DKS | 6400 | Section A1 2015_Apr

April 2015
Vehicular Gate Operators
Section A1
Vehicular Gate Operators - Reference Guide
For current pricing, please use our Dealer Portal. http://doorking.com/dealer-distributor
Date
Page
4-1-15
All
Comment
April, 2015 reference guide update.
Specifications subject to change without notice.
Section A1, Page 1
Vehicular Gate Operators
April, 2015
Solar Tax Credit
Homeowners who purchase a solar powered gate operator manufactured by DoorKing, Inc. after December 31, 2008,
may qualify for a 30% Federal Tax Credit off the installed cost of the system. This tax credit is available for the installed
cost of the solar powered gate operator on the homeowner’s Federal tax return.
The solar powered Gate Operator is considered a "Qualified Solar Electric Property" authorized by the Internal Revenue
Code Section 25D under the definition provided in paragraph d.2 and as such qualifies for the Residential Energy Efficient
Tax Credit. You will need to complete Federal Form 5695 and attach it to your personal tax return in order to claim this
credit. If you have any questions regarding this Federal Tax Credit, Form 5695 or its instructions, please consult your tax
adviser. You should also check with your state tax agency to see if your state offers any additional solar energy tax
incentives.
What is Covered:
The solar system tax credit applies to the total installed cost of the solar gate operator system. This includes the related
solar panel, gate operator, solar control box, access control device, remote controls, obstruction detection device(s), etc.
DoorKing Model 6002 Swing Gate Actuator (P/N 6002‐080)*
DoorKing Model 6003 Swing Gate Actuator (P/N 6003‐080)*
DoorKing Model 6004 Swing Gate Operator (P/N 6004‐080)*
DoorKing Model 6400 Swing Gate Operator (P/N 6400‐080)*
* To qualify, must be installed with 4302‐113, 4302‐114 or 4302‐115 Solar Control Box
DoorKing Basic Solar Control Box (P/N 4302‐113)
DoorKing Single Gate Solar Control Box (P/N 4302‐114)
DoorKing Dual Gate Solar Control Box (P/N 4302‐115)
DoorKing Solar Panel (P/N 2000‐076 or 2600‐077)
Batteries; two (2) 18 Amp Hour (P/N 1801‐004) or two (2) 35 Amp Hour (P/N 1801‐005)
What is Not Covered:
The cost of the gate itself, or work required to place the physical gate into proper working order (leveling, replacing hinges,
etc.).
Qualifications:
•
The installation of a DoorKing Solar Powered Gate System
•
Effective for tax years beginning after December 31, 2008
•
Homeowners will need to use The Federal Tax Credit form 5695, Residential Energy Efficient Property Credit
•
Homeowners will need to provide a copy of the "Manufacturer's Certification for Credit"
•
The dwelling must be located in the United States and used as a residence by the taxpayer
•
This offer is only available in the United States
Section A1, Page 2
Specifications subject to change without notice.
April 2015
Vehicular Gate Operators
Page Rev 4/1/15
Table of Contents
Swing Gate Operators
Model 6002 / 6003 ................................................................................................................................................. 4
Model 6004 / 6400 ................................................................................................................................................. 5
Model 6050 / 6100 ................................................................................................................................................. 6
Model 6300 ............................................................................................................................................................ 7
Model 6500 ............................................................................................................................................................ 8
Model 6524 ............................................................................................................................................................ 9
Model 6550 .......................................................................................................................................................... 10
Swing Gate Accessories ........................................................................................................................................ 11
Swing Gate Operator Parts & Accessories ............................................................................................................ 12
Slide Gate Operators
Model 9050 / 9100 ............................................................................................................................................... 14
Model 9150 .......................................................................................................................................................... 15
Model 9000 .......................................................................................................................................................... 16
Model 9024 .......................................................................................................................................................... 17
Slide Gate V-Wheels ............................................................................................................................................. 18
Slide Gate Guide Rollers & Accessories ................................................................................................................ 19
Slide Gate Operator Parts & Accessories.............................................................................................................. 20
Entrapment & Vehicular Reversing Devices
Entrapment Protection Devices Type B1 and B2 .................................................................................................. 22
Loop Detectors and Loops .................................................................................................................................... 23
Gate Operator Accessories
Gate Operator Control Stations............................................................................................................................ 24
Postal and Fire Department Lock Boxes ............................................................................................................... 25
Time Clocks, Surge Suppressers, Traffic Signal ..................................................................................................... 26
Accessory Transformers ....................................................................................................................................... 27
Back-up Power Inverters
Model 1000 .......................................................................................................................................................... 28
Specifications subject to change without notice.
Section A1, Page 3
Vehicular Gate Operators
April, 2015
Page Rev 4/1/15
Models 6002 / 6003
24 Volt DC Swing Gate Actuators
Swing gate actuators are designed to operate vehicular swing gates in residential applications where side room is minimal.
These actuators install directly on the swing gate and operate on 24 Volt DC power. Control boxes are designed for both
single and dual (bi-parting) gate operation and are powered by 120 VAC or 24 VDC with Solar power input.
Step 1: Choose an Actuator
6002-080 (24 VDC)
6003-080 (24 VDC)
Step 2: Choose a Control Box
4302-111 Standard Control Box (120 VAC)
4302-112 Deluxe Control Box (120 VAC)
•
120 VAC control boxes include two (2) 3.5 Ah batteries
•
Deluxe control box includes three 120 VAC
convenience outlets
4302-113 Solar Control Box (No Batteries)
4302-114 Solar Control Box (w/two 18 Ah batteries)
4302-115 Solar Control Box (w/two 35 Ah batteries)
2000-077 24 Volt, 10 Watt Solar Panel
•
Use with 18 Ah batteries
2000-076 24 Volt, 20 Watt Solar Panel
•
Use with 35 Ah batteries
Accessories
Entrapment prevention devices (required)..................... Pg 20
Loops and loop detectors ............................................... Pg 21
8040-080 Ultra Low Power RF Receiver
2000-110 Solar Panel Mount Bracket
2600-755 30-ft. Bi-parting gate connection cable
2600-756 40-ft. Bi-parting gate connection cable
2600-757 50-ft. Bi-parting gate connection cable
Swing gate accessories ..............................................Pg 10-11
Gate operator accessories .........................................Pg 22-24
**
Maximum Cycles on Backup Power**
Model
Max Gate
Weight (lbs.)
Max Gate
Width (ft.)
Max Cycles
(day)
3.5 Ah
18 Ah
35 Ah
6002
500
14
100
100
600
1200
6003
300
10
100
100
600
1200
Cycles shown are for single operators when solar panel(s) are not providing a charge to the batteries. Actual number of cycles will vary
depending on usage, accessories connected, gate weight, operating condition of gate, temperature, location, weather (cloud coverage)
and charge state of the batteries.
Section A1, Page 4
Specifications subject to change without notice.
April 2015
Vehicular Gate Operators
Page Rev 4/1/15
Models 6004 / 6400
24 Volt DC Swing Gate Operators
The DKS Model 6004 mounts directly on the gate column while the DKS 6400 installs in-ground making it virtually invisible.
These units operate on 24 Volt DC power. Control boxes are designed for both single and dual (bi-parting) gate operation
and are powered by 120 VAC or 24 VDC with Solar power input.
Step 1: Choose an Operator
6004-080 (24 VDC)
6400-080 (24 VDC)
Step 2: Choose a Control Box
4302-111 Standard Control Box (120 VAC)
4302-112 Deluxe Control Box (120 VAC)
•
120 VAC control boxes include two (2) 3.5 Ah batteries
•
Deluxe control box includes three 120 VAC
convenience outlets
4302-113 Solar Control Box (No batteries)
4302-114 Solar Control Box (w/two 18 Ah batteries)
4302-115 Solar Control Box (w/two 35 Ah batteries)
2000-077 24 Volt, 10 Watt Solar Panel
•
Use with 18 Ah batteries
2000-076 24 Volt, 20 Watt Solar Panel
•
Use with 35 Ah batteries
Accessories
Entrapment prevention devices (required) .....................Pg 20
Loops and loop detectors................................................Pg 21
8040-080 Ultra Low Power RF Receiver
2000-110 Solar Panel Mount Bracket
2600-755 30-ft. Bi-parting gate connection cable
2600-756 40-ft. Bi-parting gate connection cable
2600-757 50-ft. Bi-parting gate connection cable
Swing gate accessories .............................................. Pg 10-11
Gate operator accessories ........................................ Pg 22-24
**
Maximum Cycles on Backup Power**
Model
Max Gate
Weight (lbs.)
Max Gate
Width (ft.)
Max Cycles
(day)
3.5 Ah
18 Ah
35 Ah
6004
500
8
100
100
600
1200
6400
300
8
100
100
600
1200
Cycles shown are for single operators when solar panel(s) are not providing a charge to the batteries. Actual number of cycles will vary
depending on usage, accessories connected, gate weight, operating condition of gate, temperature, location, weather (cloud coverage)
and charge state of the batteries.
Specifications subject to change without notice.
Section A1, Page 5
Vehicular Gate Operators
April, 2015
Page Rev 4/1/15
Models 6050 / 6100
Automatic Limit Swing Gate Operators
These operators can be installed on mounting posts or directly onto a concrete mounting-pad. When ordering, choose
both an operator AND an operator mounting kit. Secondary operators are used in bi-parting (dual) gate applications and
are commanded from and powered from the primary operator. Secondary operators cannot be used as a stand-alone
device.
Step 1: Choose an Operator or Operator Set
6050-080 1/2 HP, 115V (4.3A) Primary
6050-081 1/2 HP, 115V (4.3A) Secondary
•
Secondary includes 30-ft interconnection cable
6100-080 1/2 HP, 115V (5.4A) Primary
6100-081 1/2 HP, 115V (5.4A) Secondary
6100-082 1/2 HP, 115V (5.4A) Primary w/C.O.
6100-083 1/2 HP, 115V (5.4A) Secondary w/C.O.
•
Secondary includes 40-ft interconnection cable
•
C.O. = Convenience Open (gate opens upon AC power
loss)
Step 2: Choose an Arm / Mounting Kit(s)
2600-671 Pad Mount, Arms and Hardware Kit
2600-674 Post Mount, Arms and Hardware Kit
Accessories
Entrapment prevention devices (required)..................... Pg 20
Loops and loop detectors ............................................... Pg 21
Backup power inverters .................................................. Pg 26
1601-154 Heater Kit
•
Use if temperature routinely falls below 10°F (-12°C)
6500-490 Uphill Arm Pivot Assembly
•
Use with 1203-084 Torsion Rod Assembly (Pg 10)
Swing gate accessories ..............................................Pg 10-11
Gate operator accessories .........................................Pg 22-24
Model 6050 / 6100 Maximum Capacities
Model
Max Gate
Weight (Lbs)
Max Gate
Width (Ft)
Max Cycles
(Per Day)
6050
400
10
100
6100
500
14
Cont
6100 w/C.O.
400
14
Cont
Section A1, Page 6
Specifications subject to change without notice.
April 2015
Vehicular Gate Operators
Page Rev 4/1/15
Model 6300
Automatic Limit Swing Gate Operators
Designed to operate large vehicular swing gates in residential, commercial and industrial applications. These operators
can be installed on mounting posts or directly onto a concrete mounting-pad – select mounting kit when ordering.
Secondary operators are used in bi-parting (dual) gate applications and cannot be used as a stand-alone device.
Step 1: Choose an Operator or Operator Set
6300-080 1/2 HP, 115V (5.4A) Primary
6300-081 1/2 HP, Secondary
6300-082 1/2 HP, 115V (5.4A) Primary w/C.O.
6300-083 1/2 HP, Secondary w/C.O.
•
Secondary includes 50-ft interconnection cable
•
C.O. = Convenience Open (gate opens upon AC power
loss)
6300-084 1 HP, 115V (9.7A) Primary
6300-085 1 HP, Secondary
6300-086 1 HP, 115V (9.7A) Primary w/C.O
6300-087 1 HP, Secondary w/C.O.
•
Secondary includes 50-ft interconnection cable
•
C.O. = Convenience Open (gate opens upon AC power
loss)
Step 2: Choose a Mounting Kit(s)
2600-264 Pad Mount, Arms and Hardware Kit
2600-263 Post Mount, Arms and Hardware Kit
High Voltage Kit
2600-266 High Voltage Kit
•
Allows the operator to be powered from 208, 230, 460
or 575 source voltage. In dual gate applications, only
one (1) kit is required (secondary operator DOES NOT
require a high voltage kit).
Accessories
Entrapment prevention devices (required) .....................Pg 20
Loops and loop detectors................................................Pg 21
Backup power inverters ..................................................Pg 26
1601-154 Heater Kit 115 VAC
Model 6300 Maximum Capacities
Model
Max Gate
Weight (Lbs)
Max Gate
Width (Ft)
Max Cycles
(Per Day)
1/2 HP
700
18
Cont
1/2 HP w/C.O.
600
18
Cont
1 HP
800
22
Cont
1 HP w/C.O.
700
22
Cont
Specifications subject to change without notice.
1601-197 Heater Kit 208/230 VAC
1601-198 Heater Kit 460 VAC
6500-490 Uphill Arm Pivot Assembly
•
Use with 1203-084 Torsion Rod Assembly (Pg 10)
Swing gate accessories .............................................. Pg 10-11
Gate operator accessories ........................................ Pg 22-24
Section A1, Page 7
Vehicular Gate Operators
April, 2015
Page Rev 4/1/15
Model 6500
Adjustable Limit Swing Gate Operators
Designed to operate large vehicular swing gates in residential, commercial and industrial applications. Secondary
operators are used in bi-parting (dual) gate applications cannot be used as a stand-alone device.
Operators
6500-080 1/2 HP, 115V (5.4A) Primary
6500-081 1/2 HP, Secondary
6500-082 1/2 HP, 115V (5.4A) Primary w/C.O.
6500-083 1/2 HP, Secondary w/C.O.
•
Secondary includes 50-ft interconnection cable
•
C.O. = Convenience Open (gate opens upon AC power
loss)
6500-084 1 HP, 115V (9.7A) Primary
6500-085 1 HP, Secondary
6500-086 1 HP, 115V (9.7A) Primary w/C.O
6500-087 1 HP, Secondary w/C.O.
•
Secondary includes 50-ft interconnection cable
•
C.O. = Convenience Open (gate opens upon AC power
loss)
High Voltage Kit
2600-266 High Voltage Kit
•
Allows the operator to be powered from 208, 230, 460
or 575 source voltage. In dual gate applications, only
one (1) kit is required (secondary operator DOES NOT
require a high voltage kit).
Accessories
Entrapment prevention devices (required)..................... Pg 20
Loops and loop detectors ............................................... Pg 21
Backup power inverters .................................................. Pg 26
6500-480 Heater Kit 115 VAC
1601-197 Heater Kit 208/230 VAC
1601-198 Heater Kit 460 VAC
6500-490 Uphill Arm Pivot Assembly
•
Model 6500 Maximum Capacities
Model
Max Gate
Weight (Lbs)
Max Gate
Width (Ft)
Max Cycles
(Per Day)
1/2 HP
700
18
Cont
1/2 HP w/C.O.
600
18
Cont
1 HP
800
22
Cont
1 HP w/C.O.
700
22
Cont
Section A1, Page 8
Use with 1203-084 Torsion Rod Assembly (Pg 10)
Swing gate accessories ..............................................Pg 10-11
Gate operator accessories .........................................Pg 22-24
Specifications subject to change without notice.
April 2015
Vehicular Gate Operators
Page Rev 4/1/15
Model 6524
Adjustable Limit DC Swing Gate Operator
The model 6024’s main power source is 115 or 230 Volt (switch selectable) single-phase AC power. The operational
voltage of the operator is 24 Volt DC and includes built-in battery backup (7.5 AH battery x 2) that provides continued gate
operation if the main source power is lost. This operator is designed to operate vehicular swing gates in residential and
light commercial applications.
Operator
6524-080 1/2 HP, 24V DC (1.8A / 0.9A)
•
115 or 230 VAC Input power
6524-081 1/2 HP, 24V DC (8.5A)
•
24 VDC Solar Input power only (supply your own
batteries and solar system or use DKS solar kit)
Options
1801-004 12-Volt, 18 Amp Hour Battery
•
Two (2) required.
Accessories
Entrapment prevention devices (required) .....................Pg 20
Loops and loop detectors................................................Pg 21
Backup power inverters ..................................................Pg 26
6550-480 Heater Kit 115 VAC
1601-197 Heater Kit 208/230 VAC
•
Heaters are active only when AC source power is
present
6500-490 Uphill Arm Pivot Assembly
•
Use with 1203-084 Torsion Rod Assembly (Pg 10)
Swing gate accessories .............................................. Pg 10-11
Gate operator accessories ........................................ Pg 22-24
Max Gate
Weight (lbs.)
Max Gate
Width (ft.)
Max Cycles
AC Power
800
16
Continuous
**
Maximum Cycles on Backup
Power**
7.5 Ah
18 Ah
40
150
Actual number of cycles will vary depending on usage, accessories connected, gate weight,
operating condition of gate, temperature and charge state of the batteries.
Specifications subject to change without notice.
Section A1, Page 9
Vehicular Gate Operators
April, 2015
Page Rev 4/1/15
Model 6550
Adjustable Limit Swing Gate Operators
Designed to operate very large vehicular swing gates in commercial and industrial applications. Secondary operators are
used in bi-parting (dual) gate applications cannot be used as a stand-alone device.
Operators
6550-080 1 HP, 115V (9.7A) Primary
6550-084 1 HP, Secondary
•
Secondary includes 50-ft interconnection cable
High Voltage Kit
2600-266 High Voltage Kit
•
Allows the operator to be powered from 208, 230, 460
or 575 source voltage. In dual gate applications, only
one (1) kit is required (secondary operator DOES NOT
require a high voltage kit).
Accessories
Entrapment prevention devices (required)..................... Pg 20
Loops and loop detectors ............................................... Pg 21
Backup power inverters .................................................. Pg 26
6550-480 Heater Kit 115 VAC
1601-197 Heater Kit 208/230 VAC
1601-198 Heater Kit 460 VAC
6500-490 Uphill Arm Pivot Assembly
•
Use with 1203-084 Torsion Rod Assembly (Pg 10)
Swing gate accessories ..............................................Pg 10-11
Gate operator accessories .........................................Pg 22-24
Model 6550 Maximum Capacities
Model
Max Gate
Weight (Lbs)
Max Gate
Width (Ft)
Max Cycles
(Per Day)
1 HP
2000
25
Cont
Section A1, Page 10
Specifications subject to change without notice.
April 2015
Vehicular Gate Operators
Page Rev 4/1/15
Swing Gate Accessories
Hinges, Torsion Rod Counter-Balance
The DKS Swing Gate Hinges are designed for heavy wrought iron gates. When using the flange style hinge, two are used at
the extreme top and bottom of the gate. When using the standard style hinge, the hinge can be welded to a gate
mounting post at almost any position and to the gate itself. For un-level swing gates, the torsion rod assembly provides a
method to counter-balance the gate to prevent gate runaway and relieves pressure on the gate operator. By adding
additional torsion rods (6 maximum), heavier gates can be accommodated.
1200-009
1200-010
Flange Bearing Hinge
Gate frame shown
for clarification only
1200-009 3000 Lb Weight Capacity
1200-010 Replacement Bearing
2.00
4.50
1.50
4.50
4.25
1200-019
•
Zert grease fitting
•
Includes mounting bracket and hardware
•
Two required per gate (top, bottom)
•
Designed for use with 2” gate frame
1200-039
Sealed Bearing Hinge
1200-019 2000 Lb Weight Capacity
1200-039 3000 Lb Weight Capacity
3.125
4.00
2.75
•
Includes mounting bracket and hardware
•
Two required per gate (top, bottom)
•
Designed for use with round or square gate frames
3.75
Torsion Rod Assembly
1203-084
1203-084
2600-299 Additional Torsion Rods
4.00
1.50
2.50
1.50
2.50
•
Counter-balances uphill swing gates
•
Includes top bracket, bottom bracket and one (1)
torsion rod
•
Up to five (5) additional torsion rods can be added
2.875
Specifications subject to change without notice.
Section A1, Page 11
Vehicular Gate Operators
April, 2015
Page Rev 4/1/15
Swing Gate Operator Parts & Accessories
Miscellaneous Parts & Accessories
Circuit Boards
Base Plate, Mounting Pipes, Pivot Arm
4302-010
2600-664 Concrete Base Plate
Used in models 6002, 6003, 6004 and 6400
Use to mount the 6050 or 6100 post mount operators onto
an existing concrete pad
4405-010
Used in model 6500, 6550
4502-009
Replacement PCB for models 601, 602, 605, 610, 615, 620,
625, 630
2600-260 Mounting Pipe
Use with 6050 and 6100 post mount operators. 2-1/2 O.D. x
3-ft pipe, threaded on one end
Used in models 6050, 6100 and 6300
6500-490 Uphill Arm Pivot Assembly
Use with 6050, 6100, 6300 and 6500 operators when the
gate opens on an uphill or downhill slope. Should be used
with 1203-084 Torsion Rod Assembly.
2340-010
Bi-Parting Connection Cable
Used in models 6100 and 6300 with convenience open option
2600-754 Primary / Secondary Cable
4502-010
500-ft roll
2600-755 Primary / Secondary Cable
Replacement Parts & Components
30-ft roll
3004-010 Magnetic Counter Probe
2600-756 Primary / Secondary Cable
Used in 601, 602, 605, 610, 615, 630, 6050, 6100, 6300
operators
40-ft roll
2600-757 Primary / Secondary Cable
6100-210 80-Tooth Worm Gear Kit
50-ft roll
Includes clutch pads and 80-tooth delrin main drive gear for
605, 610, 615, 6050 and 6100 operators
Miscellaneous
2801-002 Clutch Disc
2600-770 Moly D Grease
2600-644 100-Tooth Worm Gear
14 oz. tube Molybdenum Disulfide (Moly D) multi-purpose
grease for swing gate worm gears
100-tooth delrin main drive gear for 620, 625, 630 and 6300
operators
2600-220 Touch-up Paint, White
6100-040 Cross-Shaft Housing Assembly
Includes cast housing, cross-shaft, worm drive gear and
related hardware. Does not include output shaft, clutch
plates or clutch disc. Used in 6050 and 6100 operators
2600-221 Touch-up Paint, Light Gray
2600-222 Touch-up Paint, Tan
2600-223 Touch-up Paint, Charcoal Gray
6300-042 Cross-Shaft Housing Assembly
Includes cast housing, cross-shaft, worm drive gear and
related hardware. Does not include output shaft, clutch
plates or clutch disc. Used in 6300 operators
Batteries
1801-009 Battery
2600-675 Main Shaft
12 Volt, 3.5 Amp Hour
Replacement main shaft for 605, 610, 6050 and 6100
operators
1801-004 Battery
2600-174 Main Shaft
Replacement main shaft for 630 and 6300 operators
4601-058 Fuse 5A
12 Volt, 18 Amp Hour
1801-005 Battery
12 Volt, 35 Amp Hour
Used on 4302 -010 circuit board
Section A1, Page 12
Specifications subject to change without notice.
April 2015
Vehicular Gate Operators
Page Rev 4/1/15
Blank Page
Specifications subject to change without notice.
Section A1, Page 13
Vehicular Gate Operators
April, 2015
Page Rev 4/1/15
Models 9050 / 9100
Automatic Limit Slide Gate Operators
The model 9050 is designed for limited-duty residential applications only. The model 9100 is designed for continuous-duty
residential and commercial applications and has a full feature circuit board. 20-feet of #40 chain is included with these
operators.
Operators
9050-080 1/2 HP, 115V (4.3A)
9100-080 1/2HP, 115V (5.4A)
Options
2600-862 Fail-secure lock kit
Accessories
Entrapment prevention devices (required)..................... Pg 20
Loops and loop detectors ............................................... Pg 21
Backup power inverters .................................................. Pg 26
1601-154 Heater Kit 115 VAC
•
Use if temperature routinely falls below 10°F (-12°C)
2600-418 Base plate (use for post mounting)
2600-755 30-ft. Bi-parting gate connection cable
2600-756 40-ft. Bi-parting gate connection cable
2600-757 50-ft. Bi-parting gate connection cable
Additional chain .............................................................. Pg 18
Slide gate accessories ................................................Pg 16-18
Gate operator accessories .........................................Pg 22-24
Model 9050 / 9100 Maximum Capacities
Model
Max Gate
Weight (Lbs)
Max Gate
Length (Ft)
Max Cycles
(Per Day)
9050
500
16
100
9100
1000
30
Cont
Section A1, Page 14
Specifications subject to change without notice.
April 2015
Vehicular Gate Operators
Page Rev 4/1/15
Model 9150
Automatic Limit Slide Gate Operators
The model 9150 slide gate operator is designed to operate vehicular sliding gates in residential commercial and industrial
applications. The operator has a full feature circuit board and includes 20-feet of #40 chain.
Operators
9150-084 1/2 HP, 115V (5.4A)
9150-086 1/2 HP, 115V (5.4A) w/C.O.
9150-080 1 HP, 115V (9.7A)
9150-082 1 HP, 115V (9.7A) w/C.O
•
C.O. = Convenience Open which opens gate upon AC
power loss
High Voltage Kit
2600-266 High Voltage Kit
•
Allows the operator to be powered from 208, 230, 460
or 575 source voltage.
Options
2600-865 Fail-secure lock kit
Accessories
Entrapment prevention devices (required) .....................Pg 20
Loops and loop detectors................................................Pg 21
Backup power inverters ..................................................Pg 26
1601-154 Heater Kit 115 VAC
1601-197 Heater Kit 208/230 VAC
1601-198 Heater Kit 460 VAC
2600-495 Base plate (use for post mounting)
Additional chain ..............................................................Pg 18
Bi-parting gate connection cable ....................................Pg 18
Slide gate accessories ............................................... Pg 16-18
Gate operator accessories ........................................ Pg 22-24
Model 9150 Maximum Capacities
Motor
Max Gate
Weight (lbs.)
Max Gate
Length (ft.)
Cycles
(day)
1/2 HP
1000
30
Cont.
1/2 HP w/C.O.
800
30
Cont.
1 HP
1500
45
Cont.
1 HP w/C.O.
1300
45
Cont.
Specifications subject to change without notice.
Section A1, Page 15
Vehicular Gate Operators
April, 2015
Page Rev 4/1/15
Model 9000
Adjustable Limit Slide Gate Operators
The model 9000 slide gate operator is designed to operate vehicular sliding gates in residential commercial and industrial
applications. The operator has a full feature circuit board and includes 20-feet of #40 chain. Secondary operators are used
in bi-parting (dual) gate applications and are commanded from and powered from the primary operator. Secondary
operators cannot be used as a stand-alone device.
Operators
9000-080 1/2 HP, 115V (5.4A) Primary
9000-081 1/2 HP, 115V (5.4A) Secondary
High Voltage Kit (1/2 HP operator only)
2600-266 High Voltage Kit
•
Allows the operator to be powered from 208, 230, 460
or 575 source voltage.
9000-085 1 HP, 115V (9.7A) Primary
9000-086 1 HP, 115V (9.7A) Secondary
9000-087 1 HP, 208V 1Ø (5.0A)
9000-088 1 HP, 230V 1Ø (4.9A)
•
Secondary operator is not available for 208 / 230 Volt
1Ø units
Accessories
Entrapment prevention devices (required)..................... Pg 20
Loops and loop detectors ............................................... Pg 21
Backup power inverters .................................................. Pg 26
1601-154 Heater Kit
1601-197 Heater Kit 208/230 VAC
1601-198 Heater Kit 460 VAC
9000-015 Post Mount Kit
•
Includes baseplate, mounting posts and hardware.
2600-755 30-ft. Bi-parting gate connection cable
2600-756 40-ft. Bi-parting gate connection cable
2600-757 50-ft. Bi-parting gate connection cable
Additional chain .............................................................. Pg 18
Slide gate accessories ................................................Pg 16-18
Gate operator accessories .........................................Pg 22-24
Model 9000 Maximum Capacities
Motor
Max Gate
Weight (lbs.)
Max Gate
Length (ft.)
Cycles
(day)
1/2 HP
1000
35
Cont.
1 HP
1500
35
Cont.
Section A1, Page 16
Specifications subject to change without notice.
April 2015
Vehicular Gate Operators
Page Rev 4/1/15
Model 9024
Adjustable Limit DC Slide Gate Operator
The model 9024’s main power source is 115 or 230 Volt (switch selectable) single-phase AC power. The operational
voltage of the operator is 24 Volt DC and includes built-in battery backup (7.5 AH battery x 2) that provides continued gate
operation if the main source power is lost. This operator is designed to operate vehicular slide gates in residential and
light commercial applications.
Operators
9024-080 1/2 HP, 24V DC (1.8A / 0.9A)
•
115 0r 230 VAC Input power.
9024-081 1/2 HP, 24V DC (8.5A)
•
24 VDC Solar Input power only (supply your own
batteries and solar system or use DKS solar kit)
Options
1801-004 12-Volt, 18 Amp Hour Battery
•
Two (2) required.
Accessories
Entrapment prevention devices (required) .....................Pg 20
Loops and loop detectors................................................Pg 21
Backup power inverters ..................................................Pg 26
1601-154 Heater Kit
1601-197 Heater Kit 208/230 VAC
•
Heaters are active only when AC source power is
present
9000-015 Post Mount Kit
•
Includes baseplate, mounting posts and hardware.
Additional chain ..............................................................Pg 18
Slide gate accessories ............................................... Pg 16-18
Gate operator accessories ........................................ Pg 22-24
Max Gate
Weight (lbs.)
Max Gate
Width (ft.)
Max Cycles
AC Power
1000
40
Continuous
**
Maximum Cycles on Backup
Power**
7.5 Ah
18 Ah
40
150
Actual number of cycles will vary depending on usage, accessories connected, gate weight,
operating condition of gate, temperature and charge state of the batteries.
Specifications subject to change without notice.
Section A1, Page 17
Vehicular Gate Operators
April, 2015
Page Rev 4/1/15
Slide Gate Accessories
V-Wheels
DKS V-wheels are used in slide gate applications that utilize an inverted “V” type track. V-Wheel assemblies are designed
for 2 inch gate frames and tandem assemblies can be used on any size frame.
Replacement V-Wheels
1201-004
•
4-inch UHMW Sleeve Bearing 500 Lb Max Wt
1201-006
•
4-inch UHMW Sealed Bearing 750 Lb Max Wt
1201-016
•
4-inch Steel Sealed Bearing 1500 Lb Max Wt
1201-000
•
6-inch Steel Sealed Bearing 2500 Lb Max Wt
V-Wheel Assemblies
1201-102
•
4-inch UHMW Sleeve Bearing 500 Lb Max Wt
1201-105
•
4-inch UHMW Sealed Bearing 750 Lb Max Wt
1201-117
•
4-inch Steel Sealed Bearing 1500 Lb Max Wt
4 Inch Tandem V-Wheel Assemblies
1201-012
•
4-inch UHMW Sealed Bearing 1500 Lb Max Wt
1201-010
•
4-inch Steel Sealed Bearing 3000 Lb Max Wt
6 Inch Tandem V-Wheel Assembly
1201-210
•
Section A1, Page 18
6-inch Steel Sealed Bearing 5000 Lb Max Wt
Specifications subject to change without notice.
April 2015
Vehicular Gate Operators
Page Rev 4/1/15
Slide Gate Accessories
Guide Rollers, Chain Idler, End Catch
Guide rollers are guarded to meet current industry safety standards. The DKS chain idler assembly is used when slide gate
operators are rear-mounted. The end retainer provides a guide for slide gates to slip into, and has a cap that prevents the
gate from being lifted off the track when it is in the full closed position.
4.5
3 Inch Guide Rollers
8.25
1204-120 Single
1204-122 Dual
3.25
Adjustable
1.25 – 2.125
Adjustable
1.25 – 2.125
4.00
Adjustable
.875 – 2.625
1204-005 3-Inch replacement roller
•
1204-120
Use two for 6-inch roller
1204-122
4.50
8.25
6 Inch Guide Rollers
1204-121 Single
1204-123 Dual
3.25
Adjustable
1.25 – 2.125
Adjustable
1.25 – 2.125
Adjustable
.875 – 2.625
7.00
1204-121
1204-123
4.00
Chain Idler Assembly
2.00
2600-818
•
7.00
Use with rear-mount slide gate operators. Works with
#40 and #41 chain
5.00
2600-818
End Catch
2.00
1204-004
•
5.50
3.125
Designed for gates with 2-inch frame
2.75
4.50
1204-004
Specifications subject to change without notice.
Section A1, Page 19
Vehicular Gate Operators
April, 2015
Page Rev 4/1/15
Slide Gate Operator Parts & Accessories
Miscellaneous Parts & Accessories
Circuit Boards
Chain
4402-009
2600-443 Nickel Plated #41 Chain – 10 Ft
Used in model 9300 1 HP only
2600-444 Nickel Plated #40 Chain – 10 Ft
4402-010
Used in models 1150, 9200, 9300 (1/2 HP only)
2600-475 Stainless Steel #41 Chain – 20 Ft
4403-010
2600-441 #41 Chain – 20 Ft
Used in model 9310
2600-442 #40 Chain – 20 Ft
4405-010
2600-271 Chain Stop for #40 and #41 Chain
Used in model 9000
2600-961 Chain Link Fence Gate Bracket
4602-009
Base Plates
Replacement PCB for models 910, 915, 920
4602-010
Used in models 9100, 9150
4702-009
Replacement PCB for models 905, 907
4702-010
Used in models 9050, 9070
2340-010
Used in model 9150 with convenience open option
2600-418 Steel Base Plate
Use with 9050 and 9100 operators
2600-495 Steel Base Plate
Use with 9150 operator
2600-970 Base Plate Stop Bracket
Use with 2600-418 and 2600-495
9310-201 Steel Base Plate
Use with 9310 1/2 HP operators
9310-202 Steel Base Plate
Use with 9310 1 HP operators
Bi-Parting Connection Cable
Replacement Parts & Components
2600-903 Drive Shaft Assembly
Used in models 905, 907, 910, 9050, 9070, 9100
2600-904 Drive Shaft Assembly
Used in models 915 and 9150
2600-860 Solenoid Lock Assembly
Used in models 9050, 9070, 9100 and 9150
2600-861 Solenoid Lock Assembly
Used in model 9310 operator
2600-754 Primary / Secondary Cable
500-ft roll
2600-755 Primary / Secondary Cable
30-ft roll
2600-756 Primary / Secondary Cable
40-ft roll
2600-757 Primary / Secondary Cable
50-ft roll
Miscellaneous
1801-009 Battery
2600-220 Touch-up Paint, White
12 Volt, 3-Amp Hour battery
2600-221 Touch-up Paint, Light Gray
2600-222 Touch-up Paint, Tan
2600-223 Touch-up Paint, Charcoal Gray
Section A1, Page 20
Specifications subject to change without notice.
April 2015
Vehicular Gate Operators
Page Rev 4/1/15
Blank Page
Specifications subject to change without notice.
Section A1, Page 21
Vehicular Gate Operators
April, 2015
Page Rev 4/1/15
Entrapment Prevention Devices
Type B1 and Type B2
Entrapment prevention devices are required in almost all general access automated gate applications. Photo-cells are
used as type B1 (non-contact sensors) devices. Electric edges are used as type B2 (contact sensors) devices.
Type B1 Non-Contact Sensors
8080-010 Infrared Thru-Beam
(Do not use with 9200 and 9500 series operators)
8080-010
•
24 Volt AC / DC
•
65-foot maximum sensing distance
•
Separate sender and receiver
•
Includes hood and heated enclosure
8080-011 Photo Reflective
8080-011
•
24 Volt AC / 12 - 24 Volt DC
•
30-foot maximum sensing distance
8080-030 Polarized Photo Reflective
•
24 Volt AC / 24 Volt DC
•
35-foot maximum sensing distance
8080-031 Infrared Thru-Beam
8080-030 / 8080-031
•
24 Volt AC / 24 Volt DC
•
65-foot maximum sensing distance
•
Separate sender and receiver
Type B2 Contact Sensors
8080-016 6-Foot Edge (ME111)
•
Includes mounting channel - ideal for barrier arms
8080-015 5-Foot Edge (ME123)
8080-016
8080-015
8080-020
•
Includes mounting channel
8080-020 5-Foot Edge (MGO20)
•
Sensitive on all 3 sides – includes mounting channel
8080-021 5-Foot Edge (MGR20)
•
Designed to fit on 2-inch round gate post
8080-022 5-Foot Edge (MGS20)
•
8080-021
8080-022
Designed to fit on 2-inch square gate post
Contact Sensor Accessories
8060-061 Wireless RF Kit
•
Receiver (12-24 Volt AC/DC) and transmitter housed in
NEMA 4 enclosure with low battery alarm
8080-017 Coiled Cord 16-Feet
8060-076 Plastic Receiver Box
Section A1, Page 22
Specifications subject to change without notice.
April 2015
Vehicular Gate Operators
Page Rev 4/1/15
Vehicle Protection
Loop Detectors and Loops
Loop detectors and loops are strongly recommended on all automated vehicular gate applications to help prevent gates
from closing on vehicles in the path of the gate.
Plug-in Loop Detectors – DKS operators only
9411-010 DKS Single Channel + Aux Relay
•
9411-010
Use this detector when interfacing barrier gate
operators with a photo-beam for enhanced pedestrian
protection, or in any application where a dry relay
contact is needed in addition to the loop call function.
9410-010 DKS Single Channel
9409-010 DKS Two Channel
Loop Detectors
9402-045 Reno A&E 12/24 Volt DC or 24 Volt AC
9410-010
9409-010
9402-047 Reno A&E 120 Volt AC
•
Reno A&E detectors have 2 relay outputs
•
Reno A&E detectors require 9402-061 wire harness
9402-044 Carlo Gavazzi 24 Volt AC or DC
9402-045 / 9402-047
•
Carlo Gavazzi detector - 2 relay outputs
•
Requires 9402-061 wire harness
9402-050 Diablo 10-30 Volt AC or DC
•
9402-044
Ultra Low Power for solar applications
9402-061 Wire Harness
Loop Wire – 18 AWG – XLPE Insulation
9402-076 500-Ft Roll – Black
9402-050
9402-077 1000-Ft Roll – Black
9402-078 500-Ft Roll – Blue
9402-079 1000-Ft Roll – Blue
9402-080 500-Ft Roll – Red
9402-081 1000-Ft Roll – Red
Prefabricated Loops, 24-Ft Circumference, 50-Ft Lead-In
9401-060 Blue Loop Wire / PLIOVIC Tubing
9401-061 Yellow Loop Wire / PLIOVIC Tubing
9401-062 Red Loop Wire / PLIOVIC Tubing
Loop Miscellaneous
2600-771 Asphalt Sealant (Black) – 10 oz. Tube
2600-772 Concrete Sealant (Gray) – 10 oz. Tube
9401-045 Loop Test Meg-Ohm Meter
Specifications subject to change without notice.
Section A1, Page 23
Vehicular Gate Operators
April, 2015
Page Rev 4/1/15
Control Stations
Manual Control
Gate operator control stations provide complete manual control for DKS vehicular gate operators. The unique logic inputs
found on DKS gate operators require only 3 wires for connection to a 3-button control station.
1200-007
•
3-button interior open-close-stop
•
Mounts into single-gang electric box
•
Use for most DKS gate operators (cannot be used with
model 9000)
1200-006
•
3-button interior/exterior open-close-stop
•
Surface or post mounted
•
Use for most DKS gate operators (cannot be used with
model 9000)
1200-017
Section A1, Page 24
•
Open-hold-normal gate control
•
Mounts into single-gang electric box
Specifications subject to change without notice.
April 2015
Vehicular Gate Operators
Page Rev 4/1/15
Lock Boxes
Postal and Fire Department
Postal and Fire Department lock boxes provide a method for these authorities to gain access through a vehicular access
gate.
2.38
5.00
6.50
POSTAL
LOCK BOX
1402-080
•
Accepts standard postal key lock
•
Postal lock can be installed to either open the 1402
box, or activate a door or gate
•
Surface or post mount
•
Painted postal blue
1402-080
3.63
4.50
FIRE
•
Accepts Fire Department pad lock
•
Cover opens and activates a switch when the pad lock
is removed
•
Gate or door will hold open until the cover is closed
and the pad lock replaced
•
Surface or post mount
•
Painted bright red
5.38
DEPT
1400-080
5.38
4.50
FIRE
1400-080
5.38
1401-080
•
Accepts Knox 3501 key switch
•
Surface or post mount
•
Faceplate painted bright red, box is painted black
DEPT
1401-080
Specifications subject to change without notice.
Section A1, Page 25
Vehicular Gate Operators
April, 2015
Page Rev 4/1/15
Accessories
Time Clock & Surge Suppressers
Electronic time clocks are ideal for use in applications where an access control system does not control “hold open” time
periods. Vehicular gate operators and barrier gate operator systems are typical. Surge suppressers are designed to
provide additional protection to equipment in areas prone to voltage spikes and surges. Surge suppressers come with a
plastic mounting bracket. Red / Green traffic signal is ideal for all vehicular gate applications – providing a visual signal
when the gate is safe to drive through.
Time Clocks
2600-791
2600-791
•
7 Day Time Clock
•
20 programs
•
24 Volt AC input power
•
Form “C” dry contact relay
2600-795
2600-795
1879-080
•
365 Day Time Clock
•
7-Day and 24 hour programming features
•
Holiday programming
•
Automatic leap-year adjustment through 2095
•
Daylight savings time
•
24 Volt AC input power
Surge Suppressers
1879-080
•
High Voltage (110-120 VAC)
1878-010
1878-010
•
Low Voltage (24-20 VAC)
Traffic Signal
1603-208
•
Red / Green traffic signal
•
8-inch lens
1603-208
Section A1, Page 26
Specifications subject to change without notice.
April 2015
Vehicular Gate Operators
Page Rev 4/1/15
Accessory Transformers
12, 16, 24 Volt AC & DC Transformers
A variety of accessory transformers are available to power the different products that we sell. AC transformers are
typically used with access control devices and controllers, while DC transformers are used with magnetic locks and
proximity card readers. Check the individual product to determine which transformer is required. NOTE: Many of our
products INCLUDE a transformer.
11.13
4.50
Transformer Box
1200-080
6.00
•
Holds up to four (4) 20-VA transformers
•
Suitable for indoor and outdoor use
•
Does not include transformers
1200-080
20-VA Transformers
20 VA Transformers
1215-061 12-Volt AC Output
1804-059 24-Volt AC Output
1804-060 16-Volt AC Output
40 VA Transformer
1508-060 16-Volt AC Output
1215-061 12-Volt, AC
1804-059 24-Volt, AC
1804-060 16-Volt, AC
40-VA Transformer
1508-060 16-Volt, AC
DC Transformers
DC Transformers
1812-020 12-Volt, 1000 ma
1812-020 12-Volt 1000 mA
1812-139 24-Volt 500 mA
1812-139 24-Volt, 500 ma
Specifications subject to change without notice.
Section A1, Page 27
Vehicular Gate Operators
April, 2015
Page Rev 4/1/15
Model 1000
Back-up Power / Inverter
The model 1000 Power Inverter is designed to provide backup AC power for the entire vehicular access control system
when primary (AC) power fails. Unlike some backup systems which simply provide DC power for the gate operator itself,
these inverters provide 120 Volt AC power to all components (gate operator, access control system, loop detectors,
reversing devices, emergency vehicle access devices, etc.) of the access control system. The model 1000 is designed to
provide power for two (2) gate operators and related access control system accessories.
Model 1000 Inverter
13.00
8.00
21.00
Model 1000
1000-080 1000 Watt, Modified Sine Wave
•
Includes one (1) battery and will power one (1) 1/2 HP
operator
•
Use only with DoorKing gate operators
1000-082 1000 Watt, Pure Sine Wave
•
Includes two (2) batteries and will power two (2) 1/2
HP operators or one (1) 1 HP operator
•
Suitable for use with all DoorKing and non-DoorKing
brand gate operators
1000-045 Post Mount for 1000 Inverter
1000-048 Battery & Cable Assembly
•
33.00
Order this to add a second battery to the 1000 Watt
inverter
1801-005 Battery
•
12 Volt, 35 AH SLA (Sealed Lead Acid) battery
1000-044 Battery Cable Set
1000-045
Section A1, Page 28
Specifications subject to change without notice.
Download PDF