Afikim Breeze C4 User manual

The Senior Class Lifestyler
User Manual
Read the User’s Manual carefully before operating the Breeze S.
If you do not fully understand any part of this Manual,
Please contact your dealer or any of our Service Center.
Read this manual step by step, as injury or damage may occur from misuse!
Electromagnetic Interference (“EMI”) can cause powered vehicles to behave
erratically, which could be dangerous to the user.
For your safety and protection, it is IMPERATIVE that you take time to read
Chapter 6 (“EMI WARNING”) before operating the Breeze S.
Serial Number and Manufacturer’s data are fixed at the front area, on the
plastic Mud Guard cover on the metal Label of the Breeze S.
(See 4.6 in figure 3, page 20)
AFIKIM ELECTRIC VEHICLES strives continuously to improve its products,
their quality and reliability in an incessant effort to ensure its customers’
satisfaction as well as its place on the market.
Warranty for the Breeze S is subject to your local distributor's warranty.
The Afikim Electric Vehicles Ref. Registration Number with the
Competent Authority (UK) Is: CA000292.
Our Authorized Representative with the Competent
Authorities is:
Stanmore, Middlesex, HA7 4YA, England
TEL/FAX: 0044-181-954-9964
Congratulations on choosing the Breeze S as your electrically powered
The Breeze S is a scooter for Elderly and Disabled persons, Fun and Sport.
Scooter classification: Class C with according to EN12184.
The Breeze S is designed to a maximum occupant mass of 160Kg (352lbs)
with 3 Wheels and200Kg (440lbs) with 4 Wheels.
The Breeze S is an outdoor scooter designed to work in normal environment
conditions from very cold areas of (-30ºC, -22ºF) and up to very hot areas up
to (+45ºC, +113ºF).
The Breeze S will operate in light splashing rain, but it is not recommended
to use the Breeze S at heavy rain or snow conditions for long period.
The Breeze S is easy to operate. The relatively large wheels enable driving
on unpaved roads, over medium rough terrain and to overcome obstacles as
high as 5” (12 cm).
Pressure inflating of the tires can found in the technical specification table.
The Breeze S can climb maximum slopes angles of 20% (11.3º).
The braking system stops the Breeze S smoothly and a short distance after
the Operating (Speed) Lever is released.
The Breeze S is equipped with both Front and Rear Shock Absorbers to give
the user the most comfort and soft driving, even when using the vehicle at
medium rough terrain roads.
A standard hand brake is also provided for backup.
The Seat is spacious, comfortable and can
be rotated for easy access (standard Seats)
and adjusted forward/reverse up/down for
most fitness to the user.
All controls are conveniently located on the
tiller and handlebar and are simple to
Under normal conditions the Breeze S can
travel approximately 45 km (30 miles) on
level surface before the batteries require
After reading through all this manual, before
start using the Breeze S, do a visual check
through the all parts of the vehicle, to make
sure that no external damage has been occur
to the vehicle while transportation. In any case you are not sure call your
dealer and ask for an explanation.
The Breeze S is developed to use dry / gel batteries only.
A Maintenance Manual is available for trained technicians.
WARNING! An authorized supplier or qualified technician
must perform the initial setup of this scooter and must
perform all of the procedures in this manual.
The symbols below are used throughout this owner's manual and on
the scooter to identify warnings and important information. It is very
important for you to read them and understand them completely.
WARNING! Indicates a potentially hazardous condition /
situation. Failure to follow designated procedures can
cause either personal injury, component damage, or
On the product, this icon is represented as a black symbol
on a Triangle shape.
MANDATORY! These actions should be performed as
specified. Failure to perform mandatory actions can cause
personal injury and/or equipment damage. On the product,
this icon is represented as a white symbol on a dark
PROHIBITED! These actions are prohibited. These actions
should not be performed at any time or in any
circumstances. Performing a prohibited action can cause
personal injury and/or equipment damage. On the product,
this icon is represented as a black symbol with a circle and slash.
Please note and strictly adhere to the following Safety Instructions.
Additional Warnings and Notices are printed in this User’s Manual;
it is imperative that you read carefully all chapters of this Manual
before operating the Breeze S. It is also advisable to refresh your
memory by re-reading this Manual periodically.
Get acquainted with the Breeze S and its operational features
before driving it.
Drive slowly (Place Speed Limit knob in mid speed position) until
you get used to the Breeze S, to its various functions, safety
features, and to its braking capabilities and limitations.
Watch carefully for pedestrians and drive your Breeze S
accordingly. In crowded areas always drive with the Speed Limit
knob at half Speed.
Drive only where permitted according to all applicable local laws
and ordinances. Breeze S is 65 cm (25.5") width. Pay special
attention not to hit persons or any objects around the vehicle.
Never remove any of the Breeze S safety parts like Fenders,
Plastic Covers or Emergency Brake lever.
Never remove any of the Warnings Labels. If any of the Warning
labels is removed, got wear, painted etc. ask your dealer to supply
you a new labels.
Never put your hands, fingers, legs into any moving parts or under
any protection cover, since moving parts are under covers and
heated surfaces as well.
When adjusting/folding the seat back, armrest, seat sliders (forward
/ reverse), tiller distance and as well when squeezing the speed
lever or hand brake, always be careful that your hands and fingers
will not be trapped between any of the moving parts.
Beware from trapping your fingers in the tiller mechanism, when
adjusting the tiller – Forward / Reverse.
Never load the Breeze S total loads (User weight and all other
loads combined) more than 160Kg (352lbs) or 200Kg (440lbs)
depend on the model including all the baskets.
The load in the Rear Basket should not exceed 10 kg (22 lbs).
The load in the Front Basket should no exceed 8 kg (17.6lbs).
The Breeze S is designed and built to carry ONE person only on the Single Seat
model. Never operate it with an additional person on board, not even a child.
Never inflate the Breeze S tires more than recommended
on the tires by the manufacturer.
Never use the Breeze S for climbing up or riding down stairs.
Never try to go an obstacle that is more than the maximum
recommended slope angle and curb climbing in the specification
When climbing an Obstacle drive always so that the Breeze S
Front is toward the obstacle.
If for any reason the Breeze S does not stop when you release the
Operating Lever, or stopped after longer distance than regular or
higher than 3 meters (level surface) , immediately use the Hand
Brake to stop the Breeze S and turn the Main Key Switch to “OFF”.
Contact your dealer immediately.
Do not use the Breeze S neither at heavy rain or extreme humidity
conditions nor at temperatures below -30ºC (-22ºF) or above
+45ºC (+113ºF).
The seat weight is 15 Kg (33lbs). Each battery weight 14 Kg
(31lbs) and more. Be careful when lifting the seat and the
See instruction for lifting in Chapter 3: Maintenance and Chapter 5:
Repair and troubleshooting. Keep lifting using your Knees/legs and
not loading your Back.
If the Breeze S is involved in any kind of an accidents
that parts are damaged, it is necessary to check the
vehicle by qualified technician before go on using it.
Batteries contain lead and acid which is very corrosive.
Batteries should be disposed only to a proper disposal.
When driving always make sure, that the backrest is in
most upright position.
Use Lead Acid gel / dry batteries only.
WARNING !!! Special care must be taken to prevent children
from operating the Breeze S.
Do not allow unsupervised children to play near the Breeze S
scooter while the batteries are charging.
Always drive carefully, adjust the speed according the
limitation of the road.
Instability problem can arise when performing turns at high
speed. Before making sharp turns, reduce the Breeze S speed
to minimum to prevent side roll-over.
The Breeze S is able to go up slope higher than the
recommended safe slope. Do not drive on slopes you are not
sure about their angle. However drive very slowly and prevent
side driving on such slopes.
Before start driving make sure your emergency brake is tight
and operate properly.
Do not release the Manual or
Electrical Release Lever of the
Electromagnetic Brake when
the Breeze S is on a slope.
When on any sort of an incline or
decline, never place the Breeze S
scooter in freewheel mode while
seated on it or standing next to it.
The lights of the Breeze S should be on when visibility
is restricted, either by day or by night.
Since your seat upholstery is Fire resistant, do not cover or
replace with other upholstery than an original one.
When removing the Batteries cover be careful from hot parts.
The Motor, Transaxle, EMB, Electronic cards and electronic
controller might be warmed, Do not touch them before you
make sure about their temperature.
Pay attention that your fingers will not be pressed
between the levers and the Rubber Grip.
Do not use a cell phone, walkie / talkie, laptop, or other radio
transmitter while operating the Breeze S.
Removal of grounding prong can create electrical hazard. If
necessary, properly install an approved 3-pronged adapter to an
electrical outlet having 2-pronged plug access.
Do not connect an extension cord to the AC or DC
converter or the battery charger.
Keep tools and other metal objects away from battery terminals.
Contact with tools can cause electrical shock.
Do not sit on the mobility product when it is being used in
connection with any type of lift/elevation product.
Explosive conditions exist!
Disposal and recycling-Contact your authorized Provider for
information on proper disposal of your Breeze S product and its
Wear safety glosses.
Contains Lead.
Battery charger for indoor use only.
Flammable material. Do not expose to open flame.
At the rear of the Breeze S you can find the electromagnetic brake
manual release lever. When using this lever be careful not to touch
the internal surface of the motor, they could be very hot and cause
injure. See the warning label at the rear of the scooter near the lever.
MANDATORY! Do not operate your new Breeze S scooter for the
first time without completely reading and understanding this owner’s
Your Breeze S is a state-of-the-art life-enhancement device designed
to increase mobility. We provide you an extensive variety of products
to best fit the individual needs of the user. Please be aware that the final selection
and purchasing decision regarding the type of Breeze S scooter to be used is the
responsibility of the user who is capable of making such a decision and his/her
healthcare professional (i.e., medical doctor, physical therapist, etc.).
The contents of this manual are based on the expectation that a mobility device
expert has properly fitted the Breeze S scooter to the user and has assisted the
prescribing healthcare professional and/or the authorized Provider in the instruction
process for the use of the product.
There are certain situations, including some medical conditions, where the user will
need to practice operating the Breeze S scooter in the presence of a trained
attendant. A trained attendant can be defined as a family member or care
professional specially trained in assisting a user in various daily living activities.
As you begin using your Breeze S scooter during daily activities, you will probably
encounter situations in which you will need some practice. Simply take your time and
you will soon be in full and confident control as you maneuver through doorways, on
and off elevators, up and down ramps, and over moderate terrain.
Below are some precautions, tips, and other safety considerations that will help the
you become accustomed to operating the Breeze S scooter safely.
We have designed and engineered your Breeze S Scooter to provide
maximum mobility and utility. However, under no circumstances
should you modify, add, remove, or disable any feature, part, or
function of your Breeze S Scooter.
WARNING! Do not modify your Breeze S Scooter in any way not
authorized by the manufacturer. Do not use accessories if they have
not been tested or approved by the manufacturer.
WARNING! Do not attempt to lift or move your Breeze S Scooter by
any of its removable parts , including the armrests, seat, or shroud.
Get to know the feel of your Breeze S Scooter and its capabilities. We recommends
that you perform a safety check before each use to make sure your Breeze S
Scooter operates smoothly and safely.
Perform the following inspections prior to using your scooter:
 Check for proper tire inflation. Maintain but do not exceed the
psi/bar/kPa air pressure rating indicated on each tire if equipped with
pneumatic tires.
 Check all electrical connections. Make sure they are tight and not
 Check all harness connections. Make sure they are secured properly.
 Check the brakes.
 Check battery charge.
 If you discover a problem, contact your authorized Breeze S Provider for
Your Breeze S scooter is equipped with pneumatic tires, you should
check or have the air pressure checked at least once a week. Proper
inflation pressures will prolong the life of your tires and help ensure the
smooth operation of your Breeze S scooter.
WARNING! It is critically important that the psi/bar/kPa air pressure
indicated on each tire be maintained in pneumatic tires at all times. Do not
underinflate or overinflate your tires. Low pressure may result in loss of control, and
overinflated tires may burst. Failure to maintain the psi/bar/kPa air pressure rating
indicated on pneumatic tires at all times may result in tire and/or wheel failure.
WARNING! Inflate your scooter tires from a regulated air source with an available
pressure gauge. Inflating your tires from an unregulated air source could overinflate
them, resulting in a burst tire.
NOTE: If the tires on your Breeze S scooter marked with psi rating only, use the
following conversion formulas to find the bar or kPa rating:
bar = psi x 0.06895, kPa = psi x 6.89476.
Your scooter is rated for a maximum weight capacity. Refer to the
specifications table for information. See appendix A.
MANDATORY! Stay within the specified weight capacity for your
Breeze S scooter. Exceeding the weight capacity voids your warranty.
We will not be held responsible for injuries and / or property damage
resulting from failure to observe weight limitations.
WARNING! Do not carry passengers on your scooter. Carrying passengers on your
Breeze S scooter may affect instable conditions.
More and more buildings have ramps with specified degrees of
inclination, designed for easy and safe access. Some ramps may
have turning switchbacks (180-degree turns) that require you to have
good cornering skills on your Breeze S scooter.
 Proceed with extreme caution as you approach the downgrade of a
ramp or incline.
 Take wide swings with your Breeze S scooter around any tight corners. If you do
that, the scooter’s rear wheels will follow a wide arc, do not cut the corner short, and
do not bump into or get hung up on any railing corners.
 When driving down a ramp, keep the Breeze S scooter’s speed adjustment set to
the slowest speed setting to ensure a safely controlled descent.
 Avoid sudden stops and starts.
IFigure A. Maximum Recommended Incline Angle
When climbing an incline, try to keep your Breeze S scooter moving. If you must
stop, start up again slowly, and then accelerate cautiously. When driving down an
incline, do so by setting the speed adjustment dial to the slowest setting and driving
in the forward direction only. If your Breeze S scooter starts to move down the
incline faster than you anticipated or desired, allow it to come to a complete stop by
releasing the throttle control lever. Then push the throttle control lever forward slightly
to ensure a safely controlled descent.
WARNING! When on any sort of an incline or decline, never place the Breeze S
Scooter in freewheel mode while seated on it or standing next to it.
WARNING! When climbing an incline, do not zigzag or drive at an angle up the face
of the incline. Drive your Breeze S Scooter straight up the incline. This greatly
reduces the possibility of a tip or a fall. Always exercise extreme caution when
negotiating an incline.
WARNING! Do not drive your Breeze S Scooter across the side of an incline or
diagonally up or down an incline; do not stop, if possible, while driving up or down an
WARNING! You should not travel up or down a potentially
hazardous incline (i.e., areas covered with snow, ice, cut
grass, or wet leaves).
Even though your Breeze S Scooter is capable of climbing
slopes greater than those illustrated in figure A , do not,
under any circumstances, exceed the incline guidelines or
any other specifications presented in this manual. Doing so
could cause instability in your Breeze S scooter.
Handicap public access ramps are not subject to government regulation in all
countries, and therefore do not necessarily share the same standard percent of
slope. Other inclines may be natural or, if man-made, are not designed specifically for
Breeze S Scooters. Figure A illustrates your Breeze S Scooter’s stability and its
ability to climb grades under various weight loads and under controlled testing
These tests were conducted with the Breeze S Scooter’s seat in the highest position
and adjusted rearward on the seat base to its farthest rearward position. Use this
information as a guideline. Your Breeze S Scooter’s ability to travel up inclines is
affected by your weight, your Breeze S Scooter’s speed, your angle of approach to
the incline, and your Breeze S scooter setup.
WARNING! Any attempt to climb or descend a slope steeper than what is shown in
Figure-A may put your Breeze S scooter in an unstable position and cause it to tip.
WARNING! Never carry an oxygen tank weighing more than 15 lbs (6.8 kg). Never fill
the front or rear basket with contents exceeding 5 Kg (11 lbs) in the front and
8 Kg
(17.6lbs) in the rear basket.
Figure B. Normal Driving Position
Figure C. Increased Stability Drive
When you approach an incline, it is best to lean forward. See Figures B and C. This
shifts the center of gravity of you and your Breeze S Scooter toward the front of the
Breeze S scooter for improved stability.
NOTE: When negotiating ramps, if the throttle control lever is released while
moving forward, the powered Breeze S Scooter may "rollback" approximately 1
foot (30.5 cm) before the brake engages. If the throttle control lever is released
while moving in reverse, the powered Breeze S scooter may "rollback"
approximately 3 feet (one meter) before the brake engages.
Excessively high cornering speeds can create the possibility of tipping. Factors which
affect the possibility of tipping include, but are not limited to, cornering speed,
steering angle (how sharply you are turning), uneven road surfaces, inclined road
surfaces, riding from an area of low traction to an area of high traction (such as
passing from a grassy area to a paved area – especially at high speed while turning),
and abrupt directional changes. High cornering speeds are not recommended. If you
feel that you may tip over in a corner, reduce your speed and steering angle (i.e.,
lessen the sharpness of the turn) to prevent your Breeze S scooter from tipping.
WARNING! When cornering sharply, reduce your speed and maintain a stable center
of gravity. When using your Breeze S scooter at higher speeds, do not corner
sharply. This greatly reduces the possibility of a tip or fall. Always exercise your
senses when cornering.
Your Breeze S scooter is equipped with these powerful brake systems:
 Regenerative: Uses electricity to rapidly slow the vehicle when the throttle control
lever returns to the centre/stop position.
 Disc Park Brake: Activates mechanically after regenerative braking slows the
vehicle to near stop, or when power is removed from the system for any reason.
 Your Breeze S scooter is designed to provide optimum stability under normal
driving conditions- dry, level surfaces composed of concrete, blacktop, or asphalt.
However, We recognizes that there will be times when you will encounter other
surface types. For this reason, your Breeze S Scooter is designed to perform
admirably on packed soil, grass, and gravel. Feel free to use your Breeze S Scooter
safely on lawns and in park areas.
 Reduce your Breeze S Scooter’s speed when driving on uneven terrain and/or soft
 Avoid tall grass that can become tangled in the running gear.
 Avoid loosely packed gravel and sand.
 If you feel unsure about a driving surface, avoid that surface.
WARNING! You should not operate your Breeze S scooter on public streets and
Be aware that it may be difficult for traffic to see you when you are seated on your
Breeze S Scooter. Obey all local pedestrian traffic rules. Wait until your path is clear
of traffic, and then proceed with extreme caution.
WARNING! Do not drive near raised surfaces, unprotected ledges,
and/or drop-offs (curbs, porches, stairs, etc.).
WARNING! Do not attempt to have your Breeze S Scooter climb or
descend an obstacle that is inordinately high.
WARNING! Do not attempt to have your Breeze S Scooter proceed
backward down any step, curb, or other obstacle. This may cause
Breeze S Scooter to tip.
WARNING! Be sure your Breeze S Scooter is traveling perpendicular to any curb
you may be required to ascend or descend.
WARNING! Do not attempt to negotiate a curb that has a height greater than 12 cm
Exposure of your Breeze S Scooter to inclement weather conditions should be
avoided whenever possible.
If suddenly caught up in rain, snow, severe cold or heat while operating your Breeze
S Scooter, proceed to shelter at the earliest opportunity. Thoroughly dry your Breeze
S Scooter before storing, charging, or operating your Breeze S Scooter.
PROHIBITED! Operating in rain, snow, salt, mist/spray conditions, and on icy
surfaces can have an adverse affect on the electrical system. Maintain and store your
Breeze S Scooter in a dry and clean condition.
WARNING! Prolonged exposure to hot or cold conditions may affect the temperature
of upholstered and non-upholstered items on the Breeze S Scooter, possibly
resulting in skin irritation. Exercise caution when using your Breeze S Scooter in
extremely hot or cold conditions or when exposing your Breeze S Scooter to direct
sunlight for prolonged periods of time.
Your Breeze S Scooter is equipped with a manual freewheel lever
that, when pushed Upward, allows the Breeze S scooter to be
pushed. For more information about how to place your Breeze S
scooter into and out of freewheel mode, see 3. “General description
of your Breeze S scooter.”
WARNING! When your Breeze S scooter is in freewheel mode, the
braking system is disengaged.
 Disengage the drive motors only on a level surface.
 Ensure the key is removed from the key switch.
 Stand beside the Breeze S Scooter to engage or disengage
freewheel mode. Never sit on a Breeze S Scooter to do this.
 After you have finished pushing your Breeze S Scooter, always return it to the
drive mode to lock the brakes.
 An added feature built into the Breeze S Scooter is “push-too-fast” protection
which safeguards the Breeze S scooter against gaining excessive speed while in
freewheel mode.
“Push-too-fast” operates differently depending on which of two conditions exists:
 If the key is switched “off” while in freewheel mode, the Breeze S scooter’s
controller activates regenerative braking when the Breeze S scooter is pushed faster
than a maximum threshold which has been preprogrammed. In this case, the
controller is acting as a speed governor.
 If the key is switched “on” while in freewheel mode, you will encounter considerable
resistance at any speed. This prevents the Breeze S scooter from gaining unwanted
momentum should the manual freewheel lever inadvertently be released while driving
the Breeze S scooter.
 When using this lever be careful not to touch the internal surface of the motor, they
could be very hot and cause injure. See the warning label at the rear of the scooter
near the lever.
Breeze S scooters are not designed to travel up or down stairs or escalators.
Always use an elevator.
WARNING! Do not use your Breeze S scooter to negotiate steps or escalators.
 Determine if the door opens toward or away from you.
 Use your hand to turn the knob or push the handle or push-bar.
 Drive your Breeze S Scooter gently and slowly forward to push the door open.
Or drive your Breeze S Scooter gently and slowly rearwards to pull the door open.
Modern elevators have a door edge safety mechanism that, when pushed, reopens
the door(s).
 If you are in the doorway of an elevator when the door(s) begin to close, push on
the rubber door edge or allow the rubber door edge to contact the Breeze S scooter
and the door will reopen.
 Use care that pocketbooks, packages, or Breeze S Scooter accessories do not
become caught in elevator doors.
NOTE: Sometimes turning with your Breeze S Scooter may be difficult to maneuver
in elevators and building entrances. Use caution when attempting to turn or
maneuver your Breeze S Scooter in small spaces, and avoid areas that might pose a
If you will be traveling with your Breeze S scooter, you may find it necessary to use
a lift/elevation product to aid in transportation. We recommends that you closely
review the instructions, specifications, and safety information set forth by the
manufacturer of the lift/elevation product before using that product.
WARNING! Never sit on your Breeze S Scooter when it is being used in connection
with any type of lift/elevation product. Your Breeze S Scooter was not designed with
such use in mind and any damage or injury incurred from such use is not the
responsibility of us.
BATTERIES (see also replacing batteries page #32)
In addition to following the warnings below, be sure to comply with all
other battery handling information.
MANDATORY! Battery posts, terminals, and related accessories
contain lead and lead compounds. Wear goggles and gloves when
handling batteries and wash hands after handling.
WARNING! Scooter batteries are heavy. See specifications table. If
you are unable to lift that much weight, be sure to get help. Use proper lifting
techniques and avoid lifting beyond your capacity.
WARNING! Always protect the batteries from freezing and never charge a frozen
WARNING! Connect the battery harnesses in the proper manner. RED (+) cables
must be connected to positive (+) battery terminals/posts. BLACK (-) cables must be
connected to negative (-) battery terminals/posts. REPLACE cables immediately if
damaged. Protective caps must be installed over all battery terminals.
NOTE: If you encounter a damaged or cracked battery, immediately enclose it in a
plastic bag and contact your local waste disposal agency or authorized Breeze S
Provider for instructions on disposal and battery recycling, which is our
recommended course of action.
Do not remain seated in your Breeze S scooter while traveling in a motor vehicle.
The Breeze S scooter should be stowed in the trunk of a car or in the back of a truck
or van with the batteries removed and properly secured. In addition, all removable
Breeze S scooter parts, including the armrests, seat, and shroud should be removed
and/or properly secured during motor vehicle transport.
WARNING! Although your Breeze S scooter may be equipped with a positioning belt,
this belt is not designed to provide restraint during motor vehicle transport. Anyone
travelling in a motor vehicle should be properly secured in the motor vehicle seat with
safety belts fastened securely.
WARNING! Do not sit on your Breeze S scooter while it is in a moving vehicle.
WARNING! Always be sure your Breeze S scooter and its batteries are properly
secured when it is being transported. Batteries should be secured in an upright
position, and protective caps should be installed on the battery terminals. Batteries
should not be transported with any flammable or combustible items.
Although your Breeze S scooter may be equipped with a positioning belt, this belt is
not designed to provide proper restraint during motor vehicle transport. Anyone
traveling in a motor vehicle should be properly secured in the motor vehicle seat with
safety belts fastened securely.
WARNING! Do not sit on your Breeze S scooter while it is in a moving vehicle.
WARNING! Ensure your Breeze S scooter and its batteries are properly secured
when being transported.
WARNING! If you anticipate being seated in a stationary position for an extended
period of time, turn off the power. This will prevent unexpected motion from
inadvertent throttle control lever contact.
Getting onto and off of your Breeze S scooter requires a good sense
of balance. Please observe the following safety tips when getting onto
and off of your Breeze S scooter:
 Remove the key from the key switch.
 Ensure that your Breeze S scooter is not in freewheel mode.
See 3- “General description of the Breeze S scooter.”
 Ensure that the seat is secured into place.
 Pivot the armrests up to make getting onto and off of the Breeze S scooter easier.
WARNING! Position yourself as far back as possible in the Breeze S scooter seat to
prevent the Breeze S scooter from tipping and causing injury.
WARNING! Avoid putting all of your weight on the Breeze S scooter armrests and do
not use the armrests for weight bearing purposes, such as transfers. Such use may
cause the Breeze S scooter to tip, resulting in a fall from the Breeze S scooter and/or
personal injury.
WARNING! Avoid putting all of your weight on the floorboard. Such use may cause
the Breeze S scooter to tip.
Avoid reaching or bending while driving your Breeze S Scooter. Bending forward
creates the risk of accidental throttle control lever contact. Bending to the side while
seated creates the risk of tipping. It is important to maintain a stable centre of gravity
and keep the Breeze S Scooter from tipping. We recommend that the Breeze S
scooter user determine his/her personal limitations and practice bending and
reaching in the presence of a qualified attendant.
WARNING! Do not bend, lean, or reach for objects if you have to pick them up from
the Breeze S Scooter deck or from either side of the Breeze S scooter. Movements
such as these may change your center of gravity and the weight distribution of the
Breeze S scooter and cause your Breeze S scooter to tip.
PROHIBITED! Keep your hands away from the tires and wheels when driving. Be
aware that loose fitting clothing can become caught in drive tires and wheels.
The Breeze S scooter user must exercise care and common sense when operating
his/her Breeze S scooter. This includes awareness of safety issues when taking
prescribed or over-the-counter drugs or when the user has specific physical
WARNING! Consult your physician if you are taking prescribed or over-the-counter
medication or if you have certain physical limitations. Some medications and
limitations may impair your ability to operate your Breeze S scooter in a safe manner.
The Breeze S scooter user must exercise care and
common sense when operating his/her Breeze S
scooter. This includes awareness of safety issues
while under the influence of alcohol, or while
WARNING! Do not operate your Breeze S Scooter
while you are under the influence of
Alcohol, as this may impair your ability to operate the Breeze S scooter in a safe
WARNING! The manufacturer strongly recommends that you do not smoke
cigarettes while seated on your Breeze S scooter, although the Breeze S scooter
seat has passed the necessary testing requirements for cigarette smoking. You must
adhere to the following safety guidelines if you decide to smoke cigarettes while
seated on your Breeze S scooter.
 Do not leave lit cigarettes unattended.
 Keep ashtrays a safe distance from the seat cushions.
 Always make sure cigarettes are completely extinguished before disposal.
WARNING! Laboratory tests have shown that electromagnetic and
radio frequency waves can have an adverse affect on the
performance of electrically-powered mobility vehicles.
Electromagnetic and Radio Frequency Interference can come from
sources such as cellular phones, mobile two-way radios (such as
walkie-talkies), radio stations, TV stations, amateur radio (HAM)
transmitters, wireless computer links, microwave signals, paging transmitters and
medium-range mobile transceivers used by emergency vehicles. In some cases,
these waves can cause unintended movement or damage to the control system.
Every electrically-powered mobility vehicle has an immunity (or resistance) to EMI.
The higher the immunity level, the greater the protection against EMI. This product
has been tested and has passed at an immunity level of 20 V/M.
WARNING! Be aware that cell phones, two-way radios, laptops, and other types of
radio transmitters may cause unintended movement of your electrically-powered
mobility vehicle due to EMI. Exercise caution when using any of these items while
operating your mobility vehicle and avoid coming into close proximity of radio and TV
WARNING! The addition of accessories or components to the electrically-powered
mobility vehicle can increase the susceptibility of the vehicle to EMI. Do not modify
your Breeze S scooter in any way not authorized by the manufacturer.
WARNING! The electrically-powered mobility vehicle itself can disturb the
performance of other electrical devices located nearby, such as alarm systems.
NOTE: For further information on EMI/RFI,ask your authorized supplier.
Figure 1
Figure 2
Figure 3
Note: The numbers in parentheses refer to the parts illustrated on Figure 1+2+3.
Keys/Cellphone pockets (4.5)
Machine plate with Serial
number (4.6)
Tiller (1 ) /
Handlebars (1.7)
Mirror (1.4)
Operating Speed lever (1.8)
Brake Lever (1.16)
Charging Socket (1.12)
Handlebars Adjusting Lever
Buzzer (1.18)
Front Basket (4.1)
Headlight (4.2) and Front
Blinkers (4.3)
Front Bumper (4.4)
Battery Cover (2)
Fuses (2.1a, 2.1b)
Manual Release of
electromagnetic brake (2.2)
Right & Left
Serial Number and Manufacturer’s data are fixed on the mud guard in
front of your foot.
Your Breeze S is designed for both hand operation, But it is delivered
to you with right-hand controls.
(Left-hands controls can be setup by your dealer).
Every Breeze S is supplied with 1 or 2 mirrors.
Use to control the Breeze S speed.
Use to brake in emergency conditions or when needed.
The socket is used to connect the charger plug for batteries charging.
Right hand side of the Handlebar.
The Handlebar of the Breeze S is adjustable Forward and Reverse by
releasing the Adjusting Lever.
Use to alarm the people around when needed.
For carrying parcels and personal effects. Maximum load 8 kg (17.6
(a) Road light for dark hours
(b) Blink light for turnings signals
Protect the power unit, electronics and batteries.
1.2a - Main fuses 70A – Semi Automatic
1.2b - Charge fuse 15A –Semi Automatic
Located between the rear wheel and the battery cover.
The lever is at the rear area of the Breeze S. Manual release lever
allow you to push or pull the Breeze S manually.
Push / Pull the lever as shown in the label:
= Release (Push),
= Engaged (Drive).
When the lever is in released position the Breeze S can not be
operated / drive.
Note: Never release the lever when the Breeze S is on slope.
Rear Bumper (2.3)
Rear Pilot & Brake lights (2.4)
Rear Blinkers (2.5)
Seat (7)
Seat Back Rest (7.1)
Seat Head Rest (7.2)
Arm Rest (7.3)
Seat Forward / Reverse
Lever (7.4)
Seat Rotation Lever (7.5)
Seat Height adjust
Rear Box (6)
Floor (4)
The Breeze S seat is equipped with folding armrests (7.3) to allow
convenient access to the Seat. The Seat itself can be rotated to allow
easy access.
Use for comfort entrance, Folded.
The Lever is used to change the seat position Forward and Reverse,
to fit the driver mostly.
The Lever is used to swivel the Seat 45 and 90 degrees in either
direction, to ease the driver's access to the Seat.
The Seat Height can be adjusted Up / Down to fit the user height.
This adjustment can be made by a technician.
For adjusting the seat height , you need to remove the seat and the
batteries cover , then remove the screw that secure the seat pin and
to reassemble it at another hole as desired, than re-secure the screw.
For carrying parcels and personal effects. Max. load 10 kg (22 lbs).
Carpet covered. Possible to remove for cleaning.
(Reference numbers refer to the figures #4 and #5)
Adjusting the
Adjust the Angle of tiller as follows:
Tiller angle (1.7)
 Release the Handlebars Adjusting Lever (1.10),
by pushing the lever down.
 Release the lever at the desired place.
Adjusting of the
Tiller height can be adjusted by technician about 40mm.
Tiller Height
Seating into the
Breeze S
Before driving the Breeze S make sure that the
Charging Plug is disconnected from the Charging
Socket (1.12).
Note: While the Charging Plug is inserted in the
Charging Socket, the Breeze S cannot be operated.
Use the Lever (7.5) to rotate the Seat to the side for
easy access. Raise the Armrest (7.3) to give you easy
access to the Seat.
Adjust the seat Forward Reverse using the Lever(7.4)
Handlebars and
Hand protectors
Adjust the shock
absorbers to the
When driving always keep your hands on the
handlebars (1.7) and within the hand protectors (1.6).
I t is possible to adjust the rear shock absorber to the
required load or way of using the Breeze. If needed,
ask a technician to adjust the absorbers for your
Figure 4
Figure 5
Figure 6
(Numbers in the table refers to figure no.6 and figure no.7)
Key Switch (1.11)
Automatic Shut Off
Adjusting the
Hand Brake
Speed Operating
Lever and Manual
Hand Brake
The Breeze S has a Main Key Switch (1.11) - located at the top of the
Tiller Box (1).
The Main Key Switch has two positions:
 “OFF” - The Breeze S cannot be driven and the Electromagnetic
Brake is locked.
 “ON” - Power is supplied to the Breeze S. The Electromagnetic
Brake releases automatically when the Operating Speed lever is
To operate the Breeze S, insert the key into the Main Key Switch and
turn it to “ON” (clockwise). The switch will remain in this position and
the LCD (1.1) will be lit.
Note : Key Switch is used for operating the Breeze S , but not for locking .
When Key Switch is at “ON” position, after a few minutes (usually 20
minutes) without using the Operating Lever, the control system will be shut
off automatically to save battery energy.
In such cases, to restart control system, turn Main Key Switch “OFF” and
“ON” again.
The hand brake cable mechanism can be adjusted by an authorized
The Hand Brake is part of your safety system.
DO NOT adjust the Hand Brake by yourself-get professional assistance!
To start driving, squeeze the operating Speed Lever (1.8) gently until you
reach the desired speed. The speed is directly proportional to the
deflection of this Lever.
To stop-release the operating Speed Lever (1.16) , The Breeze S will stop
gradually , automatically.
Note: Additionally, emergency braking is possible using the Manual
Hand Brake (1.16).
Before turning, push the “Turn Signal Switch” (1.14), on the Handlebar to
the desired direction - left for left, right for right.
To stop the signal lights just push again on the same button.
While blinkers signals are activated, the Right (5.3) / Left (5.4) signs will
operate respectively.
A warning buzzer may also be sounds (in certain models only and subject
to local ordinances).
Push one of the 2 Buttons (1.9) to activate the buzzer.
The buzzer sounds automatically under the following conditions (subject to
change where prohibited by law):
1. When reversing.
2. When operating the “Turn Signal” (Right or Left).
Remark: It is possible to change the Buzzer Functioning by changing a Dip
Switch in the front Board .This needs to be made by a trained technician.
Headlight Switch
Turn on the Headlight and rear lights by pushing the Light button (1.15).
This button activates both the Headlight and the Rear Lights.
When Lights are activated the Light Led (5.6) is lit.
To turn off the lights , push the button again.
Hazard Warning
The Hazard Button (1.17) operates all flashing lights on the Breeze S.
Pushing the button once turns the all the lights ON blinking.
A second push turns them OFF.
When Hazard is activated both signals (5.3+5.4) are Flashing.
When the Vehicle is being charged it is inhibited. In this condition no
driving can be done. When being charged ON condition the signal (5.13)
will lit.
When driving on Ramp , Steep Curbs and turns drive the Breeze S very
slowly and carefully , even consider changing the Half Speed Switch (1.2)
to Half speed mode.
When going up or down a step always drive the Breeze S so that the
wheels will get in perpendicular direction to the step and the rear wheels
wheel climb or go down together.
Never try to go on an obstacle that is more than the maximum
recommended slope angle and curb climbing. Maximum rates are in the
specification sheet.
Always drive carefully, adjust the speed according the limitation of
the road.
Before making sharp turns , reduce the Breeze S speed to Half Speed
to prevent side roll-over.
After stopping, turn the Main Key Switch (1.11) to OFF and remove the
key. The LCD will turn OFF. The Electromagnetic Brake is engaged
Note: The Electromagnetic Brake is automatically locked whenever
the Operating Lever is released and after the Breeze stops
Charge Inhibit
Safe driving
Figure 7
(Numbers in the table refers to figure 6 & figure no. 7)
LCD Display
When driving and operating the Breeze, all the needed information is
displayed on the LCD screen (1.1).
See details below.
Battery Status
The Battery Capacity Indicator (5.5) in the LCD screen, shows you the
remaining capacity of the batteries. Like in cars the Batteries indicator is not
absolute accurate, but will help you from running out of fuel. The best way to
use the battery indicator is to learn it's behavior to the change of the battery
capacity. When the indicator points 2-3 bars, recharge batteries as soon as
When the indicator left only last blink Bar , you should get to immediate
charging, it is possible to drive only a short distance (3-4 km on level
surface).The accuracy of the battery indicator reading depends also on the
type and age of the batteries.
The Breeze S is equipped with Fault indication.
The fault indication appears as a flashing code of the battery indicator and
as well as an Error Code at the LCD screen (5.5 & 5.12).
For further details see Breeze maintenance manual.
Fault Indicator
Light indicator
When the main lights are ON (front and rear) a sign will be lit (5.6).
When the blinkers are ON, signs will be lit (5.3 and / or 5.4).
Half speed
When the Half Speed switch (1.2) is at Half Speed position, a sign of "1/2" is
lit (5.11).
When there is one of the follows conditions: Motor Overheated, Panic Brake
was operated or Manual release brake is in OPEN position or electric EMB
is opened, the Alarm indicator will be lit (5.13).
The LCD screen digital area will show the speed of the scooter. (5.12). The
speed is shown in units of kph or mph. Set up of the speed units can be
done by technician.
The MODE / RESET button (5.20) will change the digital reading from Speed
to Travel Distance or Time. The distance is showed in units of Km OR Miles
and the time is showed in Hours.
(Note: Set up of the Distance units can be done by technician.)
When you push the MODE bottom to the modes: "travel time" and "travel
distance" and keep pushing it more than 7 seconds , the "travel time" and
"travel distance" will reset to Zero.
The Set Up button 5.21 is used to setup the Clock.
Speed Display
MODE and
RESET button
Set Up button
Clock Set Up
When changing to clock mode with MODE bottom , keep pushing for 7
seconds and you will get into the Set Up mode of the clock.
Clock Adjust:
Use combine Left SETUP bottom and Right MODE bottom as follows:
Every push on Mode change different time unit and this unit is Flashing.
When Flashing , every push on Setup increase 1 unit.
or MM.DD
or MM.DD
Save of Updated Time and
Climbing an
Driving on slopes
and Turns
To climb an Obstacle drive the Breeze S forward, toward the
Obstacle. Drive until that the front wheel is touching the
obstacle and than squeeze the lever speed, keeping the
Before making sharp
turns, and especially on
slopes, reduce the
Breeze S speed to
minimum to prevent
side roll-over.
The Breeze S is able to
go up slope higher than
the recommended safe
slope. Do not drive on
slopes you are not sure
about their angle.
However drive very
slowly and prevent side
angles more than 26%
Now after learning through all the operating instructions,
before starting to use the Breeze S, do a visual check
through the all the parts of the vehicle, to make sure that no
external damage has been occur to the vehicle while
transportation. In any case you are not sure call your dealer
and ask for an explanation.
Several parameters of the Breeze S Controller can be
programmed with a special Programmer.
Programming should be done by trained authorized
technician only. Wrong programming can cause abnormal
operation of the Breeze S ,Harm persons and Injury.
It is very much recommended that when receiving as new or
from another user or after a period of not using the Breeze S
a performance check will be made as follows:
1. Switch on the main switch.
2. See that on the display panel – the battery indicator is lit
and the Ready/ON led is lit as well.
3. Squeeze the speed Wig Wag lever slowly and make sure
that the Breeze S is traveling with correspondence to the
squeezing on the lever.
4. Release the Speed lever and make sure that the Breeze
Safety Belt
Attaching the
Breeze S in
motor vehicle for
S is stopping softly and that you hear a click coming from
the EMB engaging.
5. Make a check of all the buttons functions on the
6. Switch off the main key switch. Your Breeze S is now
ready to drive.
The user should know his weight and all other loads are
lower than the maximum of 160 Kg (352 lbs) / 200 Kg (440
lbs) depend on the model. If not sure it should be measured.
Use a safety belt when ever it is needed or under local
To transport the Breeze S in a motor vehicle , the Breeze
has to be secured while traveling .
The Foot rest of the Breeze S should be tie down (6) to the
motor vehicle floor with a suitable restrain belts and tight
The Rear part of the Breeze S should be tie down (7) as at
the 2 Yellow Marks at the rear part of the Breeze-in the lower
part of the power unit .
The tie/restrain system should be with similar components
and securing ,like the ones used in standard cars fasten belt.
Warning : When transporting the Breeze S , never use it
for any one to be seated on the scooter.
Figure 8
To reduce the height of the Breeze S while transporting it,
The seat can be removed as explained in chapter 3:
maintenance. And as well the Tiller can be folded to
horizontal position.
Read Charger’s manual before using the charger.
Warning: If you use a different charger, ask your dealer for
1. Insert first the Charging Plug (8) to the Charging Socket (9) located at the
right side of the tiller box.
2. Plug the power cord (10) of the charger into a wall outlet (11).
3. When charging is completed and you are ready to go - unplug the charger
cord (10) from the wall outlet (11) and then remove the charger plug (8) from
the Breeze S charging socket (9).
4. In ideal storage conditions, batteries which were charged to full capacity
and are not used should be recharged every 6 months.
5. If you are planning not to use your Breeze S for an extended period of
time, we recommend charging it for two days and then disconnecting the
6. If you have not used your Breeze S for an extended period of time,
charge the batteries for at least 24 hours before driving.
 Note: There is NO need to disconnect the Charging Plug promptly
after the charging is complete.
 However, DO NOT leave the Charger connected to the batteries
 As long as the Charging Plug is in the Charger Socket, the
electronic control of the Breeze automatically cuts all power to the
electric system and the Breeze Sannot be driven.
 The charger supplied is suitable for charging Lead Acid Dry/Gel
batteries .Only the defind type of charger should be used. Using
any other type of charger should be approved by your Dealer /
Figure 10
1. Maintenance Manual is available for trained technicians.
2. The numbers in parentheses refer to the parts illustrated
in figure 11.
Although the Breeze S requires minimal maintenance, do not neglect it.
When servicing the Breeze S, make sure that it stands on a level surface
and that the key is not inserted.
Remark: For the periodic maintenance no special tooling is needed.
(Numbers in the table refers to figure 9)
Type of Service
Check air
pressure in all
Check emergency
Check normal
drive and stop
Check tires wear
Check for missing
parts and
damaged parts
.Use the figures
#1,2,3,4 .
Check secure of
all screws and
Every week
Every week
Every Month
Every Month
When receiving the Breeze
S or after a long time not
using it.
Once a year by technician.
Every 2-3 years , after about
300-400 full cycles of
charge/discharge. When short
travel distance and/or
technician check.
Note: To Replace the batteries, the Seat and Battery
Cover located under the Seat must be removed.
External – when needed.
Internal – Once a year by
Removing the
Seat and the
Replacing the
Turn the Seat by using the lifting Lever (7.5) so that the
Lever will point 45º Right or Left. The Seat can be
removed only at this position.
Remove the Seat (7): Hold the Seat in your two hands –
one hand on the backrest and a second hand at the front
lower part of the seat and lift the seat up from its pivot.
Warning! The seat weight is ~15 Kg (33lbs).
Keep lifting with your Knees/legs and not loading your
Back. Release Battery Cover (2) securing screws (2.6).
Lift the Battery Cover (2) until it is released from the Seat
Pivot .
The replacement of the Batteries Cover is done in
reverse order; MAKE SURE that the Gray Cover (2) fits
onto it’s place. Secure with the 4 screws (2.6).
Batteries weight each ~23 Kg (~50 lbs) and over.
Lift each battery only with the appropriate handle. Keep
lifting with your Knees/legs and not loading your Back.
Correct air pressure in the tires is essential for optimal
steering and stability of the Breeze S. Check air pressure
every two weeks.
Inflate to the proper air pressure: 25 ±2 psi. Breeze 4W
front tires: 20±2 psi. Golf wheels tires : 20±2 psi.
Use only a damp cloth and mild detergent. Never use a
hose for cleaning. This may severely damage the power
and electronic components.
Figure 11
Remove batteries terminal insulating cap. Each time remove
only one cap. Unsecure the screw of the wiring terminal from
battery terminal using 10/13 mm key. Make sure your 10/13
mm key is not touching any other terminal or metal part. This
can cause damage and Injure.
After un securing all wires terminals, remove the batteries and
install the new ones. Connect the wires as shown in below
Figure 12. The connection Label is also located near the
Secure all wires to the frame with Ties as shown in Figure 12.
Secure all terminals with screws and make sure insulating caps
are correctly placed on terminals.
Warning! Batteries contain high energy. Misconnection, short
circuits can burst with strong sparks causing heat and possible
Warning! Working with batteries can cause damage and Injure
if not done properly.
Note! Replacing batteries should be done only by trained and
or professional person.
Figure 12
The following table provides troubleshooting and repair instructions for
symptoms encountered when operating the Breeze S. It presents the best
ways to handle the faults. The table contains three columns:
The Symptom - describes the functional problem that results from the fault.
Probable Cause - lists all probable causes for the relevant symptom. The
probable causes are listed logically by order of probability: the first one is the
most probable.
Remedy - lists the action to be taken to solve the problem. The appropriate
remedy appears opposite each probable cause. These remedies should
solve the problem; if not, continue down the list to the next cause/remedy.
Remember: you may contact your dealer at any time for further professional
Probable Causes
 Puncture.
 Pump to normal
 Repair the tire.
The Display Flashes
and the vehicle does not
Manual Mechanical
Brake Lever is fully
pressed but the vehicle
does not stop.
 Controller
Coded Fault.
 Ask for technical
 Loose hand
brake mechanism.
 Brake cable
needs to be tight.
Only by authorized
When releasing the
speed lever on level
surface , the Breeze S
does not stop at regular
distance or more than 3
The Key Switch is
(clockwise), but the
“ON” light does not
come on.
 Not adjusted or
faulty controller.
 Ask for technical
 Main fuse 70A
popped out or
electrical fault.
(See 2.1a in Figure1)
 Reset fuse
Note:Do not reset
fuse more than twice.
If the symptom recurs
after resetting the
second time, call the
authorized dealer for
Flat tire and unstable
 Low air pressure.
Breeze S does not
move when
squeezing the
Operating Lever .
Intermittent drive.
Probable Causes
 Main Key Switch
is in OFF position.
 Charging Plug
is installed in
Charging Socket.
 The Mechanical
Release Lever of the
Brake is operated .
 Other inhibit :
Panic brake.
 Control system
 Turn the key to
“ON” position.
 Disconnect the
Charging Plug from the
Breeze S.
 Remove lever to
engaged position .
 Battery capacity
 Failed
 Charge batteries for
at least 18 hours.
 Remove Batteries
Cover and check the
battery cables
connection. In case of
corrosion of the
terminals, clean the
terminals with a damp
clean cloth.
 If, after recharge,
the red leds are still ON,
the battery may be
faulty. For replacement,
contact your dealer.
 Faulty battery.
Main or rear lights or
Blinkers light are
When driving uphill or
carrying heavy loads
the Breeze S speed is
decreased gradually
but still moving.
 Faulty LED light
board or Electronics
 The
Breeze S controller
exceeded too high
 Reset by switch
OFF and ON again.
 Call for technical
 Call technician for
 It is recommended
to stop the Breeze S
and let the controller
cool for awhile.
All types of electrically powered vehicles, such as powered
wheelchairs and motorized scooters (in this text all types will be
referred to as “powered vehicles”) may be susceptible to
electromagnetic interference (EMI). This is from sources such as radio
and TV stations, amateur radio (HAM) transmitters, two-way radios and cellular
phones. The interference (from radio wave sources) can cause the powered vehicle
to release its brakes, move by itself, or move in unintended direction. It can also
damage the powered vehicle’s control system. The intensity of the interfering EM
energy can be measured in volts per meter (V/m). Each powered vehicle can resist
EMI interfering electromagnetic energy (EM) emitted up to a certain intensity. This is
called its “immunity level”. The higher the immunity level, the greater the protection.
At this time, current technology is capable of achieving immunity level, which would
provide useful protection from the more common sources of radiated EMI. This
vehicle as shipped, with no further modification, has an immunity level of 20 V/m.
There are a number of sources of relatively intense electromagnetic fields in
everyday environment. Some of these sources are obvious and easy to avoid. Others
are not apparent and exposure is unavoidable. However, we believe that by
following the warning listed below, your risk of EMI will be minimized.
The sources of radiated EMI can be broadly classified into three types:
Hand-held portable transceivers (transmitters-receivers) with the antenna
mounted directly on the transmitting unit. Examples include: citizen band (CB) radios,
“walkie talkies”, security, fire and police transceivers, cellular telephones and other
personal communication devices. ** NOTE: some cellular telephones and similar
devices transmit signals while they are ON, even when not being used.
Medium-range mobile transceivers Such as those used in police cars, fire trucks,
ambulances and taxis. These usually have the antenna mounted on the outside of
the vehicle .
Long-range transmitters and transceivers such as commercial broadcast
transmitters (Radio and TV broadcast antenna towers) and amateur (HAM) radios.
NOTE: Other types of hand held devices, such as cordless phones, laptop
computers, AM/FM radios, TV sets, CD players, cassette players and small
appliances such as electric shavers and hair dryers, as far as we know, are not likely
to cause EMI problems to your powered vehicle.
Powered Vehicle Electromagnetic Interference
Because EM energy rapidly becomes more intense as one moves
closer to the transmitting antenna, the EM field from hand-held radio
wave sources (transceivers) are of special concern. It is possible to
unintentionally bring high levels of EM energy close to the powered
vehicle’s control system while using these devices. This can affect powered vehicle
movement and braking.
Therefore, the warnings listed below are recommended to prevent possible
interference with the control system of the powered vehicle.
Electromagnetic interference (EMI) from sources such as radio and TV stations,
amateur radio (HAM) transmitters, two-way radios and cellular phones can affect
powered vehicles.
Following the warnings listed below should reduce the chance of unintended brake
release or powered vehicle movement which could result in serious injury:
Do not operate hand-held transceivers (transmitters-receivers) such as citizen
band (CB) radios, or turn ON personal communication devices such as cellular
phones, while the powered vehicle is ON;
Be aware of nearby transmitters, such as radio or TV stations and try to avoid
coming close to them.
On appearance of unintended movements or brake release occurrences, switch
the powered vehicle OFF as soon as it is safe.
4) Be aware that adding accessories or components, or modifying the powered
vehicle, may make it more susceptible to EMI (Note: there is no easy way to
evaluate their effect on the overall immunity level of the powered vehicle).
5) Please report to us all incidents of unintended movement or brake release and
note whether there is a source of EMI
Important information
1) 20 volts per meter (V/m) is a generally achievable and useful immunity level
against EMI (as of May 1994). The higher the level the greater the protection;
2) This product delivered to you, has an immunity level of 20 V/m.
Manufacturer: Kibbutz Afikim 14148, Israel
Maximum occupant mass: 200 kg (For the tests a 150kg dummy according ISO
7176-11 was used, added by 50 kg masses distributed approximately proportional to
the dummy weight distribution)
Disclosure information (ISO 7176-15)
Overall length with
legrest (A)
Overall width (B)
Folded length(D)
Folded height(C)
Total mass (G)
Mass of the heaviest
part (H)
Static stability
Static stability uphill
Static stability
sideways (X)
Energy consumption
155 kg
23 kg
Dynamic stability
Obstacle climbing
80 mm
120 mm
Maximum speed
Minimum braking
distance from max
15.0 km/h
Tires Pneumatic
Pressure of front tires:
Pressure of rear tires:
Batteries type
680 mm mm
3000 m mm
Front Tir 4.10/3.50-6"
Rear Tire
1.7 bars
1.7 bars
Lead Acid Gel/dry, 2x12 V 70 Ah, Max.
Charge current 12Amp.max.
Dims. 265mm x 175mm x 230mm
Seat plane angle
Effective seat depth
Effective seat width (N)
Seat surface height at
front edge
Backrest angle (P)
Backrest height (Q)
?? mm
Footrest to seat
distance (I)
Leg to seat surface
Armrest to seat
distance (K)
Front location of
armrest structure
Handrim diameter (S)
460 mm
90 
390 mm
25 mm
Horizontal location of
Minimum turning radius
Minimum turn-around
Charger for charging
Dry/Gel Acid Battery
24VDC max
charge 15 Amp.
Left speed lever.
Pedal operation
Twist speed lever
Winter light sides close
Rear attach bracket.
Wide seat 22"
Seat lift column-electric
Remarks :
* All technical specifications are subject to change without prior notice.
** The maximum speed at every country is limited according local restrictions.
April 2010
Revision 01
Products: Breeze S , 4 Wheels and 3 Wheels
P/N of the user manual: PRS4001
File : I:\RD\Breeze S\User Manual\Breeze S-User-Manual-English -rev0.doc
Kibbutz Afikim
Jordan Valley
Tel: 972-4 6754814
Fax: 972-4 6751456
Email: mainbox@af
P/N PRS4001
Distributed by: