Bosch UML-082 User manual
Advertisement
Advertisement
Small Size LCD/LED Monitors
UML-080-90 | UML-082-90 | UML-100-90 | UML-102-90 en User Manual
Small Size LCD/LED Monitors
Table of Contents
Table of Contents | en 3
2
2.1
3
1
1.1
1.2
1.3
1.4
4
4.1
4.2
Safety
Important safety instructions
Safety precautions
Important notices
Customer Support and Service
Unpacking
Parts List
Exploded View
Description
Features
Power
5
5.1
5.2
5.2.1
5.2.2
5.3
5.4
5.5
5.6
5.7
Installing the Monitor
Ventilation
Mounting the Monitor
Desktop Installation
Wall Mount Installation
Connecting the Composite Video Signal to the Monitor
Connecting the Y/C (S-Video) Signal to the Monitor
Connecting Audio to the Monitor
Connecting the PC Signal to the Monitor
Single / Multiple Monitor Configuration
6
6.1
6.2
6.3
6.4
6.5
Navigating the Monitor
Navigating the Front Panel
Navigating the Monitor On-screen Display (OSD)
On-screen Display Menus
Custom Menu
Picture/Sound Menu
Bosch Security Systems, Inc.
User Manual F.01U.134.499 | 1.0 | 2009.07
28
28
29
30
30
32
23
23
23
23
24
24
25
25
26
26
17
17
18
21
21
22
8
15
5
5
8
9
10
10.1
10.2
4 en | Table of Contents
6.6
Setup Menu
7
7.1
7.2
8
Power Management
Power Consumption
LED Indicator
Troubleshooting
Maintenance
Technical Specifications
UML-080-90/UML-100-90
UML-082-90/UML-102-90
Small Size LCD/LED Monitors
34
36
36
36
37
38
39
39
40
F.01U.134.499 | 1.0 | 2009.07
User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors
1 Safety
1.1
Safety | en 5
Important safety instructions
Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit.
1.
Cleaning - Unplug the unit from the outlet before cleaning.
Follow any instructions provided with the unit. Generally, using a dry cloth for cleaning is sufficient, but a moist flufffree cloth or leather shammy may also be used. Do not use liquid cleaners or aerosol cleaners.
2.
Heat Sources - Do not install the unit near any heat sources such as radiators, heaters, stoves, or other equipment (including amplifiers) that produce heat.
3.
Ventilation - Any openings in the unit enclosure are provided for ventilation to prevent overheating and ensure reliable operation. Do not block or cover these openings.
Do not place the unit in an enclosure unless proper ventilation is provided, or the manufacturer's instructions have been adhered to.
4.
Water - Do not use this unit near water, for example near a bathtub, washbowl, sink, laundry basket, in a damp or wet basement, near a swimming pool, in an outdoor installation, or in any area classified as a wet location. To reduce the risk of fire or electrical shock, do not expose this unit to rain or moisture.
5.
Object and liquid entry - Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electrical shock. Never spill liquid of any kind on the unit. Do not place objects filled with liquids, such as vases or cups, on the unit.
6.
Lightning - For added protection during a lightning storm, or when leaving this unit unattended and unused for long periods, unplug the unit from the wall outlet and
Bosch Security Systems, Inc.
User Manual F.01U.134.499 | 1.0 | 2009.07
6 en | Safety Small Size LCD/LED Monitors disconnect the cable system. This will prevent damage to the unit from lightning and power line surges.
7.
Controls adjustment - Adjust only those controls specified in the operating instructions. Improper adjustment of other controls may cause damage to the unit. Use of controls or adjustments, or performance of procedures other than those specified, may result in hazardous radiation exposure.
8.
Overloading - Do not overload outlets and extension cords.
This can cause fire or electrical shock.
9.
Power cord and plug protection - Protect the plug and power cord from foot traffic, being pinched by items placed upon or against them at electrical outlets, and its exit from the unit.
10. Power disconnect - Units have power supplied to the unit whenever the power cord is inserted into the power source. The power cord is the main power disconnect device for switching off the voltage for all units.
11. Power sources - Operate the unit only from the type of power source indicated on the label. Before proceeding, be sure to disconnect the power from the cable to be installed into the unit.
– For battery powered units, refer to the operating instructions.
– For external power supplied units, use only the recommended or approved power supplies.
– For limited power source units, this power source must comply with EN60950. Substitutions may damage the unit or cause fire or shock.
– If unsure of the type of power supply to use, contact your dealer or local power company.
12. Servicing - Do not attempt to service this unit yourself.
Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
13. Damage requiring service - Unplug the unit from the main
AC power source and refer servicing to qualified service
F.01U.134.499 | 1.0 | 2009.07
User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors Safety | en 7 personnel when any damage to the equipment has occurred, such as:
– the power supply cord or plug is damaged;
– exposure to moisture, water, and/or inclement weather (rain, snow, etc.);
– liquid has been spilled in or on the equipment;
– an object has fallen into the unit;
– unit has been dropped or the unit cabinet is damaged;
– unit exhibits a distinct change in performance;
– unit does not operate normally when the user correctly follows the operating instructions.
14. Replacement parts - Be sure the service technician uses replacement parts specified by the manufacturer, or that have the same characteristics as the original parts.
Unauthorized substitutions may cause fire, electrical shock, or other hazards.
15. Safety check - Safety checks should be performed upon completion of service or repairs to the unit to ensure proper operating condition.
16. Installation - Install in accordance with the manufacturer's instructions and in accordance with applicable local codes.
17. Attachments, changes or modifications - Only use attachments/accessories specified by the manufacturer.
Any change or modification of the equipment, not expressly approved by Bosch, could void the warranty or, in the case of an authorization agreement, authority to operate the equipment.
Bosch Security Systems, Inc.
User Manual F.01U.134.499 | 1.0 | 2009.07
8 en | Safety
1.2
Small Size LCD/LED Monitors
Safety precautions
DANGER!
High risk: This symbol indicates an imminently hazardous situation such as “Dangerous Voltage” inside the product.
If not avoided, this will result in an electrical shock, serious bodily injury, or death.
WARNING!
Medium risk: Indicates a potentially hazardous situation.
If not avoided, this could result in minor or moderate bodily injury.
1.3
CAUTION!
Low risk: Indicates a potentially hazardous situation.
If not avoided, this could result in property damage or risk of damage to the unit.
Important notices
Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit may fall, causing serious injury and/or serious damage to the unit. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer. When a cart is used, use caution and care when moving the cart/apparatus combination to avoid injury from tip-over. Quick stops, excessive force, or uneven surfaces may cause the cart/unit combination to overturn. Mount the unit per the manufacturer's instructions.
All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at least 3 mm in each pole, into the electrical installation of the building.If it is needed to open the housing for servicing and/or other activities, use this all-pole switch as the main disconnect device for switching off the voltage to the unit.
F.01U.134.499 | 1.0 | 2009.07
User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors Safety | en 9
Coax grounding:
– Ground the cable system if connecting an outside cable system to the unit.
– Connect outdoor equipment to the unit's inputs only after this unit has had its grounding plug connected to a grounded outlet or its ground terminal is properly connected to a ground source.
– Disconnect the unit's input connectors from outdoor equipment before disconnecting the grounding plug or grounding terminal.
– Follow proper safety precautions such as grounding for any outdoor device connected to this unit.
U.S.A. models only - Section 810 of the National Electrical Code,
ANSI/NFPA No.70, provides information regarding proper grounding of the mount and supporting structure, grounding of the coax to a discharge unit, size of grounding conductors, location of discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material. Separate collecting systems are usually in place for disused electronic and electrical products. Please dispose of these units at an environmentally compatible recycling facility, per European Directive 2002/96/
EC
Electronic Surveillance - This device is intended for use in public areas only. U.S. federal law strictly prohibits surreptitious recording of oral communications.
Environmental statement - Bosch has a strong commitment towards the environment. This unit has been designed to respect the environment as much as possible.
Electrostatic-sensitive device - Use proper CMOS/MOS-FET handling precautions to avoid electrostatic discharge.
Bosch Security Systems, Inc.
User Manual F.01U.134.499 | 1.0 | 2009.07
10 en | Safety Small Size LCD/LED Monitors
NOTE: Wear required grounded wrist straps and observe proper
ESD safety precautions when handling the electrostaticsensitive printed circuit boards.
Fuse rating - For security protection of the device, the branch circuit protection must be secured with a maximum fuse rating of 16A. This must be in accordance with NEC800 (CEC Section
60).
Grounding and polarization - This unit may be equipped with a polarized alternating current line plug (a plug with one blade wider than the other blade). This safety feature allows the plug to fit into the power outlet in only one way. If unable to insert the plug fully into the outlet, contact a locally certified electrician to replace the obsolete outlet. Do not defeat the safety purpose of the polarized plug.
Alternately, this unit may be equipped with a 3-pole grounding plug (a plug with a third pin for earth grounding). This safety feature allows the plug to fit into a grounded power outlet only.
If unable to insert the plug into the outlet, contact a locally certified electrician to replace the obsolete outlet. Do not defeat the safety purpose of the grounding plug.
Moving - Disconnect the power before moving the unit. Move the unit with care. Excessive force or shock may damage the unit and the hard disk drives.
Outdoor signals - The installation for outdoor signals, especially regarding clearance from power and lightning conductors and transient protection, must be in accordance with NEC725 and
NEC800 (CEC Rule 16-224 and CEC Section 60).
Permanently connected equipment - Incorporate a readily accessible disconnect device in the building installation wiring.
Pluggable equipment - Install the socket outlet near the equipment so it is easily accessible.
Power resupply - If the unit is forced to power down due to exceeding the specified operating temperatures, disconnect the power cord, wait for at least 30 seconds, and then reconnect the power cord.
F.01U.134.499 | 1.0 | 2009.07
User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors Safety | en 11
Power lines - Do not locate the display near overhead power lines, power circuits, or electrical lights, nor where it may contact such power lines, circuits, or lights.
Rack-mount
– Ventilation - Do not place this unit in a built-in installation or rack without proper ventilation or adhering to the manufacturer's instructions. The equipment must not exceed its maximum operating temperature requirements.
– Mechanical loading - Properly mount the equipment in a
SELV rack to prevent a hazardous condition due to uneven mechanical loading.
All the input/output ports are Safety Extra Low Voltage (SELV) circuits. SELV circuits should only be connected to other SELV circuits.
Because the ISDN circuits are treated like telephone-network voltage, avoid connecting the SELV circuit to the Telephone
Network Voltage (TNV) circuits.
System ground/Safety ground
The system ground is only used to comply with safety standards or installation practices in certain countries. Bosch does not recommend connecting system ground to safety ground unless it is explicitly required. However, if the system ground and safety ground are connected and grounding loops are causing interference in the video signal, use an isolation transformer
(available separately from Bosch).
CAUTION!
Connecting System ground to Safety ground may result in ground loops that can disrupt the CCTV system.
Video loss - Video loss is inherent to digital video recording; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information. To minimize the risk of lost digital information, Bosch Security
Systems recommends multiple, redundant recording systems, and a procedure to back up all analog and digital information.
Bosch Security Systems, Inc.
User Manual F.01U.134.499 | 1.0 | 2009.07
12 en | Safety Small Size LCD/LED Monitors
NOTICE!
This is a class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.
FCC & ICES Information
(U.S.A. and Canadian Models Only)
This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions:
– this device may not cause harmful interference, and
– this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and radiates radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his expense.
Intentional or unintentional modifications, not expressly approved by the party responsible for compliance, shall not be made. Any such modifications could void the user's authority to operate the equipment. If necessary, the user should consult the dealer or an experienced radio/television technician for corrective action.
The user may find the following booklet, prepared by the
Federal Communications Commission, helpful: How to Identify
and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office,
Washington, DC 20402, Stock No. 004-000-00345-4.
F.01U.134.499 | 1.0 | 2009.07
User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors Safety | en 13
Informations FCC et ICES
(modèles utilisés aux États-Unis et au Canada uniquement)
Ce produit est conforme aux normes FCC partie 15. la mise en service est soumises aux deux conditions suivantes :
– cet appareil ne peut pas provoquer d'interférence nuisible et
– cet appareil doit pouvoir tolérer toutes les interférences auxquelles il est soumit, y compris les interférences qui pourraient influer sur son bon fonctionnement.
AVERTISSEMENT : Suite à différents tests, cet appareil s’est révélé conforme aux exigences imposées aux appareils numériques de Classe A en vertu de la section 15 du règlement de la Commission fédérale des communications des États-Unis
(FCC). Ces contraintes sont destinées à fournir une protection raisonnable contre les interférences nuisibles quand l'appareil est utilisé dans une installation commerciale. Cette appareil génère, utilise et émet de l'energie de fréquence radio, et peut, en cas d'installation ou d'utilisation non conforme aux instructions, générer des interférences nuisibles aux communications radio. L’utilisation de ce produit dans une zone résidentielle peut provoquer des interférences nuisibles.
Le cas échéant, l’utilisateur devra remédier à ces interférences
à ses propres frais.
Au besoin, l’utilisateur consultera son revendeur ou un technicien qualifié en radio/télévision, qui procédera à une opération corrective. La brochure suivante, publiée par la
Commission fédérale des communications (FCC), peut s’avérer utile : How to Identify and Resolve Radio-TV Interference Problems
(Comment identifier et résoudre les problèmes d’interférences de radio et de télévision). Cette brochure est disponible auprès du U.S. Government Printing Office, Washington, DC 20402,
États-Unis, sous la référence n° 004-000-00345-4.
Bosch Security Systems, Inc.
User Manual F.01U.134.499 | 1.0 | 2009.07
14 en | Safety Small Size LCD/LED Monitors
Disclaimer
Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in UL's Standard(s) for Safety for Closed
Circuit Television Equipment, UL 2044. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR
CERTIFICATIONS WHATSOEVER REGARDING THE
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR
SIGNALING RELATED FUNCTIONS OF THIS PRODUCT.
Disclaimer
Underwriter Laboratories Inc. (“UL”) has not tested the performance or reliability of the security or signaling aspects of this product. UL has only tested fire, shock and/or casualty hazards as outlined in UL's Standard(s) for Safety for Information
Technology Equipment, UL 60950-1. UL Certification does not cover the performance or reliability of the security or signaling aspects of this product.
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR
CERTIFICATIONS WHATSOEVER REGARDING THE
PERFORMANCE OR RELIABILITY OF ANY SECURITY OR
SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT.
Copyright
This manual is the intellectual property of Bosch Security
Systems and is protected by copyright.
All rights reserved.
Trademarks
All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.
F.01U.134.499 | 1.0 | 2009.07
User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors Safety | en 15
NOTE!
This manual has been compiled with great care and the information it contains has been thoroughly verified. The text was complete and correct at the time of printing. The ongoing development of the products may mean that the content of the user guide can change without notice. Bosch Security Systems accepts no liability for damage resulting directly or indirectly from faults, incompleteness or discrepancies between the user guide and the product described.
1.4
Customer Support and Service
If this unit needs service, contact the nearest Bosch Security
Systems Service Center for authorization to return and shipping instructions.
Service Centers
USA
Repair Center-
Telephone: 800-566-2283
Fax: 800-366-1329
E-mail: [email protected]
Customer Service
Telephone: 888-289-0096
Fax: 585-223-9180
E-mail: [email protected]
Technical Support
Telephone: 800-326-1450
Fax: 585-223-3508 or 717-735-6560
E-mail: [email protected]
Canada
Telephone: 514-738-2434
Fax: 514-738-8480
Europe, Middle East, Africa Region
Repair Center
Telephone: 31 (0) 76-5721500
Fax: 31 (0) 76-5721413
E-mail: [email protected]
Bosch Security Systems, Inc.
User Manual F.01U.134.499 | 1.0 | 2009.07
16 en | Safety Small Size LCD/LED Monitors
Asia Region
Repair Center
Telephone: 65 63522776
Fax: 65 63521776
E-mail: [email protected]
Customer Service
Telephone: 86 (0) 756 7633117 or
86 (0) 756 7633121
Fax: 86 (0) 756 7631710
E-mail: [email protected]
Warranty and more information
For additional information and warranty queries, please contact your Bosch Security Systems representative or visit our website at www.boschsecurity.com.
F.01U.134.499 | 1.0 | 2009.07
User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors
2 Unpacking
Unpacking | en 17
This equipment should be unpacked and handled with care. If an item appears to have been damaged in shipment, notify the shipper immediately.
Verify that all the parts listed in the Parts List below are included. If any items are missing, notify your Bosch Security
Systems Sales or Customer Service Representative.
The original packing carton is the safest container in which to transport the unit and must be used if returning the unit for service. Save it for possible future use.
2.1
Parts List
1
1
Quantity Description
1 Color LCD Flat Panel Monitor
1 Installation Manual (printed booklet, English
1
2 version)
Installation manual (CD-ROM, multi-language version)
Power Cords, 3-wire with grounded plug 1.8 m (6 ft) long: one with a U.S plug type and one with a
European Continental plug type
VGA to VGA (D-Sub) cable, 1.5 m (5 ft)
Trigger cable
Bosch Security Systems, Inc.
User Manual F.01U.134.499 | 1.0 | 2009.07
18 en | Exploded View
3 Exploded View
Small Size LCD/LED Monitors
Figure 3.1
Front Panel
Ref. Button
1
2
3
4
5
6
7
8
9
Speaker
Input
Menu
Description
Generate sounds from the input audio signal.
Selects the signal to be displayed.
Serves as the “Enter” function for OSD menus.
Selects the on-screen display (OSD).
Adjusts the value when in the Scrolls up in the OSD.
OSD.
Adjusts the value when in the
OSD or auto adjusts when in
PC mode.
Decreases the value when in the OSD.
Increases the value when in
Power the OSD.
Display Power (On/Off)
LED Indicator Power On (green)
Power Off, Standby (red)
Scrolls down in the
OSD.
Scrolls left in the OSD.
Scrolls right in the
OSD.
F.01U.134.499 | 1.0 | 2009.07
User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors Exploded View | en 19
Figure 3.2
Rear Panel (UML-080-90, UML-082-90)
Ref Connector Ref Connector
1 Audio In (for external audio) 7 S-Video In
2 AV1 In
3 AV1 Out
8
9
12 VDC In
Adjustable Stand
4
5
AV2 In
AV2 Out
6 VGA In
10 Trigger Input
11 RS-232 In (for firmware update)
Bosch Security Systems, Inc.
User Manual F.01U.134.499 | 1.0 | 2009.07
20 en | Exploded View Small Size LCD/LED Monitors
Figure 3.3
Rear Panel (UML-100-90, UML-102-90)
Ref Connector Ref Connector
1 Audio In (for external audio) 7 S-Video In
2 AV1 In
3 AV1 Out
8
9
12 VDC In
Adjustable Stand
4
5
AV2 In
AV2 Out
6 VGA In
10 Trigger Input
11 RS-232 In (for firmware update)
F.01U.134.499 | 1.0 | 2009.07
User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors
4 Description
Description | en 21
The Bosch line of High Performance LCD/LED monitors are highly reliable display devices that combines the flexibility of signal connectivity and ease of operation. With the AV, Y/C (S-
Video) and VGA terminals you can connect this monitor to a variety of devices like CCTV video cameras or a PC. The trigger signal input function allows you to implement the trigger warning mechanism easily with compatible CCTV video cameras. The multi-language On-screen Display (OSD) menu system provides an intuitive and convenient interface where you can easily change the settings of this monitor. An adjustable stand is provided so you can easily adjust the angle of the screen display when this monitor is placed on a table.
Alternatively you can also wall-mount this monitor using the mounting screw holes on the rear panel of the monitor and a suitable wall mounting bracket.
4.1
Features
– 8.4-in. and 10.4-in. models
– LED backlight models (UML-082-90, UML-102- 90) or CCFL models (UML-080-90, UML-100-90)
– NTSC/PAL Auto-Detect
– VGA Input
– 640 x 480
– 800 x 600
– 1024 x 768
– Composite Video Input
– Y/C Input (S-Video)
– Trigger input
– Multi-language On-screen Display (OSD)
Bosch Security Systems, Inc.
User Manual F.01U.134.499 | 1.0 | 2009.07
22 en | Description Small Size LCD/LED Monitors
4.2
Power
Model No.
Rated Voltage Voltage
UML-080-90 120/230 VAC
Power at Rated Sync Format
Range Voltage
100 to 240 V < 35 W NTSC/PAL
50/60 Hz
UML-100-90 120/230 VAC
50/60 Hz
UML-082-90 120/230 VAC
50/60 Hz
UML-102-90 120/230 VAC
50/60 Hz
100 to 240 V < 35 W
100 to 240 V < 35 W
100 to 240 V < 35 W
NTSC/PAL
NTSC/PAL
NTSC/PAL
F.01U.134.499 | 1.0 | 2009.07
User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors
5 Installing the Monitor
Installing the Monitor | en 23
This chapter outlines the procedures to install the UML-080-90,
UML-100-90, UML-082-90 or the UML-102-90 Monitor. A qualified service person should install the monitor and adhere to all local codes.
5.1
5.2
5.2.1
Ventilation
To prevent overheating, ensure that the ventilation openings on the rear of the monitor are not covered.
Mounting the Monitor
The UML-080-90, UML-100-90, UML-082-90 and the UML-102-
90 are designed for use on a desktop or mounted to a wall or rack.
Desktop Installation
The Bosch High Performance monitors are delivered with a 3pole US-style power cord and a 3-pole Euro-style power cord.
Use the US-style power cord where 120 VAC, 60 Hz power is available; use the Euro-style power cord where 230 VAC, 50 Hz power is available. The monitor automatically adjusts to either power input voltage. The viewing angle of the LCD can be adjusted to fit the most comfortable monitoring status.
Figure 5.1
Maximum degree = 35°
NOTICE!
The suggested bracket angle for the best viewing quality and holding support is between 25° to 35°.
Bosch Security Systems, Inc.
User Manual F.01U.134.499 | 1.0 | 2009.07
24 en | Installing the Monitor
5.2.2
Wall Mount Installation
Small Size LCD/LED Monitors
This monitor can be wall-mounted using the square mounting holes (75 mm [2.95 in.] centers) and a suitable wall mount or swivel/tilt mount.
5.3
Figure 5.2
Location of mounting holes
Connecting the Composite Video Signal to the Monitor
There are two (2) BNC connectors located on the rear side panel of the monitor for composite video inputs and two (2)
BNC connectors for composite video outputs (see Figure 3.2 and Figure 3.3).
Note: All video inputs are passive loop-through. The impedance is automatically set to 75 Ohm by the input of the signal on the input connector, while operating in a single connection mode
(see Figure 5.5). If a cable is also connected to the output connector, the video signal can be passed on to another monitor connected to it via the passive loop-through function.
F.01U.134.499 | 1.0 | 2009.07
User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors Installing the Monitor | en 25
Up to three (3) monitors may be connected in this manner (see
Figure 5.6).
Note: To select between AV1 and AV2, press Input (see
Figure 3.1, Item 2) located on the front of the monitor.
5.4
Connecting the Y/C (S-Video) Signal to the
Monitor
There is one (1) mini-DIN type connector for the S-Video (Y/C) input (see Figure 3.2 and Figure 3.3) on the rear side panel.
Note: Both Y and C inputs are terminated with 75 Ohm.
5.5
Figure 5.3
Y/C Connector pin-out
2
3
Number Input
1 Ground
4
Ground
Y-signal
C-signal
Connecting Audio to the Monitor
There is one (1) set of stereo audio connectors for audio input, located on the rear panel.
This audio input is not associated with any input terminals on the rear panel, and can be freely connected to any audio input.
Bosch Security Systems, Inc.
User Manual F.01U.134.499 | 1.0 | 2009.07
26 en | Installing the Monitor
5.6
Small Size LCD/LED Monitors
Connecting the PC Signal to the Monitor
You can connect a PC signal to the monitor using the VGA connector on the rear panel and a VGA cable (D-SUB to D-SUB).
Figure 5.4
VGA Input
Pin Description
1 Red Video
Pin Description
6 Red Ground
2 Green Video 7 Green Ground
3 Blue Video 8 Blue Ground
4 Ground
5 Ground
Pin Description
11
12
13
Ground
SDA (for DDC)
H-Sync or H+V Sync
9 N/A 14 V-Sync
10 Signal Cable Detect 15 SCL (for DDC)
5.7
Single / Multiple Monitor Configuration
Figure 5.5
Single Monitor Configuration
Ref Description Ref Description
1 Video Camera 3 AV1 Out
2 AV1 In 4 DVR
F.01U.134.499 | 1.0 | 2009.07
User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors Installing the Monitor | en 27
Figure 5.6
Multiple Monitor Configuration
2
3
Ref Description
1 Video Camera
AV1 In
AV1 Out
Bosch Security Systems, Inc.
User Manual F.01U.134.499 | 1.0 | 2009.07
28 en | Navigating the Monitor
6 Navigating the Monitor
Small Size LCD/LED Monitors
6.1
Navigating the Front Panel
Use the front panel to make any necessary OSD adjustments to the UML-080-90, UML-100-90, UML-082-90 or the UML-102-90.
See the figure below for an explanation of the front panel.
Figure 6.1
Front Panel Buttons
Ref. Button
1
2
3
4
5
6
7
8
9
Speaker
Input
Menu
Description
Generate sounds from the input audio signal.
Selects the signal to be displayed.
Serves as the “Enter” function for OSD menus.
Selects the on-screen display (OSD).
Adjusts the value when in the Scrolls up in the OSD.
OSD.
Adjusts the value when in the
OSD or auto adjusts when in
Scrolls down in the
OSD.
PC mode.
Decreases the value when in the OSD.
Increases the value when in
Power the OSD.
Display Power (On/Off)
LED Indicator Power On (green)
Power Off, Standby (red)
Scrolls left in the OSD.
Scrolls right in the
OSD.
F.01U.134.499 | 1.0 | 2009.07
User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors
6.2
Navigating the Monitor | en 29
Navigating the Monitor On-screen Display
(OSD)
The UML-080-90, UML-100-90, UML-082-90 and the UML-102-
90 have two (2) modes: Video and PC. The LCD is programmed through the on-screen display (OSD) menus and submenus where an operator can select operating parameters. To access the OSD menus, press the Menu button on the front panel. Use the front panel of the monitor to make any necessary adjustments to the OSD.
NOTICE!
When you are navigating through the OSD menus, use the Input button to select a menu and use the Menu button to exit a menu.
To navigate the set up menus, follow the steps below:
1.
Connect the CVBS, S-Video or the VGA cable.
2.
Press the Power button to turn on the unit (see
Figure 6.1).
3.
If required, press the Input button and the and buttons until a signal is displayed.
4.
Press the Menu button to activate the main menu selections (see Figure 6.1).
5.
Press the and buttons to select a menu.
6.
Press the Input button to enter the selected menu.
7.
Press the and buttons to select a sub-menu item.
8.
Press the Input button to enter the selected sub-menu.
9.
Press the and buttons to toggle the OSD values.
10. Press the Menu button to exit the selected menu and to return to the menu bar or to confirm a selection.
11. Press the Menu button again to exit the OSD menu bar.
Bosch Security Systems, Inc.
User Manual F.01U.134.499 | 1.0 | 2009.07
30 en | Navigating the Monitor
6.3
Icon
On-screen Display Menus
Small Size LCD/LED Monitors
There are three (3) on-screen menus that allow you to customize your settings. Press the Menu button to access the
OSD menu.
Menu
Custom
Function
Adjusts the Brightness, Contrast, Color, Tint and the Sharpness level for video performance. (The menu options differ between the Video and PC modes.)
Picture/Sound Adjusts the Picture Mode, Color Tone, Mute,
Volume, Size, Overscan, DNR and the PC settings.
(The menu options differ between the Video and
Setup
PC modes.)
Enables user to Reset the factory default settings and to adjust the Language, OSD Tone, Blue
Screen, Key Lock, Trigger and the Auto Switch settings.
6.4
Custom Menu
To access the Custom menu, press the Menu button on the front panel of the monitor. Next, press the Input button and then press the up and down buttons to select a submenu. Press the Input button to enter the submenu, and then press the up and down buttons to change the values. When finished, press the Menu button to save any changes, then press the Menu button again to exit the OSD.
F.01U.134.499 | 1.0 | 2009.07
User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors Navigating the Monitor | en 31
Custom
Brightness
Contrast
Color
Tint
Sharpness
:Move :Input
Table 6.1
Custom Menu (Video Mode)
:Menu
Custom
Brightness
Contrast
50
50
50
50
50
50
50
:Move :Input
Table 6.2
Custom Menu (PC Mode)
:Menu
Submenu Definition
Brightness Adjusts the brightness level for video performance (range 0-100).
Contrast
Color
Adjusts the contrast level for video performance (range 0-100).
Adjusts the overall intensity of the screen (range 0-100).
Tint Adjusts the tint of the picture (range 0-100). NTSC only.
Sharpness Adjusts the sharpness level for video performance (range 0-100).
Bosch Security Systems, Inc.
User Manual F.01U.134.499 | 1.0 | 2009.07
32 en | Navigating the Monitor
6.5
Picture/Sound Menu
Small Size LCD/LED Monitors
To access the Picture / Sound menu, press the Menu button on the front panel of the monitor, then press the up and down buttons to select the Picture / Sound icon. Press the Input button to enter the menu, and then press the up and down buttons to select a submenu
Picture/Sound
Picture Mode
Color Tone
Mute
Volume
Size
Overscan
DNR
3D Comb
:Move :Input :Menu
Table 6.3
Picture/Sound Menu (Video Mode)
Standard
6500°K
Off
20
4:3
On
On
Picture/Sound
Picture Mode
Color Tone
Mute
Volume
PC
Standard
6500°K
Off
20
:Move :Input :Menu
Table 6.4
Picture/Sound Menu (PC Mode)
F.01U.134.499 | 1.0 | 2009.07
User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors Navigating the Monitor | en 33
Submenu
Picture Mode
(Video Mode)
Definition
Selects the automatic picture control mode. Choices are:
Custom: User selected values of the Custom menu are applied.
Dynamic: Automatically adjusts the Brightness, Contrast, and
Sharpness, maximizing the video quality in the picture.
Standard: Applies factory default values.
Picture Mode
(PC Mode)
Selects the automatic picture control mode. Choices are Custom, High,
Middle and Low.
Color Tone
Selects the color temperature. Choices are: 6500°K, 7500°K and
9300°K.
Mute
Enables/disables audio. Choices are: On and Off.
Volume
Size (Video
Mode)
Overscan
(Vide Mode)
Controls built-in speaker output volume (range 1-9).
Selects the Aspect Ratio Control mode. Choices are: 4:3, Panorama,
Zoom1 and Zoom2.
Adjusts the overscan settings when displaying video (non-PC) signals:
H-Overscan: Adjusts the horizontal overscan size (range 1-9).
V-Overscan: Adjusts the vertical overscan size (range 1-9).
H-Phase: Adjusts the horizontal phase of the overscanned picture
(range 1-9).
V-Phase: Adjusts the vertical phase of the overscanned picture (range
1-9).
DNR (Video
Mode)
Turns Noise Reduction On or Off. Turning this feature OFF reduces the video quality slightly, but improves the monitors response time to
MOTION.
PC (PC Mode)
3D Comb
Selects between Auto or manual adjustment of the desktop screen. Auto
Adjust: Auto synchronizes screen to graphics adaptor.
Manual choices are: Phase (range 0-100), H-Phase (range 0-100), V-
Phase (range 0-100) and Frequency (range 0-100).
Enables or disables the 3D comb filter.
Bosch Security Systems, Inc.
User Manual F.01U.134.499 | 1.0 | 2009.07
34 en | Navigating the Monitor
6.6
Setup Menu
Small Size LCD/LED Monitors
To access the Setup menu, press the Menu button on the front panel of the monitor, then press the up and down buttons to select the Setup icon. Press the Input button to enter the menu, and then press the up and down buttons to select a submenu.
Setup
Reset
Language
OSD Tone
Blue Screen
Key Lock
Trigger
Auto Switch
Firmware Version
English
On
Off
Off
X.X
Submenu
Reset
Language
OSD Tones
Blue Screen
Key Lock
:Move :Input
Table 6.5
Setup Menu
:Menu
Definition
Restores default settings.
Adjusts the language of the OSD. Choices are: Chinese, Dutch,
English, French, German, Italian, Polish, Portuguese, Russian, and
Spanish.
Selects the type of background for the OSD menu. Choices are:
Transparency and On.
Enables or disables video loss indication. Choices are:
On: displays a blue background when video loss is detected.
Off: displays a black backgound when video loss is detected.
Enables or disables the Key Lock function.
F.01U.134.499 | 1.0 | 2009.07
User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors Navigating the Monitor | en 35
Trigger Enables or disables the Trigger function, and configures the trigger settings when enabled:
Trigger Enable: Turns the Trigger function On of Off.
Trigger Input: Selects the input signal source to display when a trigger signal is received.
Buzzer: Turns the trigger buzzer tone On or Off.
Trigger Time: Sets the time duration the trigger input (as set by the
Trigger Input function) is displayed. Once the time expires, the monitor will automatically switch back to the last viewed input.
Trigger Option: sets the trigger signal type to N/C (normal closed),
Auto Switching
N/O (normal opened), High (2~5V) or Low (0~0.6V).
Enables or disables the auto switch function that allows the monitor to automatically switch to and display an available input signal.
Firmware Version Displays the release level of the monitor firmware.
NOTICE!
When key lock is enabled through the front panel, use the front panel buttons to disable the key lock command. To disable the key lock feature using the front panel buttons, press and hold both the Input and the Menu buttons until the monitor displays the Key Unlocked message.
Bosch Security Systems, Inc.
User Manual F.01U.134.499 | 1.0 | 2009.07
36 en | Power Management
7 Power Management
Small Size LCD/LED Monitors
These monitors feature a power management system to “power down” upon receipt of the display power management signaling
(DPMS) from a DPMS video card.
The DPMS-compliant video card performs this signaling by not sending a horizontal, vertical, or a sync signal.
The monitor enters an appropriate mode through identifying each of the three (3) modes of the signaling system.
7.1
Power Consumption
Mode
ON
STANDBY
ACTIVE OFF
Power Consumption
35 W
2 W
1 W
7.2
LED Indicator
The power management feature of the monitor is comprised of these stages:
Mode
ON
STANDBY
ACTIVE OFF
UNSUPPORTED MODE Green
POWER OFF
LED Color Monitor Operation
Green Normal Operation
Flashes Red Screen blanks after idle time and
Red some electronic circuits or all circuitry in the monitor shuts down.
Normal operation but the screen displays an error message.
Not Operational
F.01U.134.499 | 1.0 | 2009.07
User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors Troubleshooting | en 37
8 Troubleshooting
Problem
No image displayed on screen
Solution
– Check that the power cord of the monitor is securely connected into the wall outlet or grounded extension cable or strip.
– Power switch should be in the ON position and the
The message "No Signal" is
LED lit.
– Check that the Brightness and/or Contrast adjustments of the display have not been turned down to minimum levels.
– The signal cable should be completely connected to displayed the video card/computer.
– The video card should be completely seated in its slot and the computer switched ON.
Push the down key to activate the Auto Adjust function.
Display image is not centered, is too small or too - or large in the PC mode Adjust the Frequency and Phase in the PC OSD submenu.
Vertical or horizontal noise is Push the down key to activate the Auto Adjust function.
present in the picture
Incorrect colors
The error message “Out of
Range” is displayed
- or -
Adjust the Frequency and Phase in the PC OSD submenu.
Select 6500°K, 7500°K or 9300°K in the Color Tone menu.
- or -
Use the Reset function to reset to the default settings.
PC is operating with either a resolution or timing mode that is not supported by the monitor. Change the PC timing mode to one of the valid combinations below:
– 640 x 480; 60/72/75 Hz
– 800 x 600; 60/72/75 Hz
– 1024 x 768; 60/70/75 Hz
Bosch Security Systems, Inc.
User Manual F.01U.134.499 | 1.0 | 2009.07
38 en | Maintenance
9 Maintenance
Small Size LCD/LED Monitors
To clean the LCD panel, wipe off water droplets or oil immediately with absorbent cotton or a soft lint-free cloth.
Staining and discoloration may occur if left on the panel for long periods. If the surface (polarizer) of the LCD panel is dirty or stained, use absorbent cotton or a soft lint-free cloth to remove the residue as follows:
1.
Turn off the display and disconnect it from the power supply.
2.
Do not spray any liquid directly on the screen. Dampen a clean, soft, lint-free cloth with water only (using a paper towel or dirty cloth can scratch the screen).
3.
Gently wipe the screen starting from the top of the screen to bottom wiping in a downward motion. Be careful not to press too hard to avoid damaging the screen.
4.
To avoid streaking, wipe the screen again with another clean, dry, lint-free cloth.
NOTICE!
If water does not work, use a mild cleaner labeled for use with
LCD panels, available at office supply stores.
Do not use any of the following as a cleaning agent:
– Ketone type materials
– Ethyl alcohol
– Ethyl acid
– Toluene
– Methyl chloride
– Ammonia
Use of these materials may permanently damage the polarizer due to a chemical reaction.
F.01U.134.499 | 1.0 | 2009.07
User Manual Bosch Security Systems, Inc.
Small Size LCD/LED Monitors
10
Technical Specifications | en 39
Technical Specifications
10.1
UML-080-90/UML-100-90
Model
LCD Specifications
LCD Type
Backlight Type
Pixel Pitch (H x V)
Brightness
Contrast Ratio
Response Time
Resolution (H x V)
Frequency
Input Signal
UML-080-90 UML-100-90
8.4 in. Digital LCD
CCFL
0.213 x 0.213 mm
250 cd/m
2
(typical)
600:1 (typical)
10 ms (typical)
800 x 600
Horizontal: 31 - 48 KHz
10.4 in. Digital LCD
CCFL
0.264 x 0.264 mm
230 cd/m
2
(typical)
500:1 (typical)
20 ms (typical)
800 x 600
Horizontal: 31 - 48 KHz
Vertical: 56 - 75 Hz Vertical: 56 - 75 Hz
Video (BNC 2ch input 1.0 Vp-p, 75 Ohm terminated, loopthrough out)
S-Video (Mini Din 4-pin 1ch input (Y/C))
Audio In (L/R)
Trigger In
Active Display Area (H x V) 170.4 x 127.8 mm
Packing Dimensions 503 x 349 x 343 mm
Weight
Electric Ratings
(19.8 x 13.7 x 13.5 in.)
1.16 kg (2.56 lb)
12 VDC, 2.5 A
211.2 x 158.4 mm
503 x 349 x 343 mm
(19.8 x 13.7 x 13.5 in.)
1.53kg (3.37 lb)
12 VDC, 2.5 A
Bosch Security Systems, Inc.
User Manual F.01U.134.499 | 1.0 | 2009.07
40 en | Technical Specifications Small Size LCD/LED Monitors
10.2
UML-082-90/UML-102-90
Model
LCD Specifications
LCD Type
Backlight Type
Pixel Pitch (H x V)
Brightness
Contrast Ratio
Response Time
Resolution (H x V)
Frequency
Input Signal
UML-082-90 UML-102-90
8.4 in. Digital LCD
LED
0.213 x 0.213 mm
450 cd/m
2
(typical)
600:1 (typical)
10 ms (typical)
800 x 600
Horizontal: 31 - 48 KHz
10.4 in. Digital LCD
LED
0.264 x 0.264 mm
400 cd/m
2
(typical)
700:1 (typical)
20 ms (typical)
800 x 600
Horizontal: 31 - 48 KHz
Vertical: 56 - 75 Hz Vertical: 56 - 75 Hz
Video (BNC 2ch input 1.0 Vp-p, 75 Ohm terminated, loopthrough out)
S-Video (Mini Din 4-pin 1ch input (Y/C))
Audio In (L/R)
Trigger In
Active Display Area (H x V) 170.4 x 127.8 mm
Packing Dimensions 503 x 349 x 343 mm
Weight
Electric Ratings
(19.8 x 13.7 x 13.5 in.)
1.20 kg (2.65 lb)
12 VDC, 2.5 A
211.2 x 158.4 mm
503 x 349 x 343 mm
(19.8 x 13.7 x 13.5 in.)
1.59 kg (3.51 lb)
12 VDC, 2.5 A
F.01U.134.499 | 1.0 | 2009.07
User Manual Bosch Security Systems, Inc.
Bosch Security Systems, Inc.
850 Greenfield Road
Lancaster, PA 17601
U.S.A.
Telephone +1 800-566-2283
Fax +1 800-366-1329 www.boschsecurity.com
© Bosch Security Systems, Inc., 2009, Data subject to change.

Public link updated
The public link to your chat has been updated.
Advertisement