Siemens SIMATIC RF 300 RF 310-R, RF 340-T, RF 320-T RFID system, 8xIQ-Sense communication module System Manual

SIMATIC RF 300 RF 310-R, SIMATIC RF 300 RF 340-T, SIMATIC RF 300 RF 320-T, 8xIQ-Sense are part of the SIMATIC RF 300 system. This system is a contactless identification system specifically designed for use in industrial production for the control and optimization of material flow. Its compact components are particularly suited to small assembly lines and conveyor systems with restricted space for installation. The system is designed to reliably, quickly and economically identify containers, pallets, and workpiece carriers in a closed production loop. This means the data carriers (transponders) remain within the production chain and are not shipped out with the products.

PDF Download
Document
Siemens SIMATIC RF 300 System Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Contactless identification
  • Compact components
  • Reliable and efficient
  • Suitable for small assembly lines
  • High noise immunity
  • Extensive diagnostic options
  • Integration into PLC/automation systems

Frequently asked questions

SIMATIC RF 300 is primarily used for contactless identification of containers, pallets and workpiece carriers in a closed production loop. It is particularly suitable for assembly and handling systems, assembly lines, production logistics, parts identification, and conveyor systems.

The maximum read/write distance for SIMATIC RF 300 depends on the reader and transponder used. However, the system limit is up to 250 mm.

The operating temperature range for SIMATIC RF 300 readers is -25°C to +70°C. The operating temperature range for SIMATIC RF 300 transponders is -40°C to +85°C and up to +220°C cyclic.

SIMATIC RF 300 can be integrated into SIMATIC S7-300, Profibus DP V1, PC, and third-party PLCs through communication modules.
Preparing document for printing…
0%