or )
To dictate rapidly without looking at your computer monitor
In Dictation Mode, Dragon interprets everything you say as dictation and Dictation
Commands , such as New Line, New Paragraph, and Cap, are recognized. Dictation Mode
can be helpful if you want to dictate as quickly as possible, or dictate without looking at the screen. Say "Start Dictation Mode" or "Dictation Mode On."
1. Say "Start Dictation Mode" or "Dictation Mode On".
"Dictation Mode" appears in the status box of the DragonBar.
2. Dictate a few paragraphs. You can dictate without looking, knowing that everything will be transposed as text and no commands (except for Dictation commands) will be executed. You can also dictate sentences that contain words that Dragon normally interprets as commands, such as "I really liked your novel. No, scratch that - I loved your novel!"
Dragon should transcribe the words as text and not execute commands as it normally would.
Command Mode ( or )
In Command Mode Dragon interprets everything you say as a command and nothing is interpreted as dictated text. This can be helpful when formatting an existing document.
1. Say "Start Command Mode" or "Command Mode On".
"Command Mode" appears in the status box of the DragonBar.
2. Use commands to format a document. For example, to capitalize the last five words you dictated, say "Capitalize the Last Five Words".
For more examples, see Formatting text in Microsoft Word or Formatting text in Corel
WordPerfect in the Dragon Help.
Numbers Mode ( or )
To insert numeric characters
By default, when you say a number that is lower than 10, Dragon transcribes it as a word, unless you say the dictation command "numeral" before it. In Numbers Mode Dragon interprets almost all of your dictation as numbers. This is useful if you need to enter numeric data in a table or in spreadsheets.
1. Say "Start Numbers Mode" or "Numbers Mode On".
The DragonBar shows the Numbers mode indicator status box.
and "Numbers mode" in the
2. Dictate only numbers. The numbers can include currency or percentages. For example, say "5 percent sign" to enter "5%" or say "Seven hundred twenty three dollars and sixty eight cents" to enter the dollar amount "$723.68".
215
216
Dragon User Guide
Spell Mode ( or )
To spell words or insert alphanumeric characters
In Spell Mode Dragon allows you to say any combination of letters, digits, or symbols. For example, use Spell Mode to dictate part numbers, license plate numbers, or proper nouns that are not in Dragon's Vocabulary. You can also say keystrokes such as "space bar" or "backspace key", or Internet or Web addresses.
1. Say "Start Spell Mode" or "Spell Mode On".
"Spell Mode" appears in the status box of the DragonBar.
2. Dictate an alphabetic string, such as a homophone alternative you need to use.
For example, say the letters "F O R E" to have Dragon enter the word "fore".
When Spell Mode is on, you will not be able to dictate words.
You can still use commands while in Spell Mode.
Switching recognition modes
You can use the following techniques to switch recognition modes:
To switch to Normal Mode ( or )
On the New DragonBar, Dictation & Commands mode is the equivalent of Normal Mode. n
Say "Switch to Normal Mode" or "Start Normal Mode" or "Normal Mode On".
On the New DragonBar, these commands select Dictation & Commands mode.
n
From the Recognition Mode drop-down list on the New DragonBar, select Dictation &
Commands.
n
On the Modes menu of the Classic DragonBar, click Normal Mode.
To switch to Dictation Mode ( or )
n
Say "Switch to Dictation Mode" or "Start Dictation Mode" or "Dictation Mode On". n
Hold down the Shift key as you dictate. n
From the Recognition Mode drop-down list on the New DragonBar, select Dictation.
n
On the Modes menu of the Classic DragonBar, click Dictation Mode.
To switch to Command Mode ( or )
n
Say "Switch to Command Mode" or "Start Command Mode" or "Command Mode On". n
Hold down the Control key as you dictate. n
From the Recognition Mode drop-down list on the New DragonBar, select
Commands.
n
On the Modes menu of the Classic DragonBar, click Command Mode.
Chapter 25: Recognition Modes
To switch to Numbers Mode ( or )
n
Say "Switch to Numbers Mode" or "Start Numbers Mode" or "Numbers Mode On". n
From the Recognition Mode drop-down list on the New DragonBar, select Numbers.
n
On the Modes menu of the Classic DragonBar, click Numbers Mode.
To switch to Spell Mode ( or )
n
Say "Switch to Spell Mode" or "Start Spell Mode" or "Spell Mode On". n
From the Recognition Mode drop-down list on the New DragonBar, select Spell.
n
On the Modes menu of the Classic DragonBar, click Spell Mode.
Notes
217
Dragon User Guide
Chapter 26: Teaching Dragon to
Understand You Better
218
This section contains the following topics:
Training misrecognized commands
Training individual words and phrases
Training misrecognized commands
If Dragon consistently misrecognizes a specific voice command (for example, it hears
"Correct That" as "Correct dot"), you can train it to recognize your pronunciation of the command.
To train commands
1. Say "Open Command Browser" or click Command Browser on the Tools menu of the New
DragonBar or Classic DragonBar.
2. Say "Click Browse", then "Context", then "<Application name>" (the program in which the command is available) or click Browse > Context > <Application name>.
3. Say or click "Keyword Filter."
4. Say or type a keyword for the command you want to train in the Choose Word box.
5. Say or click "Add" to move the word to the "Current list of filter words." Repeat until you have as many keywords as you need to find the command in question.
6. Say or click "Done."
7. If more than one command appears in the list, select the command you are looking for, expanding it with the Optional, Ellipsis, or Refine buttons if necessary.
8. Do one of the following: n
Say or click "Train" and follow the directions on the Train Words dialog box that appears.
Or n
Say or click "Train Later." Dragon adds the command to the Train List. Open it to train the commands you stored there.
Chapter 26: Teaching Dragon to Understand You Better
If you have untrained commands in the Train List when you close the Command
Browser, Dragon offers you the choice to train them before you exit.
Notes
n
When you train words or phrases, be careful to speak in your normal voice. Avoid the natural tendency to over enunciate when speaking single words or short phrases as it could actually reduce recognition accuracy.
n
When you train a command using the Train Words dialog box, you add to the acoustic
data stored for later use by the Acoustic Optimizer
. This data, including your pronunciation and the acoustic differences between the trained correction and the misrecognized word or phrase, are used by the Acoustic Optimizer to enhance recognition accuracy.
Training individual words and phrases
If Dragon is not recognizing certain words or phrases, and you have tried correcting the misrecognition at least twice, then you should consider training that word or phrase to teach
Dragon exactly how you pronounce it.
The following procedures describe two different ways to train words or phrases:
To train individual words and phrases immediately after dictating them
1. Correct the misrecognized word or phrase you want to train and say "Train That."
2. Click Go in the Train Words dialog box and record your speech saying the word or phrase you want to train.
3. When you have finished recording the text, click Done.
To train individual words and phrases at any time
1. Say "Open Vocabulary Editor", or click Vocabulary > Open Vocabulary Editor on the New
DragonBar or Classic DragonBar.
2. In the Vocabulary Editor, say or click Train.
3. Type the word or phrase you want to train in the Training dialog box.
4. Click Go in the Train Words dialog box and record your speech saying the word or phrase you want to train.
5. When you have finished recording the text, click Done.
Using punctuation with written and spoken forms
If the written form of a word contains any punctuation, you should provide a spoken form so that there is no doubt as to how the item will be pronounced. Do not use abbreviations, symbols or punctuation in the spoken form.
Examples:
219
220
Dragon User Guide
Written form Spoken form
The Man from U.N.C.L.E.
the man from uncle
Soddy-Daisy, TN Soddy Daisy Tennessee
Trenton-Mercer Airport Trenton Mercer Airport
If you want to add punctuation to a word that already exists in the Vocabulary for use in a specific setting, you can create a new written form with the punctuation included and a unique word or phrase for the spoken form.
For example, if you wanted Dragon to type the word "U.N.C.L.E." in the header of your letters, the written form could be "U.N.C.L.E." and the spoken form could be "UNCLE." That way, Dragon would still type only the word "uncle" when you dictate it as usual, because it also exists in the Vocabulary.
Alternately, if you wanted to add punctuation to a word that already exists in the Vocabulary every time you used that word, you would change the properties of the existing word. For more information, see Word Properties in the Dragon Help.
Notes
n
When you train words or phrases, be careful to speak in your normal voice. Avoid the natural tendency to over-enunciate when speaking single words or short phrases as it could actually reduce recognition accuracy.
n
A word or phrase must exist in the Vocabulary (that is, have been created previously) before you can train it.
n
You can also use the Train button in the Vocabulary Editor dialog box .
n
When you train a word or phrase using the Train Words dialog box, you add to the
acoustic data stored for later use by the Acoustic Optimizer
. This data, including your pronunciation and the acoustic differences between the trained correction and the misrecognized word or phrase are used by the Acoustic Optimizer to enhance recognition accuracy.
Supplemental training
Supplemental training refers to a text reading you perform to help improve your recognition accuracy. It is most useful when: n
You have used Dragon for a few days. By then, you will be somewhat accustomed to dictating to it, and supplemental training should reflect how you actually dictate, as opposed to how you would read aloud a regular text, such as an article in today's newspaper.
n
You move to an environment that is significantly noisier or quieter or that has different background sounds.
n
You have changed your microphone or sound card.
To train Dragon some more
1. Do one of the following: n
Say "Switch to DragonBar," then "Audio" then "Read Text to Improve Accuracy."
Chapter 26: Teaching Dragon to Understand You Better
Or n
Say "Open Accuracy Center" then "click Read text to train Dragon."
2. As you read, try to speak with the same tone of voice, speed, and volume as you typically will when dictating to Dragon.
3. When you are finished, click Finish.
You can read as much or as little as you want, but the longer you train, the more likely you will notice improvements in recognition accuracy.
221
Dragon User Guide
Chapter 27: Personalizing your
Dragon Vocabulary
222
This section contains the following topics:
About personalizing your Vocabulary
Adding words or phrases to your Vocabulary
Learning from specific documents
Adding words with the Spelling window
Adding contact names to the Vocabulary
Using the Don't Recognize That Word Command
About personalizing your Vocabulary
You can personalize a Vocabulary to more closely match your writing style and to recognize any special words which you dictate. You can do this in several ways, by adding words or phrases, or by adding entire documents that you write or lists of words that you prepare, and
by using Smart Format Rules . Dragon can add these new words to the Vocabulary and
update the Vocabulary with information about your word usage. This improves the likelihood that Dragon will correctly recognize what you say.
You can use the following methods to add or delete words in the Vocabulary.
Adding words or phrases to your Vocabulary
Learning from specific documents
Importing lists of words or phrases
Using the Don't Recognize That Word Command
Notes
n
You are not required to train new words because Dragon automatically "guesses" the pronunciations based on their spelling. If, however, your new words are not recognized correctly, you should train them.
Chapter 27: Personalizing your Dragon Vocabulary
n
Be sure to save your User Profile after adding new words or the new words will not be saved.
n
If you use multiple-word phrases with unusual capitalization (for example,
"ComputerWeek"), you can improve recognition accuracy by adding these phrases to the Vocabulary before Dragon analyzes your documents. Add these phrases by using the (say "Open Vocabulary Editor" or click Vocabulary > Open Vocabulary
Editor on the New DragonBar or Classic DragonBar.) or by including them in lists of items you import into the Vocabulary.
n
Dragon can auto-format text and numbers using standard writing conventions or
to words as you dictate. For information about these settings, see Auto-formatting dialog box and The Word Properties dialog box.
n
Dragon's Smart Format Rules appear when you correct auto-formatted
alphanumeric text or Word Properties using the Correction menu, the Spelling
window, or the keyboard. For details, see Using Smart Format Rules
Adding words or phrases to your Vocabulary
If Dragon gets a word wrong, it may be that the word is not in Dragon's Vocabulary. When this is the case, you can use the following procedure to add that word so that it is recognized in the future.
To add individual words
1. Do one of the following: l
Click Vocabulary > Add New Word or Phrase on the New DragonBar or Classic
DragonBar.
l
Say "Switch to DragonBar" then "Vocabulary" then "Add New Word or Phrase".
2. In the Add Word or Phrase dialog box , spell (by voice) or type the word you want to add.
3. Include a Spoken form of the new word if necessary. For example, if the word contains an accent, such as "Gaspé," you would add a Spoken form like "gas pay" so that Dragon recognizes the pronunciation and enters the Written form when you dictate the word.
4. Optionally, select "I want to train the pronunciation of this word or phrase".
5. Click Add.
If you chose to train the word, the word you entered appears in the Train
Words dialog box, and you will be able to teach Dragon your pronunciation of that word.
See also Automatically add words to Vocabulary in the Dragon Help.
Using punctuation with written and spoken forms
If the written form of a word contains any punctuation, you should provide a spoken form so that there is no doubt as to how the item will be pronounced. Do not use abbreviations, symbols or punctuation in the spoken form.
Examples:
223
224
Dragon User Guide
Written form Spoken form
The Man from U.N.C.L.E.
the man from uncle
Soddy-Daisy, TN Soddy Daisy Tennessee
Trenton-Mercer Airport Trenton Mercer Airport
If you want to add punctuation to a word that already exists in the Vocabulary for use in a specific setting, you can create a new written form with the punctuation included and a unique word or phrase for the spoken form.
For example, if you wanted Dragon to type the word "U.N.C.L.E." in the header of your letters, the written form could be "U.N.C.L.E." and the spoken form could be "UNCLE." That way, Dragon would still type only the word "uncle" when you dictate it as usual, because it also exists in the Vocabulary.
Alternately, if you wanted to add punctuation to a word that already exists in the Vocabulary every time you used that word, you would change the properties of the existing word. For more information, see Word Properties in the Dragon Help.
Learning from specific documents
You can use the Learn from Specific Documents wizard to personalize your profile by adding words from specific folders or documents to your vocabulary. Dragon analyzes the documents to update the vocabulary with information about your word usage.
Caution
To maintain accuracy, Dragon must only analyze content in the language in which your user profile was created. Be sure to select only documents in the language of your current profile.
To add words from specific documents
1. Say "Open Accuracy Center" and then "Learn From Specific Documents" or click
Vocabulary > Learn From Specific Documents on the New DragonBar or Classic
DragonBar.
2. In the Learn from Specific Documents wizard, select from the following options: n
Find Known Words with Unknown Capitalization: Select this option to have Dragon look for words on your system that are in its Vocabulary but which use different capitalization, such as Desktop. This option is turned off by default.
n
Adapt to Writing Style: Select this option to have Dragon analyze word combinations to improve its capacity to anticipate your writing and dictation style. This option is turned on by default.
3. Click Next to continue. The Learn from Specific Documents screen opens.
4. Do any of the following: n
Click Add Folder if you want Dragon to scan a specific folder, such as your My
Documents folder. Click Include Subfolders in the Browse for Folders dialog box if there are subfolders you want to analyze.
n
Click Add Document if you want Dragon to scan specific documents.
Chapter 27: Personalizing your Dragon Vocabulary
n
Click Remove Document if you add a document and then decide that you don't want
Dragon to include it in the scan.
n
Click View Document if you want to review a document you added before proceeding.
5. Click Next to continue. A Document Analysis window opens, displaying a status bar during the scan. Dragon confirms whether new words were found and displays a summary of the results.
6. Click Next to continue. If you selected words to add to the Vocabulary, a Train Words screen opens.
7. You can click Train to train Dragon about how you pronounce each added word.
8. When you finish training new words, click Next. The Adapt to Writing Style screen opens, indicating whether the adaptation was successfully completed.
9. Click Next to continue. The Summary screen opens, showing the results of the scan. For example, "1 new word was found" and "1 word was added to your Vocabulary".
10. Click Finish to close the wizard.
11. Say "Switch to DragonBar" and then "Profile" and then "Save User Profile", or click
Profile > Save User Profile on the New DragonBar or Classic DragonBar to finish adding the words.
Notes
n
If you make a mistake and do not want to add the words, avoid making additional changes to the Vocabulary that you want to save, and then exit Dragon without saving.
n
When adding words from documents, you will get the better results if you remove all formatting from the documents you use. For information about how to prepare documents, see the topic Preparing documents to add to the Vocabulary.
Adding words with the Spelling window
If Dragon misrecognizes a word, it may be that the word is not in the program's Vocabulary.
When this is the case, you can use the following procedure to add the word so that it is recognized in the future.
To add words with the Spelling window
1. Say "Spell That," followed by the first four to six letters of the desired word.
The Spelling window opens.
2. In the the Spelling window, finish typing the word or spell it by voice.
3. If you wish to train the pronunciation of the word, click Audio > Improve Recognition of
Word or Phrase and follow the instructions in the Train Words dialog box.
Note
You cannot use the Spelling window to add a word that has hyphens or spaces. The program recognizes each part of such a word as separate pieces. For example, if you tried to use the Spelling window to add the name "Havisham-Smythe," you would actually be adding the names "Havisham" and "Smythe". The next time you spoke the name you would
225
226
Dragon User Guide
get "Havisham Smythe" without the hyphen. To add such a word or name, use the
Vocabulary Editor dialog box (say Open Vocabulary Editor).
Learn From Sent E-mails
Use the Learn From Sent E-mails tool to make your profile more accurate by personalizing the vocabulary based on emails you have sent.
The tool will offer a list of names from the recipients of your emails and give you the opportunity to train any of them before they are added to the vocabulary.
Optionally, you can also have this tool use the contents of your sent e-mail to adapt the
Language Model (Dragon's statistics on how frequently a given word appears individually and in the context of other words).
Caution
To maintain accuracy, Dragon must only analyze content in the language in which your user profile was created. If you have Sent e-mail in other languages, only use this tool to add e-mail contacts to your profile.
Note
You may want to run the Learn From Sent E-mails tool only when you are not using your computer for other purposes because the tool uses large amounts of computer memory and processing power.
To open the Learn From Sent E-mails tool
n
Say "Open Accuracy Center," then "Learn From Sent E-mails."
Or n
Click Vocabulary > Learn From Sent E-Mails on the New DragonBar or Classic
DragonBar.
Tip
You can also start the Learn From Sent E-mails tool by saying "Add Contacts".
Once you start the Learn From Sent E-mails wizard, proceed by clicking Next. The tool leads you through the following screens: n
Choose options n
Scan e-mail n
Add contacts to Vocabulary n
Train words n
Adapt to Writing Style n
Report
Adding contact names to the Vocabulary
The Learn From Sent E-mails tool lets you add the names of people to whom you have sent e-mail to your Dragon Vocabulary. Using this tool, you can edit and train the names you add.
Chapter 27: Personalizing your Dragon Vocabulary
You can also have Dragon analyze the contents of your sent e-mail to adapt the language model to more accurately recognize your writing style.
Dragon supports adding contacts in the following e-mail programs: n
Windows Live Mail
To add contact names from your sent e-mail to your Vocabulary
1. Start the Learn From Sent E-mails tool from the Vocabulary menu of the New DragonBar or Classic DragonBar or by saying "Add Contacts".
2. On the first screen of the Learn From Sent E-mails wizard, click Next.
3. On the Choose Options screen, select the e-mail programs from which you would like to add contact names and select the "Add contact names from e-mail to the Vocabulary" box.
4. Optionally, you can select the "Improve my profile from my e-mail writing style" if you want
Dragon to better understand your Vocabulary and word usage by analyzing your e-mail messages. You can also choose whether the tool should scan all sent emails or just the emails sent since its last scan.
5. Click Next and wait for the wizard to scan the selected e-mail programs. (It may take a few seconds before the process starts.) When the wizard is finished, click Next.
6. On the Add contacts to Vocabulary screen, select the words you want to add, and click
Next. Note: you can save time by using the Uncheck All or Check All buttons.
7. On the Train Words screen, select the items you want to train, if any, then click Next to read these items out loud.
8. Wait for the program to adapt your language model. A report screen will then summarize the wizard's results, including number of words added, if any.
Notes
n
If you want Dragon to analyze Web-based email, make sure your computer is connected to the Internet for the duration of the email analysis.
n
(Lotus Notes only) New contact names will be detected for everyone to whom you have sent e-mail, except those contacts to whom you have sent Reply messages.
n
Nicknames can only be added to your Vocabulary if your e-mail program supports nicknames.
n
Do not use "Improve my profile from my e-mail writing style" if you wrote e-mail messages in languages other than the language of your current profile, as this could decrease recognition accuracy.
Deleting words
Use this procedure to delete words from the active Vocabulary . Deleting words is not
normally necessary, but you may want to do it for particular words if Dragon tends to substitute a word you never use for a word you want to use, such as “Schaeffer” instead of
“Schafer.”
To delete words
1. Say "Open Vocabulary Editor," or click Vocabulary > Open Vocabulary Editor on the New
DragonBar or Classic DragonBar.
227
228
Dragon User Guide
2. Select the desired word. To find the word you want to delete, enter it into the Search field
(type it or use the “spell” command to enter it character by character.
3. When the word appears and is highlighted, say "click Delete".
4. Close the Vocabulary Editor.
To restore words
Use this procedure if you have deleted a word from the Dragon Vocabulary and later want to restore it.
1. Open the Vocabulary Editor.
2. From its Display drop-down list, choose Deleted Words Only. The display now shows any words you have deleted.
3. Choose a Deleted word, and say "click Add" or click the Add button.
Note
If you delete a word using the Vocabulary Editor dialog box, but that word exists in the current document, the word may be automatically added back into your active Vocabulary.
Using the Don't Recognize That Word Command
Dragon lets you to turn off recognition of words using the Correction menu and the "Don't recognize that word" command.
Don't Recognize That Word removes the selected word from your active Vocabulary , so that
Dragon won't recognize it again. This can save you time if Dragon repeatedly replaces words you dictate with words you don't use.
For example, if you dictate the name "Cassity" often and Dragon always hears "Cassidy", you could use Don't Recognize That Word from the Correction menu to turn off recognition of
Cassidy. If you decide later that you do need to use the word, you can add it back using the
Vocabulary Editor.
When you use the "Don't recognize that word" command or Don't Recognize That Word from the Correction menu to turn off recognition of a word, you will be presented with one of the following messages to confirm a deletion of the word:
Are you sure you want to delete the following word from the Vocabulary?
This message is displayed when you use the "Don't Recognize That Word" command to
delete a word or phrase from the Vocabulary .
The following word can only be removed from the Vocabulary using the Vocabulary Editor.
This message is displayed when you use the "Don't Recognize That Word" command to try to
delete a custom word or frequently used word such as "the" from the Vocabulary. You can
use the Vocabulary Editor to delete the word.
The following word can't be deleted because it does not exist in the Vocabulary.
This message is displayed when you use the Don't Recognize That Word command to try to delete a word or phrase that is not in the Vocabulary.
For more information, see the Correction menu.
Chapter 28: Managing Vocabularies
Chapter 28: Managing
Vocabularies
This section contains the following topics:
About Vocabularies
Dragon uses one or more Vocabularies with your User Profile to help it to recognize words and phrases correctly, based not only on the sound of the words and phrases, but also on their context.
When you create a new User Profile, you select a Base Vocabulary
that Dragon then updates as it adapts to your speech.
Language
The languages available for your Vocabulary. Some editions of Dragon support multiple languages.
Vocabulary type
In most cases your User Profile will be based on the General Vocabulary, a large
Vocabulary providing excellent recognition accuracy for general, business, and professional dictation.
The following specialized Vocabularies are also available: n
Legal (Dragon Legal Edition)
A large Vocabulary providing excellent recognition accuracy for legal terms. n
Medical (Dragon Medical Edition)
A set of specialized large medical Vocabularies providing excellent recognition accuracy for medical terms. The Vocabulary names are: General, Cardiology,
Emergency, Gastroenterology, General Practice, Medical, Mental Health, Neurology,
Obstetrics/Gynecology, Oncology, Orthopedics, Pathology, Pediatrics, Radiology, and Surgery.
229
230
Dragon User Guide
Advanced
On the Review Your Choices screen of the New User Profile wizard, you can click the
Advanced button to display the Advanced Choose Models dialog box. On this dialog box you can choose a different speech model and Vocabulary Type. Dragon automatically determines the best speech model and Vocabulary Type for your computer when you create a User
Profile, so you do not generally need to change these options.
Speech model
You can associate speech models with your Dragon Vocabulary, depending on your accent, and the type of microphone and computer you are using.
For a list of supported devices see the Hardware Compatibility list on the Nuance Web site.
Vocabulary Type
If you click the Advanced button, you can specify a different Vocabulary type from among the following choices.
Note
Some Dragon editions or add-on products may install additional Vocabularies.
Chapter 29: Using the Command Browser
Chapter 29: Using the Command
Browser
This section contains the following topics:
Finding commands in the Command Browser
Training commands in the Command Browser
About the Command Browser
The Command Browser is a window where you can locate voice commands that Dragon recognizes, including commands that are provided with the software as well as any commands that you or your system administrator might have added (custom commands).
The Command Browser is the most comprehensive place to see the commands that are available in each application.
You use the Command Browser to: n
View and train commands
Some commands are not available in Dragon Premium and lower editions.
Command Browser modes
Browse
Browse mode allows you to search for a specific command. For more information see the
topic Finding commands in the Command Browser .
To make the Command Browser appear always on top
n
Say "Mode > Always On Top," or on the Mode menu, click Always On Top.
n
On the Command Browser shortcut menu, click Always On Top.
n
Click on the Command Browser icon on the left side of the Command Browser or right-click anywhere on the Command Browser to open the Command Browser shortcut menu.
231
232
Dragon User Guide
Note
When you set the Command Browser to "Always On Top" it will cover secondary Dragon windows, such as the DragonPad and Help screens. In these cases, you will have to turn off the "Always On Top" state or move the windows around so that they are not obscured.
Opening the Command Browser
The Command Browser displays commands that Dragon recognizes in the current context, whether you are working in a specific program or on the Windows Desktop.
To open the Command Browser
Say "Open Command Browser" or "Start Command Browser" or, on the Tools menu of the
New DragonBar or Classic DragonBar, click Command Browser.
You can also open the Command Browser from the Accuracy Center.
Some commands are not available in Dragon Premium and lower editions.
Global Commands
When the Command Browser first opens, it displays a list of Global Commands available in every application.
But if you want to view commands for individual applications, Dragon shows only commands applicable in that context. Use the Context box to select a specific application and Dragon displays only the commands that work in that application. If you were viewing commands for the Dragon Learning Center (as shown), initially a subset of commands that apply only to the
Learning Center appear. See Finding commands in the Command Browser for details.
Chapter 29: Using the Command Browser
To display Global Commands for a specific application
Select the Global Commands checkbox to include Global Commands, in the current display, i.e. present them together with the commands that work just in the selected context.
In the Command Browser, say "Include Global" or, on the Command Browser Ribbon Bar, click Include Global.
Finding commands in the Command Browser
If a command exists for a specific application or context, you can use the Command Browser to find it.
To find a specific command
1. Use the list in the Context box to select the application context you want to see commands for.
2. Select the Include Global checkbox.
233
234
Dragon User Guide
When the Include Global checkbox is selected, the Command Browser displays all the commands available in the current command context, including any commands available in all (global) contexts. Note that the
Command Browser initially opens with Global Commands selected in the
Context list box so that the Include Global checkbox is not active. You must select a different command context to make the Include Global checkbox active.
3. Click Keyword Filter to display the Keyword Filter dialog box.
4. Say or type a letter or word of the command you are looking for in the Choose word box.
The list below the box scrolls to the first instance of that letter or word in the list. (If the letter or word exists, it is selected. If the letter or word does not appear, then there is no command in the current context that uses them.)
5. Double click on the word in the list or click Add to add the word to the Current list of filter words box.
6. If necessary, continue to enter words into the Choose Word box and add them to the
Current list of filter words box until you have added as much of the specific command as you can.
7. Click or say "Done." The Command Browser displays the commands containing the words you entered, if any command containing all of those words exists.
Example
To see if there is a command that changes a font to bold in Microsoft Word 2010:
1. Select Microsoft Word 2010 from the Context list box.
2. Click or say "Keyword Filter."
3. Say or type the word "Bold" and then say "Add" or click the Add button to add it to the
Current List of Filter Words box.
4. Say or type the word "Set" and then say "Add" or click the Add button to add it to the
Current List of Filter Words box.
5. Click or say "Done."
The Command Browser displays all the commands that will turn text bold in Microsoft Word
2010.
Chapter 29: Using the Command Browser
Some complex commands may not be fully visible at first. See the topic Expanding commands for information on how to view all parts of a command.
Note: Previous command searches appear in the Keyword Filter list .
You can select a previous search from this list to automatically display the results of that search, without having to open the Keyword Filter dialog box and set up the search criteria again.
Training commands in the Command Browser
If Dragon consistently misrecognizes a specific voice command (for example, it hears "Paste
That" as "Paste dot"), you can train it to better recognize your pronunciation of the command.
To train a command
1. Open the Command Browser (say "Command Browser" or click Command Browser on the Tools menu of the New DragonBar or Classic DragonBar).
2. Select the command context from the "Context" list.
4. Click or say one of the following buttons on the Command Browser task pane:
235
236
Button
Dragon User Guide
Result
Lets you immediately train the selected command. Follow the directions on the Train
Words dialog box that appears.
Adds the command to a list of commands of the Train List for later training. By selecting
Train Later, you activate the Train List button.
Displays the Train Words dialog box with a list of commands to be trained. If you have untrained commands in the Train List when you close the Command Browser, Dragon offers you the choice to train them before you exit.
The Dragon Glossary
The Dragon Glossary
Use this glossary for a list of terms specific to Dragon.
.DRA files (definition)
Dragon Recorded Audio (DRA) files. If your edition supports it, Dragon automatically saves audio and text transcripts of your dictation in the DRA files.
Dragon Accuracy Center (definition)
Offers a central location for tools you can use to personalize your vocabulary, improve acoustics, find or manage commands, or get more information about improving your accuracy. Click the links to open the related Dragon tools.
To open the Accuracy Center, say “display Accuracy Center” or click Help > Improve My
Accuracy on the New DragonBar or Classic DragonBar.
Accuracy Slider (definition)
A sliding control that Dragon uses to adjust speed relative to accuracy as it performs speech recognition. A higher accuracy setting means that Dragon may take longer to display your text, while a higher speed setting means that Dragon displays the text more quickly.
Accuracy Tuning (definition)
A process Dragon can use to adapt to your usage. Once you have been dictating for a period of time, Dragon uses Accuracy Tuning to automatically refine your User Profile, analyzing your dictation, corrections, commands, and any other acoustic training you have done.
Accuracy Tuning uses two of Dragon's accuracy tools, the Acoustic Optimizer and the
Language Model Optimizer, and you can schedule them to run automatically.
Acoustic and Language Model Optimization (definition)
Increases User Profile accuracy based on n accumulated acoustic data from your corrections and any additional training you have performed n commonly used word sequences extracted from your User Profile's .DRA files.
237
238
Dragon User Guide
Acoustic Optimizer (definition)
Looks for any corrections you have made or additional training you may have performed since you created your User Profile or ran the optimizer. Optimization enhances recognition accuracy and helps predict words most likely spoken in a given context by a speaker (the language model).
Active vocabulary (definition)
A list of about 150,000 words that Dragon loads into your computer’s random access memory for immediate use during dictation. These are the words that Dragon is most likely to recognize on the first try, without requiring you to do anything extra such as correcting the words with the Correction menu.
The number of words in the active vocabulary always remains the same. When new words are added, words that have not been used recently are removed from the active vocabulary,
but remain on the computer's disk in the backup dictionary
.
Advanced Scripting (definition)
Supports using programming languages such as Microsoft® VBA to create commands that can perform virtually any function on the computer with voice commands.
Base Vocabulary (definition)
The initial Vocabulary a User Profile is based on. Vocabularies can be the following sizes.
Specialized medical and legal vocabularies are also provided in the Dragon Medical and
Legal editions.
Backup dictionary (definition)
A store of about 150,000 additional words in Dragon's vocabulary . A typical large Dragon
vocabulary consists of about 300,000 words and Dragon loads about half of those it understands that you are more likely to dictate into your computer's random access memory for immediate use. The list of words Dragon loads into memory is called the "active vocabulary."
You can move frequently used words from the backup dictionary into the active vocabulary
or add new specialty words, proper names, acronyms, and unusual abbreviations using any of the following methods: n
Add new or frequently used words and teach Dragon about how frequently you'll use
them with the Learn from Specific Documents
, Learn From Sent E-mails , and Import
lists of words or phrases tools n
Use the Correction menu to correct the error n
Correct dictation errors using the mouse or keyboard (the microphone can be on, off, or asleep) n
Use the Spelling window to spell the word
Remember to save your User Profile to keep your changes. will
The Dragon Glossary
Command Browser (definition)
A window showing voice commands that Dragon recognizes, including commands that are provided with the software as well as any commands that you or your system administrator might have added (custom commands). The Command Browser is the most comprehensive place to see the commands that are available in each application.
Command Mode (definition)
A restricted recognition mode that causes Dragon to interpret everything you say as a command and nothing is interpreted as dictated text. Say "Start Command Mode" or
"Command Mode On."
Correction menu (definition)
Shows Dragon’s best guess for alternatives to words you dictated and selected. Choose the correct word from the Correction menu by saying “Choose” and the number next to your choice.
Correction-only mode (definition)
Enables transcriptionists to play back a Dragon user's dictation without having their User
Profile loaded. Note that dictation is disabled if you select this option.
Custom word (definition)
A new word you add to the base Vocabulary using the Train command or the Add command in the Vocabulary Editor. You can also add words to the Vocabulary using the Spelling
Window or the Add New Word or Phrase command on the Vocabulary menu.
In the Vocabulary Editor, a red cross next to a word indicates that it is a custom word that has been added to the Vocabulary.
Data Collection (definition)
Helps to improve the accuracy of future versions of Dragon NaturallySpeaking and Dragon
Medical. By enabling Data Collection, you can allow Dragon to collect up to 500 MB of acoustic data and text from your dictation sessions. If you agree, the data can be sent to
Nuance at a time scheduled by your network administrator. Data Collection does not include any personal data, and participation is completely voluntary.
Data Distribution Tool (definition)
Enables developers to interactively create new words, customized Vocabularies or commands, and to make them available to all User Profiles on a particular Dragon
NaturallySpeaking installation.
Dictation Box (definition)
Provides full support for dictating and editing text in an unknown text field. The Dictation I Box supports voice commands like Delete, Correct, and Insert, and custom commands as well.
239
240
Dragon User Guide
When you are finished, the content is transferred to your cursor position when you opened the
Dictation Box.
Dictation commands (definition)
Commands such as "new line," "new paragraph," and "cap <word>" that you can say without pausing. Also referred to as "in-line commands."
Dictation Mode (definition)
A restricted recognition mode that causes Dragon to interpret everything you say as dictation
and only Dictation Commands are recognized. Dictation Mode can be helpful if you want to
dictate as quickly as possible, or dictate without looking at the words Dragon transcribes. Say
"Start Dictation Mode" or "Dictation Mode On."
Direct Editing commands (definition)
Voice formatting and correction commands such as “italicize <XYZ>” or “bold <XYZ>”. Direct
Editing commands (formerly called Quick Voice Formatting commands) are faster than conventional commands, because they tell Dragon to go to other places in your document, apply formatting there, and return the cursor back to where you are working.
DragonPad (definition)
Dragon’s built-in word processor, optimized for dictation and includes basic text formatting features as well as the ability to save and print documents.
Dragon Templates with Voice Fields (definition)
A special kind of custom form available to paste into applications by voice, providing fields for common variable information that you can fill in by voice.
Dragon Voice Shortcuts (definition)
Dragon voice shortcuts collapse common multi-step tasks into direct voice commands that you can say at anytime, no matter what is active on your screen.
For example, you can immediately switch to and start a new task, such as search the Web or your computer, or compose an e-mail or set up an appointment.
Field (definition)
A field, also referred to as a variable field, is an alphanumeric string enclosed by text delimiters. For example, the following sentence appears in the Dragon CCU fellow admit template included in Dragon Medical: The patient was seen in conjunction with Dr.
[ProviderName]" In the example, "[ProviderName]" is the variable field, the square brackets are the default delimiters, and the text string "ProviderName" is the variable that the Dragon
User Profile will replace with a provider name when using the template to complete a report.
The Dragon Glossary
Full Text Control (definition)
Refers to the level of dictation support available in Web and desktop programs and windows when Dragon fully supports creating, editing, and formatting content. When a program or part of a program has Full Text Control, you can move the cursor reliably – for example, to the beginning or end of a line or paragraph. You can also select, format, and revise text as needed using Direct Editing commands, the Correction menu, or the Spelling Window.
For supported Web applications, Full Text Control is activated using the Dragon web extension in supported browsers.
When the cursor is in a text field for which Dragon has Full Text Control, the Text Control
Indicator on the Classic DragonBar ( ) or the New DragonBar ( ) is green when all of
Dragon's selection and dictation capabilities are supported.
Hidden Mode (definition)
Absent from non-medical editions, this mode allows Dragon to send all recognized text to the Dictation Box, which is active but does not display. All recognized text is added to the
Dictation Box, regardless of the cursor location. Hidden Mode is often used by healthcare providers who are dictating medical reports to be sent to a medical transcriptionist/editor.
Say "Start Hidden Mode" or "Start Hidden Mode."
Language Model (definition)
Contains statistical information that predicts which words are most likely to occur in the context of the user’s speech.
Language Model optimization (definition)
Updates the language model of the current Vocabulary. Language Model Optimization uses text Dragon extracts from the .DRA files that are created when you correct words. Based on the speech data collected, Language Model Optimization applies modifications to the language model to reflect your word usage.
Language Model Optimizer (definition)
Performs Language Model Optimization from the Accuracy Center. Any Dragon user with administrator privileges can schedule Dragon to perform optimization periodically.
Natural Language Commands (definition)
Provide greater flexibility in the wording you use to perform common actions in a variety of applications such as Microsoft Word, Internet Explorer, and Mozilla Firefox. Instead of requiring users to memorize specific commands, such as "bold that," the Natural Language
Commands give you a wide range of words you can say to execute a command. For example, "make that bold," "bold the last paragraph," "set font bold" all do the same thing, as do many more conversational commands. To know which commands work in an application, open the application and say “What Can I Say?”.
241
242
Dragon User Guide
Normal Mode (definition)
Dragon's default mode of dictation. In Normal Mode, Dragon distinguishes dictation from words, numbers, and commands by analyzing what you say between pauses. Say "Start
Normal Mode" or "Normal Mode On."
Nothing But Speech (definition)
Suppresses recognition of non-word fillers like “ums” and “ahs” that you don’t normally intend to include in your dictation.
Numbers Mode (definition)
A restricted recognition mode that causes Dragon to recognize only numbers. If you are dictating only numbers (including currencies), working in this mode increases recognition accuracy. Say "Start Numbers Mode" or "Numbers Mode On."
Performance Assistant (definition)
A resource available from the Help menu that offers suggestions for optimizing Dragon’s speed on your computer. As you click or say the corresponding links to answer questions about how you normally use Dragon, the Performance I Assistant provides suggestions and methods for optimization.
Press <key> command (definition)
Used to make keystrokes by voice. To type characters by voice, say "Press," "Press Key," or
"Type" followed by the name of the key or keys you want to press. For example, say “Press
Escape” or “Press Enter”, or “Press Ctrl Right”.
QuickStart (definition)
Allows Dragon to load in the background when you start your computer or log in to your operating system, depending on your version of Windows. When Dragon is launched in
QuickStart mode Dragon is available for use more quickly than when you start in normal mode. The microphone icon appears in the system tray.
Recognition Modes (definition)
By default, Dragon functions in Normal Mode, distinguishing dictation from words, numbers, and commands, and analyzing what it hears between pauses. Dragon also offers restricted recognition modes for dictating only commands, numbers, characters (Spell Mode), or words
(Dictation Mode).
Results Box (definition)
A floating display box that Dragon can provide as it listens to you and processes your speech. You can set options to move the Results Box anywhere on the
The Dragon Glossary
screen, keep it in one place, change its color and font size, or make it disappear after a recognition.
See About the Results Display for details.
Results Display (definition)
The on-screen feedback that Dragon displays during dictation. While Dragon listens, the
Recognition in Progress icon displays. When you pause, Dragon finishes processing your speech and enters dictation into the document or executes your command. When recognition is complete, the Dragon idle icon
displays. See also Results Box
.
The Dragon Web Extension (definition)
Enables page element commands such as "Click Link" and "Click Button" and Full Text
Control in supported browsers and Web-based applications. With the Dragon Web
Extension installed and enabled, you can dictate content and use commands just as you would in a desktop program. Without the extension, you'll need to click Web page elements using your mouse and keyboard, and dictate content using the Dictation Box.
Roaming User Profile (definition)
See Master Roaming User Profile.
Say What You See (definition)
"Say What You See" means that you can say whatever commands you see labeled on your screen to control applications by voice. For example, you can say the names of menus, menu commands, or items in a dialog box. To display the Insert menu in Microsoft Word or
Microsoft Excel, you would say "Insert," and then say the name of any of the available commands, as required. Another example is the ability to open a Desktop item (a folder, for instance), by saying “open” followed immediately by its name.
Unknown text field (definition)
An editable window or field that does not support all of Dragon's selection and correction capabilities. When the cursor is positioned in an unknown text field, the New DragonBar or
Classic DragonBar displays the message "Unknown text field; consider using 'show
Dictation Box' - See Help.'" In those cases, Dragon's Full Text Control indicator is grey. You can usually select, correct, and use various commands in unknown text fields, but if you have trouble, use the Dictation Box and transfer text from it into the application.
Windows shortcut (definition)
You can use Windows Shortcuts and command lines to open User Profiles and
Vocabularies directly .
243
244
Dragon User Guide
Spell Mode (definition)
A restricted recognition mode that causes Dragon to recognize only letters, numbers, commands, and punctuation. Spell mode is useful for dictating unpronounceable alphanumeric strings, such as part numbers and license plate numbers, and other terms you anticipate Dragon won’t know, such as Web addresses, words in a foreign language, or unusual product names. Say "Start Spell Mode" or "Spell Mode On." You can still use commands while in Spell Mode.
Spoken Form (definition)
Refers to words that are spoken one way but written a different way (the Written Form). This feature lets you add a word that, for example, types your phone number whenever you say
“phone number line,” or automatically adds punctuation, such as "UK" or "USA," which would normally include punctuation in the written forms (U.K. and U.S.A.).
Structured Commands (definition)
Used to control the action of a command based on the existence of a state in the application the command is used for. For example, when you assign a state to each field in a form, the same command can perform different actions, depending on which field is activated. You can use Advanced Scripting methods to control the states within structured commands or to set the initial state from a non-structured command. You can also create structured commands that prompt the user to select values from a predefined list. Structured Commands are available only in Dragon Professional, Legal, and Medical editions.
Text Control Indicator (definition)
The check mark icon ( ) on the Classic DragonBar or the circle icon ( ) on the New
DragonBar. The Text Control Indicator changes color to show the level of dictation support in your current application. The Text Control Indicator is green ( or ) when all of Dragon's selection and dictation capabilities are supported and gray or disabled( or ) when the insertion point is in a window that has less support for dictation.
User Profile (definition)
A User Profile is a set of files that store the following information: n
Audio system settings selected by the Check Microphone wizard n
Acoustic information about your voice gathered during initial product training, ongoing usage and when you train specific words n
Ongoing adaptations to your Vocabulary words and word usage as you use Dragon and from analysis of your writing style n
Your settings in the Options dialog box
Utterance (definition)
Dictation or commands Dragon recognizes between pauses in your speech.
The Dragon Glossary
Vocabulary (definition)
Contains all of the words that Dragon recognizes and a Language Model
. The Vocabulary
includes all of the words in the active vocabulary and the backup dictionary , and any words
added as you customize your User Profile .
Web application support (definition)
Provides the Dragon web extension
to enable commands and
for selected browser-based applications. With the Dragon web extension installed and enabled, you can dictate content and use commands just as you would in a desktop program.
Word Properties (definition)
Word Properties specify a variety of options that can be associated with Vocabulary entries.
You can specify that a word be preceded or followed by specific characters and customize properties for placement or handling. For example, question marks and exclamation marks have default properties of "Precede by (nothing)" and "Format the next word capitalized."
You can also specify one or more alternative forms for words. If the Use Printed Form 1 checkbox is selected for "meter," then when you dictate the word after a number, Dragon will enter "m" instead of "meter."If the Alternate Written Form checkbox is not selected, and you dictate "meter," Dragon types the full word, "meter."
Written Form (definition)
Specifies the word or words that Dragon enters when you dictate. The spoken form can be an easier or shorter variant or something completely different from the written form.
245
Index
Index
.
.DRA files (definition)
A
accuracy improving using Accuracy Center
using the Speed vs. Accuracy slider
Accuracy Center (definition)
Accuracy Slider (definition)
Accuracy Tuning (definition)
Acoustic Optimizer (definition)
acoustics about Acoustic and Language Model
Optimizer
optimizing activating Dragon active Vocabulary (definition)
adding contact names to the Vocabulary
words to the
Vocabulary
words with the Spelling window
additional training
addresses, dictating e-mail and Web
Advanced Scripting (definition) aligning text
Application menu applications exiting starting
starting (and utilities) switching
Auto-Formatting using Smart Format Rules
Web-based
Applying formatting to multiple instances of words
B
Backspace backup dictationary, viewing dictionary (definition)
Base Vocabulary (definition) basic document commands
Microsoft Word
Basic Text Control indicator basic text dictation browsers compatibility using
BestMatch Technology boldface applying with Direct Editing
applying with multiple text matching
boldface, applying
247
Index
248
buttons, selecting by voice
C
Canadian postal codes capitalizing text centering text characters selecting
Check Microphone position your microphone properly
Choose a speech device
choosing programs and windows clicking, using voice commands closing exiting Dragon menus programs the DragonBar
windows
Coexistence with other Dragon products
Coexistence with previous versions of
Dragon
Coexistence with the Dragon SDK Client
Edition
combining words
Command Browser about always on top finding commands
Include Global button opening training commands
Command Browser (definition)
command context showing command line interface
Command Mode switching to using
Command Mode (definition) commands application control
Command Browser controlling DragonBar
Cut Copy and Paste
dictation
displaying for a specific application
displaying Help on
Dragon Sidebar e-mail
Firefox and Internet Explorer for moving in windows forcing recognition of
Gmail hot key for if not recognized
Internet Explorer 7
Internet Explorer and Mozilla Firefox 172
Microsoft Word
Mozilla Firefox
Mozilla Firefox and Internet Explorer 172
OpenOffice Writer scrolling training
Web applications
Index
windows control
compound words joining by voice
Connecting your microphone
context showing commands for current controlling
applications
DragonBar
Internet Explorer menus the mouse windows
Copy command copying using Direct Editing using multiple text matching
Copyrights correcting text by spelling correction list deleting text handling multiple text matches methods quick reference
using Direct Editing using multiple text matching when incorrectly selected workflow
Correction-only mode (definition)
Correction menu choosing correct text in
hot key for opening
Correction menu (definition) creating new Vocabularies currency dictating cursor moving back to last location moving the insertion point moving to specific words custom words definition
Customer Service and Support customer support
Cut command cutting using Direct Editing using multiple text matching
D
Data Collection (definition)
Data Distribution Tool (definition)
dates dictating
Default Installation directories
Default Installation folders deleted words restoring to your Vocabulary deleting
characters, words, lines, paragraphs 119
last words you dictated text
text (replacing what you last dictated) 111
249
Index
250
using Direct Editing using multiple text matching words from the Vocabulary
Desktop commands dialog boxes controlling by voice selecting tabs by voice dictating
basic techniques dictating the word "select" e-mail and Web addresses
Military time numbers time
dictatingtext in non-standard windows dictation
commands correction workflow
Dictation Box settings forcing recognition of hot key for resuming source (microphone) source (recorder)
starting switching modes switching to Dictation Mode using Dictation Mode
Dictation
Dictation mode (using)
Dictation Box about commands
Dictation Box (definition)
Dictation Mode (definition)
Direct Editing commands using
Direct Editing commands (definition) directories
Dragon default disambiguation formatting or editing multiple words documents opening selecting lines and paragraphs in switching between
Don't recognize that word
using
DRA files (definition) dragging the mouse the mouse pointer
Dragon exiting system requirements
Dragon Accuracy Center (definition)
Dragon Learning Center
using
Dragon Remote Microphone application
Dragon Sidebar tabs
Dragon Templates with Voice Fields
(definition)
Index
Dragon Voice Shortcuts definition
DragonBar about controlling by voice modes using
DragonPad about starting by voice
DragonPad (definition)
E
e-mail dictating addresses supported applications working in e-mail basics editing resuming dictation editing text
revising multiple instances of words
Enter key adding new lines by voice errors correcting correcting by spelling
correction (quick reference)
Excel scrolling in
Exit
Dragon
exiting programs
F
Field (definition) files default directories
Firefox commands switching between frames five folders default setup opening fonts setting face, size, and style formatting all caps applying to multiple words
Auto-Formatting bold commands italics multiple instances of words numbers text text in Microsoft Word underlining fractions dictating frames switching
Internet Explorer and Firefox 172
251
Index
252
Full Text Control (definition)
Full Text Control indicator
G
General Training running again
Global Commands
Gmail commands for dictating with sending e-mail using with Rich Internet Application support
Go Back command
Go to and "Move to"commands
commands
Google Gmail
H
handling multiple text matches
Help using by voice
Hidden Mode (definition) hot keys hyphenating words
I
icons selecting and opening improve my accuracy
Include Global button increasing accuracy
InfoPath scrolling in inserting text insertion point
Insertion point moving installation default directories
Installation and profile creation
Installing Dragon to a custom location
Internet Explorer
and Firefox commands
commands controlling by voice switching between frames
iPad setting up as a wireless microphone
iPhone setting up as a wireless microphone
iPod Touch setting up as a wireless microphone
italics
applying
applying with Direct Editing
applying with multiple text matching
italics, applying
J
joining words
K
keys controlling the keyboard pressing by voice
Index
keystrokes sending by voice
L
language model modifying
optimizing
Language Model optimization (definition)
Language Model Optimizer (definition)
Learn From Sent E-mails tool
Start
Learning Center showing and hiding using
Learning from specific documents left aligning text lines adding new selecting list boxes controlling by voice scrolling in by voice listing open Dragon windows open windows
M
mail supported applications working in menus controlling hot key for Dragon
microphone connecting hot key for positioning handheld positioning headset
Microsoft Excel scrolling in
Microsoft Infopath scrolling in
Microsoft Office scrolling in using the ribbon
Microsoft Outlook scrolling in
Microsoft PowerPoint scrolling in
Microsoft Windows system requirements
Microsoft Word basic document commands commands for formatting text selecting text in working with
Military time minimum system requirements misrecognized commands mobile device choosing a speech device modes recognition
253
Index
254
recognition (using) mouse clicking mouse pointer dragging moving moving with MouseGrid
MouseGrid
using to position the mouse pointer
Move to commands
moving around a document
the cursor the mouse pointer
the mouse pointer with MouseGrid
to the beginning or end of a document or line
Mozilla Firefox commands switching between frames multiple text matches correcting and editing
Multiple text matching commands applying to multiple words
N
Natural Language Commands definition navigating between windows
buttons and dialog box options going back to your last location icons in documents menus
opening programs and documents
tabs in a dialog box
Web applications commands
Windows Desktop commands
new words adding a list of to the Vocabulary
adding to the Vocabulary
adding with the Spelling window
Non-standard (definition)
Non-standard windows dictating text in
Normal Mode
switching to using
Normal Mode (definition)
Nothing But Speech (definition) numbers changing format dictating forcing recognition of
Numbers Mode switching to using
Numbers mode (definition)
O
Office scrolling (in Microsoft)
Index
using the ribbon
Office ribbon using Microsoft online Help opening and using by voice opening icons by voice menus programs (and exiting) the Command Browser
OpenOffice.org Writer commands for selecting text in optimizing acoustics and language model
Outlook scrolling in
P
paragraphs adding new selecting
Paste command
Performance Assistant (definition) personalizing Vocabularies
phrases
correcting and editing multiple matches 99
Point & Speak menu hot key for pointer moving with mouse commands moving with MouseGrid
positioning text in a document postal codes dictating postcodes
PowerPoint scrolling in
Press <key> command
Press <key> command (definition) programs exiting starting switching switching between open programs and windows
Q
Quick Voice Formatting commands
(definition)
QuickStart (definition)
R
Read text to train Dragon to your voice reading and sending e-mail
Gmail
Windows Live Mail recognition
accuracy
using the Speed vs. Accuracy slider 210
accuracy: improving modes
255
Index
256
recognition errors correcting by spelling correction (quick reference) recognition modes
definition switching using
recommended system requirements
recorder choosing removing spaces between words text formatting words from the Vocabulary requirements
minimum and recommended system for Dragon resizing windows restoring plain text
Results Box (definition)
Results display (definition) resuming dictation resuming editing revising text deleting text quick reference replacing what you last dictated
revising multiple instances of words
RIA (definition)
RIA Support enabling resolving problems with
using ribbon using Microsoft Office
Rich Internet Application Support enabling resolving problems with using
Rich Internet Application support
(definition) right aligning text
Roman numerals dictating
S
Sample Commands using
Say What You See (definition)
Scratch That command scrolling in Microsoft Office programs in popular programs in windows and lists searching the online Help by voice
Select Again command selecting buttons by voice icons by voice menus tabs in a dialog box selecting text again characters and words
Index
correcting incorrectly selected text
handling multiple text matches in Microsoft Word in OpenOffice.org Writer
lines and paragraphs quick reference specific words using Direct Editing using multiple text matching
set up default directories shortcuts see Dragon Voice Shortcuts
(definition)
Sidebar tabs size setting font
Smart Format Rules disabling display
using spaces removing between words special folders opening speech device choosing speed increasing recognition
Speed vs. Accuracy slider
Spell Mode switching to using
Spell Mode (definition)
Spell That command spelling with the Spell That command words
Spelling window adding words choosing correct text in typing the correct text into
Spoken Form (definition)
Start menu, using starting programs
supplemental training support technical
switching
between open programs and windows189
between windows system requirements
T
tabs selecting in a dialog box technical support telephone numbers text dictating
aligning capitalizing correcting
correcting (quick reference)
correcting and editing multiple matches 99
cutting and pasting
257
Index
258
deleting formatting selecting
Text Control indicator
Text Control Indicator (definition) text wrapping
The recognizer has encountered an
utterance that is too long to process 210
time dictating
Tips in the Learning Center using word processors
Top 5 Ways training additional commands supplemental
training individual words and phrases 219
Tray Icon only mode
troubleshooting with RIA Support
Type <key> command
U
UK postcodes underlining applying with Direct Editing
applying with multiple text matching
undoing actions
Upgrading to Windows 7 or Windows 8
User Profiles creating recorder-based
default directories using online Help with voice commands utilities starting
V
variants correcting or formatting variants
Vocabularies adding individual words to base creating new personalizing restoring words to types of voice commands
Dragon Sidebar
W
Web applications browser compatibility commands controlling Internet Explorer
dictating addresses
Firefox commands
Internet Explorer commands
Mozilla Firefox commands switching between frames
Web application support using with Gmail
Web application support (definition) web basics
Index
windows navigating between switching between open programs and windows
Windows controlling
Desktop commands moving in open special folders resizing and closing scrolling in by voice switching between
system requirements working with
Windows Live Mail commands for reading and sending e-mail
Windows shortcut (definition)
Word basic document commands
commands for formatting text scrolling in selecting text in working with word categories adding word processors tips for using
Word Properties creating
Word Properties (definition)
words
19, 113-114, 125, 222-223, 225
adding to the Vocabulary adding with the Spelling window alternate written forms
correcting and editing multiple matches 99
deleting from the Vocabulary
formatting hyphenating
joining restoring to the Vocabulary revising selecting spelling word properties
workflow correcting text working with Microsoft Word wrapping text
Written Form (definition)
Z
Zip codes dictating
259
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 14 Web experience
- 14 Enhancing Accuracy
- 14 Compatibility Alerts
- 15 New DragonBar
- 15 Learning Center
- 15 Interactive Tutorial enhancements
- 15 Shorter Profile Creation Process
- 16 Simplified Audio Setup
- 16 Open-ended custom commands (Professional and Legal editions only)
- 16 Always replaces Ask Me as the default for deferred correction (Professional a...
- 16 Operating System support
- 17 Installation and User Profile Creation
- 18 Dragon system requirements
- 18 What you should know before installing
- 18 Installing Dragon to a custom location
- 19 Installation Prerequisites
- 20 Installing Software - Typical Installation
- 21 Installing Software - Custom Installation
- 23 Modifying application settings for all users
- 24 Modifying formatting options for all users
- 25 Creating your user profile
- 27 Setting up, positioning, and checking your microphone
- 27 Training a user profile
- 28 Upgrading User Profiles
- 31 Default installation folders
- 32 Activating Dragon
- 35 Working with Windows 8 and Windows 8.1
- 38 About Dragon
- 39 How Dragon works
- 40 Activating Dragon
- 41 Dragon system requirements
- 42 Top Ways to use Dragon
- 42 Using Dragon Help
- 43 Hot keys
- 44 Using the Dragon Learning Center
- 48 Using the Interactive Tutorial
- 48 Starting to dictate
- 48 Using the Command line interface
- 49 Auto Configuration Based on System Profile
- 50 Contacting Customer Service and Support
- 52 The DragonBar
- 57 The Text Control Indicator
- 58 Displaying the New DragonBar or Classic DragonBar
- 60 Working with the New DragonBar or Classic DragonBar
- 64 Choose an audio device
- 64 Position your microphone properly
- 66 Using the Dragon Learning Center
- 69 The Dragon Learning Center
- 72 Dictation Basics
- 73 Undoing actions
- 74 Correcting text errors as you dictate
- 75 Dictation commands
- 76 Typing or spelling text
- 77 Spelling words
- 79 Dictating numbers
- 83 Using the Dictation Box
- 85 Dictation Box Settings
- 88 About DragonPad
- 88 Changing the way text wraps on your screen
- 89 Correcting dictation - workflow
- 93 Correcting text - quick reference
- 94 Choosing the correct text
- 95 Correcting misrecognized commands
- 97 Using Direct Editing commands
- 99 Handling multiple text matches
- 103 Revising text - quick reference
- 107 Moving the insertion point
- 110 Moving to specific words
- 110 Moving to the beginning or end of a document or line
- 111 Using Go Back to move the cursor
- 113 Selecting text - quick reference
- 113 Selecting characters and words
- 114 Selecting specific words or phrases
- 115 Selecting lines and paragraphs
- 116 Selecting text again
- 116 Changing an incorrect text selection
- 118 Cutting, copying, and pasting
- 118 Deleting dictated text
- 119 Deleting characters, words, lines, or paragraphs
- 120 Deleting by backspacing
- 121 Formatting text
- 123 Formatting numbers
- 124 Setting font name, size, and style
- 124 Aligning text
- 125 Adding new lines and paragraphs
- 125 Hyphenating words
- 125 Joining words
- 126 Setting Auto-Formatting Options
- 126 Creating Word Properties
- 131 Scrolling in popular programs
- 132 Using the Microsoft Office ribbon
- 135 About spoken commands in word processing programs
- 136 Dictating in your word processor
- 137 Working with Microsoft Word
- 137 Basic document commands in Microsoft Word
- 137 Creating, opening, and closing a document
- 138 Saving a document
- 144 Selecting text
- 145 Formatting text in Microsoft Word
- 148 Supported e-mail programs
- 148 Working in e-mail programs
- 149 Commands for working with e-mail messages
- 149 Commands for moving around in e-mail
- 150 Dictating e-mail and Web addresses
- 151 Commands for Windows Live Mail
- 153 About the Dragon Web Extension
- 153 Browser requirements for the Dragon Web Extension
- 154 Installing and enabling the Dragon Web Extension
- 159 How to tell if the Dragon Web Extension is Enabled
- 161 Using Web-based Email
- 162 Editing text in a supported Web application
- 166 Using Dragon's Web capabilities without the Dragon Web Extension
- 167 If you have problems using Web application support
- 171 Working with a Web browser
- 172 Web browser commands
- 177 Internet Explorer commands
- 181 Starting and exiting programs
- 183 Using Windows Desktop commands
- 186 Controlling menus
- 186 Selecting buttons and dialog box options
- 187 Selecting tabs in a dialog box
- 187 Resizing and closing windows
- 188 Selecting and opening icons
- 188 Scrolling in windows and lists
- 189 Switching between programs and windows
- 193 Controlling the keyboard
- 195 Moving the mouse pointer
- 195 Move commands
- 195 Optional move commands
- 196 Stopping mouse movement
- 196 Positioning the mouse pointer with MouseGrid
- 197 Clicking and dragging the mouse
- 198 Clicking the mouse
- 198 Dragging the mouse
- 199 Stopping mouse movement
- 201 Top 10 ways to improve accuracy
- 203 Using Smart Format Rules
- 210 Adjusting Speed vs. Accuracy
- 211 Using the Accuracy Center
- 212 Running the Acoustic and Language Model Optimizer
- 214 Using Recognition Modes
- 216 Switching recognition modes
- 218 Training misrecognized commands
- 219 Training individual words and phrases
- 220 Supplemental training
- 222 About personalizing your Vocabulary
- 223 Adding words or phrases to your Vocabulary
- 224 Learning from specific documents
- 225 Adding words with the Spelling window
- 226 Learn From Sent E-mails
- 226 Adding contact names to the Vocabulary
- 227 Deleting words
- 228 Using the Don't Recognize That Word Command
- 229 About Vocabularies
- 231 About the Command Browser
- 232 Opening the Command Browser
- 233 Finding commands in the Command Browser
- 235 Training commands in the Command Browser