Blue Rhino | 253341 | Miller ROPAX harness

R
www.
.be
FALL PROTECTION
PERSONALPROTECTIVE EQUIPMENT
Westkaai 7
2170 Merksem - Antwerpen
Tél. 03 646 99 60 - Fax 03 646 00 25
e-mail : info@safetyshop.be
THE FOUNDATIONS OF A PERSONAL FALL ARREST SYSTEM
Standards
ANCHOR DEVICES
Used to join the connecting device (work restraint,
fall arrester) to the anchorage point, commonly referred to as
the "tie-off point" (I-beam, scaffolding or other structural
point)
EN12841/C Rope access systems : back-
Anchor devices may be one of the 2 types :
• Permanent anchor devices
(e.g. horizontal cable lifeline, horizontal rail systems...)
• Temporary anchor devices
(e.g. steel strops, scaffold hooks, webbing anchorage
slings, beam grips and dead-weight anchor...)
FULL BODY HARNESS
Used to hold the worker if a fall occurs
Anchor devices may be one of the 2 types :
• Full body harness must be worn for Fall Arrest situations
• Work restraint belts cannot be used for Fall Arrest
172
CONNECTING DEVICES
Used as intermediate attachment to connect the
worker's harness to the anchor device
(e.g. shock absorbing lanyard, self retracting lifeline, fall
limiter, rope grab etc.)
Connecting devices may be one of the 2 types :
• Fall Restraint : a fall restraint system prevents
workers from reaching a hazard
• Fall Arrest : a fall arrest system allows workers to
reach a hazard and then protects them if they should fall
up devices
EN341
Descender devices (like
AG10 & RG9)
EN353-1 Guided Type Fall
Arresters–Rigid Anchorage
Line & Rails
EN353-2 Guided Type Fall Arresters–
Flexible Anchorage Line
EN354
Lanyards
EN355
Energy absorbers
EN358
Work Positioning Systems
EN360
Retractable Type Fall
Arresters (Self Retracting
Lifelines)
EN361
Full Body Harnesses
EN362
Connectors
EN363
Fall Arrest Systems
EN795
Anchorage Devices - Types a-e
EN813
Sit Harnesses
FALL PROTECTION
174 MILLER EDGE TESTED RANGE
188 ANCHORAGE POINTS
176 MILLER REVOLUTION HARNESSES
AND CONNECTORS
189 CONNECTORS
178 HARNESSES
190 TITAN RANGE
180 LANYARDS
194 CONFINED SPACE
182 MILLER PERSONAL FALL LIMITERS
197 TECHNICAL ACCESS & RESCUE
184 MILLER FALL ARREST BLOCKS
201 TREE-PRUNING
186 MILLER FALL ARREST KITS
187 ROPE AND WIRE FALL ARRESTERS
203 ARBORICULTURE
USING THE PATENTED WRAPPED
FILAMENT TECHNOLOGY
FALL PROTECTION
MILLER EDGE
TESTED MANYARD
173
MILLER EDGE TESTED RANGE
NEW
An unknown risk !
Whilst the risk of failure on an edge is often present during work at height, this hazard is relatively unknown. A large
number of Miller by Sperian’s customers and partners have been asking the group for a solution to this problem.
The Fall Arrest solution for edges
This technical problem calls for a two-fold solution:The fall arrest equipment should be developed with resistance to
failure on edges whilst also absorbing the fall arrest forces in order to protect the operator from injury. It took 18 months
of development and 300 tests in order to define and perfect this new technology and to offer our clients a reliable
solution.
Edge tested Manyard
The first edge-tested Manyard on the market
FALL PROTECTION
• Patented core-yarn technology.
• Patented technology thanks to the nature of its webbing
(wrapped filament) which combines two types of thread:
one which is shock absorbent to reduce fall arrest forces,
the other which is more robust to resist abrasion on the
edges.
• Integrated shock absorber.
2m MANYARD Tested on edge
+ Scaffold hook with large opening +
Screwgate karabiner
Art. No.
10 179 16
174
User Connector
Connector
Aluminium
screwgate karabiner
Scaffold hook,
large opening aluminium
• Reduced product length, avoids the risk of tripping
or snagging.
• Built-in warning flag.
• Ideal for scaffolding, maintenance, industry and
telecommunications.
• Compliant with the standard EN 355: 2002.
• Draft standard EN 354 for horizontal use and sharp
edge tests.
2m MANYARD Tested on edge
+ 2 Screwgate karabiners
Art. No.
10 179 18
User Connector
Anchorage Connector
Steel screwgate karabiner Steel screwgate karabiner
MILLER EDGE TESTED RANGE
NEW
Edge tested kernmantel lanyard
A range of connectors offers the perfect solution for every
situation.
The double-legged lanyard is ideal for use on pylons since it
enables the operator to climb whilst remaining connected at
all times.
Application :Telecommunications, electricity, industry, building
and construction.
Compliant with the standard EN 355: 2002 – Draft standard.
EN 354 (annex for horizontal use/ tested on sharp edges).
The edge-tested kernmantel lanyard from the Miller by
Sperian range guarantees your safety in the event of a fall on a
edge !
The addition of a shock absorber reduces the fall arrest forces
to under 6kN.
A 12 mm edge-tested kernmantel rope meets the
requirements of all situations at height !
Art. No.
10 168 47
User Connector
Scaffold hook,
small opening aluminium
Connector
Scaffold hook,
large opening aluminium
Rope lanyard with shock absorber 2m D12
Tested on edge +ML00/ML00
Art. No.
10 168 48
User Connector
Steel screwgate karabiner
The edge-tested personal fall limiter by Miller by Sperian
ensures your safety in the event of a fall on an edge.
The addition of a shock absorber reduces the impact
forces due to a fall to under 6kN.
Miller by Sperian’s retractable webbing lifeline with
a quick-activating braking mechanism limits a free fall
to centimetres.
SCORPION Tested on edge
CS20 +SnapHook+specific
webbing resistant
to breakage against edges
10 168 40
User Connector
Scaffold hook,
small opening
aluminium
Art. No.
10 168 49
Connector
Steel
screwgate
karabiner
User Connector
Steel screwgate
karabiner
Art. No.
10 168 50
User Connector
Steel screwgate
karabiner
10 168 41
Anchorage Connector
2 x Scaffold hook,
large opening aluminium
Extremely robust and lightweight, the edge-tested
Scorpion PFL with retractable webbing lifeline contains a
corrosion resistant interior, a steel and aluminium body and
high impact polymer cover (weight: 1.750 kg).
Application: Building, scaffolding.
Compliant with the standard EN 360: 2002.
Tested on sharp edges in accordance with the
CNB/P/11.060 method.
SCORPION Tested On edge
CS20 + Karabiner Opening
63mm + specific webbing
resistant to breakage against
edges
Art. No.
Anchorage Connector
Scaffold hook,
large opening aluminium
Double rope lanyard with shock absorber
1,5m D12 Tested on edge +2SHk/ML00
Anchorage Connector
Steel screwgate karabiner
Edge-tested Personal fall limiter
Art. No.
Rope lanyard with shock absorber 2m D12
Tested on edge +ScafHk/ML00
User
Connector
Aluminium
screwgate
karabiner
Anchorage
Connector
Scaffold hook,
large opening
(63 mm)
SCORPION Tested on edge
SnapHook + Karabiner
Opening 55mm + specific
webbing resistant
to breakage against edges
Art. No.
10 168 42
User
Connector
Scaffold hook,
small opening
aluminium
Anchorage
Connector
Scaffold hook,
large opening
(55 mm)
FALL PROTECTION
Rope lanyard with shock absorber 2m D12
Tested on edge +ScafHk/MS51
175
MILLER REVOLUTION HARNESSES
The turning point in harness design.
Based on key user identified needs, Miller by Sperian
developed 2 distinct ranges of Revolution harnesses.
R1 Miller® Revolution
Basic
Miller Revolution Construction
and Maintenance harnesses
Designed for Construction and Maintenance
activities such as scaffolding, steel erection, tower
building and various maintenance situations, the
PivotLink™ connection is located at waist level for a
better ergonomic fit when bending or squatting.
• The heavy-duty harness
for unrivalled comfort
and freedom of movement
• With standard fixing buckles
Art. No.
10
10
10
10
10
10
142
142
142
142
142
142
Description
Duraflex stretch webbing
Duraflex stretch webbing
Duraflex stretch webbing
DualTech webbing
DualTech webbing
DualTech webbing
20
31
32
33
34
35
Size
S/M
L/XL
XXL*
S/M
L/XL
XXL*
R2 Miller® Revolution
Comfort
R3 Miller® Revolution
Premium
A quick-fitting harness
with protective back shield
• Quick-connect buckles
for easy fit.
• ErgoArmor™ Back shield
for added protection
• Quick-connect buckles
for eas y fit.
• ErgoArmor™ Back shieldfor a
dded protection
• Work positioning belt
Art. No.
10
10
10
10
10
10
142
142
142
142
142
142
36
37
38
39
40
41
Description
Duraflex stretch webbing
Duraflex stretch webbing
Duraflex stretch webbing
DualTech webbing
DualTech webbing
DualTech webbing
Size
S/M
L/XL
XXL*
S/M
L/XL
XXL*
Art. No.
Description
10 142 42 DualTech webbing
10 142 43 DualTech webbing
10 142 44 DualTech webbing
Size
S/M
L/XL
XXL*
Miller Revolution Telecoms and Utilities harnesses
FALL PROTECTION
The ultimate solution for utilities, telecoms, windpower and electricity companies, the PivotLink™ connection is located at
hip level for a smoother movement during ascent and descent.
The pivoting work-positioning belt guarantees a secure hands-free position with full freedom of movement and reach.
176
R4 Miller® Revolution
Telecom
& Utilities Harness
R5 Miller® Revolution
Premium Telecom
& Utilities Harness
• Standard buckles
• Rotating work-positioning belt
A quick-fitting harness
with protective back shield
• Quick fixing buckles
• Rotating work-positioning belt
Art. No.
10
10
10
10
10
10
142
142
142
142
142
142
45
46
47
48
49
50
Description
Duraflex stretch webbing
Duraflex stretch webbing
Duraflex stretch webbing
DualTech webbing
DualTech webbing
DualTech webbing
* product made to order
Size
S/M
L/XL
XXL*
S/M
L/XL
XXL*
Art. No.
10 142 51
10142 52
10 142 53
10 142 54
10 142 55
10 142 56
Description
Duraflex stretch webbing
Duraflex stretch webbing
Duraflex stretch webbing
DualTech webbing
DualTech webbing
DualTech webbing
Size:
S/M
L/XL
XXL*
S/M
L/XL
XXL*
MILLER REVOLUTION HARNESSES
Engineered with 8 unique components !
CAM BUCKLE
Easy one-hand
adjustment allows
simultaneous
adjustment of
shoulder straps.
CUSTOM
IDENTIFICATION
Four brightly coloured
permanent labels allow
customisation for
date, name…
ERGO ARMORTM
BACK SHIELD
Semi-flexible back
shield minimizes impact
from sharp / heavy snap
hooks and self
retracting lifelines
WEB FINIALS
Clip on design safely
organises webbing
after proper
adjustment
INTEGRATED
ACCESSORY
SYSTEM
Modular attachment
design provides
connection points for
tools and accessories
SELF CONTAINED
LABEL PACK
Integrated pack
encapsulates labels
minimizing damage
and loss
2 available webbing options :
DuraFlex® webbing :
Patented elastomer
webbing specially
formulated to stretch
with the user’s
movements so there is
no bunching or binding.
PIVOTLINK™
CONNECTION
Unique rotary design
provides greater
comfort in bending
and mobility
DualTechTM webbing :
Donning made easy with
two-sided contrasting
colour webbing and
textures.
Engineered with shape
retention memory for a
more comfortable fit.
The PivotLink™ provides a
convenient attachment point for
a multitude of accessories and
individual tool pouches. Innovative
in its design, the weight of these
accessories is distributed across
the hips and shoulders for a more
comfortable fit.
Art. No.
Art. No.
10 142 75
10 142 76
Art. No.
Art. No.
10 142 70
10 142 71
Size
S
L
Art. No.
10 142 74
10 142 73
Size
M
L
10
10
10
10
142
142
142
142
78
79
80
81
Colour
Blue (x10)
Yellow (x10)
Red (x10)
Green (x10)
FALL PROTECTION
Accessories
Art. No.
10 142 72
177
HARNESSES
DuraFlex® stretch harnesses
The natural choice for greater mobility
and extreme comfort.
Feel the difference !
Patented Miller DuraFlex® harnesses feature speciallyformulated elastomer webbing that stretches to provide :
Greater Comfort
DuraFlex® harnesses conform to the shape of the worker,
stretching with every movement, so there is no bunching,
binding or kinking.
MA02 – One-point DuraFlex®
harness, rear anchorage,
with TEFLON® finish
Art. No.
10 028 47
10 028 48
Size
M/L
S
FALL PROTECTION
MA60 –
Two-point
DuraFlex® heavyduty harness, with
belt, rear and
front anchorage,
with TEFLON®
finish
Front anchorage
webbing loops.
Art. No.
10 051 36
10 051 37
Size
M/L
S
Improved Safety
With unsurpassed comfort, DuraFlex® harnesses offer
wider end-user acceptance. More importantly,
a comfortable harness is more likely to be worn properly,
enhancing compliance and safety on the jobsite.
Increased Durability
The TEFLON®* high-tech protective finish on the webbing
repels water, oil, grease and dirt and helps to extend the
service life of the harness
MA04 – Two-point DuraFlex®
harness, rear and front
anchorage, with TEFLON®
finish
MA08 – Three-point
DuraFlex® harness, rear and
front anchorage, with
TEFLON® finish
Front anchorage soft webbing loops.
Front anchorage D-rings.
Standard
10 028 49
10 028 50
Size
M/L
S
With fixing buckles
10 076 12
10 076 11
Art. No.
10 028 53
10 028 54
10 049 59
Size
M/L
S
XXL
MA58 –
Three-point
DuraFlex®
harness, with belt,
rear and front
anchorage, with
TEFLON® finish
Front anchorage
D-rings.
Art. No.
10 028 57
10 028 58
10 049 54
Size
M/L
S
XXL
*TEFLON® is a registered trademark of DuPont for its brand of fabric protector. Only DuPont makes TEFLON®. New added value from
Miller® by Sperian for sustained performance and easy care.
178
HARNESSES
Miller DuraFlex® stretch vest harnesses
Engineered for peak performance in all conditions.
The Duraflex® stretch vest harness combines all the benefits of a Duraflex harness in a highly comfortable and practical vest.
• 2-pt Duraflex® stretch harness with front and rear anchorage (front webbing loops) and quick buckles
• Lightweight, durable polyester vest jacket with front zipper, multiple pockets, extra shoulder padding and lateral loops
for tool bags.
• Multiple adjustments for perfect fit. Pressure studs between lining and jacket allow ready access for harness inspection.
• Both the harness and the vest offer excellent chemical and abrasion resistance.
• Miller Vest harnesses are CE certified and comply with EN361 and EN 471 Class 2 (for HI-VIS option).
Miller DuraFlex® vest harness
Art. No.
10 068 82
10 075 50
Size:
M/L
XL
Miller Duraflex® Hi-Vis vest
Harness with side
D-rings & work-positioning
belt
Miller DuraFlex®
Hi-Vis Vest Harness
Yellow
10 100 40
10 103 26
Size
M/L
XL
Orange
Art. No.
10 146 30
10 146 31
10 134 54
10 134 55
Size:
M/L
XL
Miller® speciality harnesses
1-point Kevlar /
Nomex harness for
exceptional heat and
flame resistance.
Rear anchorage
D-ring, adjustable
straps and lanyard
safety clips.
Conforms to EN361.
Art. No.
10 123 36
10 123 37
10 123 38
Size
S
M
L
Miller Atex
Antistatic
harness
Two point antistatic
harness with
protective back pad
and automatic
buckles.
Front anchorage loops
and dorsal extension
strap with webbing
loop.
Conforms to EN361
& ATEX 949CE.
Art. No.
10 150 74
10 150 75
FALL PROTECTION
Miller Kevlar
Harness 650K
Size
S/M
L/XL
179
LANYARDS
Manyard®
Stretchable shock-absorbing lanyard,
for reduced tripping hazards
Light and stretchable, the Miller Manyard® moves with you.
Unsurpassed on the market, it offers :
No tripping or snagging
• A UNIQUE stretchable design for greater
manoeuvrability and safety.
• When contracted, it greatly reduces the risks of tripping,
snagging and dragging.
• A safety clip that straps on to the harness to hold the
Manyard® when not in use, thus limiting tripping risks.
Reduces fall arrest forces
• Special woven shock-absorbing inner core which reduces
fall arrest forces.
• Heavy-duty tubular outer jacket which serves as a backup lanyard and also as a protective sleeve.
Improves safety
• Unique warning flag which provides visual proof that a
lanyard has been involved in a fall and should be
removed from service.
• Reliable visual inspection. The integral red core becomes
visible if the outer jacket is damaged or worn, and unfit
for service.
Improved durability
The TEFLON®* hi-tech protective finish on the outer
tubular jacket prolongs the service life of the Miller
Manyard®. The Miller Manyard® unique warning flag.
The products are CE-certified and conform to
EN 354 and EN 355
ME82 - Manyard® complete
with 2 galvanised connectors
(ML00)
Art. No.
10 053 17
10 053 18
Length
1.5m
2.0m
ME86 - Manyard® complete
with 63mm scaffold hook
and galvanised connector
Art. No.
10 053 24
10 053 25
Length
1.5m
2.0m
ME83 - Manyard® complete
with snap hook and
galvanised connector
Art. No.
10 053 26
10 053 27
Length
1.5m
2.0m
Miller Barracuda™ Scaffolding Lanyard
The ultimate fall protection solution for scaffolders
- Double gripping
- Conforms to EN 355 and EN 795b.
FALL PROTECTION
Barracuda™ Scaffolding
Manyard®
A 1.75m elasticated Manyard® with
integrated shock absorber, vertical
scaffold clamp and screwgate
karabiner. The elasticated lanyard
reduces tripping and snagging
hazards. TEFLON®* hi-tech protective
finish helps to prolong the service
life of the unit.
Adjustable Barracuda™
Scaffolding Lanyard
Barracuda™ Scaffolding
Lanyard
An adjustable 1.2m rope lanyard
with shock absorber, vertical scaffold
clamp and screwgate karabiner for
restraint and fall arrest.
A 1.75m fall arrest rope
lanyard with shock
absorber, vertical scaffold clamp and
screwgate karabiner.
Art. No.
Art. No.
Art. No.
10 104 70
10 086 71
10 101 41
*TEFLON® is a registered trademark of DuPont for its brand of fabric protector. Only DuPont makes TEFLON®. New added value
from Miller® by Sperian for sustained performance and easy care.
180
LANYARDS
Restraint Lanyards (polyamide rope - 12 mm)
Durable, lightweight components for maximum safety and comfort
A restraint lanyard is used to restrict the worker’s movement to
prevent him reaching a location where a fall hazard exists.
Art. No.
MD00
Art. No.
10 028 81
MD06
Reference
Length (m)
Connector
Connector
10 028 81
MD00
1
Loop
ML00
10 028 82
MD00
2
Loop
ML00
10 028 83
MD02
1
ML00
ML00
10 028 84
MD02
2
ML00
ML00
10 047 11
MD02
1,5
ML00
ML00
10 028 87
MD06
0,35
Loop
2 x MLOO
ME52
Art. No.
Art. No.
10 028 87
Shock-absorbing Lanyards
ME05
Art. No.
10 029 03
Art. No.
Order No
Length (m)
10 029 01
ME00
1,8
10 029 03
ME02
10 029 04
Art. No.
100% tie off
12mm Rope
10 045 90
23mm Webbing
10 029 07
Connector
Connector
•
None
None
2
•
ML00
ML00
ME03
2
•
ML06
ML06
10 045 90
ME05*
2
•
ML00
2 x 63 mm Scaffold Hook
10 052 79
ME06
1,5
•
ML00
63 mm Scaffold Hook
10 045 79
ME06
2
•
ML00
63 mm Scaffold Hook
10 029 06
ME51
2
•
ML00
63 mm aluminium Scaffold Hook
10 029 07
ME52
2
•
ML00
ML00
10 032 16
AMORSTOP
1,5
•
ML00
ML00
10 045 78
ME53
2
•
ML00
22 mm Snap Hook
10 052 90
ME53
1,5
•
ML00
22 mm Snap Hook
10 045 91
ME54
2
•
ML00
50 mm Scaffold Hook
10 052 78
ME54
1,5
•
ML00
50 mm Scaffold Hook
10 032 15
AMORSTOP
2
•
ML00
63 mm Scaffold Hook
10 032 20
AMORSTOP
1,3
•
None
None
FALL PROTECTION
ME02
181
MILLER PERSONAL FALL LIMITERS
Increased Versatility
Compact and lightweight, the Miller PFLs can be attached
directly to the harness D-ring and used like a shockabsorbing lanyard. Most units are longer than traditional
lanyards, therefore offering greater manoeuvrability.
Miller Personal Fall Limiters
The cost-effective alternative
to shock-absorbing lanyards
Enhanced Safety
In contrast to shock-absorbing lanyards, a PFL eliminates
the need for an extended fall distance clearance, as the
fall is arrested within centimetres. This minimises the risk
and makes rescue easier. The retractable lifeline reduces
the risk of tripping or snagging.
Greater Cost-Effectiveness
Competitively priced, the longer service life of the Miller
PFLs make them an economical alternative to shock
absorbing lanyards. Ideal for low-level work. The Miller
Range of Personal Fall Arresters are self-retracting blocks
with a quick-activating braking system that limits a free fall
to centimetres, with reduced fall arrest forces.
NEW
Miller Turbo Lite
Compact and lightweight.
The first affordable alternative to shock-absorbing lanyards.
• Adapted to all situation when working with low space clearance
• Can be used in Fall Factor 2 (below the back D ring and not
lower than foot level)
• Can be used on both side
• Built-in web load indicator identifies when the unit needs to be
removed from services
• Quick activating Patent Pending Braking System
• Compact and lightweight (0,86 kg) provides 2m working capacity
lifeline
• Engineered webbing for greater abrasion resistance and long
service life (vectran / polyester webbing)
• Lightweight, high-strength, impact-resistant nylon housing for
maximum durability
• Built-in swivel prevents lifeline from twisting
• No annual factory recertification required
10 180 15
Standards : EN 360 (retractable type fall arresters)
ANSI Z359.1, ANSI A10.32, OSHA 1926.502.
Art. No.
10
10
10
10
180
180
180
179
15
13
14
00
Description
TURBOLITE WEB WSA 2m C/W 2 TWISTLOCK
TURBOLITE WEB WSA 2m C/W TWISTLOCK+SCAF
TURBOLITE WEB WSA 2m C/W Scafhook+TWIST
TURBOLITE WEB WSA 2m Twist Alu+Snap Alu
10 180 13
Unit connector
Steel twistlock carabiner (opeaing : 18mm)
Steel twistlock carabiner (opening : 18mm)
Aluminium scaff hook (opening: 65mm)
Aluminium twistlock carabiner (opening : 16mm)
10 180 14
10 179 00
Lanyard end
Steel twistlock carabiner (opening : 18mm)
Aluminiumscaff hook (opening: 65mm)
Steel twistlock carabiner (opening : 18mm)
Aluminium snap hook (opening: 21mm)
FALL PROTECTION
Miller Falcon 6 m
Webbing retractable lifeline
• Increased Safety
• Increased Service Life
• Casing comes with a lifetime guarantee
• Available in 4 versions
6 m Miller Falcon lifeline + swivel
Art. No.
10
10
10
10
167
167
167
167
93
94
95
96
Connectors
none
63 mm auto karabiner + karabiner with alu screw
2 karabiners with aluminium screws
karabiner with aluminium screw + 22 mm auto karabiner
10 167 93
182
10 167 94
10 167 95
10 167 96
MILLER PERSONAL FALL LIMITERS
Miller Scorpion™
Unique snap-hook design for easy attachment
to harness D-ring
Extremely robust and lightweight, the
Scorpion™ PFL features a fall indicator,
corrosion-resistant internal parts, stainless
steel / aluminium body and high impact
polymer cover. Weight 1.6kg
Lifeline Material: TEFLON®* treated polyamide webbing.
Art. No.
10 085 87
10 085 88
10 085 94
Description
Miller Scorpion™ PFL with screwgate karabiner and swivel snap hook
Miller Scorpion™ PFL with swivel scaff hook (63mm) and snap hook (22mm)
Miller Scorpion™ PFL with swivel scaff hook (63mm) and snap hook (22mm
Length
2.7 m
2.8 m
2.8 m
Miller Minilite™
Fall Limiter
The lightweight, palm-sized
self-retracting fall arrest block
with a quick activating braking
system that limits freefall
to centimetres.
The 3 metre
retractable webbing allows
greater freedom of movement.
The high-impact composite
housing and corrosion
resistant interior increase
the product durability
Art. No.
10 061 00
10 061 01
10 061 02
Connectors
MI10 - Minilite 3,1 with 1 connector ML00 and 1 swivel snap hook 22 mm
MI11 - Minilite 3,1 with 1 snap hoop 22 mm and 1 swivel scaffold hook 50 mm
MI12 - Minilite 3,1 m with 1 connector ML00 and 1 snap hook 22 mm
With a working capacity of 2.5m, the MI20 features an
integral
shock-absorber to reduce the impact force of a fall, and
comes with two screw karabiners.
Art. No.
10 028 71
10 030 59
Length
2,5 m
1,5 m
FALL PROTECTION
MI20 Inertia reel fall arrester
*TEFLON® is a registered trademark of DuPont for its brand of fabric protector. Only DuPont makes TEFLON®
183
MILLER FALL ARREST BLOCKS
Miller Fall Arrest Blocks
Safety and comfort with freedom to move
Miller® by Sperian offers the most comprehensive range of fall arrest blocks including robust lightweight composite blocks
and heavy-duty fall arrest and rescue models with metallic housing.
Choice of lifeline materials: webbing, stainless steel, and galvanised steel.
Lifetime housing guarantee
The nearly indestructible, high impact-resistant nylon housing withstands the harsh rigours of the toughest applications.
Smooth, round edges increase durability.
10 124 10
10 123 92
Miller Black Rhino Self Retracting Lifelines
• The smallest and lightest 3-metre cable lifeline on the market.
• The robust housing and corrosion resistant cable and internal components are designed to endure the daily rigours
of harsh environments. Meets all applicable global industry standards.
• Supplied with load indicator.
Art. No.
10 124 10
10 123 92
Description
Black Rhino with swivel screwgate karabiner and swivel snap hook (22mm)
Black Rhino with swivel scaffold hook (63mm) and swivel snap hook (22mm)
Miller Mightylite™
Self-Retracting Lifelines
Heavy-duty performance from a compact and easy-to-use block that features
pressed steel housing, stainless steel springs and a fall indicator.
Supplied with a swivel snap hook.
MightyLite - Steel Housing Cable
FALL PROTECTION
Art. No
184
10
10
10
10
10
10
10
10
10
10
10
10
028
028
045
028
045
045
045
045
045
045
045
045
20
27
71
28
73
92
72
93
74
94
75
95
Reference
MI50
MI70
MI54
MI71
MI55
MI55
MI56
MI56
MI57
MI57
MI58
MI58
Length
(m)
6,2
6,2
10
15,5
15
15
20
20
30
30
40
40
Weight
(kg)
4
3,5
5,6
9,4
9,5
9,5
14,9
14,9
19
19
23,6
23,6
Stainless steel
ø 4.8mm
Galvanised wire Webbing
ø 4.8mm
25mm
•
•
•
•
•
•
•
•
•
•
•
•
Handle
•
•
•
•
•
•
•
•
10 045 73
10 028 27
MILLER FALL ARREST BLOCKS
6.2 and 10m model
*If the housing of the unit
cracks or is damaged under
normal, non-abusive working
conditions, Miller will replace
the damaged housing
component(s) free of charge
15 and 20m model
Miller Falcon™ Self-Retracting Lifelines
The safest, most robust and comprehensive range of composite retractable lifelines on the market.
Greater Cost Savings
No need for an annual factory recertification : An authorised competent person can annually inspect the Falcon SRL
and, if it fails, return it to the factory or to a Bacou-Dalloz authorised service centre. The result is reduced down
time and lower cost of ownership.
Enhanced Safety
The quick-activating braking mechanism stops a fall within centimetres allowing for a quick and safe rescue. A highlyvisible load indicator identifies that the unit should be removed from service.
Greater Comfort of Use
Lightweight, with a built-in handle on the 15 and 20 metre units, the unit is easy to handle and transport to/from
jobsites.
The unique side payout design reduces wear on the entry guide and cable and ensures a smooth operation with less
resistance.
Tested and Approved for Horizontal Applications when used with the appropriate manufacturer recommended
equipment. Contact Customer Service for additionnal information.
Key Product : Additional models are available upon request.
i.e stainless steel snap hook versions (Ref.: 10 122 61-62-63)
Art. No.
10
10
10
10
10
10
10
10
117
117
117
117
117
117
117
117
28
29
42
43
46
47
50
51
Length
(m)
6,2
6,2
10
10
15
15
20
20
Weight
(kg)
4,1
4,1
5
5
6,7
6,7
7,7
7,7
Stainless steel
Ø 4.8mm
Galvanised wire
Ø 4.8mm
•
•
Webbing
Handle
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Dimensions
255 x 213 x 101
255 x 213 x 101
255 x 213 x 101
255 x 213 x 101
342 x 246 x 101
342 x 246 x 101
342 x 246 x 101
342 x 246 x 101
FALL PROTECTION
Standards : CE – The products are CE certified and conform to EN360.
185
MILLER FALL ARREST KITS
Miller Fall Arrest Kits
All your fall protection equipment available in a ready-to-go kit
NEW
Construction Back-Pack Kit
(Kit 11)
The number one selling kit from
Miller! 1 or 2-point DuraFlex®
elasticated harness, rear anchorage
and 2m elasticated Miller Manyard®
with 63mm steel scaffold hook, both
with TEFLON® finish. Includes free
back-pack.
Art. No.
10 068 83
10 078 42
Harness
MA02
MA04
Barracuda Back-Pack Kit
TurboLite Kit
Ideal for low-level work ! 1-pt
DuraFlex elasticated harness with
TEFLON® finish with lightweight
Miller TurboLite (10 180 13)
Art. No.
10 281 34
Miller Accessories
Miller Relief Step
Designed to alleviate the effects of
suspension trauma on a worker who has
fallen in his harness. The Relief Step can be
attached to any brand of harness and is
easily deployed for a short term solution
to the worker’s safety and comfort.
Art. No.
FALL PROTECTION
11 002 11
Tool Bandit
When performing jobs at heights, workers can sometimes lose their grip.
Tools are often dropped, reducing on-the-job efficiencies and potentially
causing serious injuries to workers below. The Tool Bandit can be fixed to
the worker’s belt or wrist and is designed to secure the tool whilst still
allowing enough freedom of movement to get on with the task.
Art. No.
11 002 10
10 124 90
10 124 91
186
Description
Display box of 12 pairs in clamshells
Description
Display box with 12 Bandit Lanyard Tool holders in clamshells
Display box with 36 Bandit Lanyard Tool holders in clamshells
Bulk bag of 36 WristBandit Tool Holders
The ultimate solution for safety and
comfort for scaffolders, combining a
1-point DuraFlex elasticated harness
(MA02) and the Adjustable
Barracuda Scaffolding Lanyard
(Art.No 10 086 71)
Art. No.
10 086 71
ROPE AND WIRE FALL ARRESTERS
Rope and Wire Fall Arresters
Light, industry-proven, stainless steel automatic or manual fall arresters
No other supplier can match the proven performance and 20 year experience of Miller®
by Sperian in rope grabs and cable grabs - years which have resulted in simple design
and reliable lightweight products. In the event of a fall or slip, they lock onto the rope or
cable, arresting the fall immediately.The automatic grabs follow the worker without
assistance.
Application
Rope grabs and cable grabs prevent workers from falling during ascent or descent.The
range includes models for both vertical and horizontal applications.They are particularly
useful on sloping roofs where retractable lifelines may react too slowly.
Automatic and
manual rope grab
MF51 / MF52
MC03 Work
Positioning
Lanyard
• Suitable for vertical,
horizontal and
sloping applications.
• Suitable for 10/12
mm or 14/16 mm
rope.
• Automatic locking
for vertical use – the
rope glides freely
over the line without
manual intervention.
• Manual position for
horizontal work.The
user locks the grab
on the rope for
restraint purposes, and repositions
it manually along rope.
• MF52 supplied complete with 0.3m
lanyard and connector (ML00).
• Complies with EN353-2.
Ideal for those
who have to
work at height
in a safe and
supported
hands-free
position.
The lanyard is
fitted around
a supporting
structure and
then connected
to the side Drings on the
operator’s belt
or harness.
- Easy-to-use aluminium jaw type
length adjuster for progressive
one-handed adjustment
- Ø 16mm polyamide rope
- Supplied with karabiner and alloy
snap hook, 22mm opening.
10
10
10
10
076
028
076
028
40
75
18
76
Rope
10 mm / 12 mm
14 mm / 16 mm
10 mm / 12 mm + lanyard
14 mm / 16 mm + lanyard
Suitable for vertical,
horizontal and sloping
applications.
• Supplied with a
counterweight and
screwgate karabiner
• Complies with EN696
Kernmantel
rope
suitable for
10mm / 12mm
rope grabs
10
10
10
10
10
076
076
076
076
076
13
14
15
16
17
Twisted
polyamide rope
Length
suitable for
14mm / 16mm
rope grabs
10 m
10 028 91
20 m
10 028 92
30 m
10 028 93
10 028 94
40 m
10 028 95
50 m
Art. No.
10 028 78
10 028 79
10 028 80
Length
2m
3m
4m
Rocker Rope Lock
Versatile and lightweight fall
arrest system designed for technical rope access. Suitable for
10/12mm rope, it offers the following functions:
• Easy-to-use manual and automatic rope grab (EN353-2)
• Length adjuster for positioning lanyard (EN358)
• Tensioning device for horizontal lifeline
• And also a pulley blocking device
FALL PROTECTION
Art. No.
MH00
Anchorage Line
Art. No.
10 070 31
187
ANCHORAGE POINTS AND CONNECTORS
Anchorage Points and Connectors
A complete range of easy-to-install anchorage devices
for all applications
Miller® by Sperian boasts a complete range of anchorage points and
connectors - karabiners, safety hooks, girder grips - to ensure a
complete and reliable Miller fall protection solution. It also includes
the equipment and accessories to set up lifelines where quick
temporary overhead anchorage is required.
Anchorage Points
Possibly the most important aspect of a fall protection system, it is
important to select a reliable anchorage point to ensure full safety.
This should :
• have a static resistance > 10kN,
• be located at a safe distance above any lower obstacles,
• and, be as vertical as possible to the work station to avoid the
pendulum effect.
MJ00
MJ51
Webbing
anchorage sling
23 mm polyester
webbing.
Weight : 0.21kg.
Breaking strength :
>10kN.
Galvanised Steel
Sling
6.3 mm galvanised
steel with protective
plastic sheath.
Opening: Ø 300mm
(250 x 250mm
square structure).
Weight: 0.28kg.
Breaking strength :
>15kN.
Art. No.
10
10
10
10
10
029
029
032
029
029
16
17
45
18
19
Length
0.6 m
0.8 m
1.0 m
1.2 m
1.5 m
Art. No.
10 028 97
MJ52
Length
1m
Beam Glide
Fully adjustable aluminium beam anchorage
device suitable for beams widths up to 360mm.
Breaking strength: 22kN. Weight: 1.4kg.
Conforms to EN 795b.
Art. No.
10 070 66
FALL PROTECTION
Miller Serpent Temporary
Horizontal Lifeline
The durable solution for
construction
• Durable braided rope with two
galvanised connectors.
• Maximum working length
12 metres.
• Fast and easy to install.
• Fixing to either permanent
anchorage points or temporary
webbing anchorage slings.
• For use by one person only.
• Supplied with two 1.5m webbing
anchorage slings.
• Complies to EN795b.
Art. No.
10 076 10
188
Miller MK00 Telescopic
Pole
• Light-weight, fibreglass
telescopic pole, 3 elements
• Compact for easy
transportation
• Retracted length : 2.6m
• Weight : 2.73kg
Art. No.
10 028 98
Extended Length
7.5m
Wire Girder Grip
Stainless Steel.
Weight : 0.42kg.
Breaking strength :
>20kN.
Art. No.
10 028 29
10 028 30
10 028 31
Opening
75 mm
100 mm
140 mm
MILLER CONNECTORS
MJ50 – Stainless steel
connector
Opening: Ø 150mm
(or 120 x 120mm square structure).
Weight: 1.27kg.
Breaking strength: >20kN.
Art. No.
MK01 Connector
• Easy-to-fit anchorage connector for
use with telescopic pole
• Large opening is ideal for anchorage
to girders, beams...
• For use in conjunction with an
anchorage line
10 028 96
Art. No.
10 028 99
Opening
150 mm
MK02 Scaffold Hook
• Easy-to-fit anchorage connector for use with telescopic pole
• Opening to suit scaffolding tubes
• For use in conjunction with an anchorage line
Art. No.
10 029 00
Opening
63 mm
ML03 – Twistlock karabiner
Art. No.
10 028 35
Opening
23mm
ML00/CS20– Screwgate karabiner
Galvanised connector with keylock.
Weight : 0.158kg.
Breaking strength : >22kN.
Art. No.
10 028 32
Opening
18mm
Alloy Screwgate Karabiner
Weight : 0.100Kg.
Breaking strength : >30kN.
Art. No.
10 128 33
Opening
24mm
GO60 Light Alloy Connector
With self locking gate and rope latch.
Weight : 0.245kg.
Breaking strength : >23kN.
Art. No.
10 043 18
FALL PROTECTION
Light alloy connector with keylock,
delivered in a mix of three colours.
Weight : 0.076kg.
Breaking strength : >28kN.
Opening
62mm
189
TITAN RANGE
Ensuring safety and compliance on the jobsite.
TITAN™ is a complete range of user-friendly fall protection products that meets industry and construction compliance
requirements. Standard products with some add-on features make the Titan™ line a cost-effective choice for fall
protection.
TITAN Harnesses
Lightweight, durable polyamide webbing for all day comfort and dependability
- Fully adjustable designs so one size fits all - Sub-pelvic strap keeps the wearer upright
- Sliding back D-ring for a comfortable fit - 45mm chest strap with metal buckle
Standards : All TITAN harnesses are CE Certified and conform to EN361 and, where necessary, EN358.
TITAN 1-point
harness
Rear anchorage.
TITAN 2-point
harness
Front and rear anchorage
(front webbing loops).
TITAN 1-point
harness with
positioning belt
Rear anchorage.
TITAN 2-point
harness with
positioning belt
Front and rear anchorage
(front webbing loops).
Art. No.
Art. No.
Art. No.
Art. No.
10 118 90
10 118 91
10 118 93
10 118 94
TITAN Work Positioning
FALL PROTECTION
Standards : All TITAN work positioning equipment is CE Certified and conforms EN354.
TITAN FPL Work
Positioning Lanyard
Adjustable 12mm polyamide
rope lanyard.
Length 1.8m.
TITAN Work Positioning Belt
Art. No.
10
10
10
10
190
082
082
082
082
85
86
87
88
Description
No connector
Loop and 20mm snap hook
Loop and twistlock karabiner
2 twistlock karabiners
Lightweight. 2 stainless steel side D-rings.
Art. No.
10 082 32
TITAN RANGE
TITAN Automatic Rope Grab
Standards : The TITAN Automatic Rope Grab is CE Certified and conforms to EN 353-2.
Automatically locks onto the rope in the event of a fall.
• Durable, corrosion-resistant, stainless steel construction.
• Lightweight, easy-to-use design with hands-free operation offers maximum freedom of movement.
• 0.3m lanyard and connector facilitates attachment to harness.
• Includes rope anchorage line.
Art. No.
10
10
10
10
10
10
10
113
113
113
111
117
111
111
44
45
46
90
00
91
92
Anchorage lines.
Diameter 12mm
10 m
20 m
30 m
Rope Grabs.
Diameter 12mm
10 m
15 m
20 m
30 m
TITAN Shock-Absorbing Lanyards
Standards : All TITAN shock-absorbing lanyards are CE Certified and conform to EN355
TITAN B1
Rope shock-absorbing lanyard. No
connector.
Rope shock-absorbing lanyard with
snap hook and screwgate karabiner.
Art. No.
Length
10 082 75
1.8m
Art. No.
10 082 76
Length
2.0m
TITAN C3
Rope shock-absorbing lanyard with
screwgate
karabiner and scaffold hook (63mm
opening).
Art. No.
10 082 81
Length
2.0m
TITAN A2
TITAN A3
TITAN Forked
Webbing shock
absorbing lanyard
with screwgate
karabiner and loop.
Webbing shock
absorbing lanyard
with screwgate
karabiner and
scaffold hook
(63mm).
Forked shockabsorbing webbing
lanyard with 2
scaffold hooks
(63mm) and
screwgate
karabiner.
Art. No.
10 143 30
Length
1.5m
Art. No.
10 134 30
Length
2m
Art. No.
10 134 31
FALL PROTECTION
TITAN B
Length
2m
191
TITAN RANGE
TITAN Restraint Lanyards
For use when no fall hazard exists
Standards : All TITAN restraint lanyards are CE Certified and conform to EN354.!
TITAN R14
TITAN F Restraint Lanyard
Adjustable 12mm polyamide rope
restraint lanyard, no connector.
12mm polyamide rope, no connector.
Art. No.
10 082 73
Length
1.8 m
TITAN CMS Personal Fall
FALL PROTECTION
Arrester
Ideal for low level work.
• Reduced fall clearance
requirements thanks
to a quick-activating braking
mechanism
• Integral shock-absorbing pack
reduces fall impact forces
• Supplied with or without
screwgate karabiners
• Supplied with or without
protective housing
• 50mm wide webbing lifeline
• 2.5m working capacity
Standards : The TITAN CMS
Personal Fall Arrester is CE
Certified and conforms to EN360.
Art. No.
10 083 29
10 083 32
10 083 34
192
Description
no housing, no connector
with housing, no connector
with housing, 2 karabiners
Art. No.
10 082 70
10 082 71
10 082 72
Length
1m
1.5 m
2m
TITAN Anchorage Sling
• 20mm polyamide webbing
.
Standards : The TITAN
Anchorage Sling is CE
Certified and conforms to
EN795.
Art. No.
10
10
10
10
10
083
083
083
083
083
60
61
62
63
64
Length:
0.6 m
0.8 m
1m
1.2 m
1.5 m
TITAN RANGE
TITAN Fall Protection Kits
Fall Protection made easy with these user-friendly kits designed for specific applications :
•TITAN 2-point harness with rear
and front anchorage (front webbing
loops)
•TITAN automatic rope grab
with 10m-anchorage line
and 30cm attachment lanyard
Art. No.
10 118 95
TITAN Work Positioning Kit
Not suitable for Fall Arrest! The
ideal solution for flat roof
maintenance, MEWPS…
•TITAN 1-point harness with rear
anchorage
•TITAN F 2m restraint lanyard
with 2 screwgate karabiners
•TITAN 2-point harness with work
positioning belt, front and rear
anchorage (front webbing loops)
•TITAN CMS personal fall arrester
with 2.5m webbing lifeline
•TITAN FPL adjustable work
positioning lanyard with 2 screwgate
karabiners
Art. No.
10 118 97
10 118 99
TITAN Construction Kit
TITAN Fall Arrest Kit
•TITAN 1-point harness with rear
anchorage
•TITAN B1 2m shock-absorbing
lanyard with 2 screwgate karabiners
Art. No.
10 118 96
Art. No.
•TITAN 1-point harness with rear
anchorage
•TITAN CMS personal fall arrester
with 2.5m webbing lifeline and
2 screwgate karabiners
Art. No.
10 118 98
TITAN Packaging
The TITAN kits are supplied in a highly
practical case for storing and protecting your
fall protection equipment after each use.
•Lightweight, resistant, waterproof soft
plastic casing.
•Quick-opening zip.
•Comfortable cloth handle for a better
grip and easy in-store display.
•Convenient side pocket for storing
instructions and other documents.
FALL PROTECTION
TITAN Roofers Kit
TITAN Restraint Kit
193
CONFINED SPACES
Both the Miller tripod and portable davit column, used in conjunction with the Miller fall arrest blocks and winches, form
the core of a stable and secure confined entry / rescue system. Suitable for use on manholes, tanks, hatches and other
below-ground work and confined spaces.
MN10 Miller Aluminium
Tripod
Easily installed by one person, the self-locking, fully
adjustable legs lock securely in place thanks to the
automatic pins. No chains are needed to secure the
feet, which greatly reduces the risk of tripping.
Two anchorage points. Supplied with one pulley.
Weight: 15kg
Complies with EN795(b)
Dimensions :
Fully extended:
Height: 2.1 m
Leg span: 1.5 m
Fully retracted:
Height: 1.4 m
Width: 0.4 m
Breaking strength: > 10 KN
Maximum safe working load: 136 kg
Art. No.
10 050 41
Height:
2.1m
FALL PROTECTION
MI65 MightEvac Fall Arrest
Block
194
With retrieval winch. Pressed steel housing and a
compact design for heavy duty performance. Easy-to-use
with rescue winch (up/down), gear ratio 5:1, fall
indicator. Complete with screwgate karabiner. Supplied
without brackets.
Complies with EN360
Art. No.
10
10
10
10
10
051
051
051
053
053
49
60
61
30
31
Description
Length:
Lifeline material: 4.8mm galvanised wire cable
Lifeline material: 4.8mm galvanised wire cable
Lifeline material: 4.8mm galvanised wire cable
Brackets for MightEvac / Tripod
Brackets for MightEvac / Tripod
15m
30m
40m
15m
30 & 40m
CONFINED SPACES
Tower Harness
Heavy-duty harness, designed for excellent comfort and support.
Particularly suitable for harsh-environments.
- 4-point harness with belt and sit harness function
- High-quality, resistant webbing for increased durability
- Wide, comfortable work-positioning belt prevents back injuries and
promotes productivity
- Padded leg straps for enhanced comfort during suspension work
- Back and shoulder pads
- Conforms to EN361, EN358 and EN813.
Art. No.
Size:
10 062 55
10 117 70
M/L
S
MN20 Manhandler Work
Winch
Lifeline material:
stainless steel
cable
Compact and
robust, the
Manhandler is both
a rescue and
material winch.
Easy operation,
mechanical
efficiency 5:1, with
overspeed braking
system and load
indicator. Integrated bracket for MN10
tripod. Complete with one pulley.
Maximum charge: 159kg
Art. No.
10 050 42
10 050 44
MN50 - POTEX Portable
pivoting davit column
Length:
20m
20m
Flat and swing sided with large diameter sheaves
that promote excellent efficiency. Includes screwgate
karabiner.
*included with MN10 Tripod and Manhandler.
Mounting plates:
Portable davit arm is available with a selection
of base mountings -attachments to suit
temporary/semi-permanent mobile working
environments. Please refer to the price list for
further information.
Pivoting uni-hoist system. Easy access to confined
spaces, integrated rescue winch 30m, adjustable legs to
fit most confined space entry
Complies with EN 795(b)
Art. No.
Art. No.
10 114 71
10 029 20
FALL PROTECTION
Miller Pulley*
195
MILLER TECHNICAL HARNESSES
Miller Technical Harnesses
Technical Harnesses for the Telecoms and Utilities market are vital tools for work at height. Specific features such as
rotating belts, padded leg straps and work-positioning belts have been designed to promote peak performance by
enhancing the operator’s comfort and freedom of movement at the work site, and so increasing user confidence and
productivity.
Elastokuik Comfort Harness
Ideal for work on telecom poles and pylons, this harness offers full
freedom of movement for access and excellent support for work
positioning and extended reach.
- Heavy-duty 3-point harness with work positioning belt.
- Rear, front and side anchorage (front anchorage loops)
- Rotating work-positioning belt offers excellent freedom of movement
and extended reach.
- Stretchable shoulder straps move with the worker to enhance
productivity through increased comfort and greater flexibility
- Comfortable back-padding for supported hands-free work-positioning
- Back pad in cordura
- Easy to fit with automatic buckles
- Conforms to EN361 and EN358
Art. No.
Size:
10 030 23
10 030 22
10 030 24
S
M/L
XL
RM Harness
The perfect compromise between freedom of movement for access and
excellent support for suspension.
4-point full body harness with work positioning belt and sit harness
function.
- Rear and sternal anchorage for fall arrest, ventral anchorage loops
(access and suspension) and side anchorage (work-positioning).
- Patented elasticated webbing on the shoulder straps stretches with the
user for greater freedom of movement and comfort with reduced
fatigue.
- Lightweight and easy-to-fit with quick-fixing automatic buckles
- Greater productivity thanks to the padded belt and leg straps that
provide excellent support for work in suspension.
- Conforms to EN361 and EN358
Art. No.
FALL PROTECTION
10 034 39
10 034 38
Technical Fall Arrest Lanyards
Forked Shock-Absorbing Lanyard
2m webbing lanyard with shock-absorber.
- Forked lanyard for 100% tie-off: ideal for ascension of a tower
or ladder.
- Compact, light-weight shock-absorber increases ease and comfort of use.
Art. No.
10 029 02
10 045 90
196
Size:
M/L
S
Connectors
3 Screwgate karabiners (18mm opening)
Screwgate karabiner and 2 scaff hooks (63mm opening)
TECHNICAL ACCESS & RESCUE
Rope Access
Miller ROPAX harness
This new full body harness for rope access and rescue
combines excellent suspension comfort with freedom of
movement and increased productivity
The new triangular suspension position distributes the loads from the
attachment points to the larger muscle groups to minimise discomfort and
suspension trauma.
An additional webbing sling positions the ascender tight against the chest to
facilitate ascension.
2 webbing options
• DualTech webbing with shape
retention memory
• Resistant black polyester webbing
Adjustable Webbing Sling
Designed to vertically position the
ascender tight the harness
Web Finials
Clip-on design safely organises
webbing after proper adjustment
V Shape
The V Shape of the shoulder staps
has been redesigned to prevent the
straos fromm gigging into the neck
and causing irritation
Extra-Wide Padded Belt
Provides excellent lumber support
and comfort
Perfect Fit
Adjustment webbing strzps between
the leg straps and the belt allow for
an exact fit
Gear Loops
3 large, easily accessible gear loops
accomodate all tools and accessories
Foldable Side D-rings
Padded Leg straps
For increased comfort
L/XL
10 144 34
10 144 32
10 151 10
10 144 35
10 144 33
10 151 11
Description
Manual buckles + Black polyester webbing
Automatic buckles + Black polyester webbing
Automatic buckles + Dualtech webbing with shape retention memory
ErgoSoft Dorsal Pad
Tranversal Pad
Designed to protect the back and facilitate harness
donning
Used in conjunction with dorsal pad, it allows the user
to adopt a semi-reclined work position without
straining the abdominals
Art. No.
Art. No.
10 152 05
10 152 06
FALL PROTECTION
S/M
“Left” & “Right tags
Facilitate harness donning
197
TECHNICAL ACCESS & RESCUE
Descenders, Ascenders & Fall Arresters
Manual vs Automatic Descenders
Miller-Troll manual descenders are designed for rope access work where the worker manually controls his descent.
For maximum safety, the manual descenders feature an emergency braking system. When blocked on the rope the
manual descender can be used to position and hold the operator at a particular point.
Miller-Troll automatic descenders are intended for rescue situations at height. (For example lowering an injured person
from a crane, ski-lift etc)
Manual Descenders
Indy Descender
Lightweight and easy-to-use.
Descent is activated and controlled through pressure onto the handle.
Anti-panic auto-braking system.
The operator’s safety is guaranteed thanks to a maximum descent speed: 2 m/s.
Suitable for 10-13mm rope.
Complies to EN341 Class A.
Weight: 0.49kg.
Art. No.
10 042 53
ProALLP Tech Descender
This new generation descent device offers maximum control and versatility within the
areas of technical access, rescue and intervention.
Designed to hold up to two people (max. 250kg) in a rescue scenario.
Option of both screw and auto-lock controlled-rate rope descent.
Includes ascender, belay brake, tensioned line brake and hauling system brake function.
Suitable for 10-13mm kernmantel rope. Conforms to prEN12841-c.
Weight: 0.54kg.
Art. No.
10 070 57
FALL PROTECTION
Rocker Rope Lock
Versatile and lightweight fall arrest system designed for use in conjunction with a manual
descender for technical rope access or rescue. Compact and easy-to-use as :
Manual and automatic rope grab (EN353-2).
Length adjuster for positioning lanyard (EN358).
Tensioning device for horizontal lifeline.
Pulley blocking device.
Locking catch can be activated to hold the Rocker in position on the rope.
Suitable for 10/12mm rope.
Weight: 0.17 kg.
Art. No.
10 070 31
198
TECHNICAL ACCESS & RESCUE
Automatic Self Descenders
RG9 Automatic Self Descender
The Compact RG9 is an easy-to-use automatic descent
device designed for a safe and controlled self-rescue.
Maximum descent height: 65m.
Controlled descent speed: 0.8m / second.
Complies to EN341.
Supplied with GO60 scaffold hook, opening 60mm.
Weight: 1.24kg.
Order rope separately for factory fitting
Art. No.
10 042 55
RG9 + rope kit
10
10
10
10
10
10
10
10
10
10
10
163
163
163
163
163
163
163
163
163
163
163
81
80
79
78
77
76
75
74
73
72
71
Length (m)
15
20
25
30
35
40
45
50
55
60
65
Ascenders
Ideally used in conjunction
with a foot-loop, the
manual ascender is a
lightweight alloy handle
that enables
the operator to ascend a
fixed rope.
The ascenders are
designed to connect easily
onto the rope with one
hand with comfortable and
efficient grip for improved
climbing control.
For rope diameters 1013mm.
Complies to EN567.
Weight 0.21kg.
Art. No.
10 070 41
10 073 93
Description
Right-hand ascender
Left hand ascender*
Cam-Clean
Ascender
Used in conjunction with
the rope ascender, is a
chest ascender designed to
hold the operator in a
comfortable upright
position.
Increased safety with an
anti-return system.
Complies to EN567.
Weight: 0.16kg.
Shorco Sling
and Foot Loop
Set
Used in
conjunction with
the Rope
Ascender and
Cam-Clean, the
Shorco Sling and
Footloop set
allows a fixed
rope to be
climbed by using
the Foot Lock
Technique.
Art. No.
Art. No.
10 042 54
10 101 68
FALL PROTECTION
Rope
Ascender
199
TECHNICAL ACCESS & RESCUE
Accessories
Cowstail Sling
Rope Protector
PVC reinforced rope protector. Designed
to protect the rope against abrasion and
cutting eg on buildings or rock edges.
Easy-to-fit with velcro seam.
Art. No.
Sling with reinforced loops at each end.
Suitable for connecting different devices
within an access or rescue system.
Art. No.
10 070 59
10 070 58
10 102 14
Length:
30cm
60cm
Climbers Helmet
Polypropylene climbers helmet with fully adjustable, comfortable skull webbing and
chin strap. A cotton lining on the skull webbing and good air circulation reduces
the build-up of moisture.
Fitted with attachment point for head torch.
Conforms to EN397. Weight: 410g.
Art. No.
10 070 48
10 101 77
Colour
Red
White
FALL PROTECTION
Industrial Climbers Seat
For use in conjunction
with a suitable safety
harness, the detachable
industrial climbers seat
offers a comfortable
supported position for the
operator during prolonged
periods suspended at
height.
Padded seat with
waterproof,
abrasion-resistant
pvc coated nylon
covering.
Supplied with two
connectors.
Adjustable straps for perfect fit.
Complete with convenient ring
attachments for accessories.
Art. No.
10 070 56
200
RG9 Rescue Kit
Ready-to-use rescue kit.
Suitable for lowering a
casualty unaccompanied
to the ground or for self
rescue.
This kit complies to
EN341 and contains:
RG9 automatic self
descender - maximum
descent speed 0.8m/s.
20m rope with karabiner.
Anchorage sling (1.2 m).
Practical and waterproof
storage bag.
Art. No.
10 060 27
TREE PRUNING
NEW
Morpho
New generation tree surgeon’s leg loop belt
Removable bow shackles
Attachment bridge with a cord line and ring for a great lateral mobility
Leg-loop ring
Integrated plate for the chainsaw snap hook
Cambered side buckles
Integrated saw attachments
Tool carrier with dedicated slots
Ergonomic leg-loops
3 PATENTED INNOVATIONS
Self-adjustable triangulation: Automatic distribution of the leg-loop / belt loads and automatic back tilt adjustment
Automatic belt and leg-loop buckles with anti-slip system
Ergonomic backrest with an integrated breathable system
Models delivered with 30-cm attachment bridge and ring
Art. No.
Self adjustable triangulation
10
10
10
10
168
168
168
175
24
25
26
92
Descriptions
Morpho belt Size 1
Morpho belt Size 2
Morpho belt Size 3
Spare 18-cm triangulation
Art. No.
10 175 92
Descriptions
FALL PROTECTION
Standards : Complies with CE standards:
-EN 358:Work-positioning belt
-EN 813: Sit belt
Spare 18-cm triangulation
201
TREE PRUNING
Butterfly II Belt
Tree-pruning belt with padded belt and removable leg straps.
Replaceable front anchorage point for climbing line.
Safe, fold-away side D-rings for positioning lanyard.
Conforms to EN358 and EN813.
Practical rings and loops for accessories.
Net weight: 1.690kg (S), 1.760kg (M/L)
Art. No.
10 117 01
10 117 02
10 136 41
Size:
(S: 76 to 118cm)
(M/L: 86 to 128cm)
(XL: 96 to 138cm)
Dragonfly II Belt
Tree-pruning belt with padded belt and removable rigid seat strap.
Replaceable front anchorage point for climbing line.
Safe, fold-away side D-rings for positioning lanyard.
Addition of adjustable buckles on the seat strap to adjust the back tilt.
Conforms to EN358 and EN813. Practical rings and loops for
accessories.
Net weight: 2.10 kg (S), 2.260kg (M/L)
Art. No.
10 166 81
10 166 82
10 166 83
Size:
(S: 76 to 118cm)
(M/L: 86 to 128cm)
(XL: 96 to 138cm)
Butterfly II Harness
AT LAST A SOLUTION TO EN361
Offering all the advantages of the Buttefly II belt this harness incorporates shoulder
straps and a dorsal anchorage point. The shoulder straps distribute the weight and
hold the harness in place when carrying a chainsaw.
Conforms to EN361, EN358 and EN813
Art. No.
10 137 24
10 137 25
10 137 26
Colour
S
M/L
XL
FALL PROTECTION
Dragonfly Harness
202
Offering all the advantages of the Dragonfly belt this harness incorporates shoulder
straps and a dorsal anchorage point. The shoulder straps distribute the weight and
hold the harness in place when carrying a chainsaw.
Conforms to EN361, EN358 and EN813
Art. No.
10 137 27
10 137 28
10 137 29
Colour
S
M/L
XL
ARBORICULTURE
Pair of bow shackles
Art. No.
10 122 31
Snap hook
Lightweight aluminium karabiner - Opening 60mm
For a quick and easy attachment of the chainsaw.
Art. No.
10 117 11
Attachment Bridge
With sliding anchorage point, allowing a great freedom
of movement, preventing the belt from rotating around
the waist and eliminating pressure on the hips.
Conforms to EN358 when fitted to the Butterfly II or
Dragonfly.
10 117 05
10 117 06
10 122 32
Length:
25cm
30cm
35cm
Aluminium Ring
Ring for attachment bridge
Chainsaw lanyard
A chainsaw can be secured to the lanyard, allowing
the chainsaw to be attached to the belt more easily.
Breaking strenght : 90 kgs.
Art. No.
Art. No.
10 122 30
10 164 90
FALL PROTECTION
Art. No.
203
ARBORICULTURE
Miller Full Body Harnesses
Designed for comfort and safety
Commonly used in conjunction with a climbing line, spikes and a work-positioning lanyard, the full body harnesses are
suitable for heavier tree-pruning operations, for example when using a chainsaw.
The climber is positioned against the trunk and is not required to move around the tree.
Shoulder straps evenly distribute the weight of the tools (e.g. chainsaw) through the harness.
The rigid seat strap provides a comfortable and safer position during work in suspension from the climbing line.
The wide, padded belt is used in conjunction with the positioning lanyard around the tree-trunk.
Green Belt
2-point positioning belt, with rigid seat strap and removable shoulder straps.
Adjustable sternal anchorage for climbing line
Side D-rings for positioning lanyard
Removable shoulder straps depending on task requirements
Durable 44mm polyamide webbing
Practical loops for karabiners
Conforms to EN 358
Net weight: 2.57kg
Art. No.
10 033 14
Art. No.
Green Belt Chainsaw Karabiner
10 030 16
10 151 92
Size:
Standard
XL
Tree-Pruning Harness
3-point full body harness with positioning belt and seat strap.
Rear anchorage for fall arrest
Sternal anchorage for climbing line
Side D-rings for positioning lanyard
Automatic buckle on the belt for quick and easy adjustment
Durable 44mm polyamide webbing
Practical loops for karabiners
Conforms to EN 358 and EN 361
Net weight: 1.76kg
Art. No.
Art. No.
FALL PROTECTION
10 029 65
Tree-Surgeon Kit
Contains:
Tree-Pruning Harness
Chainsaw Karabiner
Work-positioning lanyard
Set of 1-spike gaffs
Complete climbing line with length adjuster
Art. No.
10 032 79
10 032 78
204
Tree-Pruning Harness Chainsaw Karabiner
Length:
30m
20m
10 029 27
ARBORICULTURE
Miller Positioning Lanyards
Reglex 3000 - Reinforced lanyard
Suitable for tree-pruning and ornamental pruning.
• Easy-to-use, reinforced work positioning lanyard
• Ø 12.5mm flexible polyamide rope with steel core provides some
protection against chainsaw damage
• Stainless steel cam-type length adjuster for easy, progressive onehanded adjustment
• Supplied with karabiner and alloy snap hook, 22mm opening
• Static strength : >1500 daN
• Conforms to EN358
• Net weight: 1.8kg
Art. No.
10 031 24
Length:
4m
Reglex Machoire
Suitable for tree felling. The tree-surgeon uses the lanyard in
conjunction with spike gaffs to climb up the tree-trunk.
• Easy-to-use, reinforced work positioning lanyard with stainless
steel jaw type length adjuster for progressive one-handed
adjustment without jolts
• Ø 14mm semi-rigid polypropylene and steel rope provides some
protection against chainsaw damage
• Supplied with karabiner and alloy snap hook, 22mm opening
• Static strength: > 1500 daN
• Conforms to EN358
• Net weight: 1.61kg
Art. No.
10 030 99
10 031 00
10 031 01
Length:
3m
4m
5m
NEW
Reinforced Rocker positioning lanyard
Work positioning lanyard in ‘Amazon’ nylon rope with a Ø 7 mm
steel core.
• Supplied with an aluminium ROCKER rope adjuster with a keylock
connector and a snap hook. The length of the lanyard can be easily
adjusted without having to manually handle the ROCKER. Simply
by pulling upwards on the rope you can release the adjuster and
increase the length. To shorten the lanyard, pull the rope through
the ROCKER.
• The bright red colour offers better visibility and safety. Conforms
to EN358.
10 140 21
10 140 22
10 140 23
Length:
3m
4m
5m
Miller Climbing Spikes
Climbing Spikes
Designed for support when climbing the trunk of a tree
Increased comfort:
The protective climbing pad with high-density foam lining
provides a high level of comfort against the shin
Ergonomic design:
The ergonomic design of the aluminium leg shank is adapted
to the shape of the tibia and ankle
A secure hold:
The specific shape and durability of the stainless steel gaff offer
a reliable and secure support
Excellent freedom of movement:
Lightweight materials combined with an ergonomic design
facilitate the tree climbing
1 pair complete with
protective sheaths and Allen
key (for length adjustment)
Art. No.
10 144 91
FALL PROTECTION
Art. No.
205
HEARING PROTECTION
Ref.
206
10 001 07
10 002 40
10 002 41
10 002 42
10 002 43
10 002 45
10 002 46
10 002 47
10 002 48
10 002 49
10 002 50
10 002 51
10 003 63
10 003 64
10 003 65
10 050 73
10 050 74
10 052 92
10 053 28
10 053 29
10 058 50
10 058 52
10 059 52
10 059 80
10 060 80
10 060 81
10 061 86
10 061 87
10 062 02
10 062 03
10 071 92
10 071 93
10 080 00
10 103 74
10 103 75
10 103 76
10 104 21
10 106 31
10 106 32
10 109 22
10 109 23
10 109 24
10 109 25
10 109 28
10 109 29
10 109 70
10 109 74
10 109 75
10 109 76
10 111 42
10 111 43
10 111 45
10 111 46
10 111 70
10 112 34
10 112 35
10 112 36
10 112 37
10 112 38
10 112 3f9
10 112 62
10 112 64
10 112 81
10 112 82
10 116 00
10 119 94
10 119 95
10 119 96
10 119 97
10 119 98
10 119 98
10 119 98
Description
Bilsom® 303
Adapters
Adapters
Adapters
Adapters
Adapters
Adapters
Adapters
Adapters
Adapters
Adapters
Belt Case
Audiometric Cabin
COOL II Pads
COOL II Pads
Bilsom® 303
Bilsom® 303
Adapters Protector 300/600/650, Sofop oceanic
Clarity® 656
Clarity® 656
Leight® Source 100 for Bilsom 303 earplugs
Leight® Source 100 for Bilsom 303 earplugs
PerCap®
PerCap®
Hygiene Kits
Hygiene Kits
Leight® Source 400 Earplug Dispenser
Leight® Source 400 Earplug Dispenser
Leight® Source 400 Earplug Dispenser
Leight® Source 400 Earplug Dispenser
Bilsom® 303
Bilsom® 303
Hygiene Kit
Electo®
Radio
Impact™ Headband Earmuff
Mach™ 1
Electo®
Impact™ Helmet Earmuff
Leightning® Headband Earmuffs
Leightning® Headband Earmuffs
Leightning® Headband Earmuffs
Viking™
Thunder® Headband Earmuffs
Thunder® Headband Earmuffs
Thunder® Headband Earmuffs
Hygiene Kits
Hygiene Kits
Hygiene Kits
Clarity™ Headband Earmuffs
Clarity™ Folding Earmuff
Clarity™ Headband Earmuffs
Clarity™ Headband Earmuffs
Viking™
Fusion™ Detectable
Fusion™ Detectable
Matrix™
Matrix™
Matrix™
SmartFit®
Clarity™ Helmet Earmuffs
Clarity™ Helmet Earmuffs
Fusion®
Fusion®
Thunder® Folding Earmuff
Leightning® Neckband Earmuffs
Leightning® Neckband Earmuffs
Leightning® Neckband Earmuffs
Leightning® Folding Earmuffs
Hygiene Kits
Hygiene Kits
Hygiene Kits
page
9
23
23
23
23
23
23
23
23
23
23
23
24
24
24
9
9
23
12
12
10
10
15
15
20
20
10
10
10
10
9
9
21
22
22
21
19
22
21
16
16
16
19
18
18
18
18
18
18
20
20
20
20
19
13
13
9
9
9
11
20
20
11
11
18
16
16
16
16
17
19
23
Ref.
10 119 99
10 119 99
10 120 00
10 120 00
10 120 00
10 125 20
10 125 21
10 125 22
10 125 33
10 125 34
10 125 39
10 125 41
10 127 20
10 127 21
10 127 22
10 127 23
10 129 11
10 130 40
10 130 41
10 130 42
10 130 45
10 130 46
10 130 47
10 130 48
10 134 60
10 134 61
10 135 30
10 139 41
10 139 42
10 150 21
10 152 10
10 152 80
10 152 80
10 155 60
10 155 61
10 155 63
10 158 20
10 167 30
10 168 70
10 168 71
10 172 91
10 172 92
10 172 93
10 172 94
10 175 73
10 175 74
10 178 00
33 011 05
33 011 06
33 011 09
33 011 20
33 011 21
33 011 30
33 011 61
33 011 65
33 011 67
33 011 70
33 011 72
33 011 81
33 011 83
33 012 61
33 012 71
33 012 72
33 012 73
33 012 75
33 012 79
33 012 80
33 012 81
33 012 82
33 021 01
VERIPRO
Description
Hygiene Kits
Hygiene Kits
Hygiene Kits
Hygiene Kits
Hygiene Kits
Matrix™
Matrix™
SmartFit® Detectable
Thunder® Helmet Earmuffs
Thunder® Helmet Earmuffs
Leightning® Helmet Earmuffs
Leightning® Helmet Earmuffs
Matrix™
Leight® Source 500 Earplug Dispenser
Leight® Source 500 Earplug Dispenser
Leight® Source 500 Earplug Dispenser
Leight® Source 400 Earplug Dispenser
Leight® Source 400 Earplug Dispenser
Leight® Source 400 Earplug Dispenser
Leight® Source 400 Earplug Dispenser
Leight® Source 400 Earplug Dispenser
Leight® Source 400 Earplug Dispenser
Leight® Source 400 Earplug Dispenser
Leight® Source 400 Earplug Dispenser
Leightning® Neckband Earmuffs
Leightning® Folding Earmuffs
Impact™ Sport
Leightning® Headband Earmuffs
Leightning® Folding Earmuffs
Leightning® Helmet Earmuffs
Radio Hi-Visibility
Impact™ Sport
Impact™ Sport
AirSoft®
AirSoft®
AirSoft®
Thunder® Headband Earmuffs
II & Oryon, Petzl Vertex
Polar hood
Polar hood
Howard Leight® Forestry Kit
Howard Leight® Garden Kit
Howard Leight® Forestry Kit
Howard Leight® Forestry Kit
Leight® Source 500 Earplug Dispenser
Leight® Source 500 Earplug Dispenser
Howard Leight® Forestry Kit
Laser Lite®
Laser Lite®
MultiMax®
Max Lite®
Max Lite®
Max®
Max®
Leight® Source 500 Earplug Dispenser
Laser Trak®
Quiet®
Quiet®
QB2HYG®
QB3HYG®
Leight® Source 500 Earplug Dispenser
Leight® Source 500 Earplug Dispenser
Leight® Source 500 Earplug Dispenser
Leight® Source 500 Earplug Dispenser
Leight® Source 500 Earplug Dispenser
QB3HYG®
QB2HYG®
QB1HYG®
QB1HYG®
Optisorb
VeriPRO™ Earplug Fit Testing System
page
17
23
17
19
23
9
9
13
18
18
17
17
9
10
10
10
10
10
10
10
10
10
10
10
16
16
21
16
16
17
22
21
23
12
12
12
18
23
24
24
17
17
17
17
10
10
17
8
8
8
8
8
8
8
10
13
11
11
15
15
10
10
10
10
11
15
15
15
15
24
14
Description
10 000 02
10 000 03
10 000 04
10 000 05
10 000 06
10 000 09
10 000 10
10 000 11
10 000 13
10 000 15
10 000 16
10 000 17
10 000 18
10 000 20
10 020 97
10 021 03
10 021 56
10 021 63
10 021 64
10 021 66
10 021 70
10 021 71
10 022 21
10 022 23
10 022 24
10 022 67
10 022 70
10 022 94
10 022 95
10 022 97
10 023 02
10 023 04
10 023 05
10 023 07
10 023 08
10 023 09
10 023 10
10 023 12
10 023 16
10 023 18
10 023 21
10 023 23
10 023 25
10 023 27
10 023 28
10 023 29
10 023 30
10 023 37
10 023 41
10 023 46
10 023 53
10 023 54
10 023 59
10 023 60
10 023 66
10 023 97
10 024 18
10 024 20
10 025 49
10 025 50
10 026 75
10 026 76
10 026 77
10 027 81
10 027 82
10 027 83
10 027 87
10 027 88
10 045 83
10 045 84
10 045 87
10 049 47
10 049 48
10 049 49
10 049 60
10 052 12
10 055 04
10 055 07
10 055 09
10 055 64
10 055 72
10 059 81
10 059 82
Sperian Millennia™
Sperian Millennia™
Sperian Millennia™
Sperian Millennia™
Sperian Millennia™
Sperian Millennia™
Sperian Millennia™
Sperian Millennia™
Sperian Millennia™
Sperian Millennia™
Op-Tema®
Op-Tema®
Op-Tema®
Op-Tema®
Noris™
Noris™
Noris™
Armamax 520™
Armamax 520™
Armamax 520™
Armamax 585™
Armamax 585™
Armamax ax™
Armamax ax™
Armamax ax™
Hi-Style™
Hi-Style™
Clearways™
Supervizor
Supervizor
Supervizor
Supervizor
Supervizor
Supervizor
Supervizor
Supervizor
Supervizor
Supervizor
Supervizor
Supervizor
Supervizor
Supervizor
Supervizor
Supervizor
Supervizor
Supervizor
Supervizor
Supervizor
Clearways™
Clearways™
Clearways™
Clearways™
Clearways™
Clearways™
Clearways™
Supervizor
Robusta™
Robusta™
Polysafe™
Polysafe™
Santa Cruz™
Santa Cruz™
Santa Cruz™
Sperian Millennia™
Sperian Millennia™
Sperian Millennia™
Sperian Millennia™
Sperian Millennia™
Supervizor
Supervizor
Supervizor
Op-Tema®
Op-Tema®
Op-Tema®
Op-Tema®
Sperian Millennia™
LG10 & LG20
LG10 & LG20
LG10 & LG20
Stellar™
Stellar™
Sperian Millennia Sport™
Sperian Millennia Sport™
page
34
34
34
34
34
34
34
34
34
34
37
37
37
37
42
42
42
39
39
39
39
39
39
39
39
37
37
46
45
44
44
44
44
45
45
45
45
45
45
44
44
44
44
44
45
45
45
44
46
46
46
46
46
46
46
45
42
42
38
38
37
37
37
34
34
34
34
34
45
45
45
37
37
37
37
34
42
42
42
38
38
34
34
Ref.
Description
10 059 85
10 059 86
10 059 87
10 059 88
10 060 31
10 060 32
10 061 92
10 061 93
10 061 94
10 061 95
10 061 96
10 064 05
10 064 06
10 064 37
10 075 06
10 081 10
10 081 11
10 081 12
10 109 49
10 109 50
10 110 10
10 110 12
10 110 13
10 110 15
10 110 16
10 110 17
10 110 18
10 110 19
10 110 20
10 110 21
10 110 22
10 110 23
10 110 24
10 110 25
10 110 26
10 110 27
10 110 70
10 110 71
10 110 72
10 113 32
10 113 33
10 113 81
10 113 82
10 113 85
10 113 86
10 116 23
10 116 24
10 116 25
10 116 26
10 116 27
10 116 28
10 116 29
10 119 33
10 119 34
10 121 00
10 126 11
10 126 12
10 126 13
10 126 14
10 126 15
10 126 16
10 126 18
10 126 41
10 127 26
10 127 27
10 127 28
10 127 29
10 127 85
10 127 86
10 127 87
10 127 88
10 127 89
10 128 20
10 128 21
10 128 22
10 128 23
10 128 24
10 128 25
10 128 26
10 128 27
10 128 28
10 128 29
10 128 60
Sperian Millennia Sport™
Sperian Millennia Sport™
Sperian Millennia Sport™
Sperian Millennia Sport™
Sperian Millennia Sport™
Sperian Millennia Sport™
V-Maxx®
V-Maxx®
V-Maxx®
V-Maxx®
V-Maxx®
Sperian Millennia™
Sperian Millennia™
V-Maxx®
V-Maxx®
V-Maxx®
V-Maxx®
LG10 & LG20
XC®
XC®
XC®
XC®
XC®
XC®
XC®
XC®
XC®
XC®
XC®
XC®
XC®
XC®
XC®
XC®
XC®
XC®
Flex Seal®
Flex Seal®
Flex Seal®
Cleaning tissues & solutions
Flex Seal®
Flex Seal®
Flex Seal®
Flex Seal®
Flex Seal®
Bionic®
Bionic®
Bionic®
Bionic®
Bionic®
Bionic®
Bionic®
Bionic®
Bionic®
XC®
Pivot®
Pivot®
Pivot®
Pivot®
Pivot®
Pivot®
Pivot®
Pivot®
Venom®
Venom®
Venom®
Venom®
Pivot®
Pivot®
Pivot®
Pivot®
Pivot®
Pivot®
Pivot®
Pivot®
Pivot®
Pivot®
Pivot®
Pivot®
Pivot®
Pivot®
Pivot®
Pivot®
page
34
34
34
34
34
34
41
41
41
41
41
34
34
41
41
41
41
42
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
31
41
41
41
47
40
40
40
40
40
43
43
43
43
43
43
43
43
43
31
32
32
32
32
32
32
32
32
35
35
35
35
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
32
EYE & FACE PROTECTION
Ref.
207
EYE & FACE PROTECTION
Ref.
Description
10 128 77
10 128 79
10 129 00
10 129 01
10 129 02
10 129 10
10 133 37
10 133 38
10 133 39
10 133 40
10 133 41
10 133 42
10 133 43
10 140 02
10 140 05
10 140 06
10 140 08
10 140 09
10 140 10
10 140 11
10 140 12
10 140 13
10 140 14
10 142 90
10 142 92
10 142 93
10 142 94
10 142 95
10 142 96
10 142 97
10 142 98
10 142 99
10 143 00
10 143 01
10 151 12
10 151 13
10 151 61
10 152 40
10 152 50
10 153 50
10 153 51
10 153 53
10 153 60
XC®
XC®
XC®
XC®
XC®
XC®
FitLogic®
FitLogic®
FitLogic®
FitLogic®
FitLogic®
FitLogic®
FitLogic®
FitLogic®
FitLogic®
FitLogic®
FitLogic®
FitLogic®
FitLogic®
FitLogic®
FitLogic®
FitLogic®
FitLogic®
Metalite®
Metalite®
Metalite®
Metalite®
Metalite®
Duality™
Duality™
Duality™
Duality™
Duality™
Duality™
Bionic®
Bionic®
Bionic®
Bionic®
XC®
A 800
A700
Protégé™
A700
WELDING
Ref.
208
1002.030
1004.032
1004.033
1004.035
1004.036
1004.040
1004.041
1004.050
1004.051
1005.000
1005.001
1005.002
1005.003
1005.004
1005.005
1005.010
1005.011
1005.012
1005.013
1005.014
1005.015
1005.020
1005.030
1005.040
1005.050
1006.100
1006.110
1006.120
1006.130
1006.200
1006.210
1006.300
1006.310
1006.400
1006.410
3000.008
3000.009
3000.010
Description
Optrel STAR
Optrel p420
Optrel p420
Optrel p410
Optrel p410
Optrel p450
Optrel p450
Optrel p430
Optrel p430
Optrel b110
Optrel b110
Optrel b110
Optrel b110
Optrel b110
Optrel b110
Optrel b120
Optrel b120
Optrel b120
Optrel b120
Optrel b120
Optrel b120
Optrel b130
Optrel b310
Optrel b320
Optrel b330
Optrel e680
Optrel e680
Optrel e680
Optrel e680
Optrel e670
Optrel e670
Optrel e650
Optrel e650
Optrel e640
Optrel e640
Optrel passive Welding Filters
Optrel passive Welding Filters
Optrel passive Welding Filters
page
31
31
31
31
31
31
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
33
33
33
33
33
36
36
36
36
36
36
43
43
43
43
31
35
35
32
35
page
61
59
59
59
59
60
60
60
60
62
62
62
62
62
62
62
62
62
62
62
62
62
64
64
64
50
50
50
50
52
52
53
53
54
54
65
65
65
Ref.
Description
10 153 61
10 153 62
10 153 63
10 153 64
10 153 66
10 153 67
10 153 68
10 153 69
10 153 70
10 154 40
10 154 41
10 156 89
10 157 10
10 160 70
10 160 71
10 160 72
10 160 73
10 160 74
10 160 75
10 165 11
10 165 12
10 170 80
10 170 81
10 170 82
10 170 83
10 170 84
10 170 85
10 170 86
10 170 87
10 170 88
10 170 89
30 238 30
30 240 40
30 240 41
30 240 42
30 240 75
30 241 30
30 241 47
36 970 79
36 970 80
36 970 94
36 970 95
A700
A700
Protégé™
Protégé™
Protégé™
A 800
A 800
A 800
A 800
A700
A700
Protégé™
Protégé™
Duality™
Duality™
Duality™
Duality™
Duality™
Duality™
Duality™
Duality™
Ignite™
Ignite™
Ignite™
Ignite™
Ignite™
Ignite™
Ignite™
Ignite™
Ignite™
Ignite™
Sperian Horizon
Sperian Horizon
Sperian Horizon
Sperian Horizon
Sperian Horizon
Sperian Horizon
Sperian Horizon
Electrical face shields
Electrical face shields
Electrical face shields
Electrical face shields
Ref.
3000.011
3000.012
3000.013
3000.022
3000.050
3000.051
3000.052
3021.300
3021.402
3037.000
3800.014
3800.015
3800.029
3800.070
3800.071
3800.079
3800.227
3800.248
3800.249
3800.253
3800.257
3800.258
3800.259
3800.261
3800.262
3800.266
3800.289
3800.452
3800.756
3810.351
3890.008
4028.015
4028.016
4028.031
4074.001
4088.000
4155.000
4155.002
Description
Optrel passive Welding Filters
Optrel passive Welding Filters
Optrel passive Welding Filters
Optrel clear lenses
Optrel passive Welding Filters
Optrel passive Welding Filters
Optrel passive Welding Filters
Other Optrel spare parts
Optrel b210
Optrel b210
Optrel b210
Optrel b210
Optrel b220
Optrel b520 & b530
Optrel b520 & b530
Optrel b420 & b430
Optrel b220
Optrel passive Welding Filters
Optrel passive Welding Filters
Optrel passive Welding Filters
Optrel clear lenses
Optrel clear lenses
Optrel clear lenses
Optrel clear lenses
Optrel clear lenses
Optrel clear lenses
Optrel b420 & b430
Other Optrel spare parts
Other Optrel spare parts
Optrel b230
Optrel b220
ACCESSORIES
ACCESSORIES
Other Optrel e1100 SPARE PARTS
Other Optrel e1100 SPARE PARTS
Optrel e1100
Optrel e1100
Optrel e1100
page
35
35
32
32
32
35
35
35
35
35
35
32
32
36
36
36
36
36
36
36
36
33
33
33
33
33
33
33
33
33
33
36
36
36
36
36
36
36
46
46
46
46
page
65
65
65
65
65
65
65
65
63
63
63
63
63
65
65
65
63
65
65
65
65
65
65
65
65
65
65
65
65
63
63
58
58
58
58
57
57
57
4155.003
4155.003
4155.004
4155.021
4155.022
4155.030
4160.000
4240.003
4241.003
4242.003
4251.000
4255.001
4255.006
4255.007
4260.001
4261.000
4261.001
4262.000
4262.001
4270.000
4280.000
4281.000
4282.000
5000.001
5000.011
5000.012
5000.013
5000.050
5000.051
5000.052
5000.053
5000.105
5000.105
5000.210
5000.212
5000.221
5000.300
5000.300
5000.350
5000.400
5000.450
5000.490
5000.490
5000.500
Optrel e1100
Optrel e1100
Other Optrel e1100 SPARE PARTS
Optrel e1100
Other Optrel e1100 SPARE PARTS
Other Optrel e1100 SPARE PARTS
Optrel e1100
Optrel e1100
Optrel e1100
Other Optrel e1100 SPARE PARTS
Optrel e1100
Other Optrel e1100 SPARE PARTS
Optrel e1100
Optrel e1100
Optrel e1100
Optrel e1100
Optrel e1100
Other Optrel e1100 SPARE PARTS
Other Optrel e1100 SPARE PARTS
Optrel e1100
Optrel e1100
Optrel e1100
Other Optrel e1100 SPARE PARTS
Optrel Inside cover lens
Optrel e680, e670, e650 accessories
Optrel e680, e670, e650 accessories
Optrel e680, e670, e650 accessories
Optrel e680, e670, e650 accessories
Optrel e680, e670, e650 accessories
Optrel e680, e670, e650 accessories
Optrel e680, e670, e650 accessories
Optrel front cover lenses
Optrel front cover lenses
Optrel front cover lenses
Optrel front cover lenses
Optrel front cover lenses
Optrel Inside cover lens
Optrel Inside cover lens
Optrel e640 & Optrel OSC accessories
Optrel e640 & Optrel OSC accessories
Optrel e640 & Optrel OSC accessories
other Optrel spare parts
Other Optrel spare parts
Optrel e640 & Optrel OSC accessories
Ref.
Description
10 006 05
10 015 58
10 015 73
10 015 74
10 015 75
10 015 76
10 015 77
Freedom
MX/PF F950
VALUAIR
VALUAIR
PREMIER
PREMIER
Sperian filters for half-face masks: Valuair MX/PF F950 and Optifit Twin full-face mask
Sperian filters for half-face masks: Valuair MX/PF F950 and Optifit Twin full-face mask
Sperian filters for half-face masks: Valuair MX/PF F950 and Optifit Twin full-face mask
Sperian filters for half-face masks: Valuair MX/PF F950 and Optifit Twin full-face mask
Sperian filters for half-face masks: Valuair MX/PF F950 and Optifit Twin full-face mask
Sperian filters for half-face masks: Valuair MX/PF F950 and Optifit Twin full-face mask
Sperian filters for half-face masks: Valuair MX/PF F950 and Optifit Twin full-face mask
Sperian filters for half-face masks: Valuair MX/PF F950 and Optifit Twin full-face mask
Sperian filters for half-face masks: Valuair MX/PF F950 and Optifit Twin full-face mask
Sperian filters for half-face masks: Valuair MX/PF F950 and Optifit Twin full-face mask
Sperian filters for half-face masks: Valuair MX/PF F950 and Optifit Twin full-face mask
Freedom
Freedom
Freedom
Freedom
Freedom
10 015 78
10 015 79
10 015 80
10 015 81
10 015 83
10 015 84
10 015 85
10 015 86
10 015 87
10 015 90
10 015 91
10 015 92
10 015 97
10 015 98
10 015 99
page
57
58
58
57
58
58
57
56
57
58
57
58
57
57
56
57
57
58
58
56
56
57
58
58
58
58
58
58
58
58
58
58
61
58
58
61
58
61
58
58
58
58
61
58
page
72
74
74
74
74
74
Ref.
Description
5000.600
5000.700
5000.800
5000.860
5000.862
5001.049
5001.055
5001.600
5001.601
5001.602
5001.603
5001.604
5001.605
5001.606
5001.610
5001.610
5001.611
5001.910
5001.911
5001.912
5001.912
5001.913
5001.913
5002.058
5002.062
5002.067
5003.250
5003.250
5003.260
5003.500
5003.501
5004.073
5004.073
5011.180
5012.010
5012.046
5012.084
5012.112
5012.300
5012.400
5012.420
5012.440
5012.460
5012.511
Optrel e640 & Optrel OSC accessories
Optrel e640 & Optrel OSC accessories
Optrel e640 & Optrel OSC accessories
Other Optrel spare parts
Other Optrel spare parts
Optrel STAR
Optrel OSC
Optrel e680
Optrel e680
Optrel e680
Optrel e680
Optrel e670
Optrel e650
Optrel e640
Optrel e670
Optrel e670
Optrel e640
Optrel p450
Optrel p450
Optrel p410
Optrel p410
Optrel p410
Optrel p410
Other Optrel spare parts
Other Optrel spare parts
Other Optrel spare parts
Other Optrel spare parts
Other Optrel spare parts
Other Optrel spare parts
Other Optrel spare parts
Other Optrel spare parts
Other Optrel spare parts
Other Optrel spare parts
ACCESSORIES
Optrel p450
Optrel OSC
Optrel STAR
Optrel p430
Optrel p420
Optrel e680
Optrel e670
Optrel e650
Optrel e640
Optrel p410
Ref.
Description
10 016 01
10 016 02
10 016 06
10 016 07
10 016 08
Freedom
Freedom
Freedom
Freedom
Sperian filters for half-face masks: Valuair MX/PF F950 and Optifit Twin full-face mask
Sperian filters for half-face masks: Valuair MX/PF F950 and Optifit Twin full-face mask
Freedom
Sperian filters for half-face masks: Valuair MX/PF F950 and Optifit Twin full-face mask
Sperian filters for half-face masks: Valuair MX/PF F950 and Optifit Twin full-face mask
AIRVISOR
AIRVISOR
AIRVISOR
AIRVISOR MV
AIRVISOR MV
AIRVISOR MV
AIRVISOR MV
Sperian BLUELINE
Sperian BLUELINE
Sperian BLUELINE
Sperian BLUELINE
Sperian BLUELINE
FV-Series
W-Series
TURBOVISOR MV
TURBOVISOR MV
TURBOVISOR MV
TURBOVISOR MV
Freedom
Freedom
10 016 09
Premier 76
Premier 76
10 016 10
10 016 19
76
10 016 20
76
10 016 41
10 016 42
10 016 43
10 016 44
10 016 45
10 016 46
10 016 47
10 017 26
10 017 27
10 017 28
10 017 29
10 017 30
10 017 43
10 017 45
10 017 68
10 017 69
10 017 70
10 017 71
10 028 00
10 028 01
Premier Premier Premier 76
Premier 76
Premier 76
Premier 76
Premier 76
Premier 76
Premier 76
72
72
72
72
72
page
58
58
58
61
58
61
55
50
50
50
50
52
53
54
52
53
54
60
60
59
60
59
60
61
61
61
58
61
65
58
58
58
61
58
60
55
61
60
59
50
52
53
54
59
WELDING
Description
page
72
72
72
72
Premier 76
Premier 76
72
Premier 76
Premier 76
90
90
90
90
90
90
90
92
92
92
92
92
91
91
89
89
89
89
72
72
RESPIRATORY PROTECTION
Ref.
209
RESPIRATORY PROTECTION
210
Ref.
Description
10 035 29
Sperian filters for half-face masks: Valuair - Premier MX/PF F950 and Optifit Twin full-face mask
Sperian Premium 5000
Sperian Premium 5000
Sperian Premium 5000
Sperian Premium 5000
Sperian Premium 5000
Sperian Premium 5000
Sperian Premium 5000
Sperian Premium 5000
Sperian Premium 5000
Sperian Premium 5000
Sperian Premium 5000
Sperian Premium 5000
Sperian Premium 5000
Sperian Premium 5000
Sperian Premium 5000
Sperian Premium 5000
Sperian Super One
Sperian Super One
Sperian Super One
Sperian Super One
Sperian BLUELINE
Sperian 5311
Sperian 5000 High Visibility Series
High Visibility SuperOne
High Visibility SuperOne
Sperian 5000 High Visibility Series
Sperian 5000 High Visibility Series
Sperian 5000 High Visibility Series
Sperian 5000 High Visibility Series
CLEARFLOW 2
CLEARFLOW 2
CLEARFLOW 2
CLEARFLOW 2
CLEARFLOW 2
CLEARFLOW 2
CLEARFLOW 2
CLEARFLOW 2
Accessories
Accessories
Options and Accessories for Zephyr ATEX
Options and Accessories for Zephyr ATEX
The 4BA can be used with the following masks
The 4BA can be used with the following masks
PANORAMASQUE
PANORAMASQUE
PANORAMASQUE
PANORAMASQUE
COSMO
COSMO
COSMO
COSMO
COSMO
COSMO
COSMO
COSMO
PANORAMASQUE
PANORAMASQUE
PANORAMASQUE
PANORAMASQUE
PANORAMASQUE
PANORAMASQUE
OPTIFIT
OPTIFIT
OPTIFIT
Optifit Twin
Optifit Twin
Optifit Twin
Filters for half-face Sperian mask with single filter
Filters for half-face Sperian mask with single filter
Half-face Sperian Plus mask: for single filter operation
Half-face Sperian Plus mask: for single filter operation
Half-face Sperian Plus mask: for single filter operation
Half-face Sperian Plus mask: for single filter operation
Half-face Sperian Plus mask: for single filter operation
10 055 80
10 055 82
10 055 84
10 055 86
10 055 88
10 055 91
10 055 93
10 055 95
10 055 98
10 056 00
10 056 02
10 056 05
10 056 08
10 056 11
10 056 14
10 056 30
10 132 03
10 132 04
10 132 05
10 132 06
10 147 16
10 156 35
10 168 36
10 168 37
10 168 38
10 168 39
10 169 14
10 169 16
10 169 17
10 169 60
10 169 61
10 169 62
10 169 63
10 169 64
10 169 65
10 169 66
10 169 67
17 100 88
17 101 74
17 101 80
17 101 80
17 102 37
17 103 43
17 103 94
17 103 94
17 103 95
17 103 95
17 105 01
17 105 01
17 105 02
17 105 05
17 105 21
17 105 21
17 105 22
17 105 25
17 109 80
17 109 87
17 109 87
17 110 00
17 110 01
17 110 22
17 150 01
17 150 11
17 150 21
17 152 31
17 152 41
17 152 51
17 250 23
17 250 24
17 250 35
17 250 36
17 250 59
17 265 12
17 265 92
page
76
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
70
71
71
71
71
92
71
71
71
71
71
71
71
71
92
92
92
92
92
92
92
92
78
75
86
87
94
94
77
94
77
94
78
94
78
78
78
94
78
78
77
77
94
77
77
77
77
77
77
75
75
75
73
73
73
73
73
73
73
Ref.
Description
17 266 02
17 266 02
17 271 70
17 273 10
17 273 30
17 273 40
17 273 60
17 273 74
17 273 77
17 273 80
17 274 10
17 274 13
17 274 14
17 274 15
17 274 16
17 274 17
17 274 30
17 274 40
17 274 41
17 274 60
17 274 80
17 282 98
17 285 00
17 285 55
17 288 01
17 288 06
17 288 07
17 401 15
17 525 00
17 525 04
17 525 16
17 600 87
17 619 00
17 629 20
17 629 83
17 629 84
17 629 86
17 629 92
17 629 95
17 629 98
17 630 41
17 630 42
17 630 43
17 635 25
17 635 26
17 636 35
17 640 01
17 640 02
17 641 19
17 641 20
17 660 62
17 660 62
17 720 10
17 720 40
17 720 40
17 725 24
17 790 59
17 790 61
17 790 61
17 790 61
17 790 61
17 790 61
17 790 65
17 790 65
17 790 65
17 790 65
17 790 65
17 810 00
17 810 10
17 810 20
17 810 30
17 810 40
17 810 50
17 810 60
17 810 80
17 830 00
For daily care
For daily care
Filters for half-face Sperian mask with single filter
Filters for half-face Sperian mask with single filter
Filters for half-face Sperian mask with single filter
Filters for half-face Sperian mask with single filter
Filters for half-face Sperian mask with single filter
Half-face Sperian Plus mask: for single filter operation
Half-face Sperian Plus mask: for single filter operation
Filters for half-face Sperian mask with single filter
Filters for half-face Sperian mask with single filter
Filters for half-face Sperian mask with single filter
Filters for half-face Sperian mask with single filter
Filters for half-face Sperian mask with single filter
Filters for half-face Sperian mask with single filter
Filters for half-face Sperian mask with single filter
Filters for half-face Sperian mask with single filter
Filters for half-face Sperian mask with single filter
Filters for half-face Sperian mask with single filter
Filters for half-face Sperian mask with single filter
Filters for half-face Sperian mask with single filter
Evamasque
Evamasque
Evamasque
OPENGO
OPENGO
OPENGO
Options and Accessories
4BA
4BA
4BA
Sperian BLUELINE
MC95
MC91A
MC95
MC95
MC95
MC91A
MC91A
MC91A
MC95
MC95
MC95
DE4
DE4
Options and Accessories
Options and Accessories
Sperian BLUELINE
Options and Accessories
Options and Accessories
For daily care
For daily care
Accessories
Accessories
Accessories
Accessories
For daily care
For daily care
For daily care
For daily care
For daily care
For daily care
For daily care
For daily care
For daily care
For daily care
For daily care
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
page
75
78
73
73
73
73
73
73
73
73
73
73
73
73
73
73
73
73
73
73
73
81
81
81
81
81
81
94
94
94
94
92
93
93
93
93
93
93
93
93
93
93
93
94
94
94
94
92
94
94
75
78
78
75
78
78
75
75
78
86
87
88
75
78
86
87
88
80
80
80
80
80
80
80
80
80
17 830 00
17 830 00
17 830 00
17 830 00
17 830 10
17 830 10
17 830 10
17 830 10
17 830 20
17 830 30
17 830 40
17 830 40
17 830 40
17 830 40
17 830 40
17 830 50
17 830 60
17 830 80
17 830 80
17 830 80
17 830 80
17 840 00
17 840 10
17 840 20
17 840 30
17 840 40
17 840 50
17 840 60
17 840 80
17 841 40
17 850 00
17 850 00
17 850 00
17 850 00
17 850 00
17 850 10
17 850 10
17 850 10
17 850 10
17 850 10
17 850 11
17 850 12
17 850 14
17 850 16
17 850 18
17 850 19
17 850 20
17 850 25
17 850 30
17 850 40
17 850 40
17 850 40
17 850 40
17 850 40
17 850 50
17 850 60
17 850 80
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Aluminium filters
Ref.
Description
20 000 42
20 000 93
20 000 98
20 016 15
20 016 17
20 082 36
20 082 44
20 098 10
20 128 97
20 128 98
20 128 99
20 129 25
20 129 28
20 129 45
20 129 50
20 129 53
GREEN WELDING PLUS
SPLIT RIGGER BROWN
WINTER FIT
WINTER PROOF DRIVER
WINTER PROOF DRIVER
PETRONYL 27 GK
PETRONYL 40 GR
FINEDEX® 098-10 PVC SOFT
OVERGLOVE LT
OVERGLOVE LT
OVERGLOVE LT
TUFFSHIELD® Evolution Heavy
TUFFSHIELD® Evolution Heavy
TUFFSHIELD® Evolution Heavy
TUFFSHIELD® Evolution Medium
TUFFSHIELD® Evolution Heavy
page
84
86
87
88
80
84
86
87
80
80
80
84
86
87
88
80
80
80
84
86
87
80
80
80
80
80
80
80
80
80
80
84
86
87
88
80
84
86
87
88
80
80
80
80
80
80
80
80
80
80
84
86
87
88
80
80
80
page
118
106
121
121
121
127
127
124
129
129
129
116
116
116
116
116
Ref.
Description
17 850 80
17 850 80
17 850 80
17 860 00
17 860 00
17 860 00
17 860 00
17 860 00
17 861 10
17 867 10
17 867 30
17 880 00
17 880 05
17 880 10
17 880 15
17 880 20
17 880 25
17 880 70
17 880 75
17 881 00
17 881 05
17 881 10
17 881 15
17 881 20
17 881 25
17 881 40
17 881 45
17 881 50
17 881 55
17 881 61
17 881 66
17 881 70
17 881 75
17 881 90
17 930 19
Aluminium filters
Aluminium filters
Aluminium filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Aluminium filters
Aluminium filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Plastic filters
Complete assisted ventilation Zephyr by Sperian unit
with optoelectronic mask Optrel e680
17 930 37 Complete assisted ventilation Zephyr by Sperian unit
with optoelectronic mask Optrel e680
17 930 38 Complete assisted ventilation Zephyr by Sperian unit
with optoelectronic mask Optrel e680
17 931 00 Options and Accessories for Zephyra
17 931 00 Options and Accessories for Zephyra
17 931 59 Zephyra: ZEPHYR-Asbestos
17 931 60 Zephyra: ZEPHYR-Asbestos
17 931 77 Options and Accessories for Zephyr ATEX
17 932 20 Zephyra: ZEPHYR-Asbestos
17 932 21 Zephyra: ZEPHYR-Asbestos
17 932 22 Zephyra: ZEPHYR-Asbestos
17 932 23 Zephyra: ZEPHYR-Asbestos
17 932 24 Zephyra: ZEPHYR-Asbestos
17 932 25 Zephyra: ZEPHYR-Asbestos
17 932 40 Zephyra: ZEPHYR-Asbestos
17 932 43 Zephyra: ZEPHYR-Asbestos
17 932 45 Zephyra: ZEPHYR-Asbestos
17 932 46 Zephyra: ZEPHYR-Asbestos
30 223 00-STD Accessories
Ref.
Description
20 129 57
20 320 83
20 320 86
20 321 00
20 321 01
20 491 32
20 492 60
20 492 92
20 492 96
20 545 14
20 556 00
20 557 00
20 557 01
20 557 02
20 586 85
20 586 86
TUFFSHIELD® Evolution Heavy
ARACUT®
ARACUT®
ARATHERMA FIRST
JUNKYARD DOG
Velvet Shock
HYDROGRAIN
VELVET CUT
Hydrocut KN
Natureco
HYDRATEX MICRO
HYDRATEX LONG
HYDRATEX VELVET
HYDRATEX VELVET EW
Cryogenic
Chainstop
page
84
86
87
79
84
86
87
88
79
80
80
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
RESPIRATORY PROTECTION
Description
88
88
88
87
88
87
87
86
87
87
87
87
87
87
87
87
87
87
78
page
116
114
114
119
114
131
106
113
113
131
105
105
105
105
130
131
PROTECTIVES GLOVES
Ref.
211
PROTECTIVES GLOVES
CLOTHING
212
Ref.
Description
20 919 03
20 919 07
20 919 12
20 919 21
20 919 31
20 919 41
20 919 42
20 920 12
20 920 15
20 941 40
20 941 41
20 941 45
20 941 50
20 944 01
20 944 02
20 944 05
20 944 20
20 944 21
20 944 30
20 944 31
20 944 32
20 948 30
20 948 31
20 948 36
20 950 10
20 950 20
20 950 25
20 950 30
20 950 35
20 952 25
20 953 01
20 953 04
20 953 20
22 013 36
22 320 37
22 320 70
22 320 86
22 320 87
22 320 89
22 320 92
22 321 01
22 321 10
22 321 11
22 321 12
22 321 13
22 321 16
22 322 30
22 322 31
22 322 33
22 322 34
22 322 35
ELECTROSOFT LATEX CL1
ELECTROSOFT LATEX CL1
ELECTROSOFT LATEX CL1
ELECTROSOFT LATEX CL1
ELECTROSOFT LATEX CL1
ELECTROSOFT LATEX CL1
ELECTROSOFT LATEX CL1
ELECTROSOFT COMPOSITE LINED
ELECTROSOFT COMPOSITE LINED
DEXGRIP
ARACUT® LAT
GRIP LATEX
DEXGRIP LIGHT
FINEDEX® 944-01 CLEAN
FINEDEX® 944-01 CLEAN
POWERCOAT® 950-10 MIX-COLOR
FINEDEX® 944-30
FINEDEX® 944-30
FINEDEX® 944-30
FINEDEX® 944-31
FINEDEX® 944-32
POWERCOAT® 948-30 NITRAF
POWERCOAT® 953-01 NITRAF
POWERCOAT® 953-01 NITRAF
POWERCOAT® 950-10 MIX-COLOR
POWERCOAT® 950-25 NEOFIT
POWERCOAT® 950-25 NEOFIT
POWERCOAT® 950-35 NEOFIT
POWERCOAT® 950-35 NEOFIT
SOFLEX
POWERCOAT® 953-01 NITRAF
POWERCOAT® 953-01 NITRAF
FINEDEX® 953-20 NITRASOFT
TOPFIRE KERMEL
SOFRACOLD GRIP
ARATHERMA NOMEX
ARATHERMA FIT
ARACUT®
ARACUT®
RESISTEX LIGHT GRIP 2
SOFRACOLD GRIP
DYNAGLASS®
DYNAGLASS® GRIP
DYNAGLASS® LAT
DYNAGLASS® NIT
DYNAGLASS® Plus
POLYTRIL™
POLYTRIL™ BLACK
POLYTRIL™ MIX
POLYTRIL™ BLACK PATTERN 3/4
PERFECT CUTTING® MIX
Ref.
Description
41 801 30
41 801 31
41 801 33
41 801 40
41 801 43
41 801 48
41 801 49
41 801 61
45 598 25
45 598 26
Spacel® 2000 EBJ
Spacel® 2000 EBJ
Spacel® 3000 EBJ
Spacel® 3000 EBJ
Hooded jumpsuit
Spacel® 3000 EBJ
Spacel® 3000 RA/EBJ
Spacel® 4000 RA/EBJ
Non-woven overshoes with PE plasticised sole
Non-woven overshoes with PE plasticised sole
page
129
129
129
129
129
129
129
128
128
104
114
104
104
124
124
126
123
123
123
123
123
125
125
125
126
126
126
126
126
104
125
125
124
120
121
119
119
114
114
104
121
110
110
110
110
110
102
102
102
102
107
page
139
139
139
139
140
139
137
137
134
134
Ref.
Description
22 322 36
22 322 40
22 322 42
22 322 44
22 322 45
22 322 46
22 322 51
22 322 52
22 322 55
22 322 70
22 322 73
22 322 75
22 322 77
22 323 10
22 323 11
22 323 13
22 323 15
22 325 10
22 325 11
22 325 13
22 325 15
22 325 16
22 325 17
22 325 51
22 325 53
22 325 54
22 751 12
22 806 73
22 815 61
24 002 50
24 002 51
24 002 56
24 002 60
25000xR0302
253331xA0302
253341xA0302
253351xA0202
41 500 55
44 028 35
45 800 01
45 800 11
45 800 21
45 800 31
45 800 81
45 800 91
45 801 01
45 801 21
45 801 30
45 801 95
SV 825
POLYTRIL™ TOP
PERFECT POLY® FINGER
PERFECT CUTTING® BLACK
PERFECT CUTTING® WHITE
PERFECT CUTTING® GREY
PERFECT CUTTING® GREY PLUS
PERFECT FINGER ESD COPPER
PERFECT FINGER ESD CARBON
PERFECT POLY® WHITE
POLYTRIL™ AIR
POLYTRIL™ AIR COMFORT
PERFECT CUTTING® NIT
PERFECT CUTTING® NIT 3/4
SO-CUT !
SO-CUT ! Grip
SO-CUT ! Nit
SO-CUT ! PU GREY
So-Cut ! Extra
So-Cut ! Extra Grip
So-Cut ! Extra Nit
So-Cut ! Extra PU
So-Cut ! Extra Palm
STEEL MASTER 5
PERFECT CUTTING® EXTRA GRIP
Perfect Cutting® Extra PU
Perfect Cutting® Extra PU
SUPERZETEX MITT
TOPFIRE SUPERTHERMA
Fireman
PERFECT POLY® GREY
PERFECT POLY® BLACK
PERFECT POLY® GREY
PERFECT POLY® SKIN
CHAINEX 2000 REV TEX STRAP
Chainexpert AMB Shoulder
Chainexpert AMB Shoulder
Chainexpert AMB Shoulder
Aracut® Sleeves Reinforced
ARACUT® SLEEVES
DEXPURE® 800-01
DEXPURE® 800-01
DEXPURE® 800-01
DEXPURE® 800-01
DEXPURE® 800-01
DEXPURE® 800-01
DEXPURE® 800-01
DEXPURE® 800-01
DEXPURE® 801-30
DEXPURE® 801-95
TOPFIRE KERMEL
Ref.
Description
45 598 27
45 714 32
45 714 34
45 714 34
45 714 35
45 730 20
45 740 40
45 799 08
45 799 09
45 799 11
Non-woven overshoes with PE plasticised sole
Hooded jumpsuit
Hooded jumpsuit
Hooded jumpsuit
Hooded jumpsuit
Spacel® 3000 RA/EBJ
Spacel® 4000 RA/EBJ
Overboots in white waffle effect polyethylene 130 μ
Overboots in white waffle effect polyethylene 130 μ
Overboots in transparent embossed polyethylene 70 μ
page
102
101
107
107
107
107
101
101
100
103
103
108
108
111
111
111
111
112
112
112
112
112
113
109
109
109
120
120
130
100
100
100
99
117
117
117
117
115
115
122
122
122
122
122
122
122
122
122
122
120
page
134
140
138
140
140
137
137
134
134
134
60 003 10
60 003 20
60 003 21
60 004 00
60 004 01
60 004 10
62 030 01
62 030 02
62 030 03
62 030 04
62 030 05
62 030 06
62 030 07
62 030 08
62 030 09
62 332 15
62 332 16
62 407 48
62 437 01
62 437 03
62 437 05
62 437 15
62 437 17
62 437 21
62 444 10
62 444 11
62 444 13
62 444 15
62 444 16
62 444 21
62 444 25
62 444 26
62 444 56
62 444 57
62 453 21
62 453 31
62 456 58
62 457 00
62 457 01
62 457 11
62 457 15
62 457 16
BACOU BLUE INSOLE
BACOU X-TRA FIT INSOLE
BACOU BAC'RUN INSOLE
BACOU THERMAL BOOTIES
BACOU THERMAL OVERSOCKS
BACOU FRESHNESS SOCKS
BACOU TPT LUNA S3 SRA
BACOU TPT PLAZA S3 SRA
BACOU TPT EDEN S1 SRA
BACOU TPT HARMONY GREY S1P SRA
BACOU TPT HARMONY BLACK S1P SRA
BACOU TPT DULCE GREY S1 SRA
BACOU TPT DULCE BLACK S1 SRA
BACOU TPT DULCE WHITE S1 SRA
BACOU TPT SYMPHONY BLUE S3 SRA
BACOU MONT BLANC S3
BACOU MONT BLANC S2
BACOU SUPER MONT BLANC S2
BACOU B’R MARSH S3 CI SRC
BACOU B’R TRACK S3 CI SRC
BACOU B’R EAGLE S1P SRC
BACOU B’R CREEK S3 CI SRC
BACOU B’R PEAK S3 CI SRC
BACOU B’R SIBERIA S3 CI SRC
BACOU TXL PIONNER S2 SRC
BACOU TXL PIONNER S3 SRC
BACOU TXL PIONNER BLACK S3 SRC
BACOU TXL REPORTER S2 CI SRC
BACOU TXL REPORTER S3 CI SRC
BACOU TXL PILOT S3 SRC
BACOU TXL BOSTON S2 SRC
BACOU TXL BOSTON S3 SRC
BACOU TXL EXPLORER RIPPER S3 CI SRC
BACOU TXL FLYER RIPPER S3 CI SRC
BACOU TXL MAX S3 SRC
BACOU TXL FLEX S3 SRC
BACOU TXL BLIZZARD S3 CI SRC
BACOU Bac'Run 700 S1 SRC
BACOU Bac'Run 701 S1P SRC
BACOU Bac'Run 711 S3 SRC
BACOU Bac'Run 715 S2 SRC
BACOU Bac'Run 716 S3
Art. No.
Description
10 028 27
10 028 28
10 028 29
10 028 30
10 028 31
10 028 32
10 028 35
10 028 47
10 028 48
10 028 49
10 028 50
10 028 53
10 028 54
10 028 57
10 028 58
10 028 67
10 028 68
10 028 71
10 028 75
10 028 76
10 028 78
10 028 79
10 028 80
10 028 81
10 028 82
10 028 83
Miller Mightylite MI70
Miller Mightylite MI71
MJ52 – Wire Girder Grip
MJ52 – Wire Girder Grip
MJ52 – Wire Girder Grip
ML00/CS20– Screwgate karabiner
ML03 – Twistlock karabiner
MA02 – One-point DuraFlex® harness
MA02 – One-point DuraFlex® harness
MA04 – Two-point DuraFlex® harness
MA04 – Two-point DuraFlex® harness
MA08 – Three-point DuraFlex® harness
MA08 – Three-point DuraFlex® harness
MA58 – Three-point DuraFlex® harness
MA58 – Three-point DuraFlex® harness
MG00 MicroLoc Cable Grab
MG00 MicroLoc Cable Grab
MI20 Inertia reel fall arrester
Automatic and manual rope grab MF51
Automatic and manual rope grab MF51 / MF52
MC03 Work Positioning Lanyard
MC03 Work Positioning Lanyard
MC03 Work Positioning Lanyard
Restraint Lanyard MD00
Restraint Lanyard MD00
Restraint Lanyard MD02
page
169
169
169
169
170
169
162
162
162
161
161
161
161
161
162
168
168
168
145
145
145
146
146
146
155
155
155
156
156
156
156
156
155
155
157
157
157
153
153
153
153
153
page
184
184
188
188
188
189
189
178
178
178
178
178
178
178
178
187
187
183
187
187
187
187
187
181
181
181
Ref.
Description
62 457 36
62 457 50
62 457 51
62 457 55
62 457 56
62 457 58
62 457 60
62 457 61
62 457 71
62 457 76
62 457 81
62 457 86
62 458 01
62 458 05
62 458 06
62 458 07
62 458 10
62 458 36
62 458 56
62 458 62
62 458 66
62 458 77
62 459 31
62 459 36
65 511 00
65 511 05
65 511 25
65 511 26
65 511 30
65 511 31
65 511 35
65 511 40
65 511 50
65 511 52
65 511 55
65 515 00
65 515 01
65 515 05
65 515 10
65 515 15
65 515 25
BACOU Bac'Run 736 S1P SRC
BACOU Bac'Run 750 S2 SRC
BACOU Bac'Run 751 S3 SRC
BACOU Bac'Run 755 S2 SRC
BACOU Bac'Run 756 S3 SRC
BACOU Bac'Run PRO BTP S3 SRC
BACOU Bac'Run 760 S3 SRC
BACOU Bac'Run 761 S3 CI SRC
BACOU Bac'Run 771 S3 CI SRC
BACOU Bac'Run 776 S3 WR SRC
BACOU Bac'Run 781 S3 WR SRC
BACOU Bac'Run 786 S3 SRC
BACOU Bac'Run 801 S3 SRC
BACOU PRO'CLEAN S2 SRC
BACOU PRO'CLEAN S3 SRC
BACOU PRO'CLEAN BLACK S2 SRC
BACOU SUPER PRO'CLEAN S2 SRC
BACOU Bac'Run FORCE S3 HRO SRC
BACOU Bac'Run CHEMICAL S3 HRO SRC
BACOU B’R SIERRA CLASSE I S3 HI HRO CI SRC
BACOU Bac'Run WELDER S3 HRO SRC
BACOU Bac'Run PROTECTOR S3 HRO HI M SRC
BACOU BSL DEFENDER S3 HRO SRC
BACOU BSL CHALLENGER S3 HRO SRC
BACOU TPT PEARL S2 SRC
BACOU TPT FRESH S1 SRC
BACOU TPT SUCCESS S2 SRC
BACOU TPT SUCCESS S3 SRC
BACOU TPT TOP S2 SRC
BACOU TPT TOP S3 SRC
BACOU TPT IMAGE S2 SRC
BACOU TPT EASY S2 SRC
BACOU TPT LITE S1 SRC
BACOU TPT LITE BLUE S1 SRC
BACOU TPT FINE S1 SRC
BACOU TPT WHITE LABO SB EA SRC
BACOU TPT WHITE LABO EA SRC
BACOU TPT EASY S2 SRC
BACOU TPT EASY S2 SRC
BACOU TPT NACRE S1 SRC
BACOU TPT OFFICE P1
Art. No.
Description
10 028 84
10 028 87
10 028 91
10 028 92
10 028 93
10 028 94
10 028 95
10 028 96
10 028 97
10 028 98
10 028 99
10 029 00
10 029 01
10 029 02
10 029 03
10 029 04
10 029 06
10 029 07
10 029 16
10 029 17
10 029 18
10 029 19
10 029 20
10 029 27
10 029 65
10 030 16
Restraint Lanyard MD02
Restraint Lanyard MD06
Ropes
Ropes
Ropes
Ropes
Ropes
MJ50 – Stainless steel connector
MJ51 – Galvanised Steel Sling
Miller MK00 Telescopic Pole
MK01 Connector
MK02 Scaffold Hook
Shock-absorbing Lanyards ME00
Forked Shock-Absorbing Lanyard
Shock-absorbing Lanyards ME02
Shock-absorbing Lanyards ME03
Shock-absorbing Lanyards ME51
Shock-absorbing Lanyards ME52
MJ00 – Webbing anchorage sling
MJ00 – Webbing anchorage sling
MJ00 – Webbing anchorage sling
MJ00 – Webbing anchorage sling
MN50 - POTEX Portable pivoting davit column
Tree-Pruning Harness
Tree-Pruning Harness
Green Belt
page
153
151
151
151
151
149
152
152
151
150
150
151
152
168
168
168
168
152
149
150
149
149
159
159
167
167
163
163
163
163
164
164
167
165
165
167
167
164
164
167
165
PROFESSIONAL FOOTWEAR
Description
page
181
181
187
187
187
187
187
189
188
188
189
189
181
196
181
181
181
181
188
188
188
188
195
204
204
204
FALL PROTECTION
Ref.
213
FALL PROTECTION
Ref.
Description
10 030 22
10 030 23
10 030 24
10 030 59
10 030 99
10 031 00
10 031 01
10 031 24
10 032 15
10 032 16
10 032 20
10 032 45
10 032 78
10 032 79
10 033 14
10 034 38
10 034 39
10 042 53
10 042 54
10 042 55
10 043 18
10 045 71
10 045 72
10 045 73
10 045 74
10 045 75
10 045 78
10 045 79
10 045 90
10 045 91
10 045 92
10 045 93
10 045 94
10 045 95
10 047 11
10 047 11
10 049 54
10 049 59
10 050 41
10 050 42
10 050 44
10 051 36
10 051 37
10 051 49
10 051 60
10 051 61
10 052 78
10 052 79
10 052 90
10 053 17
Elastokuik Comfort Harness
Elastokuik Comfort Harness
Elastokuik Comfort Harness
MI20 Inertia reel fall arrester
Reglex Machoire
Reglex Machoire
Reglex Machoire
Reglex 3000 - Reinforced lanyard
Shock-absorbing Lanyards AMORSTOP
Shock-absorbing Lanyards AMORSTOP
Shock-absorbing Lanyards AMORSTOP
MJ00 – Webbing anchorage sling
Tree-Surgeon Kit
Tree-Surgeon Kit
Green Belt
RM Harness
RM Harness
Indy Descender
Cam-Clean Ascender
RG9 Automatic Self Descender
GO60 Light Alloy Connector
Miller Mightylite MI54
Miller Mightylite MI56
Miller Mightylite MI55
Miller Mightylite MI57
Miller Mightylite MI58
Shock-absorbing Lanyards ME53
Shock-absorbing Lanyards ME06
Shock-absorbing Lanyards ME05
Shock-absorbing Lanyards ME54
Miller Mightylite MI55
Miller Mightylite MI56
Miller Mightylite MI57
Miller Mightylite MI58
Restraint Lanyard MD02
Restraint Lanyard MD02
MA58 – Three-point DuraFlex® harness
MA08 – Three-point DuraFlex® harness
MN10 Miller Aluminium Tripod
MN20 Manhandler Work Winch
MN20 Manhandler Work Winch
MA60 – Two-point DuraFlex® harness
MA60 – Two-point DuraFlex® harness
MI65 MightEvac Fall Arrest Block
MI65 MightEvac Fall Arrest Block
MI65 MightEvac Fall Arrest Block
Shock-absorbing Lanyards ME54
Shock-absorbing Lanyards ME06
Shock-absorbing Lanyards ME53
ME82 - Manyard® complete with 2 galvanised connectors (ML00),
with TEFLON® finish
ME82 - Manyard® complete with 2 galvanised connectors (ML00),
with TEFLON® finish
ME86 - Manyard® complete with 63mm scaffold hook and
galvanised connector, with TEFLON® finish
ME86 - Manyard® complete with 63mm scaffold hook and
galvanised connector, with TEFLON® finish
ME83 - Manyard® complete with snap hook and galvanised connector,
with TEFLON® finish
ME83 - Manyard® complete with snap hook and galvanised connector,
with TEFLON® finish
MI65 MightEvac Fall Arrest Block
MI65 MightEvac Fall Arrest Block
RG9 Rescue Kit
Miller Minilite™ Fall Limiter
Miller Minilite™ Fall Limiter
Miller Minilite™ Fall Limiter
Tower Harness
Miller DuraFlex® vest harness
Construction Back-Pack Kit (Kit 11)
Rocker Rope Lock
Rope Ascender
Climbers Helmet
Industrial Climbers Seat
ProALLP Tech Descender
Cowstail Sling
Cowstail Sling
10 053 18
10 053 24
10 053 25
10 053 26
10 053 27
10 053 30
10 053 31
10 060 27
10 061 00
10 061 01
10 061 02
10 062 55
10 068 82
10 068 83
10 070 31
10 070 41
10 070 48
10 070 56
10 070 57
10 070 58
10 070 59
214
page
196
196
196
183
205
205
205
205
181
181
181
188
204
204
204
196
196
198
199
199
189
184
184
184
184
184
181
181
196
181
184
184
184
184
181
181
178
178
194
195
195
178
178
194
194
194
181
181
181
180
180
180
180
180
180
194
194
200
183
183
183
195
179
186
198
199
200
200
198
200
200
Ref.
Description
page
10 070 66
10 073 93
10 075 50
10 076 10
10 076 11
10 076 12
10 076 13
10 076 14
10 076 15
10 076 16
10 076 17
10 076 18
10 076 40
10 078 42
10 082 32
10 082 70
10 082 71
10 082 72
10 082 73
10 082 75
10 082 76
10 082 81
10 082 85
10 082 86
10 082 87
10 082 88
10 083 29
10 083 32
10 083 34
10 083 60
10 083 61
10 083 62
10 083 63
10 083 64
10 085 87
10 085 88
183
10 085 94
10 086 71
10 100 40
10 101 41
10 101 68
10 101 77
10 102 14
10 103 26
10 104 70
10 111 90
10 111 91
10 111 92
10 113 44
10 113 45
10 113 46
10 114 71
10 117 00
10 117 01
10 117 02
10 117 05
10 117 06
10 117 11
10 117 28
10 117 29
10 117 42
10 117 43
10 117 46
10 117 47
10 117 50
10 117 51
10 117 70
10 118 90
10 118 91
10 118 93
10 118 94
10 118 95
10 118 96
10 118 97
10 118 98
10 118 99
Beam Glide
188
Rope Ascender
199
Miller DuraFlex® vest harness
179
Miller Serpent Temporary Horizontal Lifeline
188
MA04 – Two-point DuraFlex® harness
178
MA04 – Two-point DuraFlex® harness
178
MH00 Anchorage Line
187
MH00 Anchorage Line
187
MH00 Anchorage Line
187
MH00 Anchorage Line
187
MH00 Anchorage Line
187
Automatic and manual rope grab MF51 / MF52
187
Automatic and manual rope grab MF51
187
Construction Back-Pack Kit (Kit 11)
186
TITAN Work Positioning Belt
190
TITAN F Restraint Lanyard
192
TITAN F Restraint Lanyard
192
TITAN F Restraint Lanyard
192
TITAN R14
192
TITAN B
191
TITAN B1
191
TITAN C3
191
TITAN FPL Work Positioning Lanyard
190
TITAN FPL Work Positioning Lanyard
190
TITAN FPL Work Positioning Lanyard
190
TITAN FPL Work Positioning Lanyard
190
TITAN CMS Personal Fall Arrester
192
TITAN CMS Personal Fall Arrester
192
TITAN CMS Personal Fall Arrester
192
TITAN Anchorage Sling
192
TITAN Anchorage Sling
192
TITAN Anchorage Sling
192
TITAN Anchorage Sling
192
TITAN Anchorage Sling
192
Miller Scorpion™ PFL with screwgate karabiner and swivel snap hook
183
Miller Scorpion™ PFL with swivel scaff hook (63mm) and snap hook (22mm)
Miller Scorpion™ PFL with swivel karabiner and alloy scaff hook (63mm) 183
Adjustable Barracuda™ Scaffolding Lanyard
180
Miller DuraFlex® Hi-Vis Vest Harness
179
Barracuda™ Scaffolding Lanyard
180
Shorco Sling and Foot Loop Set
199
Climbers Helmet
200
Rope Protector
200
Miller DuraFlex® Hi-Vis Vest Harness
179
Barracuda™ Scaffolding Manyard®
180
TITAN Automatic Rope Grab
191
TITAN Automatic Rope Grab
191
TITAN Automatic Rope Grab
191
TITAN Automatic Rope Grab
191
TITAN Automatic Rope Grab
191
TITAN Automatic Rope Grab
191
Miller Pulley
195
TITAN Automatic Rope Grab
191
Butterfly II Belt
202
Butterfly II Belt
202
Attachment Bridge
203
Attachment Bridge
203
Snap hook
203
Miller Falcon™ Self-Retracting Lifelines
185
Miller Falcon™ Self-Retracting Lifelines
185
Miller Falcon™ Self-Retracting Lifelines
185
Miller Falcon™ Self-Retracting Lifelines
185
Miller Falcon™ Self-Retracting Lifelines
185
Miller Falcon™ Self-Retracting Lifelines
185
Miller Falcon™ Self-Retracting Lifelines
185
Miller Falcon™ Self-Retracting Lifelines
185
Tower Harness
195
TITAN 1-point harness
190
TITAN 2-point harness
190
TITAN 1-point harness with positioning belt
190
TITAN 2-point harness with positioning belt
190
TITAN Roofers Kit
193
TITAN Fall Arrest Kit
193
TITAN Restraint Kit
193
TITAN Construction Kit
193
TITAN Work Positioning Kit
193
Description
10 122 30
10 122 31
10 122 32
10 123 36
10 123 37
10 123 38
10 123 92
10 124 10
10 124 90
10 124 91
10 128 33
10 134 30
10 134 31
10 134 54
10 134 55
10 136 41
10 137 24
10 137 25
10 137 26
10 137 27
10 137 28
10 137 29
10 140 21
10 140 22
10 140 23
10 142 20
10 142 31
10 142 32
10 142 33
10 142 34
10 142 35
10 142 36
10 142 37
10 142 38
10 142 39
10 142 40
10 142 41
10 142 42
10 142 43
10 142 44
10 142 45
10 142 46
10 142 47
10 142 48
10 142 49
10 142 50
10 142 51
10 142 53
10 142 54
10 142 55
10 142 56
10 142 70
10 142 71
10 142 72
10 142 73
10 142 74
10 142 75
10 142 76
10 142 78
10 142 79
10 142 80
Aluminium Ring
Pair of bow shackles
Attachment Bridge
Miller Kevlar Harness 650K
Miller Kevlar Harness 650K
Miller Kevlar Harness 650K
Miller Black Rhino Self Retracting Lifelines
Miller Black Rhino Self Retracting Lifelines
Tool Bandit
Tool Bandit
Alloy screwgate karabiner
TITAN A3
TITAN Forked
Miller DuraFlex® Vest Harness
Miller DuraFlex® Vest Harness
Butterfly II Belt
Butterfly II Harness
Butterfly II Harness
Butterfly II Harness
Dragonfly Harness
Dragonfly Harness
Dragonfly Harness
Reinforced Rocker positioning lanyard
Reinforced Rocker positioning lanyard
Reinforced Rocker positioning lanyard
Revolution R1 with DuraFlex®
Revolution R1 with DuraFlex®
R1 Miller® Revolution Basic
R1 Miller® Revolution Basic
R1 Miller® Revolution Basic
R1 Miller® Revolution Basic
Revolution R2 with DuraFlex®
Revolution R2 with DuraFlex®
R2 Miller® Revolution Comfort
R2 Miller® Revolution Comfort
R2 Miller® Revolution Comfort
R2 Miller® Revolution Comfort
R3 Miller® Revolution Premium
R3 Miller® Revolution Premium
R3 Miller® Revolution Premium
R4 Miller® Revolution Telecom & Utilities Harness
R4 Miller® Revolution Telecom & Utilities Harness
R4 Miller® Revolution Telecom & Utilities Harness
R4 Miller® Revolution Telecom & Utilities Harness
R4 Miller® Revolution Telecom & Utilities Harness
R4 Miller® Revolution Telecom & Utilities Harness
R5 Miller® Revolution Premium Telecom & Utilities Harness
R5 Miller® Revolution Premium Telecom & Utilities Harness
R5 Miller® Revolution Premium Telecom & Utilities Harness
R5 Miller® Revolution Premium Telecom & Utilities Harness
R5 Miller® Revolution Premium Telecom & Utilities Harness
Accessories
Accessories
Accessories
Accessories
Accessories
Accessories
Accessories
Accessories
Accessories
Accessories
page
203
203
203
179
179
179
184
184
186
186
189
191
191
179
179
202
202
202
202
202
202
202
205
205
205
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
176
177
177
177
177
177
177
177
177
177
177
Art. No.
Description
10 142 81
10 143 30
10 144 32
10 144 33
10 144 34
10 144 35
10 144 91
10 146 30
10 146 31
10 150 74
10 150 75
10 151 10
10 151 11
10 151 92
10 152 05
10 152 06
10 163 71
10 163 72
10 163 73
10 163 74
10 163 75
10 163 76
10 163 77
10 163 78
10 163 79
10 163 80
10 163 81
10 164 90
10 166 81
10 166 82
10 166 83
10 167 93
10 167 94
10 167 95
10 167 96
10 168 24
10 168 25
10 168 26
10 168 40
Accessories
TITAN A2
Miller ROPAX harness
Miller ROPAX harness
Miller ROPAX harness
Miller ROPAX harness
Climbing Spikes
Miller DuraFlex® Hi-Vis Vest Harness
Miller DuraFlex® Hi-Vis Vest Harness
Miller Atex Antistatic harness
Miller Atex Antistatic harness
Miller ROPAX harness
Miller ROPAX harness
Green Belt
ErgoSoft Dorsal Pad
Tranversal Pad
RG9 Automatic Self Descender
RG9 Automatic Self Descender
RG9 Automatic Self Descender
RG9 Automatic Self Descender
RG9 Automatic Self Descender
RG9 Automatic Self Descender
RG9 Automatic Self Descender
RG9 Automatic Self Descender
RG9 Automatic Self Descender
RG9 Automatic Self Descender
RG9 Automatic Self Descender
Chainsaw lanyard
Dragonfly II Belt
Dragonfly II Belt
Dragonfly II Belt
Miller Falcon 6m
Miller Falcon 6m
Miller Falcon 6m
Miller Falcon 6m
Morpho
Morpho
Morpho
SCORPION Tested on edge CS20 +SnapHook+specific webbing
resistant to breakage against edges
SCORPION Tested on edge CS20 + Karabiner Opening 63mm
+ specific webbing resistant to breakage against edges
SCORPION Tested on edge SnapHook + Karabiner Opening 55mm
+ specific webbing resistant to breakage against edges
Rope lanyard with shock absorber 2m D12 Tested on edge +ScafHk/MS51
Rope lanyard with shock absorber 2m D12 Tested on edge +ML00/ML00
Rope lanyard with shock absorber 2m D12 Tested on edge +ScafHk/ML00
Double rope lanyard with shock absorber 1,5m D12
Tested on edge +2SHk/ML00
Morpho
Miller Turbo Lite
2m MANYARD Tested on edge + Scaffold hook with large opening +
Screwgate karabiner
2m MANYARD Tested on edge + 2 Screwgate karabiners
Miller Turbo Lite
Miller Turbo Lite
Miller Turbo Lite
TurboLite Kit
R5 Miller® Revolution Premium Telecom & Utilities Harness
Tool Bandit
Miller Relief Step
10 168 41
10 168 42
10 168 47
10 168 48
10 168 49
10 168 50
10 175 92
10 179 00
10 179 16
10 179 18
10 180 13
10 180 14
10 180 15
10 281 34
10142 52
11 002 10
11 002 11
page
177
191
197
197
197
197
205
179
179
179
179
197
197
204
197
197
199
199
199
199
199
199
199
199
199
199
199
203
202
202
202
182
182
182
182
201
201
201
FALL PROTECTION
Art. No.
175
175
175
175
175
175
175
201
182
174
174
182
182
182
186
176
186
186
215
Download PDF