CWT-11-W122

CWT-11-W122
SPECIFICATION CONTROL DRAWING
Product Revision
Product
Name
CWT-3-W122-9
A
CWT-5-W122-9
A
CWT-6-W122-9
A
CWT-7-W122-9
A
CWT-9-W122-9
A
CWT-11-W122-9
A
CWT-13-W122-9
A
Product Dimensions
øA
øB
L
min
min
max
2.50
3.00
24.50
(0.098)
(0.118)
(0.965)
4.30
4.80
29.30
(0.169)
(0.189)
(1.154)
6.00
6.70
32.00
(0.236)
(0.264)
(1.260)
6.40
7.30
32.50
(0.252)
(0.287)
(1.280)
8.70
9.20
35.50
(0.343)
(0.362)
(1.398)
10.00
11.50
35.50
(0.394)
(0.453)
(1.398)
13.00
15.00
45.50
(0.512)
(0.591)
(1.791)
øD
max
3.00
(0.118)
4.80
(0.189)
6.70
(0.264)
7.30
(0.287)
9.20
(0.362)
11.50
(0.453)
15.10
(0.594)
Cable Dimensions
øF
øG
min
max
1.00
2.50
(0.040)
(0.098)
1.50
4.30
(0.059)
(0.169)
2.80
6.00
(0.110)
(0.236)
2.80
6.40
(0.110)
(0.252)
4.00
8.70
(0.157)
(0.343)
4.00
10.00
(0.157)
(0.394)
6.50
13.00
(0.256)
(0.512)
øE
min
1.50
(0.059)
2.00
(0.079)
3.30
(0.130)
3.30
(0.130)
4.50
(0.177)
4.50
(0.177)
7.00
(0.276)
J
7.00±0.50
(0.276±0.020)
9.00±0.50
(0.354±0.020)
10.00± 0.50
(0.394±0.020)
11.00±1.00
(0.433±0.040)
12.00± 1.00
(0.472±0.040)
13.00±1.00
(0.512±0.040)
17.00±1.00
(0.669±0.040)
MATERIALS
1. INSULATION SLEEVE: Transparent heat-shrinkable radiation cross-linked modified polyolefin.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Cd18 per ANSI/J-STD-006.
FLUX:
TYPE ROM1 per ANSI/J-STD-004.
3. MELTABLE SEALING RING: Thermally stabilized thermoplastic.
4. GROUND LEAD: Raychem cross-linked polyethylene wire, AWG22, stranded tin-plated copper. Color: white.
APPLICATION
1. These controlled soldering devices are designed for termination of a bare or tin-plated copper shield on a cable having an
insulation rated for at least +85°C, meeting the dimensional criteria listed in the table above.
2. Temperature range: -55°C to +125°C.
3. When installed properly, these devices will meet the requirements of Tyco Electronics/Raychem Specification RT-1404.
4. For installation procedure and application equipment, consult Tyco Electronics/Raychem RPIP 824-00.
For best results, prepare
the cable as shown:
Tyco Electronics Corporation
305 Constitutional Drive
Menlo Park, CA 94025 USA
RAYCHEM
SOLDERSLEEVE TERMINATOR WITH
PRE-INSTALLED LEAD
DOCUMENT NO.:
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
DRAWN BY:
TITLE:
CWT-XX-W122-9
Tyco Electronics reserves the right to amend
this drawing at any time. Users should evaluate
the suitability of the product for their
ROUGHNESS IN
application.
MICRON
CAGE CODE:
REPLACES:
DCR NUMBER:
ANGLES: N/A
M. FORONDA
06090
D020487
D030071
If this document is printed it becomes uncontrolled. Check for the latest revision.
DOC. ISSUE:
DATE:
1
PROD. REV.:
SEE TABLE
8-May-03
SCALE:
None
SIZE:
A
SHEET:
1 of 1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement